Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Mu et al., “The 648 MHz klystron power source system of CSNS-II Linac superconducting ellipsoid cavity”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 699-701. doi:10.18429/JACoW-LINAC2024-THPB032
[n] Z. Li and L. Xiao, “A Compact Alternative Crab Cavity Design at 400-MHz for the LHC Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP047, pp. 2104-2106.
[n] P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2301-2304.
[n] A. D. Palczewski, C. E. Reece, M. J. Kelley, and J. Tuggle, “Investigation of Nitrogen Absorption Rate and Nitride Growth on SRF Cavity Grade RRR Niobium as a Function of Furnace Temperature”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 744-747. doi:10.18429/JACoW-LINAC2016-THOP02
[n] J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3785-3787. doi:10.18429/JACoW-IPAC2023-WEPM090
[n] Laugier I., Trofimov N.N., “Using CDEV as Middleware in Vacuum Equipment Controls”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P45, pp. XX-XX.
[n] T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
[n] J.-L. Biarrotte, M. Novati, P. Pierini, H. Safa, and D. Uriot, “Beam Dynamics Studies for the Fault Tolerance Assessment of the PDS-XADS Linac Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT057, pp. 1282-1284.
[n] P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
[n] P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
[n] E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
[n] T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4223-4224. doi:10.18429/JACoW-IPAC2016-THPOY051
[n] E. Panofski, A. Jankowiak, T. Kamps, G. Kourkafas, and S. Eisebitt, “Multi-Objective Optimization of an SRF Photoinjector for ERL and UED Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3704-3707. doi:10.18429/JACoW-IPAC2017-THPAB009
[n] D. J. Kelliher et al., “Longitudinal Tomography in a Scaling FFA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 719-722. doi:10.18429/JACoW-IPAC2019-MOPRB063
[n] H. Tanaka et al., “Top-up Operation at SPring-8 - Towards Maximizing the Potential of a 3rd Generation Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOACH03, pp. 222-224.
[n] F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431. doi:10.18429/JACoW-SRF2021-TUPCAV001
[n] R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
[n] K. Shinto, A. Takagi, S. Machida, M. Yoshii, Y. Mori, and K. Koba, “Longitudinal Emittance Control in High Intensity Proton Synchrotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D025, pp. 447-449.
[n] A. Citterio, M. Aiba, and R. Zennaro, “Long Range Wakefields in the SwissFEL C-band Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS076, pp. 781-783.
[n] O. V. Chubar et al., “Compensation of Variable Skew- and Normal quadrupole Focusing Effects of APPLE-II Undulators with Computer-aided Shimming”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC106, pp. 2246-2248.
[n] S. J. Smith et al., “Exploration of High-Gradient Structures for 4th Generation Light Sources”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1155-1157. doi:10.18429/JACoW-IPAC2019-MOPTS117
[n] A. Mak et al., “Overview of Undulator Concepts for Attosecond Single-Cycle Light”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2878-2881. doi:10.18429/JACoW-IPAC2018-THXGBD2
[n] W. Hartung et al., “Studies of Photo-Emission and Field Emission in an RF Photo-Injector with a High Quantum Efficiency Photo-Cathode”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH063, pp. 2239-2241.
[n] E. D. Hudson et al., “Magnet Model Studies for Separated-Sector Heavy-Ion Cyclotrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-15, pp. 197-200.
[n] D. Wu et al., “Beam Longitudinal Distribution Reconstructed by GESPAR Method at CAEP THz FEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2602-2604. doi:10.18429/JACoW-IPAC2019-WEPGW055
[n] R. W. Garnett et al., “Status of the LANSCE Front-End Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA14, pp. 327-329.
[n] N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
[n] J. Carwardine et al., “The ILC Control System Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZAC01, pp. 868-872.
[n] A. Hiraya et al., “Analysis for Magnetic and Radiation Spectral Properties of Undulators at HiSOR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA30, pp. 2689-2691.
[n] S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
[n] A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3837-3839. doi:10.18429/JACoW-IPAC2017-THPAB055
[n] I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
[n] C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
[n] J. Liu, R. J. Dejus, A. T. Donnelly, C. L. Doose, A. K. Jain, and M. S. Jaski, “Field Quality From Tolerance Analyses in Two-Half Sextuple Magnet”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 78-80. doi:10.18429/JACoW-MEDSI2018-TUPH23
[n] M. T. Lynch and J. Devenport, “Operational Results of the BEAR Flight RF System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1867-1870.
[n] W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
[n] M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
[n] R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
[n] C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
[n] C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
[n] L. H. Harwood, J. A. Nolen, S. Tanaka, and A. F. Zeller, “Analysis and Transport of Beams from the ECR Ion Source to the NSCL K500 and K800 Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-06, pp. 488-490.
[n] D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
[n] D. A. Swenson, E. A. Knapp, and G. R. Swain, “Some Preliminary Observations on a Family of Linac Modes”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 338-340.
[n] P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
[n] F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
[n] V. G. Dudnikov et al., “Improving Efficiency of Ions Production in Ion Source with Saddle Antenna”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM22, pp. 682-684.
[n] W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
[n] H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
[n] C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
[n] C. Benvenuti et al., “Structural and RF Properties of Niobium Films Deposited onto Annealed Niobium Resonators”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D28, pp. 1065-1073.
[n] L. Schachinger, R. Hinkins, V. Paxson, T. Sun, and R. Talman, “Modeling the SSC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1424-1427.
[n] F.-J. Decker, K. L. F. Bane, M. G. Minty, P. Raimondi, and R. L. Holtzapple, “Longitudinal Phase Space Setup for the SLC Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W028, pp. 509-511.
[n] K. Yonehara and V. Balbekov, “Investigation of Helical Cooling Channel”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC110, pp. 3233-3235.
[n] G. R. Swain, R. A. Jameson, E. A. Knapp, D. J. Liska, J. M. Potter, and J. D. Wallace, “Tuning and Pre-Beam Checkout of 805 MHz Side-Coupled Proton Linac Structures”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 614-619.
[n] J.-C. Chapuis, J. P. A. Arnoul, A. Hurst, and M. G. Manson, “The Laser M?®gaJoule Facility: Personnel Security and Safety Interlocks”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU009, pp. 1070-1072.
[n] R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
[n] G. Olry et al., “R&D On Spoke-type Cryomodule”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO007, pp. 2691-2693.
[n] W. Wittmer et al., “Synchrotron Light Options at Super-B”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP140, pp. 2384-2386.
[n] M. Hahn and I. Parat, “Re-commissioning of the ESRF Storage Ring Vacuum System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD010, pp. 2516-2518.
[n] F. Loehl, K. E. Hacker, and H. Schlarb, “A Sub-50 Femtosecond bunch arrival time monitor system for FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB15, pp. 262-264.
[n] W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
[n] S. Suzuki, “Update Plan of SPring-8 Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP44, pp. 438-440.
[n] A. Sauer et al., “End-to-End Simulations of a Superconducting Deuteron CH-DTL for IFMIF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG024, pp. 2942-2944.
[n] P. N. Lu, A. Arnold, P. Murcek, J. Teichert, H. Vennekate, and R. Xiang, “Beam Transport Optimization for Applying an SRF Gun at the ELBE Center”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3712-3715. doi:10.18429/JACoW-IPAC2017-THPAB012
[n] B. J. Patil, V. N. Bhoraskar, S. D. Dhole, S. T. Chavan, R. Krishnan, and S. N. Pethe, “Optimization of Dual Scattering Foil for 6 to 20 MeV Electron Beam Radiotherapy”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP010, pp. 2157-2159.
[n] J. R. Mulady, G. O. Hendry, C. G. Smith, J. L. Tom, and D. K. Wells, “Operation and Performance of a Compact, Isochronous Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 729-733.
[n] M. Uesaka et al., “Generation of Femtosecond Electron Single Pulse using Laser Photocathode RF Gun”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D026, pp. 737-739.
[n] J. Keintzel et al., “FCC-ee Optics Tuning – Towards the reference design”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1039, unpublished.
[n] I. Vilches Calvo, R. Barillere, and G. Thomas, “The Virtual UNICOS Process Expert: Integration of Artificial Intelligence Tools in Industrial Control Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP033, pp. 158-160.
[n] R. P. Johnson and C. Bowman, “Accelerators for Subcritical Molten Salt Reactors”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP034, pp. 2181-2183.
[n] C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
[n] M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4047-4049. doi:10.18429/JACoW-IPAC2016-THPOW046
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4383-4385. doi:10.18429/JACoW-IPAC2017-THPIK121
[n] F. Ciocci et al., “Spectroscopy of Muonic Hydrogen with a Compact FEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 864-867.
[n] A. Burns et al., “The BOSC Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 803-806.
[n] M. A. Green et al., “Insertion Device Commmissioning at SRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH009, pp. 2462-2464.
[n] M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4389-4391. doi:10.18429/JACoW-IPAC2017-THPIK123
[n] M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
[n] D. J. Dunning et al., “First Lasing of the ALICE IR-FEL at Daresbury Laboratory”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOOA2, pp. XX-XX.
[n] W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
[n] A. Blednykh et al., “Impedance of the Flange Joints With the RF Contact Spring in NSLS-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1597-1600. doi:10.18429/JACoW-IPAC2019-TUPGW082
[n] S. De Santis et al., “Beam Diagnostic Requirements for the Next Generation Light Source”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO15, pp. 242-244.
[n] A. N. Ermakov et al., “Linacs for Industry, Cargo Inspection and Medicine Designed by Moscow University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 130-132. doi:10.18429/JACoW-LINAC2018-MOPO060
[n] Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3769-3771. doi:10.18429/JACoW-IPAC2018-THPAL055
[n] S. Kwiatkowski, K. M. Baptiste, J. Julian, M. E. Kennedy, and J. Miszczak, “Final Layout and Test Results of the Disconnect Switch for ALS Storage Ring RF System Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO036, pp. 3421-3423.
[n] R. J. Macek and J. S. Kolski, “Understanding Beam Losses in High Intensity Proton Accumulator Rings”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3LR01, pp. 192-197.
[n] J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
[n] C. Zhang et al., “The higher order mode study of CSNS-II superconducting Linac”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 234-237. doi:10.18429/JACoW-SRF2025-MOP73
[n] R. Bonifacio, M. Ferrario, N. Piovella, G. R. M. Robb, A. Schiavi, and L. Serafini, “Quantum SASE FEL with a Laser Wiggler”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP016, pp. XX-XX.
[n] W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
[n] K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
[n] D. W. Reid, “High-Powered, Solid-State RF Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1701-1705.
[n] A. W. Grau, S. Casalbuoni, N. Glamann, and D. Saez de Jauregui, “Cryogenic, in-Vacuum Magnetic Measurement Setup for Superconducting Undulators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1709-1712. doi:10.18429/JACoW-IPAC2019-TUPRB015
[n] E. Klimenkov, G. Losev, Yu. Milichenko, and V. Voevodin, “BEAM PARAMETERS MEASUREMENT BASED ON TV METHODS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP30, pp. XX-XX.
[n] F. Armborst et al., “Vertical alignment of the SLS 2.0 storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2011, unpublished.
[n] G. P?Âplau, K. Floettmann, and U. van Rienen, “New 3D Space Charge Routines in the Tracking Code ASTRA”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP28, pp. 136-139.
[n] S. A. Nikitin, “Accelerator Aspects of the Precision Mass Measurement Experiments at the VEPP-4M Collider with the KEDR Detector”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHA01, pp. 11-13.
[n] H. Wang et al., “Magnetron R&D for High Efficiency CW RF Sources of Particle Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2233-2236. doi:10.18429/JACoW-IPAC2019-WEXXPLS1
[n] L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 387-390.
[n] L. Y. Yu, J. Chen, Y. B. Leng, K. R. Ye, and W. M. Zhou, “Design of the Beam Profile Monitors for the SXFEL Facility”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB81, pp. 534-536.
[n] N. Mueller et al., “The Frankfurt Funneling Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN018, pp. 1431-1433.
[n] K. Ko, Z. Li, and S. Tantawi, “Mode Launcher Design for the Multi-moded DLDS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP27F, pp. 1900-1902.
[n] E. I. Smirnova, B. E. Carlsten, L. M. Earley, and W. B. Haynes, “Design and Initial Testing of Omniguide Traveling-wave Tube Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS030, pp. 2403-2405.
[n] S. Jolly et al., “Detailed Study of the RF Properties of the FETS RFQ Cold Model”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP024, pp. 3422-3424.
[n] R. Bakker, D. Kraemer, B. Kuske, P. Kuske, and R. Mueller, “Establishment of a Model for Interpretation and Correction Tools for BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP48, pp. 2379-2381.
[n] S. Hartman, V. N. Litvinenko, I. Pinayev, G. Swift, and Y. Wu, “Control System Design and Upgrade Considerations for the Duke Free Electron Laser Laboratory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH009, pp. 785-787.
[n] R. Schultz and P. Hurh, “Lithium Collection Lens Filling Process for Fermilab Antiproton Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG012, pp. 1449-1451.
[n] V. L. Granatstein et al., “Operation of a 17.14 GHz Gyroklystron for Advanced Accelerators”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A19, pp. 2078-2080.
[n] C. M. Celata, M. A. Furman, D. P. Grote, and J.-L. Vay, “Particle-in-Cell Calculations of the Electron Cloud in the ILC Positron Damping Ring Wigglers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN108, pp. 1164-1166.
[n] S. Gammino and G. Ciavola, “ECR Ion Sources and Scaling Laws”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-03, pp. 377-380.
[n] L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
[n] D. Gudkov, V. Grishin, R. Veness, and C. Zamantzas, “Construction of a Mobile Irradiation Instrument for the Verification of the CERN LHC Beam Loss Monitoring System”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 450-453. doi:10.18429/JACoW-IBIC2017-WEPWC02
[n] M. Kedzie, J. D. Fuerst, S. M. Gerbick, M. P. Kelly, and K. W. Shepard, “A Top Loading 2 Kelvin Test Cryostat for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO030, pp. 622-624.
[n] T. Hirono et al., “Scaling Out of the MADOCA Database System for SACLA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC013, pp. 574-576.
[n] A. Faus-Golfe et al., “A Beam Position System for Hadrontherapy Facilities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC129, pp. 1323-1325.
[n] A. M. Tron, “Secondary Electron Monitors in Linacs for Intense Neutron Sources (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-88, pp. 917-919.
[n] C. Feng et al., “Design Studies for Cascaded HGHG and EESHG Experiments Based on SDUV-FEL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB14, pp. 291-294.
[n] V. Poncza and A. Lehrach, “Search for Electric Dipole Moments at Cosy in J??lich - Spin-Tracking Simulations Using Bmad”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 914-917. doi:10.18429/JACoW-IPAC2019-MOPTS028
[n] M. V. Hoover, “RF Power Sources”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper D-04, pp. 306-317.
[n] K. Abbas et al., “Design And Test Of An Accelerator Driven Neutron Activator At The Jrc Cyclotron Of The European Commission”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 228-230.
[n] D. C. Plostinar, M. Ikegami, Y. Liu, and T. Maruta, “Measurement of Resonant Space Charge Effects in the J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO087, pp. 3966-3968.
[n] S. Matsumoto et al., “Nextef: The 100MW X-band Test Facility in KEK”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP096, pp. 2740-2742.
[n] S. P. Virostek, M. D. Hoff, D. Li, J. W. Staples, and R. P. Wells, “Mechanical Design and Analysis of a 200 MHz, Bolt-together RFQ for the Accelerator Driven Neutron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN118, pp. 2313-2315.
[n] W. Br?ñutigam et al., “Commissioning of the Injector Complex of COSY-J??lich”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-12, pp. 67-70.
[n] M. Schedler, F. Frommberger, N. Heurich, W. Hillert, A. Roth, and R. Zimmermann, “First Measurements with Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP059, pp. 2840-2842.
[n] F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
[n] T. L. Larrieu, M. E. Joyce, and C. J. Slominski, “Design and Implementation of the CEBAF Element Database”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN029, pp. 157-159.
[n] D. Heins, J. Klute, R. D. Kohaupt, K. H. Matthiesen, S. Paetzold, and J. Ruemmler, “The Transverse Damping System with DSP PLL Tune Measurement for HERA p”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP022L, pp. 1857-1859.
[n] Y. M. Zhou, Y. B. Leng, N. Zhang, and H. J. Chen, “Bunch Phase Measurement for Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 341-344. doi:10.18429/JACoW-IPAC2017-MOPAB093
[n] H. T. Li, Z. G. He, Q. K. Jia, Q. Luo, L. Wang, and S. C. Zhang, “Status of FELiCHEM, a New IR-FEL in China”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 774-776. doi:10.18429/JACoW-IPAC2016-MOPOW026
[n] Y. Yuri, “Simulation Study on Transverse Laser Cooling and Ordering of Heavy-Ion Beams in a Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper FROAA4, pp. 1434-1436.
[n] A. A. Kolomiets, “30 Years Operation of 25 MeV Proton Linac I-2 in ITEP at Beam Current of 200-230 mA”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP84, pp. 542-546.
[n] U. Hartel et al., “Precise Verification of Phase and Amplitude Calibration by means of a Debunching Experiment in SIS18”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA004, pp. 3155-3157.
[n] L. Mether et al., “Electron Cloud Effects in the CERN Accelerators in Run 3”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 538-542. doi:10.18429/JACoW-HB2023-THBP31
[n] A.-S. M??ller and M. E. Angoletta, “A Multi-Turn Measurement System for the CERN PS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI090, pp. 1948-1950.
[n] H. Okamoto, “Frozen Beams”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAD001, pp. 4-8.
[n] C. Widmann et al., “First Tests of a Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 216-219. doi:10.18429/JACoW-IPAC2015-MOPWA045
[n] J. Corlett, “Future FEL's”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper FRA05, pp. 637-637.
[n] H. S. Xu, W.-H. Huang, and C.-X. Tang, “Nonlinear Effects in the TTX-LESR”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper THAMH3, pp. 99-101.
[n] X. Liu, “Particle Tracking Simulation With Space Charge Effects for an Induction Synchrotron and Preliminary Application to the Kek Digital Accelerator”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA21, pp. 89-91.
[n] C. Zamantzas, B. Dehning, C. F. Hajdu, and S. Jackson, “Reliability Tests of the LHC Beam Loss Monitoring FPGA Firmware”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM089, pp. 408-411.
[n] M. A. Bodendorfer, M. E. Angoletta, J. Axensalva, D. Manglunki, and S. Pasinelli, “Beam Loss in the Low Energy Ion Ring (LEIR) in the Light of the LHC Injector Upgrade for Ions (LIU-Ions)”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1C01, pp. 115-117.
[n] M. T. F. Pivi et al., “ESTB: A New Beam Test Facility at SLAC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ017, pp. 2808-2810.
[n] D. Bogert et al., “The Status of the Fermilab Main Injector Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP051G, pp. 404-406.
[n] D. Einfeld, A. Fabris, F. Perez, M. Svandrlik, and S. Voigt, “Layout of the ANKA RF System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP47G, pp. 1820-1822.
[n] M. V. Fazio, B. E. Carlsten, W. B. Haynes, and R. M. Stringfield, “A 500 MW Annular Beam Relativistic Klystron (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-26, pp. 424-426.
[n] C. Xiao, J. Tan, W. Fang, and Y. Xu, “The preliminary design and fabrication of LLRF system in proton CT”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG75, unpublished.
[n] I. Marneris et al., “Pulsing a 4.1 MW Motor Generator System to 34 MW Peak Power under Constant Input Power Operation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA163, pp. 3767-3769.
[n] R. Garoby et al., “Feasibilty Study of a 2 GEV Superconducting $H-$ Linac as Injector for the CERN PS”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4026, pp. 106-108.
[n] T. Yoshimoto et al., “Super-Bunch Induction Acceleration Scheme in the KEK Digital Accelerator”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA17, pp. 80-82.
[n] A. Yamashita and M. Kago, “A New Message-Based Data Acquisition System for Accelerator Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC130, pp. 413-416.
[n] A. Meseck, G. P?Âplau, and U. van Rienen, “Numerical Studies on the Influence of Fill Patterns on Ion Clouds”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEP02, pp. 146-148.
[n] K. E. Woods, S. Boucher, V. A. Bashkirov, R. W. Schulte, and B. M. Hegelich, “Diagnostic Proton Computed Tomography Using Laser-Driven Ion Acceleration”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCB1, pp. 770-772.
[n] A. Blas and G. Kotzian, “Upgraded Transverse Feedback for the CERN PS Booster”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 256-259. doi:10.18429/JACoW-HB2018-WEP2PO001
[n] L. Du, X. Guan, C.-X. Tang, and Q. Z. Xing, “Preliminary Beam Dynamics and Structure Design of One 50mA/CW RFQ with Ramped Inter-vane Voltage”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO049, pp. 3881-3883.
[n] Y. Higurashi, T. Nakagawa, J. Ohnishi, and K. Ozeki, “Emittance Measurements For RIKEN 28 GHz SC-ECRIS”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOOBMH02, pp. 10-14.
[n] W. Li, Z. H. Bai, D. R. Xu, and T. Zhang, “Study of the Intra-beam Scattering Effects in the HALS Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1501-1503. doi:10.18429/JACoW-IPAC2019-TUPGW042
[n] A. Rost, J. Adamczewski-Musch, T. Galatyuk, S. Linev, J. Pietraszko, and M. Traxler, “Beam Quality Monitoring System in the HADES Experiment at GSI Using CVD Diamond Material”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 300-302. doi:10.18429/JACoW-IBIC2018-TUPC03
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Mu et al., “The 648 MHz klystron power source system of CSNS-II Linac superconducting ellipsoid cavity”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 699-701.
- Z. Li and L. Xiao, “A Compact Alternative Crab Cavity Design at 400-MHz for the LHC Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP047, pp. 2104-2106.
- P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2301-2304.
- A. D. Palczewski, C. E. Reece, M. J. Kelley, and J. Tuggle, “Investigation of Nitrogen Absorption Rate and Nitride Growth on SRF Cavity Grade RRR Niobium as a Function of Furnace Temperature”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 744-747.
- J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM090, pp. 3785-3787.
- Laugier I., Trofimov N.N., “Using CDEV as Middleware in Vacuum Equipment Controls”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P45, pp. XX-XX.
- T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
- J.-L. Biarrotte, M. Novati, P. Pierini, H. Safa, and D. Uriot, “Beam Dynamics Studies for the Fault Tolerance Assessment of the PDS-XADS Linac Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT057, pp. 1282-1284.
- P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
- P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
- E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
- T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4223-4224.
- E. Panofski, A. Jankowiak, T. Kamps, G. Kourkafas, and S. Eisebitt, “Multi-Objective Optimization of an SRF Photoinjector for ERL and UED Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3704-3707.
- D. J. Kelliher et al., “Longitudinal Tomography in a Scaling FFA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 719-722.
- H. Tanaka et al., “Top-up Operation at SPring-8 - Towards Maximizing the Potential of a 3rd Generation Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOACH03, pp. 222-224.
- F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431.
- R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
- K. Shinto, A. Takagi, S. Machida, M. Yoshii, Y. Mori, and K. Koba, “Longitudinal Emittance Control in High Intensity Proton Synchrotrons”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D025, pp. 447-449.
- A. Citterio, M. Aiba, and R. Zennaro, “Long Range Wakefields in the SwissFEL C-band Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS076, pp. 781-783.
- O. V. Chubar et al., “Compensation of Variable Skew- and Normal quadrupole Focusing Effects of APPLE-II Undulators with Computer-aided Shimming”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC106, pp. 2246-2248.
- S. J. Smith et al., “Exploration of High-Gradient Structures for 4th Generation Light Sources”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1155-1157.
- A. Mak et al., “Overview of Undulator Concepts for Attosecond Single-Cycle Light”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2878-2881.
- W. Hartung et al., “Studies of Photo-Emission and Field Emission in an RF Photo-Injector with a High Quantum Efficiency Photo-Cathode”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH063, pp. 2239-2241.
- E. D. Hudson et al., “Magnet Model Studies for Separated-Sector Heavy-Ion Cyclotrons”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-15, pp. 197-200.
- D. Wu et al., “Beam Longitudinal Distribution Reconstructed by GESPAR Method at CAEP THz FEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2602-2604.
- R. W. Garnett et al., “Status of the LANSCE Front-End Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA14, pp. 327-329.
- N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
- J. Carwardine et al., “The ILC Control System Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZAC01, pp. 868-872.
- A. Hiraya et al., “Analysis for Magnetic and Radiation Spectral Properties of Undulators at HiSOR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA30, pp. 2689-2691.
- S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
- A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3837-3839.
- I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
- C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
- J. Liu, R. J. Dejus, A. T. Donnelly, C. L. Doose, A. K. Jain, and M. S. Jaski, “Field Quality From Tolerance Analyses in Two-Half Sextuple Magnet”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 78-80.
- M. T. Lynch and J. Devenport, “Operational Results of the BEAR Flight RF System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1867-1870.
- W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
- M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
- R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
- C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
- C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
- L. H. Harwood, J. A. Nolen, S. Tanaka, and A. F. Zeller, “Analysis and Transport of Beams from the ECR Ion Source to the NSCL K500 and K800 Cyclotrons”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-06, pp. 488-490.
- D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
- D. A. Swenson, E. A. Knapp, and G. R. Swain, “Some Preliminary Observations on a Family of Linac Modes”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 338-340.
- P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
- F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
- V. G. Dudnikov et al., “Improving Efficiency of Ions Production in Ion Source with Saddle Antenna”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM22, pp. 682-684.
- W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
- H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
- C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
- C. Benvenuti et al., “Structural and RF Properties of Niobium Films Deposited onto Annealed Niobium Resonators”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D28, pp. 1065-1073.
- L. Schachinger, R. Hinkins, V. Paxson, T. Sun, and R. Talman, “Modeling the SSC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1424-1427.
- F.-J. Decker, K. L. F. Bane, M. G. Minty, P. Raimondi, and R. L. Holtzapple, “Longitudinal Phase Space Setup for the SLC Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W028, pp. 509-511.
- K. Yonehara and V. Balbekov, “Investigation of Helical Cooling Channel”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC110, pp. 3233-3235.
- G. R. Swain, R. A. Jameson, E. A. Knapp, D. J. Liska, J. M. Potter, and J. D. Wallace, “Tuning and Pre-Beam Checkout of 805 MHz Side-Coupled Proton Linac Structures”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 614-619.
- J.-C. Chapuis, J. P. A. Arnoul, A. Hurst, and M. G. Manson, “The Laser M?®gaJoule Facility: Personnel Security and Safety Interlocks”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU009, pp. 1070-1072.
- R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
- G. Olry et al., “R&D On Spoke-type Cryomodule”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO007, pp. 2691-2693.
- W. Wittmer et al., “Synchrotron Light Options at Super-B”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP140, pp. 2384-2386.
- M. Hahn and I. Parat, “Re-commissioning of the ESRF Storage Ring Vacuum System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD010, pp. 2516-2518.
- F. Loehl, K. E. Hacker, and H. Schlarb, “A Sub-50 Femtosecond bunch arrival time monitor system for FLASH”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB15, pp. 262-264.
- W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
- S. Suzuki, “Update Plan of SPring-8 Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP44, pp. 438-440.
- A. Sauer et al., “End-to-End Simulations of a Superconducting Deuteron CH-DTL for IFMIF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG024, pp. 2942-2944.
- P. N. Lu, A. Arnold, P. Murcek, J. Teichert, H. Vennekate, and R. Xiang, “Beam Transport Optimization for Applying an SRF Gun at the ELBE Center”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3712-3715.
- B. J. Patil, V. N. Bhoraskar, S. D. Dhole, S. T. Chavan, R. Krishnan, and S. N. Pethe, “Optimization of Dual Scattering Foil for 6 to 20 MeV Electron Beam Radiotherapy”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP010, pp. 2157-2159.
- J. R. Mulady, G. O. Hendry, C. G. Smith, J. L. Tom, and D. K. Wells, “Operation and Performance of a Compact, Isochronous Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 729-733.
- M. Uesaka et al., “Generation of Femtosecond Electron Single Pulse using Laser Photocathode RF Gun”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D026, pp. 737-739.
- J. Keintzel et al., “FCC-ee Optics Tuning – Towards the reference design”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1039, this conference.
- I. Vilches Calvo, R. Barillere, and G. Thomas, “The Virtual UNICOS Process Expert: Integration of Artificial Intelligence Tools in Industrial Control Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP033, pp. 158-160.
- R. P. Johnson and C. Bowman, “Accelerators for Subcritical Molten Salt Reactors”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP034, pp. 2181-2183.
- C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
- M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4047-4049.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4383-4385.
- F. Ciocci et al., “Spectroscopy of Muonic Hydrogen with a Compact FEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 864-867.
- A. Burns et al., “The BOSC Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 803-806.
- M. A. Green et al., “Insertion Device Commmissioning at SRC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH009, pp. 2462-2464.
- M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4389-4391.
- M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
- D. J. Dunning et al., “First Lasing of the ALICE IR-FEL at Daresbury Laboratory”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOOA2, pp. XX-XX.
- W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
- A. Blednykh et al., “Impedance of the Flange Joints With the RF Contact Spring in NSLS-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1597-1600.
- S. De Santis et al., “Beam Diagnostic Requirements for the Next Generation Light Source”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO15, pp. 242-244.
- A. N. Ermakov et al., “Linacs for Industry, Cargo Inspection and Medicine Designed by Moscow University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 130-132.
- Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3769-3771.
- S. Kwiatkowski, K. M. Baptiste, J. Julian, M. E. Kennedy, and J. Miszczak, “Final Layout and Test Results of the Disconnect Switch for ALS Storage Ring RF System Power Supply”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO036, pp. 3421-3423.
- R. J. Macek and J. S. Kolski, “Understanding Beam Losses in High Intensity Proton Accumulator Rings”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO3LR01, pp. 192-197.
- J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
- C. Zhang et al., “The higher order mode study of CSNS-II superconducting Linac”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 234-237.
- R. Bonifacio, M. Ferrario, N. Piovella, G. R. M. Robb, A. Schiavi, and L. Serafini, “Quantum SASE FEL with a Laser Wiggler”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP016, pp. XX-XX.
- W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
- K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
- D. W. Reid, “High-Powered, Solid-State RF Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1701-1705.
- A. W. Grau, S. Casalbuoni, N. Glamann, and D. Saez de Jauregui, “Cryogenic, in-Vacuum Magnetic Measurement Setup for Superconducting Undulators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1709-1712.
- E. Klimenkov, G. Losev, Yu. Milichenko, and V. Voevodin, “BEAM PARAMETERS MEASUREMENT BASED ON TV METHODS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP30, pp. XX-XX.
- F. Armborst et al., “Vertical alignment of the SLS 2.0 storage ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2011, this conference.
- G. P?Âplau, K. Floettmann, and U. van Rienen, “New 3D Space Charge Routines in the Tracking Code ASTRA”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP28, pp. 136-139.
- S. A. Nikitin, “Accelerator Aspects of the Precision Mass Measurement Experiments at the VEPP-4M Collider with the KEDR Detector”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHA01, pp. 11-13.
- H. Wang et al., “Magnetron R&D for High Efficiency CW RF Sources of Particle Accelerators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2233-2236.
- L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 387-390.
- L. Y. Yu, J. Chen, Y. B. Leng, K. R. Ye, and W. M. Zhou, “Design of the Beam Profile Monitors for the SXFEL Facility”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB81, pp. 534-536.
- N. Mueller et al., “The Frankfurt Funneling Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN018, pp. 1431-1433.
- K. Ko, Z. Li, and S. Tantawi, “Mode Launcher Design for the Multi-moded DLDS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP27F, pp. 1900-1902.
- E. I. Smirnova, B. E. Carlsten, L. M. Earley, and W. B. Haynes, “Design and Initial Testing of Omniguide Traveling-wave Tube Structures”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS030, pp. 2403-2405.
- S. Jolly et al., “Detailed Study of the RF Properties of the FETS RFQ Cold Model”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP024, pp. 3422-3424.
- R. Bakker, D. Kraemer, B. Kuske, P. Kuske, and R. Mueller, “Establishment of a Model for Interpretation and Correction Tools for BESSY II”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP48, pp. 2379-2381.
- S. Hartman, V. N. Litvinenko, I. Pinayev, G. Swift, and Y. Wu, “Control System Design and Upgrade Considerations for the Duke Free Electron Laser Laboratory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH009, pp. 785-787.
- R. Schultz and P. Hurh, “Lithium Collection Lens Filling Process for Fermilab Antiproton Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG012, pp. 1449-1451.
- V. L. Granatstein et al., “Operation of a 17.14 GHz Gyroklystron for Advanced Accelerators”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A19, pp. 2078-2080.
- C. M. Celata, M. A. Furman, D. P. Grote, and J.-L. Vay, “Particle-in-Cell Calculations of the Electron Cloud in the ILC Positron Damping Ring Wigglers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN108, pp. 1164-1166.
- S. Gammino and G. Ciavola, “ECR Ion Sources and Scaling Laws”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-03, pp. 377-380.
- L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
- D. Gudkov, V. Grishin, R. Veness, and C. Zamantzas, “Construction of a Mobile Irradiation Instrument for the Verification of the CERN LHC Beam Loss Monitoring System”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 450-453.
- M. Kedzie, J. D. Fuerst, S. M. Gerbick, M. P. Kelly, and K. W. Shepard, “A Top Loading 2 Kelvin Test Cryostat for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO030, pp. 622-624.
- T. Hirono et al., “Scaling Out of the MADOCA Database System for SACLA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC013, pp. 574-576.
- A. Faus-Golfe et al., “A Beam Position System for Hadrontherapy Facilities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC129, pp. 1323-1325.
- A. M. Tron, “Secondary Electron Monitors in Linacs for Intense Neutron Sources (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-88, pp. 917-919.
- C. Feng et al., “Design Studies for Cascaded HGHG and EESHG Experiments Based on SDUV-FEL”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPB14, pp. 291-294.
- V. Poncza and A. Lehrach, “Search for Electric Dipole Moments at Cosy in J??lich - Spin-Tracking Simulations Using Bmad”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 914-917.
- M. V. Hoover, “RF Power Sources”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper D-04, pp. 306-317.
- K. Abbas et al., “Design And Test Of An Accelerator Driven Neutron Activator At The Jrc Cyclotron Of The European Commission”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 228-230.
- D. C. Plostinar, M. Ikegami, Y. Liu, and T. Maruta, “Measurement of Resonant Space Charge Effects in the J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO087, pp. 3966-3968.
- S. Matsumoto et al., “Nextef: The 100MW X-band Test Facility in KEK”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP096, pp. 2740-2742.
- S. P. Virostek, M. D. Hoff, D. Li, J. W. Staples, and R. P. Wells, “Mechanical Design and Analysis of a 200 MHz, Bolt-together RFQ for the Accelerator Driven Neutron Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN118, pp. 2313-2315.
- W. Br?ñutigam et al., “Commissioning of the Injector Complex of COSY-J??lich”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-12, pp. 67-70.
- M. Schedler, F. Frommberger, N. Heurich, W. Hillert, A. Roth, and R. Zimmermann, “First Measurements with Multibunch Feedback Systems at the Fast Ramping Stretcher Ring ELSA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP059, pp. 2840-2842.
- F. Krawczyk, J. Gioia, B. Haynes, R. Lujan, B. Rusnak, and B. Smith, “The Power Coupler Design for the APT Superconducting Accelerator”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C39, pp. 762-768.
- T. L. Larrieu, M. E. Joyce, and C. J. Slominski, “Design and Implementation of the CEBAF Element Database”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN029, pp. 157-159.
- D. Heins, J. Klute, R. D. Kohaupt, K. H. Matthiesen, S. Paetzold, and J. Ruemmler, “The Transverse Damping System with DSP PLL Tune Measurement for HERA p”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP022L, pp. 1857-1859.
- Y. M. Zhou, Y. B. Leng, N. Zhang, and H. J. Chen, “Bunch Phase Measurement for Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 341-344.
- H. T. Li, Z. G. He, Q. K. Jia, Q. Luo, L. Wang, and S. C. Zhang, “Status of FELiCHEM, a New IR-FEL in China”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 774-776.
- Y. Yuri, “Simulation Study on Transverse Laser Cooling and Ordering of Heavy-Ion Beams in a Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper FROAA4, pp. 1434-1436.
- A. A. Kolomiets, “30 Years Operation of 25 MeV Proton Linac I-2 in ITEP at Beam Current of 200-230 mA”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP84, pp. 542-546.
- U. Hartel et al., “Precise Verification of Phase and Amplitude Calibration by means of a Debunching Experiment in SIS18”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA004, pp. 3155-3157.
- L. Mether et al., “Electron Cloud Effects in the CERN Accelerators in Run 3”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP31, pp. 538-542.
- A.-S. M??ller and M. E. Angoletta, “A Multi-Turn Measurement System for the CERN PS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI090, pp. 1948-1950.
- H. Okamoto, “Frozen Beams”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAD001, pp. 4-8.
- C. Widmann et al., “First Tests of a Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 216-219.
- J. Corlett, “Future FEL's”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper FRA05, pp. 637-637.
- H. S. Xu, W.-H. Huang, and C.-X. Tang, “Nonlinear Effects in the TTX-LESR”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper THAMH3, pp. 99-101.
- X. Liu, “Particle Tracking Simulation With Space Charge Effects for an Induction Synchrotron and Preliminary Application to the Kek Digital Accelerator”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA21, pp. 89-91.
- C. Zamantzas, B. Dehning, C. F. Hajdu, and S. Jackson, “Reliability Tests of the LHC Beam Loss Monitoring FPGA Firmware”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM089, pp. 408-411.
- M. A. Bodendorfer, M. E. Angoletta, J. Axensalva, D. Manglunki, and S. Pasinelli, “Beam Loss in the Low Energy Ion Ring (LEIR) in the Light of the LHC Injector Upgrade for Ions (LIU-Ions)”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUM1C01, pp. 115-117.
- M. T. F. Pivi et al., “ESTB: A New Beam Test Facility at SLAC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ017, pp. 2808-2810.
- D. Bogert et al., “The Status of the Fermilab Main Injector Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP051G, pp. 404-406.
- D. Einfeld, A. Fabris, F. Perez, M. Svandrlik, and S. Voigt, “Layout of the ANKA RF System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP47G, pp. 1820-1822.
- M. V. Fazio, B. E. Carlsten, W. B. Haynes, and R. M. Stringfield, “A 500 MW Annular Beam Relativistic Klystron (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-26, pp. 424-426.
- C. Xiao, J. Tan, W. Fang, and Y. Xu, “The preliminary design and fabrication of LLRF system in proton CT”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG75, unpublished.
- I. Marneris et al., “Pulsing a 4.1 MW Motor Generator System to 34 MW Peak Power under Constant Input Power Operation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA163, pp. 3767-3769.
- R. Garoby et al., “Feasibilty Study of a 2 GEV Superconducting $H-$ Linac as Injector for the CERN PS”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4026, pp. 106-108.
- T. Yoshimoto et al., “Super-Bunch Induction Acceleration Scheme in the KEK Digital Accelerator”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA17, pp. 80-82.
- A. Yamashita and M. Kago, “A New Message-Based Data Acquisition System for Accelerator Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC130, pp. 413-416.
- A. Meseck, G. P?Âplau, and U. van Rienen, “Numerical Studies on the Influence of Fill Patterns on Ion Clouds”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEP02, pp. 146-148.
- K. E. Woods, S. Boucher, V. A. Bashkirov, R. W. Schulte, and B. M. Hegelich, “Diagnostic Proton Computed Tomography Using Laser-Driven Ion Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCB1, pp. 770-772.
- A. Blas and G. Kotzian, “Upgraded Transverse Feedback for the CERN PS Booster”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 256-259.
- L. Du, X. Guan, C.-X. Tang, and Q. Z. Xing, “Preliminary Beam Dynamics and Structure Design of One 50mA/CW RFQ with Ramped Inter-vane Voltage”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO049, pp. 3881-3883.
- Y. Higurashi, T. Nakagawa, J. Ohnishi, and K. Ozeki, “Emittance Measurements For RIKEN 28 GHz SC-ECRIS”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOOBMH02, pp. 10-14.
- W. Li, Z. H. Bai, D. R. Xu, and T. Zhang, “Study of the Intra-beam Scattering Effects in the HALS Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1501-1503.
- A. Rost, J. Adamczewski-Musch, T. Galatyuk, S. Linev, J. Pietraszko, and M. Traxler, “Beam Quality Monitoring System in the HADES Experiment at GSI Using CVD Diamond Material”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 300-302.
Back to search