Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Mu et al., “The 648 MHz klystron power source system of CSNS-II Linac superconducting ellipsoid cavity”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 699-701. doi:10.18429/JACoW-LINAC2024-THPB032
[n] Z. Li and L. Xiao, “A Compact Alternative Crab Cavity Design at 400-MHz for the LHC Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP047, pp. 2104-2106.
[n] P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2301-2304.
[n] A. D. Palczewski, C. E. Reece, M. J. Kelley, and J. Tuggle, “Investigation of Nitrogen Absorption Rate and Nitride Growth on SRF Cavity Grade RRR Niobium as a Function of Furnace Temperature”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 744-747. doi:10.18429/JACoW-LINAC2016-THOP02
[n] J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3785-3787. doi:10.18429/JACoW-IPAC2023-WEPM090
[n] Laugier I., Trofimov N.N., “Using CDEV as Middleware in Vacuum Equipment Controls”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P45, pp. XX-XX.
[n] T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
[n] J.-L. Biarrotte, M. Novati, P. Pierini, H. Safa, and D. Uriot, “Beam Dynamics Studies for the Fault Tolerance Assessment of the PDS-XADS Linac Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT057, pp. 1282-1284.
[n] P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
[n] P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
[n] E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
[n] T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4223-4224. doi:10.18429/JACoW-IPAC2016-THPOY051
[n] E. Panofski, A. Jankowiak, T. Kamps, G. Kourkafas, and S. Eisebitt, “Multi-Objective Optimization of an SRF Photoinjector for ERL and UED Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3704-3707. doi:10.18429/JACoW-IPAC2017-THPAB009
[n] D. J. Kelliher et al., “Longitudinal Tomography in a Scaling FFA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 719-722. doi:10.18429/JACoW-IPAC2019-MOPRB063
[n] H. Tanaka et al., “Top-up Operation at SPring-8 - Towards Maximizing the Potential of a 3rd Generation Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOACH03, pp. 222-224.
[n] F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431. doi:10.18429/JACoW-SRF2021-TUPCAV001
[n] R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
[n] K. Shinto, A. Takagi, S. Machida, M. Yoshii, Y. Mori, and K. Koba, “Longitudinal Emittance Control in High Intensity Proton Synchrotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D025, pp. 447-449.
[n] A. Citterio, M. Aiba, and R. Zennaro, “Long Range Wakefields in the SwissFEL C-band Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS076, pp. 781-783.
[n] O. V. Chubar et al., “Compensation of Variable Skew- and Normal quadrupole Focusing Effects of APPLE-II Undulators with Computer-aided Shimming”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC106, pp. 2246-2248.
[n] S. J. Smith et al., “Exploration of High-Gradient Structures for 4th Generation Light Sources”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1155-1157. doi:10.18429/JACoW-IPAC2019-MOPTS117
[n] A. Mak et al., “Overview of Undulator Concepts for Attosecond Single-Cycle Light”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2878-2881. doi:10.18429/JACoW-IPAC2018-THXGBD2
[n] W. Hartung et al., “Studies of Photo-Emission and Field Emission in an RF Photo-Injector with a High Quantum Efficiency Photo-Cathode”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH063, pp. 2239-2241.
[n] E. D. Hudson et al., “Magnet Model Studies for Separated-Sector Heavy-Ion Cyclotrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-15, pp. 197-200.
[n] D. Wu et al., “Beam Longitudinal Distribution Reconstructed by GESPAR Method at CAEP THz FEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2602-2604. doi:10.18429/JACoW-IPAC2019-WEPGW055
[n] R. W. Garnett et al., “Status of the LANSCE Front-End Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA14, pp. 327-329.
[n] N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
[n] J. Carwardine et al., “The ILC Control System Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZAC01, pp. 868-872.
[n] A. Hiraya et al., “Analysis for Magnetic and Radiation Spectral Properties of Undulators at HiSOR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA30, pp. 2689-2691.
[n] S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
[n] A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3837-3839. doi:10.18429/JACoW-IPAC2017-THPAB055
[n] I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
[n] C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
[n] J. Liu, R. J. Dejus, A. T. Donnelly, C. L. Doose, A. K. Jain, and M. S. Jaski, “Field Quality From Tolerance Analyses in Two-Half Sextuple Magnet”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 78-80. doi:10.18429/JACoW-MEDSI2018-TUPH23
[n] M. T. Lynch and J. Devenport, “Operational Results of the BEAR Flight RF System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1867-1870.
[n] W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
[n] M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
[n] R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
[n] C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
[n] C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
[n] L. H. Harwood, J. A. Nolen, S. Tanaka, and A. F. Zeller, “Analysis and Transport of Beams from the ECR Ion Source to the NSCL K500 and K800 Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-06, pp. 488-490.
[n] D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
[n] D. A. Swenson, E. A. Knapp, and G. R. Swain, “Some Preliminary Observations on a Family of Linac Modes”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 338-340.
[n] P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
[n] F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
[n] V. G. Dudnikov et al., “Improving Efficiency of Ions Production in Ion Source with Saddle Antenna”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM22, pp. 682-684.
[n] W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
[n] H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
[n] C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
[n] C. Benvenuti et al., “Structural and RF Properties of Niobium Films Deposited onto Annealed Niobium Resonators”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D28, pp. 1065-1073.
[n] L. Schachinger, R. Hinkins, V. Paxson, T. Sun, and R. Talman, “Modeling the SSC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1424-1427.
[n] F.-J. Decker, K. L. F. Bane, M. G. Minty, P. Raimondi, and R. L. Holtzapple, “Longitudinal Phase Space Setup for the SLC Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W028, pp. 509-511.
[n] K. Yonehara and V. Balbekov, “Investigation of Helical Cooling Channel”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC110, pp. 3233-3235.
[n] G. R. Swain, R. A. Jameson, E. A. Knapp, D. J. Liska, J. M. Potter, and J. D. Wallace, “Tuning and Pre-Beam Checkout of 805 MHz Side-Coupled Proton Linac Structures”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 614-619.
[n] J.-C. Chapuis, J. P. A. Arnoul, A. Hurst, and M. G. Manson, “The Laser M?®gaJoule Facility: Personnel Security and Safety Interlocks”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU009, pp. 1070-1072.
[n] R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
[n] G. Olry et al., “R&D On Spoke-type Cryomodule”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO007, pp. 2691-2693.
[n] W. Wittmer et al., “Synchrotron Light Options at Super-B”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP140, pp. 2384-2386.
[n] M. Hahn and I. Parat, “Re-commissioning of the ESRF Storage Ring Vacuum System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD010, pp. 2516-2518.
[n] F. Loehl, K. E. Hacker, and H. Schlarb, “A Sub-50 Femtosecond bunch arrival time monitor system for FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB15, pp. 262-264.
[n] W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
[n] S. Suzuki, “Update Plan of SPring-8 Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP44, pp. 438-440.
[n] A. Sauer et al., “End-to-End Simulations of a Superconducting Deuteron CH-DTL for IFMIF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG024, pp. 2942-2944.
[n] P. N. Lu, A. Arnold, P. Murcek, J. Teichert, H. Vennekate, and R. Xiang, “Beam Transport Optimization for Applying an SRF Gun at the ELBE Center”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3712-3715. doi:10.18429/JACoW-IPAC2017-THPAB012
[n] B. J. Patil, V. N. Bhoraskar, S. D. Dhole, S. T. Chavan, R. Krishnan, and S. N. Pethe, “Optimization of Dual Scattering Foil for 6 to 20 MeV Electron Beam Radiotherapy”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP010, pp. 2157-2159.
[n] J. R. Mulady, G. O. Hendry, C. G. Smith, J. L. Tom, and D. K. Wells, “Operation and Performance of a Compact, Isochronous Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 729-733.
[n] M. Uesaka et al., “Generation of Femtosecond Electron Single Pulse using Laser Photocathode RF Gun”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D026, pp. 737-739.
[n] J. Keintzel et al., “FCC-ee Optics Tuning – Towards the reference design”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1039, unpublished.
[n] I. Vilches Calvo, R. Barillere, and G. Thomas, “The Virtual UNICOS Process Expert: Integration of Artificial Intelligence Tools in Industrial Control Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP033, pp. 158-160.
[n] R. P. Johnson and C. Bowman, “Accelerators for Subcritical Molten Salt Reactors”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP034, pp. 2181-2183.
[n] C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
[n] M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4047-4049. doi:10.18429/JACoW-IPAC2016-THPOW046
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4383-4385. doi:10.18429/JACoW-IPAC2017-THPIK121
[n] F. Ciocci et al., “Spectroscopy of Muonic Hydrogen with a Compact FEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 864-867.
[n] A. Burns et al., “The BOSC Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 803-806.
[n] M. A. Green et al., “Insertion Device Commmissioning at SRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH009, pp. 2462-2464.
[n] M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4389-4391. doi:10.18429/JACoW-IPAC2017-THPIK123
[n] M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
[n] D. J. Dunning et al., “First Lasing of the ALICE IR-FEL at Daresbury Laboratory”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOOA2, pp. XX-XX.
[n] W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
[n] A. Blednykh et al., “Impedance of the Flange Joints With the RF Contact Spring in NSLS-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1597-1600. doi:10.18429/JACoW-IPAC2019-TUPGW082
[n] S. De Santis et al., “Beam Diagnostic Requirements for the Next Generation Light Source”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO15, pp. 242-244.
[n] A. N. Ermakov et al., “Linacs for Industry, Cargo Inspection and Medicine Designed by Moscow University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 130-132. doi:10.18429/JACoW-LINAC2018-MOPO060
[n] Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3769-3771. doi:10.18429/JACoW-IPAC2018-THPAL055
[n] S. Kwiatkowski, K. M. Baptiste, J. Julian, M. E. Kennedy, and J. Miszczak, “Final Layout and Test Results of the Disconnect Switch for ALS Storage Ring RF System Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO036, pp. 3421-3423.
[n] R. J. Macek and J. S. Kolski, “Understanding Beam Losses in High Intensity Proton Accumulator Rings”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3LR01, pp. 192-197.
[n] J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
[n] C. Zhang et al., “The higher order mode study of CSNS-II superconducting Linac”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 234-237. doi:10.18429/JACoW-SRF2025-MOP73
[n] R. Bonifacio, M. Ferrario, N. Piovella, G. R. M. Robb, A. Schiavi, and L. Serafini, “Quantum SASE FEL with a Laser Wiggler”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP016, pp. XX-XX.
[n] W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
[n] K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
[n] D. W. Reid, “High-Powered, Solid-State RF Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1701-1705.
[n] A. W. Grau, S. Casalbuoni, N. Glamann, and D. Saez de Jauregui, “Cryogenic, in-Vacuum Magnetic Measurement Setup for Superconducting Undulators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1709-1712. doi:10.18429/JACoW-IPAC2019-TUPRB015
[n] E. Klimenkov, G. Losev, Yu. Milichenko, and V. Voevodin, “BEAM PARAMETERS MEASUREMENT BASED ON TV METHODS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP30, pp. XX-XX.
[n] F. Armborst et al., “Vertical alignment of the SLS 2.0 storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2011, unpublished.
[n] G. P?Âplau, K. Floettmann, and U. van Rienen, “New 3D Space Charge Routines in the Tracking Code ASTRA”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP28, pp. 136-139.
[n] S. A. Nikitin, “Accelerator Aspects of the Precision Mass Measurement Experiments at the VEPP-4M Collider with the KEDR Detector”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHA01, pp. 11-13.
[n] H. Wang et al., “Magnetron R&D for High Efficiency CW RF Sources of Particle Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2233-2236. doi:10.18429/JACoW-IPAC2019-WEXXPLS1
[n] L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 387-390.
[n] L. Y. Yu, J. Chen, Y. B. Leng, K. R. Ye, and W. M. Zhou, “Design of the Beam Profile Monitors for the SXFEL Facility”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB81, pp. 534-536.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Mu et al., “The 648 MHz klystron power source system of CSNS-II Linac superconducting ellipsoid cavity”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 699-701.
- Z. Li and L. Xiao, “A Compact Alternative Crab Cavity Design at 400-MHz for the LHC Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP047, pp. 2104-2106.
- P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2301-2304.
- A. D. Palczewski, C. E. Reece, M. J. Kelley, and J. Tuggle, “Investigation of Nitrogen Absorption Rate and Nitride Growth on SRF Cavity Grade RRR Niobium as a Function of Furnace Temperature”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 744-747.
- J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM090, pp. 3785-3787.
- Laugier I., Trofimov N.N., “Using CDEV as Middleware in Vacuum Equipment Controls”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P45, pp. XX-XX.
- T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
- J.-L. Biarrotte, M. Novati, P. Pierini, H. Safa, and D. Uriot, “Beam Dynamics Studies for the Fault Tolerance Assessment of the PDS-XADS Linac Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT057, pp. 1282-1284.
- P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
- P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
- E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
- T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4223-4224.
- E. Panofski, A. Jankowiak, T. Kamps, G. Kourkafas, and S. Eisebitt, “Multi-Objective Optimization of an SRF Photoinjector for ERL and UED Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3704-3707.
- D. J. Kelliher et al., “Longitudinal Tomography in a Scaling FFA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 719-722.
- H. Tanaka et al., “Top-up Operation at SPring-8 - Towards Maximizing the Potential of a 3rd Generation Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOACH03, pp. 222-224.
- F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431.
- R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
- K. Shinto, A. Takagi, S. Machida, M. Yoshii, Y. Mori, and K. Koba, “Longitudinal Emittance Control in High Intensity Proton Synchrotrons”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D025, pp. 447-449.
- A. Citterio, M. Aiba, and R. Zennaro, “Long Range Wakefields in the SwissFEL C-band Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS076, pp. 781-783.
- O. V. Chubar et al., “Compensation of Variable Skew- and Normal quadrupole Focusing Effects of APPLE-II Undulators with Computer-aided Shimming”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC106, pp. 2246-2248.
- S. J. Smith et al., “Exploration of High-Gradient Structures for 4th Generation Light Sources”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1155-1157.
- A. Mak et al., “Overview of Undulator Concepts for Attosecond Single-Cycle Light”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2878-2881.
- W. Hartung et al., “Studies of Photo-Emission and Field Emission in an RF Photo-Injector with a High Quantum Efficiency Photo-Cathode”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH063, pp. 2239-2241.
- E. D. Hudson et al., “Magnet Model Studies for Separated-Sector Heavy-Ion Cyclotrons”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-15, pp. 197-200.
- D. Wu et al., “Beam Longitudinal Distribution Reconstructed by GESPAR Method at CAEP THz FEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2602-2604.
- R. W. Garnett et al., “Status of the LANSCE Front-End Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA14, pp. 327-329.
- N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
- J. Carwardine et al., “The ILC Control System Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZAC01, pp. 868-872.
- A. Hiraya et al., “Analysis for Magnetic and Radiation Spectral Properties of Undulators at HiSOR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA30, pp. 2689-2691.
- S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
- A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3837-3839.
- I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
- C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
- J. Liu, R. J. Dejus, A. T. Donnelly, C. L. Doose, A. K. Jain, and M. S. Jaski, “Field Quality From Tolerance Analyses in Two-Half Sextuple Magnet”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 78-80.
- M. T. Lynch and J. Devenport, “Operational Results of the BEAR Flight RF System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1867-1870.
- W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
- M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
- R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
- C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
- C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
- L. H. Harwood, J. A. Nolen, S. Tanaka, and A. F. Zeller, “Analysis and Transport of Beams from the ECR Ion Source to the NSCL K500 and K800 Cyclotrons”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-06, pp. 488-490.
- D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
- D. A. Swenson, E. A. Knapp, and G. R. Swain, “Some Preliminary Observations on a Family of Linac Modes”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 338-340.
- P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
- F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
- V. G. Dudnikov et al., “Improving Efficiency of Ions Production in Ion Source with Saddle Antenna”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM22, pp. 682-684.
- W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
- H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
- C. Adolphsen et al., “LIAR - A Computer Program for the Simulation and Modeling of High Performance Linacs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP27C, pp. 1156-1158.
- C. Benvenuti et al., “Structural and RF Properties of Niobium Films Deposited onto Annealed Niobium Resonators”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D28, pp. 1065-1073.
- L. Schachinger, R. Hinkins, V. Paxson, T. Sun, and R. Talman, “Modeling the SSC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1424-1427.
- F.-J. Decker, K. L. F. Bane, M. G. Minty, P. Raimondi, and R. L. Holtzapple, “Longitudinal Phase Space Setup for the SLC Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W028, pp. 509-511.
- K. Yonehara and V. Balbekov, “Investigation of Helical Cooling Channel”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC110, pp. 3233-3235.
- G. R. Swain, R. A. Jameson, E. A. Knapp, D. J. Liska, J. M. Potter, and J. D. Wallace, “Tuning and Pre-Beam Checkout of 805 MHz Side-Coupled Proton Linac Structures”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 614-619.
- J.-C. Chapuis, J. P. A. Arnoul, A. Hurst, and M. G. Manson, “The Laser M?®gaJoule Facility: Personnel Security and Safety Interlocks”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU009, pp. 1070-1072.
- R. R. Lindberg, K.-J. Kim, Y. Cai, Y. Ding, and Z. Huang, “Transverse Gradient Undulators for a Storage Ring X-ray FEL Oscillator”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THOBNO02, pp. 740-748.
- G. Olry et al., “R&D On Spoke-type Cryomodule”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO007, pp. 2691-2693.
- W. Wittmer et al., “Synchrotron Light Options at Super-B”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP140, pp. 2384-2386.
- M. Hahn and I. Parat, “Re-commissioning of the ESRF Storage Ring Vacuum System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD010, pp. 2516-2518.
- F. Loehl, K. E. Hacker, and H. Schlarb, “A Sub-50 Femtosecond bunch arrival time monitor system for FLASH”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB15, pp. 262-264.
- W. J. Ramler, “External Beam Focusing System - Argonne 60-Inch Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59F04, pp. 266-269.
- S. Suzuki, “Update Plan of SPring-8 Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP44, pp. 438-440.
- A. Sauer et al., “End-to-End Simulations of a Superconducting Deuteron CH-DTL for IFMIF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG024, pp. 2942-2944.
- P. N. Lu, A. Arnold, P. Murcek, J. Teichert, H. Vennekate, and R. Xiang, “Beam Transport Optimization for Applying an SRF Gun at the ELBE Center”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3712-3715.
- B. J. Patil, V. N. Bhoraskar, S. D. Dhole, S. T. Chavan, R. Krishnan, and S. N. Pethe, “Optimization of Dual Scattering Foil for 6 to 20 MeV Electron Beam Radiotherapy”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP010, pp. 2157-2159.
- J. R. Mulady, G. O. Hendry, C. G. Smith, J. L. Tom, and D. K. Wells, “Operation and Performance of a Compact, Isochronous Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 729-733.
- M. Uesaka et al., “Generation of Femtosecond Electron Single Pulse using Laser Photocathode RF Gun”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D026, pp. 737-739.
- J. Keintzel et al., “FCC-ee Optics Tuning – Towards the reference design”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1039, this conference.
- I. Vilches Calvo, R. Barillere, and G. Thomas, “The Virtual UNICOS Process Expert: Integration of Artificial Intelligence Tools in Industrial Control Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP033, pp. 158-160.
- R. P. Johnson and C. Bowman, “Accelerators for Subcritical Molten Salt Reactors”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP034, pp. 2181-2183.
- C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
- M. Ebbeni, H. Tarawneh, and A. Thiel, “Status of Insertion Device Measurement Systems at MAX IV Laboratory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4047-4049.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4383-4385.
- F. Ciocci et al., “Spectroscopy of Muonic Hydrogen with a Compact FEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 864-867.
- A. Burns et al., “The BOSC Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 803-806.
- M. A. Green et al., “Insertion Device Commmissioning at SRC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH009, pp. 2462-2464.
- M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4389-4391.
- M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
- D. J. Dunning et al., “First Lasing of the ALICE IR-FEL at Daresbury Laboratory”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOOA2, pp. XX-XX.
- W. Fawley, W. A. Barletta, J. Corlett, and A. Zholents, “Simulation Studies of an XUV/Soft X-Ray Harmonic-Cascade FEL for the Proposed LBNL Recirculating Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB048, pp. 923-925.
- A. Blednykh et al., “Impedance of the Flange Joints With the RF Contact Spring in NSLS-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1597-1600.
- S. De Santis et al., “Beam Diagnostic Requirements for the Next Generation Light Source”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO15, pp. 242-244.
- A. N. Ermakov et al., “Linacs for Industry, Cargo Inspection and Medicine Designed by Moscow University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 130-132.
- Y. S. Wong, K.-B. Liu, and J. F. Chen, “A Novel High Step-down DC-DC Converter with Isolated Transformer and Switched Capacitor Techniques for Corrector Magnet Bulk Power in Taiwan Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3769-3771.
- S. Kwiatkowski, K. M. Baptiste, J. Julian, M. E. Kennedy, and J. Miszczak, “Final Layout and Test Results of the Disconnect Switch for ALS Storage Ring RF System Power Supply”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO036, pp. 3421-3423.
- R. J. Macek and J. S. Kolski, “Understanding Beam Losses in High Intensity Proton Accumulator Rings”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO3LR01, pp. 192-197.
- J. H. Dieperink, A. Finnigan, W. Kalbreier, R. L. Keizer, M. Laffin, and V. Mertens, “Computerized Precision Control of a Synchronous High Voltage Discharge Switch for the Beam Separation System of the LEP eE - Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1981-1984.
- C. Zhang et al., “The higher order mode study of CSNS-II superconducting Linac”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 234-237.
- R. Bonifacio, M. Ferrario, N. Piovella, G. R. M. Robb, A. Schiavi, and L. Serafini, “Quantum SASE FEL with a Laser Wiggler”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP016, pp. XX-XX.
- W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
- K. A. Brown et al., “Commissioning Results of Slow Extraction of Heavy Ions from the AGS Booster”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE001, pp. 1542-1544.
- D. W. Reid, “High-Powered, Solid-State RF Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1701-1705.
- A. W. Grau, S. Casalbuoni, N. Glamann, and D. Saez de Jauregui, “Cryogenic, in-Vacuum Magnetic Measurement Setup for Superconducting Undulators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1709-1712.
- E. Klimenkov, G. Losev, Yu. Milichenko, and V. Voevodin, “BEAM PARAMETERS MEASUREMENT BASED ON TV METHODS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP30, pp. XX-XX.
- F. Armborst et al., “Vertical alignment of the SLS 2.0 storage ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2011, this conference.
- G. P?Âplau, K. Floettmann, and U. van Rienen, “New 3D Space Charge Routines in the Tracking Code ASTRA”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP28, pp. 136-139.
- S. A. Nikitin, “Accelerator Aspects of the Precision Mass Measurement Experiments at the VEPP-4M Collider with the KEDR Detector”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHA01, pp. 11-13.
- H. Wang et al., “Magnetron R&D for High Efficiency CW RF Sources of Particle Accelerators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2233-2236.
- L. Solomon, G. Decker, J. Galayda, and M. Kitamura, “Magnetic Measurements of Permanent Magnet Insertion Devices at the BNL-NSLS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 387-390.
- L. Y. Yu, J. Chen, Y. B. Leng, K. R. Ye, and W. M. Zhou, “Design of the Beam Profile Monitors for the SXFEL Facility”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB81, pp. 534-536.
Back to search