Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. Mu et al., “The 648 MHz klystron power source system of CSNS-II Linac superconducting ellipsoid cavity”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 699-701. doi:10.18429/JACoW-LINAC2024-THPB032
[n] Z. Li and L. Xiao, “A Compact Alternative Crab Cavity Design at 400-MHz for the LHC Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP047, pp. 2104-2106.
[n] P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2301-2304.
[n] A. D. Palczewski, C. E. Reece, M. J. Kelley, and J. Tuggle, “Investigation of Nitrogen Absorption Rate and Nitride Growth on SRF Cavity Grade RRR Niobium as a Function of Furnace Temperature”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 744-747. doi:10.18429/JACoW-LINAC2016-THOP02
[n] J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3785-3787. doi:10.18429/JACoW-IPAC2023-WEPM090
[n] Laugier I., Trofimov N.N., “Using CDEV as Middleware in Vacuum Equipment Controls”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P45, pp. XX-XX.
[n] T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
[n] J.-L. Biarrotte, M. Novati, P. Pierini, H. Safa, and D. Uriot, “Beam Dynamics Studies for the Fault Tolerance Assessment of the PDS-XADS Linac Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT057, pp. 1282-1284.
[n] P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
[n] P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
[n] E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
[n] T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4223-4224. doi:10.18429/JACoW-IPAC2016-THPOY051
[n] E. Panofski, A. Jankowiak, T. Kamps, G. Kourkafas, and S. Eisebitt, “Multi-Objective Optimization of an SRF Photoinjector for ERL and UED Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3704-3707. doi:10.18429/JACoW-IPAC2017-THPAB009
[n] D. J. Kelliher et al., “Longitudinal Tomography in a Scaling FFA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 719-722. doi:10.18429/JACoW-IPAC2019-MOPRB063
[n] H. Tanaka et al., “Top-up Operation at SPring-8 - Towards Maximizing the Potential of a 3rd Generation Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOACH03, pp. 222-224.
[n] F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431. doi:10.18429/JACoW-SRF2021-TUPCAV001
[n] R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
[n] K. Shinto, A. Takagi, S. Machida, M. Yoshii, Y. Mori, and K. Koba, “Longitudinal Emittance Control in High Intensity Proton Synchrotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D025, pp. 447-449.
[n] A. Citterio, M. Aiba, and R. Zennaro, “Long Range Wakefields in the SwissFEL C-band Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS076, pp. 781-783.
[n] O. V. Chubar et al., “Compensation of Variable Skew- and Normal quadrupole Focusing Effects of APPLE-II Undulators with Computer-aided Shimming”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC106, pp. 2246-2248.
[n] S. J. Smith et al., “Exploration of High-Gradient Structures for 4th Generation Light Sources”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1155-1157. doi:10.18429/JACoW-IPAC2019-MOPTS117
[n] A. Mak et al., “Overview of Undulator Concepts for Attosecond Single-Cycle Light”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2878-2881. doi:10.18429/JACoW-IPAC2018-THXGBD2
[n] W. Hartung et al., “Studies of Photo-Emission and Field Emission in an RF Photo-Injector with a High Quantum Efficiency Photo-Cathode”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH063, pp. 2239-2241.
[n] E. D. Hudson et al., “Magnet Model Studies for Separated-Sector Heavy-Ion Cyclotrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-15, pp. 197-200.
[n] D. Wu et al., “Beam Longitudinal Distribution Reconstructed by GESPAR Method at CAEP THz FEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2602-2604. doi:10.18429/JACoW-IPAC2019-WEPGW055
[n] R. W. Garnett et al., “Status of the LANSCE Front-End Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA14, pp. 327-329.
[n] N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
[n] J. Carwardine et al., “The ILC Control System Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZAC01, pp. 868-872.
[n] A. Hiraya et al., “Analysis for Magnetic and Radiation Spectral Properties of Undulators at HiSOR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA30, pp. 2689-2691.
[n] S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
[n] A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3837-3839. doi:10.18429/JACoW-IPAC2017-THPAB055
[n] I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
[n] C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
[n] J. Liu, R. J. Dejus, A. T. Donnelly, C. L. Doose, A. K. Jain, and M. S. Jaski, “Field Quality From Tolerance Analyses in Two-Half Sextuple Magnet”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 78-80. doi:10.18429/JACoW-MEDSI2018-TUPH23
[n] M. T. Lynch and J. Devenport, “Operational Results of the BEAR Flight RF System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1867-1870.
[n] W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
[n] M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
[n] R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
[n] C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
[n] C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
[n] L. H. Harwood, J. A. Nolen, S. Tanaka, and A. F. Zeller, “Analysis and Transport of Beams from the ECR Ion Source to the NSCL K500 and K800 Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-06, pp. 488-490.
[n] D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
[n] D. A. Swenson, E. A. Knapp, and G. R. Swain, “Some Preliminary Observations on a Family of Linac Modes”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 338-340.
[n] P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
[n] F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
[n] V. G. Dudnikov et al., “Improving Efficiency of Ions Production in Ion Source with Saddle Antenna”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM22, pp. 682-684.
[n] W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
[n] H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Mu et al., “The 648 MHz klystron power source system of CSNS-II Linac superconducting ellipsoid cavity”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 699-701.
- Z. Li and L. Xiao, “A Compact Alternative Crab Cavity Design at 400-MHz for the LHC Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP047, pp. 2104-2106.
- P. Gmaj, G. Bellomo, L. Calabretta, and D. Rifuggiato, “Final Mapping of the LNS Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2301-2304.
- A. D. Palczewski, C. E. Reece, M. J. Kelley, and J. Tuggle, “Investigation of Nitrogen Absorption Rate and Nitride Growth on SRF Cavity Grade RRR Niobium as a Function of Furnace Temperature”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 744-747.
- J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM090, pp. 3785-3787.
- Laugier I., Trofimov N.N., “Using CDEV as Middleware in Vacuum Equipment Controls”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P45, pp. XX-XX.
- T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
- J.-L. Biarrotte, M. Novati, P. Pierini, H. Safa, and D. Uriot, “Beam Dynamics Studies for the Fault Tolerance Assessment of the PDS-XADS Linac Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT057, pp. 1282-1284.
- P. Pierini, A. Bosotti, R. Paparella, D. Sertore, and E. Vogel, “Fabrication Experience of the Third Harmonic Superconducting Cavity Prototypes for the XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP033, pp. 2064-2066.
- P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
- E. Gallet et al., “Automatic Post-operational Checks for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP059, pp. 2653-2655.
- T. M. Cope, S. Allison, W. J. Corbett, and Y. H. Xu, “Upgrades to the SPEAR3 Single-Photon Bunch Measurement System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4223-4224.
- E. Panofski, A. Jankowiak, T. Kamps, G. Kourkafas, and S. Eisebitt, “Multi-Objective Optimization of an SRF Photoinjector for ERL and UED Applications”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3704-3707.
- D. J. Kelliher et al., “Longitudinal Tomography in a Scaling FFA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 719-722.
- H. Tanaka et al., “Top-up Operation at SPring-8 - Towards Maximizing the Potential of a 3rd Generation Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOACH03, pp. 222-224.
- F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431.
- R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
- K. Shinto, A. Takagi, S. Machida, M. Yoshii, Y. Mori, and K. Koba, “Longitudinal Emittance Control in High Intensity Proton Synchrotrons”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D025, pp. 447-449.
- A. Citterio, M. Aiba, and R. Zennaro, “Long Range Wakefields in the SwissFEL C-band Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS076, pp. 781-783.
- O. V. Chubar et al., “Compensation of Variable Skew- and Normal quadrupole Focusing Effects of APPLE-II Undulators with Computer-aided Shimming”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC106, pp. 2246-2248.
- S. J. Smith et al., “Exploration of High-Gradient Structures for 4th Generation Light Sources”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1155-1157.
- A. Mak et al., “Overview of Undulator Concepts for Attosecond Single-Cycle Light”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2878-2881.
- W. Hartung et al., “Studies of Photo-Emission and Field Emission in an RF Photo-Injector with a High Quantum Efficiency Photo-Cathode”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH063, pp. 2239-2241.
- E. D. Hudson et al., “Magnet Model Studies for Separated-Sector Heavy-Ion Cyclotrons”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-15, pp. 197-200.
- D. Wu et al., “Beam Longitudinal Distribution Reconstructed by GESPAR Method at CAEP THz FEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2602-2604.
- R. W. Garnett et al., “Status of the LANSCE Front-End Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA14, pp. 327-329.
- N. Mueller et al., “Funneling with a Two Beam RFQ-Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP063, pp. 4917-4919.
- J. Carwardine et al., “The ILC Control System Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZAC01, pp. 868-872.
- A. Hiraya et al., “Analysis for Magnetic and Radiation Spectral Properties of Undulators at HiSOR”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA30, pp. 2689-2691.
- S. Noguchi et al., “Development of 2-Cell SC Cavity System for ERL Injector Linac at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP071, pp. 987-989.
- A. T. Herrod, S. Jones, A. Wolski, I. R. Bailey, and M. Korostelev, “Modelling of Curvilinear Electrostatic Multipoles in the Fermilab Muon g-2 Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3837-3839.
- I. Nesmiyan and C. Peschke, “Cooling of Secondary Beams”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper WEBO05, pp. XX-XX.
- C. Arcambal et al., “Status of the Power Couplers for the ESS Elliptical Cavity Prototypes”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB078, pp. 1309-1312.
- J. Liu, R. J. Dejus, A. T. Donnelly, C. L. Doose, A. K. Jain, and M. S. Jaski, “Field Quality From Tolerance Analyses in Two-Half Sextuple Magnet”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 78-80.
- M. T. Lynch and J. Devenport, “Operational Results of the BEAR Flight RF System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1867-1870.
- W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517.
- M. H. Rashid and A. Chakrabarti, “Simulation of Sufficient Spindle Cusp Magnetic Field for 28 GHz ECRIS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT013, pp. 180-182.
- R. C. Vondrasek, J. Carr, R. C. Pardo, and R. Scott, “Initial Results of the ECR Charge Breeder for the 252Cf Fission Source Project (CARIBU) at ATLAS”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper WE-07, pp. 118-122.
- C. Biscari et al., “Proposal of an Experiment on Bunch Length Modulation in DAFNE”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAA003, pp. 336-338.
- C. S. Park and M. Hess, “Computational Requirements for Green's Function Based Photocathode Source Simulations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS012, pp. 3537-3539.
- L. H. Harwood, J. A. Nolen, S. Tanaka, and A. F. Zeller, “Analysis and Transport of Beams from the ECR Ion Source to the NSCL K500 and K800 Cyclotrons”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-06, pp. 488-490.
- D. P. McGinnis, M. Lindroos, and R. Miyamoto, “European Spallation Source Afterburner Concept”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO073, pp. 3924-3926.
- D. A. Swenson, E. A. Knapp, and G. R. Swain, “Some Preliminary Observations on a Family of Linac Modes”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 338-340.
- P. J. Bryant, P. Galbraith, J. P. Gourber, G. Guignard, and K. Takikawa, “Measurement of the Excitation of the Coupling Resonance Qh -Qv = O”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1440-1443.
- F. Loehl, “Linac Timing, Synchronization, and Active Stabilization”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOAN2, pp. 1381-1385.
- V. G. Dudnikov et al., “Improving Efficiency of Ions Production in Ion Source with Saddle Antenna”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM22, pp. 682-684.
- W. J. Brown, K. E. Kreischer, M. Pedrozzi, M. A. Shapiro, R. J. Temkin, and X. Wan, “A High Gradient 17 GHz RF Gun for the Production of High Brightness Electron Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOCR5, pp. 81-83.
- H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
Back to search