JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Maebara et al., “Low Power Test of RFQ Mock-up Modules at 175MHz for IFMIF Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB047, pp. 2829-2831. 
[n]	D. Davino, H. Hahn, and Y.-Y. Lee, “Measurements of the Coupling Impedance of the SNS Extraction Kickers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI036, pp. 1467-1469. 
[n]	H. Ludewig et al., “Integration of the Beam Scraper and Primary Collimator in the SNS Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG005, pp. 1428-1430. 
[n]	Z. Li, T. O. Raubenheimer, K. Bane, J. C. Sheppard, and R. H. Miller, “Parameter Optimization for the Low Frequency Linacs in the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA44, pp. 3486-3488. 
[n]	H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4557-4559. doi:10.18429/JACoW-IPAC2017-THPVA052
[n]	H. R. Yang et al., “Design of Compact C-Band Standing-Wave Accelerating Structure Enhancing RF Phase Focusing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC026, pp. 1221-1223. 
[n]	M. T. Heron et al., “Feed-forward and Feedback Schemes applied to the Diamond Light Source Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1757-1759. doi:10.18429/JACoW-IPAC2014-TUPRI081
[n]	D. Wisnivesky et al., “Upgrading of the LNLS Injection System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W031, pp. 1209-1211. 
[n]	L.-H. Yu et al., “Short Pulse Generation by Laser Slicing at NSLSII”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP136, pp. 2381-2383. 
[n]	S. Konjeti et al., “Mechanical Stability of Open-type Quadrupole Magnets for a 2.5 GeV SRS (Indus-2)”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA014, pp. 646-648. 
[n]	S. Huang, S. BenLiang, Y. R. Lu, and K. Zhu, “Simulation of Plasma Window for Gas Target of Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB010, pp. 3251-3253. 
[n]	F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n]	R. B. Palmer and R. C. Fernow, “Charge Separation for Muon Collider Cooling”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP001, pp. 103-105. 
[n]	C. Steier et al., “Design Progress of ALS-U, the Soft X-ray Diffraction Limited Upgrade of the Advanced Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1639-1642. doi:10.18429/JACoW-IPAC2019-TUPGW097
[n]	J. Ungrin et al., “Operating Experience with the IMPELA-10/50 Industrial Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH403, pp. 587-589. 
[n]	J. H. Wu and L.-H. Yu, “High Gain Harmonic Generation X-ray Free Electron Laser”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH107, pp. 2716-2718. 
[n]	P. Sp?ñdtke and R. Keller, “Pre-Acceleration of High-Current Ion Beams”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0013, pp. 121-123. 
[n]	A. Jackson, N. Marks, M. W. Poole, G. Saxon, V. P. Suller, and R. P. Walker, “Transverse Instabilities in the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2522-2525. 
[n]	L. S. Nadolski et al., “Orbit Stability Status and Improvement at SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC065, pp. 3134-3136. 
[n]	M. Niigaki et al., “Current Status of Development in TETD of High-power Vacuum Microwave Devices”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD015, pp. 475-477. 
[n]	G. Kruk et al., “How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors' Controls Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB05, pp. 43-46. 
[n]	C. H. Ho et al., “High Power Test Results of the First SRRC/ANL High Current L-Band RF Gun”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4055, pp. 520-522. 
[n]	M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400. 
[n]	K. A. Brown et al., “Multiple Single Bunch Extraction to the AGS Switchyard”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH130, pp. 1514-1516. 
[n]	F. Lin, Y. S. Derbenev, V. S. Morozov, Y. Zhang, and K. B. Beard, “Optimization of Chromaticity Compensation and Dynamic Aperture in MEIC Collider Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC099, pp. 1389-1391. 
[n]	C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584. 
[n]	S. Persichelli, M. Migliorati, M. M. Paoluzzi, and B. Salvant, “Impedance Studies for the PS Finemet?« Loaded Longitudinal Damper”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1708-1710. doi:10.18429/JACoW-IPAC2014-TUPRI060
[n]	M. Borland et al., “Survey of Commissioning of Recent Storage Ring Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2482-2484. doi:10.18429/JACoW-IPAC2015-WEBD2
[n]	M. Shimada et al., “Systematic Measurements of the Coherent THz Spectra by Magnetic Bunch Compression at the Compact ERL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1486-1488. doi:10.18429/JACoW-IPAC2019-TUPGW037
[n]	L. M. Bobb and G. Rehm, “Beam Size Measurement Using High Aspect Ratio LIGA Apertures in an X-Ray Pinhole Camera”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 445-447. doi:10.18429/JACoW-IPAC2017-MOPAB132
[n]	J. Tuggle, M. J. Kelley, A. D. Palczewski, C. E. Reece, and F. A. Stevie, “Investigation of Low-Level Nitrogen in Niobium by Secondary Ion Mass Spectrometry”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 196-198. doi:10.18429/JACoW-LINAC2016-MOPLR025
[n]	K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011. 
[n]	T. Biallas et al., “Experimental Results from an Injector for an IR FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP29F, pp. 1447-1449. 
[n]	H. Jaeckle, F. Jenni, and X. H. Ke, “Practical Experience with Self-optimizing, High Dynamic Control of Accelerator Magnet Power Supplies”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO011, pp. 3355-3357. 
[n]	M. G. Tiefenback, V. L. Bailey, and S. D. Putnam, “Electron Transport in Stellarator Fields”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 872-874. 
[n]	W. Kalbreier, G. Roy, and F. Ruggiero, “A Vertical Mid-arc Separation System for an 8ex8e-Bunch Operation of LEP2 with 90/circ/60/circ Phase Advance Optics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 448-451. 
[n]	T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129. 
[n]	J. T. Seeman and C. Adolphsen, “Beam Phase Space Determination at 50 GeV in the SLC Linac”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 275-279. 
[n]	P. Bauer et al., “Advances in the Understanding and Operations of Superconducting Colliders”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA001, pp. 54-58. 
[n]	A. Bortniansky et al., “Analytical Complexes for Ion Beam Analysis and Modification of Materials in St. Petersburg and Bratislava”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP033G, pp. 2696-2698. 
[n]	T. Plomion et al., “Preliminary Design of the IFMIF-DONES Superconducting Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 311-314. doi:10.18429/JACoW-SRF2019-MOP097
[n]	H. Zen, K. Tanaka, Y. Zhao, and H. Ohgaki, “Commissioning of new photocathode RF gun for oscillator-type mid-infrared free-electron laser at Kyoto University”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL046, unpublished. 
[n]	D. Gonnella et al., “Nitrogen-Doped 9-Cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP018, pp. 88-91. 
[n]	C.-Y. Liu, Y.-C. Chien, and H. M. Shih, “Performance Evaluation of the Switching Mode AC Power Supply”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP125, pp. 3652-3654. 
[n]	C. H. Joshi, T. Grimm, A. Mavanur, and C.-Y. Tai, “Magnetostrictive Tuners for SRF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB089, pp. 1407-1409. 
[n]	D. J. Summers, L. M. Cremaldi, R. Godang, B. R. Kipapa, R. B. Palmer, and H. E. Rice, “Muon Acceleration to 750 GeV in the Tevatron Tunnel for a 1.5 TeV mu+ mu- Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS082, pp. 3178-3180. 
[n]	K. L. Mahoney, I. T. Carlino, K. Kindrew, T. L. Larrieu, T. S. McGuckin, and N. Okay, “Jefferson Lab Personnel Safety Electronic Log RMA”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP046, pp. 188-190. 
[n]	R. De Maria, S. D. Fartoukh, and M. Fitterer, “HLLHCV1.1 Optics Version for the HL-LHC Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2090-2093. doi:10.18429/JACoW-IPAC2015-TUPTY037
[n]	B. Jones et al., “Injection and Stripping Foil Studies for a 180 MeV Injection Upgrade at ISIS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C01, pp. 456-460. 
[n]	J. S. Kim, R. H. Miller, C. D. Nantista, S. G. Tantawi, D. H. Whittum, and A. W. Weidemann, “A Resonant Cavity for Single-Shot Emittance Measurement”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH053, pp. 1345-1347. 
[n]	A. A. Gorzawski et al., “The AccTesting Framework: An Extensible Framework for Accelerator Commissioning and Systematic Testing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC078, pp. 1250-1253. 
[n]	M. Incurvati et al., “Fast High-Power Power Supply for Scanning Magnets of CNAO Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP122, pp. 3643-3645. 
[n]	M. Re et al., “Production of Inorganic Thin Scintillating Films for Ion Beam Monitoring Devices”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT002, pp. 808-810. 
[n]	V. Grishin and S. Likhachev, “High Efficiency Circuital Scheme of Hard Radiation on Base of Compact Electron Accelerators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH041, pp. 2539-2541. 
[n]	M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502. 
[n]	M. Tomizawa, A. Y. Molodozhentsev, E. Nakamura, I. Sakai, and M. Uota, “New Beam Optics Design of Injection/Fast Extraction/Abort Lines of J-PARC Main Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN052, pp. 1508-1510. 
[n]	K. Sasa et al., “Accelerator Mass Spectrometry at the Tsukuba 12 MV Pelletron Tandem Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA064, pp. 223-225. 
[n]	Y.-C. Chae and R. Soliday, “Development of SDDS-Compliant GENESIS and Its Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH104, pp. 2710-2712. 
[n]	J. P. Duris, R. K. Li, P. Musumeci, and E. W. Threlkeld, “High Capture Low Energy Spread Inverse Free Electron Laser Accelerator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA16, pp. 619-621. 
[n]	S. R. Lawrie et al., “Modifications to the Analysing Magnet in the ISIS Penning Ion Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC150, pp. 427-429. 
[n]	A. Romanenko, L. D. Cooley, G. Wu, and G. Ciovati, “Post-Baking Losses in Niobium Cavities Studied by Dissection”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO008, pp. 710-713. 
[n]	J. Petter, J. Marriner, D. McGinnis, and J. Misek, “New 4-8 GHz Core Cooling Pickups and Kickers for the Fermilab Accumulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 648-651. 
[n]	G. Arnolds-Mayer, K. Jaeger, and R. Mayer, “Industrial Production of 8 Superconducting Accelerator Modules for HERA and 6 Superconducting Accelerating Cavities for DALINAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1070-1073. 
[n]	R. M. Bodenstein and M. G. Tiefenback, “Multipass Steering Protocols at Jefferson Lab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS072, pp. 3648-3650. 
[n]	J. Feikes et al., “Recent Developments at the Metrology Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC010, pp. 2927-2929. 
[n]	P. A. McIntosh et al., “Commissioning of the ERLP SRF Systems at Daresbury Laboratory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP141, pp. 889-891. 
[n]	J. H. Dieperink, J.-L. Bretin, E. Carlier, L. Ducimeti, G. H. Schr, and E. Vossenberg, “Design Aspects Related to the Reliability of the LHC Beam Dump Kicker Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P007, pp. 225-227. 
[n]	A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196. 
[n]	S. Aderhold, C. Adolphsen, A. Burrill, D. Gonnella, and J. Nelson, “RF Incoming Inspection of 1.3 GHz Cryomodules for LCLS-II at SLAC National Accelerator Laboratory”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1014-1017. doi:10.18429/JACoW-SRF2019-THP059
[n]	H. C. Fernandes et al., “Ultra-high Vacuum Seal for Long Chambers using Wire Seals”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC09, pp. 1157-1159. 
[n]	D. R. Struthers, “Automatic Control of the Trim-Coil Power Supplies at the Berkeley 88-Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-008, pp. XX-XX. 
[n]	B. Sinha and R. K. Bhandari, “Status of the Superconducting Cyclotron Project at VECC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM201, pp. XX-XX. 
[n]	T. Persson and P. K. Skowronski, “Beam Stability at CTF3”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR032, pp. 1888-1890. 
[n]	G. Eremeev, H. Padamsee, M. Liepe, and R. Roy, “Effect of Mild Baking on High Field Q-Drop of BCP Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP18, pp. 70-73. 
[n]	A. V. Velez, A. Frahm, J. Knobloch, and A. Neumann, “Cold Bead-Pull Test Stand for SRF Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 748-750. doi:10.18429/JACoW-LINAC2016-THOP03
[n]	S. Verdu-Andres, I. Ben-Zvi, D. Holmes, and Q. Wu, “Power Requirement and Preliminary Coupler Design for the eRHIC Crab Cavity System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2394-2397. doi:10.18429/JACoW-IPAC2018-WEPMF012
[n]	P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3174-3176. doi:10.18429/JACoW-IPAC2014-THPRO121
[n]	P. Balleyguier and F. Launay, “A MAFIA to I-DEAS Link for Thermal Studies in the IPHI RFQ”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO004, pp. 2121-2123. 
[n]	F. Wang, “Design and Optimization of Future X-ray FELs based on Advanced High Frequency Linacs”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS1, pp. 1491-1495. 
[n]	L. Ondris et al., “Nuclotron Extracted Beams Space Parameters Measuring System for Low Intensity Levels.”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI022, pp. 1957-1959. 
[n]	V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629. 
[n]	P. Muggli et al., “Multi-bunch Plasma Wakefield Experiments at the Brookhaven National Laboratory Accelerator Test Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS025, pp. 0-3645. 
[n]	J. Bailey, “Internal Current Measurement Errors in High Energy Proton Cyclotrons - Simulation, Correction, Design and Measurement”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-16, pp. XX-XX. 
[n]	O. Capatina, K. Artoos, N. Bourcey, O. Calvet, and C. Hauviller, “Mechanical Dynamic Analysis of the LHC Arc Cryo-Magnets”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG007, pp. 1434-1436. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search