Favourites
For Word
[n] S. Maebara et al., “Low Power Test of RFQ Mock-up Modules at 175MHz for IFMIF Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB047, pp. 2829-2831.
[n] D. Davino, H. Hahn, and Y.-Y. Lee, “Measurements of the Coupling Impedance of the SNS Extraction Kickers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI036, pp. 1467-1469.
[n] H. Ludewig et al., “Integration of the Beam Scraper and Primary Collimator in the SNS Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG005, pp. 1428-1430.
[n] Z. Li, T. O. Raubenheimer, K. Bane, J. C. Sheppard, and R. H. Miller, “Parameter Optimization for the Low Frequency Linacs in the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA44, pp. 3486-3488.
[n] H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4557-4559. doi:10.18429/JACoW-IPAC2017-THPVA052
[n] H. R. Yang et al., “Design of Compact C-Band Standing-Wave Accelerating Structure Enhancing RF Phase Focusing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC026, pp. 1221-1223.
[n] M. T. Heron et al., “Feed-forward and Feedback Schemes applied to the Diamond Light Source Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1757-1759. doi:10.18429/JACoW-IPAC2014-TUPRI081
[n] D. Wisnivesky et al., “Upgrading of the LNLS Injection System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W031, pp. 1209-1211.
[n] L.-H. Yu et al., “Short Pulse Generation by Laser Slicing at NSLSII”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP136, pp. 2381-2383.
[n] S. Konjeti et al., “Mechanical Stability of Open-type Quadrupole Magnets for a 2.5 GeV SRS (Indus-2)”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA014, pp. 646-648.
[n] S. Huang, S. BenLiang, Y. R. Lu, and K. Zhu, “Simulation of Plasma Window for Gas Target of Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB010, pp. 3251-3253.
[n] F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n] R. B. Palmer and R. C. Fernow, “Charge Separation for Muon Collider Cooling”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP001, pp. 103-105.
[n] C. Steier et al., “Design Progress of ALS-U, the Soft X-ray Diffraction Limited Upgrade of the Advanced Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1639-1642. doi:10.18429/JACoW-IPAC2019-TUPGW097
[n] J. Ungrin et al., “Operating Experience with the IMPELA-10/50 Industrial Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH403, pp. 587-589.
[n] J. H. Wu and L.-H. Yu, “High Gain Harmonic Generation X-ray Free Electron Laser”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH107, pp. 2716-2718.
[n] P. Sp?ñdtke and R. Keller, “Pre-Acceleration of High-Current Ion Beams”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0013, pp. 121-123.
[n] A. Jackson, N. Marks, M. W. Poole, G. Saxon, V. P. Suller, and R. P. Walker, “Transverse Instabilities in the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2522-2525.
[n] L. S. Nadolski et al., “Orbit Stability Status and Improvement at SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC065, pp. 3134-3136.
[n] M. Niigaki et al., “Current Status of Development in TETD of High-power Vacuum Microwave Devices”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD015, pp. 475-477.
[n] G. Kruk et al., “How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors' Controls Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB05, pp. 43-46.
[n] C. H. Ho et al., “High Power Test Results of the First SRRC/ANL High Current L-Band RF Gun”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4055, pp. 520-522.
[n] M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400.
[n] K. A. Brown et al., “Multiple Single Bunch Extraction to the AGS Switchyard”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH130, pp. 1514-1516.
[n] F. Lin, Y. S. Derbenev, V. S. Morozov, Y. Zhang, and K. B. Beard, “Optimization of Chromaticity Compensation and Dynamic Aperture in MEIC Collider Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC099, pp. 1389-1391.
[n] C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
[n] S. Persichelli, M. Migliorati, M. M. Paoluzzi, and B. Salvant, “Impedance Studies for the PS Finemet?« Loaded Longitudinal Damper”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1708-1710. doi:10.18429/JACoW-IPAC2014-TUPRI060
[n] M. Borland et al., “Survey of Commissioning of Recent Storage Ring Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2482-2484. doi:10.18429/JACoW-IPAC2015-WEBD2
[n] M. Shimada et al., “Systematic Measurements of the Coherent THz Spectra by Magnetic Bunch Compression at the Compact ERL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1486-1488. doi:10.18429/JACoW-IPAC2019-TUPGW037
[n] L. M. Bobb and G. Rehm, “Beam Size Measurement Using High Aspect Ratio LIGA Apertures in an X-Ray Pinhole Camera”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 445-447. doi:10.18429/JACoW-IPAC2017-MOPAB132
[n] J. Tuggle, M. J. Kelley, A. D. Palczewski, C. E. Reece, and F. A. Stevie, “Investigation of Low-Level Nitrogen in Niobium by Secondary Ion Mass Spectrometry”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 196-198. doi:10.18429/JACoW-LINAC2016-MOPLR025
[n] K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011.
[n] T. Biallas et al., “Experimental Results from an Injector for an IR FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP29F, pp. 1447-1449.
[n] H. Jaeckle, F. Jenni, and X. H. Ke, “Practical Experience with Self-optimizing, High Dynamic Control of Accelerator Magnet Power Supplies”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO011, pp. 3355-3357.
[n] M. G. Tiefenback, V. L. Bailey, and S. D. Putnam, “Electron Transport in Stellarator Fields”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 872-874.
[n] W. Kalbreier, G. Roy, and F. Ruggiero, “A Vertical Mid-arc Separation System for an 8ex8e-Bunch Operation of LEP2 with 90/circ/60/circ Phase Advance Optics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 448-451.
[n] T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Maebara et al., “Low Power Test of RFQ Mock-up Modules at 175MHz for IFMIF Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB047, pp. 2829-2831.
- D. Davino, H. Hahn, and Y.-Y. Lee, “Measurements of the Coupling Impedance of the SNS Extraction Kickers”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI036, pp. 1467-1469.
- H. Ludewig et al., “Integration of the Beam Scraper and Primary Collimator in the SNS Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG005, pp. 1428-1430.
- Z. Li, T. O. Raubenheimer, K. Bane, J. C. Sheppard, and R. H. Miller, “Parameter Optimization for the Low Frequency Linacs in the NLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA44, pp. 3486-3488.
- H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4557-4559.
- H. R. Yang et al., “Design of Compact C-Band Standing-Wave Accelerating Structure Enhancing RF Phase Focusing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC026, pp. 1221-1223.
- M. T. Heron et al., “Feed-forward and Feedback Schemes applied to the Diamond Light Source Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1757-1759.
- D. Wisnivesky et al., “Upgrading of the LNLS Injection System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W031, pp. 1209-1211.
- L.-H. Yu et al., “Short Pulse Generation by Laser Slicing at NSLSII”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP136, pp. 2381-2383.
- S. Konjeti et al., “Mechanical Stability of Open-type Quadrupole Magnets for a 2.5 GeV SRS (Indus-2)”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA014, pp. 646-648.
- S. Huang, S. BenLiang, Y. R. Lu, and K. Zhu, “Simulation of Plasma Window for Gas Target of Neutron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB010, pp. 3251-3253.
- F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL169, pp. 2143-2146.
- R. B. Palmer and R. C. Fernow, “Charge Separation for Muon Collider Cooling”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP001, pp. 103-105.
- C. Steier et al., “Design Progress of ALS-U, the Soft X-ray Diffraction Limited Upgrade of the Advanced Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1639-1642.
- J. Ungrin et al., “Operating Experience with the IMPELA-10/50 Industrial Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH403, pp. 587-589.
- J. H. Wu and L.-H. Yu, “High Gain Harmonic Generation X-ray Free Electron Laser”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH107, pp. 2716-2718.
- P. Sp?ñdtke and R. Keller, “Pre-Acceleration of High-Current Ion Beams”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0013, pp. 121-123.
- A. Jackson, N. Marks, M. W. Poole, G. Saxon, V. P. Suller, and R. P. Walker, “Transverse Instabilities in the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2522-2525.
- L. S. Nadolski et al., “Orbit Stability Status and Improvement at SOLEIL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC065, pp. 3134-3136.
- M. Niigaki et al., “Current Status of Development in TETD of High-power Vacuum Microwave Devices”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD015, pp. 475-477.
- G. Kruk et al., “How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors' Controls Software”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOBAB05, pp. 43-46.
- C. H. Ho et al., “High Power Test Results of the First SRRC/ANL High Current L-Band RF Gun”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4055, pp. 520-522.
- M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400.
- K. A. Brown et al., “Multiple Single Bunch Extraction to the AGS Switchyard”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH130, pp. 1514-1516.
- F. Lin, Y. S. Derbenev, V. S. Morozov, Y. Zhang, and K. B. Beard, “Optimization of Chromaticity Compensation and Dynamic Aperture in MEIC Collider Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC099, pp. 1389-1391.
- C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584.
- S. Persichelli, M. Migliorati, M. M. Paoluzzi, and B. Salvant, “Impedance Studies for the PS Finemet?« Loaded Longitudinal Damper”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1708-1710.
- M. Borland et al., “Survey of Commissioning of Recent Storage Ring Light Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2482-2484.
- M. Shimada et al., “Systematic Measurements of the Coherent THz Spectra by Magnetic Bunch Compression at the Compact ERL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1486-1488.
- L. M. Bobb and G. Rehm, “Beam Size Measurement Using High Aspect Ratio LIGA Apertures in an X-Ray Pinhole Camera”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 445-447.
- J. Tuggle, M. J. Kelley, A. D. Palczewski, C. E. Reece, and F. A. Stevie, “Investigation of Low-Level Nitrogen in Niobium by Secondary Ion Mass Spectrometry”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 196-198.
- K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011.
- T. Biallas et al., “Experimental Results from an Injector for an IR FEL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP29F, pp. 1447-1449.
- H. Jaeckle, F. Jenni, and X. H. Ke, “Practical Experience with Self-optimizing, High Dynamic Control of Accelerator Magnet Power Supplies”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO011, pp. 3355-3357.
- M. G. Tiefenback, V. L. Bailey, and S. D. Putnam, “Electron Transport in Stellarator Fields”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 872-874.
- W. Kalbreier, G. Roy, and F. Ruggiero, “A Vertical Mid-arc Separation System for an 8ex8e-Bunch Operation of LEP2 with 90/circ/60/circ Phase Advance Optics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 448-451.
- T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129.
Back to search