JaCoW Logo

Reference Search

Favourites


For Word

[n]	S. Maebara et al., “Low Power Test of RFQ Mock-up Modules at 175MHz for IFMIF Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB047, pp. 2829-2831. 
[n]	D. Davino, H. Hahn, and Y.-Y. Lee, “Measurements of the Coupling Impedance of the SNS Extraction Kickers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI036, pp. 1467-1469. 
[n]	H. Ludewig et al., “Integration of the Beam Scraper and Primary Collimator in the SNS Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG005, pp. 1428-1430. 
[n]	Z. Li, T. O. Raubenheimer, K. Bane, J. C. Sheppard, and R. H. Miller, “Parameter Optimization for the Low Frequency Linacs in the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA44, pp. 3486-3488. 
[n]	H. Wang, H. Qu, J. L. Wang, Z. Wang, and N. Zhou, “Preliminary Design of Magnet Support System for CEPC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4557-4559. doi:10.18429/JACoW-IPAC2017-THPVA052
[n]	H. R. Yang et al., “Design of Compact C-Band Standing-Wave Accelerating Structure Enhancing RF Phase Focusing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC026, pp. 1221-1223. 
[n]	M. T. Heron et al., “Feed-forward and Feedback Schemes applied to the Diamond Light Source Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1757-1759. doi:10.18429/JACoW-IPAC2014-TUPRI081
[n]	D. Wisnivesky et al., “Upgrading of the LNLS Injection System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W031, pp. 1209-1211. 
[n]	L.-H. Yu et al., “Short Pulse Generation by Laser Slicing at NSLSII”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP136, pp. 2381-2383. 
[n]	S. Konjeti et al., “Mechanical Stability of Open-type Quadrupole Magnets for a 2.5 GeV SRS (Indus-2)”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA014, pp. 646-648. 
[n]	S. Huang, S. BenLiang, Y. R. Lu, and K. Zhu, “Simulation of Plasma Window for Gas Target of Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB010, pp. 3251-3253. 
[n]	F. Schliessmann et al., “Studies on a triple-turn energy-recovery mode at the S-DALINAC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2143-2146. doi:10.18429/JACoW-IPAC2023-TUPL169
[n]	R. B. Palmer and R. C. Fernow, “Charge Separation for Muon Collider Cooling”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP001, pp. 103-105. 
[n]	C. Steier et al., “Design Progress of ALS-U, the Soft X-ray Diffraction Limited Upgrade of the Advanced Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1639-1642. doi:10.18429/JACoW-IPAC2019-TUPGW097
[n]	J. Ungrin et al., “Operating Experience with the IMPELA-10/50 Industrial Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH403, pp. 587-589. 
[n]	J. H. Wu and L.-H. Yu, “High Gain Harmonic Generation X-ray Free Electron Laser”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH107, pp. 2716-2718. 
[n]	P. Sp?ñdtke and R. Keller, “Pre-Acceleration of High-Current Ion Beams”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0013, pp. 121-123. 
[n]	A. Jackson, N. Marks, M. W. Poole, G. Saxon, V. P. Suller, and R. P. Walker, “Transverse Instabilities in the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2522-2525. 
[n]	L. S. Nadolski et al., “Orbit Stability Status and Improvement at SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC065, pp. 3134-3136. 
[n]	M. Niigaki et al., “Current Status of Development in TETD of High-power Vacuum Microwave Devices”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD015, pp. 475-477. 
[n]	G. Kruk et al., “How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors' Controls Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB05, pp. 43-46. 
[n]	C. H. Ho et al., “High Power Test Results of the First SRRC/ANL High Current L-Band RF Gun”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4055, pp. 520-522. 
[n]	M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400. 
[n]	K. A. Brown et al., “Multiple Single Bunch Extraction to the AGS Switchyard”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH130, pp. 1514-1516. 
[n]	F. Lin, Y. S. Derbenev, V. S. Morozov, Y. Zhang, and K. B. Beard, “Optimization of Chromaticity Compensation and Dynamic Aperture in MEIC Collider Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC099, pp. 1389-1391. 
[n]	C. M. Baffes, M. D. Church, J. R. Leibfritz, S. A. Oplt, and I. L. Rakhno, “Mechanical Design of a High Energy Beam Absorber for the Advanced Superconducting Test Accelerator (ASTA) at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD034, pp. 2582-2584. 
[n]	S. Persichelli, M. Migliorati, M. M. Paoluzzi, and B. Salvant, “Impedance Studies for the PS Finemet?« Loaded Longitudinal Damper”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1708-1710. doi:10.18429/JACoW-IPAC2014-TUPRI060
[n]	M. Borland et al., “Survey of Commissioning of Recent Storage Ring Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2482-2484. doi:10.18429/JACoW-IPAC2015-WEBD2
[n]	M. Shimada et al., “Systematic Measurements of the Coherent THz Spectra by Magnetic Bunch Compression at the Compact ERL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1486-1488. doi:10.18429/JACoW-IPAC2019-TUPGW037
[n]	L. M. Bobb and G. Rehm, “Beam Size Measurement Using High Aspect Ratio LIGA Apertures in an X-Ray Pinhole Camera”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 445-447. doi:10.18429/JACoW-IPAC2017-MOPAB132
[n]	J. Tuggle, M. J. Kelley, A. D. Palczewski, C. E. Reece, and F. A. Stevie, “Investigation of Low-Level Nitrogen in Niobium by Secondary Ion Mass Spectrometry”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 196-198. doi:10.18429/JACoW-LINAC2016-MOPLR025
[n]	K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011. 
[n]	T. Biallas et al., “Experimental Results from an Injector for an IR FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP29F, pp. 1447-1449. 
[n]	H. Jaeckle, F. Jenni, and X. H. Ke, “Practical Experience with Self-optimizing, High Dynamic Control of Accelerator Magnet Power Supplies”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO011, pp. 3355-3357. 
[n]	M. G. Tiefenback, V. L. Bailey, and S. D. Putnam, “Electron Transport in Stellarator Fields”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 872-874. 
[n]	W. Kalbreier, G. Roy, and F. Ruggiero, “A Vertical Mid-arc Separation System for an 8ex8e-Bunch Operation of LEP2 with 90/circ/60/circ Phase Advance Optics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 448-451. 
[n]	T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129. 
[n]	J. T. Seeman and C. Adolphsen, “Beam Phase Space Determination at 50 GeV in the SLC Linac”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 275-279. 
[n]	P. Bauer et al., “Advances in the Understanding and Operations of Superconducting Colliders”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA001, pp. 54-58. 
[n]	A. Bortniansky et al., “Analytical Complexes for Ion Beam Analysis and Modification of Materials in St. Petersburg and Bratislava”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP033G, pp. 2696-2698. 
[n]	T. Plomion et al., “Preliminary Design of the IFMIF-DONES Superconducting Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 311-314. doi:10.18429/JACoW-SRF2019-MOP097
[n]	H. Zen, K. Tanaka, Y. Zhao, and H. Ohgaki, “Commissioning of new photocathode RF gun for oscillator-type mid-infrared free-electron laser at Kyoto University”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL046, unpublished. 
[n]	D. Gonnella et al., “Nitrogen-Doped 9-Cell Cavity Performance in the Cornell Horizontal Test Cryomodule”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP018, pp. 88-91. 
[n]	C.-Y. Liu, Y.-C. Chien, and H. M. Shih, “Performance Evaluation of the Switching Mode AC Power Supply”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP125, pp. 3652-3654. 
[n]	C. H. Joshi, T. Grimm, A. Mavanur, and C.-Y. Tai, “Magnetostrictive Tuners for SRF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB089, pp. 1407-1409. 
[n]	D. J. Summers, L. M. Cremaldi, R. Godang, B. R. Kipapa, R. B. Palmer, and H. E. Rice, “Muon Acceleration to 750 GeV in the Tevatron Tunnel for a 1.5 TeV mu+ mu- Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS082, pp. 3178-3180. 
[n]	K. L. Mahoney, I. T. Carlino, K. Kindrew, T. L. Larrieu, T. S. McGuckin, and N. Okay, “Jefferson Lab Personnel Safety Electronic Log RMA”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP046, pp. 188-190. 
[n]	R. De Maria, S. D. Fartoukh, and M. Fitterer, “HLLHCV1.1 Optics Version for the HL-LHC Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2090-2093. doi:10.18429/JACoW-IPAC2015-TUPTY037
[n]	B. Jones et al., “Injection and Stripping Foil Studies for a 180 MeV Injection Upgrade at ISIS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C01, pp. 456-460. 
[n]	J. S. Kim, R. H. Miller, C. D. Nantista, S. G. Tantawi, D. H. Whittum, and A. W. Weidemann, “A Resonant Cavity for Single-Shot Emittance Measurement”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH053, pp. 1345-1347. 
[n]	A. A. Gorzawski et al., “The AccTesting Framework: An Extensible Framework for Accelerator Commissioning and Systematic Testing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC078, pp. 1250-1253. 
[n]	M. Incurvati et al., “Fast High-Power Power Supply for Scanning Magnets of CNAO Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP122, pp. 3643-3645. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search