Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A.G.Afonin, V.N.Gorlov, V.N.Gres, V.I.Terekhov, “THE FIRST EXPERIENCE WITH SPACE SCANNING EXTRACTED BEAM ON THE SPIN@U-70 SETUP TARGET: POSSIBILITY AND MEASUREMENT TOOL”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP27, pp. XX-XX.
[n] D. Pellegrini, A. Latina, D. Schulte, and S. A. Bogacz, “Single and Multi-bunch End-to-end Tracking in the LHeC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 459-461. doi:10.18429/JACoW-IPAC2015-MOPJE066
[n] D. M. Dykes, “RF System Changes Associated with the SRS Upgrade”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP014L, pp. 1946-1948.
[n] G. Bassi, A. Blednykh, J. Choi, and V. V. Smaluk, “Decoherence due to Second Order Chromaticity in the NSLS-II Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 737-739. doi:10.18429/JACoW-IPAC2015-MOPMN016
[n] Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436.
[n] K. Okamura et al., “SiC-JFET Switching Power Supply toward for Induction Ring Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 523-525. doi:10.18429/JACoW-IPAC2014-MOPME068
[n] D. Xiang et al., “First Principle Measurements of Thermal Emittance for Copper and Magnesium”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN055, pp. 1049-1051.
[n] C. Mi et al., “A New Bipolar qtrim Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3621-3623. doi:10.18429/JACoW-IPAC2015-WEPWI057
[n] R. T. Dowd, Y. E. Tan, and K. P. Wootton, “Vertical Emittance at the Quantum Limit”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1096-1098. doi:10.18429/JACoW-IPAC2014-TUPRO035
[n] R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 926-929.
[n] W. H. Urbanus et al., “MEQALAC, A 1 MeV Multi-Channel RF-Accelerator for Light Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 427-430.
[n] Z. Yang et al., “Transverse Profile Expansion and Homogenization for the Beamline of XIPAF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1346-1348. doi:10.18429/JACoW-IPAC2016-TUPMR042
[n] A. Liu, A. D. Bross, and D. V. Neuffer, “nuSTORM Horn Optimization Study”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1562-1564. doi:10.18429/JACoW-IPAC2014-TUPRI005
[n] S. Casalbuoni et al., “Magnetic Measurements of the 1.5 m Coils of the ANKA Superconducting Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD017, pp. 3123-3125.
[n] G. Balik et al., “Active Vibration Isolation System for CLIC Final Focus”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1775-1777. doi:10.18429/JACoW-IPAC2014-TUPRI088
[n] G. Chiozzi et al., “Common Software for the ALMA project”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAT005, pp. XX-XX.
[n] H. Higaki et al., “Mismatch Induced Oscillations of Space Charge Dominated Beams in a Uniform Focusing Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA006, pp. 1336-1338.
[n] M. Kuriki et al., “Development of a High Average Power Laser Generating Electron Beam in ILC Format for KEK-STF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC024, pp. 4098-4100.
[n] K. S. B. Li et al., “Electron Cloud Observations during LHC Operation with 25 ns Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1458-1461. doi:10.18429/JACoW-IPAC2016-TUPMW017
[n] B. L. Qian, C. Chen, and J. Zhou, “Image-Charge Effects on the Envelope Dynamics of an Unbunched Intense Charged-Particle Beam”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG036, pp. 2966-2968.
[n] S. M. White, N. Carmignani, M. Dubrulle, M. Morati, and P. Raimondi, “Transparent Injection for ESRF-EBS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 78-81. doi:10.18429/JACoW-IPAC2019-MOPGW008
[n] F. Tamura et al., “Commissioning of Beam Loading Compensation System in the J-PARC MR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA020, pp. 2540-2542.
[n] R. E. Rand, “A Multi-Orbit Recirculation System for a Superconducting Linear Accelerator-The Recyclotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 938-943.
[n] J. G. M. Kleeven, M. Abs, J. Brison, E. Forton, J. M. Hubert, and J. Walle, “Design and Simulation Tools for the High-Intensity Industrial Rhodotron Electron Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 651-654. doi:10.18429/JACoW-IPAC2018-TUYGBF4
[n] Y. Funakoshi et al., “KEKB Performance”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT067, pp. 707-709.
[n] O. Delferri?¿re et al., “A Homogeneous Superconducting Combined Multipole Magnet for the Large Acceptance Spectrometer S3, based on Flat Racetrack Coils”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB024, pp. 328-330.
[n] M. Aiba, M. B?Âge, F. Marcellini, A. Saa Hernandez, and A. Streun, “Longitudinal Top-up Injection for Small Aperture Storage Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1842-1844. doi:10.18429/JACoW-IPAC2014-WEOAA01
[n] A. V. Shemchuk et al., “Magnetic Measurement System For The NICA Quadrupole Magnets”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 559-562. doi:10.18429/JACoW-RUPAC2016-THPSC010
[n] K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, and J. J. Petillo, “A Theoretical Photocathode Emittance Model Including Temperature and Field Effects”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS091, pp. 1377-1379.
[n] A. Goldblatt, E. Bravin, F. Roncarolo, G. Trad, and T. M. Mitsuhashi, “Design and Performance of Coronagraph for Beam Halo Measurements in the LHC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 253-256. doi:10.18429/JACoW-IBIC2016-MOPG74
[n] G. R. White et al., “Plans and Progress towards Tuning the ATF2 Final Focus System to Obtain a 35nm IP Waist”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP021, pp. 4353-4355.
[n] A. Liu, A. D. Bross, and J.-B. Lagrange, “A FODO Beam Line Design for nuPIL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3375-3377. doi:10.18429/JACoW-IPAC2016-THPMB055
[n] V. Mironov, J. P. M. Beijers, S. Brandenburg, H. R. Kremers, J. Mulder, and S. Saminathan, “Operations of KVI AECRIS at AGOR Superconducting Cyclotron Facility”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-16, pp. 106-106.
[n] A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, and C. Mai, “Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 246-249. doi:10.18429/JACoW-FEL2019-TUP080
[n] S. Y. Kim et al., “Longitudinal Bunch Shaping Using an X-Band Transverse Deflecting Cavity Powered by Wakefield Power Extractor at Argonne Wakefield Accelerator Facility”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1655-1658. doi:10.18429/JACoW-IPAC2022-WEOZSP1
[n] M. Jonker et al., “The CLIC Machine Protection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB071, pp. 2860-2862.
[n] A. V. Aleksandrov, “SNS Beam Diagnostics: Present Status and Future Plans”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD21, pp. 95-97.
[n] G. Ciavola et al., “Comparison of Operations of the SERSE Ion Source at 18 and 28 GHz”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH304, pp. 2409-2411.
[n] Yu. A. Rogovsky, E. Perevedentsev, V. Volkov, and Yu. M. Zharinov, “The Longitudinal Distribution and Bunch Length Measurements at VEPP-2000 Collider”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 673-675. doi:10.18429/JACoW-RUPAC2016-THPSC060
[n] G. D'Agostino, L. Calabretta, W. J. G. M, and D. Rifuggiato, “A CENTRAL REGION UPGRADE OF THE k800 SUPERCONDUCTING CYCLOTRON AT INFN-LNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1975-1978. doi:10.18429/JACoW-IPAC2019-TUPTS023
[n] J. H. Han, H.-S. Kang, and I. S. Ko, “Status of the PAL-XFEL Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP061, pp. 1735-1737.
[n] M. Miski-Oglu et al., “Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 33-36. doi:10.18429/JACoW-IPAC2019-MOZZPLM1
[n] J. H. Shao et al., “Systematic Benchmarking of a Planar (N)UNCD Field Emission Cathode”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2083-2086. doi:10.18429/JACoW-IPAC2019-TUPTS070
[n] S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 47-51. doi:10.18429/JACoW-IPAC2016-MOZB01
[n] D. Hernandez and B. Erdelyi, “Charge Density Estimations with Orthogonal Polynomials”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC094, pp. 355-357.
[n] A. Y. Zelinsky et al., “Status of NESTOR Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA063, pp. 2630-2632.
[n] F. Lemery, M. Dohlus, K. Fl?Âttmann, M. Ivanyan, M. Marx, and V. M. Tsakanov, “A Versatile THz Source for High-Repetition Rate XFELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 688-691. doi:10.18429/JACoW-FEL2019-THP049
[n] R. G. Heine, K. Aulenbacher, L. M. Hein, and C. Matejcek, “Current Status of the Milliampere Booster for the Mainz Energy-recovering Superconducting Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1741-1743. doi:10.18429/JACoW-IPAC2016-TUPOW002
[n] V. Raginel, B. Auchmann, D. Kleiven, R. Schmidt, A. P. Verweij, and D. Wollmann, “Degradation of the Insulation of the LHC Main Dipole Cable when Exposed to High Temperatures”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1186-1189. doi:10.18429/JACoW-IPAC2016-TUPMB038
[n] U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1466-1468. doi:10.18429/JACoW-IPAC2015-TUPWA028
[n] W. Fischer et al., “First Experience with Electron Lenses for Beam-beam Compensation in RHIC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 913-917. doi:10.18429/JACoW-IPAC2014-TUYA01
[n] S. A. Krutikhin et al., “ACCELERATING RF STATION FOR HIRFL-CSR, LANZHOU, CHINA”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUGP08, pp. XX-XX.
[n] P. Rosinsky et al., “Computing Architecture of the ALICE Detector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN018, pp. 134-136.
[n] A. M. Lombardi, E. Zh. Sargsyan, R. Scrivens, V. Coco, and J. A. Chamings, “Acceleration of Several Charge States of Lead Ion in CERN LINAC3”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP27, pp. 351-353.
[n] S. A. Veitzer and P. Stoltz, “Simulating Electron Cloud Evolution using Modulated Dielectric Models”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO068, pp. 1043-1045.
[n] A. I. Kvasha, V. L. Serov, and A. Feschenko, “Development of the INR Linear Accelerator DTL RF System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 191-195. doi:10.18429/JACoW-RUPAC2016-THXSH01
[n] I. Mardor et al., “The SARAF CW 40 MeV Proton/Deuteron Accelerator”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOODAU04, pp. 74-80.
[n] V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
[n] A. Streun, M. Aiba, M. B?Âge, T. Garvey, and V. Schlott, “Towards an Upgrade of the Swiss Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4358-4361. doi:10.18429/JACoW-IPAC2018-THPMK029
[n] T. Zhang et al., “Generating Polarization Controllable FELs at Dalian Coherent Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB102, pp. 2071-2073.
[n] A. Chanc?® et al., “Status of the Beam Optics of the Future Hadron-Hadron Collider FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1470-1472. doi:10.18429/JACoW-IPAC2016-TUPMW020
[n] R. T. Dowd, M. P. Atkinson, M. J. Boland, G. LeBlanc, Y. E. Tan, and K. Zingre, “Transverse Bunch by Bunch Feedback Operations at the Australian Synchrotron Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 769-772. doi:10.18429/JACoW-IPAC2015-MOPHA001
[n] A. Marsili, R. Bruce, F. Cerutti, and S. Redaelli, “Simulations and Measurements of Physics Debris Losses at the 4 TeV LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO041, pp. 984-986.
[n] J. Bobbitt, “Applications of Microprocessors in Accelerators”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1065-1069.
[n] G. Geloni, P. Ilinski, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Method for the Determination of the Three-Dimensional Structure of Ultrashort Relativistic Electron Bunches”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC47, pp. 607-610.
[n] D. Horikawa et al., “Study of Electrostatic Septum by Low-Z Material for High Intensity Proton Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD052, pp. 484-486.
[n] R. M. Zwaska, S. C. Childress, A. I. Drozhdin, N. V. Mokhov, and I. S. Tropin, “Beam Loss Protection for a 2.3 Megawatt LBNE Proton Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD041, pp. 454-456.
[n] Y. Zhang et al., “SRF Cavity Transient Beam Loading Detection - Simulation and Measurement”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS080, pp. 2517-2519.
[n] Z. Parsa and V. Zadorozhny, “ACCELERATION AND FOCUSING AS OPTIMAL CONTROL FOR DYNAMIC SYSTEMS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP27, pp. XX-XX.
[n] M. Kranjcevic, A. Adelmann, P. Arbenz, S. Gorgi Zadeh, and U. van Rienen, “Constrained Multi-Objective Shape Optimization of Superconducting RF Cavities to Counteract Dangerous Higher Order Modes”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 293-296. doi:10.18429/JACoW-ICAP2018-TUPAG14
[n] T. Yorita et al., “Study of Extraction and Transport of Intense Highly Charged Ions for 18GHz SC-ECRIS at RCNP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA031, pp. 145-147.
[n] A. Toyoda et al., “Recent development of a monitoring system for beam line status at the J-PARC slow-extraction beam line”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_070.
[n] D. Bolkhovityanov and P. B. Cheblakov, “PCI Hardware Support in LIA-2 Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN017, pp. 916-918.
[n] V. Zvyagintsev, R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, and Z. Y. Yao, “Coupler Design for RISP Spoke Cavity”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 372-374. doi:10.18429/JACoW-RUPAC2018-WEPSB47
[n] N. Fukunishi et al., “Present Performance And Commissioning Details Of Ribf Accelerator Complex”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 21-23.
[n] G. Chlachidze et al., “Quench Performance and Field Quality of 90-mm Nb3Sn Quadrupoles of TQC Series”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD034, pp. 3581-3583.
[n] O. E. Gorda et al., “Status of Ion-optical Design of the Collector Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1114-1116. doi:10.18429/JACoW-IPAC2014-TUPRO041
[n] A. Variola et al., “ERL Parameters for Compton Polarized Positron Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP068, pp. 524-526.
[n] C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1104-1109.
[n] M. G. Pullia et al., “The Experimental Beam Line at CNAO”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1334-1336. doi:10.18429/JACoW-IPAC2016-TUPMR038
[n] S. Yamada et al., “Present Status of the HIMAC Injector (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-27, pp. 768-770.
[n] E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 325-327. doi:10.18429/JACoW-FEL2019-WEP004
[n] M. Heilmann et al., “High Current Proton and Carbon Beam Operation via Stripping of a Molecular Beam at GSI UNILAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1390-1393. doi:10.18429/JACoW-IPAC2016-TUPMR057
[n] L. Wang, H. Ikeda, K. Ohmi, K. Oide, and D. Zhou, “Validation of the Microwave Instability in the Damping Ring of SuperKEKB using VFP Solver”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME017, pp. 1604-1606.
[n] H. Shaker, S. Lal, H. J. Qian, G. Shu, and F. Stephan, “Beam Dynamics Optimization of a Normal-Conducting Gun Based CW Injector for the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 452-455. doi:10.18429/JACoW-FEL2019-WEP054
[n] M. Kinsho, “Status of J-PARC 3 GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP083, pp. 3927-3929.
[n] K. Seiya et al., “Status of Slip Stacking at Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA004, pp. 347-349.
[n] F. Zimmermann et al., “Designs for a Linac-Ring LHeC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB039, pp. 1611-1613.
[n] P. Scharrer et al., “An Upgrade for the 1.4 MeV/u Gas Stripper at the GSI UNILAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1394-1396. doi:10.18429/JACoW-IPAC2016-TUPMR058
[n] V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418.
[n] E. Bagli, V. Guidi, and V. A. Maisheev, “ECHARM - a Software for Calculation of Physical Quantities of Interest in Coherent Interaction of Relativistic Particles with Crystals”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA070, pp. 1485-1487.
[n] K. Sennyu, H. Hara, F. Inoue, K. Kanaoka, and K. Okihira, “Industrialization of ILC from a View Point of Industry”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEIB203, pp. 2110-2114.
[n] E. Barzi et al., “The need for Nb3Sn coated Cu cavities for future accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2639-2641. doi:10.18429/JACoW-IPAC2023-WEOGC1
[n] H. Yu et al., “Studies on Higher Order Modes Damper for the 3rd Harmonic Superconducting”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA050, pp. 2600-2602.
[n] D. Ondreka, H. Liebermann, and B. R. Schlei, “Optimization of the SIS18 Injector Operation for FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2088-2090. doi:10.18429/JACoW-IPAC2014-WEPRO061
[n] W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 231. doi:10.18429/JACoW-ICALEPCS2019-MOPHA017
[n] S. Franke et al., “Moment-Based Simulation of the S-DALINAC Recirculations”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC092, pp. 2223-2225.
[n] K. W. Shepard, P. N. Potukuchi, and A. Roy, “Niobium Coaxial Quarter-Wave Cavities”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-89, pp. 287-289.
[n] R. Leh?® and J.-L. Vay, “Review of Spectral Maxwell Solvers for Electromagnetic Particle-in-Cell: Algorithms and Advantages”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 345-349. doi:10.18429/JACoW-ICAP2018-WEPLG05
[n] S. K. Shukla, R. Sridhar, D. P. Yadav, R. J. Patel, and A. S. Raja Rao, “Design Aspects of UHV System for INDUS-2.”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D043, pp. 779-781.
[n] S. Weathersby et al., “Timing of ultrafast electron and laser pulses with narrowband THz interferometry for ultrafast electron diffraction”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 607-610. doi:10.18429/JACoW-NAPAC2025-TUP099
[n] S. M. Lewis et al., “Design of a High Gradient THz-Driven Electron Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2098-2100. doi:10.18429/JACoW-IPAC2019-TUPTS077
[n] S. Bandyopadhyay and M. Das, “Regulation Scheme for Precision Magnet Power Supply”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA028, pp. 669-670.
[n] G. S. Levine and J. C. Balsamo, “The AGS Beam Loss Monitoring System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1069-1072.
[n] M. A. Lyalin, I. Koop, and D. B. Shwartz, “Nonlinear Correctors Tuning for the Collector Ring Isochronous Mode”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2218-2220. doi:10.18429/JACoW-IPAC2021-TUPAB311
[n] V. V. Gambaryan and A. A. Starostenko, “Fast Kicker”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1001-1003. doi:10.18429/JACoW-IPAC2015-MOPTY033
[n] P. Kuske, “Longitudinal Beam Dynamics of a Laser Sliced Bunch”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO025, pp. 3397-3399.
[n] S. Russenschuck, G. Caiafa, L. Fiscarelli, M. Liebsch, C. Petrone, and P. Rogacki, “Challenges in Extracting Pseudo-Multipoles From Magnetic Measurements”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 87-92. doi:10.18429/JACoW-ICAP2018-SUPAG03
[n] G. H. Miller and G. J. Lockwood, “Calorimetric Determination of Beam Energy”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1072-1076.
[n] J. O. Archambeau, G. W. Bennett, and G. S. Levine, “Application of Proton Radiation Therapy”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1007-1010.
[n] N. I. Tarantin, “NEW METHOD OF ELECTROSTATIC ACCELERATING AND STRONG QUADRUPOLE FOCUSING OF CHARGED PARTICLES ON HIGH VOLTAGE ACCELERATORS OF DIRECT ACTION AND ITS POSSIBLE APPLICATIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP26, pp. XX-XX.
[n] A. Zografos et al., “Engineering Prototype for a Compact Medical Dielectric Wall Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS087, pp. 3636-3638.
[n] D. Song, G. Hahn, J. Ko, J. Y. Huang, S.-W. Jang, and W. Song, “A Simulation Study on Residual Gas Chamber Based Photon Beam Position Monitor”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL155, unpublished.
[n] T. Himel and K. A. Thompson, “Energy Measurements from Betatron Oscillations”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1529-1531.
[n] O. Hryhorenko, C. Z. Antoine, M. Chabot, and D. Longuevergne, “Metallographic Polishing Pathway to the Future of Large Scale SRF Facilities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 828-832. doi:10.18429/JACoW-SRF2019-THP002
[n] V. Skalyga et al., “Gasdynamic ECR Sources of Multicharged Ions”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUCO-A02, pp. 128-130.
[n] M. Brown et al., “Design of a low-power proof-of-concept multi-stage amplifier test stand to model and implement outphasing control for the LANSCE 805 MHz solid-state high-power RF amplifier”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 725-729. doi:10.18429/JACoW-NAPAC2025-WEP020
[n] M. J. Barnes et al., “Upgrade of the LHC Injection Kicker Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA030, pp. 729-731.
[n] R. Hajima et al., “Generation of Laser Compton Scattered Gamma-rays from a 150-MeV Microtron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA009, pp. 3645-3647.
[n] L. W. Feng et al., “Control System for DC-SRF Photo-Injector at Peking University”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 962-964. doi:10.18429/JACoW-IPAC2015-MOPTY013
[n] J. P. Duris, R. K. Li, P. Musumeci, E. W. Threlkeld, and M. T. Westfall, “High-Gradient High-Energy-Gain Inverse Free Electron Laser Experiment using a Helical Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP102, pp. 289-291.
[n] F. Carra et al., “Ultra-High Vacuum Characterization of Molybdenum-Carbide Graphite for HL-LHC Collimators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1078-1081. doi:10.18429/JACoW-IPAC2019-MOPTS093
[n] V. G. Dudnikov et al., “Radio Frequency Surface Plasma Source With Solenoidal Magnetic Field”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 902-905. doi:10.18429/JACoW-LINAC2016-THPLR026
[n] C. O. Maidana, M. Jonker, and A. Latina, “Failure Studies at the Compact Linear Collider: Main Linac and Beam Delivery System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR038, pp. 4056-4058.
[n] W. J. M. Weterings et al., “Upgrade of the LHC Beam Dumping Protection Elements”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD081, pp. 556-558.
[n] C. Chang, J. Neilson, C. Pellegrini, M. Shumail, and S. G. Tantawi, “Single Electron Dynamic of Microwave Undulator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP085, pp. 753-755.
[n] S. Seletskiy, T. A. Miller, and P. Thieberger, “Study of YAG Exposure Time for LEReC RF Diagnostic Beamline”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 233-235. doi:10.18429/JACoW-IBIC2016-MOPG69
[n] A. A. Garren and D. E. Johnson, “Modifications to the SSC Lattice”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 163-166.
[n] A. Liu, P. V. Avrakhov, C.-J. Jing, and R. A. Kostin, “pyaopt Optimization Suite and its Applications to an SRF Cavity Design for UEMs”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 229-232. doi:10.18429/JACoW-ICAP2018-TUPAF19
[n] V. G. Mudrolyubov et al., “The CC1-3 Cyclotron System. Installation and Test Results”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 182-184. doi:10.18429/JACoW-RUPAC2016-TUCASH05
[n] C. Szwaj et al., “Single-Shot Electro-Optic Sampling Combined With Photonic Time-Stretch: Detailed Results at SOLEIL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 795-797. doi:10.18429/JACoW-IPAC2015-MOPHA009
[n] X. Lu et al., “Development progress of high-level applications for the HEPS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4259-4261. doi:10.18429/JACoW-IPAC2023-THPA125
[n] E. Vogel et al., “Status of the All Superconducting Gun Cavity at DESY”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1087-1090. doi:10.18429/JACoW-SRF2019-THP080
[n] J. I. Iversen, A. Brinkmann, A. Ermakov, A. Muhs, and J. Ziegler, “Insight into DESYÔÇÖs Test Laboratory for Niobium Raw Material and Semi-finished Products”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1157-1161. doi:10.18429/JACoW-SRF2019-THP100
[n] W. J. Han, X. Liu, and B. Qin, “Design Study of a Fast Kicker Magnet Applied to the Beamline of a Proton Therapy Facility”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 110-112. doi:10.18429/JACoW-ICAP2018-SUPAG10
For LaTeX
Use Complete Form
For BibTeX
References
- A.G.Afonin, V.N.Gorlov, V.N.Gres, V.I.Terekhov, “THE FIRST EXPERIENCE WITH SPACE SCANNING EXTRACTED BEAM ON THE SPIN@U-70 SETUP TARGET: POSSIBILITY AND MEASUREMENT TOOL”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP27, pp. XX-XX.
- D. Pellegrini, A. Latina, D. Schulte, and S. A. Bogacz, “Single and Multi-bunch End-to-end Tracking in the LHeC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 459-461.
- D. M. Dykes, “RF System Changes Associated with the SRS Upgrade”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP014L, pp. 1946-1948.
- G. Bassi, A. Blednykh, J. Choi, and V. V. Smaluk, “Decoherence due to Second Order Chromaticity in the NSLS-II Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 737-739.
- Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436.
- K. Okamura et al., “SiC-JFET Switching Power Supply toward for Induction Ring Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 523-525.
- D. Xiang et al., “First Principle Measurements of Thermal Emittance for Copper and Magnesium”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN055, pp. 1049-1051.
- C. Mi et al., “A New Bipolar qtrim Power Supply System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3621-3623.
- R. T. Dowd, Y. E. Tan, and K. P. Wootton, “Vertical Emittance at the Quantum Limit”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1096-1098.
- R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 926-929.
- W. H. Urbanus et al., “MEQALAC, A 1 MeV Multi-Channel RF-Accelerator for Light Ions”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 427-430.
- Z. Yang et al., “Transverse Profile Expansion and Homogenization for the Beamline of XIPAF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1346-1348.
- A. Liu, A. D. Bross, and D. V. Neuffer, “nuSTORM Horn Optimization Study”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1562-1564.
- S. Casalbuoni et al., “Magnetic Measurements of the 1.5 m Coils of the ANKA Superconducting Undulator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD017, pp. 3123-3125.
- G. Balik et al., “Active Vibration Isolation System for CLIC Final Focus”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1775-1777.
- G. Chiozzi et al., “Common Software for the ALMA project”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAT005, pp. XX-XX.
- H. Higaki et al., “Mismatch Induced Oscillations of Space Charge Dominated Beams in a Uniform Focusing Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA006, pp. 1336-1338.
- M. Kuriki et al., “Development of a High Average Power Laser Generating Electron Beam in ILC Format for KEK-STF”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC024, pp. 4098-4100.
- K. S. B. Li et al., “Electron Cloud Observations during LHC Operation with 25 ns Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1458-1461.
- B. L. Qian, C. Chen, and J. Zhou, “Image-Charge Effects on the Envelope Dynamics of an Unbunched Intense Charged-Particle Beam”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG036, pp. 2966-2968.
- S. M. White, N. Carmignani, M. Dubrulle, M. Morati, and P. Raimondi, “Transparent Injection for ESRF-EBS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 78-81.
- F. Tamura et al., “Commissioning of Beam Loading Compensation System in the J-PARC MR”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA020, pp. 2540-2542.
- R. E. Rand, “A Multi-Orbit Recirculation System for a Superconducting Linear Accelerator-The Recyclotron”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 938-943.
- J. G. M. Kleeven, M. Abs, J. Brison, E. Forton, J. M. Hubert, and J. Walle, “Design and Simulation Tools for the High-Intensity Industrial Rhodotron Electron Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 651-654.
- Y. Funakoshi et al., “KEKB Performance”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT067, pp. 707-709.
- O. Delferri?¿re et al., “A Homogeneous Superconducting Combined Multipole Magnet for the Large Acceptance Spectrometer S3, based on Flat Racetrack Coils”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB024, pp. 328-330.
- M. Aiba, M. B?Âge, F. Marcellini, A. Saa Hernandez, and A. Streun, “Longitudinal Top-up Injection for Small Aperture Storage Rings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1842-1844.
- A. V. Shemchuk et al., “Magnetic Measurement System For The NICA Quadrupole Magnets”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 559-562.
- K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, and J. J. Petillo, “A Theoretical Photocathode Emittance Model Including Temperature and Field Effects”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS091, pp. 1377-1379.
- A. Goldblatt, E. Bravin, F. Roncarolo, G. Trad, and T. M. Mitsuhashi, “Design and Performance of Coronagraph for Beam Halo Measurements in the LHC”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 253-256.
- G. R. White et al., “Plans and Progress towards Tuning the ATF2 Final Focus System to Obtain a 35nm IP Waist”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP021, pp. 4353-4355.
- A. Liu, A. D. Bross, and J.-B. Lagrange, “A FODO Beam Line Design for nuPIL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3375-3377.
- V. Mironov, J. P. M. Beijers, S. Brandenburg, H. R. Kremers, J. Mulder, and S. Saminathan, “Operations of KVI AECRIS at AGOR Superconducting Cyclotron Facility”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-16, pp. 106-106.
- A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, and C. Mai, “Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 246-249.
- S. Y. Kim et al., “Longitudinal Bunch Shaping Using an X-Band Transverse Deflecting Cavity Powered by Wakefield Power Extractor at Argonne Wakefield Accelerator Facility”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1655-1658.
- M. Jonker et al., “The CLIC Machine Protection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB071, pp. 2860-2862.
- A. V. Aleksandrov, “SNS Beam Diagnostics: Present Status and Future Plans”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD21, pp. 95-97.
- G. Ciavola et al., “Comparison of Operations of the SERSE Ion Source at 18 and 28 GHz”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH304, pp. 2409-2411.
- Yu. A. Rogovsky, E. Perevedentsev, V. Volkov, and Yu. M. Zharinov, “The Longitudinal Distribution and Bunch Length Measurements at VEPP-2000 Collider”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 673-675.
- G. D'Agostino, L. Calabretta, W. J. G. M, and D. Rifuggiato, “A CENTRAL REGION UPGRADE OF THE k800 SUPERCONDUCTING CYCLOTRON AT INFN-LNS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1975-1978.
- J. H. Han, H.-S. Kang, and I. S. Ko, “Status of the PAL-XFEL Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP061, pp. 1735-1737.
- M. Miski-Oglu et al., “Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 33-36.
- J. H. Shao et al., “Systematic Benchmarking of a Planar (N)UNCD Field Emission Cathode”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2083-2086.
- S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 47-51.
- D. Hernandez and B. Erdelyi, “Charge Density Estimations with Orthogonal Polynomials”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC094, pp. 355-357.
- A. Y. Zelinsky et al., “Status of NESTOR Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA063, pp. 2630-2632.
- F. Lemery, M. Dohlus, K. Fl?Âttmann, M. Ivanyan, M. Marx, and V. M. Tsakanov, “A Versatile THz Source for High-Repetition Rate XFELs”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 688-691.
- R. G. Heine, K. Aulenbacher, L. M. Hein, and C. Matejcek, “Current Status of the Milliampere Booster for the Mainz Energy-recovering Superconducting Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1741-1743.
- V. Raginel, B. Auchmann, D. Kleiven, R. Schmidt, A. P. Verweij, and D. Wollmann, “Degradation of the Insulation of the LHC Main Dipole Cable when Exposed to High Temperatures”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1186-1189.
- U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1466-1468.
- W. Fischer et al., “First Experience with Electron Lenses for Beam-beam Compensation in RHIC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 913-917.
- S. A. Krutikhin et al., “ACCELERATING RF STATION FOR HIRFL-CSR, LANZHOU, CHINA”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUGP08, pp. XX-XX.
- P. Rosinsky et al., “Computing Architecture of the ALICE Detector Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN018, pp. 134-136.
- A. M. Lombardi, E. Zh. Sargsyan, R. Scrivens, V. Coco, and J. A. Chamings, “Acceleration of Several Charge States of Lead Ion in CERN LINAC3”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP27, pp. 351-353.
- S. A. Veitzer and P. Stoltz, “Simulating Electron Cloud Evolution using Modulated Dielectric Models”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO068, pp. 1043-1045.
- A. I. Kvasha, V. L. Serov, and A. Feschenko, “Development of the INR Linear Accelerator DTL RF System”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 191-195.
- I. Mardor et al., “The SARAF CW 40 MeV Proton/Deuteron Accelerator”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOODAU04, pp. 74-80.
- V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX.
- A. Streun, M. Aiba, M. B?Âge, T. Garvey, and V. Schlott, “Towards an Upgrade of the Swiss Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4358-4361.
- T. Zhang et al., “Generating Polarization Controllable FELs at Dalian Coherent Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEODB102, pp. 2071-2073.
- A. Chanc?® et al., “Status of the Beam Optics of the Future Hadron-Hadron Collider FCC-hh”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1470-1472.
- R. T. Dowd, M. P. Atkinson, M. J. Boland, G. LeBlanc, Y. E. Tan, and K. Zingre, “Transverse Bunch by Bunch Feedback Operations at the Australian Synchrotron Light Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 769-772.
- A. Marsili, R. Bruce, F. Cerutti, and S. Redaelli, “Simulations and Measurements of Physics Debris Losses at the 4 TeV LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO041, pp. 984-986.
- J. Bobbitt, “Applications of Microprocessors in Accelerators”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1065-1069.
- G. Geloni, P. Ilinski, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Method for the Determination of the Three-Dimensional Structure of Ultrashort Relativistic Electron Bunches”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC47, pp. 607-610.
- D. Horikawa et al., “Study of Electrostatic Septum by Low-Z Material for High Intensity Proton Beam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD052, pp. 484-486.
- R. M. Zwaska, S. C. Childress, A. I. Drozhdin, N. V. Mokhov, and I. S. Tropin, “Beam Loss Protection for a 2.3 Megawatt LBNE Proton Beam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD041, pp. 454-456.
- Y. Zhang et al., “SRF Cavity Transient Beam Loading Detection - Simulation and Measurement”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS080, pp. 2517-2519.
- Z. Parsa and V. Zadorozhny, “ACCELERATION AND FOCUSING AS OPTIMAL CONTROL FOR DYNAMIC SYSTEMS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP27, pp. XX-XX.
- M. Kranjcevic, A. Adelmann, P. Arbenz, S. Gorgi Zadeh, and U. van Rienen, “Constrained Multi-Objective Shape Optimization of Superconducting RF Cavities to Counteract Dangerous Higher Order Modes”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 293-296.
- T. Yorita et al., “Study of Extraction and Transport of Intense Highly Charged Ions for 18GHz SC-ECRIS at RCNP”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA031, pp. 145-147.
- A. Toyoda et al., “Recent development of a monitoring system for beam line status at the J-PARC slow-extraction beam line”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_070.
- D. Bolkhovityanov and P. B. Cheblakov, “PCI Hardware Support in LIA-2 Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN017, pp. 916-918.
- V. Zvyagintsev, R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, and Z. Y. Yao, “Coupler Design for RISP Spoke Cavity”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 372-374.
- N. Fukunishi et al., “Present Performance And Commissioning Details Of Ribf Accelerator Complex”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 21-23.
- G. Chlachidze et al., “Quench Performance and Field Quality of 90-mm Nb3Sn Quadrupoles of TQC Series”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD034, pp. 3581-3583.
- O. E. Gorda et al., “Status of Ion-optical Design of the Collector Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1114-1116.
- A. Variola et al., “ERL Parameters for Compton Polarized Positron Sources”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP068, pp. 524-526.
- C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1104-1109.
- M. G. Pullia et al., “The Experimental Beam Line at CNAO”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1334-1336.
- S. Yamada et al., “Present Status of the HIMAC Injector (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-27, pp. 768-770.
- E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 325-327.
- M. Heilmann et al., “High Current Proton and Carbon Beam Operation via Stripping of a Molecular Beam at GSI UNILAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1390-1393.
- L. Wang, H. Ikeda, K. Ohmi, K. Oide, and D. Zhou, “Validation of the Microwave Instability in the Damping Ring of SuperKEKB using VFP Solver”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME017, pp. 1604-1606.
- H. Shaker, S. Lal, H. J. Qian, G. Shu, and F. Stephan, “Beam Dynamics Optimization of a Normal-Conducting Gun Based CW Injector for the European XFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 452-455.
- M. Kinsho, “Status of J-PARC 3 GeV RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP083, pp. 3927-3929.
- K. Seiya et al., “Status of Slip Stacking at Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPA004, pp. 347-349.
- F. Zimmermann et al., “Designs for a Linac-Ring LHeC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB039, pp. 1611-1613.
- P. Scharrer et al., “An Upgrade for the 1.4 MeV/u Gas Stripper at the GSI UNILAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1394-1396.
- V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418.
- E. Bagli, V. Guidi, and V. A. Maisheev, “ECHARM - a Software for Calculation of Physical Quantities of Interest in Coherent Interaction of Relativistic Particles with Crystals”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA070, pp. 1485-1487.
- K. Sennyu, H. Hara, F. Inoue, K. Kanaoka, and K. Okihira, “Industrialization of ILC from a View Point of Industry”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEIB203, pp. 2110-2114.
- E. Barzi et al., “The need for Nb3Sn coated Cu cavities for future accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGC1, pp. 2639-2641.
- H. Yu et al., “Studies on Higher Order Modes Damper for the 3rd Harmonic Superconducting”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA050, pp. 2600-2602.
- D. Ondreka, H. Liebermann, and B. R. Schlei, “Optimization of the SIS18 Injector Operation for FAIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2088-2090.
- W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 231.
- S. Franke et al., “Moment-Based Simulation of the S-DALINAC Recirculations”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC092, pp. 2223-2225.
- K. W. Shepard, P. N. Potukuchi, and A. Roy, “Niobium Coaxial Quarter-Wave Cavities”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-89, pp. 287-289.
- R. Leh?® and J.-L. Vay, “Review of Spectral Maxwell Solvers for Electromagnetic Particle-in-Cell: Algorithms and Advantages”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 345-349.
- S. K. Shukla, R. Sridhar, D. P. Yadav, R. J. Patel, and A. S. Raja Rao, “Design Aspects of UHV System for INDUS-2.”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D043, pp. 779-781.
- S. Weathersby et al., “Timing of ultrafast electron and laser pulses with narrowband THz interferometry for ultrafast electron diffraction”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 607-610.
- S. M. Lewis et al., “Design of a High Gradient THz-Driven Electron Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2098-2100.
- S. Bandyopadhyay and M. Das, “Regulation Scheme for Precision Magnet Power Supply”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA028, pp. 669-670.
- G. S. Levine and J. C. Balsamo, “The AGS Beam Loss Monitoring System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1069-1072.
- M. A. Lyalin, I. Koop, and D. B. Shwartz, “Nonlinear Correctors Tuning for the Collector Ring Isochronous Mode”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2218-2220.
- V. V. Gambaryan and A. A. Starostenko, “Fast Kicker”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1001-1003.
- P. Kuske, “Longitudinal Beam Dynamics of a Laser Sliced Bunch”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO025, pp. 3397-3399.
- S. Russenschuck, G. Caiafa, L. Fiscarelli, M. Liebsch, C. Petrone, and P. Rogacki, “Challenges in Extracting Pseudo-Multipoles From Magnetic Measurements”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 87-92.
- G. H. Miller and G. J. Lockwood, “Calorimetric Determination of Beam Energy”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1072-1076.
- J. O. Archambeau, G. W. Bennett, and G. S. Levine, “Application of Proton Radiation Therapy”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1007-1010.
- N. I. Tarantin, “NEW METHOD OF ELECTROSTATIC ACCELERATING AND STRONG QUADRUPOLE FOCUSING OF CHARGED PARTICLES ON HIGH VOLTAGE ACCELERATORS OF DIRECT ACTION AND ITS POSSIBLE APPLICATIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP26, pp. XX-XX.
- A. Zografos et al., “Engineering Prototype for a Compact Medical Dielectric Wall Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS087, pp. 3636-3638.
- D. Song, G. Hahn, J. Ko, J. Y. Huang, S.-W. Jang, and W. Song, “A Simulation Study on Residual Gas Chamber Based Photon Beam Position Monitor”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL155, unpublished.
- T. Himel and K. A. Thompson, “Energy Measurements from Betatron Oscillations”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1529-1531.
- O. Hryhorenko, C. Z. Antoine, M. Chabot, and D. Longuevergne, “Metallographic Polishing Pathway to the Future of Large Scale SRF Facilities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 828-832.
- V. Skalyga et al., “Gasdynamic ECR Sources of Multicharged Ions”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper TUCO-A02, pp. 128-130.
- M. Brown et al., “Design of a low-power proof-of-concept multi-stage amplifier test stand to model and implement outphasing control for the LANSCE 805 MHz solid-state high-power RF amplifier”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 725-729.
- M. J. Barnes et al., “Upgrade of the LHC Injection Kicker Magnets”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA030, pp. 729-731.
- R. Hajima et al., “Generation of Laser Compton Scattered Gamma-rays from a 150-MeV Microtron”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA009, pp. 3645-3647.
- L. W. Feng et al., “Control System for DC-SRF Photo-Injector at Peking University”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 962-964.
- J. P. Duris, R. K. Li, P. Musumeci, E. W. Threlkeld, and M. T. Westfall, “High-Gradient High-Energy-Gain Inverse Free Electron Laser Experiment using a Helical Undulator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP102, pp. 289-291.
- F. Carra et al., “Ultra-High Vacuum Characterization of Molybdenum-Carbide Graphite for HL-LHC Collimators”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1078-1081.
- V. G. Dudnikov et al., “Radio Frequency Surface Plasma Source With Solenoidal Magnetic Field”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 902-905.
- C. O. Maidana, M. Jonker, and A. Latina, “Failure Studies at the Compact Linear Collider: Main Linac and Beam Delivery System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR038, pp. 4056-4058.
- W. J. M. Weterings et al., “Upgrade of the LHC Beam Dumping Protection Elements”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD081, pp. 556-558.
- C. Chang, J. Neilson, C. Pellegrini, M. Shumail, and S. G. Tantawi, “Single Electron Dynamic of Microwave Undulator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP085, pp. 753-755.
- S. Seletskiy, T. A. Miller, and P. Thieberger, “Study of YAG Exposure Time for LEReC RF Diagnostic Beamline”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 233-235.
- A. A. Garren and D. E. Johnson, “Modifications to the SSC Lattice”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 163-166.
- A. Liu, P. V. Avrakhov, C.-J. Jing, and R. A. Kostin, “pyaopt Optimization Suite and its Applications to an SRF Cavity Design for UEMs”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 229-232.
- V. G. Mudrolyubov et al., “The CC1-3 Cyclotron System. Installation and Test Results”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 182-184.
- C. Szwaj et al., “Single-Shot Electro-Optic Sampling Combined With Photonic Time-Stretch: Detailed Results at SOLEIL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 795-797.
- X. Lu et al., “Development progress of high-level applications for the HEPS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA125, pp. 4259-4261.
- E. Vogel et al., “Status of the All Superconducting Gun Cavity at DESY”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1087-1090.
- J. I. Iversen, A. Brinkmann, A. Ermakov, A. Muhs, and J. Ziegler, “Insight into DESYÔÇÖs Test Laboratory for Niobium Raw Material and Semi-finished Products”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1157-1161.
- W. J. Han, X. Liu, and B. Qin, “Design Study of a Fast Kicker Magnet Applied to the Beamline of a Proton Therapy Facility”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 110-112.
Back to search