JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A.G.Afonin, V.N.Gorlov, V.N.Gres, V.I.Terekhov, “THE FIRST EXPERIENCE WITH SPACE SCANNING EXTRACTED BEAM ON THE SPIN@U-70 SETUP TARGET: POSSIBILITY AND MEASUREMENT TOOL”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP27, pp. XX-XX. 
[n]	D. Pellegrini, A. Latina, D. Schulte, and S. A. Bogacz, “Single and Multi-bunch End-to-end Tracking in the LHeC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 459-461. doi:10.18429/JACoW-IPAC2015-MOPJE066
[n]	D. M. Dykes, “RF System Changes Associated with the SRS Upgrade”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP014L, pp. 1946-1948. 
[n]	G. Bassi, A. Blednykh, J. Choi, and V. V. Smaluk, “Decoherence due to Second Order Chromaticity in the NSLS-II Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 737-739. doi:10.18429/JACoW-IPAC2015-MOPMN016
[n]	Z. Fang et al., “LLRF Controller Upgrade for the J-PARC 400 MeV LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA046, pp. 1434-1436. 
[n]	K. Okamura et al., “SiC-JFET Switching Power Supply toward for Induction Ring Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 523-525. doi:10.18429/JACoW-IPAC2014-MOPME068
[n]	D. Xiang et al., “First Principle Measurements of Thermal Emittance for Copper and Magnesium”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN055, pp. 1049-1051. 
[n]	C. Mi et al., “A New Bipolar qtrim Power Supply System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3621-3623. doi:10.18429/JACoW-IPAC2015-WEPWI057
[n]	R. T. Dowd, Y. E. Tan, and K. P. Wootton, “Vertical Emittance at the Quantum Limit”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1096-1098. doi:10.18429/JACoW-IPAC2014-TUPRO035
[n]	R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 926-929. 
[n]	W. H. Urbanus et al., “MEQALAC, A 1 MeV Multi-Channel RF-Accelerator for Light Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 427-430. 
[n]	Z. Yang et al., “Transverse Profile Expansion and Homogenization for the Beamline of XIPAF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1346-1348. doi:10.18429/JACoW-IPAC2016-TUPMR042
[n]	A. Liu, A. D. Bross, and D. V. Neuffer, “nuSTORM Horn Optimization Study”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1562-1564. doi:10.18429/JACoW-IPAC2014-TUPRI005
[n]	S. Casalbuoni et al., “Magnetic Measurements of the 1.5 m Coils of the ANKA Superconducting Undulator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD017, pp. 3123-3125. 
[n]	G. Balik et al., “Active Vibration Isolation System for CLIC Final Focus”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1775-1777. doi:10.18429/JACoW-IPAC2014-TUPRI088
[n]	G. Chiozzi et al., “Common Software for the ALMA project”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAT005, pp. XX-XX. 
[n]	H. Higaki et al., “Mismatch Induced Oscillations of Space Charge Dominated Beams in a Uniform Focusing Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA006, pp. 1336-1338. 
[n]	M. Kuriki et al., “Development of a High Average Power Laser Generating Electron Beam in ILC Format for KEK-STF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC024, pp. 4098-4100. 
[n]	K. S. B. Li et al., “Electron Cloud Observations during LHC Operation with 25 ns Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1458-1461. doi:10.18429/JACoW-IPAC2016-TUPMW017
[n]	B. L. Qian, C. Chen, and J. Zhou, “Image-Charge Effects on the Envelope Dynamics of an Unbunched Intense Charged-Particle Beam”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG036, pp. 2966-2968. 
[n]	S. M. White, N. Carmignani, M. Dubrulle, M. Morati, and P. Raimondi, “Transparent Injection for ESRF-EBS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 78-81. doi:10.18429/JACoW-IPAC2019-MOPGW008
[n]	F. Tamura et al., “Commissioning of Beam Loading Compensation System in the J-PARC MR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA020, pp. 2540-2542. 
[n]	R. E. Rand, “A Multi-Orbit Recirculation System for a Superconducting Linear Accelerator-The Recyclotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 938-943. 
[n]	J. G. M. Kleeven, M. Abs, J. Brison, E. Forton, J. M. Hubert, and J. Walle, “Design and Simulation Tools for the High-Intensity Industrial Rhodotron Electron Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 651-654. doi:10.18429/JACoW-IPAC2018-TUYGBF4
[n]	Y. Funakoshi et al., “KEKB Performance”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT067, pp. 707-709. 
[n]	O. Delferri?¿re et al., “A Homogeneous Superconducting Combined Multipole Magnet for the Large Acceptance Spectrometer S3, based on Flat Racetrack Coils”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB024, pp. 328-330. 
[n]	M. Aiba, M. B?Âge, F. Marcellini, A. Saa Hernandez, and A. Streun, “Longitudinal Top-up Injection for Small Aperture Storage Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1842-1844. doi:10.18429/JACoW-IPAC2014-WEOAA01
[n]	A. V. Shemchuk et al., “Magnetic Measurement System For The NICA Quadrupole Magnets”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 559-562. doi:10.18429/JACoW-RUPAC2016-THPSC010
[n]	K. Jensen, D. W. Feldman, N. A. Moody, P. G. O, and J. J. Petillo, “A Theoretical Photocathode Emittance Model Including Temperature and Field Effects”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS091, pp. 1377-1379. 
[n]	A. Goldblatt, E. Bravin, F. Roncarolo, G. Trad, and T. M. Mitsuhashi, “Design and Performance of Coronagraph for Beam Halo Measurements in the LHC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 253-256. doi:10.18429/JACoW-IBIC2016-MOPG74
[n]	G. R. White et al., “Plans and Progress towards Tuning the ATF2 Final Focus System to Obtain a 35nm IP Waist”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP021, pp. 4353-4355. 
[n]	A. Liu, A. D. Bross, and J.-B. Lagrange, “A FODO Beam Line Design for nuPIL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3375-3377. doi:10.18429/JACoW-IPAC2016-THPMB055
[n]	V. Mironov, J. P. M. Beijers, S. Brandenburg, H. R. Kremers, J. Mulder, and S. Saminathan, “Operations of KVI AECRIS at AGOR Superconducting Cyclotron Facility”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-16, pp. 106-106. 
[n]	A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, and C. Mai, “Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 246-249. doi:10.18429/JACoW-FEL2019-TUP080
[n]	S. Y. Kim et al., “Longitudinal Bunch Shaping Using an X-Band Transverse Deflecting Cavity Powered by Wakefield Power Extractor at Argonne Wakefield Accelerator Facility”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1655-1658. doi:10.18429/JACoW-IPAC2022-WEOZSP1
[n]	M. Jonker et al., “The CLIC Machine Protection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB071, pp. 2860-2862. 
[n]	A. V. Aleksandrov, “SNS Beam Diagnostics: Present Status and Future Plans”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD21, pp. 95-97. 
[n]	G. Ciavola et al., “Comparison of Operations of the SERSE Ion Source at 18 and 28 GHz”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH304, pp. 2409-2411. 
[n]	Yu. A. Rogovsky, E. Perevedentsev, V. Volkov, and Yu. M. Zharinov, “The Longitudinal Distribution and Bunch Length Measurements at VEPP-2000 Collider”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 673-675. doi:10.18429/JACoW-RUPAC2016-THPSC060
[n]	G. D'Agostino, L. Calabretta, W. J. G. M, and D. Rifuggiato, “A CENTRAL REGION UPGRADE OF THE k800 SUPERCONDUCTING CYCLOTRON AT INFN-LNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1975-1978. doi:10.18429/JACoW-IPAC2019-TUPTS023
[n]	J. H. Han, H.-S. Kang, and I. S. Ko, “Status of the PAL-XFEL Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP061, pp. 1735-1737. 
[n]	M. Miski-Oglu et al., “Beam Commissioning of the Demonstrator Setup for the Superconducting  Continuous Wave HIM/GSI-Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 33-36. doi:10.18429/JACoW-IPAC2019-MOZZPLM1
[n]	J. H. Shao et al., “Systematic Benchmarking of a Planar (N)UNCD Field Emission Cathode”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2083-2086. doi:10.18429/JACoW-IPAC2019-TUPTS070
[n]	S. Wang, S. Fu, and J. Zhang, “Construction and Beam Commissioning of CSNS Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 47-51. doi:10.18429/JACoW-IPAC2016-MOZB01
[n]	D. Hernandez and B. Erdelyi, “Charge Density Estimations with Orthogonal Polynomials”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC094, pp. 355-357. 
[n]	A. Y. Zelinsky et al., “Status of NESTOR Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA063, pp. 2630-2632. 
[n]	F. Lemery, M. Dohlus, K. Fl?Âttmann, M. Ivanyan, M. Marx, and V. M. Tsakanov, “A Versatile THz Source for High-Repetition Rate XFELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 688-691. doi:10.18429/JACoW-FEL2019-THP049
[n]	R. G. Heine, K. Aulenbacher, L. M. Hein, and C. Matejcek, “Current Status of the Milliampere Booster for the Mainz Energy-recovering Superconducting Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1741-1743. doi:10.18429/JACoW-IPAC2016-TUPOW002
[n]	V. Raginel, B. Auchmann, D. Kleiven, R. Schmidt, A. P. Verweij, and D. Wollmann, “Degradation of the Insulation of the LHC Main Dipole Cable when Exposed to High Temperatures”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1186-1189. doi:10.18429/JACoW-IPAC2016-TUPMB038
[n]	U. Dorda, R. W. Assmann, K. Floettmann, B. Marchetti, Y. C. Nie, and J. Zhu, “Simulation Results of the Beam Transport of Ultra-Short Electron Bunches in Existing Beam Transfer Lines to Sinbad”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1466-1468. doi:10.18429/JACoW-IPAC2015-TUPWA028
[n]	W. Fischer et al., “First Experience with Electron Lenses for Beam-beam Compensation in RHIC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 913-917. doi:10.18429/JACoW-IPAC2014-TUYA01
[n]	S. A. Krutikhin et al., “ACCELERATING RF STATION FOR HIRFL-CSR, LANZHOU, CHINA”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUGP08, pp. XX-XX. 
[n]	P. Rosinsky et al., “Computing Architecture of the ALICE Detector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN018, pp. 134-136. 
[n]	A. M. Lombardi, E. Zh. Sargsyan, R. Scrivens, V. Coco, and J. A. Chamings, “Acceleration of Several Charge States of Lead Ion in CERN LINAC3”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP27, pp. 351-353. 
[n]	S. A. Veitzer and P. Stoltz, “Simulating Electron Cloud Evolution using Modulated Dielectric Models”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO068, pp. 1043-1045. 
[n]	A. I. Kvasha, V. L. Serov, and A. Feschenko, “Development of the INR Linear Accelerator DTL RF System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 191-195. doi:10.18429/JACoW-RUPAC2016-THXSH01
[n]	I. Mardor et al., “The SARAF CW 40 MeV Proton/Deuteron Accelerator”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOODAU04, pp. 74-80. 
[n]	V. Petrov et al., “NORMAL CONDUCTING SEPARATION DIPOLES FOR THE LHC BEAM CLEANING INSERTIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THLP10, pp. XX-XX. 
[n]	A. Streun, M. Aiba, M. B?Âge, T. Garvey, and V. Schlott, “Towards an Upgrade of the Swiss Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4358-4361. doi:10.18429/JACoW-IPAC2018-THPMK029
[n]	T. Zhang et al., “Generating Polarization Controllable FELs at Dalian Coherent Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB102, pp. 2071-2073. 
[n]	A. Chanc?® et al., “Status of the Beam Optics of the Future Hadron-Hadron Collider FCC-hh”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1470-1472. doi:10.18429/JACoW-IPAC2016-TUPMW020
[n]	R. T. Dowd, M. P. Atkinson, M. J. Boland, G. LeBlanc, Y. E. Tan, and K. Zingre, “Transverse Bunch by Bunch Feedback Operations at the Australian Synchrotron Light Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 769-772. doi:10.18429/JACoW-IPAC2015-MOPHA001
[n]	A. Marsili, R. Bruce, F. Cerutti, and S. Redaelli, “Simulations and Measurements of Physics Debris Losses at the 4 TeV LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO041, pp. 984-986. 
[n]	J. Bobbitt, “Applications of Microprocessors in Accelerators”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1065-1069. 
[n]	G. Geloni, P. Ilinski, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Method for the Determination of the Three-Dimensional Structure of Ultrashort Relativistic Electron Bunches”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC47, pp. 607-610. 
[n]	D. Horikawa et al., “Study of Electrostatic Septum by Low-Z Material for High Intensity Proton Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD052, pp. 484-486. 
[n]	R. M. Zwaska, S. C. Childress, A. I. Drozhdin, N. V. Mokhov, and I. S. Tropin, “Beam Loss Protection for a 2.3 Megawatt LBNE Proton Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD041, pp. 454-456. 
[n]	Y. Zhang et al., “SRF Cavity Transient Beam Loading Detection - Simulation and Measurement”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS080, pp. 2517-2519. 
[n]	Z. Parsa and V. Zadorozhny, “ACCELERATION AND FOCUSING AS OPTIMAL CONTROL FOR DYNAMIC SYSTEMS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP27, pp. XX-XX. 
[n]	M. Kranjcevic, A. Adelmann, P. Arbenz, S. Gorgi Zadeh, and U. van Rienen, “Constrained Multi-Objective Shape Optimization of Superconducting RF Cavities to Counteract Dangerous Higher Order Modes”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 293-296. doi:10.18429/JACoW-ICAP2018-TUPAG14
[n]	T. Yorita et al., “Study of Extraction and Transport of Intense Highly Charged Ions for 18GHz SC-ECRIS at RCNP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA031, pp. 145-147. 
[n]	A. Toyoda et al., “Recent development of a monitoring system for beam line status at the J-PARC slow-extraction beam line”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_070. 
[n]	D. Bolkhovityanov and P. B. Cheblakov, “PCI Hardware Support in LIA-2 Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN017, pp. 916-918. 
[n]	V. Zvyagintsev, R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, and Z. Y. Yao, “Coupler Design for RISP Spoke Cavity”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 372-374. doi:10.18429/JACoW-RUPAC2018-WEPSB47
[n]	N. Fukunishi et al., “Present Performance And Commissioning Details Of Ribf Accelerator Complex”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 21-23. 
[n]	G. Chlachidze et al., “Quench Performance and Field Quality of 90-mm Nb3Sn Quadrupoles of TQC Series”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD034, pp. 3581-3583. 
[n]	O. E. Gorda et al., “Status of Ion-optical Design of the Collector Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1114-1116. doi:10.18429/JACoW-IPAC2014-TUPRO041
[n]	A. Variola et al., “ERL Parameters for Compton Polarized Positron Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP068, pp. 524-526. 
[n]	C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1104-1109. 
[n]	M. G. Pullia et al., “The Experimental Beam Line at CNAO”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1334-1336. doi:10.18429/JACoW-IPAC2016-TUPMR038
[n]	S. Yamada et al., “Present Status of the HIMAC Injector (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-27, pp. 768-770. 
[n]	E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 325-327. doi:10.18429/JACoW-FEL2019-WEP004
[n]	M. Heilmann et al., “High Current Proton and Carbon Beam Operation via Stripping of a Molecular Beam at GSI UNILAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1390-1393. doi:10.18429/JACoW-IPAC2016-TUPMR057
[n]	L. Wang, H. Ikeda, K. Ohmi, K. Oide, and D. Zhou, “Validation of the Microwave Instability in the Damping Ring of SuperKEKB using VFP Solver”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME017, pp. 1604-1606. 
[n]	H. Shaker, S. Lal, H. J. Qian, G. Shu, and F. Stephan, “Beam Dynamics Optimization of a Normal-Conducting Gun Based CW Injector for the European XFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 452-455. doi:10.18429/JACoW-FEL2019-WEP054
[n]	M. Kinsho, “Status of J-PARC 3 GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP083, pp. 3927-3929. 
[n]	K. Seiya et al., “Status of Slip Stacking at Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPA004, pp. 347-349. 
[n]	F. Zimmermann et al., “Designs for a Linac-Ring LHeC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB039, pp. 1611-1613. 
[n]	P. Scharrer et al., “An Upgrade for the 1.4 MeV/u Gas Stripper at the GSI UNILAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1394-1396. doi:10.18429/JACoW-IPAC2016-TUPMR058
[n]	V. Ayvazyan, S. Choroba, Z. Geng, G. Petrosyan, S. Simrock, and V. Vogel, “Optimization of Filling Procedure for TESLA-type Cavities for Klystron RF Power Minimization of European XFEL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA039, pp. 1416-1418. 
[n]	E. Bagli, V. Guidi, and V. A. Maisheev, “ECHARM - a Software for Calculation of Physical Quantities of Interest in Coherent Interaction of Relativistic Particles with Crystals”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA070, pp. 1485-1487. 
[n]	K. Sennyu, H. Hara, F. Inoue, K. Kanaoka, and K. Okihira, “Industrialization of ILC from a View Point of Industry”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEIB203, pp. 2110-2114. 
[n]	E. Barzi et al., “The need for Nb3Sn coated Cu cavities for future accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2639-2641. doi:10.18429/JACoW-IPAC2023-WEOGC1
[n]	H. Yu et al., “Studies on Higher Order Modes Damper for the 3rd Harmonic Superconducting”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA050, pp. 2600-2602. 
[n]	D. Ondreka, H. Liebermann, and B. R. Schlei, “Optimization of the SIS18 Injector Operation for FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2088-2090. doi:10.18429/JACoW-IPAC2014-WEPRO061
[n]	W. A. H. Rogers, T. J. R. Nicholls, and A. A. Wilson, “pyAT, Pytac and pythonSoftIoc: a Pure Python Virtual Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 231. doi:10.18429/JACoW-ICALEPCS2019-MOPHA017
[n]	S. Franke et al., “Moment-Based Simulation of the S-DALINAC Recirculations”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC092, pp. 2223-2225. 
[n]	K. W. Shepard, P. N. Potukuchi, and A. Roy, “Niobium Coaxial Quarter-Wave Cavities”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-89, pp. 287-289. 
[n]	R. Leh?® and J.-L. Vay, “Review of Spectral Maxwell Solvers for Electromagnetic Particle-in-Cell: Algorithms and Advantages”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 345-349. doi:10.18429/JACoW-ICAP2018-WEPLG05
[n]	S. K. Shukla, R. Sridhar, D. P. Yadav, R. J. Patel, and A. S. Raja Rao, “Design Aspects of UHV System for INDUS-2.”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D043, pp. 779-781. 
[n]	S. Weathersby et al., “Timing of ultrafast electron and laser pulses with narrowband THz interferometry for ultrafast electron diffraction”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 607-610. doi:10.18429/JACoW-NAPAC2025-TUP099
[n]	S. M. Lewis et al., “Design of a High Gradient THz-Driven Electron Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2098-2100. doi:10.18429/JACoW-IPAC2019-TUPTS077

For LaTeX

Use Complete Form

For BibTeX

References

Back to search