Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. Song, L. Fan, X. Ge, T. Huang, J. Xing, and W. Zhang, “Copper vacuum chamber of HALF storage ring coated with NEG”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB078, unpublished.
[n] A. A. Galatis, P. Kowina, K. Lang, and A. Peters, “Digital Techniques in BPM Measurements at GSI-ISI”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH012, pp. 1019-1021.
[n] D.-J. Wang, H.-P. Chang, J.-R. Chen, J. P. Wang, and J. Wang, “Ground Vibration Measurement at NSRRC Site”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS074, pp. 3454-3456.
[n] H. Hanaki et al., “Performance Improvement of the SPring-8 Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI119, pp. 1082-1084.
[n] J. Yang et al., “Generation of Double-Decker Femtosecond Electron Beams in a Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP018, pp. 1604-1606.
[n] E. Laface, C. G. Maiano, O. Piquet, and R. Zeng, “X-Rays Energy Measurements During the RFQ Conditioning at the European Spallation Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1275-1278. doi:10.18429/JACoW-IPAC2022-TUPOTK030
[n] T. Tomimasu et al., “Operation of FIR- and UV-FEL Facilities and FEL Beam Sharing to User's Rooms at the FELI”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4B009, pp. 730-732.
[n] M. A. Rehman et al., “Observation of intra-macropulse position monitor of $\rm H^-$ beam of CSNS Linac”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6631, unpublished.
[n] H. Huang et al., “A Flying Wire System in the AGS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA107, pp. 2128-2130.
[n] A. V. Elzhov et al., “30 GHz Test Facility for Experimental Study of Accelerating Structure Damage due to the Pulse Heating”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE113, pp. 2311-2313.
[n] J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3908-3911. doi:10.18429/JACoW-IPAC2019-THPRB043
[n] O. P. Lebedev, “Decreasing Transient Beam Loading in RF Cavities of U-70 Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP02, pp. 1658-1659.
[n] M. J. W. Southerby and R. Apsimon, “Beam Dynamics Framework Incorporating Acceleration Used to Define the Minimum Aperture of RF Cavity For FODO-like Focusing Scheme for Proton Radiotherapy Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 589-592. doi:10.18429/JACoW-LINAC2022-TUPORI19
[n] B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
[n] J. T. Maniscalco, T. Arias, D. Liarte, M. Liepe, J. P. Sethna, and N. Sitaraman, “Theoretical Analysis of Quasiparticle Overheating, Positive Q-Slope, and Vortex Losses in SRF Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3020-3023. doi:10.18429/JACoW-IPAC2019-WEPRB089
[n] F. Bosco et al., “Modeling and Mitigation of Long-Range Wakefields for Advanced Linear Colliders”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2350-2353. doi:10.18429/JACoW-IPAC2022-WEPOMS045
[n] P. E. T. Jacobsson, M. Brandin, D. Ene, and T. Hansson, “Licensing and Safety Issues of the ESS Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC166, pp. 2373-2375.
[n] J. Ma, V. Litvinenko, and G. Wang, “Simulations of Coherent Electron Cooling with Orbit Deviation”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2319-2322. doi:10.18429/JACoW-IPAC2022-WEPOMS032
[n] M. G. Mazarakis et al., “Experimental Investigation of Beam Generation, Acceleration, Transport, and Extraction in the RADLAC-II Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-38, pp. 534-536.
[n] B. N. Gikal, G. G. Gulbekian, and I. A. Ivanenko, “COMPENSATION OF THE BEAM VERTICAL DEFOCUSING AT THE EXIT OF U400 CYCLOTRON SPIRAL INFLECTOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH12, pp. XX-XX.
[n] J. Wu, A. Chao, and J. R. Delayen, “Transverse Effect due to Short-range Resistive Wall Wakefield”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS085, pp. 4267-4269.
[n] A. Y. Zelinsky et al., “The Operation Modes of Kharkov X-ray Generator based on Compton Scattering NESTOR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT128, pp. 1428-1430.
[n] L. H. J. Bozyk, S. Aum??ller, and P. J. Spiller, “Investigations on Cryopanels in the Room Temperature Heavy Ion Synchrotron SIS18”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1372-1374. doi:10.18429/JACoW-IPAC2019-TUPMP054
[n] J. Bojowald, H. Borsch, W. Kuhlmann, J. Reich, and A. Retz, “A System for Emittance Measuring and Monitoring at the Jülich Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 399-407.
[n] M. S. Antony et al., “The Strasbourg Superconducting Coil Cyclotron Project”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-02, pp. 217-220.
[n] M. E. Gruchalla, P. Chacon, J. D. Gilpatrick, D. Martinez, and J. D. Sedillo, “LANSCE-R Wire-Scanner Analog Frontend Electronics (AFE)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP232, pp. 542-544.
[n] M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2655-2658.
[n] R. Schoenlein, H. Chong, T. E. Glover, P. Heimann, A. Zholents, and M. Zolotorev, “Low Signal FEL Gain: Measurement, Simulation and Analysis”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP102, pp. 2498-2500.
[n] N. I. Doinikov et al., “Application of Magnets with the Field Azimuthal Variation in Charged Particle Optics”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1309-1312.
[n] C. H. Chang et al., “Design of a High Field Strength 3.4 Tesla Wiggler for the SRRC Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP30G, pp. 2210-2212.
[n] G. J. Portmann, W. J. Corbett, and A. Terebilo, “An Accelerator Control Middle Layer Using Matlab”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT077, pp. 4009-4011.
[n] L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
[n] L. Tosi, “The High Level Software Programs: TUNE and ID-COMP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 926-929.
[n] S. Spampinati, S. Di Mitri, M. Ferianis, and M. Veronese, “Diagnostics of the Laser Heater Induced Beam Heating in FERMI@elettra”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH043, pp. 342-344.
[n] W. Busse, “Control Systems Underway to be Implemented as Expert Systems”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F4-01, pp. 236-239.
[n] S. N. Galyamin, A. V. Tyukhtin, V. V. Vorobev, A. Altmark, and S. Baturin, “Radiation of a Bunch Flying from the Open End of a Waveguide with a Dielectric Loading”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 519-521. doi:10.18429/JACoW-RUPAC2016-WEPSB069
[n] G. V. Stupakov, “Control and Application of Beam Microbunching in High Brightness Linac-driven Free Electron Lasers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2789-2793. doi:10.18429/JACoW-IPAC2014-THYA01
[n] D. Moffat, M. Bolor?®, B. Bonin, E. Jacques, and H. Safa, “Measurements of the Anomalous RF Surface Resistance of Niobium using a Dielectric Resonator”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F01, pp. 529-533.
[n] G. Penn, P. Emma, E. Hemsing, G. Marcus, T. O. Raubenheimer, and L. Wang, “Laser Seeding Schemes for Soft X-rays at LCLS-II”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP075, pp. 223-226.
[n] W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 201-204. doi:10.18429/JACoW-MEDSI2016-TUPE18
[n] T. Peterson, “Status: Large-Scale Subatmospheric Cryogenic Systems”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1769-1774.
[n] L. Campoi, B. Vasco de Paula Carlos, G. S. Ruiz Costa, L. E. Pinho Vecina, and N. Lopes Archilha, “Enhancing user experience through GUIs and helper routines at MOGNO, the micro and nano tomography beamline at SIRIUS”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1496-1502. doi:10.18429/JACoW-ICALEPCS2025-THMG011
[n] M. Yamamoto et al., “Multi-Harmonic Acceleration with High Gradient MA Cavity at HIMAC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP83, pp. 863-865.
[n] Y. Yano, A. Goto, and T. Katayama, “Overview of RIKEN RI Beam Factory Project”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper K-03, pp. 696-703.
[n] Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2216-2218. doi:10.18429/JACoW-IPAC2023-TUPM012
[n] J. Serrano et al., “The White Rabbit Project”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper THBL2, pp. 936-942.
[n] S. P. Antipov, W. Liu, J. G. Power, and L. K. Spentzouris, “Left-Handed Metamaterials Studies and their Application to Accelerator Physics”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPA005, pp. 458-460.
[n] H. Zen, T. Kii, H. Ohgaki, S. Suphakul, R. Kuroda, and Y. Taira, “Development of Photocachode Drive Laser System for RF Guns in KU-FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP045, pp. 828-831.
[n] T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
[n] F. W. Meyer et al., “Recent Activities at the ORNL Multicharged Ion Research Facility (MIRF)”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOBK04, pp. 23-25.
[n] J. E. Milburn et al., “Injection System for the PLS Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2358-2361.
[n] C. Ronsivalle, C. R. Frascati, S. Monti, C. R. Rome, L. Picardi, and F. Troiani, “Design of the Proton Beam Line for the Trade Experiment”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT062, pp. 1297-1299.
[n] H. Hahn, W. Xu, P. Jain, and E. C. Johnson, “HOM Identification and Bead Pulling on the Brookhaven ERL”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO041, pp. 810-817.
[n] G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT010, pp. 55-57.
[n] I. Miura, “The Research Center for Nuclear Physics Ring Cyclotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1650-1655.
[n] A. Aragona et al., “1 MeV Capture Section for LISA Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 529-532.
[n] J. Hill et al., “The Los Alamos VXI-Based Modular RF Control System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1154-1157.
[n] A. V. Aleksandrov et al., “Performance of a Radio-Frequency-Based Streak Camera”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA153, pp. 2948-2950.
[n] Y. Arakita et al., “The KEK Booster to Main Ring Beam Transfer System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1464-1467.
[n] R. J. Faehl, D. S. Lemons, and L. E. Thode, “Cavity Loading Associated with High-Current RF Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper D202, pp. 137-141.
[n] T. J. Russell and A. Cours, “Klystron Modulator Operation and Upgrades for the APS Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ16, pp. 1559-1560.
[n] J. Qiang, J. M. Byrd, J. Feng, and G. Huang, “Streak Camera Temporal Resolution Improvement Using a Time-Dependent Field”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS025, pp. 3973-3975.
[n] M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design Optimization of Spoke Cavity of Energy-Recovery Linac for Non-Destructive Assay Research”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO036, pp. 165-168.
[n] A. Friedman and E. Bozoki, “A Digital Feedback System for Transverse Orbit Stabilization”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1586-1589.
[n] A. L. Edelen, S. Biedron, S. V. Milton, and J. P. Edelen, “First Steps Toward Incorporating Image Based Diagnostics into Particle Accelerator Control Systems Using Convolutional Neural Networks”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 390-393. doi:10.18429/JACoW-NAPAC2016-TUPOA51
[n] M. P. Kelly, “Superconducting RF Activities at Argonne National Laboratory”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL001, pp. XX-XX.
[n] N. Hertel, S. L. Lunt, S. P. Moeller, J. S. Nielsen, and Y. Senichev, “Increasing the Life Time of SR Sources by RF Phase Modulation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23F, pp. 1339-1341.
[n] K. A. Young, G. O. Bolme, J. T. M. Lyles, D. Rees, and A. M. Velasquez, “Dissolved Gas-in-Oil Analysis to Assess the Health of the LANSCE High Voltage Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP089, pp. 1039-1041.
[n] G. Cuni, F. Becheri, D. Fernandez-Carreiras, Z. Reszela, and S. Rubio-Manrique, “Introducing the SCRUM Framework as Part of the Product Development Strategy for the ALBA Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 60-63. doi:10.18429/JACoW-ICALEPCS2015-MOD3O04
[n] I. Balossino et al., “Strain measurements of the Apple-X SABINA undulator with fiber Bragg grating”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3777-3780. doi:10.18429/JACoW-IPAC2024-THPS21
[n] L. R. Evans, A. Faugier, and R. Schmidt, “Beam Separation at the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2209-2212.
[n] B. Veglia, J. Kaiser, S. Tomin, and S. Walker, “Surrogate models for the European XFEL operation”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6156, unpublished.
[n] D. Kostin et al., “Rectangular Waveguide HOM Couplers for a TESLA Superstructure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA13, pp. 407-409.
[n] S. N Pavlov and A. V. Zhmendak, “Electron Gun for Kiev Heavy Ion Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 851-854.
[n] H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, and M. Tejima, “Optics Measurements at SuperKEKB Using Beam Based Calibration for BPM and Beam Based Experiment”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 141-145. doi:10.18429/JACoW-IBIC2017-TU3AB1
[n] Y.-C. Chae, Y. Wang, and A. Xiao, “Single-Bunch Instability Estimates for the 1-nm APS Storage Ring Upgrade with a Smaller Vacuum Chamber”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN103, pp. 4330-4332.
[n] W. H. Tan, A. Dhar, J. Hernandez, and E. Nanni, “Compressed ultrashort pulse injector demonstrator”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1623-1626. doi:10.18429/JACoW-IPAC2025-TUPS130
[n] J. T. Donohue, L. Courtois, J. Gardelle, and P. Modin, “Observation of Coherent Smith-Purcell Radiation Using an Initially Continuous Flat Beam”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC65, pp. 386-389.
[n] M. J. Spencer, G. LeBlanc, and K. Zingre, “Design and Commissioning of a Bunch by Bunch Feedback System for the Australian Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC136, pp. 3306-3308.
[n] A. S. Plastun, A. Kolomiets, and T. Tretyakova, “Transit Code for Beam Dynamic Simulation”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA07, pp. 51-53.
[n] M. M. Gordon and E. M. Fabrici, “Beam Extraction System for the K=500 Superconducting Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-13, pp. 2101-2106.
[n] Y. Sumitomo, K. Hayakawa, Y. Hayakawa, K. Nogami, T. Sakai, and T. Tanaka, “Toward THz Coherent Undulator Radiation Experiment with a Combination of Velocity Bunchings”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1663-1665. doi:10.18429/JACoW-IPAC2021-TUPAB116
[n] R. W. Castor and J. Abraham, “Performance Characteristics of the Zero Gradient Synchrotron Linac Automatic Gradient Stabilizer”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-07, pp. 78-82.
[n] H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1312-1315.
[n] T. W. Hardek et al., “The Spallation Neutron Source Accumulator Ring RF System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROAC01, pp. 3795-3797.
[n] D. Stratakis, Z. Pavlovic, J. M. Grange, S-C. Kim, R. Miceli, and J. A. Zennamo, “Fermilab Muon Campus as a Potential Probe to Study Neutrino Physics”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 749-751. doi:10.18429/JACoW-NAPAC2016-WEPOA26
[n] M. Clift, B. W. Karnaghan, W. K. Lewis, A. C. Starritt, and R. I. Farnsworth, “Outsourcing, Insourcing, and Integration of Control Systems in the Australian Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAA02, pp. 276-280.
[n] K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
[n] K. Kostro, R. Billen, and C. Roderick, “On-change Publishing of Database Resident Control System Data”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP013, pp. 120-122.
[n] G. Marcus, W. M. Fawley, S. Reiche, E. Schneidmiller, and M. V. Yurkov, “FEL Code Comparison for the Production of Harmonics via Harmonic Lasing”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP031, pp. 451-455.
[n] C. J. Marshall, S. V. Benson, J. Gubeli, P. Piot, and J. Ruan, “Design and Analysis of a Halo-Measurement Diagnostics”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 322-325. doi:10.18429/JACoW-NAPAC2019-TUYBB5
[n] F.-J. Decker et al., “Towards Achieving the Design Number of Bunches in PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B11, pp. 403-405.
[n] J. G. Alessi and K. Prelec, “Isotope and Cs Vapor Effects in an H- Volume Source with a Toroidal Chamber”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 656-659.
[n] J. Wei et al., “Compact Pulsed Hadron Source - A University-Based Accelerator Platform for Multidisciplinary Neutron and Proton Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP035, pp. 1360-1362.
[n] G. Tosin, R. Basilio, J. F. Citadini, and M. Potye, “EPU Assembly Based on Sub-cassettes Magnetic Characterization”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH132, pp. 3107-3109.
[n] N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
[n] P. N. Alekseev, “Study of Possibility of Industrial Application of Ion Injector I-3”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB26, pp. 217-219.
[n] Z. Greenwald and D. L. Rubin, “Emittance Growth Study Using 3DE Code for the ERL Injector Cavities with Various Coupler Configurations”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB011, pp. 2056-2058.
[n] F. Hinder, H. Soltner, F. Trinkel, and H.-J. Krause, “Development of New Beam Position Monitors at COSY”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 339-343. doi:10.18429/JACoW-IBIC2015-TUPB015
[n] B. Parker et al., “The Superconducting Magnets of the ILC Beam Delivery System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS091, pp. 3196-3198.
[n] A. V. Savilov and I. V. Bandurkin, “THz Photo-Injector FEM Based on Spontaneous Coherent Emission from a Bunch of Negative-Mass Electrons”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 317-320. doi:10.18429/JACoW-FEL2015-TUP001
[n] Y. Hirao, “NUMATRON Project”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3736-3739.
[n] H.-S. Kang et al., “Intense THz Radiation Generation from a Compact Electron Linac”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC75, pp. 413-415.
[n] J. Lorkiewicz et al., “Characteristics of TiN Anti-multipactor Layers Reached By Titanium Vapor Deposition on Alumina Coupler Windows”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP31, pp. 697-699.
[n] C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428.
[n] S. Boogert and L. Nevay, “Python FLUKA BeamLine (pyflubl) : Upgrades and developments”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5135, unpublished.
[n] B. Gao, H. J. Chen, J. Chen, Y. B. Leng, and K. R. Ye, “Beam Size Monitor Based on Multi-Silt Interferometer at SSRF”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 408-410. doi:10.18429/JACoW-IBIC2017-WEPCC21
[n] W. C. Barkley, C. E. Buechler, and E. N. Pulliam, “Assessing the Continued Suitability of an Existing Water System for an Accelerator Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3673-3676. doi:10.18429/JACoW-IPAC2018-THPAL023
[n] K. Villafania, M. Kelly, P. Piot, S.-H. Kim, T. Xu, and T. Petersen, “X-ray measurements in a prototype superconducting radiofrequency electron gun for LCLS-II-HE project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2717-2719. doi:10.18429/JACoW-IPAC2024-WEPS11
[n] A. Nassiri, J. Carwardine, N. D. Arnold, T. Smith, A. E. Grelick, and N. Dimonte, “A High-Resolution S-band Down-Converting Digital Phase Detector for SASE FEL Use”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP48, pp. 715-717.
[n] R. M. Zwaska, B. C. Brown, I. Kourbanis, A. Marchionni, and E. Prebys, “Beam Loss at the Fermilab Booster and Main Injector: Recent Experience and the Road to MW Class Beams”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAZ02, pp. XX-XX.
[n] T. Kanayawa, S. Koseki, H. Kubo, and M. Kumada, “High Performance Active Filter for the Power Supply of the HIMAC Synchrotron Magnet”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP100G, pp. 2358-2360.
[n] L. Yin et al., “Electron Dynamics of the Rod-Pinch Diode in the Cygnus Experiment at Los Alamos”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT025, pp. 1901-1903.
[n] B. Krasch, F. Abusaif, A. Grau, N. Glamann, R. Nast, and D. Saez de Jauregui, “Design study of a compact superconducting undulator based on laser-structured HTS tapes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3781-3784. doi:10.18429/JACoW-IPAC2024-THPS22
[n] J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 778-783.
[n] V. I. Maslov, I. P. Levchuk, and I. N. Onishchenko, “Self-focusing and Wakefield-focusing of Relativistic Electron Bunches in Plasma”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2602-2604. doi:10.18429/JACoW-IPAC2016-WEPMY023
[n] J. C. Collins, J. R. Graham, and Wm. Manwaring, “The IUCF Cooler Ring Control System”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F4-03, pp. 244-247.
[n] A. Fukasawa et al., “Beam Dynamics and RF Cavity Design of a Standing/Traveling-Wave Hybrid Photoinjector for High Brightness Beam Generation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP056, pp. 4434-4436.
[n] M. Katoh, S. Sato, S. Suzuki, and T. Yamakawa, “Lattice Design of a Synchrotron Radiation Source at Tohoku University”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP065G, pp. 653-655.
For LaTeX
Use Complete Form
For BibTeX
References
- X. Song, L. Fan, X. Ge, T. Huang, J. Xing, and W. Zhang, “Copper vacuum chamber of HALF storage ring coated with NEG”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB078, unpublished.
- A. A. Galatis, P. Kowina, K. Lang, and A. Peters, “Digital Techniques in BPM Measurements at GSI-ISI”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH012, pp. 1019-1021.
- D.-J. Wang, H.-P. Chang, J.-R. Chen, J. P. Wang, and J. Wang, “Ground Vibration Measurement at NSRRC Site”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS074, pp. 3454-3456.
- H. Hanaki et al., “Performance Improvement of the SPring-8 Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI119, pp. 1082-1084.
- J. Yang et al., “Generation of Double-Decker Femtosecond Electron Beams in a Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP018, pp. 1604-1606.
- E. Laface, C. G. Maiano, O. Piquet, and R. Zeng, “X-Rays Energy Measurements During the RFQ Conditioning at the European Spallation Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1275-1278.
- T. Tomimasu et al., “Operation of FIR- and UV-FEL Facilities and FEL Beam Sharing to User's Rooms at the FELI”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4B009, pp. 730-732.
- M. A. Rehman et al., “Observation of intra-macropulse position monitor of $\rm H^-$ beam of CSNS Linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6631, this conference.
- H. Huang et al., “A Flying Wire System in the AGS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA107, pp. 2128-2130.
- A. V. Elzhov et al., “30 GHz Test Facility for Experimental Study of Accelerating Structure Damage due to the Pulse Heating”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE113, pp. 2311-2313.
- J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3908-3911.
- O. P. Lebedev, “Decreasing Transient Beam Loading in RF Cavities of U-70 Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP02, pp. 1658-1659.
- M. J. W. Southerby and R. Apsimon, “Beam Dynamics Framework Incorporating Acceleration Used to Define the Minimum Aperture of RF Cavity For FODO-like Focusing Scheme for Proton Radiotherapy Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 589-592.
- B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
- J. T. Maniscalco, T. Arias, D. Liarte, M. Liepe, J. P. Sethna, and N. Sitaraman, “Theoretical Analysis of Quasiparticle Overheating, Positive Q-Slope, and Vortex Losses in SRF Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3020-3023.
- F. Bosco et al., “Modeling and Mitigation of Long-Range Wakefields for Advanced Linear Colliders”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2350-2353.
- P. E. T. Jacobsson, M. Brandin, D. Ene, and T. Hansson, “Licensing and Safety Issues of the ESS Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC166, pp. 2373-2375.
- J. Ma, V. Litvinenko, and G. Wang, “Simulations of Coherent Electron Cooling with Orbit Deviation”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2319-2322.
- M. G. Mazarakis et al., “Experimental Investigation of Beam Generation, Acceleration, Transport, and Extraction in the RADLAC-II Pulsed Transmission Line Linear Accelerator”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-38, pp. 534-536.
- B. N. Gikal, G. G. Gulbekian, and I. A. Ivanenko, “COMPENSATION OF THE BEAM VERTICAL DEFOCUSING AT THE EXIT OF U400 CYCLOTRON SPIRAL INFLECTOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH12, pp. XX-XX.
- J. Wu, A. Chao, and J. R. Delayen, “Transverse Effect due to Short-range Resistive Wall Wakefield”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS085, pp. 4267-4269.
- A. Y. Zelinsky et al., “The Operation Modes of Kharkov X-ray Generator based on Compton Scattering NESTOR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT128, pp. 1428-1430.
- L. H. J. Bozyk, S. Aum??ller, and P. J. Spiller, “Investigations on Cryopanels in the Room Temperature Heavy Ion Synchrotron SIS18”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1372-1374.
- J. Bojowald, H. Borsch, W. Kuhlmann, J. Reich, and A. Retz, “A System for Emittance Measuring and Monitoring at the Jülich Isochronous Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 399-407.
- M. S. Antony et al., “The Strasbourg Superconducting Coil Cyclotron Project”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CP-02, pp. 217-220.
- M. E. Gruchalla, P. Chacon, J. D. Gilpatrick, D. Martinez, and J. D. Sedillo, “LANSCE-R Wire-Scanner Analog Frontend Electronics (AFE)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP232, pp. 542-544.
- M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2655-2658.
- R. Schoenlein, H. Chong, T. E. Glover, P. Heimann, A. Zholents, and M. Zolotorev, “Low Signal FEL Gain: Measurement, Simulation and Analysis”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP102, pp. 2498-2500.
- N. I. Doinikov et al., “Application of Magnets with the Field Azimuthal Variation in Charged Particle Optics”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1309-1312.
- C. H. Chang et al., “Design of a High Field Strength 3.4 Tesla Wiggler for the SRRC Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP30G, pp. 2210-2212.
- G. J. Portmann, W. J. Corbett, and A. Terebilo, “An Accelerator Control Middle Layer Using Matlab”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT077, pp. 4009-4011.
- L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
- L. Tosi, “The High Level Software Programs: TUNE and ID-COMP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 926-929.
- S. Spampinati, S. Di Mitri, M. Ferianis, and M. Veronese, “Diagnostics of the Laser Heater Induced Beam Heating in FERMI@elettra”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH043, pp. 342-344.
- W. Busse, “Control Systems Underway to be Implemented as Expert Systems”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F4-01, pp. 236-239.
- S. N. Galyamin, A. V. Tyukhtin, V. V. Vorobev, A. Altmark, and S. Baturin, “Radiation of a Bunch Flying from the Open End of a Waveguide with a Dielectric Loading”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 519-521.
- G. V. Stupakov, “Control and Application of Beam Microbunching in High Brightness Linac-driven Free Electron Lasers”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2789-2793.
- D. Moffat, M. Bolor?®, B. Bonin, E. Jacques, and H. Safa, “Measurements of the Anomalous RF Surface Resistance of Niobium using a Dielectric Resonator”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F01, pp. 529-533.
- G. Penn, P. Emma, E. Hemsing, G. Marcus, T. O. Raubenheimer, and L. Wang, “Laser Seeding Schemes for Soft X-rays at LCLS-II”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP075, pp. 223-226.
- W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 201-204.
- T. Peterson, “Status: Large-Scale Subatmospheric Cryogenic Systems”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1769-1774.
- L. Campoi, B. Vasco de Paula Carlos, G. S. Ruiz Costa, L. E. Pinho Vecina, and N. Lopes Archilha, “Enhancing user experience through GUIs and helper routines at MOGNO, the micro and nano tomography beamline at SIRIUS”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1496-1502.
- M. Yamamoto et al., “Multi-Harmonic Acceleration with High Gradient MA Cavity at HIMAC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP83, pp. 863-865.
- Y. Yano, A. Goto, and T. Katayama, “Overview of RIKEN RI Beam Factory Project”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper K-03, pp. 696-703.
- Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM012, pp. 2216-2218.
- J. Serrano et al., “The White Rabbit Project”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper THBL2, pp. 936-942.
- S. P. Antipov, W. Liu, J. G. Power, and L. K. Spentzouris, “Left-Handed Metamaterials Studies and their Application to Accelerator Physics”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPA005, pp. 458-460.
- H. Zen, T. Kii, H. Ohgaki, S. Suphakul, R. Kuroda, and Y. Taira, “Development of Photocachode Drive Laser System for RF Guns in KU-FEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP045, pp. 828-831.
- T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
- F. W. Meyer et al., “Recent Activities at the ORNL Multicharged Ion Research Facility (MIRF)”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOBK04, pp. 23-25.
- J. E. Milburn et al., “Injection System for the PLS Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2358-2361.
- C. Ronsivalle, C. R. Frascati, S. Monti, C. R. Rome, L. Picardi, and F. Troiani, “Design of the Proton Beam Line for the Trade Experiment”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT062, pp. 1297-1299.
- H. Hahn, W. Xu, P. Jain, and E. C. Johnson, “HOM Identification and Bead Pulling on the Brookhaven ERL”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO041, pp. 810-817.
- G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT010, pp. 55-57.
- I. Miura, “The Research Center for Nuclear Physics Ring Cyclotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1650-1655.
- A. Aragona et al., “1 MeV Capture Section for LISA Injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 529-532.
- J. Hill et al., “The Los Alamos VXI-Based Modular RF Control System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1154-1157.
- A. V. Aleksandrov et al., “Performance of a Radio-Frequency-Based Streak Camera”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA153, pp. 2948-2950.
- Y. Arakita et al., “The KEK Booster to Main Ring Beam Transfer System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1464-1467.
- R. J. Faehl, D. S. Lemons, and L. E. Thode, “Cavity Loading Associated with High-Current RF Linacs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper D202, pp. 137-141.
- T. J. Russell and A. Cours, “Klystron Modulator Operation and Upgrades for the APS Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ16, pp. 1559-1560.
- J. Qiang, J. M. Byrd, J. Feng, and G. Huang, “Streak Camera Temporal Resolution Improvement Using a Time-Dependent Field”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS025, pp. 3973-3975.
- M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design Optimization of Spoke Cavity of Energy-Recovery Linac for Non-Destructive Assay Research”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO036, pp. 165-168.
- A. Friedman and E. Bozoki, “A Digital Feedback System for Transverse Orbit Stabilization”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1586-1589.
- A. L. Edelen, S. Biedron, S. V. Milton, and J. P. Edelen, “First Steps Toward Incorporating Image Based Diagnostics into Particle Accelerator Control Systems Using Convolutional Neural Networks”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 390-393.
- M. P. Kelly, “Superconducting RF Activities at Argonne National Laboratory”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL001, pp. XX-XX.
- N. Hertel, S. L. Lunt, S. P. Moeller, J. S. Nielsen, and Y. Senichev, “Increasing the Life Time of SR Sources by RF Phase Modulation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP23F, pp. 1339-1341.
- K. A. Young, G. O. Bolme, J. T. M. Lyles, D. Rees, and A. M. Velasquez, “Dissolved Gas-in-Oil Analysis to Assess the Health of the LANSCE High Voltage Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP089, pp. 1039-1041.
- G. Cuni, F. Becheri, D. Fernandez-Carreiras, Z. Reszela, and S. Rubio-Manrique, “Introducing the SCRUM Framework as Part of the Product Development Strategy for the ALBA Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 60-63.
- I. Balossino et al., “Strain measurements of the Apple-X SABINA undulator with fiber Bragg grating”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS21, pp. 3777-3780.
- L. R. Evans, A. Faugier, and R. Schmidt, “Beam Separation at the CERN SPS Collider”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2209-2212.
- B. Veglia, J. Kaiser, S. Tomin, and S. Walker, “Surrogate models for the European XFEL operation”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6156, this conference.
- D. Kostin et al., “Rectangular Waveguide HOM Couplers for a TESLA Superstructure”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA13, pp. 407-409.
- S. N Pavlov and A. V. Zhmendak, “Electron Gun for Kiev Heavy Ion Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 851-854.
- H. Sugimoto, H. Koiso, A. Morita, Y. Ohnishi, and M. Tejima, “Optics Measurements at SuperKEKB Using Beam Based Calibration for BPM and Beam Based Experiment”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 141-145.
- Y.-C. Chae, Y. Wang, and A. Xiao, “Single-Bunch Instability Estimates for the 1-nm APS Storage Ring Upgrade with a Smaller Vacuum Chamber”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN103, pp. 4330-4332.
- W. H. Tan, A. Dhar, J. Hernandez, and E. Nanni, “Compressed ultrashort pulse injector demonstrator”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS130, pp. 1623-1626.
- J. T. Donohue, L. Courtois, J. Gardelle, and P. Modin, “Observation of Coherent Smith-Purcell Radiation Using an Initially Continuous Flat Beam”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC65, pp. 386-389.
- M. J. Spencer, G. LeBlanc, and K. Zingre, “Design and Commissioning of a Bunch by Bunch Feedback System for the Australian Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC136, pp. 3306-3308.
- A. S. Plastun, A. Kolomiets, and T. Tretyakova, “Transit Code for Beam Dynamic Simulation”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA07, pp. 51-53.
- M. M. Gordon and E. M. Fabrici, “Beam Extraction System for the K=500 Superconducting Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-13, pp. 2101-2106.
- Y. Sumitomo, K. Hayakawa, Y. Hayakawa, K. Nogami, T. Sakai, and T. Tanaka, “Toward THz Coherent Undulator Radiation Experiment with a Combination of Velocity Bunchings”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1663-1665.
- R. W. Castor and J. Abraham, “Performance Characteristics of the Zero Gradient Synchrotron Linac Automatic Gradient Stabilizer”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-07, pp. 78-82.
- H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1312-1315.
- T. W. Hardek et al., “The Spallation Neutron Source Accumulator Ring RF System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROAC01, pp. 3795-3797.
- D. Stratakis, Z. Pavlovic, J. M. Grange, S-C. Kim, R. Miceli, and J. A. Zennamo, “Fermilab Muon Campus as a Potential Probe to Study Neutrino Physics”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 749-751.
- M. Clift, B. W. Karnaghan, W. K. Lewis, A. C. Starritt, and R. I. Farnsworth, “Outsourcing, Insourcing, and Integration of Control Systems in the Australian Synchrotron”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOAA02, pp. 276-280.
- K. Zagar, L. R. Dalesio, M. R. Kraimer, and M. Sekoranja, “Evolution of the EPICS Channel Access Protocol”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOD005, pp. 40-42.
- K. Kostro, R. Billen, and C. Roderick, “On-change Publishing of Database Resident Control System Data”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP013, pp. 120-122.
- G. Marcus, W. M. Fawley, S. Reiche, E. Schneidmiller, and M. V. Yurkov, “FEL Code Comparison for the Production of Harmonics via Harmonic Lasing”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP031, pp. 451-455.
- C. J. Marshall, S. V. Benson, J. Gubeli, P. Piot, and J. Ruan, “Design and Analysis of a Halo-Measurement Diagnostics”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 322-325.
- F.-J. Decker et al., “Towards Achieving the Design Number of Bunches in PEP-II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B11, pp. 403-405.
- J. G. Alessi and K. Prelec, “Isotope and Cs Vapor Effects in an H- Volume Source with a Toroidal Chamber”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 656-659.
- J. Wei et al., “Compact Pulsed Hadron Source - A University-Based Accelerator Platform for Multidisciplinary Neutron and Proton Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP035, pp. 1360-1362.
- G. Tosin, R. Basilio, J. F. Citadini, and M. Potye, “EPU Assembly Based on Sub-cassettes Magnetic Characterization”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH132, pp. 3107-3109.
- N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
- P. N. Alekseev, “Study of Possibility of Industrial Application of Ion Injector I-3”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB26, pp. 217-219.
- Z. Greenwald and D. L. Rubin, “Emittance Growth Study Using 3DE Code for the ERL Injector Cavities with Various Coupler Configurations”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB011, pp. 2056-2058.
- F. Hinder, H. Soltner, F. Trinkel, and H.-J. Krause, “Development of New Beam Position Monitors at COSY”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 339-343.
- B. Parker et al., “The Superconducting Magnets of the ILC Beam Delivery System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS091, pp. 3196-3198.
- A. V. Savilov and I. V. Bandurkin, “THz Photo-Injector FEM Based on Spontaneous Coherent Emission from a Bunch of Negative-Mass Electrons”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 317-320.
- Y. Hirao, “NUMATRON Project”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3736-3739.
- H.-S. Kang et al., “Intense THz Radiation Generation from a Compact Electron Linac”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC75, pp. 413-415.
- J. Lorkiewicz et al., “Characteristics of TiN Anti-multipactor Layers Reached By Titanium Vapor Deposition on Alumina Coupler Windows”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP31, pp. 697-699.
- C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428.
- S. Boogert and L. Nevay, “Python FLUKA BeamLine (pyflubl) : Upgrades and developments”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5135, this conference.
- B. Gao, H. J. Chen, J. Chen, Y. B. Leng, and K. R. Ye, “Beam Size Monitor Based on Multi-Silt Interferometer at SSRF”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 408-410.
- W. C. Barkley, C. E. Buechler, and E. N. Pulliam, “Assessing the Continued Suitability of an Existing Water System for an Accelerator Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3673-3676.
- K. Villafania, M. Kelly, P. Piot, S.-H. Kim, T. Xu, and T. Petersen, “X-ray measurements in a prototype superconducting radiofrequency electron gun for LCLS-II-HE project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS11, pp. 2717-2719.
- A. Nassiri, J. Carwardine, N. D. Arnold, T. Smith, A. E. Grelick, and N. Dimonte, “A High-Resolution S-band Down-Converting Digital Phase Detector for SASE FEL Use”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP48, pp. 715-717.
- R. M. Zwaska, B. C. Brown, I. Kourbanis, A. Marchionni, and E. Prebys, “Beam Loss at the Fermilab Booster and Main Injector: Recent Experience and the Road to MW Class Beams”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAZ02, pp. XX-XX.
- T. Kanayawa, S. Koseki, H. Kubo, and M. Kumada, “High Performance Active Filter for the Power Supply of the HIMAC Synchrotron Magnet”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP100G, pp. 2358-2360.
- L. Yin et al., “Electron Dynamics of the Rod-Pinch Diode in the Cygnus Experiment at Los Alamos”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT025, pp. 1901-1903.
- B. Krasch, F. Abusaif, A. Grau, N. Glamann, R. Nast, and D. Saez de Jauregui, “Design study of a compact superconducting undulator based on laser-structured HTS tapes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS22, pp. 3781-3784.
- J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 778-783.
- V. I. Maslov, I. P. Levchuk, and I. N. Onishchenko, “Self-focusing and Wakefield-focusing of Relativistic Electron Bunches in Plasma”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2602-2604.
- J. C. Collins, J. R. Graham, and Wm. Manwaring, “The IUCF Cooler Ring Control System”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F4-03, pp. 244-247.
- A. Fukasawa et al., “Beam Dynamics and RF Cavity Design of a Standing/Traveling-Wave Hybrid Photoinjector for High Brightness Beam Generation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP056, pp. 4434-4436.
- M. Katoh, S. Sato, S. Suzuki, and T. Yamakawa, “Lattice Design of a Synchrotron Radiation Source at Tohoku University”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP065G, pp. 653-655.
Back to search