Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. Song, L. Fan, X. Ge, T. Huang, J. Xing, and W. Zhang, “Copper vacuum chamber of HALF storage ring coated with NEG”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB078, unpublished.
[n] A. A. Galatis, P. Kowina, K. Lang, and A. Peters, “Digital Techniques in BPM Measurements at GSI-ISI”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH012, pp. 1019-1021.
[n] D.-J. Wang, H.-P. Chang, J.-R. Chen, J. P. Wang, and J. Wang, “Ground Vibration Measurement at NSRRC Site”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS074, pp. 3454-3456.
[n] H. Hanaki et al., “Performance Improvement of the SPring-8 Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI119, pp. 1082-1084.
[n] J. Yang et al., “Generation of Double-Decker Femtosecond Electron Beams in a Photoinjector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP018, pp. 1604-1606.
[n] E. Laface, C. G. Maiano, O. Piquet, and R. Zeng, “X-Rays Energy Measurements During the RFQ Conditioning at the European Spallation Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1275-1278. doi:10.18429/JACoW-IPAC2022-TUPOTK030
[n] T. Tomimasu et al., “Operation of FIR- and UV-FEL Facilities and FEL Beam Sharing to User's Rooms at the FELI”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4B009, pp. 730-732.
[n] M. A. Rehman et al., “Observation of intra-macropulse position monitor of $\rm H^-$ beam of CSNS Linac”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6631, unpublished.
[n] H. Huang et al., “A Flying Wire System in the AGS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA107, pp. 2128-2130.
[n] A. V. Elzhov et al., “30 GHz Test Facility for Experimental Study of Accelerating Structure Damage due to the Pulse Heating”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE113, pp. 2311-2313.
[n] J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3908-3911. doi:10.18429/JACoW-IPAC2019-THPRB043
[n] O. P. Lebedev, “Decreasing Transient Beam Loading in RF Cavities of U-70 Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP02, pp. 1658-1659.
[n] M. J. W. Southerby and R. Apsimon, “Beam Dynamics Framework Incorporating Acceleration Used to Define the Minimum Aperture of RF Cavity For FODO-like Focusing Scheme for Proton Radiotherapy Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 589-592. doi:10.18429/JACoW-LINAC2022-TUPORI19
[n] B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
[n] J. T. Maniscalco, T. Arias, D. Liarte, M. Liepe, J. P. Sethna, and N. Sitaraman, “Theoretical Analysis of Quasiparticle Overheating, Positive Q-Slope, and Vortex Losses in SRF Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3020-3023. doi:10.18429/JACoW-IPAC2019-WEPRB089
[n] F. Bosco et al., “Modeling and Mitigation of Long-Range Wakefields for Advanced Linear Colliders”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2350-2353. doi:10.18429/JACoW-IPAC2022-WEPOMS045
[n] P. E. T. Jacobsson, M. Brandin, D. Ene, and T. Hansson, “Licensing and Safety Issues of the ESS Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC166, pp. 2373-2375.
[n] J. Ma, V. Litvinenko, and G. Wang, “Simulations of Coherent Electron Cooling with Orbit Deviation”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2319-2322. doi:10.18429/JACoW-IPAC2022-WEPOMS032
[n] M. G. Mazarakis et al., “Experimental Investigation of Beam Generation, Acceleration, Transport, and Extraction in the RADLAC-II Pulsed Transmission Line Linear Accelerator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-38, pp. 534-536.
[n] B. N. Gikal, G. G. Gulbekian, and I. A. Ivanenko, “COMPENSATION OF THE BEAM VERTICAL DEFOCUSING AT THE EXIT OF U400 CYCLOTRON SPIRAL INFLECTOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH12, pp. XX-XX.
[n] J. Wu, A. Chao, and J. R. Delayen, “Transverse Effect due to Short-range Resistive Wall Wakefield”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS085, pp. 4267-4269.
[n] A. Y. Zelinsky et al., “The Operation Modes of Kharkov X-ray Generator based on Compton Scattering NESTOR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT128, pp. 1428-1430.
[n] L. H. J. Bozyk, S. Aum??ller, and P. J. Spiller, “Investigations on Cryopanels in the Room Temperature Heavy Ion Synchrotron SIS18”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1372-1374. doi:10.18429/JACoW-IPAC2019-TUPMP054
[n] J. Bojowald, H. Borsch, W. Kuhlmann, J. Reich, and A. Retz, “A System for Emittance Measuring and Monitoring at the Jülich Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 399-407.
[n] M. S. Antony et al., “The Strasbourg Superconducting Coil Cyclotron Project”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-02, pp. 217-220.
[n] M. E. Gruchalla, P. Chacon, J. D. Gilpatrick, D. Martinez, and J. D. Sedillo, “LANSCE-R Wire-Scanner Analog Frontend Electronics (AFE)”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP232, pp. 542-544.
[n] M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2655-2658.
[n] R. Schoenlein, H. Chong, T. E. Glover, P. Heimann, A. Zholents, and M. Zolotorev, “Low Signal FEL Gain: Measurement, Simulation and Analysis”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP102, pp. 2498-2500.
[n] N. I. Doinikov et al., “Application of Magnets with the Field Azimuthal Variation in Charged Particle Optics”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1309-1312.
[n] C. H. Chang et al., “Design of a High Field Strength 3.4 Tesla Wiggler for the SRRC Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP30G, pp. 2210-2212.
[n] G. J. Portmann, W. J. Corbett, and A. Terebilo, “An Accelerator Control Middle Layer Using Matlab”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT077, pp. 4009-4011.
[n] L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
[n] L. Tosi, “The High Level Software Programs: TUNE and ID-COMP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 926-929.
[n] S. Spampinati, S. Di Mitri, M. Ferianis, and M. Veronese, “Diagnostics of the Laser Heater Induced Beam Heating in FERMI@elettra”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH043, pp. 342-344.
[n] W. Busse, “Control Systems Underway to be Implemented as Expert Systems”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F4-01, pp. 236-239.
[n] S. N. Galyamin, A. V. Tyukhtin, V. V. Vorobev, A. Altmark, and S. Baturin, “Radiation of a Bunch Flying from the Open End of a Waveguide with a Dielectric Loading”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 519-521. doi:10.18429/JACoW-RUPAC2016-WEPSB069
[n] G. V. Stupakov, “Control and Application of Beam Microbunching in High Brightness Linac-driven Free Electron Lasers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2789-2793. doi:10.18429/JACoW-IPAC2014-THYA01
[n] D. Moffat, M. Bolor?®, B. Bonin, E. Jacques, and H. Safa, “Measurements of the Anomalous RF Surface Resistance of Niobium using a Dielectric Resonator”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F01, pp. 529-533.
[n] G. Penn, P. Emma, E. Hemsing, G. Marcus, T. O. Raubenheimer, and L. Wang, “Laser Seeding Schemes for Soft X-rays at LCLS-II”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP075, pp. 223-226.
[n] W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 201-204. doi:10.18429/JACoW-MEDSI2016-TUPE18
[n] T. Peterson, “Status: Large-Scale Subatmospheric Cryogenic Systems”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1769-1774.
[n] L. Campoi, B. Vasco de Paula Carlos, G. S. Ruiz Costa, L. E. Pinho Vecina, and N. Lopes Archilha, “Enhancing user experience through GUIs and helper routines at MOGNO, the micro and nano tomography beamline at SIRIUS”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1496-1502. doi:10.18429/JACoW-ICALEPCS2025-THMG011
[n] M. Yamamoto et al., “Multi-Harmonic Acceleration with High Gradient MA Cavity at HIMAC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP83, pp. 863-865.
[n] Y. Yano, A. Goto, and T. Katayama, “Overview of RIKEN RI Beam Factory Project”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper K-03, pp. 696-703.
[n] Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2216-2218. doi:10.18429/JACoW-IPAC2023-TUPM012
[n] J. Serrano et al., “The White Rabbit Project”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper THBL2, pp. 936-942.
[n] S. P. Antipov, W. Liu, J. G. Power, and L. K. Spentzouris, “Left-Handed Metamaterials Studies and their Application to Accelerator Physics”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPA005, pp. 458-460.
[n] H. Zen, T. Kii, H. Ohgaki, S. Suphakul, R. Kuroda, and Y. Taira, “Development of Photocachode Drive Laser System for RF Guns in KU-FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP045, pp. 828-831.
[n] T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
[n] F. W. Meyer et al., “Recent Activities at the ORNL Multicharged Ion Research Facility (MIRF)”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOBK04, pp. 23-25.
[n] J. E. Milburn et al., “Injection System for the PLS Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2358-2361.
[n] C. Ronsivalle, C. R. Frascati, S. Monti, C. R. Rome, L. Picardi, and F. Troiani, “Design of the Proton Beam Line for the Trade Experiment”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT062, pp. 1297-1299.
[n] H. Hahn, W. Xu, P. Jain, and E. C. Johnson, “HOM Identification and Bead Pulling on the Brookhaven ERL”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO041, pp. 810-817.
[n] G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT010, pp. 55-57.
[n] I. Miura, “The Research Center for Nuclear Physics Ring Cyclotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1650-1655.
[n] A. Aragona et al., “1 MeV Capture Section for LISA Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 529-532.
[n] J. Hill et al., “The Los Alamos VXI-Based Modular RF Control System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1154-1157.
[n] A. V. Aleksandrov et al., “Performance of a Radio-Frequency-Based Streak Camera”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA153, pp. 2948-2950.
[n] Y. Arakita et al., “The KEK Booster to Main Ring Beam Transfer System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1464-1467.
[n] R. J. Faehl, D. S. Lemons, and L. E. Thode, “Cavity Loading Associated with High-Current RF Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper D202, pp. 137-141.
[n] T. J. Russell and A. Cours, “Klystron Modulator Operation and Upgrades for the APS Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ16, pp. 1559-1560.
[n] J. Qiang, J. M. Byrd, J. Feng, and G. Huang, “Streak Camera Temporal Resolution Improvement Using a Time-Dependent Field”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS025, pp. 3973-3975.
[n] M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design Optimization of Spoke Cavity of Energy-Recovery Linac for Non-Destructive Assay Research”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO036, pp. 165-168.
For LaTeX
Use Complete Form
For BibTeX
References
- X. Song, L. Fan, X. Ge, T. Huang, J. Xing, and W. Zhang, “Copper vacuum chamber of HALF storage ring coated with NEG”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB078, unpublished.
- A. A. Galatis, P. Kowina, K. Lang, and A. Peters, “Digital Techniques in BPM Measurements at GSI-ISI”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH012, pp. 1019-1021.
- D.-J. Wang, H.-P. Chang, J.-R. Chen, J. P. Wang, and J. Wang, “Ground Vibration Measurement at NSRRC Site”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS074, pp. 3454-3456.
- H. Hanaki et al., “Performance Improvement of the SPring-8 Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI119, pp. 1082-1084.
- J. Yang et al., “Generation of Double-Decker Femtosecond Electron Beams in a Photoinjector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP018, pp. 1604-1606.
- E. Laface, C. G. Maiano, O. Piquet, and R. Zeng, “X-Rays Energy Measurements During the RFQ Conditioning at the European Spallation Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1275-1278.
- T. Tomimasu et al., “Operation of FIR- and UV-FEL Facilities and FEL Beam Sharing to User's Rooms at the FELI”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4B009, pp. 730-732.
- M. A. Rehman et al., “Observation of intra-macropulse position monitor of $\rm H^-$ beam of CSNS Linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6631, this conference.
- H. Huang et al., “A Flying Wire System in the AGS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA107, pp. 2128-2130.
- A. V. Elzhov et al., “30 GHz Test Facility for Experimental Study of Accelerating Structure Damage due to the Pulse Heating”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE113, pp. 2311-2313.
- J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3908-3911.
- O. P. Lebedev, “Decreasing Transient Beam Loading in RF Cavities of U-70 Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP02, pp. 1658-1659.
- M. J. W. Southerby and R. Apsimon, “Beam Dynamics Framework Incorporating Acceleration Used to Define the Minimum Aperture of RF Cavity For FODO-like Focusing Scheme for Proton Radiotherapy Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 589-592.
- B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
- J. T. Maniscalco, T. Arias, D. Liarte, M. Liepe, J. P. Sethna, and N. Sitaraman, “Theoretical Analysis of Quasiparticle Overheating, Positive Q-Slope, and Vortex Losses in SRF Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3020-3023.
- F. Bosco et al., “Modeling and Mitigation of Long-Range Wakefields for Advanced Linear Colliders”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2350-2353.
- P. E. T. Jacobsson, M. Brandin, D. Ene, and T. Hansson, “Licensing and Safety Issues of the ESS Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC166, pp. 2373-2375.
- J. Ma, V. Litvinenko, and G. Wang, “Simulations of Coherent Electron Cooling with Orbit Deviation”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2319-2322.
- M. G. Mazarakis et al., “Experimental Investigation of Beam Generation, Acceleration, Transport, and Extraction in the RADLAC-II Pulsed Transmission Line Linear Accelerator”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-38, pp. 534-536.
- B. N. Gikal, G. G. Gulbekian, and I. A. Ivanenko, “COMPENSATION OF THE BEAM VERTICAL DEFOCUSING AT THE EXIT OF U400 CYCLOTRON SPIRAL INFLECTOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH12, pp. XX-XX.
- J. Wu, A. Chao, and J. R. Delayen, “Transverse Effect due to Short-range Resistive Wall Wakefield”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS085, pp. 4267-4269.
- A. Y. Zelinsky et al., “The Operation Modes of Kharkov X-ray Generator based on Compton Scattering NESTOR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT128, pp. 1428-1430.
- L. H. J. Bozyk, S. Aum??ller, and P. J. Spiller, “Investigations on Cryopanels in the Room Temperature Heavy Ion Synchrotron SIS18”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1372-1374.
- J. Bojowald, H. Borsch, W. Kuhlmann, J. Reich, and A. Retz, “A System for Emittance Measuring and Monitoring at the Jülich Isochronous Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 399-407.
- M. S. Antony et al., “The Strasbourg Superconducting Coil Cyclotron Project”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CP-02, pp. 217-220.
- M. E. Gruchalla, P. Chacon, J. D. Gilpatrick, D. Martinez, and J. D. Sedillo, “LANSCE-R Wire-Scanner Analog Frontend Electronics (AFE)”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP232, pp. 542-544.
- M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2655-2658.
- R. Schoenlein, H. Chong, T. E. Glover, P. Heimann, A. Zholents, and M. Zolotorev, “Low Signal FEL Gain: Measurement, Simulation and Analysis”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP102, pp. 2498-2500.
- N. I. Doinikov et al., “Application of Magnets with the Field Azimuthal Variation in Charged Particle Optics”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1309-1312.
- C. H. Chang et al., “Design of a High Field Strength 3.4 Tesla Wiggler for the SRRC Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP30G, pp. 2210-2212.
- G. J. Portmann, W. J. Corbett, and A. Terebilo, “An Accelerator Control Middle Layer Using Matlab”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT077, pp. 4009-4011.
- L. J. Allen, A. J. Lennox, and C. W. Schmidt, “Operational Experience with the Fermilab Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-16, pp. 82-84.
- L. Tosi, “The High Level Software Programs: TUNE and ID-COMP”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 926-929.
- S. Spampinati, S. Di Mitri, M. Ferianis, and M. Veronese, “Diagnostics of the Laser Heater Induced Beam Heating in FERMI@elettra”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH043, pp. 342-344.
- W. Busse, “Control Systems Underway to be Implemented as Expert Systems”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F4-01, pp. 236-239.
- S. N. Galyamin, A. V. Tyukhtin, V. V. Vorobev, A. Altmark, and S. Baturin, “Radiation of a Bunch Flying from the Open End of a Waveguide with a Dielectric Loading”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 519-521.
- G. V. Stupakov, “Control and Application of Beam Microbunching in High Brightness Linac-driven Free Electron Lasers”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2789-2793.
- D. Moffat, M. Bolor?®, B. Bonin, E. Jacques, and H. Safa, “Measurements of the Anomalous RF Surface Resistance of Niobium using a Dielectric Resonator”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F01, pp. 529-533.
- G. Penn, P. Emma, E. Hemsing, G. Marcus, T. O. Raubenheimer, and L. Wang, “Laser Seeding Schemes for Soft X-rays at LCLS-II”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP075, pp. 223-226.
- W. Tizzano, “Design and FEA of a 3D Printed Detector Window Frame”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 201-204.
- T. Peterson, “Status: Large-Scale Subatmospheric Cryogenic Systems”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1769-1774.
- L. Campoi, B. Vasco de Paula Carlos, G. S. Ruiz Costa, L. E. Pinho Vecina, and N. Lopes Archilha, “Enhancing user experience through GUIs and helper routines at MOGNO, the micro and nano tomography beamline at SIRIUS”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1496-1502.
- M. Yamamoto et al., “Multi-Harmonic Acceleration with High Gradient MA Cavity at HIMAC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP83, pp. 863-865.
- Y. Yano, A. Goto, and T. Katayama, “Overview of RIKEN RI Beam Factory Project”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper K-03, pp. 696-703.
- Y. Batygin, E. Guardincerri, D. Tupa, and S. Wender, “High-energy beamline for delivering H- laser stripped proton beam to LANSCE experimental area”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM012, pp. 2216-2218.
- J. Serrano et al., “The White Rabbit Project”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper THBL2, pp. 936-942.
- S. P. Antipov, W. Liu, J. G. Power, and L. K. Spentzouris, “Left-Handed Metamaterials Studies and their Application to Accelerator Physics”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPA005, pp. 458-460.
- H. Zen, T. Kii, H. Ohgaki, S. Suphakul, R. Kuroda, and Y. Taira, “Development of Photocachode Drive Laser System for RF Guns in KU-FEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP045, pp. 828-831.
- T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
- F. W. Meyer et al., “Recent Activities at the ORNL Multicharged Ion Research Facility (MIRF)”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOBK04, pp. 23-25.
- J. E. Milburn et al., “Injection System for the PLS Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2358-2361.
- C. Ronsivalle, C. R. Frascati, S. Monti, C. R. Rome, L. Picardi, and F. Troiani, “Design of the Proton Beam Line for the Trade Experiment”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT062, pp. 1297-1299.
- H. Hahn, W. Xu, P. Jain, and E. C. Johnson, “HOM Identification and Bead Pulling on the Brookhaven ERL”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO041, pp. 810-817.
- G. Tabacaru, J. Arje, and D. P. May, “The Light Ion Guide CB-ECRIS Project at the Texas A&M University Cyclotron Institute”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT010, pp. 55-57.
- I. Miura, “The Research Center for Nuclear Physics Ring Cyclotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1650-1655.
- A. Aragona et al., “1 MeV Capture Section for LISA Injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 529-532.
- J. Hill et al., “The Los Alamos VXI-Based Modular RF Control System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1154-1157.
- A. V. Aleksandrov et al., “Performance of a Radio-Frequency-Based Streak Camera”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA153, pp. 2948-2950.
- Y. Arakita et al., “The KEK Booster to Main Ring Beam Transfer System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1464-1467.
- R. J. Faehl, D. S. Lemons, and L. E. Thode, “Cavity Loading Associated with High-Current RF Linacs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper D202, pp. 137-141.
- T. J. Russell and A. Cours, “Klystron Modulator Operation and Upgrades for the APS Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ16, pp. 1559-1560.
- J. Qiang, J. M. Byrd, J. Feng, and G. Huang, “Streak Camera Temporal Resolution Improvement Using a Time-Dependent Field”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS025, pp. 3973-3975.
- M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design Optimization of Spoke Cavity of Energy-Recovery Linac for Non-Destructive Assay Research”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO036, pp. 165-168.
Back to search