Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME032, pp. 2992-2994.
[n] S. S. Kurennoy, “Beam Position-Phase Monitors for SNS Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC11, pp. 172-174.
[n] M. M. Musardo et al., “NSLS-II Magnetic Measurement System Facility”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC15, pp. 1172-1174.
[n] Q.-Sh. Shu, G. Cheng, and J. Susta, “Five Projects of High RF Power Input Couplers and Windows for SRF Accelerators”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP34, pp. 706-710.
[n] F. Meot, H. Huang, Y. Luo, V. H. Ranjbar, G. Robert-Demolaize, and S. M. White, “Polarization Simulations in the RHIC Run 15 Lattice”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2372-2374. doi:10.18429/JACoW-IPAC2015-TUPWI053
[n] S. Nath, R. W. Garnett, G. R. Swain, and T. P. Wangler, “Beam Dynamics Design of a Pion Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU414, pp. 338-340.
[n] N. B. Mistry and R. Kersevan, “Massive Titanium Sublimation Pumping in the CESR Interaction Region”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C006, pp. 3559-3561.
[n] A. Gorski, R. Wright, C. Pitts, and S. Sharma, “Design and Construction of Septum Magnets at the 7-GeV APS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP160, pp. 3342-3344.
[n] S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
[n] J. A. Clarke et al., “Status of CLARA, a New FEL Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 49-53. doi:10.18429/JACoW-FEL2015-MOP011
[n] J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 1989-1994.
[n] A. Akiyama et al., “Slow Ground Motion and Large Future Accelerator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP072G, pp. 2600-2602.
[n] M. A. Preger et al., “Performance and Operation of the DAFNE Accumulator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP44G, pp. 415-417.
[n] V. Yakimenko et al., “FACET-II Accelerator Research with Beams of Extreme Intensities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1067-1070. doi:10.18429/JACoW-IPAC2016-TUOBB02
[n] S. Ackermann, B. Faatz, V. Miltchev, and J. Rossbach, “Optimization of HHG Seeding at Flash II”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD11, pp. 249-252.
[n] A. G. Shkvarunets, M. E. Conde, R. B. Fiorito, W. Gai, P. G. O, and J. G. Power, “Optical Diffraction-Dielectric Foil Radiation Interferometry Diagnostic for Low Energy Electron Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS034, pp. 4012-4014.
[n] J. R. Aggus, D. Edwards, H. J. Halama, and J. C. Herrera, “Characteristics of the ISABELLE Vacuum System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1287-1290.
[n] L. Dovlatyan, T. M. Antonsen, B. L. Beaudoin, I. Haber, D. B. Matthew, and K. J. Ruisard, “Preliminary Lattice Studies for the Single-Invariant Optics Experiment at the University of Maryland”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 367-370. doi:10.18429/JACoW-IPAC2019-MOPGW105
[n] C. F. Papadopoulos et al., “Injector Design Studies for NGLS”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO69, pp. 391-394.
[n] P. Kneisel, D. Mansen, G. Mueller, H. Piel, J. Pouryamout, and R. Roeth, “Nb3Sn Layers on High-Purity Nb Cavities with Very High Quality Factors and Accelerating Gradients”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP002L, pp. 2085-2087.
[n] N. G. Reshetnyak et al., “Investigation on the Electron Beam Formation in the Magnetron Gun with a Secondary-Emission Cathode Using the Masgnetic System Based on Permanent Magnets”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC011, pp. 349-351.
[n] M. M. Shehab and G. Vignola, “Mechanical Design Considerations for Sesame Main Subsystems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN047, pp. 263-265.
[n] L. Serafini, A. Bacci, and M. Ferrario, “Ultra-Short Electron Bunch Generation with a Rectilinear Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH064, pp. 2242-2244.
[n] L. R. Glasgow and J. M. Haughian, “Shielding Doors”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 712-718.
[n] C. H. Yi, M.-H. Cho, S. H. Kim, H. Lee, and W. Namkung, “Design and Machine Features of 2.2-m C-band Accelerating Structure”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC035, pp. 148-150.
[n] Y. T. Oganessian et al., “Status Report of the U400 Cyclotron at the FLNR JINR”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10001, pp. XX-XX.
[n] M. J. Hogan et al., “Road to a Plasma Wakefield Accelerator Based Linear Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1GRI01, pp. 646-646.
[n] G. Stancari, V. Moens, and S. Redaelli, “Beam Dynamics in an Electron Lens with the Warp Particle-in-cell Code”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 451-453. doi:10.18429/JACoW-IPAC2014-MOPME033
[n] J. L. Sun et al., “Status of the Beam Instrumentation System of CSNS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 95-97. doi:10.18429/JACoW-HB2016-MOPR017
[n] M. Sassowsky et al., “Steel Septum Magnets for the LHC Beam Injection and Extraction”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE083, pp. 2514-2516.
[n] A. Wagner, “International Collaboration with High Energy Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOXAMH01, pp. XX-XX.
[n] Y. Yamaguchi and Y. Abe, “The Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1C03, pp. 121-123.
[n] B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47.
[n] A. D. Cahill, J. B. Rosenzweig, V. A. Dolgashev, S. G. Tantawi, and S. P. Weathersby, “Ultra High Gradient Breakdown Rates in X-Band Cryogenic Normal Conducting Rf Accelerating Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4395-4398. doi:10.18429/JACoW-IPAC2017-THPIK125
[n] T. Wamsat, N. Baboi, B. Lorbeer, and P. Zhang, “Performance of a Downconverter Test-electronics with MTCA-based Digitizers for Beam Position Monitoring in 3.9 GHz Accelerating Cavities”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA23, pp. 386-389.
[n] C. M. Ginsburg, “Fermilab 1.3 GHz Superconducting RF Cavity and Cryomodule Program for Future Linacs”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB06, pp. 153-155.
[n] J. A. Clarke, “A Review of Optical Diagnostics Techniques for Beam Profile Measurements”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1643-1646.
[n] R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255.
[n] D. Fernandez-Carreiras, “Status of the Alba Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP090, pp. 287-289.
[n] E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 22-25. doi:10.18429/JACoW-ICALEPCS2015-MOC3O02
[n] D. R. Copenhagen, E. A. Knapp, and J. M. Potter, “Operating Characteristics of a Full Power Cloverleaf Accelerator Tank”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-10, pp. 137-139.
[n] S. A. Melnikov and I. N. Meshkov, “Stability of Charged Particle Motion in a Storage Ring With Focusing by a Longitudinal Magnetic Field”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 158-160. doi:10.18429/JACoW-RUPAC2018-TUPSA08
[n] G. Riddone, T. O. Niinikoski, F. Rossi, R. J. Raatikainen, K. ?ûsterberg, and A. Samoshkin, “Improved Modelling of the Thermo-mechanical Behavior of the CLIC Two-Beam Module”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR033, pp. 1891-1893.
[n] S. Kakiuchi, M. Maezawa, and Y. Ito, “An Ion Synchrotron for Multi-Purposes Use of Energy Research Center, Wakasa Bay”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D048, pp. 790-792.
[n] M. A. C. Cummings and D. Hedin, “Low Beta Region Muon Collider Detector Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP048, pp. 2601-2603.
[n] P. H. Rose and H. Milde, “Transients in Large Tandem Accelerators”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 63-68.
[n] C. Montag et al., “RHIC Polarized Proton Performance in Run-8”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP019, pp. 2566-2568.
[n] S. Sethi, C. Welsch, H. Zhang, and O. Stringer, “Study of pulsed jet operation for beam gas curtain monitors”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 354-358. doi:10.18429/JACoW-IBIC2025-TUPCO06
[n] K. H. Hu, J. Chen, C. J. Wang, S. Y. Hsu, C. H. Kuo, and K. T. Hsu, “Applications of the Log-Ratio BPM in NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16048, pp. XX-XX.
[n] H. R. Schneider et al., “A 30 MeV H- Cyclotron for Isotope Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1623-1626.
[n] Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
[n] B. Parker et al., “Fast Track Actively Shielded Nb3Sn IR Quadrupole R&D”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2398-2400. doi:10.18429/JACoW-IPAC2018-WEPMF014
[n] D. Horan and E. Cherbak, “Fast Ferrite Tuner Operation on a 352-MHz Single-Cell RF Cavity at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB001, pp. 1177-1179.
[n] Y. Ohnishi, Y. Funakoshi, H. Koiso, A. Morita, K. Oide, and H. Sugimoto, “Optics Correction and Low Emittance Tuning at the Phase 1 commissioning of SuperKEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 143-146. doi:10.18429/JACoW-eeFACT2016-TUT3BH2
[n] G. B. Bai, “An Arc-Discharge Ion Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 279-283.
[n] B. Singh, R. Bartolini, R. T. Fielder, E. C. Longhi, and I. P. S. Martin, “Commissioning and Investigation of Beam Dynamics of Phase I Insertion Devices at Diamond”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN088, pp. 1118-1120.
[n] R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1344-1347.
[n] J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
[n] J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
[n] Di Maio F., Charrue P., Cuperus J., Deloose I., Kostro K., Vanden Eynden M., Watson W., “The CERN PS/SL Controls Java Application Programming Interface”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WD1O03, pp. XX-XX.
[n] A. V. Aleksandrov, S. M. Cousineau, A. P. Zhukov, and B. L. Cathey, “6D Beam Measurement, Challenges and Possibilities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2890-2895. doi:10.18429/JACoW-IPAC2018-THXGBE1
[n] B. Laun?®, “The Diagnostics System for the SPIRAL R.I.B. Facility”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-07, pp. 194-197.
[n] J. C. Cornell, A. H. Botha, J. L. Conradie, D. T. Fourie, A. M??ller, and H. A. Smit, “New Beamlines for Proton Therapy at NAC”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-33, pp. 133-136.
[n] K. Lang, P. Forck, T. Hoffmann, G. Jan?ía, P. Kowina, and U. Rauch, “Performance Tests of Digital Signal Processing for GSI Synchrotron BPMs”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP002, pp. 79-81.
[n] W. Feng, E. B. Forsyth, and G. C. Pappas, “Electric and Magnetic Design of the G-2 Magnetic Kicker”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D075, pp. 585-587.
[n] V. Wu, C. M. Bhat, B. Chase, J. E. Dey, and K. G. Meisner, “Experimental Test of a New Antiproton Acceleration Scheme in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE012, pp. 1303-1305.
[n] N. Delerue et al., “Longitudinal Profile Monitor Using Smith-Purcell Radiation: Recent Results from the E-203 Collaboration”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC38, pp. 464-466.
[n] S. Prestemon et al., “Design and Evaluation of a Short Period Nb3Sn Superconducting Undulator Prototype”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG010, pp. 1032-1034.
[n] F. Cioeta et al., “Spot Size Measurements in the ELI-NP Compton Gamma Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 532-535. doi:10.18429/JACoW-IBIC2016-TUPG74
[n] C. De Martinis and D. Giove, “High Voltage Tests of a Prototype Electrostatic Deflector for the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper N03, pp. 575-578.
[n] O. Kamigaito, “Rare-Isotope Beam Facilities in Asia”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOB05, pp. 28-32.
[n] M. Krishnan and I. Irfan, “Energetic Condensation Growth of Niobium Films”, in Proc. SRF'13, Paris, France, Sep. 2013, paper WEIOA02, pp. 761-766.
[n] V. G. Kurakin et al., “Automation of the Lebedev Physical Institute Synchrotron to the Energy 1.3 GeV as the First Stage of the Accelerator Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH303, pp. 2778-2780.
[n] T. Tajima et al., “Development of HOM Absorber for KEK B-Factory SC Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I39, pp. XX-XX.
[n] A. Blackett-May et al., “Upgrades to the Daresbury Laboratory Vertical Test Facility and testing of PIP-II HB650 cavities”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 152-157. doi:10.18429/JACoW-SRF2025-MOP41
[n] F. L. Maciariello et al., “High Intensity Beam Test of Low Z Materials for the Upgrade of SPS-to-LHC Transfer Line Collimators and LHC Injection Absorbers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1218-1221. doi:10.18429/JACoW-IPAC2016-TUPMB052
[n] M. P. Bourgarel et al., “First Results of the 14.5 GHz GANIL ECR Source with the C. W. and the Pulsed Operation Mode”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 645-647.
[n] C. K. Allen and M. Reiser, “Review of Image Effects on Particle Beams in Cylindrical Pipes”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V015, pp. 1526-1528.
[n] A. Alekou et al., “SPS Studies in Preparation for the Crab Cavity Experiment”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2133-2135. doi:10.18429/JACoW-IPAC2017-TUPVA034
[n] K. Nakayama et al., “Beam Dynamic Behaviour of the Injector Synchrotron in the 8 geV Synchrotron Radiation Facility (SPring-8)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1530-1533.
[n] V. A. Kalinin, V. T. Baranov, G. V. Khitev, and O. P. Lebedev, “Experimental Study of the Transverse Beam Size Used a Fast Wire Scanner in the U70 at IHEP”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 480-482. doi:10.18429/JACoW-RUPAC2018-THPSC36
[n] E. Chiadroni et al., “High Energy Emittance Measurement at SPARC”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD44, pp. 402-404.
[n] L. Li et al., “Field Measurement of the Quadrupole Magnet for CSNS/RCS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1265-1267. doi:10.18429/JACoW-IPAC2014-TUPRO096
[n] C. M. Warsop et al., “High Intensity Loss Mechanisms on the ISIS Rapid Cycling Synchrotron”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3LR03, pp. 203-207.
[n] V. Ivanov et al., “Reverse Emittance Exchange for Muon Colliders”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP093, pp. 2721-2723.
[n] W. Decking, “Accelerator Layout and Physics of X-Ray Free-Electron Lasers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUOB002, pp. XX-XX.
[n] F. Wang et al., “Progress of the eRHIC Electron Ring Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT148, pp. 887-889.
[n] M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n] B. P. Wang, Y. B. Leng, Y. B. Yan, L. Y. Yu, R. X. Yuan, and W. M. Zhou, “Development of Cavity Beam Position Monitor System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME051, pp. 586-588.
[n] M. Lonza et al., “Implementation and Operation of the Elettra Booster Control System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP009, pp. 1544-1546.
[n] L. Giannessi and C. R. Frascati, “SPARC Operation in Seeded and Chirped Mode”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOOAI4, pp. 4-11.
[n] R. Nagaoka et al., “Design Considerations of a 7BA-6BA Lattice for the Future Upgrade of SOLEIL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2815-2817. doi:10.18429/JACoW-IPAC2016-WEPOW003
[n] S. Marletta, E. G. Messina, L. Celona, F. Chines, G. Ciavola, and S. Gammino, “Ionization Efficiency Measurements with The Microwave Discharge Ion Source MIDAS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B06, pp. 1601-1603.
[n] P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
[n] A. Kanareykin, S. P. Antipov, J. E. Butler, C.-J. Jing, W. Gai, and V. Yakimenko, “Advances in Beam Tests of Dielectric Based Accelerating Structures”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB03, pp. 144-146.
[n] S. Wang et al., “Assembly, alignment and tuning of the XiPAF DTL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1284-1287. doi:10.18429/JACoW-IPAC2023-MOPM138
[n] K. Fan, S. Fukuoka, H. Matsumoto, T. Sugimoto, and T. Toyama, “Coupling Impedance Study of the New Injection Kicker Magnets of the JPARC Main Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP003, pp. 3725-3727.
[n] B. Yasatekin, O. Cakir, G. Turemen, E. Celebi, and G. Unel, “DEMIRCI: An RFQ Design Software”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 81-83. doi:10.18429/JACoW-ICAP2015-WEP10
For LaTeX
Use Complete Form
For BibTeX
References
- M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME032, pp. 2992-2994.
- S. S. Kurennoy, “Beam Position-Phase Monitors for SNS Linac”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC11, pp. 172-174.
- M. M. Musardo et al., “NSLS-II Magnetic Measurement System Facility”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC15, pp. 1172-1174.
- Q.-Sh. Shu, G. Cheng, and J. Susta, “Five Projects of High RF Power Input Couplers and Windows for SRF Accelerators”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP34, pp. 706-710.
- F. Meot, H. Huang, Y. Luo, V. H. Ranjbar, G. Robert-Demolaize, and S. M. White, “Polarization Simulations in the RHIC Run 15 Lattice”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2372-2374.
- S. Nath, R. W. Garnett, G. R. Swain, and T. P. Wangler, “Beam Dynamics Design of a Pion Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU414, pp. 338-340.
- N. B. Mistry and R. Kersevan, “Massive Titanium Sublimation Pumping in the CESR Interaction Region”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C006, pp. 3559-3561.
- A. Gorski, R. Wright, C. Pitts, and S. Sharma, “Design and Construction of Septum Magnets at the 7-GeV APS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP160, pp. 3342-3344.
- S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
- J. A. Clarke et al., “Status of CLARA, a New FEL Test Facility”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 49-53.
- J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 1989-1994.
- A. Akiyama et al., “Slow Ground Motion and Large Future Accelerator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP072G, pp. 2600-2602.
- M. A. Preger et al., “Performance and Operation of the DAFNE Accumulator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP44G, pp. 415-417.
- V. Yakimenko et al., “FACET-II Accelerator Research with Beams of Extreme Intensities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1067-1070.
- S. Ackermann, B. Faatz, V. Miltchev, and J. Rossbach, “Optimization of HHG Seeding at Flash II”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD11, pp. 249-252.
- A. G. Shkvarunets, M. E. Conde, R. B. Fiorito, W. Gai, P. G. O, and J. G. Power, “Optical Diffraction-Dielectric Foil Radiation Interferometry Diagnostic for Low Energy Electron Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS034, pp. 4012-4014.
- J. R. Aggus, D. Edwards, H. J. Halama, and J. C. Herrera, “Characteristics of the ISABELLE Vacuum System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1287-1290.
- L. Dovlatyan, T. M. Antonsen, B. L. Beaudoin, I. Haber, D. B. Matthew, and K. J. Ruisard, “Preliminary Lattice Studies for the Single-Invariant Optics Experiment at the University of Maryland”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 367-370.
- C. F. Papadopoulos et al., “Injector Design Studies for NGLS”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO69, pp. 391-394.
- P. Kneisel, D. Mansen, G. Mueller, H. Piel, J. Pouryamout, and R. Roeth, “Nb3Sn Layers on High-Purity Nb Cavities with Very High Quality Factors and Accelerating Gradients”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP002L, pp. 2085-2087.
- N. G. Reshetnyak et al., “Investigation on the Electron Beam Formation in the Magnetron Gun with a Secondary-Emission Cathode Using the Masgnetic System Based on Permanent Magnets”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC011, pp. 349-351.
- M. M. Shehab and G. Vignola, “Mechanical Design Considerations for Sesame Main Subsystems”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN047, pp. 263-265.
- L. Serafini, A. Bacci, and M. Ferrario, “Ultra-Short Electron Bunch Generation with a Rectilinear Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH064, pp. 2242-2244.
- L. R. Glasgow and J. M. Haughian, “Shielding Doors”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 712-718.
- C. H. Yi, M.-H. Cho, S. H. Kim, H. Lee, and W. Namkung, “Design and Machine Features of 2.2-m C-band Accelerating Structure”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC035, pp. 148-150.
- Y. T. Oganessian et al., “Status Report of the U400 Cyclotron at the FLNR JINR”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10001, pp. XX-XX.
- M. J. Hogan et al., “Road to a Plasma Wakefield Accelerator Based Linear Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU1GRI01, pp. 646-646.
- G. Stancari, V. Moens, and S. Redaelli, “Beam Dynamics in an Electron Lens with the Warp Particle-in-cell Code”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 451-453.
- J. L. Sun et al., “Status of the Beam Instrumentation System of CSNS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 95-97.
- M. Sassowsky et al., “Steel Septum Magnets for the LHC Beam Injection and Extraction”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE083, pp. 2514-2516.
- A. Wagner, “International Collaboration with High Energy Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOXAMH01, pp. XX-XX.
- Y. Yamaguchi and Y. Abe, “The Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUM1C03, pp. 121-123.
- B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47.
- A. D. Cahill, J. B. Rosenzweig, V. A. Dolgashev, S. G. Tantawi, and S. P. Weathersby, “Ultra High Gradient Breakdown Rates in X-Band Cryogenic Normal Conducting Rf Accelerating Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4395-4398.
- T. Wamsat, N. Baboi, B. Lorbeer, and P. Zhang, “Performance of a Downconverter Test-electronics with MTCA-based Digitizers for Beam Position Monitoring in 3.9 GHz Accelerating Cavities”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA23, pp. 386-389.
- C. M. Ginsburg, “Fermilab 1.3 GHz Superconducting RF Cavity and Cryomodule Program for Future Linacs”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPLB06, pp. 153-155.
- J. A. Clarke, “A Review of Optical Diagnostics Techniques for Beam Profile Measurements”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1643-1646.
- R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255.
- D. Fernandez-Carreiras, “Status of the Alba Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP090, pp. 287-289.
- E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 22-25.
- D. R. Copenhagen, E. A. Knapp, and J. M. Potter, “Operating Characteristics of a Full Power Cloverleaf Accelerator Tank”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-10, pp. 137-139.
- S. A. Melnikov and I. N. Meshkov, “Stability of Charged Particle Motion in a Storage Ring With Focusing by a Longitudinal Magnetic Field”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 158-160.
- G. Riddone, T. O. Niinikoski, F. Rossi, R. J. Raatikainen, K. ?ûsterberg, and A. Samoshkin, “Improved Modelling of the Thermo-mechanical Behavior of the CLIC Two-Beam Module”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR033, pp. 1891-1893.
- S. Kakiuchi, M. Maezawa, and Y. Ito, “An Ion Synchrotron for Multi-Purposes Use of Energy Research Center, Wakasa Bay”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D048, pp. 790-792.
- M. A. C. Cummings and D. Hedin, “Low Beta Region Muon Collider Detector Design”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP048, pp. 2601-2603.
- P. H. Rose and H. Milde, “Transients in Large Tandem Accelerators”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 63-68.
- C. Montag et al., “RHIC Polarized Proton Performance in Run-8”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP019, pp. 2566-2568.
- S. Sethi, C. Welsch, H. Zhang, and O. Stringer, “Study of pulsed jet operation for beam gas curtain monitors”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 354-358.
- K. H. Hu, J. Chen, C. J. Wang, S. Y. Hsu, C. H. Kuo, and K. T. Hsu, “Applications of the Log-Ratio BPM in NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16048, pp. XX-XX.
- H. R. Schneider et al., “A 30 MeV H- Cyclotron for Isotope Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1623-1626.
- Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
- B. Parker et al., “Fast Track Actively Shielded Nb3Sn IR Quadrupole R&D”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2398-2400.
- D. Horan and E. Cherbak, “Fast Ferrite Tuner Operation on a 352-MHz Single-Cell RF Cavity at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB001, pp. 1177-1179.
- Y. Ohnishi, Y. Funakoshi, H. Koiso, A. Morita, K. Oide, and H. Sugimoto, “Optics Correction and Low Emittance Tuning at the Phase 1 commissioning of SuperKEKB”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 143-146.
- G. B. Bai, “An Arc-Discharge Ion Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 279-283.
- B. Singh, R. Bartolini, R. T. Fielder, E. C. Longhi, and I. P. S. Martin, “Commissioning and Investigation of Beam Dynamics of Phase I Insertion Devices at Diamond”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN088, pp. 1118-1120.
- R. Thomas, D. J. Ciardullo, and W. Van Zwienen, “Design and Testing of the AGS Booster BPM Detector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1344-1347.
- J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
- J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
- Di Maio F., Charrue P., Cuperus J., Deloose I., Kostro K., Vanden Eynden M., Watson W., “The CERN PS/SL Controls Java Application Programming Interface”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WD1O03, pp. XX-XX.
- A. V. Aleksandrov, S. M. Cousineau, A. P. Zhukov, and B. L. Cathey, “6D Beam Measurement, Challenges and Possibilities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2890-2895.
- B. Laun?®, “The Diagnostics System for the SPIRAL R.I.B. Facility”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-07, pp. 194-197.
- J. C. Cornell, A. H. Botha, J. L. Conradie, D. T. Fourie, A. M??ller, and H. A. Smit, “New Beamlines for Proton Therapy at NAC”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-33, pp. 133-136.
- K. Lang, P. Forck, T. Hoffmann, G. Jan?ía, P. Kowina, and U. Rauch, “Performance Tests of Digital Signal Processing for GSI Synchrotron BPMs”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP002, pp. 79-81.
- W. Feng, E. B. Forsyth, and G. C. Pappas, “Electric and Magnetic Design of the G-2 Magnetic Kicker”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D075, pp. 585-587.
- V. Wu, C. M. Bhat, B. Chase, J. E. Dey, and K. G. Meisner, “Experimental Test of a New Antiproton Acceleration Scheme in the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE012, pp. 1303-1305.
- N. Delerue et al., “Longitudinal Profile Monitor Using Smith-Purcell Radiation: Recent Results from the E-203 Collaboration”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC38, pp. 464-466.
- S. Prestemon et al., “Design and Evaluation of a Short Period Nb3Sn Superconducting Undulator Prototype”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG010, pp. 1032-1034.
- F. Cioeta et al., “Spot Size Measurements in the ELI-NP Compton Gamma Source”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 532-535.
- C. De Martinis and D. Giove, “High Voltage Tests of a Prototype Electrostatic Deflector for the Milan Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper N03, pp. 575-578.
- O. Kamigaito, “Rare-Isotope Beam Facilities in Asia”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOB05, pp. 28-32.
- M. Krishnan and I. Irfan, “Energetic Condensation Growth of Niobium Films”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper WEIOA02, pp. 761-766.
- V. G. Kurakin et al., “Automation of the Lebedev Physical Institute Synchrotron to the Energy 1.3 GeV as the First Stage of the Accelerator Upgrade”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH303, pp. 2778-2780.
- T. Tajima et al., “Development of HOM Absorber for KEK B-Factory SC Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I39, pp. XX-XX.
- A. Blackett-May et al., “Upgrades to the Daresbury Laboratory Vertical Test Facility and testing of PIP-II HB650 cavities”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 152-157.
- F. L. Maciariello et al., “High Intensity Beam Test of Low Z Materials for the Upgrade of SPS-to-LHC Transfer Line Collimators and LHC Injection Absorbers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1218-1221.
- M. P. Bourgarel et al., “First Results of the 14.5 GHz GANIL ECR Source with the C. W. and the Pulsed Operation Mode”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 645-647.
- C. K. Allen and M. Reiser, “Review of Image Effects on Particle Beams in Cylindrical Pipes”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V015, pp. 1526-1528.
- A. Alekou et al., “SPS Studies in Preparation for the Crab Cavity Experiment”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2133-2135.
- K. Nakayama et al., “Beam Dynamic Behaviour of the Injector Synchrotron in the 8 geV Synchrotron Radiation Facility (SPring-8)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1530-1533.
- V. A. Kalinin, V. T. Baranov, G. V. Khitev, and O. P. Lebedev, “Experimental Study of the Transverse Beam Size Used a Fast Wire Scanner in the U70 at IHEP”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 480-482.
- E. Chiadroni et al., “High Energy Emittance Measurement at SPARC”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD44, pp. 402-404.
- L. Li et al., “Field Measurement of the Quadrupole Magnet for CSNS/RCS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1265-1267.
- C. M. Warsop et al., “High Intensity Loss Mechanisms on the ISIS Rapid Cycling Synchrotron”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO3LR03, pp. 203-207.
- V. Ivanov et al., “Reverse Emittance Exchange for Muon Colliders”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP093, pp. 2721-2723.
- W. Decking, “Accelerator Layout and Physics of X-Ray Free-Electron Lasers”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUOB002, pp. XX-XX.
- F. Wang et al., “Progress of the eRHIC Electron Ring Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT148, pp. 887-889.
- M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 102-104.
- B. P. Wang, Y. B. Leng, Y. B. Yan, L. Y. Yu, R. X. Yuan, and W. M. Zhou, “Development of Cavity Beam Position Monitor System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME051, pp. 586-588.
- M. Lonza et al., “Implementation and Operation of the Elettra Booster Control System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP009, pp. 1544-1546.
- L. Giannessi and C. R. Frascati, “SPARC Operation in Seeded and Chirped Mode”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOOAI4, pp. 4-11.
- R. Nagaoka et al., “Design Considerations of a 7BA-6BA Lattice for the Future Upgrade of SOLEIL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2815-2817.
- S. Marletta, E. G. Messina, L. Celona, F. Chines, G. Ciavola, and S. Gammino, “Ionization Efficiency Measurements with The Microwave Discharge Ion Source MIDAS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B06, pp. 1601-1603.
- P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
- A. Kanareykin, S. P. Antipov, J. E. Butler, C.-J. Jing, W. Gai, and V. Yakimenko, “Advances in Beam Tests of Dielectric Based Accelerating Structures”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPLB03, pp. 144-146.
- S. Wang et al., “Assembly, alignment and tuning of the XiPAF DTL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM138, pp. 1284-1287.
- K. Fan, S. Fukuoka, H. Matsumoto, T. Sugimoto, and T. Toyama, “Coupling Impedance Study of the New Injection Kicker Magnets of the JPARC Main Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP003, pp. 3725-3727.
- B. Yasatekin, O. Cakir, G. Turemen, E. Celebi, and G. Unel, “DEMIRCI: An RFQ Design Software”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 81-83.
Back to search