JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “Development Status of SINAP Timing System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME032, pp. 2992-2994. 
[n]	S. S. Kurennoy, “Beam Position-Phase Monitors for SNS Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC11, pp. 172-174. 
[n]	M. M. Musardo et al., “NSLS-II Magnetic Measurement System Facility”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC15, pp. 1172-1174. 
[n]	Q.-Sh. Shu, G. Cheng, and J. Susta, “Five Projects of High RF Power Input Couplers and Windows for SRF Accelerators”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP34, pp. 706-710. 
[n]	F. Meot, H. Huang, Y. Luo, V. H. Ranjbar, G. Robert-Demolaize, and S. M. White, “Polarization Simulations in the RHIC Run 15 Lattice”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2372-2374. doi:10.18429/JACoW-IPAC2015-TUPWI053
[n]	S. Nath, R. W. Garnett, G. R. Swain, and T. P. Wangler, “Beam Dynamics Design of a Pion Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU414, pp. 338-340. 
[n]	N. B. Mistry and R. Kersevan, “Massive Titanium Sublimation Pumping in the CESR Interaction Region”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C006, pp. 3559-3561. 
[n]	A. Gorski, R. Wright, C. Pitts, and S. Sharma, “Design and Construction of Septum Magnets at the 7-GeV APS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP160, pp. 3342-3344. 
[n]	S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367. 
[n]	J. A. Clarke et al., “Status of CLARA, a New FEL Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 49-53. doi:10.18429/JACoW-FEL2015-MOP011
[n]	J. R. Rees, “The PEP Storage Ring-Current Status”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 1989-1994. 
[n]	A. Akiyama et al., “Slow Ground Motion and Large Future Accelerator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP072G, pp. 2600-2602. 
[n]	M. A. Preger et al., “Performance and Operation of the DAFNE Accumulator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP44G, pp. 415-417. 
[n]	V. Yakimenko et al., “FACET-II Accelerator Research with Beams of Extreme Intensities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1067-1070. doi:10.18429/JACoW-IPAC2016-TUOBB02
[n]	S. Ackermann, B. Faatz, V. Miltchev, and J. Rossbach, “Optimization of HHG Seeding at Flash II”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD11, pp. 249-252. 
[n]	A. G. Shkvarunets, M. E. Conde, R. B. Fiorito, W. Gai, P. G. O, and J. G. Power, “Optical Diffraction-Dielectric Foil Radiation Interferometry Diagnostic for Low Energy Electron Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS034, pp. 4012-4014. 
[n]	J. R. Aggus, D. Edwards, H. J. Halama, and J. C. Herrera, “Characteristics of the ISABELLE Vacuum System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1287-1290. 
[n]	L. Dovlatyan, T. M. Antonsen, B. L. Beaudoin, I. Haber, D. B. Matthew, and K. J. Ruisard, “Preliminary Lattice Studies for the Single-Invariant Optics Experiment at the University of Maryland”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 367-370. doi:10.18429/JACoW-IPAC2019-MOPGW105
[n]	C. F. Papadopoulos et al., “Injector Design Studies for NGLS”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO69, pp. 391-394. 
[n]	P. Kneisel, D. Mansen, G. Mueller, H. Piel, J. Pouryamout, and R. Roeth, “Nb3Sn Layers on High-Purity Nb Cavities with Very High Quality Factors and Accelerating Gradients”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP002L, pp. 2085-2087. 
[n]	N. G. Reshetnyak et al., “Investigation on the Electron Beam Formation in the Magnetron Gun with a Secondary-Emission Cathode Using the Masgnetic System Based on Permanent Magnets”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC011, pp. 349-351. 
[n]	M. M. Shehab and G. Vignola, “Mechanical Design Considerations for Sesame Main Subsystems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN047, pp. 263-265. 
[n]	L. Serafini, A. Bacci, and M. Ferrario, “Ultra-Short Electron Bunch Generation with a Rectilinear Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH064, pp. 2242-2244. 
[n]	L. R. Glasgow and J. M. Haughian, “Shielding Doors”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 712-718. 
[n]	C. H. Yi, M.-H. Cho, S. H. Kim, H. Lee, and W. Namkung, “Design and Machine Features of 2.2-m C-band Accelerating Structure”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC035, pp. 148-150. 
[n]	Y. T. Oganessian et al., “Status Report of the U400 Cyclotron at the FLNR JINR”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10001, pp. XX-XX. 
[n]	M. J. Hogan et al., “Road to a Plasma Wakefield Accelerator Based Linear Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU1GRI01, pp. 646-646. 
[n]	G. Stancari, V. Moens, and S. Redaelli, “Beam Dynamics in an Electron Lens with the Warp Particle-in-cell Code”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 451-453. doi:10.18429/JACoW-IPAC2014-MOPME033
[n]	J. L. Sun et al., “Status of the Beam Instrumentation System of CSNS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 95-97. doi:10.18429/JACoW-HB2016-MOPR017
[n]	M. Sassowsky et al., “Steel Septum Magnets for the LHC Beam Injection and Extraction”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE083, pp. 2514-2516. 
[n]	A. Wagner, “International Collaboration with High Energy Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOXAMH01, pp. XX-XX. 
[n]	Y. Yamaguchi and Y. Abe, “The Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUM1C03, pp. 121-123. 
[n]	B. L. Parker, “Skew Quadrupole Focusing Lattices and Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA010, pp. 45-47. 
[n]	A. D. Cahill, J. B. Rosenzweig, V. A. Dolgashev, S. G. Tantawi, and S. P. Weathersby, “Ultra High Gradient Breakdown Rates in X-Band Cryogenic Normal Conducting Rf Accelerating Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4395-4398. doi:10.18429/JACoW-IPAC2017-THPIK125
[n]	T. Wamsat, N. Baboi, B. Lorbeer, and P. Zhang, “Performance of a Downconverter Test-electronics with MTCA-based Digitizers for Beam Position Monitoring in 3.9 GHz Accelerating Cavities”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA23, pp. 386-389. 
[n]	C. M. Ginsburg, “Fermilab 1.3 GHz Superconducting RF Cavity and Cryomodule Program for Future Linacs”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPLB06, pp. 153-155. 
[n]	J. A. Clarke, “A Review of Optical Diagnostics Techniques for Beam Profile Measurements”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1643-1646. 
[n]	R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255. 
[n]	D. Fernandez-Carreiras, “Status of the Alba Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP090, pp. 287-289. 
[n]	E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 22-25. doi:10.18429/JACoW-ICALEPCS2015-MOC3O02
[n]	D. R. Copenhagen, E. A. Knapp, and J. M. Potter, “Operating Characteristics of a Full Power Cloverleaf Accelerator Tank”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-10, pp. 137-139. 
[n]	S. A. Melnikov and I. N. Meshkov, “Stability of Charged Particle Motion in a Storage Ring With Focusing by a Longitudinal Magnetic Field”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 158-160. doi:10.18429/JACoW-RUPAC2018-TUPSA08
[n]	G. Riddone, T. O. Niinikoski, F. Rossi, R. J. Raatikainen, K. ?ûsterberg, and A. Samoshkin, “Improved Modelling of the Thermo-mechanical Behavior of the CLIC Two-Beam Module”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR033, pp. 1891-1893. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search