Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. L. Birx, S. A. Hawkins, S. E. Poor, L. L. Reginato, and M. W. Smith, “Technology of Magnetically Driven Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2743-2748.
[n] A. Chertovskikh, “VME Controller Based on PowerPC 440GX Embedded Processor for Using in KSTAR Data Acquisition and Control System.”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP560, pp. XX-XX.
[n] K.-H. Park et al., “Development of PAL-XFEL Magnet Power Supply”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3564-3566. doi:10.18429/JACoW-IPAC2016-THPMW013
[n] J. Billan, J. P. Gourber, and K. N. Henrichsen, “Determination of the Particle Momentum in LEP from Precise Magnet Measurements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2122-2125.
[n] K. Zhou et al., “Preliminary Geometry Optimization of a 3.5-Cell SRF Gun Cavity at ELBE Based on Beam Dynamics”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 374-377. doi:10.18429/JACoW-FEL2019-WEP026
[n] J. D. Lawson, “Collider Constraints in the Choices for Wavelength and Gradient Scaling”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper FR2-1, pp. 599-603.
[n] C. R. Emigh and D. W. Mueller, “The LASL High-Duty-Factor Ion Source”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-5, pp. 293-305.
[n] P. Girault, C. Bourat, P. Letellier, G. Meyrand, S. Sierra, and D. Tronc, “Progress Report on 3 pi/4 Backward TW Accelerating Module for the ELETTRA 1.5 GeV Electron Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 518-521.
[n] C. M. Warsop, “The Beam Loss Collection System in the ESS Accumulator Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A09, pp. 2184-2186.
[n] A. Sumbaev, “IREN Test Facility at JINR”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP68, pp. 505-507.
[n] M. Okamura and A. Kondrashev, “Review of Laser Driven Sources for Multi-charged Ions”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB02, pp. 3761-3765.
[n] A. Dazzi, F. Glotin, C. Mayet, J.-M. Ortega, and R. Prazeres, “Local Infrared Microspectroscopy with 100nm Spatial Resolution and Application to Cell Imaging”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROB05, pp. 789-792.
[n] L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
[n] B. S. Wang and K.-B. Liu, “Development of a Digital Control Interface Card with a LabVIEW Control Program for TLS Corrector Magnet Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA047, pp. 777-779.
[n] M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Analysis of the SPL Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE082, pp. 4713-4715.
[n] A. V. Elzhov et al., “Study of Modified TBA Driver Scheme”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA5, pp. 3393-3395.
[n] T. S. Chou and C. Lanni, “Lifetime of Titanium Filament at Constant Current”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3323-3325.
[n] X. Hu, D. Li, Y. Q. Xiong, J. Yang, and T. Yu, “Study on PXI and PAC-Based HIL Simulation Control System of CYCHU-10 Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP092, pp. 239-241.
[n] R. R. Steerenberg, J.-P. Burnet, M. Giovannozzi, O. Michels, E. M?®tral, and B. Vandorpe, “CERN Proton Synchrotron Working Point Control Using an Improved Version of the Pole-face-windings and Figure-of-eight Loop Powering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH097, pp. 264-266.
[n] Y. L. Hwong et al., “An Analysis of the Control Hierarchy Modelling of the CMS Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP015, pp. 706-708.
[n] I. Hofmann, D. Boehne, K. Beckert, A. Jahnke, and R. W. Mueller, “Improvements on the HIBALL Heavy Ion Fusion Driver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3070-3073.
[n] G. Horlitz, “Review of Large-scale Cryogenic Systems for Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 297-302.
[n] J. Niedziela, C. Montag, and T. Satogata, “Quadrupole Beam-Based Alignment at RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE060, pp. 3493-3495.
[n] M. V. Fazio, J. M. Potter, and D. W. Reid, “Experimental Investigation of Heating Phenomena in Linac Mechanical Interfaces from RF Field Penetration”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2895-2898.
[n] P. J. Tallerico, “High Performance Klystrons for Accelerator Applications”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 257-260.
[n] J. Xie, “Development of Linear Accelerators in China”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0003, pp. 14-18.
[n] J. P. H. Sladen, “Status of Superconducting Cavities in LEP”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A12, pp. 116-121.
[n] J. A. Nation and A. P. Anselmo, “The Ultralac: A Collective Wave Accelerator for Ultrarelativistic Particles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 145-148.
[n] A. N. Zhuravlev et al., “The VEPP-4M Dynamic Aperture Determination with Beam-beam Effects”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC080, pp. 3170-3172.
[n] G. Geloni, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Misconceptions regarding Second Harmonic Generation in X-Ray Free-Electron Lasers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP005, pp. XX-XX.
[n] R. A. Jameson, “Introduction to RFQ Session”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0002, pp. 49-52.
[n] V. Volkov, K. Floettmann, and D. Janssen, “Superconducting RF Gun Cavities for large Bunch Charges”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN063, pp. 4150-4152.
[n] U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1257-1260.
[n] D. F. Orris et al., “A Digital Quench Detection System for Superconducting Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP101, pp. 3191-3193.
[n] M. M. Kats, “Compact and Non Expensive Transport Systems for Medical Facilities Using Proton and Ion Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP007, pp. 1303-1305.
[n] J. M. Jowett, W. Kalbreier, and S. Myers, “Preparations for High-Luminosity LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 403-406.
[n] H. Baba et al., “DC Power Supplies for 1MW Klystron in the TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1523-1526.
[n] M. V. Timoshenko et al., “Development of Longitudinal Beam Profile Diagnostics for Beam-beam Effects Study at VEPP-2000”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 410-414. doi:10.18429/JACoW-IBIC2018-WEPA18
[n] A. E. Shikanov et al., “Study of Oil Wells With the Use of Accelerator Tubes, Time and Energy Spectrometers of Neutrons and Gamma Rays in a Single Geophysical Complex”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 490-492. doi:10.18429/JACoW-RUPAC2016-WEPSB056
[n] R. E. Laxdal, J. J. Keir, B. Matheson, N. Muller, and Z. Y. Yao, “Mechanical Tuner for a 325 MHz Balloon Single Spoke Resonator”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 730-734. doi:10.18429/JACoW-SRF2019-TUP106
[n] A. Orlati et al., “Design Strategies in the Development of the Italian Single-dish Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 330-333. doi:10.18429/JACoW-ICALEPCS2015-MOPGF110
[n] A. Young, J. E. Dusatko, S. L. Hoobler, J. J. Olsen, T. Straumann, and C. Kim, “Performance Measurements of the New X-Band Cavity BPM Receiver”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC24, pp. 735-738.
[n] P. M. Cronje, H. Gargan, A. M??ller, P. F. Rohwer, and P. A. van Schalkwyk, “Beam Centering with a Harp and Probes in the NAC SSC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-09, pp. 305-308.
[n] L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
[n] H. Sato et al., “Polarized Proton Acceleration at the KEK PS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1758-1761.
[n] G. O. Hendry, “Compact Cyclotron Engineering for Application (Invited Paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 616-627.
[n] P. I. Gladkikh, I. M. Karnaukhov, S. Kononenko, A. A. Shcherbakov, and A. S. Tarasenko, “A Slow Half-Integer Resonance Beam Extraction in a Pulse Stretcher Ring PSR-2000”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1691-1693.
[n] M. E. Angoletta, S. C. P. Albright, A. Findlay, M. Jaussi, J. C. Molendijk, and N. Pittet, “Upgrade of CERNÔÇÖs PSB Digital Low-Level RF System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3958-3961. doi:10.18429/JACoW-IPAC2019-THPRB068
[n] C. Lopez Osses et al., “AI-Enabled Adaptive Control of Beam Current in an Isochronous Cyclotron Using GA-Tuned PID”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6342, unpublished.
[n] P. G. Bricault et al., “Frontier Technologies and Future Directions in High Intensity ISOL RIB Production”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOA01, pp. XX-XX.
[n] A. Winter et al., “Bunch Length Measurements at the SLS Linac using Electro-optical Techniques”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH01, pp. 253-255.
[n] J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
[n] N. Nakamura et al., “Electron-Beam Size Measurement with a Beam Profile Monitor Using Fresnel Zone Plates”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB011, pp. 530-532.
[n] M. J. Boland, T. M. Mitsuhashi, and K. P. Wootton, “Low Noise and High Dynamic Range Optical Interferometer Beamsize Measurements”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF20, pp. 550-552.
[n] S. Khujaev, A. I. Muminov, and A. Vasidov, “Cyclotron Production of 139Ce from Lanthanum Targets”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-12, pp. 62-64.
[n] S. I. Meigo et al., “High Power Target Instrumentation at J-PARC for Neutron and Muon Sources”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 391-396. doi:10.18429/JACoW-HB2016-WEPM2X01
[n] B. K. Popovic, L. Teofili, and C. Vollinger, “Impedance Analysis of New PS Internal Dump Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3083-3086. doi:10.18429/JACoW-IPAC2018-THPAF052
[n] G. A. Blair, “Lasers in Beam Diagnostics”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUTTT01, pp. 55-64.
[n] J.-W. Kim, J.-H. Jang, H. Jin, Z. A. Conway, B. Mustapha, and P. N. Ostroumov, “Beam Optics Simulations Study on the Pre-Stripper Linac for Rare Isotope Science Project”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 31-35. doi:10.18429/JACoW-HB2016-MOPM3P01
[n] M. Schwickert, P. Forck, T. Giacomini, P. Kowina, H. Reeg, and A. Schl?Ârit, “Beam Diagnostic Developments for FAIR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOA04, pp. 424-426.
[n] J. Harasimowicz and C. P. Welsch, “Beam Position Monitor Development for the USR”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM047, pp. 252-256.
[n] L. N. S. Thompson et al., “Interaction Region Design for a Ring-Ring LHeC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ016, pp. 3720-3722.
[n] Y. Yuri, M. Fukuda, and T. Yuyama, “Transverse Profile Shaping of a Charged-Particle Beam using Multipole Magnets - Formation of Hollow Beams -”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 184-186. doi:10.18429/JACoW-IPAC2019-MOPGW041
[n] G. A. Loew, “Review of Electron-Positron Linear Colliders”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TU101, pp. 265-269.
[n] A. Moll, R. Clarken, P. Martin, and S. T. Mudie, “Lightflow - a Lightweight, Distributed Workflow System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1457-1459. doi:10.18429/JACoW-ICALEPCS2017-THPHA043
[n] T. E. D, G. Guignard, and T. Raubenheimer, “The CLIC Main Linac Bunch Compressor”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP51C, pp. 451-453.
[n] G. Iadarola et al., “Electron Cloud Studies for the Upgrade of the CERN PS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA013, pp. 2522-2524.
[n] I. Almog, J. Jaeger, M. Lee, and M. Woodley, “On-Line Model Driven Control of the SLC Electron Damping Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2098-2101.
[n] K. Bongardt and K. Kennepohl, “Determination of 100 psec Short Linac Bunches by Broadband Pickups and Reconstruction Technique”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 976-979.
[n] Lonza M., Bulfone D., Gamba C., “Digital Processing Electronics for the ELETTRA Transverse Multi-Bunch Feedback System”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1O03, pp. XX-XX.
[n] S. Hilbrich et al., “Plans for an EEHG-based Short-Pulse Facility at the DELTA Storage Ring”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 363-367. doi:10.18429/JACoW-FEL2015-TUP012
[n] J. Cuperus and R. Morgado, “A Multi-Wire Chamber System for Heavy Ion Beam Monitoring at the Bevalac”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1561-1565.
[n] L. Scibile, D. Forkel-Wirth, H. G. Menzel, D. Perrin, G. Segura Millan, and P. Vojtyla, “The LHC Radiation Monitoring System for the Environment and Safety”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT033, pp. 1903-1905.
[n] F. Burkart et al., “The Experimental Area at the ARES LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 867-870. doi:10.18429/JACoW-IPAC2019-MOPTS014
[n] J. Claus, “Reduction of Losses in Linacs for Protons or Heavy Ions”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1098-1101.
[n] R. Witkover, E. Zitvogel, and R. Michnoff, “RHIC Beam Loss Monitor System Design”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P067, pp. 2218-2220.
[n] S. Molloy, G. R. White, and M. Woodley, “A Flight Simulator Based Beam Based Alignment Package for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP024, pp. 4817-4819.
[n] F. Foroughi, E. Ahmadi, S. Dastan, S. M. Jazayeri, and J. Rahighi, “BEAM DYNAMICS OF HIGH CHROMATICITY LATTICE FOR IRANIAN LIGHT SOURCE FACILITY (ILSF) STORAGE RING”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 943-945. doi:10.18429/JACoW-IPAC2019-MOPTS038
[n] V. Schlott, “Highlights from DIPAC 2009”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper THIMNB01, pp. 566-571.
[n] J. R. Delayen, “Upgrade of the CEBAF Acceleration System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA51, pp. 3498-3500.
[n] K. Futatsukawa et al., “Chopper Operation for the Tandem Scrapers at the J-PARC Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP067, pp. 581-583.
[n] S. R. Smith et al., “LCLS Cavity Beam Position Monitors”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUOC03, pp. 285-287.
[n] S. Burger, D. Kraehenbuehl, E. Bravin, F. Roncarolo, Q. Bouille, and S. Beauvivre, “IRRADIATION TESTS OF A DIGITAL RADIATION-TOLERANT CAMERA FOR CERN’S PARTICLE ACCELERATOR INSTRUMENTATION”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 391-395. doi:10.18429/JACoW-IBIC2025-TUPCO16
[n] W. R. Fowkes, R. S. Callin, and A. E. Vlieks, “High Power RF Window and Waveguide Component Development and Testing Above 100 MW at X-Band”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-50, pp. 184-186.
[n] A. Chirkov, N. Doinikov, Yu. Severgin, and S. Sytchevsky, “Harmonic Analysis of Elongated Rectangular Aperture Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1250-1253.
[n] Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
[n] A. Miura, H. Akikawa, M. Ikegami, and H. Sako, “Operational Performance of Wire Scanner Monitor in J-PARC Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE021, pp. 1008-1010.
[n] V. D. Shemelin and M. Liepe, “Superconducting Multicell Cavity Design for the Energy Recovery Linac at Cornell”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP051, pp. 939-941.
[n] Y. A. Cheng, A. Kurup, A. P. Letchford, J. K. Pozimski, and P. Savage, “RFQ Cold Model RF Measurements and Waveguide-to-Coaxial line Transition Design for the Front-End Test Stand at RAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS002, pp. 1655-1657.
[n] M. Hofer et al., “Integrated Full HE-LHC Optics and Its Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 348-351. doi:10.18429/JACoW-IPAC2018-MOPMK002
[n] M. May, H. Edwards, M. Harrison, R. Isiminger, and J. Jagger, “Mechanical Design of Lambertson Magnets for Injection into the Energy Saver”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2842-2844.
[n] P. N. Potukuchi, “Indian Cavity Fabrication Facility and Test Results”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOBAU05, pp. 502-508.
[n] M. Apollonio, M. Aslaninejad, and J. Pasternak, “Beam Dynamics Studies for a Neutrino Factory Decay Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP056, pp. 3832-3834.
[n] T. Fukui, T. Masuda, S. Sasaki, T. Takashima, and R. Tanaka, “Applications of Reconfigurable Logic Devices for Accelerator Controls”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU113, pp. XX-XX.
[n] M. Hostettler et al., “Comparison of Transverse Emittance Measurements in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 377-380. doi:10.18429/JACoW-IPAC2017-MOPAB110
[n] J. S. Oh et al., “Efficiency Analysis of the First 111-MW C-Band Klystron-Modulator for Linear Collider”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D032, pp. 163-165.
[n] W. Lawson et al., “Amplification Studies of a Multi-Megawatt Two-Cavity X-Band Gyroklystron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 658-661.
[n] N. N. Alexeev, D. G. Koshkarev, and B. Yu. Sharkov, “The ITEP Powerful Heavy Ion Accumulator (ITEP-TWAC) Project - Recent Development and Prospects”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH068, pp. 3383-3385.
[n] S. PAI, E. Prebys, and M. Backfish, “Benchmarking COMSOL and OPAL at Crocker Nuclear Lab”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP035, unpublished.
[n] O. Borisov, N. Neskovic, and L. Onischenko, “Calculation of Orbit Expansion Effect for the VINCY Cyclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP078G, pp. 2438-2440.
[n] P. Drumm, “MICE: The International Muon Ionisation Cooling Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAA004, pp. 398-400.
[n] R. L. Gluckstern and H. S. Butler, “Transverse Beam Blow-Up in a Standing Wave Linac Cavity”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 607-613.
[n] S. Brandenburg, H. W. Nijboer, and W. K. van Asselt, “Beam Phase Measurements in the AGOR Cyclotron”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT12, pp. XX-XX.
[n] U. Berges and K. Wille Institute for Accelerator Physics and Synchrotron Radiation, “Status of the Delta Synchrotron Light-Monitoring-System”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS19, pp. XX-XX.
[n] S. Brandenburg, “AGOR STATUS REPORT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18C5, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- D. L. Birx, S. A. Hawkins, S. E. Poor, L. L. Reginato, and M. W. Smith, “Technology of Magnetically Driven Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2743-2748.
- A. Chertovskikh, “VME Controller Based on PowerPC 440GX Embedded Processor for Using in KSTAR Data Acquisition and Control System.”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP560, pp. XX-XX.
- K.-H. Park et al., “Development of PAL-XFEL Magnet Power Supply”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3564-3566.
- J. Billan, J. P. Gourber, and K. N. Henrichsen, “Determination of the Particle Momentum in LEP from Precise Magnet Measurements”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2122-2125.
- K. Zhou et al., “Preliminary Geometry Optimization of a 3.5-Cell SRF Gun Cavity at ELBE Based on Beam Dynamics”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 374-377.
- J. D. Lawson, “Collider Constraints in the Choices for Wavelength and Gradient Scaling”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper FR2-1, pp. 599-603.
- C. R. Emigh and D. W. Mueller, “The LASL High-Duty-Factor Ion Source”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper D-5, pp. 293-305.
- P. Girault, C. Bourat, P. Letellier, G. Meyrand, S. Sierra, and D. Tronc, “Progress Report on 3 pi/4 Backward TW Accelerating Module for the ELETTRA 1.5 GeV Electron Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 518-521.
- C. M. Warsop, “The Beam Loss Collection System in the ESS Accumulator Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A09, pp. 2184-2186.
- A. Sumbaev, “IREN Test Facility at JINR”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP68, pp. 505-507.
- M. Okamura and A. Kondrashev, “Review of Laser Driven Sources for Multi-charged Ions”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRXAB02, pp. 3761-3765.
- A. Dazzi, F. Glotin, C. Mayet, J.-M. Ortega, and R. Prazeres, “Local Infrared Microspectroscopy with 100nm Spatial Resolution and Application to Cell Imaging”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROB05, pp. 789-792.
- L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371.
- B. S. Wang and K.-B. Liu, “Development of a Digital Control Interface Card with a LabVIEW Control Program for TLS Corrector Magnet Power Supply”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA047, pp. 777-779.
- M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Analysis of the SPL Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE082, pp. 4713-4715.
- A. V. Elzhov et al., “Study of Modified TBA Driver Scheme”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA5, pp. 3393-3395.
- T. S. Chou and C. Lanni, “Lifetime of Titanium Filament at Constant Current”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3323-3325.
- X. Hu, D. Li, Y. Q. Xiong, J. Yang, and T. Yu, “Study on PXI and PAC-Based HIL Simulation Control System of CYCHU-10 Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP092, pp. 239-241.
- R. R. Steerenberg, J.-P. Burnet, M. Giovannozzi, O. Michels, E. M?®tral, and B. Vandorpe, “CERN Proton Synchrotron Working Point Control Using an Improved Version of the Pole-face-windings and Figure-of-eight Loop Powering”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH097, pp. 264-266.
- Y. L. Hwong et al., “An Analysis of the Control Hierarchy Modelling of the CMS Detector Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP015, pp. 706-708.
- I. Hofmann, D. Boehne, K. Beckert, A. Jahnke, and R. W. Mueller, “Improvements on the HIBALL Heavy Ion Fusion Driver”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3070-3073.
- G. Horlitz, “Review of Large-scale Cryogenic Systems for Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 297-302.
- J. Niedziela, C. Montag, and T. Satogata, “Quadrupole Beam-Based Alignment at RHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE060, pp. 3493-3495.
- M. V. Fazio, J. M. Potter, and D. W. Reid, “Experimental Investigation of Heating Phenomena in Linac Mechanical Interfaces from RF Field Penetration”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2895-2898.
- P. J. Tallerico, “High Performance Klystrons for Accelerator Applications”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 257-260.
- J. Xie, “Development of Linear Accelerators in China”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOA0003, pp. 14-18.
- J. P. H. Sladen, “Status of Superconducting Cavities in LEP”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A12, pp. 116-121.
- J. A. Nation and A. P. Anselmo, “The Ultralac: A Collective Wave Accelerator for Ultrarelativistic Particles”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 145-148.
- A. N. Zhuravlev et al., “The VEPP-4M Dynamic Aperture Determination with Beam-beam Effects”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC080, pp. 3170-3172.
- G. Geloni, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Misconceptions regarding Second Harmonic Generation in X-Ray Free-Electron Lasers”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP005, pp. XX-XX.
- R. A. Jameson, “Introduction to RFQ Session”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0002, pp. 49-52.
- V. Volkov, K. Floettmann, and D. Janssen, “Superconducting RF Gun Cavities for large Bunch Charges”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN063, pp. 4150-4152.
- U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1257-1260.
- D. F. Orris et al., “A Digital Quench Detection System for Superconducting Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP101, pp. 3191-3193.
- M. M. Kats, “Compact and Non Expensive Transport Systems for Medical Facilities Using Proton and Ion Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP007, pp. 1303-1305.
- J. M. Jowett, W. Kalbreier, and S. Myers, “Preparations for High-Luminosity LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 403-406.
- H. Baba et al., “DC Power Supplies for 1MW Klystron in the TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1523-1526.
- M. V. Timoshenko et al., “Development of Longitudinal Beam Profile Diagnostics for Beam-beam Effects Study at VEPP-2000”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 410-414.
- A. E. Shikanov et al., “Study of Oil Wells With the Use of Accelerator Tubes, Time and Energy Spectrometers of Neutrons and Gamma Rays in a Single Geophysical Complex”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 490-492.
- R. E. Laxdal, J. J. Keir, B. Matheson, N. Muller, and Z. Y. Yao, “Mechanical Tuner for a 325 MHz Balloon Single Spoke Resonator”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 730-734.
- A. Orlati et al., “Design Strategies in the Development of the Italian Single-dish Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 330-333.
- A. Young, J. E. Dusatko, S. L. Hoobler, J. J. Olsen, T. Straumann, and C. Kim, “Performance Measurements of the New X-Band Cavity BPM Receiver”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC24, pp. 735-738.
- P. M. Cronje, H. Gargan, A. M??ller, P. F. Rohwer, and P. A. van Schalkwyk, “Beam Centering with a Harp and Probes in the NAC SSC”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-09, pp. 305-308.
- L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
- H. Sato et al., “Polarized Proton Acceleration at the KEK PS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1758-1761.
- G. O. Hendry, “Compact Cyclotron Engineering for Application (Invited Paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 616-627.
- P. I. Gladkikh, I. M. Karnaukhov, S. Kononenko, A. A. Shcherbakov, and A. S. Tarasenko, “A Slow Half-Integer Resonance Beam Extraction in a Pulse Stretcher Ring PSR-2000”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1691-1693.
- M. E. Angoletta, S. C. P. Albright, A. Findlay, M. Jaussi, J. C. Molendijk, and N. Pittet, “Upgrade of CERNÔÇÖs PSB Digital Low-Level RF System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3958-3961.
- C. Lopez Osses et al., “AI-Enabled Adaptive Control of Beam Current in an Isochronous Cyclotron Using GA-Tuned PID”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6342, this conference.
- P. G. Bricault et al., “Frontier Technologies and Future Directions in High Intensity ISOL RIB Production”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper MOA01, pp. XX-XX.
- A. Winter et al., “Bunch Length Measurements at the SLS Linac using Electro-optical Techniques”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOALH01, pp. 253-255.
- J. E. Dey and I. Kourbanis, “A New Main Injector Radio Frequency System For 2.3 MW Project X Operations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP131, pp. 1079-1081.
- N. Nakamura et al., “Electron-Beam Size Measurement with a Beam Profile Monitor Using Fresnel Zone Plates”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB011, pp. 530-532.
- M. J. Boland, T. M. Mitsuhashi, and K. P. Wootton, “Low Noise and High Dynamic Range Optical Interferometer Beamsize Measurements”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF20, pp. 550-552.
- S. Khujaev, A. I. Muminov, and A. Vasidov, “Cyclotron Production of 139Ce from Lanthanum Targets”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-12, pp. 62-64.
- S. I. Meigo et al., “High Power Target Instrumentation at J-PARC for Neutron and Muon Sources”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 391-396.
- B. K. Popovic, L. Teofili, and C. Vollinger, “Impedance Analysis of New PS Internal Dump Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3083-3086.
- G. A. Blair, “Lasers in Beam Diagnostics”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUTTT01, pp. 55-64.
- J.-W. Kim, J.-H. Jang, H. Jin, Z. A. Conway, B. Mustapha, and P. N. Ostroumov, “Beam Optics Simulations Study on the Pre-Stripper Linac for Rare Isotope Science Project”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 31-35.
- M. Schwickert, P. Forck, T. Giacomini, P. Kowina, H. Reeg, and A. Schl?Ârit, “Beam Diagnostic Developments for FAIR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper WEOA04, pp. 424-426.
- J. Harasimowicz and C. P. Welsch, “Beam Position Monitor Development for the USR”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM047, pp. 252-256.
- L. N. S. Thompson et al., “Interaction Region Design for a Ring-Ring LHeC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ016, pp. 3720-3722.
- Y. Yuri, M. Fukuda, and T. Yuyama, “Transverse Profile Shaping of a Charged-Particle Beam using Multipole Magnets - Formation of Hollow Beams -”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 184-186.
- G. A. Loew, “Review of Electron-Positron Linear Colliders”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TU101, pp. 265-269.
- A. Moll, R. Clarken, P. Martin, and S. T. Mudie, “Lightflow - a Lightweight, Distributed Workflow System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1457-1459.
- T. E. D, G. Guignard, and T. Raubenheimer, “The CLIC Main Linac Bunch Compressor”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP51C, pp. 451-453.
- G. Iadarola et al., “Electron Cloud Studies for the Upgrade of the CERN PS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA013, pp. 2522-2524.
- I. Almog, J. Jaeger, M. Lee, and M. Woodley, “On-Line Model Driven Control of the SLC Electron Damping Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2098-2101.
- K. Bongardt and K. Kennepohl, “Determination of 100 psec Short Linac Bunches by Broadband Pickups and Reconstruction Technique”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 976-979.
- Lonza M., Bulfone D., Gamba C., “Digital Processing Electronics for the ELETTRA Transverse Multi-Bunch Feedback System”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1O03, pp. XX-XX.
- S. Hilbrich et al., “Plans for an EEHG-based Short-Pulse Facility at the DELTA Storage Ring”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 363-367.
- J. Cuperus and R. Morgado, “A Multi-Wire Chamber System for Heavy Ion Beam Monitoring at the Bevalac”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1561-1565.
- L. Scibile, D. Forkel-Wirth, H. G. Menzel, D. Perrin, G. Segura Millan, and P. Vojtyla, “The LHC Radiation Monitoring System for the Environment and Safety”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT033, pp. 1903-1905.
- F. Burkart et al., “The Experimental Area at the ARES LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 867-870.
- J. Claus, “Reduction of Losses in Linacs for Protons or Heavy Ions”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1098-1101.
- R. Witkover, E. Zitvogel, and R. Michnoff, “RHIC Beam Loss Monitor System Design”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P067, pp. 2218-2220.
- S. Molloy, G. R. White, and M. Woodley, “A Flight Simulator Based Beam Based Alignment Package for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP024, pp. 4817-4819.
- F. Foroughi, E. Ahmadi, S. Dastan, S. M. Jazayeri, and J. Rahighi, “BEAM DYNAMICS OF HIGH CHROMATICITY LATTICE FOR IRANIAN LIGHT SOURCE FACILITY (ILSF) STORAGE RING”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 943-945.
- V. Schlott, “Highlights from DIPAC 2009”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper THIMNB01, pp. 566-571.
- J. R. Delayen, “Upgrade of the CEBAF Acceleration System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA51, pp. 3498-3500.
- K. Futatsukawa et al., “Chopper Operation for the Tandem Scrapers at the J-PARC Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP067, pp. 581-583.
- S. R. Smith et al., “LCLS Cavity Beam Position Monitors”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUOC03, pp. 285-287.
- S. Burger, D. Kraehenbuehl, E. Bravin, F. Roncarolo, Q. Bouille, and S. Beauvivre, “IRRADIATION TESTS OF A DIGITAL RADIATION-TOLERANT CAMERA FOR CERN’S PARTICLE ACCELERATOR INSTRUMENTATION”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 391-395.
- W. R. Fowkes, R. S. Callin, and A. E. Vlieks, “High Power RF Window and Waveguide Component Development and Testing Above 100 MW at X-Band”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-50, pp. 184-186.
- A. Chirkov, N. Doinikov, Yu. Severgin, and S. Sytchevsky, “Harmonic Analysis of Elongated Rectangular Aperture Magnets”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1250-1253.
- Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
- A. Miura, H. Akikawa, M. Ikegami, and H. Sako, “Operational Performance of Wire Scanner Monitor in J-PARC Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE021, pp. 1008-1010.
- V. D. Shemelin and M. Liepe, “Superconducting Multicell Cavity Design for the Energy Recovery Linac at Cornell”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP051, pp. 939-941.
- Y. A. Cheng, A. Kurup, A. P. Letchford, J. K. Pozimski, and P. Savage, “RFQ Cold Model RF Measurements and Waveguide-to-Coaxial line Transition Design for the Front-End Test Stand at RAL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS002, pp. 1655-1657.
- M. Hofer et al., “Integrated Full HE-LHC Optics and Its Performance”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 348-351.
- M. May, H. Edwards, M. Harrison, R. Isiminger, and J. Jagger, “Mechanical Design of Lambertson Magnets for Injection into the Energy Saver”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2842-2844.
- P. N. Potukuchi, “Indian Cavity Fabrication Facility and Test Results”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOBAU05, pp. 502-508.
- M. Apollonio, M. Aslaninejad, and J. Pasternak, “Beam Dynamics Studies for a Neutrino Factory Decay Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP056, pp. 3832-3834.
- T. Fukui, T. Masuda, S. Sasaki, T. Takashima, and R. Tanaka, “Applications of Reconfigurable Logic Devices for Accelerator Controls”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU113, pp. XX-XX.
- M. Hostettler et al., “Comparison of Transverse Emittance Measurements in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 377-380.
- J. S. Oh et al., “Efficiency Analysis of the First 111-MW C-Band Klystron-Modulator for Linear Collider”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D032, pp. 163-165.
- W. Lawson et al., “Amplification Studies of a Multi-Megawatt Two-Cavity X-Band Gyroklystron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 658-661.
- N. N. Alexeev, D. G. Koshkarev, and B. Yu. Sharkov, “The ITEP Powerful Heavy Ion Accumulator (ITEP-TWAC) Project - Recent Development and Prospects”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH068, pp. 3383-3385.
- S. PAI, E. Prebys, and M. Backfish, “Benchmarking COMSOL and OPAL at Crocker Nuclear Lab”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP035, unpublished.
- O. Borisov, N. Neskovic, and L. Onischenko, “Calculation of Orbit Expansion Effect for the VINCY Cyclotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP078G, pp. 2438-2440.
- P. Drumm, “MICE: The International Muon Ionisation Cooling Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAA004, pp. 398-400.
- R. L. Gluckstern and H. S. Butler, “Transverse Beam Blow-Up in a Standing Wave Linac Cavity”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 607-613.
- S. Brandenburg, H. W. Nijboer, and W. K. van Asselt, “Beam Phase Measurements in the AGOR Cyclotron”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT12, pp. XX-XX.
- U. Berges and K. Wille Institute for Accelerator Physics and Synchrotron Radiation, “Status of the Delta Synchrotron Light-Monitoring-System”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS19, pp. XX-XX.
- S. Brandenburg, “AGOR STATUS REPORT”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18C5, pp. XX-XX.
Back to search