JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. L. Birx, S. A. Hawkins, S. E. Poor, L. L. Reginato, and M. W. Smith, “Technology of Magnetically Driven Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2743-2748. 
[n]	A. Chertovskikh, “VME Controller Based on PowerPC 440GX Embedded Processor for Using in KSTAR Data Acquisition and Control System.”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP560, pp. XX-XX. 
[n]	K.-H. Park et al., “Development of PAL-XFEL Magnet Power Supply”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3564-3566. doi:10.18429/JACoW-IPAC2016-THPMW013
[n]	J. Billan, J. P. Gourber, and K. N. Henrichsen, “Determination of the Particle Momentum in LEP from Precise Magnet Measurements”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2122-2125. 
[n]	K. Zhou et al., “Preliminary Geometry Optimization of a 3.5-Cell SRF Gun Cavity at ELBE Based on Beam Dynamics”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 374-377. doi:10.18429/JACoW-FEL2019-WEP026
[n]	J. D. Lawson, “Collider Constraints in the Choices for Wavelength and Gradient Scaling”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper FR2-1, pp. 599-603. 
[n]	C. R. Emigh and D. W. Mueller, “The LASL High-Duty-Factor Ion Source”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-5, pp. 293-305. 
[n]	P. Girault, C. Bourat, P. Letellier, G. Meyrand, S. Sierra, and D. Tronc, “Progress Report on 3 pi/4 Backward TW Accelerating Module for the ELETTRA 1.5 GeV Electron Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 518-521. 
[n]	C. M. Warsop, “The Beam Loss Collection System in the ESS Accumulator Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A09, pp. 2184-2186. 
[n]	A. Sumbaev, “IREN Test Facility at JINR”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP68, pp. 505-507. 
[n]	M. Okamura and A. Kondrashev, “Review of Laser Driven Sources for Multi-charged Ions”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB02, pp. 3761-3765. 
[n]	A. Dazzi, F. Glotin, C. Mayet, J.-M. Ortega, and R. Prazeres, “Local Infrared Microspectroscopy with 100nm Spatial Resolution and Application to Cell Imaging”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROB05, pp. 789-792. 
[n]	L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371. 
[n]	B. S. Wang and K.-B. Liu, “Development of a Digital Control Interface Card with a LabVIEW Control Program for TLS Corrector Magnet Power Supply”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA047, pp. 777-779. 
[n]	M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Analysis of the SPL Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE082, pp. 4713-4715. 
[n]	A. V. Elzhov et al., “Study of Modified TBA Driver Scheme”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA5, pp. 3393-3395. 
[n]	T. S. Chou and C. Lanni, “Lifetime of Titanium Filament at Constant Current”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3323-3325. 
[n]	X. Hu, D. Li, Y. Q. Xiong, J. Yang, and T. Yu, “Study on PXI and PAC-Based HIL Simulation Control System of CYCHU-10 Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP092, pp. 239-241. 
[n]	R. R. Steerenberg, J.-P. Burnet, M. Giovannozzi, O. Michels, E. M?®tral, and B. Vandorpe, “CERN Proton Synchrotron Working Point Control Using an Improved Version of the Pole-face-windings and Figure-of-eight Loop Powering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH097, pp. 264-266. 
[n]	Y. L. Hwong et al., “An Analysis of the Control Hierarchy Modelling of the CMS Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP015, pp. 706-708. 
[n]	I. Hofmann, D. Boehne, K. Beckert, A. Jahnke, and R. W. Mueller, “Improvements on the HIBALL Heavy Ion Fusion Driver”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3070-3073. 
[n]	G. Horlitz, “Review of Large-scale Cryogenic Systems for Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 297-302. 
[n]	J. Niedziela, C. Montag, and T. Satogata, “Quadrupole Beam-Based Alignment at RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE060, pp. 3493-3495. 
[n]	M. V. Fazio, J. M. Potter, and D. W. Reid, “Experimental Investigation of Heating Phenomena in Linac Mechanical Interfaces from RF Field Penetration”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2895-2898. 
[n]	P. J. Tallerico, “High Performance Klystrons for Accelerator Applications”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 257-260. 
[n]	J. Xie, “Development of Linear Accelerators in China”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0003, pp. 14-18. 
[n]	J. P. H. Sladen, “Status of Superconducting Cavities in LEP”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A12, pp. 116-121. 
[n]	J. A. Nation and A. P. Anselmo, “The Ultralac: A Collective Wave Accelerator for Ultrarelativistic Particles”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 145-148. 
[n]	A. N. Zhuravlev et al., “The VEPP-4M Dynamic Aperture Determination with Beam-beam Effects”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC080, pp. 3170-3172. 
[n]	G. Geloni, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Misconceptions regarding Second Harmonic Generation in X-Ray Free-Electron Lasers”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP005, pp. XX-XX. 
[n]	R. A. Jameson, “Introduction to RFQ Session”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0002, pp. 49-52. 
[n]	V. Volkov, K. Floettmann, and D. Janssen, “Superconducting RF Gun Cavities for large Bunch Charges”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN063, pp. 4150-4152. 
[n]	U. Bechstedt et al., “Injection and Extraction Magnets of COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1257-1260. 
[n]	D. F. Orris et al., “A Digital Quench Detection System for Superconducting Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP101, pp. 3191-3193. 
[n]	M. M. Kats, “Compact and Non Expensive Transport Systems for Medical Facilities Using Proton and Ion Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP007, pp. 1303-1305. 
[n]	J. M. Jowett, W. Kalbreier, and S. Myers, “Preparations for High-Luminosity LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 403-406. 
[n]	H. Baba et al., “DC Power Supplies for 1MW Klystron in the TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1523-1526. 
[n]	M. V. Timoshenko et al., “Development of Longitudinal Beam Profile Diagnostics for Beam-beam Effects Study at VEPP-2000”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 410-414. doi:10.18429/JACoW-IBIC2018-WEPA18
[n]	A. E. Shikanov et al., “Study of Oil Wells With the Use of Accelerator Tubes, Time and Energy Spectrometers of Neutrons and Gamma Rays in a Single Geophysical Complex”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 490-492. doi:10.18429/JACoW-RUPAC2016-WEPSB056
[n]	R. E. Laxdal, J. J. Keir, B. Matheson, N. Muller, and Z. Y. Yao, “Mechanical Tuner for a 325 MHz Balloon Single Spoke Resonator”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 730-734. doi:10.18429/JACoW-SRF2019-TUP106
[n]	A. Orlati et al., “Design Strategies in the Development of the Italian Single-dish Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 330-333. doi:10.18429/JACoW-ICALEPCS2015-MOPGF110
[n]	A. Young, J. E. Dusatko, S. L. Hoobler, J. J. Olsen, T. Straumann, and C. Kim, “Performance Measurements of the New X-Band Cavity BPM Receiver”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC24, pp. 735-738. 
[n]	P. M. Cronje, H. Gargan, A. M??ller, P. F. Rohwer, and P. A. van Schalkwyk, “Beam Centering with a Harp and Probes in the NAC SSC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-09, pp. 305-308. 
[n]	L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553. 
[n]	H. Sato et al., “Polarized Proton  Acceleration at the KEK PS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1758-1761. 
[n]	G. O. Hendry, “Compact Cyclotron Engineering for Application (Invited Paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 616-627. 
[n]	P. I. Gladkikh, I. M. Karnaukhov, S. Kononenko, A. A. Shcherbakov, and A. S. Tarasenko, “A Slow Half-Integer Resonance Beam Extraction in a Pulse Stretcher Ring PSR-2000”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1691-1693. 
[n]	M. E. Angoletta, S. C. P. Albright, A. Findlay, M. Jaussi, J. C. Molendijk, and N. Pittet, “Upgrade of CERNÔÇÖs PSB Digital Low-Level RF System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3958-3961. doi:10.18429/JACoW-IPAC2019-THPRB068
[n]	C. Lopez Osses et al., “AI-Enabled Adaptive Control of Beam Current in an Isochronous Cyclotron Using GA-Tuned PID”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6342, unpublished. 
[n]	P. G. Bricault et al., “Frontier Technologies and Future Directions in High Intensity ISOL RIB Production”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper MOA01, pp. XX-XX. 
[n]	A. Winter et al., “Bunch Length Measurements at the SLS Linac using Electro-optical Techniques”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOALH01, pp. 253-255. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search