JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX. 
[n]	C. Montag et al., “RHIC Performance as a 100 GeV Polarized Proton Collider in Run-9”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC033, pp. 531-533. 
[n]	D. K. Olsson, ?à. Andersson, and M. Sj?Âstr?Âm, “Trials of Beam-Based Sextupole Calibration through 2nd Order Dispersion”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1551-1553. doi:10.18429/JACoW-IPAC2019-TUPGW064
[n]	M. Panniello, P. Finocchiaro, S. Mallows, A. Pappalardo, and C. P. Welsch, “Characterization of Detectors for Beam Loss Measurements”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG006, pp. 32-34. 
[n]	S. Fartoukh, N. Catalan-Lasheras, and J. P. Koutchouk, “On-Line Monitoring of the Linear Coupling Resonances for the LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB079, pp. 2225-2227. 
[n]	L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183. 
[n]	T. Nishikawa, “Beam Loading Effects in Standing Wave Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-05, pp. 294-302. 
[n]	A. M. Baranov, P. E. Kondrashov, V. P. Petukhov, and I. S. Smirnov, “X-rays Produced by Means of a Proton Beam for Analysis of the Multilayer X-ray Mirrors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP25C, pp. 2455-2457. 
[n]	M. J. Easton, M. Aslaninejad, J. Pasternak, K. J. Peach, J. K. Pozimski, and T. Yokoi, “Injection Layout for PAMELA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP029, pp. 414-416. 
[n]	M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX. 
[n]	J. Campmany et al., “Design of Front End and a 3-Pole-Wiggler as a Photon Source for BEATS Beamline at SESAME”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 324-326. doi:10.18429/JACoW-IPAC2021-MOPAB086
[n]	M. Borland, J. C. Dooling, R. R. Lindberg, V. Sajaev, and A. Xiao, “Using Decoherence to Prevent Damage to the Swap-Out Dump for the APS Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1494-1497. doi:10.18429/JACoW-IPAC2018-TUPMK004
[n]	M. T. Switka, W. Hillert, M. Schedler, and S. Zander, “Streak Camera Imaging at ELSA”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC31, pp. 132-134. 
[n]	G. Devanz et al., “Quarter-wave Cavities for the SPIRAL 2 Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP06, pp. 290-292. 
[n]	I. Sugai et al., “Development of hybrid typoe carbon stripper foils with high durability against 1800K for RCS of J-PARC”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ06, pp. 122-124. 
[n]	R. C. Sethi, B. R. Bairi, P. Junior, S. S. Kapoor, and V. T. Nimje, “Development of an Experimental RFQ Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 593-596. 
[n]	G. M. Wang, Y. Li, J. Rose, T. V. Shaftan, and V. V. Smaluk, “Lossless Crossing of 1/2 Resonance Stopband by Synchrotron Oscillations”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 410-413. doi:10.18429/JACoW-IPAC2019-MOPGW125
[n]	Y. Zhao, S. Huang, M. Yu, L. Peng, X. Gu, and Y. He, “Electromagnetic design of a quadrupole resonator for SRF materials at IMP”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 121-125. doi:10.18429/JACoW-SRF2025-MOP31
[n]	F. Marhauser, R. A. Rimmer, K. Tian, and H. Wang, “Enhanced Method for Cavity Impedance Calculations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP094, pp. 4523-4525. 
[n]	Y. T. Li, C. Y. Liu, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Single-Inductor Bipolar Outputs Power Converters”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3577-3579. doi:10.18429/JACoW-IPAC2017-WEPVA131
[n]	T. Jones, “Operation of PET Cyclotrons for Medical Imaging”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ05T, pp. 252-254. 
[n]	C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1449-1452. 
[n]	E. Allaria et al., “Double Stage Seeded FEL with Fresh Bunch Injection Technique at FERMI”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THIANO01, pp. 723-727. 
[n]	H. Maesaka et al., “Design of the Beam Diagnostic System for the New 3 GeV Light Source in Japan”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 174-178. doi:10.18429/JACoW-IBIC2020-WEPP31
[n]	J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1828-1831. 
[n]	J. Zheng, K. Chin, J. M. J. Madey, and E. Szarmes, “Simulations of the Newark FIR FEL Operation”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS59, pp. XX-XX. 
[n]	S. L. Sheehy et al., “Experimental Studies of Resonance Crossing in Linear Non-scaling FFAGs With the S-POD Plasma Trap”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA072, pp. 2675-2677. 
[n]	B. D. Muratori et al., “Recent Results from the EMMA Experiment”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO054, pp. 1988-1990. 
[n]	B. Schlitt, W. A. Barth, G. Clemente, and W. Vinzenz, “Design Studies for a New Heavy Ion Injector Linac for FAIR”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEC05, pp. 191-195. 
[n]	R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819. 
[n]	W. F. Sheng, H. Liang, Y. S. Lu, and Z. Zhang, “Investigations on Stability Performance of Beamline Optics Supports at BSRF”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 125. doi:10.18429/JACoW-MEDSI2020-TUPA04
[n]	T. D, J. vanZeijts, T. Satogata, J. T. Morris, and B. Frak, “Description of the RHIC Sequencer System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP062, pp. XX-XX. 
[n]	D. Wang et al., “Simulation and Measurement of the Beam Breakup Instability in a W-band Corrugated Structure”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3044-3047. doi:10.18429/JACoW-IPAC2016-WEPOY026
[n]	H. Bluem, M. D. Cole, J. H. Billen, L. M. Young, and P. Greninger, “Measurements on the Frequency Effects and Coupling of Slots and Irises for the APT CCDTL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA78, pp. 3570-3572. 
[n]	S. Saminathan et al., “Design of a Multi-Harmonic Buncher for TRIUMF 500 MeV Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper TUAO04, pp. 118-120. doi:10.18429/JACoW-CYCLOTRONS2022-TUAO04
[n]	D. P. Jin et al., “EXPERIMENTAL BACKGROUND STUDY IN THE BEPCII/BESIII”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH08, pp. XX-XX. 
[n]	M. Omet et al., “Status of the SRF cavity tuner for the MEXT-ATD / ITN cryomodule being built at KEK”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP58, unpublished. 
[n]	T. Toyama et al., “Performance of the Main Ring BPM during the Beam Commissioning at J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE012, pp. 981-983. 
[n]	A. Ferran Pousa, R. W. A?ƒmann, and A. Martinez de la Ossa, “Wake-T: A Fast Particle Tracking Code for Plasma-Based Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3601-3604. doi:10.18429/JACoW-IPAC2019-THPGW012
[n]	M. Justus, I. Koesterke, P. Michel, S. Kraft, U. Schramm, and S. Lenk, “A New PSS for the ELBE Accelerator Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC047, pp. 191-194. 
[n]	T. Becker et al., “Prototype Developement of the BESSY II Storage Ring Magnetic Elements”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP02, pp. 1325-1327. 
[n]	Y. Kang et al., “Electromagnetic Simulations and Properties of the Fundamental Power Couplers for the SNS Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH147, pp. 1122-1124. 
[n]	F. Loyer, F. Daudin, C. Doutressoulles, B. Ducoudret, and J. P. Rataud, “Capacitive Large-Range-Intensity Beam-Position Monitors at GANIL”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1249-1252. 
[n]	M. R. Cleland and P. Farrell, “Dynamitrons of the Future”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 227-235. 
[n]	L. M. Earley, R. Carlini, J. Potter, and H. A. Thiessen, “A High-Q Ferrite-Tuned Cavity”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3460-3463. 
[n]	O. Boine-Frankenheim, “The FAIR Accelerators: Highlights and Challenges”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEYRA01, pp. 2430-2434. 
[n]	M. K. Craddock et al., “TRIUMF KAON Factory Pre-Construction Study”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 450-453. 
[n]	E. Beebe et al., “Results of Beam Tests on a High Current EBIS Test Stand”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA9, pp. 1902-1904. 
[n]	N. Angert, L. Dahl, J. Glatz, J. Klabunde, H. Schulte, and P. Sp?ñdtke, “Two-Ion Time Share Operation of the UNILAC”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-07, pp. 707-709. 
[n]	K. Gubin et al., “High Power Neutron Converter for Low Energy Proton/Deuteron Beams: Present Status”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA122, pp. 274-276. 
[n]	L. Bottura, A. Burns, M. Lamont, L. Vos, and T. Wijnands, “Requirements for Real-time Correction of Decay and Snapback in the LHC Superconducting Magnets”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B03, pp. 367-369. 
[n]	D. Herrup et al., “Real-Time Feedback Control of the Tevatron Tunes and Chromaticities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 898-901. 
[n]	A. Lombardi et al., “Performances of the LEBT of the CERN Lead Ion Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-16, pp. 734-736. 
[n]	C.-C. Kuo, H.-P. Chang, H. C. Chao, P. J. Chou, G.-H. Luo, and H.-J. Tsai, “Progress Report of the TPS Lattice Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP006, pp. 2273-2275. 
[n]	C. Mitsuda et al., “Accelerator Implementing Development of Ceramics Chamber with Integrated Pulsed Magnet for Beam Test”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4164-4166. doi:10.18429/JACoW-IPAC2019-THPTS027
[n]	J. Kuharik et al., “Static Magnetization Properties of AL800 Garnet Material”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4370-4373. doi:10.18429/JACoW-IPAC2017-THPIK116
[n]	M. Okamura et al., “60 mA Carbon Beam Acceleration with DPIS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE031, pp. 2206-2208. 
[n]	S. Lederer et al., “Photocathode Studies at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC072, pp. 232-234. 
[n]	S. Rubio-Manrique, T. Coutinho, R. Su???®, and E. T. Taurel, “Dynamic Attributes and Other Functional Flexibilities of PyTango”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP079, pp. 824-826. 
[n]	J. Bardy, C. Bonnafond, A. Devin, E. Merle, and D. Villate, “Status of AIRIX Alignment and High Current Electron Beam Diagnostics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP011L, pp. 1588-1590. 
[n]	A. M. Lopez Antequera, J. Benavides, J. G. Ramírez Escalona, J. Fernández, and P. Gil, “High-Frequency Beam Position Monitoring: A 500 MHz BPM System by Safran”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WEPMO38, unpublished. 
[n]	N. Kumagai, S. Matsui, J. Ohnishi, K. Tsumaki, and C. Zhang, “Magnet Alignment and Closed Orbit Distortion of the SPring-8 Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP14H, pp. 1356-1358. 
[n]	K. Akai et al., “Quadrupole Counter Mixing Choke Structure for the KEKB ARES Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP048L, pp. 1997-1999. 
[n]	T. Katayama, I. N. Meshkov, and G. V. Trubnikov, “Numerical Investigation of Stochastic Cooling at NICA Collider”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUIOB01, pp. 52-57. 
[n]	M. D. Dohlus and T. L. Limberg, “CSRtrack: Faster Calculation of 3-D CSR Effects”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOCOS05, pp. XX-XX. 
[n]	O. Stein et al., “Investigation of Injection Losses at the Large Hadron Collider with Diamond Based Particle Detectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 310-312. doi:10.18429/JACoW-IPAC2016-MOPMR031
[n]	A. V. Ivanov, M. I. Bryzgunov, A. V. Bubley, V. M. Panasyuk, V. V. Parkhomchuk, and V. B. Reva, “Electron Gun and Collector for 2 Mev Electron Cooler for COSY”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB029, pp. 233-235. 
[n]	F. Lothrop, J. Alonso, R. Miller, and M. Tekawa, “Bevalac Versatility:  Operations Achievements in the Multitasking Mode”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1937-1940. 
[n]	K. Zenker, U. Lehnert, A. E. Rivera Osorio, R. Steinbrück, and M. Kuntzsch, “Wide range low cost digital RF phase shifter”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 546-550. doi:10.18429/JACoW-IBIC2025-TUPMO32
[n]	D. Kostin, A. Goessel, V. Gubarev, W.-D. Moeller, D. Reschke, and K. Twarowski, “Comparison of Field Emission at Different SRF Cavity Assembly States and Test Stands”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO035, pp. 795-797. 
[n]	H. Hitomi, H. Hara, F. Inoue, K. Kanaoka, K. Sennyu, and T. Yanagisawa, “Superconducting Cavity R&D for ILC at MHI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC095, pp. 298-300. 
[n]	A. G. Ruggiero, “Theory of Longitudinal Instability for Bunched Electron and Proton Beams”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1205-1208. 
[n]	A. Sulc, A. Eichler, and T. Wilksen, “Automated anomaly detection on European XFEL klystrons”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3575-3578. doi:10.18429/JACoW-IPAC2024-THPR36
[n]	J. M. Nixon and L. M. Bollinger, “The Liqud Helium System of  ATLAS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 571-574. 
[n]	S. Adam and A. C. Mezger, “Two Dimensional Scans with Adaptive Domain Control”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XI-09, pp. 668-671. 
[n]	T. L. Figueroa et al., “Commissioning Results from the Low-Energy Demonstration Accelerator LEDA Radio-Frequency Quadrupole RFQ”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3A05, pp. 969-971. 
[n]	P. Snopok, G. G. Hanson, and R. B. Palmer, “Simulations of the Tapered Guggenheim 6d Cooling Channel for the Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP059, pp. 217-219. 
[n]	R. Quispe-Abad et al., “Thermal-fluid analysis and operation of a low power water-cooled tilted beam dump at Facility for Rare Isotope Beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3823-3826. doi:10.18429/JACoW-IPAC2024-THPS40
[n]	S. Anami et al., “Design and Construction of Long-Pulse Modulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 2002-2005. 
[n]	G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717. 
[n]	M. Apollonio, R. Bartolini, W. J. Hoffman, A. J. Rose, and A. Thomson, “Progress on Transparent Realignment of the Diamond Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2790-2793. doi:10.18429/JACoW-IPAC2017-WEPAB091
[n]	E. W. Hoffman, “Computer Assistance in Experimental Area Operations at the ZGS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 373-375. 
[n]	N. I. Aizatsky, “On the Theory of Two Coupled Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ22, pp. 1773-1775. 
[n]	M. Krasilnikov, F. Stephan, E. Schneidmiller, and M. V. Yurkov, “Tunable IR/THz Source for Pump Probe Experiments at the European XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD55, pp. 503-506. 
[n]	A. Pepato et al., “Engineering Design and First Prototype Tests of the IFMIF-EVEDA RFQ”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC060, pp. 600-602. 
[n]	S. R. Mane, “Method for Calculating Strong Synchrotron Tune Modulation of Depolarizing Resonances in Storage Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1690-1692. 
[n]	C. Gardner, L. Ahrens, and N. Williams, “Turn-by-Turn Analysis of Proton and Gold Beams at Injection in the AGS Booster”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA79, pp. 2063-2065. 
[n]	A. Filipchenko et al., “Beam Energy Ramping at SIBERIA-2”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP095G, pp. 1426-1428. 
[n]	C. A. J. van der Geer et al., “First Successful Operation of the FUSION FEM”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB03A, pp. 268-272. 
[n]	M. Berndt, C. Guracar, and J. Lipari, “A DC Chopper Used as an Adjustable Current Bypass Shunt”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1273-1277. 
[n]	D. Moffat et al., “Studies on the Nature of Field Emission Sites”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91D02, pp. XX-XX. 
[n]	A. Anoshin, E. Fomin, V. Korchuganov, and S. Tomin, “POSSIBILITY TO REACH THE DIFFRACTION LIMITED X-RAY SOURCE IN KURCHATOV CENTER OF SYNCHROTRON RADIATION”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUBPH03, pp. XX-XX. 
[n]	H. L. Andrews et al., “Experimental Observation of the Evanescent Wave in a Smith-Purcell Free-Electron Laser”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH047, pp. 83-86. 
[n]	J. Butler et al., “Precision Synchrotron Radiation Detectors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1544-1547. 
[n]	J. M. Kim, K. M. Ha, H.-S. Kang, J. H. Kim, and E.-H. Lee, “Improvement of Web-Based Monitoring of EPICS-IOC for PAL Control System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA075, pp. 428-430. 
[n]	R. Kowalewicz et al., “Performance of the CERN Plasma Lens in Laboratory and Beam Tests at the Antiproton Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2631-2634. 
[n]	J. M. Bogaty, B. E. Clifft, and R. C. Pardo, “A Very Wide Bandwidth Faraday Cup Suitable for Measuring Gigahertz Structure on Ion Beams with Velocities Down to < 0.01”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU457, pp. 465-467. 
[n]	H. Dewa et al., “Recent Progress of Laser Wakefield Acceleration Experiments at KEK/U. TOKYO/JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP04D, pp. 809-811. 
[n]	J.-C. Chang, J.-R. Chen, Y.-C. Lin, Y.-H. Liu, and Z.-D. Tsai, “Utility Design for the 3GeV TPS Electron Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC127, pp. 1365-1367. 
[n]	A. Gomes de Oliveira-Filho, G. Ascenção, S. Luiz, and J. Vieira, “XBPM calibration and simulations at SIRIUS”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6344, unpublished. 
[n]	F. Liu et al., “Ground Vibration Measurements and Analysis for the SHINE Project”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUPA07, pp. XX-XX. 
[n]	S. Lidia, “The RTA Betatron-Node Experiment: Limiting Cumulative BBU Growth In A Linear Periodic System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB15, pp. 470-472. 
[n]	F. H. O et al., “Progress in the Development of Textured Dysprosium for Undulator Applications”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC36, pp. 1217-1219. 
[n]	R. De Prisco et al., “Influence of the Cavity Field Flatness and Effect of the Phase Reference Line Errors on the Beam Dynamics of the ESS Linac”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 377-382. doi:10.18429/JACoW-HB2018-THP2WB03
[n]	A. Mondelli and D. Chernin, “Design Constraints for Electron-Positron Linear Colliders”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH451, pp. 730-732. 
[n]	C. Benvenuti, R. Calder, and N. Hilleret, “A Vacuum Cold Bore Test Section at the Cern ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1373-1376. 
[n]	E. B. Holzer et al., “Design of the Beam Loss Monitoring System for the LHC Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT012, pp. 2487-2489. 
[n]	J.-L. Biarrotte et al., “Commissioning of the MAX 700 MHz Test Stand”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP080, pp. 610-612. 
[n]	A. H. Lumpkin, V. E. Scarpine, and G. R. Tassotto, “Initial Far-Field OTR Images Generated by 120-GeV Protons at FNAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN113, pp. 4378-4380. 
[n]	A. Samadli et al., “Evolution of Control System and PLC Integration at the European XFEL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1354-1357. doi:10.18429/JACoW-ICALEPCS2023-THPDP023
[n]	V. E. Scarpine et al., “The Fermilab HINS Test Facility and Beam Measurements of the Ion Source and 325 MHz RFQ”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUOA03, pp. 283-285. 
[n]	I. I. Degtyarev, Yu. S. Fedotov, A. E. Lokhovitskii, and I. A. Yazynin, “Substance Choice of the Scraper System Elements”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P120, pp. 255-257. 
[n]	P. Gladkikh et al., “Adjustment and Improvement of 100 MeV/100 kW Electron Linear Accelerator Parameters for the NSC KIPT SCA Neutron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2200-2202. doi:10.18429/JACoW-IPAC2019-TUPTS116
[n]	P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442. 
[n]	N. Bidault, M. L. Lozano, and J. A. Rodriguez, “Residual Gas Ions Characterization from the REXEBIS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 784-786. doi:10.18429/JACoW-IPAC2018-TUPAF041
[n]	T. Brown et al., “Automation upgrade of the CXLS photoinjector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3275-3277. doi:10.18429/JACoW-IPAC2024-THPG14
[n]	L. Bagge et al., “The Vacuum System of CRYRING”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1570-1573. 
[n]	Z. A. Conway et al., “Cryomodule Designs for Superconducting Half-Wave Resonators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB068, pp. 627-629. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search