Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX.
[n] C. Montag et al., “RHIC Performance as a 100 GeV Polarized Proton Collider in Run-9”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC033, pp. 531-533.
[n] D. K. Olsson, ?à. Andersson, and M. Sj?Âstr?Âm, “Trials of Beam-Based Sextupole Calibration through 2nd Order Dispersion”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1551-1553. doi:10.18429/JACoW-IPAC2019-TUPGW064
[n] M. Panniello, P. Finocchiaro, S. Mallows, A. Pappalardo, and C. P. Welsch, “Characterization of Detectors for Beam Loss Measurements”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG006, pp. 32-34.
[n] S. Fartoukh, N. Catalan-Lasheras, and J. P. Koutchouk, “On-Line Monitoring of the Linear Coupling Resonances for the LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB079, pp. 2225-2227.
[n] L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183.
[n] T. Nishikawa, “Beam Loading Effects in Standing Wave Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VI-05, pp. 294-302.
[n] A. M. Baranov, P. E. Kondrashov, V. P. Petukhov, and I. S. Smirnov, “X-rays Produced by Means of a Proton Beam for Analysis of the Multilayer X-ray Mirrors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP25C, pp. 2455-2457.
[n] M. J. Easton, M. Aslaninejad, J. Pasternak, K. J. Peach, J. K. Pozimski, and T. Yokoi, “Injection Layout for PAMELA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP029, pp. 414-416.
[n] M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX.
[n] J. Campmany et al., “Design of Front End and a 3-Pole-Wiggler as a Photon Source for BEATS Beamline at SESAME”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 324-326. doi:10.18429/JACoW-IPAC2021-MOPAB086
[n] M. Borland, J. C. Dooling, R. R. Lindberg, V. Sajaev, and A. Xiao, “Using Decoherence to Prevent Damage to the Swap-Out Dump for the APS Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1494-1497. doi:10.18429/JACoW-IPAC2018-TUPMK004
[n] M. T. Switka, W. Hillert, M. Schedler, and S. Zander, “Streak Camera Imaging at ELSA”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC31, pp. 132-134.
[n] G. Devanz et al., “Quarter-wave Cavities for the SPIRAL 2 Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP06, pp. 290-292.
[n] I. Sugai et al., “Development of hybrid typoe carbon stripper foils with high durability against 1800K for RCS of J-PARC”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ06, pp. 122-124.
[n] R. C. Sethi, B. R. Bairi, P. Junior, S. S. Kapoor, and V. T. Nimje, “Development of an Experimental RFQ Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 593-596.
[n] G. M. Wang, Y. Li, J. Rose, T. V. Shaftan, and V. V. Smaluk, “Lossless Crossing of 1/2 Resonance Stopband by Synchrotron Oscillations”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 410-413. doi:10.18429/JACoW-IPAC2019-MOPGW125
[n] Y. Zhao, S. Huang, M. Yu, L. Peng, X. Gu, and Y. He, “Electromagnetic design of a quadrupole resonator for SRF materials at IMP”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 121-125. doi:10.18429/JACoW-SRF2025-MOP31
[n] F. Marhauser, R. A. Rimmer, K. Tian, and H. Wang, “Enhanced Method for Cavity Impedance Calculations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP094, pp. 4523-4525.
[n] Y. T. Li, C. Y. Liu, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Single-Inductor Bipolar Outputs Power Converters”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3577-3579. doi:10.18429/JACoW-IPAC2017-WEPVA131
[n] T. Jones, “Operation of PET Cyclotrons for Medical Imaging”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ05T, pp. 252-254.
[n] C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
[n] E. Allaria et al., “Double Stage Seeded FEL with Fresh Bunch Injection Technique at FERMI”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper THIANO01, pp. 723-727.
[n] H. Maesaka et al., “Design of the Beam Diagnostic System for the New 3 GeV Light Source in Japan”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 174-178. doi:10.18429/JACoW-IBIC2020-WEPP31
[n] J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1828-1831.
[n] J. Zheng, K. Chin, J. M. J. Madey, and E. Szarmes, “Simulations of the Newark FIR FEL Operation”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS59, pp. XX-XX.
[n] S. L. Sheehy et al., “Experimental Studies of Resonance Crossing in Linear Non-scaling FFAGs With the S-POD Plasma Trap”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA072, pp. 2675-2677.
[n] B. D. Muratori et al., “Recent Results from the EMMA Experiment”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO054, pp. 1988-1990.
[n] B. Schlitt, W. A. Barth, G. Clemente, and W. Vinzenz, “Design Studies for a New Heavy Ion Injector Linac for FAIR”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEC05, pp. 191-195.
[n] R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
[n] W. F. Sheng, H. Liang, Y. S. Lu, and Z. Zhang, “Investigations on Stability Performance of Beamline Optics Supports at BSRF”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 125. doi:10.18429/JACoW-MEDSI2020-TUPA04
[n] T. D, J. vanZeijts, T. Satogata, J. T. Morris, and B. Frak, “Description of the RHIC Sequencer System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP062, pp. XX-XX.
[n] D. Wang et al., “Simulation and Measurement of the Beam Breakup Instability in a W-band Corrugated Structure”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3044-3047. doi:10.18429/JACoW-IPAC2016-WEPOY026
[n] H. Bluem, M. D. Cole, J. H. Billen, L. M. Young, and P. Greninger, “Measurements on the Frequency Effects and Coupling of Slots and Irises for the APT CCDTL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA78, pp. 3570-3572.
[n] S. Saminathan et al., “Design of a Multi-Harmonic Buncher for TRIUMF 500 MeV Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper TUAO04, pp. 118-120. doi:10.18429/JACoW-CYCLOTRONS2022-TUAO04
[n] D. P. Jin et al., “EXPERIMENTAL BACKGROUND STUDY IN THE BEPCII/BESIII”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH08, pp. XX-XX.
[n] M. Omet et al., “Status of the SRF cavity tuner for the MEXT-ATD / ITN cryomodule being built at KEK”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP58, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX.
- C. Montag et al., “RHIC Performance as a 100 GeV Polarized Proton Collider in Run-9”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC033, pp. 531-533.
- D. K. Olsson, ?à. Andersson, and M. Sj?Âstr?Âm, “Trials of Beam-Based Sextupole Calibration through 2nd Order Dispersion”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1551-1553.
- M. Panniello, P. Finocchiaro, S. Mallows, A. Pappalardo, and C. P. Welsch, “Characterization of Detectors for Beam Loss Measurements”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG006, pp. 32-34.
- S. Fartoukh, N. Catalan-Lasheras, and J. P. Koutchouk, “On-Line Monitoring of the Linear Coupling Resonances for the LHC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB079, pp. 2225-2227.
- L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183.
- T. Nishikawa, “Beam Loading Effects in Standing Wave Linacs”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VI-05, pp. 294-302.
- A. M. Baranov, P. E. Kondrashov, V. P. Petukhov, and I. S. Smirnov, “X-rays Produced by Means of a Proton Beam for Analysis of the Multilayer X-ray Mirrors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP25C, pp. 2455-2457.
- M. J. Easton, M. Aslaninejad, J. Pasternak, K. J. Peach, J. K. Pozimski, and T. Yokoi, “Injection Layout for PAMELA”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP029, pp. 414-416.
- M. Stettler, L. Day, and J. Power, “PC based Instrumentation, Current Efforts and Future Technology”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU102, pp. XX-XX.
- J. Campmany et al., “Design of Front End and a 3-Pole-Wiggler as a Photon Source for BEATS Beamline at SESAME”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 324-326.
- M. Borland, J. C. Dooling, R. R. Lindberg, V. Sajaev, and A. Xiao, “Using Decoherence to Prevent Damage to the Swap-Out Dump for the APS Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1494-1497.
- M. T. Switka, W. Hillert, M. Schedler, and S. Zander, “Streak Camera Imaging at ELSA”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC31, pp. 132-134.
- G. Devanz et al., “Quarter-wave Cavities for the SPIRAL 2 Project”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP06, pp. 290-292.
- I. Sugai et al., “Development of hybrid typoe carbon stripper foils with high durability against 1800K for RCS of J-PARC”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAZ06, pp. 122-124.
- R. C. Sethi, B. R. Bairi, P. Junior, S. S. Kapoor, and V. T. Nimje, “Development of an Experimental RFQ Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 593-596.
- G. M. Wang, Y. Li, J. Rose, T. V. Shaftan, and V. V. Smaluk, “Lossless Crossing of 1/2 Resonance Stopband by Synchrotron Oscillations”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 410-413.
- Y. Zhao, S. Huang, M. Yu, L. Peng, X. Gu, and Y. He, “Electromagnetic design of a quadrupole resonator for SRF materials at IMP”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 121-125.
- F. Marhauser, R. A. Rimmer, K. Tian, and H. Wang, “Enhanced Method for Cavity Impedance Calculations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP094, pp. 4523-4525.
- Y. T. Li, C. Y. Liu, K.-B. Liu, B. S. Wang, and Y. S. Wong, “Single-Inductor Bipolar Outputs Power Converters”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3577-3579.
- T. Jones, “Operation of PET Cyclotrons for Medical Imaging”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEZ05T, pp. 252-254.
- C. M. Ankenbrandt, J. E. Griffin, R. P. Johnson, J. Lackey, and K. Meisner, “Longitudinal Motion of the Beam in the Fermilab Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1449-1452.
- E. Allaria et al., “Double Stage Seeded FEL with Fresh Bunch Injection Technique at FERMI”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper THIANO01, pp. 723-727.
- H. Maesaka et al., “Design of the Beam Diagnostic System for the New 3 GeV Light Source in Japan”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 174-178.
- J. B. Murphy et al., “The Brookhaven Superconducting X-Ray Lithography Source (SXLS)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1828-1831.
- J. Zheng, K. Chin, J. M. J. Madey, and E. Szarmes, “Simulations of the Newark FIR FEL Operation”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS59, pp. XX-XX.
- S. L. Sheehy et al., “Experimental Studies of Resonance Crossing in Linear Non-scaling FFAGs With the S-POD Plasma Trap”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA072, pp. 2675-2677.
- B. D. Muratori et al., “Recent Results from the EMMA Experiment”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO054, pp. 1988-1990.
- B. Schlitt, W. A. Barth, G. Clemente, and W. Vinzenz, “Design Studies for a New Heavy Ion Injector Linac for FAIR”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEC05, pp. 191-195.
- R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819.
- W. F. Sheng, H. Liang, Y. S. Lu, and Z. Zhang, “Investigations on Stability Performance of Beamline Optics Supports at BSRF”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 125.
- T. D, J. vanZeijts, T. Satogata, J. T. Morris, and B. Frak, “Description of the RHIC Sequencer System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP062, pp. XX-XX.
- D. Wang et al., “Simulation and Measurement of the Beam Breakup Instability in a W-band Corrugated Structure”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3044-3047.
- H. Bluem, M. D. Cole, J. H. Billen, L. M. Young, and P. Greninger, “Measurements on the Frequency Effects and Coupling of Slots and Irises for the APT CCDTL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA78, pp. 3570-3572.
- S. Saminathan et al., “Design of a Multi-Harmonic Buncher for TRIUMF 500 MeV Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper TUAO04, pp. 118-120.
- D. P. Jin et al., “EXPERIMENTAL BACKGROUND STUDY IN THE BEPCII/BESIII”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH08, pp. XX-XX.
- M. Omet et al., “Status of the SRF cavity tuner for the MEXT-ATD / ITN cryomodule being built at KEK”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP58, unpublished.
Back to search