JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. David, V. Schlott, and A. Jaggi, “A Zone Plate Based Beam Monitor for the Swiss Light Source”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS13, pp. XX-XX. 
[n]	K. Howard, D. Bafia, Z.-H. Sung, W. Dziedzic-Misiewicz, and Y.-K. Kim, “Microscopic understanding of the effects of impurities in low RRR SRF cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 828-831. doi:10.18429/JACoW-LINAC2024-THPB099
[n]	M. Konrad et al., “Design and Commissioning of a Multi-frequency Digital Low Level RF Control System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC151, pp. 433-435. 
[n]	T. Wagner and J. Pretz, “Beam-based Alignment at the Cooler Syncrotron (COSY)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3632-3634. doi:10.18429/JACoW-IPAC2019-THPGW024
[n]	C. Montag et al., “The 2015 eRHIC Ring-Ring Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3126-3128. doi:10.18429/JACoW-IPAC2016-WEPOY057
[n]	X. Zhao, G. Ciovati, C. E. Reece, and A. T. Wu, “Surface Topography of Hotspot" Regions from a Single Cell SRF Cavity"”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP062, pp. 2147-2149. 
[n]	B. W. Allardyce et al., “ISOLDC:PAC A New Client for the CERN PS Booster”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 583-586. 
[n]	Q. Qin et al., “Luminosity Enhancement and Performance in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ012, pp. 3708-3710. 
[n]	G. D'Auria, M. B. Danailov, M. Ferrario, N. Piovella, C. Rossi, and L. Serafini, “The FABRE Project:  Design and Construction of an Integrated Photo-Injector for Bright Electron Beam Production”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B16, pp. 1681-1683. 
[n]	A. I. Wawrzyniak et al., “First Results of Solaris Synchrotron Commissioning”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 602-605. doi:10.18429/JACoW-IBIC2015-WEDLA01
[n]	V. Ptitsyn et al., “High Luminosity Electron-hadron Collider eRHIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ019, pp. 3726-3728. 
[n]	J. R. Cary, R. E. Giacone, and K. Sonnad, “Halo Formation in an Intense Charged Particle Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B07, pp. 1564-1565. 
[n]	P. Spiller et al., “The GSI Synchrotron Facility Proposal for Acceleration of High Intensity Ion and Proton Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA006, pp. 589-591. 
[n]	Z. Dzwigalski and Z. Zimek, “LAE 10  Electron  Accelerator  Charge  Monitor”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI053, pp. 1879-1881. 
[n]	Y. Zhu, S. Hulbert, M. Idir, I. Jarrige, S. O, and E. Vescovo, “Engineering Design and Commissioning Performance of the ESM and Six Soft X-Ray Beamlines at NSLS-II”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 435-439. doi:10.18429/JACoW-MEDSI2018-FROAMA05
[n]	Q. Wu and I. Ben-Zvi, “Optimization of Higher Order Mode Dampers in the 56 MHz SRF Cavity for RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC086, pp. 3081-3083. 
[n]	K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279. 
[n]	H. Schmickler Geneva, “Industrial Products for Beam Instrumentation”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper DS03, pp. XX-XX. 
[n]	L. R. Evans, “LHC Status and Plans”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B004, pp. 61-65. 
[n]	S. A. Macdonell, “Application of Industry Recognised Development Tools and Methodologies, such as Six Sigma to Facilitate the Efficient Delivery of Innovative and Robust Engineering Solutions at Synchrotron Facilities”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 184-188. doi:10.18429/JACoW-MEDSI2018-WEOPMA05
[n]	J. Angot, T. Lamy, M. Marie-Jeanne, P. Sortais, and T. Thuillier, “LPSC PHOENIX ECR Charge Breeder Beam Optics and Efficiencies”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THYO02, pp. 167-171. 
[n]	H. Podlech et al., “General Layout of the 17 MeV Injector for MYRRHA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS039, pp. 2574-2576. 
[n]	D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1930-1933. doi:10.18429/JACoW-IPAC2018-WEPAF050
[n]	O. A. Plotnikova, V. Y. Chudaev, and S. E. Karnaev, “Application of VEPP-4M Database for Analysis Radiation Resistance of Temperature Sensors on Base DS1631Z”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP034, pp. XX-XX. 
[n]	R. W. Chasman, E. D. Courant, and M. Month, “Effects in Low Periodicity Lattices Resulting from Low beta Insertions”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1429-1433. 
[n]	X. Xu, J. Chen, and L. He, “The radiation monitoring system for Super Tau Charm Facility - Beam Test Platform”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB115, unpublished. 
[n]	J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 266-269. 
[n]	A. Mosnier et al., “The Probe Beam Linac in CTF3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS059, pp. 679-681. 
[n]	U. Schryber et al., “Invited Paper: High Power Operation of the PSI-Accelerators”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-01, pp. 32-38. 
[n]	J. L. Shaw, C. Joshi, K. A. Marsh, and N. Vafaei-Najafabadi, “Technique for Determining the Maximum Energy of a Dispersed Electron Beam from Laser Wakefield Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC45, pp. 162-164. 
[n]	A. Savalle, P. Gillette, C. Leboucher, E. L?®corch?®, E. Lemaitre, and M.-H. Moscatello, “Automatic Beam Tuning at GANIL”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-03, pp. 560-563. 
[n]	L. L. Guan et al., “Magnetic Field Measurement and Shimming for a Medical Compact Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 48-50. doi:10.18429/JACoW-CYCLOTRONS2019-MOP011
[n]	Y. Zhang, H. B. Chen, Q. Gao, and J. Shi, “THEORY RESEARCH ON APPLICATION OF CT TECHNOLOGY TO SHIELDED NUCLEAR MATERIAL DISCRIMINATION”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA019, pp. 3669-3671. 
[n]	H. Nakagawa, A. Akiyama, Y. Kato, and J.-I. Odagiri, “The Accelerator Protection System Based on Embedded EPICS for J-PARC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC006, pp. 406-408. 
[n]	G. J. Silvi et al., “Dynamics studies for advanced-compact and high repetition rate C-band injector for PWFA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS112, unpublished. 
[n]	J. S. Lilley et al., “Development of Aluminium-26 as a Tracer for Biological Research”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1669-1672. 
[n]	C. C. Hall et al., “Coherent Synchrotron Radiation in Energy Recovery Linacs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2387-2389. doi:10.18429/JACoW-IPAC2015-WEXB1
[n]	I. G. Brown, J. E. Galvin, and R. A. MacGill, “Multi-Ampere Metal Ion Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 289-292. 
[n]	H. Delsim-Hashemi and K. Floettmann, “Dark Current Studies at Relativistic Electron Gun for Atomic Exploration ÔÇô REGAE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 649-651. doi:10.18429/JACoW-IPAC2014-MOPRI027
[n]	G. De Michele and A. Grudiev, “Analysis of Long-range Wakefields in CLIC Main Linac Accelerating Structures with Damping Loads”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR077, pp. 3111-3113. 
[n]	R. Alemany-Fernandez et al., “Performance of the CERN Injector Complex and Transmission Studies into the LHC during the Second Proton-Lead Run”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2395-2398. doi:10.18429/JACoW-IPAC2017-TUPVA128
[n]	Y. Wang, A. H. Regan, T. S. Rohlev, M. Prokop, and D. Thomson, “SNS Superconducting Cavity Modeling: Iterative Learning Control”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC13, pp. 521-523. 
[n]	R. Robles et al., “Coherent spectrotemporal shaping of fresh slice attosecond X-ray free-electron lasers”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG62, unpublished. 
[n]	S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 413-416. doi:10.18429/JACoW-ICALEPCS2015-MOPGF140
[n]	R. Veness et al., “Development of a Beam-Gas Curtain Profile Monitor for the High Luminosity Upgrade of the LHC”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 472-476. doi:10.18429/JACoW-IBIC2018-WEPB16
[n]	H. Shen et al., “Design and conditioning of a low thermal load coupler for conduction-cooled accelerators”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 215-220. doi:10.18429/JACoW-SRF2025-MOP62
[n]	E. Nebot Del Busto et al., “Position Resolution of Optical Fibre-Based Beam Loss Monitors Using Long Electron Pulses”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 580-584. doi:10.18429/JACoW-IBIC2015-WEBLA03
[n]	S. Dutta et al., “Mechanical Coupling between the LHC Cryogenic Distribution Line and the Short Straight Section housing the Superconducting Quadrupole.Theoretical Analysis and Experimental Validation”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA085, pp. 758-760. 
[n]	L. S. Cowie et al., “Frequency Measurement and Tuning of a 9-Cell Superconducting Cavity Developed with UK Industry”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB033, pp. 1158-1161. 
[n]	J. L. Steinmann, M. Brosi, E. Br??ndermann, A. Mochihashi, A.-S. M??ller, and P. Schreiber, “Towards Direct Detection of the Shape of CSR  Pulses with Fast THz Detectors”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2190-2192. doi:10.18429/JACoW-IPAC2022-WEPOTK057
[n]	A. S. Parfenova, G. Franchetti, and I. Hofmann, “Measuring Ring Nonlinear Components via Induced Linear Feed-down""”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC066, pp. 3137-3139. 
[n]	Y. J. Pei et al., “Commissioning of the Compact 14MeV LINAC for an FEL-Based THz Source”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 509-511. doi:10.18429/JACoW-LINAC2016-TUPLR020
[n]	D. Rubin and A. Schick, “Single Interaction Point Operation of CESR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 144-147. 
[n]	Y.-M. Shin et al., “Ultra-high Gradient Acceleration in Nano-crystal Channels”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1607-1610. doi:10.18429/JACoW-IPAC2016-TUPMY028
[n]	D. J. Seal et al., “A Low Power Test Facility for SRF Thin Film Testing with High Sample Throughput Rate”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 100. doi:10.18429/JACoW-SRF2021-SUPFDV016
[n]	A. Toyoda et al., “Development of Radiation Registant Optics System for High Intensity Proton Beamline at the J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE024, pp. 1017-1019. 
[n]	D. M. Gassner et al., “Design Status of the Electron-Ion Collider Beam Instrumentation”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP012, unpublished. 
[n]	K. Siemek et al., “Realization of Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 496-498. doi:10.18429/JACoW-RUPAC2016-WEPSB059
[n]	A. Bertarelli et al., “First Results of an Experiment on Advanced Collimator Materials at CERN HiRadMat Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI046, pp. 3391-3393. 
[n]	F. Orsini et al., “Vertical Tests Results of the IFMIF Cavity Prototypes and Cryomodule Development”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THIOB02, pp. 667-673. 
[n]	T. Naito and T. M. Mitsuhashi, “YAG:Ce Screen Monitor Using a Gated CCD Camera”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD08, pp. 426-429. 
[n]	M. Bertucci et al., “Development of High-Q Treatments for PIP-II Prototype Cavities at LASA-INFN”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 820. doi:10.18429/JACoW-SRF2021-THPCAV014
[n]	A. Bourdier, J. Valat, and M. Valentini, “Study of the Dynamics of a Particle in a Constant Homogeneous Magnetic Field and a Transverse Homogeneous Rotating Electric Field in the Development of an X-Ray Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP015L, pp. 899-901. 
[n]	S.V.Akulinichev, L.V.Kravchuk, V.A.Matveev, “RADIOLOGICAL CENTRE BASED ON INR PROTON LINAC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper FRJO02, pp. XX-XX. 
[n]	P. Krkotic et al., “RF characterisation of laser treated copper surfaces for the mitigation of electron cloud in accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4275-4278. doi:10.18429/JACoW-IPAC2023-THPA137
[n]	J. Liu et al., “High-Power Test of a Compact X-Band RF Rotary Joint”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4017-4019. doi:10.18429/JACoW-IPAC2018-THPAL156
[n]	T. Chen and S. Peggs, “The Driven Pendulum, and E778 Tune Modulation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1343-1346. 
[n]	N. Sei, H. Ogawa, K. Y. Yamada, and M. Y. Yasumoto, “Project of Infrared Storage Ring Free Electron Lasers at AIST”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA037, pp. 160-162. 
[n]	S. Posen, “Efforts Towards First Applications of Nb3Sn SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper FROFDV05, pp.. 
[n]	P. Gurd, F. Casagrande, M. McCarthy, W. H. Strong, and V. Ganni, “The Development of Automatic Sequences for the RF and Cryogenic Systems at the Spallation Neutron Source”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_014. 
[n]	I. N. Meshkov, “New advances in beam cooling”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAY01, pp. 162-166. 
[n]	S. Liu, W. Decking, and F. Wolff-Fabris, “Study of Possible Beam Losses After Post-Linac Collimation at European XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4092-4095. doi:10.18429/JACoW-IPAC2018-THPMF022
[n]	H. Bongers et al., “Properties of the Front Part of the REX-ISOLDE Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B02, pp. 809-811. 
[n]	R. J. Pasquinelli et al., “Stacktail Momentum Cooling in the Fermilab Antiproton Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1132-1135. 
[n]	J. Boyer et al., “Design validation and alignment assesment of the girder prototypes for the ALBA II storage ring”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7189, unpublished. 
[n]	J. Branlard et al., “RF Operation Experience at the European XFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 109-111. doi:10.18429/JACoW-LINAC2018-MOPO038
[n]	J. Tuckmantel, “Digital Generation of Noise-signals with Arbitrary Constant or Time-varying Spectra”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC103, pp. 1299-1301. 
[n]	X. P. Ma, Y. L. Chi, R. L. Liu, and S. Shu, “Design and Test of Prototype of LLRF System for KIPT Neutron Source LINAC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 959-961. doi:10.18429/JACoW-IPAC2015-MOPTY012
[n]	T. Chen, W. Li, Y. J. Pei, and Zh. X. Tang, “Physics design and dynamic simulation of a C-band photocathode electron gun for UEM”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 90-93. doi:10.18429/JACoW-LINAC2018-MOPO029
[n]	K. E. Nichols et al., “Diamond Field Emitter Array Cathode Experimental Tests in RF Gun”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 618-621. doi:10.18429/JACoW-NAPAC2019-WEYBA5
[n]	S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381. 
[n]	M. Kimura et al., “Beam test of C-band Compact accelerating structure made of longitudinally-split two halves”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7627, unpublished. 
[n]	D. Sauerland and W. Hillert, “Numerical and Experimental Substantiation of the Ion Density Beam Transfer Function Measurements”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 698-700. doi:10.18429/JACoW-IPAC2016-MOPOR047
[n]	K. Hosoyama, K. Akai, S. Yamaguchi, E. E. Burkhardt, K. Saito, and Y. Yamazaki, “Superconducting Solenoid Package Prototyping for FRIB SRF Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2886-2888. doi:10.18429/JACoW-IPAC2015-WEPMA051
[n]	J. W. Lewellen et al., “The Advanced Photon Source Injector Test Stand”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH054, pp. 2212-2214. 
[n]	K. Renuka et al., “Transverse Beam Profile Monitoring using Scintillation Screens for High Energy Ion Beams”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG022, pp. 183-185. 
[n]	P. Anthouard et al., “The Progress of AIRIX at CESTA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 722-725. 
[n]	E. Bjorklund, “Toward a General Theory of Control Knobs”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP071, pp. XX-XX. 
[n]	S. R. Marques et al., “Status of the Sirius RF BPM Electronics”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WECYB3, pp. 505-509. 
[n]	D. Kayran et al., “Beam Commissioning Results From the R&D ERL at BNL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 374-379. doi:10.18429/JACoW-LINAC2016-TU3A01
[n]	R. Hardekopf et al., “Completion of CCL Hot Model for SNS-Linac R&D Program”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG017, pp. 1461-1463. 
[n]	A. V. Bogomyagkov, E. B. Levichev, and P. A. Piminov, “Low Emittance Lattice Cell with Large Dynamic Aperture”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 99-101. doi:10.18429/JACoW-IPAC2014-MOPRO017
[n]	S. P. Kearney, E. M. Dufresne, S. Narayanan, A. Sandy, and D. Shu, “Mechanical Conversion of a Vertically Reflecting Artificial Channel-cut Monochromator to Horizontally Reflecting”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 391-393. doi:10.18429/JACoW-MEDSI2018-THPH26

For LaTeX

Use Complete Form

For BibTeX

References

Back to search