Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. David, V. Schlott, and A. Jaggi, “A Zone Plate Based Beam Monitor for the Swiss Light Source”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS13, pp. XX-XX.
[n] K. Howard, D. Bafia, Z.-H. Sung, W. Dziedzic-Misiewicz, and Y.-K. Kim, “Microscopic understanding of the effects of impurities in low RRR SRF cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 828-831. doi:10.18429/JACoW-LINAC2024-THPB099
[n] M. Konrad et al., “Design and Commissioning of a Multi-frequency Digital Low Level RF Control System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC151, pp. 433-435.
[n] T. Wagner and J. Pretz, “Beam-based Alignment at the Cooler Syncrotron (COSY)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3632-3634. doi:10.18429/JACoW-IPAC2019-THPGW024
[n] C. Montag et al., “The 2015 eRHIC Ring-Ring Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3126-3128. doi:10.18429/JACoW-IPAC2016-WEPOY057
[n] X. Zhao, G. Ciovati, C. E. Reece, and A. T. Wu, “Surface Topography of Hotspot" Regions from a Single Cell SRF Cavity"”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP062, pp. 2147-2149.
[n] B. W. Allardyce et al., “ISOLDC:PAC A New Client for the CERN PS Booster”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 583-586.
[n] Q. Qin et al., “Luminosity Enhancement and Performance in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ012, pp. 3708-3710.
[n] G. D'Auria, M. B. Danailov, M. Ferrario, N. Piovella, C. Rossi, and L. Serafini, “The FABRE Project: Design and Construction of an Integrated Photo-Injector for Bright Electron Beam Production”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B16, pp. 1681-1683.
[n] A. I. Wawrzyniak et al., “First Results of Solaris Synchrotron Commissioning”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 602-605. doi:10.18429/JACoW-IBIC2015-WEDLA01
[n] V. Ptitsyn et al., “High Luminosity Electron-hadron Collider eRHIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ019, pp. 3726-3728.
[n] J. R. Cary, R. E. Giacone, and K. Sonnad, “Halo Formation in an Intense Charged Particle Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B07, pp. 1564-1565.
[n] P. Spiller et al., “The GSI Synchrotron Facility Proposal for Acceleration of High Intensity Ion and Proton Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA006, pp. 589-591.
[n] Z. Dzwigalski and Z. Zimek, “LAE 10 Electron Accelerator Charge Monitor”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI053, pp. 1879-1881.
[n] Y. Zhu, S. Hulbert, M. Idir, I. Jarrige, S. O, and E. Vescovo, “Engineering Design and Commissioning Performance of the ESM and Six Soft X-Ray Beamlines at NSLS-II”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 435-439. doi:10.18429/JACoW-MEDSI2018-FROAMA05
[n] Q. Wu and I. Ben-Zvi, “Optimization of Higher Order Mode Dampers in the 56 MHz SRF Cavity for RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC086, pp. 3081-3083.
[n] K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279.
[n] H. Schmickler Geneva, “Industrial Products for Beam Instrumentation”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper DS03, pp. XX-XX.
[n] L. R. Evans, “LHC Status and Plans”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B004, pp. 61-65.
[n] S. A. Macdonell, “Application of Industry Recognised Development Tools and Methodologies, such as Six Sigma to Facilitate the Efficient Delivery of Innovative and Robust Engineering Solutions at Synchrotron Facilities”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 184-188. doi:10.18429/JACoW-MEDSI2018-WEOPMA05
[n] J. Angot, T. Lamy, M. Marie-Jeanne, P. Sortais, and T. Thuillier, “LPSC PHOENIX ECR Charge Breeder Beam Optics and Efficiencies”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THYO02, pp. 167-171.
[n] H. Podlech et al., “General Layout of the 17 MeV Injector for MYRRHA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS039, pp. 2574-2576.
[n] D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1930-1933. doi:10.18429/JACoW-IPAC2018-WEPAF050
[n] O. A. Plotnikova, V. Y. Chudaev, and S. E. Karnaev, “Application of VEPP-4M Database for Analysis Radiation Resistance of Temperature Sensors on Base DS1631Z”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP034, pp. XX-XX.
[n] R. W. Chasman, E. D. Courant, and M. Month, “Effects in Low Periodicity Lattices Resulting from Low beta Insertions”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1429-1433.
[n] X. Xu, J. Chen, and L. He, “The radiation monitoring system for Super Tau Charm Facility - Beam Test Platform”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB115, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- C. David, V. Schlott, and A. Jaggi, “A Zone Plate Based Beam Monitor for the Swiss Light Source”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS13, pp. XX-XX.
- K. Howard, D. Bafia, Z.-H. Sung, W. Dziedzic-Misiewicz, and Y.-K. Kim, “Microscopic understanding of the effects of impurities in low RRR SRF cavities”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 828-831.
- M. Konrad et al., “Design and Commissioning of a Multi-frequency Digital Low Level RF Control System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC151, pp. 433-435.
- T. Wagner and J. Pretz, “Beam-based Alignment at the Cooler Syncrotron (COSY)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3632-3634.
- C. Montag et al., “The 2015 eRHIC Ring-Ring Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3126-3128.
- X. Zhao, G. Ciovati, C. E. Reece, and A. T. Wu, “Surface Topography of Hotspot" Regions from a Single Cell SRF Cavity"”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP062, pp. 2147-2149.
- B. W. Allardyce et al., “ISOLDC:PAC A New Client for the CERN PS Booster”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 583-586.
- Q. Qin et al., “Luminosity Enhancement and Performance in BEPCII”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ012, pp. 3708-3710.
- G. D'Auria, M. B. Danailov, M. Ferrario, N. Piovella, C. Rossi, and L. Serafini, “The FABRE Project: Design and Construction of an Integrated Photo-Injector for Bright Electron Beam Production”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B16, pp. 1681-1683.
- A. I. Wawrzyniak et al., “First Results of Solaris Synchrotron Commissioning”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 602-605.
- V. Ptitsyn et al., “High Luminosity Electron-hadron Collider eRHIC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ019, pp. 3726-3728.
- J. R. Cary, R. E. Giacone, and K. Sonnad, “Halo Formation in an Intense Charged Particle Beam”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B07, pp. 1564-1565.
- P. Spiller et al., “The GSI Synchrotron Facility Proposal for Acceleration of High Intensity Ion and Proton Beams”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA006, pp. 589-591.
- Z. Dzwigalski and Z. Zimek, “LAE 10 Electron Accelerator Charge Monitor”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI053, pp. 1879-1881.
- Y. Zhu, S. Hulbert, M. Idir, I. Jarrige, S. O, and E. Vescovo, “Engineering Design and Commissioning Performance of the ESM and Six Soft X-Ray Beamlines at NSLS-II”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 435-439.
- Q. Wu and I. Ben-Zvi, “Optimization of Higher Order Mode Dampers in the 56 MHz SRF Cavity for RHIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC086, pp. 3081-3083.
- K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279.
- H. Schmickler Geneva, “Industrial Products for Beam Instrumentation”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper DS03, pp. XX-XX.
- L. R. Evans, “LHC Status and Plans”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B004, pp. 61-65.
- S. A. Macdonell, “Application of Industry Recognised Development Tools and Methodologies, such as Six Sigma to Facilitate the Efficient Delivery of Innovative and Robust Engineering Solutions at Synchrotron Facilities”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 184-188.
- J. Angot, T. Lamy, M. Marie-Jeanne, P. Sortais, and T. Thuillier, “LPSC PHOENIX ECR Charge Breeder Beam Optics and Efficiencies”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper THYO02, pp. 167-171.
- H. Podlech et al., “General Layout of the 17 MeV Injector for MYRRHA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS039, pp. 2574-2576.
- D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1930-1933.
- O. A. Plotnikova, V. Y. Chudaev, and S. E. Karnaev, “Application of VEPP-4M Database for Analysis Radiation Resistance of Temperature Sensors on Base DS1631Z”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP034, pp. XX-XX.
- R. W. Chasman, E. D. Courant, and M. Month, “Effects in Low Periodicity Lattices Resulting from Low beta Insertions”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1429-1433.
- X. Xu, J. Chen, and L. He, “The radiation monitoring system for Super Tau Charm Facility - Beam Test Platform”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB115, unpublished.
Back to search