JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	V. Serri?¿re and J. Jacob, “Expected Lifetime Improvement with a Superconducting Harmonic RF System at the ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI004, pp. 748-750. 
[n]	A. Ratti et al., “Fabrication and Testing of the First Module of the SNS RFQ”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD05, pp. 911-913. 
[n]	S. K. Mohanty et al., “Development of Multi-Alkali Antimonides Photocathodes for High-Brightness RF Photoinjectors”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1416-1419. doi:10.18429/JACoW-IPAC2021-TUPAB034
[n]	D. Dowell et al., “First Operation of a High Duty Factor Photoinjector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2967-2970. 
[n]	A. Letchford, K. Bongardt, and M. Pabst, “Halo Formation of Bunched Beams in Periodic Focusing Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP121, pp. 1767-1769. 
[n]	C. S. Derrez et al., “Wire Scanner Systems at the European Spallation Source (ESS): Tests and First Beam Commissioning Results”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 372-375. doi:10.18429/JACoW-LINAC2022-TUPOJO13
[n]	V. I. Nikiforov, A. Dovbnya, N. A. Dovbnya, and V. L. Uvarov, “Electron Linac Based e,X-radiation Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH143, pp. 2257-2259. 
[n]	T. Kikuchi et al., “Application of Surface-Partially Nitrided High-Purity Ti as a Nonevaporable Getter for Synchrotron Radiation Beamline”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper WEPPP042, unpublished. 
[n]	M. A. Knafel, M. Madura, and A. I. Wawrzyniak, “Development of RF Interlock and Diagnostics Systems in SOLARIS Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3082-3083. doi:10.18429/JACoW-IPAC2019-WEPRB115
[n]	E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92. 
[n]	F. Donoso, E. Bründermann, M. Frank, S. Funkner, A.-S. Mueller, and M. Reissig, “Extended phase space tomography for EOSD simulation considering crystal geometry effects”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2818-2821. doi:10.18429/JACoW-IPAC2025-THPM063
[n]	P. Raimondi and A. Wolski, “New Concepts for Damping Rings”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI029, pp. 482-484. 
[n]	F. Abusaif et al., “Optimization studies on accelerator sample components for energy management purposes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2887-2890. doi:10.18429/JACoW-IPAC2024-WEPS79
[n]	H. Shang et al., “The high-level software of the beam position limits detector system for the Advanced Photon Source upgrade storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3390-3392. doi:10.18429/JACoW-IPAC2024-THPG56
[n]	P. W. Schmor, “High Intensity Sources of Polarized Protons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1713-1718. 
[n]	S. S. Jagabathuni, F. Carlier, and S. Liuzzo, “FCC-ee optics tuning studies with pyAT and Xsuite”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 394-397. doi:10.18429/JACoW-IPAC2025-MOPM037
[n]	G. Tiwari et al., “EUV FEL light source based on energy recovery linac with on-orbit laser plasma injection”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 408-411. doi:10.18429/JACoW-IPAC2024-MOPG66
[n]	G. V. Stupakov, Y. T. Ding, and Z. Huang, “Calculation of the Beam Field in the LCLS Bunch Length Monitor”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH062, pp. 728-731. 
[n]	P. Kolb, B. Amini, R. E. Laxdal, Y. Ma, Z. Y. Yao, and V. Zvyagintsev, “Measuring the Higher Order Mode Spectrum of the TRIUMF 9-cell Cavity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP020, pp. 936-938. 
[n]	Y. Iwashita et al., “Tests of Superconducting Materials in a High-Q RF Cavity”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP027, pp. 305-305. 
[n]	E. Gschwendtner, R. Assmann, B. Dehning, G. Ferioli, and V. Kain Geneva, “Ionisation Chambers for the LHC Beam Loss Detection”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT30, pp. XX-XX. 
[n]	S. P. Yue, G. C. Chang, Q. Hou, B. Ji, and M. Li, “The Progress in Design, Preparation and Measurement of MLL for HEPS”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 24-27. doi:10.18429/JACoW-MEDSI2023-TUOBM05
[n]	K. Hatanaka, A. Goto, T. Inamura, H. Kamitsubo, M. Kase, and Y. Yano, “Beam Transport System for RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-01, pp. 523-525. 
[n]	A. G. Khachatryan, K.-J. Boller, and F. A. van Goor, “Charged Particle Interaction with a Chirped Electromagnetic Pulse”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG046, pp. 1903-1905. 
[n]	K. Taylor et al., “Dose calculations for warm quadrupoles in the LHC off-momentum cleaning insertion”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1143-1146. doi:10.18429/JACoW-IPAC2025-TUPB091
[n]	H. Guerin et al., “The HL-LHC Beam Gas Vertex Monitor - Simulations for Design Optimisation and Performance Study”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2120-2123. doi:10.18429/JACoW-IPAC2021-TUPAB278
[n]	M. Diaz Zumel et al., “Qualification of components for installation in LHC kicker magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3886-3889. doi:10.18429/JACoW-IPAC2024-THPS61
[n]	A. Lei, R. Luo, Q. Chen, and Y. Xiong, “Design of a 3-cell rectangular deflecting cavity for a compact THz-FEL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2315-2318. doi:10.18429/JACoW-IPAC2024-WEPG43
[n]	M. Yang, F. S. Chen, W. Kang, X. J. Sun, and Y. S. Zhu, “CEPC Collider and Booster Magnets”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 247. doi:10.18429/JACoW-eeFACT2018-WEOBB05
[n]	J. Shi, L. Jin, and W. Herr, “Study of the Wire Compensation of Long-range Beam-beam Interactions in LHC with a Strong-strong Beam-beam Simulation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI096, pp. 1299-1301. 
[n]	W. S. Gilbert, “Summary of International Progress on Superconducting Magnets”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 668-675. 
[n]	M. Gusarova, T. Kulevoy, I. I. Petrushina, A. S. Plastun, and S. M. Polozov, “The Optimization of the Buncher at 145.2 MHz to Reduce Multipactor Effect”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB06, pp. 166-168. 
[n]	I. Vasserman et al., “Experimental Study of Collective Effects in BEP Storage Ring with High Stored Current”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3711-3714. 
[n]	T. Thuillier et al., “Challenges and Prospects of Electron Cyclotron Resonance Charge Breeding”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 14-19. doi:10.18429/JACoW-ECRIS2018-MOC1
[n]	P. A. Seidl et al., “The High Current Transport Experiment for Heavy Ion Inertial Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC001, pp. 536-540. 
[n]	J. Nudell, Z. Liu, C. A. Preissner, and V. Sajaev, “Calculation of Orbit Distortions for the APS Upgrade Due to Girder Resonances”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 95-98. doi:10.18429/JACoW-MEDSI2018-TUPH28
[n]	M. Felber et al., “RF-based Synchronization of the Seed and Pump-Probe Lasers to the Optical Synchronization System at FLASH”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOA3, pp. 544-547. 
[n]	J. Boedewadt et al., “Parameter Optimization for Operation of sFLASH With Echo-Enabled Harmonic Generation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2592-2595. doi:10.18429/JACoW-IPAC2017-WEPAB015
[n]	S. Chemli, C. Hauviller, R. Messerli, Y. Muttoni, H. Prin, and E. van Uytvinck, “A Virtual CAD Model of the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B13, pp. 2139-2141. 
[n]	Yu. A. Satov et al., “Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 327-329. doi:10.18429/JACoW-RuPAC2021-TUPSB48
[n]	I. Petrushina et al., “High Brightness CW Electron Beams From Superconducting RF Photoinjector”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper MOZBB4, unpublished. 
[n]	G. W. Foster et al., “Beam Manipulation and Compression Using Broadband RF Systems in the Fermilab Main Injector and Recycler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT149, pp. 1479-1481. 
[n]	A. D. Baer et al., “Design and Performance of the Stanford Synchrotron Radiation Project (SSRP)”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1794-1798. 
[n]	L. Lin and P. F. Tavares, “First Results of Quasi-Isochronous Operation at LNLS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA133, pp. 2894-2896. 
[n]	C. Y. Wong and A. P. Shishlo, “Maximum Entropy Reconstruction of 4D Transverse Phase Space from 2D Projections: with Application to Laser Wire Measurements in the SNS HEBT”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1008-1011. doi:10.18429/JACoW-IPAC2021-MOPAB326
[n]	S. Y. Zhang et al., “Beam Induced Pressure Rise at RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT095, pp. 4308-4310. 
[n]	S. Redaelli et al., “Crystal collimation of heavy-ion beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3927-3932. doi:10.18429/JACoW-IPAC2024-FRXN3
[n]	M. A. Jebramcik et al., “Injection Design Options for the Low-Emittance PETRA IV Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2689-2692. doi:10.18429/JACoW-IPAC2022-THPOPT043
[n]	G. Jackson, “Design, Implementation, and Results from a Longitudinal Phase Space Tomography (PST) Monitor in the Fermilab Main Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2418-2420. 
[n]	C. Oliver et al., “Impact of the Magnet Alignment and Field Errors on the Output Uniform Beam at the DONES HEBT Line”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3251-3253. doi:10.18429/JACoW-IPAC2021-WEPAB259
[n]	R. Garoby, “New RF Exercises Envisaged in the CERN-PS for the Antiproton Production Beam of the ACOL Machine”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2332-2335. 
[n]	Barill?¿re R., Baggiolini V., Beharell M., Chmielewski D., Gras P., Komoutnikov V., Kostro K., Liiou A., Milcent H., “Results of the OPC Evaluation Done within JCOP for the Control of the LHC Experiments”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P43, pp. XX-XX. 
[n]	V. V. Katalev, S. Choroba, E. M. Apostolov, and A. A. Seliverstov, “A New Type of Waveguide Distribution for the Accelerator Module Test Facility of the European XFEL”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP021, pp. 475-477. 
[n]	P. J. Spiller et al., “Status of the FAIR Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 63-68. doi:10.18429/JACoW-IPAC2018-MOZGBF2
[n]	P. Micke et al., “An Optical Atomic Clock Based on a Highly Charged Ion”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR1WH01, unpublished. 
[n]	I. S. Ko et al., “TRAPPING OF BACKGROUND PLASMA ELECTRONS BY PLASMA WAKEFIELDS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEBM01, pp. XX-XX. 
[n]	J. D. Fuerst, K. W. Shepard, M. P. Kelly, S. M. Gerbick, Z. A. Conway, and G. P. Zinkann, “Progress on Cavity Fabrication for the ATLAS Energy Upgrade”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP75, pp. XX-XX. 
[n]	J. Zamudio Estrada, C. Hampton, J. Cohen, J. Joshi, R. Sierra, and S. Dehe, “Liquid sample delivery controls at LCLS”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1529-1533. doi:10.18429/JACoW-ICALEPCS2025-THMR004
[n]	B. Dwersteg et al., “Status of the Superconducting Cavity Program for HERA”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2429-2432. 
[n]	G. P. Goderre and E. Malamud, “Helical Orbit Studies in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1818-1821. 
[n]	D. Golob, R. Kovacic, M. Pelko, M. Plesko, A. Podborsek, and M. Kobal, “Extended MicroIOC Family (LOCO)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB20, pp. 439-441. 
[n]	I. A. Ivanenko et al., “Magnetic Field Design and Calculation for the FLNR DC-280 Cyclotron”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA32, pp. 105-107. 
[n]	C. T. Rogers, “Muon Ionization Cooling Experiment: Results & Prospects”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4528-4530. doi:10.18429/JACoW-IPAC2021-FRXB05
[n]	G. R. Swain and A. A. Browman, “Proposed Bunching Scheme for a Polarized H - Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3024-3027. 
[n]	Y. M. Nosochkov et al., “Dynamic Aperture of the EIC Electron Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1950-1953. doi:10.18429/JACoW-IPAC2022-WEPOPT043
[n]	J. Ma, G. Wang, V. Litvinenko, and Y. Jing, “Simulations of coherent electron cooling with varied beam parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1043-1046. doi:10.18429/JACoW-IPAC2024-TUPC18
[n]	F. Marti, T. Antaya, M. B. Chen, M. M. Gordon, E. Liukkonen, and C. Salgado, “Design Calculations for the Central Region of the NSCL 500 MeV Superconducting Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-24, pp. 465-468. 
[n]	M. E. Conde et al., “The Argonne Wakefield Accelerator Facility: Status and Recent Activities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE016, pp. 1485-1487. 
[n]	F. P. Mooring, R. L. Amrein, and A. Langsdorf, “Upgrading the Argonne 4-mV Dynamitron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1726-1730. 
[n]	S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1315-1318. doi:10.18429/JACoW-IPAC2025-TUPM068
[n]	N. Cook et al., “An online analysis platform for improving X-ray light source operations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4266-4268. doi:10.18429/JACoW-IPAC2023-THPA128
[n]	J.-S. Storch, E. Boos, H. Hähnel, H. Podlech, K. Kümpel, and P. Braun, “Improvements to 4-rod RFQs with additive manufacturing processes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3494-3496. doi:10.18429/JACoW-IPAC2024-THPR08
[n]	J. Unger, A. Fedotov, G. Hoffstaetter, J. Kewisch, and S. Seletskiy, “Dynamic aperture correction for Ring Electron Cooler”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS117, unpublished. 
[n]	C. Wang et al., “A new design of the S-band acceleration unit”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR16, unpublished. 
[n]	M. A. Allen, M. Cornacchia, and A. Millich, “A Longitudinal Feedback System for PEP”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3287-3291. 
[n]	M. Brendike, L. Porzio, M. Bajdel, S. Vadilonga, and W. Smith, “The Enhanced Liquid Interface Spectroscopy and Analysis (ELISA) beamline control system prototype”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD056, unpublished. 
[n]	S. C. Leemann and H. Tarawneh, “Impact of Insertion Devices on the MAX IV Storage Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1696-1698. doi:10.18429/JACoW-IPAC2015-TUPJE038
[n]	H. Lovelace III et al., “Update on injection optics into the Electron Ion Collider Hadron Storage Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1303, unpublished. 
[n]	D. Khan and T. O. Raubenheimer, “An Emittance-Preservation Study of a Five-Bend Chicane for the LCLS-II-HE Beamline”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 305-308. doi:10.18429/JACoW-FEL2017-TUP030
[n]	C. M. Bhat and P. S. Martin, “Radiation Shielding of the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA12, pp. 2105-2107. 
[n]	W. Gai and C. Ho, “Modelling of the Transverse Mode Suppressor for Dielectric Wake-field Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2554-2557. 
[n]	B. Popovic, “Fabrication and beam testing of a 180 GHz colinear wakefield accelerator”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUZA002, unpublished. 
[n]	H. H. Umstatter, “On the Measurement and Interpretation of Coupling Impedance Data in the Frequency and Time Domain”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1875-1878. 
[n]	K. Yamamoto et al., “Status of J-PARC accelerator chain”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1128-1131. doi:10.18429/JACoW-IPAC2025-TUPB074
[n]	Y. Enomoto, K. Abe, N. Okada, and T. Takatomi, “A New Flux Concentrator Made of Cu Alloy for the SuperKEKB Positron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2954-2956. doi:10.18429/JACoW-IPAC2021-WEPAB144
[n]	M. Jensen, J. Alex, M. Maddock, M. Mueller, S. Rains, and A. V. Watkins, “First Results of the IOT Based 300 kW 500 MHz Amplifier for the Diamond Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT025, pp. 1883-1885. 
[n]	P. G. Bricault et al., “ISAC-1: Radioactive Ion Beams Facility at TRIUMF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG12, pp. 348-350. 
[n]	K. Manukyan, S. Dastan, E. Karantzoulis, and S. Krecic, “Injection studies for Elettra 2.0”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2148, unpublished. 
[n]	C. E. Reece, J. W. Angle, M. J. Kelley, E. M. Lechner, A. D. Palczewski, and F. A. Stevie, “Challenges to Reliable Production Nitrogen Doping of Nb for SRF Accelerating Cavities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1311-1314. doi:10.18429/JACoW-IPAC2022-TUPOTK042
[n]	N. La Rosa, S. Moscato, G. Trovato, J. Ablett, J.-P. Rueff, and M. Camarda, “Real-Time Feedback System for Synchrotron Beam Stabilization using in-line Silicon Carbide X-Ray Beam Position Monitors”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6065, unpublished. 
[n]	L. Thorndahl and A. Vaughan, “Transverse Feedback for the ISR”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 807-809. 
[n]	F. Herfurth et al., “Heavy, Highly-charged Ions at GSI/FAIR Decelerated and Cooled”, presented at the COOL2023, Montreux, Switzerland, Oct. 2023, paper WEPAM2R2, unpublished. 
[n]	J. Kelley, D. Barber, J. Devlin, and O. Beznosov, “Study of uncorrelated resonance crossing in a controlled environment”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP081, unpublished. 
[n]	K. Saito et al., “HIGH POWER TEST OF COUPLER WITH CAPACITIVE WINDOW”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP026, pp. 625-627. 
[n]	F. Tamura, C. Ohmori, Y. Sugiyama, and M. Yoshii, “Non-Adiabatic Longitudinal Bunch Manipulation at Flattop of the J-PARC MR”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3023-3026. doi:10.18429/JACoW-IPAC2021-WEPAB178
[n]	D. K. Liu and C. Z. Zhang, “Human-Machine Interface Software Package”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 490-492. doi:10.18429/JACoW-ICALEPCS1991-S13MMI12
[n]	C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3040-3042. doi:10.18429/JACoW-IPAC2025-THPS034

For LaTeX

Use Complete Form

For BibTeX

References

Back to search