Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Serri?¿re and J. Jacob, “Expected Lifetime Improvement with a Superconducting Harmonic RF System at the ESRF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI004, pp. 748-750.
[n] A. Ratti et al., “Fabrication and Testing of the First Module of the SNS RFQ”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD05, pp. 911-913.
[n] S. K. Mohanty et al., “Development of Multi-Alkali Antimonides Photocathodes for High-Brightness RF Photoinjectors”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1416-1419. doi:10.18429/JACoW-IPAC2021-TUPAB034
[n] D. Dowell et al., “First Operation of a High Duty Factor Photoinjector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2967-2970.
[n] A. Letchford, K. Bongardt, and M. Pabst, “Halo Formation of Bunched Beams in Periodic Focusing Systems”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP121, pp. 1767-1769.
[n] C. S. Derrez et al., “Wire Scanner Systems at the European Spallation Source (ESS): Tests and First Beam Commissioning Results”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 372-375. doi:10.18429/JACoW-LINAC2022-TUPOJO13
[n] V. I. Nikiforov, A. Dovbnya, N. A. Dovbnya, and V. L. Uvarov, “Electron Linac Based e,X-radiation Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH143, pp. 2257-2259.
[n] T. Kikuchi et al., “Application of Surface-Partially Nitrided High-Purity Ti as a Nonevaporable Getter for Synchrotron Radiation Beamline”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper WEPPP042, unpublished.
[n] M. A. Knafel, M. Madura, and A. I. Wawrzyniak, “Development of RF Interlock and Diagnostics Systems in SOLARIS Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3082-3083. doi:10.18429/JACoW-IPAC2019-WEPRB115
[n] E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
[n] F. Donoso, E. Bründermann, M. Frank, S. Funkner, A.-S. Mueller, and M. Reissig, “Extended phase space tomography for EOSD simulation considering crystal geometry effects”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2818-2821. doi:10.18429/JACoW-IPAC2025-THPM063
[n] P. Raimondi and A. Wolski, “New Concepts for Damping Rings”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI029, pp. 482-484.
[n] F. Abusaif et al., “Optimization studies on accelerator sample components for energy management purposes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2887-2890. doi:10.18429/JACoW-IPAC2024-WEPS79
[n] H. Shang et al., “The high-level software of the beam position limits detector system for the Advanced Photon Source upgrade storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3390-3392. doi:10.18429/JACoW-IPAC2024-THPG56
[n] P. W. Schmor, “High Intensity Sources of Polarized Protons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1713-1718.
[n] S. S. Jagabathuni, F. Carlier, and S. Liuzzo, “FCC-ee optics tuning studies with pyAT and Xsuite”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 394-397. doi:10.18429/JACoW-IPAC2025-MOPM037
[n] G. Tiwari et al., “EUV FEL light source based on energy recovery linac with on-orbit laser plasma injection”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 408-411. doi:10.18429/JACoW-IPAC2024-MOPG66
[n] G. V. Stupakov, Y. T. Ding, and Z. Huang, “Calculation of the Beam Field in the LCLS Bunch Length Monitor”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH062, pp. 728-731.
[n] P. Kolb, B. Amini, R. E. Laxdal, Y. Ma, Z. Y. Yao, and V. Zvyagintsev, “Measuring the Higher Order Mode Spectrum of the TRIUMF 9-cell Cavity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP020, pp. 936-938.
[n] Y. Iwashita et al., “Tests of Superconducting Materials in a High-Q RF Cavity”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP027, pp. 305-305.
[n] E. Gschwendtner, R. Assmann, B. Dehning, G. Ferioli, and V. Kain Geneva, “Ionisation Chambers for the LHC Beam Loss Detection”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT30, pp. XX-XX.
[n] S. P. Yue, G. C. Chang, Q. Hou, B. Ji, and M. Li, “The Progress in Design, Preparation and Measurement of MLL for HEPS”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 24-27. doi:10.18429/JACoW-MEDSI2023-TUOBM05
[n] K. Hatanaka, A. Goto, T. Inamura, H. Kamitsubo, M. Kase, and Y. Yano, “Beam Transport System for RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I7-01, pp. 523-525.
[n] A. G. Khachatryan, K.-J. Boller, and F. A. van Goor, “Charged Particle Interaction with a Chirped Electromagnetic Pulse”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG046, pp. 1903-1905.
[n] K. Taylor et al., “Dose calculations for warm quadrupoles in the LHC off-momentum cleaning insertion”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1143-1146. doi:10.18429/JACoW-IPAC2025-TUPB091
[n] H. Guerin et al., “The HL-LHC Beam Gas Vertex Monitor - Simulations for Design Optimisation and Performance Study”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2120-2123. doi:10.18429/JACoW-IPAC2021-TUPAB278
[n] M. Diaz Zumel et al., “Qualification of components for installation in LHC kicker magnets”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3886-3889. doi:10.18429/JACoW-IPAC2024-THPS61
[n] A. Lei, R. Luo, Q. Chen, and Y. Xiong, “Design of a 3-cell rectangular deflecting cavity for a compact THz-FEL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2315-2318. doi:10.18429/JACoW-IPAC2024-WEPG43
[n] M. Yang, F. S. Chen, W. Kang, X. J. Sun, and Y. S. Zhu, “CEPC Collider and Booster Magnets”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 247. doi:10.18429/JACoW-eeFACT2018-WEOBB05
[n] J. Shi, L. Jin, and W. Herr, “Study of the Wire Compensation of Long-range Beam-beam Interactions in LHC with a Strong-strong Beam-beam Simulation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI096, pp. 1299-1301.
[n] W. S. Gilbert, “Summary of International Progress on Superconducting Magnets”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 668-675.
[n] M. Gusarova, T. Kulevoy, I. I. Petrushina, A. S. Plastun, and S. M. Polozov, “The Optimization of the Buncher at 145.2 MHz to Reduce Multipactor Effect”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB06, pp. 166-168.
[n] I. Vasserman et al., “Experimental Study of Collective Effects in BEP Storage Ring with High Stored Current”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3711-3714.
[n] T. Thuillier et al., “Challenges and Prospects of Electron Cyclotron Resonance Charge Breeding”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 14-19. doi:10.18429/JACoW-ECRIS2018-MOC1
[n] P. A. Seidl et al., “The High Current Transport Experiment for Heavy Ion Inertial Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC001, pp. 536-540.
[n] J. Nudell, Z. Liu, C. A. Preissner, and V. Sajaev, “Calculation of Orbit Distortions for the APS Upgrade Due to Girder Resonances”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 95-98. doi:10.18429/JACoW-MEDSI2018-TUPH28
[n] M. Felber et al., “RF-based Synchronization of the Seed and Pump-Probe Lasers to the Optical Synchronization System at FLASH”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOA3, pp. 544-547.
[n] J. Boedewadt et al., “Parameter Optimization for Operation of sFLASH With Echo-Enabled Harmonic Generation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2592-2595. doi:10.18429/JACoW-IPAC2017-WEPAB015
[n] S. Chemli, C. Hauviller, R. Messerli, Y. Muttoni, H. Prin, and E. van Uytvinck, “A Virtual CAD Model of the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B13, pp. 2139-2141.
[n] Yu. A. Satov et al., “Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 327-329. doi:10.18429/JACoW-RuPAC2021-TUPSB48
[n] I. Petrushina et al., “High Brightness CW Electron Beams From Superconducting RF Photoinjector”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper MOZBB4, unpublished.
[n] G. W. Foster et al., “Beam Manipulation and Compression Using Broadband RF Systems in the Fermilab Main Injector and Recycler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT149, pp. 1479-1481.
[n] A. D. Baer et al., “Design and Performance of the Stanford Synchrotron Radiation Project (SSRP)”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1794-1798.
[n] L. Lin and P. F. Tavares, “First Results of Quasi-Isochronous Operation at LNLS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA133, pp. 2894-2896.
[n] C. Y. Wong and A. P. Shishlo, “Maximum Entropy Reconstruction of 4D Transverse Phase Space from 2D Projections: with Application to Laser Wire Measurements in the SNS HEBT”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1008-1011. doi:10.18429/JACoW-IPAC2021-MOPAB326
[n] S. Y. Zhang et al., “Beam Induced Pressure Rise at RHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT095, pp. 4308-4310.
[n] S. Redaelli et al., “Crystal collimation of heavy-ion beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3927-3932. doi:10.18429/JACoW-IPAC2024-FRXN3
[n] M. A. Jebramcik et al., “Injection Design Options for the Low-Emittance PETRA IV Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2689-2692. doi:10.18429/JACoW-IPAC2022-THPOPT043
[n] G. Jackson, “Design, Implementation, and Results from a Longitudinal Phase Space Tomography (PST) Monitor in the Fermilab Main Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2418-2420.
[n] C. Oliver et al., “Impact of the Magnet Alignment and Field Errors on the Output Uniform Beam at the DONES HEBT Line”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3251-3253. doi:10.18429/JACoW-IPAC2021-WEPAB259
[n] R. Garoby, “New RF Exercises Envisaged in the CERN-PS for the Antiproton Production Beam of the ACOL Machine”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2332-2335.
[n] Barill?¿re R., Baggiolini V., Beharell M., Chmielewski D., Gras P., Komoutnikov V., Kostro K., Liiou A., Milcent H., “Results of the OPC Evaluation Done within JCOP for the Control of the LHC Experiments”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P43, pp. XX-XX.
[n] V. V. Katalev, S. Choroba, E. M. Apostolov, and A. A. Seliverstov, “A New Type of Waveguide Distribution for the Accelerator Module Test Facility of the European XFEL”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP021, pp. 475-477.
[n] P. J. Spiller et al., “Status of the FAIR Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 63-68. doi:10.18429/JACoW-IPAC2018-MOZGBF2
[n] P. Micke et al., “An Optical Atomic Clock Based on a Highly Charged Ion”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR1WH01, unpublished.
[n] I. S. Ko et al., “TRAPPING OF BACKGROUND PLASMA ELECTRONS BY PLASMA WAKEFIELDS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEBM01, pp. XX-XX.
[n] J. D. Fuerst, K. W. Shepard, M. P. Kelly, S. M. Gerbick, Z. A. Conway, and G. P. Zinkann, “Progress on Cavity Fabrication for the ATLAS Energy Upgrade”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP75, pp. XX-XX.
[n] J. Zamudio Estrada, C. Hampton, J. Cohen, J. Joshi, R. Sierra, and S. Dehe, “Liquid sample delivery controls at LCLS”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1529-1533. doi:10.18429/JACoW-ICALEPCS2025-THMR004
[n] B. Dwersteg et al., “Status of the Superconducting Cavity Program for HERA”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2429-2432.
[n] G. P. Goderre and E. Malamud, “Helical Orbit Studies in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1818-1821.
[n] D. Golob, R. Kovacic, M. Pelko, M. Plesko, A. Podborsek, and M. Kobal, “Extended MicroIOC Family (LOCO)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB20, pp. 439-441.
[n] I. A. Ivanenko et al., “Magnetic Field Design and Calculation for the FLNR DC-280 Cyclotron”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA32, pp. 105-107.
[n] C. T. Rogers, “Muon Ionization Cooling Experiment: Results & Prospects”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4528-4530. doi:10.18429/JACoW-IPAC2021-FRXB05
[n] G. R. Swain and A. A. Browman, “Proposed Bunching Scheme for a Polarized H - Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3024-3027.
[n] Y. M. Nosochkov et al., “Dynamic Aperture of the EIC Electron Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1950-1953. doi:10.18429/JACoW-IPAC2022-WEPOPT043
[n] J. Ma, G. Wang, V. Litvinenko, and Y. Jing, “Simulations of coherent electron cooling with varied beam parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1043-1046. doi:10.18429/JACoW-IPAC2024-TUPC18
[n] F. Marti, T. Antaya, M. B. Chen, M. M. Gordon, E. Liukkonen, and C. Salgado, “Design Calculations for the Central Region of the NSCL 500 MeV Superconducting Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-24, pp. 465-468.
[n] M. E. Conde et al., “The Argonne Wakefield Accelerator Facility: Status and Recent Activities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE016, pp. 1485-1487.
[n] F. P. Mooring, R. L. Amrein, and A. Langsdorf, “Upgrading the Argonne 4-mV Dynamitron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1726-1730.
[n] S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1315-1318. doi:10.18429/JACoW-IPAC2025-TUPM068
[n] N. Cook et al., “An online analysis platform for improving X-ray light source operations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4266-4268. doi:10.18429/JACoW-IPAC2023-THPA128
[n] J.-S. Storch, E. Boos, H. Hähnel, H. Podlech, K. Kümpel, and P. Braun, “Improvements to 4-rod RFQs with additive manufacturing processes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3494-3496. doi:10.18429/JACoW-IPAC2024-THPR08
[n] J. Unger, A. Fedotov, G. Hoffstaetter, J. Kewisch, and S. Seletskiy, “Dynamic aperture correction for Ring Electron Cooler”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS117, unpublished.
[n] C. Wang et al., “A new design of the S-band acceleration unit”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR16, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Serri?¿re and J. Jacob, “Expected Lifetime Improvement with a Superconducting Harmonic RF System at the ESRF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI004, pp. 748-750.
- A. Ratti et al., “Fabrication and Testing of the First Module of the SNS RFQ”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD05, pp. 911-913.
- S. K. Mohanty et al., “Development of Multi-Alkali Antimonides Photocathodes for High-Brightness RF Photoinjectors”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1416-1419.
- D. Dowell et al., “First Operation of a High Duty Factor Photoinjector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2967-2970.
- A. Letchford, K. Bongardt, and M. Pabst, “Halo Formation of Bunched Beams in Periodic Focusing Systems”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP121, pp. 1767-1769.
- C. S. Derrez et al., “Wire Scanner Systems at the European Spallation Source (ESS): Tests and First Beam Commissioning Results”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 372-375.
- V. I. Nikiforov, A. Dovbnya, N. A. Dovbnya, and V. L. Uvarov, “Electron Linac Based e,X-radiation Facility”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH143, pp. 2257-2259.
- T. Kikuchi et al., “Application of Surface-Partially Nitrided High-Purity Ti as a Nonevaporable Getter for Synchrotron Radiation Beamline”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper WEPPP042, unpublished.
- M. A. Knafel, M. Madura, and A. I. Wawrzyniak, “Development of RF Interlock and Diagnostics Systems in SOLARIS Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3082-3083.
- E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
- F. Donoso, E. Bründermann, M. Frank, S. Funkner, A.-S. Mueller, and M. Reissig, “Extended phase space tomography for EOSD simulation considering crystal geometry effects”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM063, pp. 2818-2821.
- P. Raimondi and A. Wolski, “New Concepts for Damping Rings”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI029, pp. 482-484.
- F. Abusaif et al., “Optimization studies on accelerator sample components for energy management purposes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS79, pp. 2887-2890.
- H. Shang et al., “The high-level software of the beam position limits detector system for the Advanced Photon Source upgrade storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG56, pp. 3390-3392.
- P. W. Schmor, “High Intensity Sources of Polarized Protons”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1713-1718.
- S. S. Jagabathuni, F. Carlier, and S. Liuzzo, “FCC-ee optics tuning studies with pyAT and Xsuite”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM037, pp. 394-397.
- G. Tiwari et al., “EUV FEL light source based on energy recovery linac with on-orbit laser plasma injection”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG66, pp. 408-411.
- G. V. Stupakov, Y. T. Ding, and Z. Huang, “Calculation of the Beam Field in the LCLS Bunch Length Monitor”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH062, pp. 728-731.
- P. Kolb, B. Amini, R. E. Laxdal, Y. Ma, Z. Y. Yao, and V. Zvyagintsev, “Measuring the Higher Order Mode Spectrum of the TRIUMF 9-cell Cavity”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP020, pp. 936-938.
- Y. Iwashita et al., “Tests of Superconducting Materials in a High-Q RF Cavity”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP027, pp. 305-305.
- E. Gschwendtner, R. Assmann, B. Dehning, G. Ferioli, and V. Kain Geneva, “Ionisation Chambers for the LHC Beam Loss Detection”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT30, pp. XX-XX.
- S. P. Yue, G. C. Chang, Q. Hou, B. Ji, and M. Li, “The Progress in Design, Preparation and Measurement of MLL for HEPS”, in Proc. MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper TUOBM05, pp. 24-27.
- K. Hatanaka, A. Goto, T. Inamura, H. Kamitsubo, M. Kase, and Y. Yano, “Beam Transport System for RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I7-01, pp. 523-525.
- A. G. Khachatryan, K.-J. Boller, and F. A. van Goor, “Charged Particle Interaction with a Chirped Electromagnetic Pulse”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG046, pp. 1903-1905.
- K. Taylor et al., “Dose calculations for warm quadrupoles in the LHC off-momentum cleaning insertion”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, pp. 1143-1146.
- H. Guerin et al., “The HL-LHC Beam Gas Vertex Monitor - Simulations for Design Optimisation and Performance Study”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2120-2123.
- M. Diaz Zumel et al., “Qualification of components for installation in LHC kicker magnets”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS61, pp. 3886-3889.
- A. Lei, R. Luo, Q. Chen, and Y. Xiong, “Design of a 3-cell rectangular deflecting cavity for a compact THz-FEL”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG43, pp. 2315-2318.
- M. Yang, F. S. Chen, W. Kang, X. J. Sun, and Y. S. Zhu, “CEPC Collider and Booster Magnets”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 247.
- J. Shi, L. Jin, and W. Herr, “Study of the Wire Compensation of Long-range Beam-beam Interactions in LHC with a Strong-strong Beam-beam Simulation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI096, pp. 1299-1301.
- W. S. Gilbert, “Summary of International Progress on Superconducting Magnets”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 668-675.
- M. Gusarova, T. Kulevoy, I. I. Petrushina, A. S. Plastun, and S. M. Polozov, “The Optimization of the Buncher at 145.2 MHz to Reduce Multipactor Effect”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB06, pp. 166-168.
- I. Vasserman et al., “Experimental Study of Collective Effects in BEP Storage Ring with High Stored Current”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3711-3714.
- T. Thuillier et al., “Challenges and Prospects of Electron Cyclotron Resonance Charge Breeding”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 14-19.
- P. A. Seidl et al., “The High Current Transport Experiment for Heavy Ion Inertial Fusion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC001, pp. 536-540.
- J. Nudell, Z. Liu, C. A. Preissner, and V. Sajaev, “Calculation of Orbit Distortions for the APS Upgrade Due to Girder Resonances”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 95-98.
- M. Felber et al., “RF-based Synchronization of the Seed and Pump-Probe Lasers to the Optical Synchronization System at FLASH”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOA3, pp. 544-547.
- J. Boedewadt et al., “Parameter Optimization for Operation of sFLASH With Echo-Enabled Harmonic Generation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2592-2595.
- S. Chemli, C. Hauviller, R. Messerli, Y. Muttoni, H. Prin, and E. van Uytvinck, “A Virtual CAD Model of the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B13, pp. 2139-2141.
- Yu. A. Satov et al., “Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 327-329.
- I. Petrushina et al., “High Brightness CW Electron Beams From Superconducting RF Photoinjector”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper MOZBB4, unpublished.
- G. W. Foster et al., “Beam Manipulation and Compression Using Broadband RF Systems in the Fermilab Main Injector and Recycler”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT149, pp. 1479-1481.
- A. D. Baer et al., “Design and Performance of the Stanford Synchrotron Radiation Project (SSRP)”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1794-1798.
- L. Lin and P. F. Tavares, “First Results of Quasi-Isochronous Operation at LNLS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA133, pp. 2894-2896.
- C. Y. Wong and A. P. Shishlo, “Maximum Entropy Reconstruction of 4D Transverse Phase Space from 2D Projections: with Application to Laser Wire Measurements in the SNS HEBT”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1008-1011.
- S. Y. Zhang et al., “Beam Induced Pressure Rise at RHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT095, pp. 4308-4310.
- S. Redaelli et al., “Crystal collimation of heavy-ion beams”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper FRXN3, pp. 3927-3932.
- M. A. Jebramcik et al., “Injection Design Options for the Low-Emittance PETRA IV Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2689-2692.
- G. Jackson, “Design, Implementation, and Results from a Longitudinal Phase Space Tomography (PST) Monitor in the Fermilab Main Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2418-2420.
- C. Oliver et al., “Impact of the Magnet Alignment and Field Errors on the Output Uniform Beam at the DONES HEBT Line”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3251-3253.
- R. Garoby, “New RF Exercises Envisaged in the CERN-PS for the Antiproton Production Beam of the ACOL Machine”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2332-2335.
- Barill?¿re R., Baggiolini V., Beharell M., Chmielewski D., Gras P., Komoutnikov V., Kostro K., Liiou A., Milcent H., “Results of the OPC Evaluation Done within JCOP for the Control of the LHC Experiments”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P43, pp. XX-XX.
- V. V. Katalev, S. Choroba, E. M. Apostolov, and A. A. Seliverstov, “A New Type of Waveguide Distribution for the Accelerator Module Test Facility of the European XFEL”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP021, pp. 475-477.
- P. J. Spiller et al., “Status of the FAIR Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 63-68.
- P. Micke et al., “An Optical Atomic Clock Based on a Highly Charged Ion”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR1WH01, unpublished.
- I. S. Ko et al., “TRAPPING OF BACKGROUND PLASMA ELECTRONS BY PLASMA WAKEFIELDS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEBM01, pp. XX-XX.
- J. D. Fuerst, K. W. Shepard, M. P. Kelly, S. M. Gerbick, Z. A. Conway, and G. P. Zinkann, “Progress on Cavity Fabrication for the ATLAS Energy Upgrade”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP75, pp. XX-XX.
- J. Zamudio Estrada, C. Hampton, J. Cohen, J. Joshi, R. Sierra, and S. Dehe, “Liquid sample delivery controls at LCLS”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1529-1533.
- B. Dwersteg et al., “Status of the Superconducting Cavity Program for HERA”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2429-2432.
- G. P. Goderre and E. Malamud, “Helical Orbit Studies in the Tevatron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1818-1821.
- D. Golob, R. Kovacic, M. Pelko, M. Plesko, A. Podborsek, and M. Kobal, “Extended MicroIOC Family (LOCO)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB20, pp. 439-441.
- I. A. Ivanenko et al., “Magnetic Field Design and Calculation for the FLNR DC-280 Cyclotron”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA32, pp. 105-107.
- C. T. Rogers, “Muon Ionization Cooling Experiment: Results & Prospects”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4528-4530.
- G. R. Swain and A. A. Browman, “Proposed Bunching Scheme for a Polarized H - Injector”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3024-3027.
- Y. M. Nosochkov et al., “Dynamic Aperture of the EIC Electron Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1950-1953.
- J. Ma, G. Wang, V. Litvinenko, and Y. Jing, “Simulations of coherent electron cooling with varied beam parameters”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC18, pp. 1043-1046.
- F. Marti, T. Antaya, M. B. Chen, M. M. Gordon, E. Liukkonen, and C. Salgado, “Design Calculations for the Central Region of the NSCL 500 MeV Superconducting Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-24, pp. 465-468.
- M. E. Conde et al., “The Argonne Wakefield Accelerator Facility: Status and Recent Activities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE016, pp. 1485-1487.
- F. P. Mooring, R. L. Amrein, and A. Langsdorf, “Upgrading the Argonne 4-mV Dynamitron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1726-1730.
- S. Richter et al., “First magnetic experience with APPLE X knot undulators for SLS 2.0”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM068, pp. 1315-1318.
- N. Cook et al., “An online analysis platform for improving X-ray light source operations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA128, pp. 4266-4268.
- J.-S. Storch, E. Boos, H. Hähnel, H. Podlech, K. Kümpel, and P. Braun, “Improvements to 4-rod RFQs with additive manufacturing processes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR08, pp. 3494-3496.
- J. Unger, A. Fedotov, G. Hoffstaetter, J. Kewisch, and S. Seletskiy, “Dynamic aperture correction for Ring Electron Cooler”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS117, unpublished.
- C. Wang et al., “A new design of the S-band acceleration unit”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR16, unpublished.
Back to search