Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Brinkmann, “HERA Status and Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
[n] N. Aquilina, “Expected and Measured Behaviour of the Tune in the LHC Operation at 3.5 TeV”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD025, pp. 3554-3556.
[n] R. Koscielniak, “Compensation of RF Transients During Injection into the Collector Ring of the TRIUMF KAON Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 377-380.
[n] S. A. Antipov and S. Nagaitsev, “Electron Cloud Trapping in Recycler Combined Function Dipole Magnets”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1200-1203. doi:10.18429/JACoW-NAPAC2016-THPOA49
[n] F. Zimmermann, G. Arduini, and C. Carli, “Localizing Impedance Sources from Betatron-phase Beating in the CERN SPS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT046, pp. 1939-1941.
[n] P. B. Wilson, “Current Status of Superconducting Accelerator Technology”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper D01, pp. 82-89.
[n] K.-T. Hsu et al., “BPM System and its Development for the Storage Ring of NSRRC”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW023, pp. XX-XX.
[n] N. A. Konjachin, P. P. Dmitriev, N. N. Krasnov, V. P. Lapin, V. N. Mironov, and M. V. Panarin, “On 123I Production by Irradiation of 124Xe with the Protons of Mean Energy”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-10, pp. 542-544.
[n] R. Cappi, M. Giovannozzi, and G. M?®tral, “The Proton Beams for the Time-of-Flight Neutron Facility at the CERN-PS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B10, pp. 1295-1297.
[n] D. R. Adcock, J. R. Beyster, and J. L. Cole, “The General Atomic Coupled Electron Linear Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 721-729.
[n] C. P. Welsch, “Studies into Electron Beam Generation, Acceleration and Diagnostics within LA3NET”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3256-3259. doi:10.18429/JACoW-IPAC2015-WEPTY002
[n] G. Devanz, “Bunch Length Measurement on CANDELA Photoinjector”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP44, pp. 761-763.
[n] A. Jacob and G. R. Lambertson, “Impedance Measurements on Button Electrodes”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1501-1504.
[n] H. Padamsee, “Superconducting Cavities from Niobium-Copper Material”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3354-3357.
[n] W. S. Graves, “The Source Development Lab Linac at BNL”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP50, pp. 776-778.
[n] J. S. Berg, “Head-Tail Mode Instability Caused by Feedback”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP10C, pp. 942-944.
[n] A. Kumar, A. Chatterjee, K. Mahata, and K. Ramachandran, “Development of Data Acquisition Software for VME Based System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD16, pp. 35-36.
[n] I. Hofmann and K. Beckert, “Resonance Crossing in the Presence of Space Charge”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2264-2267.
[n] V. Sajaev, B. Kuske, D. Schirmer, and G. Wuestefeld, “Optimization and Tracking Studies for the 1.7 GeV Light Source BESSY II”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 994-997.
[n] G. Leyh, “Development and Testing of the ILC Marx Modulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC02, pp. 849-851.
[n] T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
[n] C. Montag and J. Kewisch, “Effect of Solenoid Field Errors on Electron Beam Temperatures in the RHIC Electron Cooler”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE030, pp. 2011-2013.
[n] P. Emma and G. V. Stupakov, “Limitations of Electron Beam Conditioning for Free-Electron Lasers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB049, pp. 926-928.
[n] B. Kalantari and T. Korhonen, “Timekeeping Mechanism at SLS/APS Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT049, pp. 1948-1950.
[n] K. J. O and J. R. Freeman, “Stochastic Electron Beams in the Ion-Focused Regime”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU433, pp. 393-395.
[n] T. Suwada and S. Ohsawa, “Recalibration of a Wall-Current Monitor Using a Beam-Induced Field for the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D055, pp. 528-530.
[n] J. S. Berg, “Longitudinal Ionization Cooling without Wedges”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA004, pp. 145-147.
[n] R. Bourque and G. Laughon, “Thermal Analysis of a Refined APT Power Coupler and Thermal Shield and the Effect on the Cryoplant”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH131, pp. 1083-1085.
[n] H. Jenhani and P. Carbonnier, “Experimental Validation of the Use of Cold Cathode Gauge inside the Cryomodule Insulation Vacuum”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 848. doi:10.18429/JACoW-SRF2021-THPTEV011
[n] F. Zimmermann, M. Giovannozzi, and A. Xagkoni, “Interaction of Macro-Particles with the LHC Proton Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC016, pp. 492-494.
[n] G. Chapman, O. Groebner, G. Linser, T. Perry, and G. Schmidlin, “Synchrotron Radiation Lead Shielding of the Vacuum Chambers for LEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2340-2343.
[n] K. Batchelor, “Microwave Undulator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-12, pp. 272-275.
[n] H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Frequency, Temperature, RF Field Dependent Surface Resistance Using Superconducting Half Wave Cavity”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 925-927. doi:10.18429/JACoW-SRF2017-THPB080
[n] G. Leyh, “Prototype Development Progress toward a 500kV Solid State Marx Modulator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF081, pp. 1792-1794.
[n] C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1391-1394.
[n] H. F. Kaiser, “Problems in the Design of Cryogenic Target Facilities for Electron Scattering Experiments”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 519-527.
[n] C. Pellegrini and D. Robin, “Electron Density Enhancement in a Quasi Isochronous Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 398-401.
[n] K. Floettmann, “Lattice Studies for a Large Dog-bone Damping Ring for TESLA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 509-512.
[n] R. Kersevan and C. Garion, “Design of the Vacuum System of the FCC-ee Electron-Positron Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1319-1322. doi:10.18429/JACoW-IPAC2019-TUPMP035
[n] B. P. Murin, “Ion Linacs Design with Superconductivity Use”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP42, pp. 755-757.
[n] L. Serafini, C. Pagani, and A. Peretti, “Space Charge Compensated RF Gun: A New Way to Ultra High Brightness Electron Beams”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 703-706.
[n] J. Qiang, “Start-to-End Beam Dynamics Optimization of X-Ray FEL Light Source Accelerators”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 838-842. doi:10.18429/JACoW-NAPAC2016-WEA3IO02
[n] Y. Mori, “Recent progresses on FFAG accelerators”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper MOAP04, pp. 16-19.
[n] A. K. Mitra, R. L. Poirier, and E. Jensen, “Coarse and Fine Tuners for the CERN PS 40 MHz Bunching Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P037, pp. 3060-3062.
[n] S. Lindb?ñck, “A Study of the Regenerative Extraction System in the CERN Synchrocyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C09, pp. XX-XX.
[n] W. S. C. Henry, “Power System Operation in the Cambridge Electron Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 517-519.
[n] Y. J. Lee and T. McClanahan, “Comparative study of decay heat calculations with FLUKA and MCNP/CINDER2008”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3833-3836. doi:10.18429/JACoW-IPAC2024-THPS43
[n] Y. Kamino, “10 MeV 25 KW Industrial Electron Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP70, pp. 836-838.
[n] S. Noguchi, E. Kako, and K. Kubo, “Couplers - Experience at KEK”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89E04, pp. XX-XX.
[n] M. Souda et al., “Stability Analysis Using EMTP for JHF Systems”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D011, pp. 405-407.
[n] M. Gusarova, M. V. Lalayan, N. P. Sobenin, and V. Zvyagintsev, “Multipacting Simulation in ISAC-II Superconducting Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP076, pp. 4488-4490.
[n] S. C. Schaller and P. A. Rose, “Data Acquisition Software for the LAMPF Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2308-2311.
[n] R. W. Goodwin and M. F. Shea, “The Distributed Control System for the Fermilab 200 MeV Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H07, pp. 277-280.
[n] Mingyang Li, Shoroku Ohnuma, “Comparison of Binning and Sorting of Magnets in the SSC High Energy Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 371-374.
[n] P. P. Wintersteiner and D. S. Edmonds, “Design of a 15-MeV CW Microtron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 749-756.
[n] L. Kaufman and L. Crooks, “Invited Paper: Role of NMR in the Context of Existing Medical Diagnostic Techniques”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper L01, pp. 519-525.
[n] M. Giovannozzi, “Proposal of a Relationship between Dynamic Aperture and Intensity Evolution in a Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE079, pp. 4704-4706.
[n] D. L. Burke, “Results from the Final Focus Test Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 23-28.
[n] R. Tomas, M. Bai, W. Fischer, V. Ptitsyn, T. Roser, and T. Satogata, “Quest for a New Working Point in RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT172, pp. 929-931.
[n] S. A. Bogacz and R. P. Johnson, “Recirculating Linear Muon Accelerator with Ramped Quadrupoles”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP048, pp. 2629-2631.
[n] K. Akai, “Beam Tests and Operation of Superconducting Cavities”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89C01, pp. XX-XX.
[n] A. V. Agafonov, A. N. Lebedev, and V. S. Voronin, “Hysteresis Effects in Drift Spaces and E-Guns”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP070L, pp. 1230-1232.
[n] M. Weiss, “The RFQ2 Complex: the Future Injector to CERN Linac 2”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 539-542.
[n] M. D. Roper, “A Soft X-ray Monochromator for the UK New Light Source (NLS)”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC18, pp. 542-545.
[n] A. V. Agafonov, A. N. Lebedev, and V. S. Voronin, “Spatial-Temporal Hysteresis Effects in an Intense Electron Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR13, pp. 3269-3271.
[n] V. Talanov et al., “Neutron Doses Due to Beam Losses in a Novel Concept of a Proton Therapy Gantry”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4736-4739. doi:10.18429/JACoW-IPAC2017-THPVA123
[n] J. Thibus and A. Schempp, “Simulations for the Frankfurt Funneling Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS043, pp. 1591-1593.
[n] E. J. Brookes, T. Kamps, and S. Zeeshan, “Multi-objective Bayesian optimisation (MOBO) for high-quality photoinjector optimisation”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3069, unpublished.
[n] E. C. Longhi, A. I. Baldwin, S. P. Mhaskar, J. C. Schouten, and C. W. Thompson, “Overview of Diamond IDs for Phase 1”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS128, pp. 3586-3588.
[n] A. Kanekar et al., “FLASHForward: experimental progress towards an idealised plasma-based energy booster”, presented at the IPAC'23, Venice, Italy, May 2023, paper THODA2, unpublished.
[n] B. Podobedov et al., “Recent Developments of the Soft X-ray Beam Position Monitor Project”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper THZE5, unpublished.
[n] A. V. Demyanov, S. L. Bogomolov, G. G. Gulbekian, V. B. Kutner, and R. Ts. Oganessian, “Radioactive Beam Injector for Short-Lived Heavy Ions”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-06, pp. 355-358.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Brinkmann, “HERA Status and Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
- N. Aquilina, “Expected and Measured Behaviour of the Tune in the LHC Operation at 3.5 TeV”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD025, pp. 3554-3556.
- R. Koscielniak, “Compensation of RF Transients During Injection into the Collector Ring of the TRIUMF KAON Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 377-380.
- S. A. Antipov and S. Nagaitsev, “Electron Cloud Trapping in Recycler Combined Function Dipole Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1200-1203.
- F. Zimmermann, G. Arduini, and C. Carli, “Localizing Impedance Sources from Betatron-phase Beating in the CERN SPS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT046, pp. 1939-1941.
- P. B. Wilson, “Current Status of Superconducting Accelerator Technology”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper D01, pp. 82-89.
- K.-T. Hsu et al., “BPM System and its Development for the Storage Ring of NSRRC”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW023, pp. XX-XX.
- N. A. Konjachin, P. P. Dmitriev, N. N. Krasnov, V. P. Lapin, V. N. Mironov, and M. V. Panarin, “On 123I Production by Irradiation of 124Xe with the Protons of Mean Energy”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-10, pp. 542-544.
- R. Cappi, M. Giovannozzi, and G. M?®tral, “The Proton Beams for the Time-of-Flight Neutron Facility at the CERN-PS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B10, pp. 1295-1297.
- D. R. Adcock, J. R. Beyster, and J. L. Cole, “The General Atomic Coupled Electron Linear Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 721-729.
- C. P. Welsch, “Studies into Electron Beam Generation, Acceleration and Diagnostics within LA3NET”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3256-3259.
- G. Devanz, “Bunch Length Measurement on CANDELA Photoinjector”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP44, pp. 761-763.
- A. Jacob and G. R. Lambertson, “Impedance Measurements on Button Electrodes”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1501-1504.
- H. Padamsee, “Superconducting Cavities from Niobium-Copper Material”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3354-3357.
- W. S. Graves, “The Source Development Lab Linac at BNL”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP50, pp. 776-778.
- J. S. Berg, “Head-Tail Mode Instability Caused by Feedback”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP10C, pp. 942-944.
- A. Kumar, A. Chatterjee, K. Mahata, and K. Ramachandran, “Development of Data Acquisition Software for VME Based System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD16, pp. 35-36.
- I. Hofmann and K. Beckert, “Resonance Crossing in the Presence of Space Charge”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2264-2267.
- V. Sajaev, B. Kuske, D. Schirmer, and G. Wuestefeld, “Optimization and Tracking Studies for the 1.7 GeV Light Source BESSY II”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 994-997.
- G. Leyh, “Development and Testing of the ILC Marx Modulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAC02, pp. 849-851.
- T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
- C. Montag and J. Kewisch, “Effect of Solenoid Field Errors on Electron Beam Temperatures in the RHIC Electron Cooler”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE030, pp. 2011-2013.
- P. Emma and G. V. Stupakov, “Limitations of Electron Beam Conditioning for Free-Electron Lasers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB049, pp. 926-928.
- B. Kalantari and T. Korhonen, “Timekeeping Mechanism at SLS/APS Control System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT049, pp. 1948-1950.
- K. J. O and J. R. Freeman, “Stochastic Electron Beams in the Ion-Focused Regime”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU433, pp. 393-395.
- T. Suwada and S. Ohsawa, “Recalibration of a Wall-Current Monitor Using a Beam-Induced Field for the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D055, pp. 528-530.
- J. S. Berg, “Longitudinal Ionization Cooling without Wedges”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA004, pp. 145-147.
- R. Bourque and G. Laughon, “Thermal Analysis of a Refined APT Power Coupler and Thermal Shield and the Effect on the Cryoplant”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH131, pp. 1083-1085.
- H. Jenhani and P. Carbonnier, “Experimental Validation of the Use of Cold Cathode Gauge inside the Cryomodule Insulation Vacuum”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 848.
- F. Zimmermann, M. Giovannozzi, and A. Xagkoni, “Interaction of Macro-Particles with the LHC Proton Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC016, pp. 492-494.
- G. Chapman, O. Groebner, G. Linser, T. Perry, and G. Schmidlin, “Synchrotron Radiation Lead Shielding of the Vacuum Chambers for LEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2340-2343.
- K. Batchelor, “Microwave Undulator”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-12, pp. 272-275.
- H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Frequency, Temperature, RF Field Dependent Surface Resistance Using Superconducting Half Wave Cavity”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 925-927.
- G. Leyh, “Prototype Development Progress toward a 500kV Solid State Marx Modulator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF081, pp. 1792-1794.
- C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1391-1394.
- H. F. Kaiser, “Problems in the Design of Cryogenic Target Facilities for Electron Scattering Experiments”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 519-527.
- C. Pellegrini and D. Robin, “Electron Density Enhancement in a Quasi Isochronous Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 398-401.
- K. Floettmann, “Lattice Studies for a Large Dog-bone Damping Ring for TESLA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 509-512.
- R. Kersevan and C. Garion, “Design of the Vacuum System of the FCC-ee Electron-Positron Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1319-1322.
- B. P. Murin, “Ion Linacs Design with Superconductivity Use”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP42, pp. 755-757.
- L. Serafini, C. Pagani, and A. Peretti, “Space Charge Compensated RF Gun: A New Way to Ultra High Brightness Electron Beams”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 703-706.
- J. Qiang, “Start-to-End Beam Dynamics Optimization of X-Ray FEL Light Source Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 838-842.
- Y. Mori, “Recent progresses on FFAG accelerators”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper MOAP04, pp. 16-19.
- A. K. Mitra, R. L. Poirier, and E. Jensen, “Coarse and Fine Tuners for the CERN PS 40 MHz Bunching Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P037, pp. 3060-3062.
- S. Lindb?ñck, “A Study of the Regenerative Extraction System in the CERN Synchrocyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C09, pp. XX-XX.
- W. S. C. Henry, “Power System Operation in the Cambridge Electron Accelerator”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 517-519.
- Y. J. Lee and T. McClanahan, “Comparative study of decay heat calculations with FLUKA and MCNP/CINDER2008”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS43, pp. 3833-3836.
- Y. Kamino, “10 MeV 25 KW Industrial Electron Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP70, pp. 836-838.
- S. Noguchi, E. Kako, and K. Kubo, “Couplers - Experience at KEK”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89E04, pp. XX-XX.
- M. Souda et al., “Stability Analysis Using EMTP for JHF Systems”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D011, pp. 405-407.
- M. Gusarova, M. V. Lalayan, N. P. Sobenin, and V. Zvyagintsev, “Multipacting Simulation in ISAC-II Superconducting Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP076, pp. 4488-4490.
- S. C. Schaller and P. A. Rose, “Data Acquisition Software for the LAMPF Control System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2308-2311.
- R. W. Goodwin and M. F. Shea, “The Distributed Control System for the Fermilab 200 MeV Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H07, pp. 277-280.
- Mingyang Li, Shoroku Ohnuma, “Comparison of Binning and Sorting of Magnets in the SSC High Energy Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 371-374.
- P. P. Wintersteiner and D. S. Edmonds, “Design of a 15-MeV CW Microtron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 749-756.
- L. Kaufman and L. Crooks, “Invited Paper: Role of NMR in the Context of Existing Medical Diagnostic Techniques”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper L01, pp. 519-525.
- M. Giovannozzi, “Proposal of a Relationship between Dynamic Aperture and Intensity Evolution in a Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE079, pp. 4704-4706.
- D. L. Burke, “Results from the Final Focus Test Beam”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 23-28.
- R. Tomas, M. Bai, W. Fischer, V. Ptitsyn, T. Roser, and T. Satogata, “Quest for a New Working Point in RHIC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT172, pp. 929-931.
- S. A. Bogacz and R. P. Johnson, “Recirculating Linear Muon Accelerator with Ramped Quadrupoles”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP048, pp. 2629-2631.
- K. Akai, “Beam Tests and Operation of Superconducting Cavities”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89C01, pp. XX-XX.
- A. V. Agafonov, A. N. Lebedev, and V. S. Voronin, “Hysteresis Effects in Drift Spaces and E-Guns”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP070L, pp. 1230-1232.
- M. Weiss, “The RFQ2 Complex: the Future Injector to CERN Linac 2”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 539-542.
- M. D. Roper, “A Soft X-ray Monochromator for the UK New Light Source (NLS)”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC18, pp. 542-545.
- A. V. Agafonov, A. N. Lebedev, and V. S. Voronin, “Spatial-Temporal Hysteresis Effects in an Intense Electron Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPR13, pp. 3269-3271.
- V. Talanov et al., “Neutron Doses Due to Beam Losses in a Novel Concept of a Proton Therapy Gantry”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4736-4739.
- J. Thibus and A. Schempp, “Simulations for the Frankfurt Funneling Experiment”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS043, pp. 1591-1593.
- E. J. Brookes, T. Kamps, and S. Zeeshan, “Multi-objective Bayesian optimisation (MOBO) for high-quality photoinjector optimisation”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3069, this conference.
- E. C. Longhi, A. I. Baldwin, S. P. Mhaskar, J. C. Schouten, and C. W. Thompson, “Overview of Diamond IDs for Phase 1”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS128, pp. 3586-3588.
- A. Kanekar et al., “FLASHForward: experimental progress towards an idealised plasma-based energy booster”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THODA2, unpublished.
- B. Podobedov et al., “Recent Developments of the Soft X-ray Beam Position Monitor Project”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper THZE5, unpublished.
- A. V. Demyanov, S. L. Bogomolov, G. G. Gulbekian, V. B. Kutner, and R. Ts. Oganessian, “Radioactive Beam Injector for Short-Lived Heavy Ions”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-06, pp. 355-358.
Back to search