Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Brinkmann, “HERA Status and Plans”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
[n] N. Aquilina, “Expected and Measured Behaviour of the Tune in the LHC Operation at 3.5 TeV”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD025, pp. 3554-3556.
[n] R. Koscielniak, “Compensation of RF Transients During Injection into the Collector Ring of the TRIUMF KAON Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 377-380.
[n] S. A. Antipov and S. Nagaitsev, “Electron Cloud Trapping in Recycler Combined Function Dipole Magnets”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1200-1203. doi:10.18429/JACoW-NAPAC2016-THPOA49
[n] F. Zimmermann, G. Arduini, and C. Carli, “Localizing Impedance Sources from Betatron-phase Beating in the CERN SPS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT046, pp. 1939-1941.
[n] P. B. Wilson, “Current Status of Superconducting Accelerator Technology”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper D01, pp. 82-89.
[n] K.-T. Hsu et al., “BPM System and its Development for the Storage Ring of NSRRC”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW023, pp. XX-XX.
[n] N. A. Konjachin, P. P. Dmitriev, N. N. Krasnov, V. P. Lapin, V. N. Mironov, and M. V. Panarin, “On 123I Production by Irradiation of 124Xe with the Protons of Mean Energy”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-10, pp. 542-544.
[n] R. Cappi, M. Giovannozzi, and G. M?®tral, “The Proton Beams for the Time-of-Flight Neutron Facility at the CERN-PS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B10, pp. 1295-1297.
[n] D. R. Adcock, J. R. Beyster, and J. L. Cole, “The General Atomic Coupled Electron Linear Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 721-729.
[n] C. P. Welsch, “Studies into Electron Beam Generation, Acceleration and Diagnostics within LA3NET”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3256-3259. doi:10.18429/JACoW-IPAC2015-WEPTY002
[n] G. Devanz, “Bunch Length Measurement on CANDELA Photoinjector”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP44, pp. 761-763.
[n] A. Jacob and G. R. Lambertson, “Impedance Measurements on Button Electrodes”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1501-1504.
[n] H. Padamsee, “Superconducting Cavities from Niobium-Copper Material”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3354-3357.
[n] W. S. Graves, “The Source Development Lab Linac at BNL”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP50, pp. 776-778.
[n] J. S. Berg, “Head-Tail Mode Instability Caused by Feedback”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP10C, pp. 942-944.
[n] A. Kumar, A. Chatterjee, K. Mahata, and K. Ramachandran, “Development of Data Acquisition Software for VME Based System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD16, pp. 35-36.
[n] I. Hofmann and K. Beckert, “Resonance Crossing in the Presence of Space Charge”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2264-2267.
[n] V. Sajaev, B. Kuske, D. Schirmer, and G. Wuestefeld, “Optimization and Tracking Studies for the 1.7 GeV Light Source BESSY II”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 994-997.
[n] G. Leyh, “Development and Testing of the ILC Marx Modulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC02, pp. 849-851.
[n] T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
[n] C. Montag and J. Kewisch, “Effect of Solenoid Field Errors on Electron Beam Temperatures in the RHIC Electron Cooler”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE030, pp. 2011-2013.
[n] P. Emma and G. V. Stupakov, “Limitations of Electron Beam Conditioning for Free-Electron Lasers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB049, pp. 926-928.
[n] B. Kalantari and T. Korhonen, “Timekeeping Mechanism at SLS/APS Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT049, pp. 1948-1950.
[n] K. J. O and J. R. Freeman, “Stochastic Electron Beams in the Ion-Focused Regime”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU433, pp. 393-395.
[n] T. Suwada and S. Ohsawa, “Recalibration of a Wall-Current Monitor Using a Beam-Induced Field for the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D055, pp. 528-530.
[n] J. S. Berg, “Longitudinal Ionization Cooling without Wedges”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA004, pp. 145-147.
[n] R. Bourque and G. Laughon, “Thermal Analysis of a Refined APT Power Coupler and Thermal Shield and the Effect on the Cryoplant”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH131, pp. 1083-1085.
[n] H. Jenhani and P. Carbonnier, “Experimental Validation of the Use of Cold Cathode Gauge inside the Cryomodule Insulation Vacuum”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 848. doi:10.18429/JACoW-SRF2021-THPTEV011
[n] F. Zimmermann, M. Giovannozzi, and A. Xagkoni, “Interaction of Macro-Particles with the LHC Proton Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC016, pp. 492-494.
[n] G. Chapman, O. Groebner, G. Linser, T. Perry, and G. Schmidlin, “Synchrotron Radiation Lead Shielding of the Vacuum Chambers for LEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2340-2343.
[n] K. Batchelor, “Microwave Undulator”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-12, pp. 272-275.
[n] H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Frequency, Temperature, RF Field Dependent Surface Resistance Using Superconducting Half Wave Cavity”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 925-927. doi:10.18429/JACoW-SRF2017-THPB080
[n] G. Leyh, “Prototype Development Progress toward a 500kV Solid State Marx Modulator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF081, pp. 1792-1794.
[n] C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1391-1394.
[n] H. F. Kaiser, “Problems in the Design of Cryogenic Target Facilities for Electron Scattering Experiments”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 519-527.
[n] C. Pellegrini and D. Robin, “Electron Density Enhancement in a Quasi Isochronous Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 398-401.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Brinkmann, “HERA Status and Plans”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG04, pp. 406-410.
- N. Aquilina, “Expected and Measured Behaviour of the Tune in the LHC Operation at 3.5 TeV”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD025, pp. 3554-3556.
- R. Koscielniak, “Compensation of RF Transients During Injection into the Collector Ring of the TRIUMF KAON Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 377-380.
- S. A. Antipov and S. Nagaitsev, “Electron Cloud Trapping in Recycler Combined Function Dipole Magnets”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1200-1203.
- F. Zimmermann, G. Arduini, and C. Carli, “Localizing Impedance Sources from Betatron-phase Beating in the CERN SPS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT046, pp. 1939-1941.
- P. B. Wilson, “Current Status of Superconducting Accelerator Technology”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper D01, pp. 82-89.
- K.-T. Hsu et al., “BPM System and its Development for the Storage Ring of NSRRC”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW023, pp. XX-XX.
- N. A. Konjachin, P. P. Dmitriev, N. N. Krasnov, V. P. Lapin, V. N. Mironov, and M. V. Panarin, “On 123I Production by Irradiation of 124Xe with the Protons of Mean Energy”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-10, pp. 542-544.
- R. Cappi, M. Giovannozzi, and G. M?®tral, “The Proton Beams for the Time-of-Flight Neutron Facility at the CERN-PS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B10, pp. 1295-1297.
- D. R. Adcock, J. R. Beyster, and J. L. Cole, “The General Atomic Coupled Electron Linear Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 721-729.
- C. P. Welsch, “Studies into Electron Beam Generation, Acceleration and Diagnostics within LA3NET”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3256-3259.
- G. Devanz, “Bunch Length Measurement on CANDELA Photoinjector”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP44, pp. 761-763.
- A. Jacob and G. R. Lambertson, “Impedance Measurements on Button Electrodes”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1501-1504.
- H. Padamsee, “Superconducting Cavities from Niobium-Copper Material”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3354-3357.
- W. S. Graves, “The Source Development Lab Linac at BNL”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP50, pp. 776-778.
- J. S. Berg, “Head-Tail Mode Instability Caused by Feedback”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP10C, pp. 942-944.
- A. Kumar, A. Chatterjee, K. Mahata, and K. Ramachandran, “Development of Data Acquisition Software for VME Based System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD16, pp. 35-36.
- I. Hofmann and K. Beckert, “Resonance Crossing in the Presence of Space Charge”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2264-2267.
- V. Sajaev, B. Kuske, D. Schirmer, and G. Wuestefeld, “Optimization and Tracking Studies for the 1.7 GeV Light Source BESSY II”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 994-997.
- G. Leyh, “Development and Testing of the ILC Marx Modulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAC02, pp. 849-851.
- T. Katayama, M. Okamura, T. Tominaka, and N. Tsoupas, “Design Study of Helical Partial Snake Magnet for AGS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B14, pp. 2116-2118.
- C. Montag and J. Kewisch, “Effect of Solenoid Field Errors on Electron Beam Temperatures in the RHIC Electron Cooler”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE030, pp. 2011-2013.
- P. Emma and G. V. Stupakov, “Limitations of Electron Beam Conditioning for Free-Electron Lasers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB049, pp. 926-928.
- B. Kalantari and T. Korhonen, “Timekeeping Mechanism at SLS/APS Control System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT049, pp. 1948-1950.
- K. J. O and J. R. Freeman, “Stochastic Electron Beams in the Ion-Focused Regime”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU433, pp. 393-395.
- T. Suwada and S. Ohsawa, “Recalibration of a Wall-Current Monitor Using a Beam-Induced Field for the KEKB Injector Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D055, pp. 528-530.
- J. S. Berg, “Longitudinal Ionization Cooling without Wedges”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA004, pp. 145-147.
- R. Bourque and G. Laughon, “Thermal Analysis of a Refined APT Power Coupler and Thermal Shield and the Effect on the Cryoplant”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH131, pp. 1083-1085.
- H. Jenhani and P. Carbonnier, “Experimental Validation of the Use of Cold Cathode Gauge inside the Cryomodule Insulation Vacuum”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 848.
- F. Zimmermann, M. Giovannozzi, and A. Xagkoni, “Interaction of Macro-Particles with the LHC Proton Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC016, pp. 492-494.
- G. Chapman, O. Groebner, G. Linser, T. Perry, and G. Schmidlin, “Synchrotron Radiation Lead Shielding of the Vacuum Chambers for LEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2340-2343.
- K. Batchelor, “Microwave Undulator”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-12, pp. 272-275.
- H. Park, S. U. De Silva, and J. R. Delayen, “Measurement of Frequency, Temperature, RF Field Dependent Surface Resistance Using Superconducting Half Wave Cavity”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 925-927.
- G. Leyh, “Prototype Development Progress toward a 500kV Solid State Marx Modulator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF081, pp. 1792-1794.
- C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1391-1394.
- H. F. Kaiser, “Problems in the Design of Cryogenic Target Facilities for Electron Scattering Experiments”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 519-527.
- C. Pellegrini and D. Robin, “Electron Density Enhancement in a Quasi Isochronous Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 398-401.
Back to search