Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Noda et al., “Pulse Stretcher Operation of the Electron Storage Ring, KSR”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE079, pp. 425-427.
[n] H. Rafique, E. K. Bansal, H. V. Cavanagh, and C. M. Warsop, “Recent Progress in Loss Control for the ISIS High-Intensity RCS: Geodetic Modelling, Tune Control, and Optimisation”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 153-157. doi:10.18429/JACoW-HB2023-TUA4C1
[n] P. Spaedtke, R. Lang, J. Maeder, F. Maimone, J. Rossbach, and K. Tinschert, “A Correction Scheme for the Hexapolar Error of an Ion Beam Extracted from an ECRIS”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper THCOAK01, pp. 191-193.
[n] P. K. Kankiya, J. P. Jamilkowski, and A. Sukhanov, “Automated Testing and Validation of Control Parameters”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. XX-XX. doi:10.18429/JACoW-ICALEPCS2019-WECPR04
[n] M. Han, H. Zha, L. Zhang, and X. Zhang, “A FLASH-RT experimental platform and technology research progress”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS096, unpublished.
[n] J.-Y. Huang et al., “Operational Status of the Pohang Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI014, pp. 688-690.
[n] B. Sims, J. Lewellen, S. Baryshev, and T. Xu, “Two slit emittance measurement with thermal emittance isolation for an SRF injector”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG62, unpublished.
[n] K. Deitrick, “Microbunching gain evaluation of bunch compressor designs”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS106, unpublished.
[n] G. LeBlanc, M. Eriksson, L-J. Lindgren, P. R, and S. Werin, “Status of the MAX-II Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W009, pp. 345-347.
[n] W. H?Âfle, “Status and Prospects in Fast Beam-Based Feedbacks”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3112-3117. doi:10.18429/JACoW-IPAC2022-FRIXGD1
[n] V. Rodin, A. Farricker, S. Padden, J. Resta-L??pez, and C. P. Welsch, “Realistic Simulations of Stray Field Impact on Low Energy Transfer Lines”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3130-3133. doi:10.18429/JACoW-IPAC2021-WEPAB214
[n] N. R. Stevenson, “Construction and Operation of Cyclotrons for Medical Isotopes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ04T, pp. 249-251.
[n] P. Fernandez Carmona et al., “Continuous Beam Scanning Intensity Control of a Medical Proton Accelerator Using a Simulink Generated FPGA Gain Scheduled Controller”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 242-247. doi:10.18429/JACoW-PCaPAC2018-FRCC2
[n] M. Kreller, T. Knie?ƒ, and S. Preusche, “The Cyclotron TR-FLEX at the Center for Radiopharmaceutical Cancer Research at Helmholtz-Zentrum Dresden-Rossendorf”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 166-168. doi:10.18429/JACoW-CYCLOTRONS2019-TUP008
[n] G. M. Ge, R. G. Eichhorn, and F. Furuta, “Cooling Front Measurement of a 9-Cell Cavity via the Multi-Cell Temperature-Mapping System at Cornell University”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB083, pp. 324-327.
[n] S. Brooks, “Proposed Ultralow-Emittance Beam Source for High-Luminosity Hadron Colliders”, in Proc. COOL'25, Stony Brook, NY, USA, Oct. 2025, pp. 73-78. doi:10.18429/JACoW-COOL2025-WEB3
[n] C. S. Hsue, C. C. Kuo, J. C. Lee, and M. H. Wang, “Lattice Design of the SRRC 1.3 GeV Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2670-2673.
[n] I. Sakai et al., “Operation of the Opposite-Field Septum Magnet for the J-PARC Main-Ring Injection”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS107, pp. 1750-1752.
[n] R. J. Briggs, “Status of the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3922-3926.
[n] J. Yang, P. Boutachkov, P. Forck, T. Milosic, R. Singh, and S. Sorge, “Beam Characterization of Slow Extraction Measurement at GSI-SIS18 for Transverse Emittance Exchange Experiments”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 318-322. doi:10.18429/JACoW-IBIC2022-TUP36
[n] P. Tzanis, “The Control System of the New Small Wheel Electronics for the Atlas Experiment”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1005-1010. doi:10.18429/JACoW-ICALEPCS2021-FRAL04
[n] K. Paraschou, G. Iadarola, N. Karastathis, S. Kostoglou, Y. Papaphilippou, and L. Sabato, “Analysis on Bunch-by-Bunch Beam Losses at 6.5 TeV in the Large Hadron Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 500-503. doi:10.18429/JACoW-IPAC2019-MOPMP029
[n] J. A. Carwardine, S. V. Milton, and D. G. McGhee, “Performance of the Ramping Power Supplies for the APS Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP03, pp. 1967-1969.
[n] H. Schweickert, “SULEICKA: A Proposal for a Superconducting Light Ion Cyclotron at Karlsruhe”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-03, pp. 221-223.
[n] G. Parzen, “Controlling Non-Linear Resonances in Superconducting Storage Accelerators”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 819-822.
[n] D. Kahl et al., “Beam diagnostics in ARIS to investigate wedge defect at FRIB”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 254-257. doi:10.18429/JACoW-HIAT2025-WEP14
[n] A. Ts. Amatuni, “Self-Acceleration of Electrons in One-Dimensional Bunches, Moving in Cold Plasma”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V024, pp. 693-694.
[n] E. Yamakawa et al., “Study of Single Wire Scanner Monitor for FETS-FFA Test Ring”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 377-381. doi:10.18429/JACoW-IBIC2023-WEP019
[n] M. Semeraro et al., “Delta Robot 2.0: The Nano-Positioning System for the Hard X-ray Nanoprobe at the Australian Synchrotron.”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THPPP018, unpublished.
[n] H.-W. Glock, H. Ecklebe, T. Flisgen, N. Baboi, and P. Zhang, “Diode Down-mixing of HOM Coupler Signals for Beam Position Determination in 1.3-GHz- and 3.9-GHz-Cavities at FLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD25, pp. 101-103.
[n] V. V. Parkhomchuk et al., “The Status of the Electron Cooling System for the NICA Collider”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 55-58. doi:10.18429/JACoW-COOL2019-THX01
[n] P. K. Skowro, M. A. Fraser, and I. Vojskovic, “Experience with Computer-Aided Optimizations in LINAC4 and PSB at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 945-948. doi:10.18429/JACoW-IPAC2022-TUPOST041
[n] H. Zhang et al., “Deterministic Longitudinal Control of Electron Beams for Universal Light Sources via Spatiotemporal Laser Shaping: Demonstration at LCLS-II”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2323, unpublished.
[n] A. Navitski, E. Elsen, V. Myronenko, J. Schaffran, O. Turkot, and Y. Tamashevich, “Characterization of Surface Defects on EXFEL Series and ILC-Higrade Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB072, pp. 281-285.
[n] R. Poirier et al., “Determination of the rf Leakage Field in the Vacuum Tank of the TRIUMF Cyclotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3514-3517.
[n] J.-Y. Hemery, A. Hofmann, J.-P. Koutchouk, S. Myers, and L. Vos, “Investigation of the Coherent Beam-Beam Effects in the ISR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2497-2500.
[n] F. Becker, “Beam Induced Fluorescence Monitors”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOD01, pp. 575-579.
[n] Z.-J. Zhang and W. Liu, “A compact linear accelerator coaxially integrated with a high-power microwave source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM088, unpublished.
[n] N. Akasaka et al., “Fundamental Mode Characteristics of ARES Cavity Under Beam Environment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P030, pp. 2974-2976.
[n] T. O. Raubenheimer and R. A. Early, “Computer Studies of a Combined-Function Bend Magnet for a Proposed Redesign of the SLAC SLC Damping Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2880-2883.
[n] T. Powers, N. C. Brock, and T. D. Ganey, “In Situ Plasma Processing of Superconducting Cavities at JLab, 2023 Update”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 701-705. doi:10.18429/JACoW-SRF2023-WEPWB054
[n] S. Berry, C. Z. Antoine, and M. Desmons, “Surface Morphology at the Quench Site”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF018, pp. 1000-1002.
[n] C. Fischer, G. Guignard, and A. Millich, “Investigations on Beam Damping Simulations and the Associated Model of CLIC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3234-3237.
[n] H. Kleines et al., “Architecture of the Control System for the Jülich High Brilliance Neutron Source”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 565-569. doi:10.18429/JACoW-ICALEPCS2023-TUPDP029
[n] J. F. Schmerge et al., “The LCLS-II Injector Design”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP042, pp. 815-819.
[n] Y. M. Li, G. X. Xia, Y. Zhao, K. V. Lotov, and A. Sosedkin, “Amplitude Enhancement of the Self-Modulated Plasma Wakefields”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1585-1588. doi:10.18429/JACoW-IPAC2018-TUPML023
[n] S. Heifets, K. Ohmi, and F. Zimmermann, “STUDY OF COHERENT TUNE SHIFT CAUSED BY ELECTRON CLOUD IN POSITRON STORAGE RINGS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP056, pp. XX-XX.
[n] M. Kinsho, “Status of the J-PARC 3-GeV RCS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP065, pp. 1436-1438.
[n] G. Westenskow, G. Caporaso, Y. Chen, T. Houck, and S. Sampayan, “Double Pulse Experiment with a Velvet Cathode on the ATA Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC16, pp. 1027-1029.
[n] M. Mayerhofer et al., “The potential of multi-material additive manufacturing illustrated by an RFQ prototype”, presented at the IPAC'26, Deauville, France, May 2026, paper MOV7004, unpublished.
[n] R. Zhang et al., “Emittance Measurements of the 4.5 MeV UCLA RF Photo-Injector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 561-564.
[n] Z. J. Wang, W. L. Chen, and Y. He, “The Beam Commissioning of China Accelerator for Research on Superheavy Elements”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper THC1I3, unpublished.
[n] Z. Reszela, F. Becheri, O. Vallcorba, R. Homs Puron, and S. Rubio-Manrique, “Towards sustainable work management in scientific facilities: applying Kanban at ALBA Controls”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper TUPD051, unpublished.
[n] J. F. DeFord, B. H. Held, V. Ivanov, and K. Ko, “Calculation of Beam-Loaded Q in High-Power Klystrons”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT080, pp. 4060-4062.
[n] M. G. Breitfeller and S. L. Kramer, “Innovative Design of Radiation Shielding for Synchrotron Light Sources”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 321-323. doi:10.18429/JACoW-MEDSI2016-WEPE05
[n] H. Vera Ruiz and R. M. Lambrecht, “Trends in Cyclotrons for Radionuclide Production”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-05, pp. 28-30.
[n] N. Yamamoto, S. Sakanaka, and T. Takahashi, “Simulation Study of Normal-Conducting Double RF System for the 3-GeV KEK Light Source Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4176-4179. doi:10.18429/JACoW-IPAC2017-THPIK037
[n] Z. Jin et al., “A significant step towards robust table-top XUV-FEL”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB098, unpublished.
[n] F. Micolon et al., “Mechanical Consolidation of the LHC Inner Triplet Magnet Supporting System for Remote Alignment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2207-2209. doi:10.18429/JACoW-IPAC2021-TUPAB308
[n] A. H. Lumpkin, R. J. Dejus, and D. W. Rule, “First Direct Comparisons of a COTRI Analytical Model to Data from a SASE FEL at 540, 265, and 157 nm”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS49, pp. XX-XX.
[n] H. Lovelace III et al., “The Electron-Ion Collider Hadron Storage Ring 10 OÔÇÖclock Switchyard Design”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2071-2073. doi:10.18429/JACoW-IPAC2022-WEPOTK015
[n] H. Vormann, W. A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, and S. Yaramyshev, “High Intensity Heavy Ion Beam Optimization at GSI UNILAC”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 110-113. doi:10.18429/JACoW-LINAC2022-MOPOPA18
For LaTeX
Use Complete Form
For BibTeX
References
- A. Noda et al., “Pulse Stretcher Operation of the Electron Storage Ring, KSR”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE079, pp. 425-427.
- H. Rafique, E. K. Bansal, H. V. Cavanagh, and C. M. Warsop, “Recent Progress in Loss Control for the ISIS High-Intensity RCS: Geodetic Modelling, Tune Control, and Optimisation”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA4C1, pp. 153-157.
- P. Spaedtke, R. Lang, J. Maeder, F. Maimone, J. Rossbach, and K. Tinschert, “A Correction Scheme for the Hexapolar Error of an Ion Beam Extracted from an ECRIS”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper THCOAK01, pp. 191-193.
- P. K. Kankiya, J. P. Jamilkowski, and A. Sukhanov, “Automated Testing and Validation of Control Parameters”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. XX-XX.
- M. Han, H. Zha, L. Zhang, and X. Zhang, “A FLASH-RT experimental platform and technology research progress”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS096, unpublished.
- J.-Y. Huang et al., “Operational Status of the Pohang Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI014, pp. 688-690.
- B. Sims, J. Lewellen, S. Baryshev, and T. Xu, “Two slit emittance measurement with thermal emittance isolation for an SRF injector”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG62, unpublished.
- K. Deitrick, “Microbunching gain evaluation of bunch compressor designs”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS106, unpublished.
- G. LeBlanc, M. Eriksson, L-J. Lindgren, P. R, and S. Werin, “Status of the MAX-II Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W009, pp. 345-347.
- W. H?Âfle, “Status and Prospects in Fast Beam-Based Feedbacks”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3112-3117.
- V. Rodin, A. Farricker, S. Padden, J. Resta-L??pez, and C. P. Welsch, “Realistic Simulations of Stray Field Impact on Low Energy Transfer Lines”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3130-3133.
- N. R. Stevenson, “Construction and Operation of Cyclotrons for Medical Isotopes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEZ04T, pp. 249-251.
- P. Fernandez Carmona et al., “Continuous Beam Scanning Intensity Control of a Medical Proton Accelerator Using a Simulink Generated FPGA Gain Scheduled Controller”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 242-247.
- M. Kreller, T. Knie?ƒ, and S. Preusche, “The Cyclotron TR-FLEX at the Center for Radiopharmaceutical Cancer Research at Helmholtz-Zentrum Dresden-Rossendorf”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 166-168.
- G. M. Ge, R. G. Eichhorn, and F. Furuta, “Cooling Front Measurement of a 9-Cell Cavity via the Multi-Cell Temperature-Mapping System at Cornell University”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB083, pp. 324-327.
- S. Brooks, “Proposed Ultralow-Emittance Beam Source for High-Luminosity Hadron Colliders”, in Proc. 15th International Workshop on Beam Cooling and Related Topics (COOL'25), Stony Brook, NY, USA, Oct. 2025, paper WEB3, pp. 73-78.
- C. S. Hsue, C. C. Kuo, J. C. Lee, and M. H. Wang, “Lattice Design of the SRRC 1.3 GeV Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2670-2673.
- I. Sakai et al., “Operation of the Opposite-Field Septum Magnet for the J-PARC Main-Ring Injection”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS107, pp. 1750-1752.
- R. J. Briggs, “Status of the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3922-3926.
- J. Yang, P. Boutachkov, P. Forck, T. Milosic, R. Singh, and S. Sorge, “Beam Characterization of Slow Extraction Measurement at GSI-SIS18 for Transverse Emittance Exchange Experiments”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 318-322.
- P. Tzanis, “The Control System of the New Small Wheel Electronics for the Atlas Experiment”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 1005-1010.
- K. Paraschou, G. Iadarola, N. Karastathis, S. Kostoglou, Y. Papaphilippou, and L. Sabato, “Analysis on Bunch-by-Bunch Beam Losses at 6.5 TeV in the Large Hadron Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 500-503.
- J. A. Carwardine, S. V. Milton, and D. G. McGhee, “Performance of the Ramping Power Supplies for the APS Booster Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP03, pp. 1967-1969.
- H. Schweickert, “SULEICKA: A Proposal for a Superconducting Light Ion Cyclotron at Karlsruhe”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CP-03, pp. 221-223.
- G. Parzen, “Controlling Non-Linear Resonances in Superconducting Storage Accelerators”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 819-822.
- D. Kahl et al., “Beam diagnostics in ARIS to investigate wedge defect at FRIB”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEP14, pp. 254-257.
- A. Ts. Amatuni, “Self-Acceleration of Electrons in One-Dimensional Bunches, Moving in Cold Plasma”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V024, pp. 693-694.
- E. Yamakawa et al., “Study of Single Wire Scanner Monitor for FETS-FFA Test Ring”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP019, pp. 377-381.
- M. Semeraro et al., “Delta Robot 2.0: The Nano-Positioning System for the Hard X-ray Nanoprobe at the Australian Synchrotron.”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper THPPP018, unpublished.
- H.-W. Glock, H. Ecklebe, T. Flisgen, N. Baboi, and P. Zhang, “Diode Down-mixing of HOM Coupler Signals for Beam Position Determination in 1.3-GHz- and 3.9-GHz-Cavities at FLASH”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD25, pp. 101-103.
- V. V. Parkhomchuk et al., “The Status of the Electron Cooling System for the NICA Collider”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 55-58.
- P. K. Skowro, M. A. Fraser, and I. Vojskovic, “Experience with Computer-Aided Optimizations in LINAC4 and PSB at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 945-948.
- H. Zhang et al., “Deterministic Longitudinal Control of Electron Beams for Universal Light Sources via Spatiotemporal Laser Shaping: Demonstration at LCLS-II”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2323, this conference.
- A. Navitski, E. Elsen, V. Myronenko, J. Schaffran, O. Turkot, and Y. Tamashevich, “Characterization of Surface Defects on EXFEL Series and ILC-Higrade Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB072, pp. 281-285.
- R. Poirier et al., “Determination of the rf Leakage Field in the Vacuum Tank of the TRIUMF Cyclotron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3514-3517.
- J.-Y. Hemery, A. Hofmann, J.-P. Koutchouk, S. Myers, and L. Vos, “Investigation of the Coherent Beam-Beam Effects in the ISR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2497-2500.
- F. Becker, “Beam Induced Fluorescence Monitors”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper WEOD01, pp. 575-579.
- Z.-J. Zhang and W. Liu, “A compact linear accelerator coaxially integrated with a high-power microwave source”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM088, unpublished.
- N. Akasaka et al., “Fundamental Mode Characteristics of ARES Cavity Under Beam Environment”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P030, pp. 2974-2976.
- T. O. Raubenheimer and R. A. Early, “Computer Studies of a Combined-Function Bend Magnet for a Proposed Redesign of the SLAC SLC Damping Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2880-2883.
- T. Powers, N. C. Brock, and T. D. Ganey, “In Situ Plasma Processing of Superconducting Cavities at JLab, 2023 Update”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB054, pp. 701-705.
- S. Berry, C. Z. Antoine, and M. Desmons, “Surface Morphology at the Quench Site”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF018, pp. 1000-1002.
- C. Fischer, G. Guignard, and A. Millich, “Investigations on Beam Damping Simulations and the Associated Model of CLIC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3234-3237.
- H. Kleines et al., “Architecture of the Control System for the Jülich High Brilliance Neutron Source”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP029, pp. 565-569.
- J. F. Schmerge et al., “The LCLS-II Injector Design”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP042, pp. 815-819.
- Y. M. Li, G. X. Xia, Y. Zhao, K. V. Lotov, and A. Sosedkin, “Amplitude Enhancement of the Self-Modulated Plasma Wakefields”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1585-1588.
- S. Heifets, K. Ohmi, and F. Zimmermann, “STUDY OF COHERENT TUNE SHIFT CAUSED BY ELECTRON CLOUD IN POSITRON STORAGE RINGS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP056, pp. XX-XX.
- M. Kinsho, “Status of the J-PARC 3-GeV RCS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP065, pp. 1436-1438.
- G. Westenskow, G. Caporaso, Y. Chen, T. Houck, and S. Sampayan, “Double Pulse Experiment with a Velvet Cathode on the ATA Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC16, pp. 1027-1029.
- M. Mayerhofer et al., “The potential of multi-material additive manufacturing illustrated by an RFQ prototype”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOV7004, this conference.
- R. Zhang et al., “Emittance Measurements of the 4.5 MeV UCLA RF Photo-Injector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 561-564.
- Z. J. Wang, W. L. Chen, and Y. He, “The Beam Commissioning of China Accelerator for Research on Superheavy Elements”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THC1I3, unpublished.
- Z. Reszela, F. Becheri, O. Vallcorba, R. Homs Puron, and S. Rubio-Manrique, “Towards sustainable work management in scientific facilities: applying Kanban at ALBA Controls”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper TUPD051, unpublished.
- J. F. DeFord, B. H. Held, V. Ivanov, and K. Ko, “Calculation of Beam-Loaded Q in High-Power Klystrons”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT080, pp. 4060-4062.
- M. G. Breitfeller and S. L. Kramer, “Innovative Design of Radiation Shielding for Synchrotron Light Sources”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 321-323.
- H. Vera Ruiz and R. M. Lambrecht, “Trends in Cyclotrons for Radionuclide Production”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-05, pp. 28-30.
- N. Yamamoto, S. Sakanaka, and T. Takahashi, “Simulation Study of Normal-Conducting Double RF System for the 3-GeV KEK Light Source Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4176-4179.
- Z. Jin et al., “A significant step towards robust table-top XUV-FEL”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB098, unpublished.
- F. Micolon et al., “Mechanical Consolidation of the LHC Inner Triplet Magnet Supporting System for Remote Alignment”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2207-2209.
- A. H. Lumpkin, R. J. Dejus, and D. W. Rule, “First Direct Comparisons of a COTRI Analytical Model to Data from a SASE FEL at 540, 265, and 157 nm”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS49, pp. XX-XX.
- H. Lovelace III et al., “The Electron-Ion Collider Hadron Storage Ring 10 OÔÇÖclock Switchyard Design”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2071-2073.
- H. Vormann, W. A. Barth, M. Miski-Oglu, U. Scheeler, M. Vossberg, and S. Yaramyshev, “High Intensity Heavy Ion Beam Optimization at GSI UNILAC”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 110-113.
Back to search