JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Noda et al., “Pulse Stretcher Operation of the Electron Storage Ring, KSR”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE079, pp. 425-427. 
[n]	H. Rafique, E. K. Bansal, H. V. Cavanagh, and C. M. Warsop, “Recent Progress in Loss Control for the ISIS High-Intensity RCS: Geodetic Modelling, Tune Control, and Optimisation”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 153-157. doi:10.18429/JACoW-HB2023-TUA4C1
[n]	P. Spaedtke, R. Lang, J. Maeder, F. Maimone, J. Rossbach, and K. Tinschert, “A Correction Scheme for the Hexapolar Error of an Ion Beam Extracted from an ECRIS”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper THCOAK01, pp. 191-193. 
[n]	P. K. Kankiya, J. P. Jamilkowski, and A. Sukhanov, “Automated Testing and Validation of Control Parameters”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. XX-XX. doi:10.18429/JACoW-ICALEPCS2019-WECPR04
[n]	M. Han, H. Zha, L. Zhang, and X. Zhang, “A FLASH-RT experimental platform and technology research progress”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS096, unpublished. 
[n]	J.-Y. Huang et al., “Operational Status of the Pohang Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI014, pp. 688-690. 
[n]	B. Sims, J. Lewellen, S. Baryshev, and T. Xu, “Two slit emittance measurement with thermal emittance isolation for an SRF injector”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG62, unpublished. 
[n]	K. Deitrick, “Microbunching gain evaluation of bunch compressor designs”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS106, unpublished. 
[n]	G. LeBlanc, M. Eriksson, L-J. Lindgren, P. R, and S. Werin, “Status of the MAX-II Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W009, pp. 345-347. 
[n]	W. H?Âfle, “Status and Prospects in Fast Beam-Based Feedbacks”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3112-3117. doi:10.18429/JACoW-IPAC2022-FRIXGD1
[n]	V. Rodin, A. Farricker, S. Padden, J. Resta-L??pez, and C. P. Welsch, “Realistic Simulations of Stray Field Impact on Low Energy Transfer Lines”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3130-3133. doi:10.18429/JACoW-IPAC2021-WEPAB214
[n]	N. R. Stevenson, “Construction and Operation of Cyclotrons for Medical Isotopes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ04T, pp. 249-251. 
[n]	P. Fernandez Carmona et al., “Continuous Beam Scanning Intensity Control of a Medical Proton Accelerator Using a Simulink Generated FPGA Gain Scheduled Controller”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 242-247. doi:10.18429/JACoW-PCaPAC2018-FRCC2
[n]	M. Kreller, T. Knie?ƒ, and S. Preusche, “The Cyclotron TR-FLEX at the Center for Radiopharmaceutical Cancer Research at Helmholtz-Zentrum Dresden-Rossendorf”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 166-168. doi:10.18429/JACoW-CYCLOTRONS2019-TUP008
[n]	G. M. Ge, R. G. Eichhorn, and F. Furuta, “Cooling Front Measurement of a 9-Cell Cavity via the Multi-Cell Temperature-Mapping System at Cornell University”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB083, pp. 324-327. 
[n]	S. Brooks, “Proposed Ultralow-Emittance Beam Source for High-Luminosity Hadron Colliders”, in Proc. COOL'25, Stony Brook, NY, USA, Oct. 2025, pp. 73-78. doi:10.18429/JACoW-COOL2025-WEB3
[n]	C. S. Hsue, C. C. Kuo, J. C. Lee, and M. H. Wang, “Lattice Design of the SRRC 1.3 GeV Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2670-2673. 
[n]	I. Sakai et al., “Operation of the Opposite-Field Septum Magnet for the J-PARC Main-Ring Injection”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS107, pp. 1750-1752. 
[n]	R. J. Briggs, “Status of the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3922-3926. 
[n]	J. Yang, P. Boutachkov, P. Forck, T. Milosic, R. Singh, and S. Sorge, “Beam Characterization of Slow Extraction Measurement at GSI-SIS18 for Transverse Emittance Exchange Experiments”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 318-322. doi:10.18429/JACoW-IBIC2022-TUP36
[n]	P. Tzanis, “The Control System of the New Small Wheel Electronics for the Atlas Experiment”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1005-1010. doi:10.18429/JACoW-ICALEPCS2021-FRAL04
[n]	K. Paraschou, G. Iadarola, N. Karastathis, S. Kostoglou, Y. Papaphilippou, and L. Sabato, “Analysis on Bunch-by-Bunch Beam Losses at 6.5 TeV in the Large Hadron Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 500-503. doi:10.18429/JACoW-IPAC2019-MOPMP029
[n]	J. A. Carwardine, S. V. Milton, and D. G. McGhee, “Performance of the Ramping Power Supplies for the APS Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP03, pp. 1967-1969. 
[n]	H. Schweickert, “SULEICKA: A Proposal for a Superconducting Light Ion Cyclotron at Karlsruhe”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-03, pp. 221-223. 
[n]	G. Parzen, “Controlling Non-Linear Resonances in Superconducting Storage Accelerators”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 819-822. 
[n]	D. Kahl et al., “Beam diagnostics in ARIS to investigate wedge defect at FRIB”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 254-257. doi:10.18429/JACoW-HIAT2025-WEP14
[n]	A. Ts. Amatuni, “Self-Acceleration of Electrons in One-Dimensional Bunches, Moving in Cold Plasma”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V024, pp. 693-694. 
[n]	E. Yamakawa et al., “Study of Single Wire Scanner Monitor for FETS-FFA Test Ring”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 377-381. doi:10.18429/JACoW-IBIC2023-WEP019
[n]	M. Semeraro et al., “Delta Robot 2.0: The Nano-Positioning System for the Hard X-ray Nanoprobe at the Australian Synchrotron.”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THPPP018, unpublished. 
[n]	H.-W. Glock, H. Ecklebe, T. Flisgen, N. Baboi, and P. Zhang, “Diode Down-mixing of HOM Coupler Signals for Beam Position Determination in 1.3-GHz- and 3.9-GHz-Cavities at FLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD25, pp. 101-103. 
[n]	V. V. Parkhomchuk et al., “The Status of the Electron Cooling System for the NICA Collider”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 55-58. doi:10.18429/JACoW-COOL2019-THX01
[n]	P. K. Skowro, M. A. Fraser, and I. Vojskovic, “Experience with Computer-Aided Optimizations in LINAC4 and PSB at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 945-948. doi:10.18429/JACoW-IPAC2022-TUPOST041
[n]	H. Zhang et al., “Deterministic Longitudinal Control of Electron Beams for Universal Light Sources via Spatiotemporal Laser Shaping: Demonstration at LCLS-II”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2323, unpublished. 
[n]	A. Navitski, E. Elsen, V. Myronenko, J. Schaffran, O. Turkot, and Y. Tamashevich, “Characterization of Surface Defects on EXFEL Series and ILC-Higrade Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB072, pp. 281-285. 
[n]	R. Poirier et al., “Determination of the rf Leakage Field in the Vacuum Tank of the TRIUMF Cyclotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3514-3517. 
[n]	J.-Y. Hemery, A. Hofmann, J.-P. Koutchouk, S. Myers, and L. Vos, “Investigation of the Coherent Beam-Beam Effects in the ISR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2497-2500. 
[n]	F. Becker, “Beam Induced Fluorescence Monitors”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOD01, pp. 575-579. 
[n]	Z.-J. Zhang and W. Liu, “A compact linear accelerator coaxially integrated with a high-power microwave source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM088, unpublished. 
[n]	N. Akasaka et al., “Fundamental Mode Characteristics of ARES Cavity Under Beam Environment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P030, pp. 2974-2976. 
[n]	T. O. Raubenheimer and R. A. Early, “Computer Studies of a Combined-Function Bend Magnet for a Proposed Redesign of the SLAC SLC Damping Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2880-2883. 
[n]	T. Powers, N. C. Brock, and T. D. Ganey, “In Situ Plasma Processing of Superconducting Cavities at JLab, 2023 Update”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 701-705. doi:10.18429/JACoW-SRF2023-WEPWB054
[n]	S. Berry, C. Z. Antoine, and M. Desmons, “Surface Morphology at the Quench Site”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF018, pp. 1000-1002. 
[n]	C. Fischer, G. Guignard, and A. Millich, “Investigations on Beam Damping Simulations and the Associated Model of CLIC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3234-3237. 
[n]	H. Kleines et al., “Architecture of the Control System for the Jülich High Brilliance Neutron Source”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 565-569. doi:10.18429/JACoW-ICALEPCS2023-TUPDP029
[n]	J. F. Schmerge et al., “The LCLS-II Injector Design”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP042, pp. 815-819. 
[n]	Y. M. Li, G. X. Xia, Y. Zhao, K. V. Lotov, and A. Sosedkin, “Amplitude Enhancement of the Self-Modulated Plasma Wakefields”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1585-1588. doi:10.18429/JACoW-IPAC2018-TUPML023

For LaTeX

Use Complete Form

For BibTeX

References

Back to search