JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. Montag et al., “Operational Experience with a Near-integer Working Point at RHIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP018, pp. 2563-2565. 
[n]	C. Y. Wu et al., “Preliminary Testing of TPS Timing System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO041, pp. 574-576. 
[n]	V. V. Danilov, “Future Prospects for Laser Stripping Injection in High Intensity Machines”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC06, pp. 284-289. 
[n]	J. Zhu, M. H. Fang, J. Wang, and Z. Y. Wei, “Timing Window and Optimization for Position Resolution and Energy Calibration of Scintillation Detector”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 372-375. doi:10.18429/JACoW-IBIC2016-TUPG22
[n]	T. Katayama, M. Steck, R. Maier, D. Prasuhn, and H. Stockhorst, “Electron Cooling of Heavy Ions Interacting with Internal Target at HESR of FAIR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA017, pp. 103-105. 
[n]	P.-A. Duperrex, G. G. Gamma, B. Keil, and M. U. M??ller, “Digital Analysis of Beam Diagnostic Noise”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB19, pp. 271-273. 
[n]	V. Korchuganov et al., “The Development of Synchrotron Radiation Source of NRC Kurchatov Institute""”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THXCH02, pp. 126-130. 
[n]	E. Perevedentsev and A. L. Romanov, “Eddy-current Effect on Field Multipoles Arising in Dipole Magnets with Elliptic and Rectangular Beam Pipe”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC160, pp. 2383-2385. 
[n]	H. Sakaki et al., “The Control Sysytem for J-PARC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16028, pp. XX-XX. 
[n]	E. M. Rowe, “Update on Aladdin”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 391-395. 
[n]	M. del Campo, M. G. Giacchini, L. G. Giovannini, and J. Jugo, “EPICS HyperArchiver: initial tests at ESSBilbao”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC154, pp. 2343-2345. 
[n]	F. Khan, D. Crivelli, J. H. Kelly, and A. Male, “Development of a Passive Tuned Mass Damper for Ultra-High Vacuum Beamline Optics”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 115. doi:10.18429/JACoW-MEDSI2020-TUOB02
[n]	O. A. Anderson et al., “ESQ-Focused 2.5 MeV DC Accelerator for BNCT”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2619-2622. 
[n]	C.-Y. Tan, L. R. Prost, K. Seiya, and A. K. Triplett, “Optics Corrections with LOCO in the Fermilab Booster”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3385-3387. doi:10.18429/JACoW-IPAC2016-THPMR002
[n]	N. S. Ishioka S, “EXTENSION OF THE IRRADIATION SYSTEM AT TIARA FOR PRODUCTION OF RADIOISOTOPES TO BE USED IN PLANT PHYSIOLOGY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P12, pp. XX-XX. 
[n]	S. Federmann, F. Caspers, B. Juhasz, E. Mahner, and E. Widmann, “Design of a 1.42 GHz Spin-Flip Cavity for Antihydrogen Atoms”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE054, pp. 1095-1097. 
[n]	J. Chiba et al., “A Control System of the Joint-Project Accelerator Complex”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP002, pp. XX-XX. 
[n]	B. Humann et al., “Challenges and mitigation measures for synchrotron radiation on the FCC-ee arcs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 292-295. doi:10.18429/JACoW-IPAC2024-MOPG04
[n]	H. M. Luo et al., “The Survey Status at NSRRC during the TPS Civil Construction”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO032, pp. 553-555. 
[n]	Y. Iwashita, Y. Fuwa, and R. A. Jameson, “RFQ Vane Shapes for Efficient Acceleration”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 581-583. doi:10.18429/JACoW-LINAC2016-TUPLR054
[n]	R. J. Adler, “Emittance Growth in Rippled Solenoidal Magnetic Fields”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1359-1361. 
[n]	B. Wei, “Results from Lanzhou K450 Heavy Ion Cyclotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 29-34. 
[n]	M. Migliorati, E. Belli, G. Castorina, B. Spataro, M. Zobov, and S. Persichelli, “Collective Effects Issues for FCC-ee”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 100-107. doi:10.18429/JACoW-eeFACT2016-TUT3AH1
[n]	M. Yoshii et al., “Status of the J-PARC MA Loaded RF Systems”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA019, pp. 2537-2539. 
[n]	P. Murcek et al., “Evolution of the ELBE SRF gun - improvements towards the 3rd generation”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 331-336. doi:10.18429/JACoW-SRF2025-TUP12
[n]	Z. Zhang, C.-X. Tang, and H. J. Qian, “A Spatially Separated Two Frequency RF Gun Design for Beam Brightness Improvement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2572-2575. doi:10.18429/JACoW-IPAC2016-WEPMY013
[n]	J. Dobson and C. B. Williams, “The Application of Transient Beam Loading in Linear Accelerators to Obtain a Fixed Charge/Pulse”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 279-281. 
[n]	G. A. Krafft et al., “Electron-Beam Diagnostics for Jefferson Lab's High Power Free Electron Laser”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V045, pp. 912-914. 
[n]	B. Mikulec et al., “Linac4 Beam Characterisation before Injection into the CERN PS Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP055, pp. 4893-4895. 
[n]	S. Ma et al., “Simulation and Experiments of Transverse Emittance Measurements with Slit scan and Quadrupole scan at ELBE SRF Gun”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEPP35, unpublished. 
[n]	T. C. Q. Noakes, A. N. Hannah, K. J. Middleman, B. L. Militsyn, R. Valizadeh, and S. Mistry, “The Preparation of Atomically Clean Metal Surfaces for use as Photocathodes in Normally Conducting RF Guns”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 711-713. doi:10.18429/JACoW-IPAC2014-MOPRI047
[n]	V. P. Previtali and S. Peggs, “Conditions on the Grazing Function g for Efficient Collimation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP020, pp. 2826-2828. 
[n]	J. W. Kwan, E. Henestroza, L. E. Ahle, and D. P. Grote, “Design of a Compact High Current Density Injector for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH013, pp. 2105-2107. 
[n]	G. M. Wang, W. X. Cheng, J. Choi, T. V. Shaftan, and X. Yang, “Storage Ring Injection Kickers Alignment Optimization in NSLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4683-4685. doi:10.18429/JACoW-IPAC2017-THPVA095
[n]	C. W. Roberson, “The Racetrack Induction Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3433-3436. 
[n]	N. S. Dikansky and D. Pestrikov, “Nonlinear Coherent Beam-Beam Oscillations in the Rigid Bunch Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1642-1644. 
[n]	M. Colja et al., “New photon BPM setup using SiC devices in photoconductive mode”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 755-759. doi:10.18429/JACoW-IBIC2025-WEPMO17
[n]	Honggong Wu, “Fieldbus Device Drivers for Accelerator Control at DESY”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP041, pp. XX-XX. 
[n]	G. M. Wang et al., “Tools for NSLS II Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1971-1973. doi:10.18429/JACoW-IPAC2015-TUPHA005
[n]	M. B. James and R. H. Miller, “A High Current Injector for the Proposed SLAC Linear Collider”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3461-3464. 
[n]	A. Szwangruber et al., “SIS100 Dipoles From Design to Testing of Series Magnets”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR05, pp. XX-XX. 
[n]	Takashi Emoto, “CO-GENERATION SYSTEM FOR RIBF”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P25, pp. XX-XX. 
[n]	R. Hajima et al., “Development of Superconducting Spoke Cavities for Laser Compton Scattered X-ray Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2902-2904. doi:10.18429/JACoW-IPAC2015-WEPMA056
[n]	M. Tejima et al., “Shot-by-shot Beam Position Monitor System for Beam Transport Line from RCS to MR in J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE011, pp. 978-980. 
[n]	Y. Ivanyushenkov et al., “Development of a Superconducting Helical Undulator for the ILC Positron Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS069, pp. 706-708. 
[n]	A. V. Fedotov et al., “Numerical Studies of the Friction Force for the RHIC Electron Cooler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT092, pp. 4278-4280. 
[n]	Z. Zhao, B. Du, Q. K. Jia, S. Karabekyan, J. Pflueger, and M. Yakopov, “First Field Integral Measurement Campaign for Air Coil”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2991-2993. doi:10.18429/JACoW-IPAC2016-WEPOY001
[n]	M. K. Dey et al., “Beam Injection System Of The Kolkata Superconducting Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 346-348. 
[n]	L. G. Lewis, “Computer Control of High Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 1-9. 
[n]	O. Bourrion, D. Tourres, and C. Vescovi, “LLRF Electronics for the CNAO Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC139, pp. 1392-1394. 
[n]	J. Qiang et al., “Advanced modeling and optimization of nuclear physics colliders”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3194-3197. doi:10.18429/JACoW-IPAC2024-THPC72
[n]	R. Hamm, L. Picardi, and C. Ronsivalle, “Beam Injection Study of the TOP Linac using an AccSys Model PL-7 Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B13, pp. 1675-1677. 
[n]	M. Watanabe et al., “A Broad-Band RF Cavity Using Finemet Cut Cores as a Buncher of Ion Beams”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16026, pp. XX-XX. 
[n]	Y. H. Liu et al., “An 800kV 30mA Line-Frequency Cockcroft-Walton Dc Generator Using Gas Insulated Transformer for Radiation Application”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA022, pp. 3675-3677. 
[n]	D. Van Winkle et al., “The SLAC LINAC LLRF Controls Upgrade”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 654-657. doi:10.18429/JACoW-IBIC2016-WEPG16
[n]	E. Ruiz-Martinez, T. Mary, P. Mutti, J. Ratel, and F. Rey, “Network on Chip Master Control Board for Neutron's Acquisition”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS016, pp. 1006-1009. 
[n]	T. Spangenberg, K. Cerff, and W. Mexner, “Macro package based Enhancement of SPEC controlled Experimental Setups”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL015, pp. 159-161. 
[n]	J. Wolfenden, E. Belli, C. Pakuza, M. Turner, and C. Welsch, “Virtual beam position monitor for particle driven plasma wakefield accelerators”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6023, unpublished. 
[n]	M. A. Webb, G. Belev, C. D. Miller, T. W. Wysokinski, N. Zhu, and M. Gibbons, “Live Animal Imaging Program at Bio-Medical Imaging and Therapy Facility at the Canadian Light Source”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-MEDSI2016-WEPE24
[n]	D. Lipka, “Design of a Cavity Beam Position Monitor for the FLASH 2020+ Undulator Intersection Project at DESY”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 44-47. doi:10.18429/JACoW-IBIC2021-MOPP08
[n]	T. E. Plawski et al., “JLAB LLRF 3.0 Development and Tests”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4340-4342. doi:10.18429/JACoW-IPAC2021-THPAB271
[n]	H. Ikeda et al., “Effect of Coherent Synchrotron Radiation at the SuperKEKB Damping Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ021, pp. 3732-3734. 
[n]	J. Branlard et al., “Installation and First Commissioning of the LLRF System for the European XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3638-3641. doi:10.18429/JACoW-IPAC2017-THOAA3
[n]	C. Ronsivalle et al., “A compact and mobile system for breast irradiation in prone position”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5016-5019. doi:10.18429/JACoW-IPAC2023-THPM056
[n]	W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1155-1158. doi:10.18429/JACoW-IPAC2025-TUPB103
[n]	T. Pacey et al., “Commissioning of the CLARA facility: status update and diagnostics performance”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 97-101. doi:10.18429/JACoW-IBIC2025-MOPCO14
[n]	L. E. Medina Medrano, J. Barranco, T. Pieloni, X. Buffat, and R. Tomas, “Assessment of Linear and Non-Linear Optics Errors due to Beam-Beam with Multipoles for the High Luminosity LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3557-3560. doi:10.18429/JACoW-IPAC2018-THPAK135
[n]	V. Kumar and K.-J. Kim, “Smith-Purcell BWO with Electron Beam Focussing”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH037, pp. 67-70. 
[n]	V. V. Borisov et al., “Magnetic Measurements of NICA Booster Dipoles”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3458-3460. doi:10.18429/JACoW-IPAC2017-WEPVA087
[n]	K. Foraz et al., “Lessons Learned From the First Long Shutdown of the Lhc and Its Injector Chain”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2050-2052. doi:10.18429/JACoW-IPAC2015-TUPTY023
[n]	G. Karady and H. A. Thiessen, “Accelerator Magnet Power Supply Using Storage Generator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1416-1419. 
[n]	A. Buteau, G. Abeille, B. Gagey, and J. C. Fouquet, “Improving SOLEIL Computing Operation with a Service-Oriented Approach”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 441-445. doi:10.18429/JACoW-ICALEPCS2015-MOPGF150
[n]	M. C. Lin and D. N. Smithe, “Study on Low-Frequency Oscillations in a Gyrotron Using a 3D CFDTD PIC Method”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP123, pp. 1713-1715. 
[n]	S. M. Gibson et al., “Overview of Laserwire Beam Profile and Emittance Measurements for High Power Proton Accelerators”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF15, pp. 531-534. 
[n]	D. R. Bett et al., “Ground Motion Compensation using Feed-forward Control at ATF2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2670-2672. doi:10.18429/JACoW-IPAC2016-WEPOR005
[n]	G. Clemente, W. A. Barth, and B. Schlitt, “Conceptual Study for the New HE-Linac at GSI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS032, pp. 2553-2555. 
[n]	D. L. Bruhwiler et al., “High-Order Algorithms for Simulation of Laser Wakefield Accelerators”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP03, pp. 230-230. 
[n]	M. Otevrel et al., “Diagnostics at PITZ 2.0 Beamline: Status and New Developments”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP033, pp. 634-636. 
[n]	E. Cenni et al., “Vertical Test Results on ESS Medium and High Beta Elliptical Cavity Prototypes Equipped with Helium Tank”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 948-950. doi:10.18429/JACoW-IPAC2017-MOPVA041
[n]	P. K. Ambattu et al., “Status of the Crab Cavity Design for the CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC026, pp. 1054-1056. 
[n]	P. N. Juranic et al., “THz Streak Camera for FELTemporal Diagnostics: Concepts and Considerations”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THA01, pp. 640-643. 
[n]	C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX. 
[n]	R. Valizadeh et al., “PVD Depostion of Nb3Sn Thin Film on Copper Substrate from an Alloy Nb3Sn Target”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2818-2821. doi:10.18429/JACoW-IPAC2019-WEPRB011
[n]	Y. Kondo et al., “Development of QWRS for the Future Upgrade of JAEA Tandem Superconducting Booster”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 299. doi:10.18429/JACoW-SRF2021-MOPCAV015
[n]	N. Vinokurov et al., “Commissioning of Novosibirsk Multi-pass Energy Recovery Linac”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THCAU01, pp. 507-510. 
[n]	Y. Gao et al., “Bayesian optimization calibration of ionization profile monitor at the AGS complex”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4444-4447. doi:10.18429/JACoW-IPAC2023-THPL012
[n]	S. H. Kim, Z. A. Conway, W. G. Jansma, M. Kedzie, M. P. Kelly, and P. N. Ostroumov, “4 K Alignment of Superconducting Quarter-Wave Cavities and 9 T Solenoids in the ATLAS Intensity Upgrade Cryomodule”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP003, pp. 443-445. 
[n]	G. Thomas, D. Davids, and O. Holme, “CAN Over Ethernet Gateways: A Convenient and Flexible Solution to Access Low Level Control Devices”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 359-362. doi:10.18429/JACoW-ICALEPCS2015-MOPGF120
[n]	R. Hou et al., “Field Measurements of PEP-II LER Dipoles and Quadrupoles at IHEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P020, pp. 3297-3299. 
[n]	N. Higashi et al., “Low Emittance Lattice for PF-AR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4148-4151. doi:10.18429/JACoW-IPAC2018-THPMF041
[n]	S. V. Tolmachev, A. A. Varfolomeev, and A. Varfolomeev Jr, “STRONG TAPERED UNDULATOR PROVIDING HIGH ENERGY GAIN”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THAP02, pp. XX-XX. 
[n]	H. Muto et al., “Observation of Sublimation Effect of Mg and Ti Ions at the Hyper-Electron Cyclotron Resonance Ion Source”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB29, pp. 262-264. 
[n]	M. A. Green and S. Chouhan, “Cooling-down and Cooling of Superconducting Magnets at 4.5K with Very Little Liquid Helium using Coolers”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3606-3608. doi:10.18429/JACoW-IPAC2017-WEPVA143
[n]	V. G. Ziemann et al., “Recent Results from the Optical Replica Synthesizer Experiment in FLASH”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper WEOB02, pp. 430-432. 
[n]	T. J. Roberts, R. J. Abrams, H. J. Frisch, and V. Ivanov, “Simulations of Picosecond Timing Using Large-Area Photodetectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP079, pp. 3630-3632. 
[n]	M. Walter et al., “Multi-turn Operation of the University of Maryland Electron Ring (UMER)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS047, pp. 1751-1753. 
[n]	M. R. Cleland and R. A. Kiesling, “Dynamag Ion Source with Open Cyclindrical Extractor”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 60-65. 
[n]	T. Korhonen et al., “Modern Technology in Disguise”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOCB05, pp. 1032-1035. 
[n]	Z. H. Yang, Z. H. Bai, W. Li, and L. Wang, “Preliminary Study of Beam Dynamics Compensation for the Elliptically Polarized Undulator at the HLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3114-3116. doi:10.18429/JACoW-IPAC2017-WEPIK080
[n]	G. Kulipanov et al., “Compact Hard X-Ray Synchrotron Radiation Source with Superconducting Bending Magnets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA018, pp. 127-129. 
[n]	Q. Y. Kong, S. LIU, A. Li, H. Liu, and Y. Yang, “Preliminary Design of an RF-focused Interdigital Drift Tube Linac”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3613, unpublished. 
[n]	D. Wu et al., “Differential Evolution Genetic Algorithm for Beam Bunch Temporal Reconstruction”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 392-395. doi:10.18429/JACoW-IBIC2018-WEPA12

For LaTeX

Use Complete Form

For BibTeX

References

Back to search