Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Boi, “Fermilab's Muon Campus: Status, Experiments, and Future”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA105, unpublished.
[n] N. Nakanishi, A. Goto, T. Wada, and Y. Yano, “Beam Dynamics for the IPCR SSC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-17, pp. 435-437.
[n] A. Ballarino, “MgB2 Based High-Current Power Transmission Lines for the HL-LHC Magnets: From Concept to Prototype Validation”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper FRXB03, unpublished.
[n] W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 551-556.
[n] M. Komori et al., “Design of Compact Irradiation Port for Carbon Radiotherapy Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP18002, pp. XX-XX.
[n] Y. F. Nakamura et al., “Performance and Constitution of the Vacuum System in the JAERI AVF Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-29, pp. 276-279.
[n] V. G. Khachatryan, Y. L. Martirosyan, and A. Petrosyan, “Magnets for the CANDLE Booster Synchrotron, Design and Prototyping”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF002, pp. 1588-1590.
[n] P. Costa Pinto et al., “Functionalised a-C coatings to reduce SEY and control surface resistance for the HL-LHC injection kicker beam-pipe ceramic supports”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7102, unpublished.
[n] D. Storey and S. Gessner, “Simulating Beam-Beam Collisions in Linear Colliders Using Particle-in-Cell Methods”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL103, unpublished.
[n] J. Marroncle et al., “Non-invasive Profilers for the Cold Part of ESS Accelerator”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 326-330. doi:10.18429/JACoW-IBIC2023-WEP001
[n] J. M. Bogaty and B. E. Clifft, “A Low-Cost Non-Intercepting Beam Current and Phase Monitor for Heavy Ions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC12, pp. 2625-2627.
[n] F. Cismondi et al., “Planned future upgrades of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 206-208. doi:10.18429/JACoW-LINAC2024-MOPB071
[n] D. C. Plostinar, “MEBT Design for the RAL Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD059, pp. 819-821.
[n] P. Raimondi, “New Developments in Linear Colliders Final Focus Systems.”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MO301, pp. 26-30.
[n] D. Jia, Z. Wang, W. Chen, and Y. He, “First beam commissioning and beam experiments of the CiADS Front end”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB049, unpublished.
[n] J. Gregory, R. Apsimon, A. Dexter, and B. Woolley, “AWAKE Laser Synchronisation and Optical Timing Distribution Network”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6143, unpublished.
[n] J. I. M. Botman, M. K. Craddock, and T. Suzuki, “Magnet Lattices for the Proposed TRIUMF KAON Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1710-1713.
[n] S. Kladov et al., “Commissioning of the low energy electron gun test stand at the University of Chicago”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4544-4546. doi:10.18429/JACoW-IPAC2023-THPL050
[n] D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and W. A. Whittenberg, “SSC Radio-Frequency-Quadrupole Beam: Comparison of Experimental and Simulated Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3130-3133.
[n] D. C. Nguyen, P. M. Anisimov, C. E. Buechler, and Q. R. Marksteiner, “Distributed Seeding for Narrow-band X-ray Free-Electron Lasers”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 301-304. doi:10.18429/JACoW-FEL2015-TUB02
[n] R. Pana and A. Curcio, “Coherent Difraction Radiation for Longitudinal Electron Beam Characteristics”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 291-293. doi:10.18429/JACoW-IBIC2022-TUP28
[n] I. Lobach et al., “Transverse Beam Emittance Measurement by Undulator Radiation Power Noise”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 167-167. doi:10.18429/JACoW-IBIC2021-TUOA03
[n] L. Intelisano, H. Damerau, and I. Karpov, “Longitudinal loss of Landau damping in the CERN super proton synchrotron at 200 GeV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2669-2672. doi:10.18429/JACoW-IPAC2023-WEPA013
[n] J. Wieland, A. Romanov, A. Valishev, and G. Stancari, “Image based reconstruction of the Danilov-Nagaitsev integrable potential”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC19, unpublished.
[n] A. A. Kalamaiko, K. Aulenbacher, M. A. Dehn, S. Friederich, and C. P. Stoll, “High Bunch Charges in the Second Injection Beamline of MESA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2574-2576. doi:10.18429/JACoW-IPAC2022-THPOPT007
[n] T. S. Jiao et al., “The Control System of HIRFL”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 44-46. doi:10.18429/JACoW-ICALEPCS1991-S01SRA11
[n] I. C. Sheng, C. K. Chan, C.-C. Chang, C. Shueh, L. H. Wu, and S. K. Sharma, “The Development of CuCrZr High Heat Load Absorber in TPS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 77-79. doi:10.18429/JACoW-MEDSI2016-MOPE30
[n] A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1734-1735. doi:10.18429/JACoW-ICALEPCS2017-THPHA148
[n] G. Ryckewaert et al., “Status of CYCLONE44: A Postaccelerator for Radioactive Ion Beams”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper M-06, pp. 663-666.
[n] J. McKenzie et al., “Establishing a relativistic ultrafast electron diffraction & imaging (RUEDI) UK national facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2075-2078. doi:10.18429/JACoW-IPAC2023-TUPL144
[n] D. H. Na, B. J. Kim, S. H. Kim, S. B. Lee, and Y. J. Park, “PAL-EUV Vacuum System”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper WEPPP056, unpublished.
[n] G. E. Lee-Whiting, “Analysis of Equivalent Circuits for Linac Tanks”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-3, pp. 471-474.
[n] M. Vujanovic, R. B. Fiorito, A. L. Kippax, C. P. Welsch, and J. Wolfenden, “Optical Phase Space Mapping Using a Digital Micro-Mirror Device”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4439-4441. doi:10.18429/JACoW-IPAC2021-THPAB335
[n] J. Frank et al., “Novel Non-Linear Particle Tracking Approach Employing Lie Algebraic Theory in the TensorFlow Environment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1920-1922. doi:10.18429/JACoW-IPAC2021-TUPAB215
[n] A. A. Derbenev, “Improvement of EPICS Software Deployment at NSLS-II”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 848. doi:10.18429/JACoW-ICALEPCS2019-TUDPP03
[n] L. Torino and U. Iriso, “Charge Distribution Measurements at ALBA”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper THAL3, pp. 925-928.
[n] A. N. Zelenski et al., “A High Quality Polarized Cyclotron Beam for the TRIUMF Parity Violation Experiment”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-14, pp. 642-645.
[n] G. Moreno et al., “RF tuning analysis of a 750 MHz carbon RFQ for medical applications”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 67-70. doi:10.18429/JACoW-LINAC2024-MOPB016
[n] O. Pierret et al., “Comparison of 2 Cathode Geometries for High Current (2 kA) Diodes”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP26, pp. 654-656.
[n] T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2510-2513. doi:10.18429/JACoW-IPAC2023-TUPM122
[n] H. Lippek et al., “A New Timing System for PETRA IV”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3329-3331. doi:10.18429/JACoW-IPAC2021-WEPAB288
[n] V. J. Miller Kamm et al., “Software Tool Leverages Existing Image Analysis Results to Provide In-Situ Transmission of the NIF Disposable Debris Shields”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC083, pp. 1270-1273.
[n] I. Terechkine, S. Cheban, T. H. Nicol, V. Poloubotko, and D. A. Sergatskov, “Feasibility of Using Conductively Cooled Magnets in Cryomodules of Superconducting Linacs”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP090, pp. 361-363.
[n] Y. Yang, Z. Cao, C. Chen, G. Feng, M. Xia, and Z. Zhao, “Design studies of a high-power infrared–terahertz FEL facility”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2638, unpublished.
[n] J. D. Jarvis et al., “Experimental Demonstration of Optical Stochastic Cooling”, presented at the HB'21, Batavia, IL, USA, Oct. 2021, paper TUEC1, unpublished.
[n] J. E. Boers, “A Digital Computer Program for the Simulation of Positive or Negative Particle Beam on a PC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 327-330.
[n] A. Vannozzi et al., “Delivery status of the magnet system for the STAR high energy linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2030-2033. doi:10.18429/JACoW-IPAC2023-TUPL129
[n] M. Lu et al., “Electrochemical Deposition of Nb?Sn on the Surface of Cu Substrates”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 624-627. doi:10.18429/JACoW-SRF2019-TUP076
[n] Y. Funakoshi, “Lessons Learned from the B-Factories and Implications for a High-luminosity Circular e+e- Higgs Factory”, in Proc. HF'14, Beijing, China, Oct. 2014, paper SUT1B1, pp. 239-246.
[n] L. A. Dyks et al., “Consolidation and Future Upgrades to the CLEAR User Facility at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2700-2703. doi:10.18429/JACoW-IPAC2021-WEPAB043
[n] A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL011, unpublished.
[n] B. P. Murin et al., “The New Concepts in Designing the CW High-current Linacs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR07, pp. 1134-1136.
[n] W. Huang et al., “Large Dynamic Range Beam Intensity Measurement of Both H0 and Proton Beams in Injection Upgrade of CSNS-II”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 113-117. doi:10.18429/JACoW-IBIC2025-MOPCO19
[n] C. P. Welsch et al., “CSR - a Cryogenic Storage Ring at MPI-K”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT040, pp. 1237-1239.
[n] W. S. Graves, E. D. Johnson, and P. G. O, “A High Resolution Electron Beam Profile Monitor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7C007, pp. 1993-1995.
[n] A. Bosco et al., “Proposal for a Fast Scanning System Based on Electro-optics for Use at the ILC Laser-wire”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH049, pp. 1118-1120.
[n] I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
[n] P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
[n] L. Xu, H. X. Deng, N. Huang, and Q. M. Zhang, “Arrangement Optimization of Quadrupoles and Correctors for Beam Alignment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2221-2223. doi:10.18429/JACoW-IPAC2021-TUPAB313
[n] P. B. Wilson, Z. D. Farkas, H. A. Hogg, and E. W. Hoyt, “Recent Measurements at SLAC on Superconducting Niobium X-Band Cavities”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 104-108.
[n] D. P. Peterson et al., “CesrTA x-Ray Beam Size Monitor Operation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE090, pp. 1194-1196.
[n] M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
[n] K. Ziegler, E. Martin, and R. Cohen, “Design Studies for an Ultra-thin Septum Extraction Channel for the Modified NEVIS Synchrocyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C07, pp. XX-XX.
[n] A. V. Makulkin, “Stored Beam Lifetime Evaluation Formulae for Electron Stoarge Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3702-3705.
[n] N. A. Towne and G. R. Mitchel, “Characterization of Subnanosecond Heavy-Ion Bunches at the TASCC Superconducting Cyclotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2415-2418.
[n] J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2444-2447.
[n] T. Kroh, N. Matlis, and F. Kaertner, “High-energy single-cycle terahertz sources for compact particle accelerators and manipulators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1440-1442. doi:10.18429/JACoW-IPAC2023-TUPA045
[n] V. D. Shiltsev et al., “Tevatron Beam-beam Compensation Project Progress”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE029, pp. 2083-2085.
[n] E. Pedroni et al., “A Novel Gantry for Proton Therapy at the Paul Scherrer Institute”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper H-3, pp. XX-XX.
[n] N. N. Alexeev et al., “ITEP Complex for Proton and Heavy Ion Acceleration”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1693-1695.
[n] W. Cheng et al., “Beam position monitoring system and beam commissioning at APS-U storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2170-2172. doi:10.18429/JACoW-IPAC2024-WEPG01
[n] S. Yu, E. Henestroza, S. Eylon, and D. Grote, “ILSE-ESQ Injector Scaled Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 709-712.
[n] Shigeshi Ninomiya, Kenichi Muto, Makoto Toda, “DESIGN STUDY OF NON-RESONANT ACCELERATING SYSTEM FOR THE KEK PS BOOSTER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEAM06, pp. XX-XX.
[n] M. F. Blinov, A. R. Frolov, and T. V. Rybitskaya, “Electron linear accelerator of VEPP-5 preinjector”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOEP03, pp. XX-XX.
[n] A. L. He et al., “Optimization of Rapid Magnetic Field Control of the CYCIAE-230 Cyclotron Beamline Magnets”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO019, pp. 106-109. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO019
[n] Y.-J. Chen, J. C. Clark, A. C. Paul, W. E. Nexsen, and W. C. Turner, “Measurement and Simulation of the Whole Beam Brightness on the ETA-II Linear Induction Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU440, pp. 414-416.
[n] J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B010, pp. 461-463.
[n] R. H. A. Farias, N. P. Abreu, L. C. Jahnel, L. Liu, C. Pardine, and P. F. Tavares, “Upgrade and Commissioning of the LNLS RF System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF001, pp. 950-952.
[n] Y.-N. Rao, G. H. Mackenzie, and T. C. Ries, “Redesign of a Low Energy Probe Head”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE008, pp. 1105-1107.
[n] M. Kaemingk et al., “Cavity optimizations and beam dynamics simulations for LANSCE upgrades”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7317, unpublished.
[n] P. N. Clout, M. Geib, and R. Westervelt, “Network Performance for Graphical Control Systems”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 326-328. doi:10.18429/JACoW-ICALEPCS1991-S08NC10
[n] N. van Gils et al., “Preparation for Realisation of External Electron Injection for AWAKE Run 2b”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 549-552. doi:10.18429/JACoW-IPAC2024-MOPR42
[n] R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Nonlinear Dynamics Studies in the Fermilab Tevatron Using an AC Dipole”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH2PBC02, pp. 3073-3075.
[n] C. S. Chen et al., “New Power Supply Control Interface and Energy Ramping in SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P016, pp. 3488-3490.
[n] L. Mether, G. Iadarola, K. L. Poland, G. Rumolo, and G. Skripka, “Multi-Species Electron-Ion Simulations and their Application to the LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3228-3231. doi:10.18429/JACoW-IPAC2019-WEPTS050
[n] I. V. Bogdanov et al., “CROSSOVER RESISTANCE OF SUPERCONDUCTING CABLE FOR FAST-RAMPING MAGNETS OF PARTICLE ACCELERATORS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH01, pp. XX-XX.
[n] M. Rakic et al., “Updated analysis of beam halo measurements in LHC Run 2 and Run 3”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3175-3178. doi:10.18429/JACoW-IPAC2024-THPC67
[n] G. G. Kelley, “Ion Source and Column Performance at ORNL”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-9, pp. 456-464.
[n] , “Zero Gradient Synchrotron (ZGS) High Energy Polarized Proton Beam Program-Injector System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 395-397.
[n] S. A. Kostromin et al., “Compensation of Nonlinearities in NICA Collider Optics”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA001, pp. 35-37.
[n] R. D. Duperrier, “Review of Instability Mechanisms in Ion Linacs”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO1B01, pp. 576-579.
[n] M. Coman, D. Dancila, I. Profatilova, and M. Jacewicz, “Exploring high gradient limit with cryogenic experiments at FREIA laboratory”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1618-1621. doi:10.18429/JACoW-IPAC2024-TUPR86
[n] E. J. Schneider and D. A. Swenson, “Field Perturbations in the Post Coupled Drift Tube Linac”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-5, pp. 499-511.
[n] M. W. Guetg and P. Emma, “Tune-Up Simulations for LCLS-II”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 507-510. doi:10.18429/JACoW-FEL2017-WEP043
[n] R. P. Fliller, H. Edwards, and W. Hartung, “Time Dependent Quantum Efficiency and Dark Current Measurements in an RF Photocathode Injector with a High Quantum Efficiency Cathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP041, pp. 2681-2683.
[n] A. Matheisen, “Status of the RF Superconductivity Activities at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL007, pp. XX-XX.
[n] A. H. Lumpkin et al., “Results of Prototype Particle-Beam Diagnostics Tests for the Advanced Photon Source (APS)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2112-2115.
[n] B. P. Xiao et al., “Operational Experience and Redesign of the Tuner without Spring Fingers for the LEReC Warm Cavity”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1116-1118. doi:10.18429/JACoW-IPAC2021-MOPAB359
[n] K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 560-563.
[n] E. Naselli et al., “The First Measurement of Plasma Density by Means of an Interfero-Polarimetric Setup in a Compact ECR-Plasma Trap”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 102-106. doi:10.18429/JACoW-ECRIS2018-TUP11
[n] G. Danby et al., “Window Frame or Superferric" Magnet Design for Low B (
[n] F. Grespan et al., “High Power RF Conditioning of the ESS DTL1”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 356-359. doi:10.18429/JACoW-LINAC2022-TUPOJO09
[n] L. Perrot et al., “Detailed design studies of the high energy beam transport line of the Minerva Project at SCK CEN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 69-72. doi:10.18429/JACoW-IPAC2023-MOPA011
[n] E. Cicek et al., “An advanced digital feedback control system design for the muon linear accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4194-4197. doi:10.18429/JACoW-IPAC2023-THPA100
[n] M. Okamura, A. Cannav??, S. Ikeda, T. Kanesue, and S. A. Kondrashev, “Slanted Beam Extraction on Laser Ion Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2090-2092. doi:10.18429/JACoW-IPAC2022-WEPOTK020
For LaTeX
Use Complete Form
For BibTeX
References
- S. Boi, “Fermilab's Muon Campus: Status, Experiments, and Future”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA105, unpublished.
- N. Nakanishi, A. Goto, T. Wada, and Y. Yano, “Beam Dynamics for the IPCR SSC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-17, pp. 435-437.
- A. Ballarino, “MgB2 Based High-Current Power Transmission Lines for the HL-LHC Magnets: From Concept to Prototype Validation”, presented at the 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, paper FRXB03, unpublished.
- W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 551-556.
- M. Komori et al., “Design of Compact Irradiation Port for Carbon Radiotherapy Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP18002, pp. XX-XX.
- Y. F. Nakamura et al., “Performance and Constitution of the Vacuum System in the JAERI AVF Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-29, pp. 276-279.
- V. G. Khachatryan, Y. L. Martirosyan, and A. Petrosyan, “Magnets for the CANDLE Booster Synchrotron, Design and Prototyping”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF002, pp. 1588-1590.
- P. Costa Pinto et al., “Functionalised a-C coatings to reduce SEY and control surface resistance for the HL-LHC injection kicker beam-pipe ceramic supports”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7102, this conference.
- D. Storey and S. Gessner, “Simulating Beam-Beam Collisions in Linear Colliders Using Particle-in-Cell Methods”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL103, unpublished.
- J. Marroncle et al., “Non-invasive Profilers for the Cold Part of ESS Accelerator”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP001, pp. 326-330.
- J. M. Bogaty and B. E. Clifft, “A Low-Cost Non-Intercepting Beam Current and Phase Monitor for Heavy Ions”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC12, pp. 2625-2627.
- F. Cismondi et al., “Planned future upgrades of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 206-208.
- D. C. Plostinar, “MEBT Design for the RAL Front End Test Stand”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD059, pp. 819-821.
- P. Raimondi, “New Developments in Linear Colliders Final Focus Systems.”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MO301, pp. 26-30.
- D. Jia, Z. Wang, W. Chen, and Y. He, “First beam commissioning and beam experiments of the CiADS Front end”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB049, unpublished.
- J. Gregory, R. Apsimon, A. Dexter, and B. Woolley, “AWAKE Laser Synchronisation and Optical Timing Distribution Network”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6143, this conference.
- J. I. M. Botman, M. K. Craddock, and T. Suzuki, “Magnet Lattices for the Proposed TRIUMF KAON Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1710-1713.
- S. Kladov et al., “Commissioning of the low energy electron gun test stand at the University of Chicago”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL050, pp. 4544-4546.
- D. Raparia, F. W. Guy, J. W. Hurd, K. Saadatmand, and W. A. Whittenberg, “SSC Radio-Frequency-Quadrupole Beam: Comparison of Experimental and Simulated Results”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3130-3133.
- D. C. Nguyen, P. M. Anisimov, C. E. Buechler, and Q. R. Marksteiner, “Distributed Seeding for Narrow-band X-ray Free-Electron Lasers”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 301-304.
- R. Pana and A. Curcio, “Coherent Difraction Radiation for Longitudinal Electron Beam Characteristics”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 291-293.
- I. Lobach et al., “Transverse Beam Emittance Measurement by Undulator Radiation Power Noise”, in Proc. 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, pp. 167-167.
- L. Intelisano, H. Damerau, and I. Karpov, “Longitudinal loss of Landau damping in the CERN super proton synchrotron at 200 GeV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA013, pp. 2669-2672.
- J. Wieland, A. Romanov, A. Valishev, and G. Stancari, “Image based reconstruction of the Danilov-Nagaitsev integrable potential”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC19, unpublished.
- A. A. Kalamaiko, K. Aulenbacher, M. A. Dehn, S. Friederich, and C. P. Stoll, “High Bunch Charges in the Second Injection Beamline of MESA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2574-2576.
- T. S. Jiao et al., “The Control System of HIRFL”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S01SRA11, pp. 44-46.
- I. C. Sheng, C. K. Chan, C.-C. Chang, C. Shueh, L. H. Wu, and S. K. Sharma, “The Development of CuCrZr High Heat Load Absorber in TPS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 77-79.
- A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1734-1735.
- G. Ryckewaert et al., “Status of CYCLONE44: A Postaccelerator for Radioactive Ion Beams”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper M-06, pp. 663-666.
- J. McKenzie et al., “Establishing a relativistic ultrafast electron diffraction & imaging (RUEDI) UK national facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL144, pp. 2075-2078.
- D. H. Na, B. J. Kim, S. H. Kim, S. B. Lee, and Y. J. Park, “PAL-EUV Vacuum System”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper WEPPP056, unpublished.
- G. E. Lee-Whiting, “Analysis of Equivalent Circuits for Linac Tanks”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-3, pp. 471-474.
- M. Vujanovic, R. B. Fiorito, A. L. Kippax, C. P. Welsch, and J. Wolfenden, “Optical Phase Space Mapping Using a Digital Micro-Mirror Device”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4439-4441.
- J. Frank et al., “Novel Non-Linear Particle Tracking Approach Employing Lie Algebraic Theory in the TensorFlow Environment”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1920-1922.
- A. A. Derbenev, “Improvement of EPICS Software Deployment at NSLS-II”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 848.
- L. Torino and U. Iriso, “Charge Distribution Measurements at ALBA”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper THAL3, pp. 925-928.
- A. N. Zelenski et al., “A High Quality Polarized Cyclotron Beam for the TRIUMF Parity Violation Experiment”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-14, pp. 642-645.
- G. Moreno et al., “RF tuning analysis of a 750 MHz carbon RFQ for medical applications”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 67-70.
- O. Pierret et al., “Comparison of 2 Cathode Geometries for High Current (2 kA) Diodes”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP26, pp. 654-656.
- T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM122, pp. 2510-2513.
- H. Lippek et al., “A New Timing System for PETRA IV”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3329-3331.
- V. J. Miller Kamm et al., “Software Tool Leverages Existing Image Analysis Results to Provide In-Situ Transmission of the NIF Disposable Debris Shields”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC083, pp. 1270-1273.
- I. Terechkine, S. Cheban, T. H. Nicol, V. Poloubotko, and D. A. Sergatskov, “Feasibility of Using Conductively Cooled Magnets in Cryomodules of Superconducting Linacs”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP090, pp. 361-363.
- Y. Yang, Z. Cao, C. Chen, G. Feng, M. Xia, and Z. Zhao, “Design studies of a high-power infrared–terahertz FEL facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2638, this conference.
- J. D. Jarvis et al., “Experimental Demonstration of Optical Stochastic Cooling”, presented at the 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper TUEC1, unpublished.
- J. E. Boers, “A Digital Computer Program for the Simulation of Positive or Negative Particle Beam on a PC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 327-330.
- A. Vannozzi et al., “Delivery status of the magnet system for the STAR high energy linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL129, pp. 2030-2033.
- M. Lu et al., “Electrochemical Deposition of Nb?Sn on the Surface of Cu Substrates”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 624-627.
- Y. Funakoshi, “Lessons Learned from the B-Factories and Implications for a High-luminosity Circular e+e- Higgs Factory”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper SUT1B1, pp. 239-246.
- L. A. Dyks et al., “Consolidation and Future Upgrades to the CLEAR User Facility at CERN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2700-2703.
- A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL011, unpublished.
- B. P. Murin et al., “The New Concepts in Designing the CW High-current Linacs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR07, pp. 1134-1136.
- W. Huang et al., “Large Dynamic Range Beam Intensity Measurement of Both H0 and Proton Beams in Injection Upgrade of CSNS-II”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 113-117.
- C. P. Welsch et al., “CSR - a Cryogenic Storage Ring at MPI-K”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT040, pp. 1237-1239.
- W. S. Graves, E. D. Johnson, and P. G. O, “A High Resolution Electron Beam Profile Monitor”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7C007, pp. 1993-1995.
- A. Bosco et al., “Proposal for a Fast Scanning System Based on Electro-optics for Use at the ILC Laser-wire”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH049, pp. 1118-1120.
- I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
- P.-E. Bernaudin et al., “Design of the Low-beta, Quarter-wave Resonator and its Cryomodule for the SPIRAL 2 Project”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT054, pp. 1276-1278.
- L. Xu, H. X. Deng, N. Huang, and Q. M. Zhang, “Arrangement Optimization of Quadrupoles and Correctors for Beam Alignment”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2221-2223.
- P. B. Wilson, Z. D. Farkas, H. A. Hogg, and E. W. Hoyt, “Recent Measurements at SLAC on Superconducting Niobium X-Band Cavities”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 104-108.
- D. P. Peterson et al., “CesrTA x-Ray Beam Size Monitor Operation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE090, pp. 1194-1196.
- M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
- K. Ziegler, E. Martin, and R. Cohen, “Design Studies for an Ultra-thin Septum Extraction Channel for the Modified NEVIS Synchrocyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C07, pp. XX-XX.
- A. V. Makulkin, “Stored Beam Lifetime Evaluation Formulae for Electron Stoarge Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3702-3705.
- N. A. Towne and G. R. Mitchel, “Characterization of Subnanosecond Heavy-Ion Bunches at the TASCC Superconducting Cyclotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2415-2418.
- J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2444-2447.
- T. Kroh, N. Matlis, and F. Kaertner, “High-energy single-cycle terahertz sources for compact particle accelerators and manipulators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA045, pp. 1440-1442.
- V. D. Shiltsev et al., “Tevatron Beam-beam Compensation Project Progress”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE029, pp. 2083-2085.
- E. Pedroni et al., “A Novel Gantry for Proton Therapy at the Paul Scherrer Institute”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper H-3, pp. XX-XX.
- N. N. Alexeev et al., “ITEP Complex for Proton and Heavy Ion Acceleration”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1693-1695.
- W. Cheng et al., “Beam position monitoring system and beam commissioning at APS-U storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG01, pp. 2170-2172.
- S. Yu, E. Henestroza, S. Eylon, and D. Grote, “ILSE-ESQ Injector Scaled Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 709-712.
- Shigeshi Ninomiya, Kenichi Muto, Makoto Toda, “DESIGN STUDY OF NON-RESONANT ACCELERATING SYSTEM FOR THE KEK PS BOOSTER”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEAM06, pp. XX-XX.
- M. F. Blinov, A. R. Frolov, and T. V. Rybitskaya, “Electron linear accelerator of VEPP-5 preinjector”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOEP03, pp. XX-XX.
- A. L. He et al., “Optimization of Rapid Magnetic Field Control of the CYCIAE-230 Cyclotron Beamline Magnets”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO019, pp. 106-109.
- Y.-J. Chen, J. C. Clark, A. C. Paul, W. E. Nexsen, and W. C. Turner, “Measurement and Simulation of the Whole Beam Brightness on the ETA-II Linear Induction Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU440, pp. 414-416.
- J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5B010, pp. 461-463.
- R. H. A. Farias, N. P. Abreu, L. C. Jahnel, L. Liu, C. Pardine, and P. F. Tavares, “Upgrade and Commissioning of the LNLS RF System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF001, pp. 950-952.
- Y.-N. Rao, G. H. Mackenzie, and T. C. Ries, “Redesign of a Low Energy Probe Head”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE008, pp. 1105-1107.
- M. Kaemingk et al., “Cavity optimizations and beam dynamics simulations for LANSCE upgrades”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP7317, this conference.
- P. N. Clout, M. Geib, and R. Westervelt, “Network Performance for Graphical Control Systems”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC10, pp. 326-328.
- N. van Gils et al., “Preparation for Realisation of External Electron Injection for AWAKE Run 2b”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR42, pp. 549-552.
- R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Nonlinear Dynamics Studies in the Fermilab Tevatron Using an AC Dipole”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH2PBC02, pp. 3073-3075.
- C. S. Chen et al., “New Power Supply Control Interface and Energy Ramping in SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P016, pp. 3488-3490.
- L. Mether, G. Iadarola, K. L. Poland, G. Rumolo, and G. Skripka, “Multi-Species Electron-Ion Simulations and their Application to the LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3228-3231.
- I. V. Bogdanov et al., “CROSSOVER RESISTANCE OF SUPERCONDUCTING CABLE FOR FAST-RAMPING MAGNETS OF PARTICLE ACCELERATORS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUDPH01, pp. XX-XX.
- M. Rakic et al., “Updated analysis of beam halo measurements in LHC Run 2 and Run 3”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC67, pp. 3175-3178.
- G. G. Kelley, “Ion Source and Column Performance at ORNL”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART4-9, pp. 456-464.
- , “Zero Gradient Synchrotron (ZGS) High Energy Polarized Proton Beam Program-Injector System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 395-397.
- S. A. Kostromin et al., “Compensation of Nonlinearities in NICA Collider Optics”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA001, pp. 35-37.
- R. D. Duperrier, “Review of Instability Mechanisms in Ion Linacs”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO1B01, pp. 576-579.
- M. Coman, D. Dancila, I. Profatilova, and M. Jacewicz, “Exploring high gradient limit with cryogenic experiments at FREIA laboratory”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR86, pp. 1618-1621.
- E. J. Schneider and D. A. Swenson, “Field Perturbations in the Post Coupled Drift Tube Linac”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper F-5, pp. 499-511.
- M. W. Guetg and P. Emma, “Tune-Up Simulations for LCLS-II”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 507-510.
- R. P. Fliller, H. Edwards, and W. Hartung, “Time Dependent Quantum Efficiency and Dark Current Measurements in an RF Photocathode Injector with a High Quantum Efficiency Cathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP041, pp. 2681-2683.
- A. Matheisen, “Status of the RF Superconductivity Activities at DESY”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper TL007, pp. XX-XX.
- A. H. Lumpkin et al., “Results of Prototype Particle-Beam Diagnostics Tests for the Advanced Photon Source (APS)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2112-2115.
- B. P. Xiao et al., “Operational Experience and Redesign of the Tuner without Spring Fingers for the LEReC Warm Cavity”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1116-1118.
- K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 560-563.
- E. Naselli et al., “The First Measurement of Plasma Density by Means of an Interfero-Polarimetric Setup in a Compact ECR-Plasma Trap”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 102-106.
- G. Danby et al., “Window Frame or Superferric" Magnet Design for Low B (
- F. Grespan et al., “High Power RF Conditioning of the ESS DTL1”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 356-359.
- L. Perrot et al., “Detailed design studies of the high energy beam transport line of the Minerva Project at SCK CEN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA011, pp. 69-72.
- E. Cicek et al., “An advanced digital feedback control system design for the muon linear accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA100, pp. 4194-4197.
- M. Okamura, A. Cannav??, S. Ikeda, T. Kanesue, and S. A. Kondrashev, “Slanted Beam Extraction on Laser Ion Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2090-2092.
Back to search