JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. P. Stoll and F. Hug, “Beam Breakup Limit Estimations and Higher Order Mode Characterisation for MESA”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 134-137. doi:10.18429/JACoW-ERL2019-THCOWBS06
[n]	C.-C. Kuo et al., “Commissioning of the Taiwan Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1314-1318. doi:10.18429/JACoW-IPAC2015-TUXC3
[n]	Z. K. Liang, W. Chen, X. Liu, J. Zha, K. F. Liu, and B. Qin, “Design of the Energy Selection System for Proton Therapy Based on GEANT4”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 30-32. doi:10.18429/JACoW-Cyclotrons2016-MOD01
[n]	C. Xu, M. J. Kelley, C. E. Reece, and H. Tian, “Characterization of Scale-Dependent Roughness of Niobium Surfaces as a Function of Surface Treatment Processes”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO046, pp. 832-834. 
[n]	J. M. Vogt, J. Knobloch, and O. Kugeler, “Studies of Systematic Flux Expulsion in Superconducting Niobium”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO004, pp. 2316-2318. 
[n]	G. LeBlanc, M. J. Boland, and Y. E. Tan, “The Australian Synchrotron Project Storage Ring and Injection System Overview”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF005, pp. 2263-2265. 
[n]	A. S. Setty, “Tuning Method for the 2/3 Traveling Wave Structures”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP278, pp. 1349-1351. 
[n]	B. Efken et al., “A Combination of a Van de Graaff Accelerator and a Splitpole Cyclotron for Heavy Ions”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 63-69. 
[n]	I. Akimov et al., “Application of HTS Bi-2223 for Current Leads of Superconducting Magnets”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B14, pp. 2178-2180. 
[n]	R. Helm, L. Keller, T. O. Raubenheimer, and P. Tenenbaum, “Studies of Beam Optics and Scattering in the Next Linear Collider Post-Linac Collimation System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUOCF102, pp. 268-270. 
[n]	C. P. Bailey et al., “First Results from the ISIS RFQ Test Stand”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A05, pp. 833-835. 
[n]	J. S. Kolski, “Proposed Varying Amplitude Raster Pattern to Uniformly Cover Target for the Isotope Production Facility (IPF) at LANSCE”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB46, pp. 148-150. 
[n]	D. Bulfone, R. De Monte, V. Forchi, G. Gaio, M. Lonza, and L. Pivetta, “New Front-End Computers Based on Linux-RTAI and PPC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE616, pp. XX-XX. 
[n]	K. T. McDonald, J. S. Berg, H. G. Kirk, D. Stratakis, and X. P. Ding, “Carbon and Mercury Target Systems for Muon Colliders and Neutrino Factories”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1641-1643. doi:10.18429/JACoW-IPAC2016-TUPMY044
[n]	U. Bechstedt et al., “The Stochastic Cooling System and its Application to Internal Experiments at the Cooler Synchrotron COSY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13F, pp. 553-555. 
[n]	J. Dey, I. Kourbanis, and D. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ13, pp. 3312-3314. 
[n]	G. Guignard and J. Hagel, “Analytical Treatment of Single Bunch Stability in a Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4040, pp. 484-486. 
[n]	M. Hoffmann, F. Ludwig, H. Schlarb, and S. Simrock, “Multichannel Downconverter for the Next Generation RF Field Control for VUV- and X-Ray Free Electron Lasers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN011, pp. 2071-2073. 
[n]	G. M. Wang et al., “Study of Beam Emittance and Energy Spread Measurements Using SVD and Multiple Flags in the NSLS-II Booster Extraction Beamline”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA084, pp. 2677-2679. 
[n]	J. P. Edelen, S. Biedron, J. R. Harris, S. V. Milton, and J. W. Lewellen, “A Two Frequency Gun for High Current Thermionic Cathode Electron Injector Systems”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM09, pp. 649-651. 
[n]	P. Cameron et al., “PLL Tune Measurement during RHIC 2001”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI072, pp. 1855-1857. 
[n]	K. Arakawa et al., “Status Report on JAERI-AVF Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-06, pp. 57-60. 
[n]	N. R. A. Valles, D. S. Klein, and M. Liepe, “Beam Break Up Studies for Cornell's Energy Recovery Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO056, pp. 229-231. 
[n]	A. Kuhl et al., “Analysis of the Electro-optical Front End for the New 40 GHz Bunch Arrival Time Monitor System”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper WECC04, pp. 571-575. 
[n]	V. A. Lebedev and M. S. Zolotorev, “Test of Optical Stochastic Cooling in Fermilab”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1B02, pp. 514-516. 
[n]	J. J. Yang et al., “Space Charge Simulation on High Intensity Cyclotrons: Code Development and Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU3PBC05, pp. 730-732. 
[n]	D. Wang et al., “Very Short Bunches in MIT-Bates South Hall Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE068, pp. 3768-3770. 
[n]	A. Luccio, “Measurement of the Spin of a Particle Using Undulator Radiation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2175-2178. 
[n]	J. Struckmeier, “Calculation of Intra-beam Scattering Effects via Extended RMS Moment Equations”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1183-1186. 
[n]	J. Rogers, “Beam Dynamics in High Luminosity e+e- Factories”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAB001, pp. 336-340. 
[n]	J. R. Faulkner, “Recent Developments in High Power Vacuum Tube Technology”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-2, pp. 336-339. 
[n]	F. Herbrand, “Use of Search Methods at Optical Elements of Linear Accelerator Systems for Ions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A14, pp. 1835-1837. 
[n]	E. B. Anderson and J. Rogers, “Trapped Modes in CESR Sliding Joints”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W004, pp. 369-371. 
[n]	Y.-C. Liu, H.-P. Chang, K.-K. Lin, Y. K. Lin, and G.-H. Luo, “Commissioning of 360 mA Top-up Operation at TLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC043, pp. 2082-2084. 
[n]	C. P. Welsch, “Development of Beyond State-of-the-art Diagnostic Techniques within the European Network DITANET”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper THVTS02, pp. 363-367. 
[n]	H. Harada, K. Yamamoto, and S. Kato, “Ionization Profile Monitor (IPM) of J-PARC 3-GeV RCS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME021, pp. 515-517. 
[n]	G. Bienvenu and P. Brunet, “Dark Current under Low and High Electric Field”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 775-778. 
[n]	A. Mikhailichenko, “Excitation of the Grating by Moving Focus of the Laser Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 802-805. 
[n]	D. Reistad et al., “Recent Activities at CELSIUS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP108G, pp. 590-592. 
[n]	A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX. 
[n]	D. J. Clark, “A Conceptual Design for a Primary Cyclotron for the ISL Radioactive Beam Project”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIII-02, pp. 721-724. 
[n]	C. E. Hill, “Experiments on a 14.5 GHz ECR source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP18, pp. 366-368. 
[n]	G. Neil, “Applications for Energy Recovering Free Electron Lasers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZBC03, pp. 132-136. 
[n]	C. R. Kim, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Design of the Beam Dump for Low Flux Beamline in KOMAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3702-3704. doi:10.18429/JACoW-IPAC2016-THPMY022
[n]	N. Edamenko, D. Ovsyannikov, A. Zhabko, and V. L. Kabanov, “Beam Parameters Optimization in the Initial Part of Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU421, pp. 361-361. 
[n]	H. Tsutsui, S. Matsumoto, S. Michizono, Y. H. Chin, and S. Fukuda, “X-Band Klystron Output Cavity Simulation”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4036, pp. 851-853. 
[n]	M. Bender, W. A. Assmann, and H. Kollmus, “Understanding of Ion Induced Desorption Using the ERDA Technique”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH173, pp. 1423-1425. 
[n]	G. Bassi, A. Blednykh, S. Krinsky, and J. Rose, “Self-Consistent Simulations of Passive Landau Cavity Effects”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA03, pp. 177-179. 
[n]	P. J. Horne, “Implementation of an INTEL 8080 Microprocessor Development System Using Existing Minicomputers”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1772-1774. 
[n]	Y. Luo, Y. Hao, J. Qiang, Y. Roblin, F. J. Willeke, and H. Zhang, “Simulation Challenges for eRHIC Beam-Beam Study”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 785-787. doi:10.18429/JACoW-IPAC2019-MOPRB090
[n]	T. Honma et al., “Present Status of HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A02, pp. 2557-2559. 
[n]	S. W. Mosko, W. H. White, and R. E. Worsham, “Performance of the ORIC Variable RF System”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F08, pp. XX-XX. 
[n]	A. Chavan, A. DiChiara, P. D. Hartog, B. Hu, and K. J. Suthar, “Characterization of the Acoustic Field Generated by the Single-Axis Acoustic Levitator”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 226-229. doi:10.18429/JACoW-MEDSI2016-TUPE28
[n]	D. P. May et al., “Progress On The Facility Upgrade For Accelerated Radioactive Beams At Texas A&M”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 505-510. 
[n]	J. Faure, J. L. Lemaire, and R. Vienet, “The 3 Preinjectors of MIMAS for Heavy Ions Polarized and Unpolariezed Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1072-1075. 
[n]	N. Nishimori, “Review of Experimental Results from High Brightness DC Guns: Highlights in FEL Applications”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 269-273. doi:10.18429/JACoW-FEL2015-MOD01
[n]	S. C. Lee, C. Bungau, and R. Cywinski, “Geant4 Simulations of Proton-induced Spallation for Applications in ADSR Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1943-1945. doi:10.18429/JACoW-IPAC2016-TUPOY019
[n]	V. N. Litvinenko, S. F. Mikhailov, O. A. Shevchenko, and Y. Wu, “Project for Generation of Femtosecond X-ray Beams from the Duke Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH071, pp. 2614-2616. 
[n]	L. A. Ahrens and S. Y. Zhang, “Booster Gold Beam Injection Efficiency and Beam Loss”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP40C, pp. 2149-2154. 
[n]	M. Hara, T. Nakamura, T. Ohshima, and T. Takashima, “Coherent Synchrotron Oscillation Excited by a Ripple of a Klystron Power Supply”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23H, pp. 1280-1282. 
[n]	M. Portillo, V. N. Aseev, J. A. Nolen, Jr., and P. N. Ostroumov, “Design of a Magnetic Optical System for Transport and Matching of Multiple-Charge-State Heavy-Ion Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH072, pp. 3012-3014. 
[n]	A. Romanenko and L. V. Goncharova, “Investigation of Near-Surface Interstitial Hydrogen in Cavity-Grade Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO052, pp. 849-853. 
[n]	J. A. Crittenden, M. A. Palmer, and J. T. Urban, “Design Considerations and Modeling Results for ILC Damping Ring Wigglers Based on the CESR-c Superconducting Wiggler”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS011, pp. 3014-3016. 
[n]	S. H. Shin, Y. Honda, E.-S. Kim, H.-S. Kim, and J. Urakawa, “The Design Study of IP-BPM for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN054, pp. 4120-4122. 
[n]	K. Tsumaki, M. Hara, R. Nagaoka, H. Tanaka, and K. Yoshida, “Lattice Comparison for the 8 GeV Synchrotron Radiation Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1358-1361. 
[n]	H. Koziol Geneva, “Beam Diagnostics, Old and New”, in Proc. DIPAC'99, Chester, UK, May 1999, paper IT11, pp. XX-XX. 
[n]	F. Meot, M. Bai, V. Ptitsyn, and V. H. Ranjbar, “Spin Code Benchmarking at RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP103, pp. 2318-2320. 
[n]	G. Bisoffi et al., “Completion of the First Superconducting RFQ at INFN-LNL”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP001, pp. 367-371. 
[n]	D. Peterson and J. Marriner, “A Frequency Tracking Synthesizer for Beam Diagnostic Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1228-1231. 
[n]	R. Averill, K. Hatch, C. Sibley, and R. Gross, “Power Factor Correction at MIT-Bates Linear Accelerator Center with Pulsed Loads of up to 180 MW Peak (2.7 MW Average)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P058, pp. 3743-3745. 
[n]	V. Rapp and V. Cucek, “Concept and First Evaluation of the Archiving System for FAIR”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 486-489. doi:10.18429/JACoW-ICALEPCS2017-TUPHA043
[n]	N. Thompson et al., “FEL Research and Development at STFC Daresbury Laboratory”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD44, pp. 468-471. 
[n]	S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335. 
[n]	K. Kondo, R. Dabrowski, T. Kanesue, and M. Okamura, “Angular Distribution of Laser Ablation Plasma”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC054, pp. 4179-4181. 
[n]	M. F. Stroosnijder, “The Application of a Cyclotron in Materials Research at the IAM of the European Commission”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper D-02, pp. 144-147. 
[n]	D. C. Carey, “Third Order Combined Function Bending Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1289-1292. 
[n]	Y. E. Tan, D. J. Peake, and D. O. Tavares, “Fast Orbit Feedback with Linux PREEMPT_RT”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 630-633. doi:10.18429/JACoW-IBIC2016-WEPG08
[n]	L. S. Stoel et al., “High Energy Booster Options for a Future Circular Collider at CERN”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 856-859. doi:10.18429/JACoW-IPAC2016-MOPOY007
[n]	H. L. To, G. Andonian, R. K. Li, and P. Musumeci, “Surface Plasmon Resonance Enhanced Multiphoton Emission from Metallic Cathode”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC37, pp. 1220-1222. 
[n]	D. Wollmann, R. Schmidt, J. A. Uythoven, J. Wenninger, and M. Zerlauth, “Commissioning of the Machine Protection Systems of the Large Hadron Collider Following its First Long Shutdown”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4203-4206. doi:10.18429/JACoW-IPAC2016-THPOY045
[n]	B. X. Yang, S. H. Lee, J. W. Morgan, and H. Shang, “High-Energy X-Ray Pinhole Camera for High-Resolution Electron Beam Size Measurements”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 504-507. doi:10.18429/JACoW-IBIC2016-TUPG66
[n]	L. Coney, “The Status of the MICE Tracker System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP051, pp. 4069-4071. 
[n]	R. E. Meller and D. Hartill, “Pulsed NMR Magnetometers for CESR”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE008, pp. 2339-2341. 
[n]	R. Connolly et al., “Laser Profile Measurements of an H- Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH034, pp. 1300-1302. 
[n]	S. Fukuoka, K. Fan, K. Ishii, H. Matsumoto, and T. Sugimoto, “Development of a Fast Compensation Kicker System for J-PARC Main-ring Injection”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA009, pp. 684-686. 
[n]	W. P. Lysenko, V. W. Hughes, S. Ohnuma, P. A. Thompson, and H. F. Vogel, “Beam Calculations for LAMPF Muon Channel”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1593-1598. 
[n]	P. Ursch??tz, H.-H. Braun, R. Corsini, S. Doebert, A. Ferrari, and F. Tecker, “Beam Dynamic Studies and Emittance Optimization in the CTF3 Linac at CERN”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS102, pp. 798-800. 
[n]	G. C. Pappas, G. D'Auria, P. Delgiusto, and L. Veljak, “Power Modulators for FERMI Linac's Klystrons.”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS045, pp. 2448-2450. 
[n]	R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138. 
[n]	D. Rifuggiato, “TEN YEARS OF OPERATION WITH THE LNS SUPERCONDUCTING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20A5, pp. XX-XX. 
[n]	J. Herrera, R. Hogue, A. Prodell, P. Wanderer, and E. Willen, “Random Errors in the Magnetic Field Coefficients of Superconducting Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3689-3692. 
[n]	W. H. Strong, P. A. Gurd, J. D. Creel, and B. Bevins, “The SNS Cryogenic Control System: Experiences in Collaboration”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP013, pp. XX-XX. 
[n]	K. S. B. Li et al., “Code Development for Collective Effects”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 362-367. doi:10.18429/JACoW-HB2016-WEAM3X01
[n]	H. Podlech, A. Bechtold, M. Busch, H. Klein, H. Liebermann, and U. Ratzinger, “Development of the Superconducting CH-Cavity and Applications to Proton and Ion Acceleration”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO403, pp. XX-XX. 
[n]	B. Barish, “GDE Expectations from SRF Community”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper FRA09, pp. 642-642. 
[n]	H. Shiraishi, A. Hasegawa, N. Kishimoto, J. Nagakawa, and N. Yamamoto, “Invited Paper: An Application of Cyclotron to Radiation Damage Study for Fusion Reactor Material Development”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper J-03, pp. 571-578. 
[n]	J. Zhou, C. Chen, S. Eylon, E. Henestroza, B. L. Qian, and S. S. Yu, “Beam Halo Formation and Loss Induced by Image-Charge Effects in a Small-Aperture Alternating-Gradient Focusing System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG025, pp. 2646-2648. 
[n]	J. J. Bicek, P. J. Billquist, and J. L. Yntema, “Telemetry Component Tests in the FN Tandem Terminal”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1182-1184. 
[n]	S. E. Alden, S. M. Gibson, and L. J. Nevay, “A Simulation Framework for Photon-Particle Interactions for Laserwires and Further Applications”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4045-4048. doi:10.18429/JACoW-IPAC2019-THPRB095
[n]	J. Q. Zhang et al., “Axial Injection Beam Line of a Compact Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP100, pp. 254-255. 
[n]	E. Celebi, O. Cakir, G. Turemen, and G. Unel, “Recent Developments in DEMIRCI for RFQ Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3243-3245. doi:10.18429/JACoW-IPAC2018-THPAK018
[n]	Q. Demazeux, C. Szwaj, E. Roussel, B. Steffen, M. K. Czwalinna, and S. Bielawski, “Single-shot detection of short electron bunch shapes at MHz repetition rates using diversity electro-optic scheme with advanced reconstruction algorithms at EuXFEL and FLASH”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 746-749. doi:10.18429/JACoW-IBIC2025-WEPMO13
[n]	P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA001, pp. XX-XX. 
[n]	A. Ganshin et al., “Temperature Waves in SRF Research”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP104, pp. 719-723. 
[n]	C. Mitsuda et al., “Suppression of Stored Beam Oscillation at Injection by Fast Kicker in the SPring-8 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 280-282. doi:10.18429/JACoW-IPAC2014-MOPRO082
[n]	G. Berden, W. A. Gillespie, S. P. Jamison, A. MacLeod, B. Redlich, and A. F. G. van der Meer, “Real-Time, Single-Shot Temporal Measurements of Short Electron Bunches, Terahertz CSR and FEL Radiation”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM017, pp. XX-XX. 
[n]	T. Inagaki et al., “Construction of 8-GeV C-band Accelerator for XFEL/SPring-8”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOC3, pp. 525-528. 
[n]	W. Bartmann et al., “Beam Transfer to the FCC-hh Collider from a 3.3 TeV Booster in the LHC Tunnel”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3901-3904. doi:10.18429/JACoW-IPAC2015-THPF089
[n]	S. D. Putnam, “Survey of Compact High Current Electron Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 887-892. 
[n]	K. A. Trukhanov, V. V. Poliektov, and V. I. Shvedunov, “THEORETICAL AND EXPERIMENTAL STUDY OF BEAM ENERGY SPREAD DIAGNOSTICS WITH VAVILOV ÔÇô CHERENKOV RADIATION AT OPTICAL AND RF WAVELENGTH”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHO04, pp. XX-XX. 
[n]	S. T. Artikova, M. Grieser, and J. Ullrich, “Investigation of Intrabeam Scattering in the Heavy Ion Storage Ring TSR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS005, pp. 2490-2492. 
[n]	E. Meintanis and E. Stiliaris, “Estimation of Transversal Emittance using an Artificial Neural Network”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B17, pp. 1812-1814. 
[n]	R. Maier, D. Prasuhn, W. Schwab, H. J. Stein, and J. Witt, “Operational Characteristics of the COSY Electron Cooler”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1200-1203. 
[n]	R. Shane, S. M. Lidia, Z. Liu, S. Nash, A. C. C. Villari, and O. Yair, “Bunch Shape Measurements at the National Superconducting Cyclotron Laboratory ReAccelerator (ReA3)”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 771-773. doi:10.18429/JACoW-IBIC2016-WEPG54
[n]	M. Borland, “Android Application for Accelerator Physics and Engineering Calculations”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA06, pp. 1364-1366. 
[n]	P. Kneisel, J. Mammosser, and J. F. Benesch, “Analysis of Mechanical Fabrication Experience with CEBAF's Production SRF Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 947-950. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search