Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Hess and C. S. Park, “Advanced Electromagnetic Analysis for Electron Source Geometries”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP044, pp. 2815-2817.
[n] S. Benson and M. Shinn, “Development of an Accelerator-Ready Photocathode Drive Laser at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC24, pp. 1052-1054.
[n] A. Rohrmayer, J. R. Stapay, and A. G. Vanderflught, “The Effect of Distorted Voltages in Experimental Areas and Suggested Improvements”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 780-782.
[n] J. Boedewadt, E. Hass, and J. Rossbach, “Commissioning Results of the Photon-Electron Diagnostic Unit at sFLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD54, pp. 173-175.
[n] Smolej M., Jeram B., Kenda K., Kriznar I., Lesjak B., Perko M., Platise U., Plesko M., “Accelerator Control with the LonWorks Fieldbus”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P38, pp. XX-XX.
[n] Y. Papaphilippou and A. M. Lombardi, “Sorting Strategies for the Arc Quadrupoles of the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH045, pp. 2017-2019.
[n] H. Leboutet, “The Maryland University Sectored Isochronous Cyclotron - MUSIC”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 881-887.
[n] V. Sajaev and L. Emery, “Determination and Correction of the Linear Lattice of the APS Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI001, pp. 742-744.
[n] J. J. Beebe-Wang, J. D. Galambos, J. A. Holmes, Y. Y. Lee, A. Luccio, and D. K. Olsen, “Status of the SNS Injection System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP49C, pp. 341-343.
[n] H.-P. Chang, P. J. Chou, C.-C. Kuo, G.-H. Luo, H.-J. Tsai, and M.-H. Wang, “Nonlinear Beam Dynamics of TPS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS063, pp. 3430-3432.
[n] S. Bassanese, M. Ferianis, F. Iazzourene, and V. A. Verzilov, “Linac and Transfer Line Beam Position Monitor at ELETTRA”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW005, pp. XX-XX.
[n] P. Zhang, H. X. Hao, Z. Q. Li, and X. Y. Zhang, “Frequency Pre-tuning of the 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 459-462. doi:10.18429/JACoW-SRF2017-TUPB035
[n] V. P. Ovchinnikov, V. I. Alexandrov, E. M. Kolchin, V. P. Maznev, and M. P. Svinin, “Experience on Operating High-Voltage Accelerators Designed in NIIEFA on Industrial Facilities Intended for Polymer Materials' Modification”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB036, pp. 251-253.
[n] I. Lobach, S. Nagaitsev, A. L. Romanov, A. V. Shemyakin, and G. Stancari, “Experiments with Undulator Radiation, Emitted by a Single Electron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1628-1631. doi:10.18429/JACoW-IPAC2022-WEOYSP1
[n] J. K. Hawkins, R. B. Howard, and H. V. Nguyen, “Automated Real-Time Testing For Embedded Control Systems”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP037, pp. XX-XX.
[n] W. Thongpakdi and S. Rimjaem, “Development of Injector System for MIR/THz Free-Electron Laser Facility in Thailand”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2767-2769. doi:10.18429/JACoW-IPAC2017-WEPAB084
[n] H. Henke, “Transverse Damping in a 30 GHZ Very High Energy Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1346-1349.
[n] Y.-C. Liu, J. C. Huang, and F. H. Tseng, “Beam-Based Alignment Procedures for Small Gap in-Vacuum Undulators at the Taiwan Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4342-4344. doi:10.18429/JACoW-IPAC2018-THPMK020
[n] R. P. Wells et al., “NGLS Linac Design”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP068, pp. 286-290.
[n] M. D. Nahemow, “Modeling a Heavy Ion Driver for an ICF Power Plant”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3160-3163.
[n] R. M. Sundelin, “Joints, Couplers, and Tuners”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-12, pp. XX-XX.
[n] H. Burkhardt, A.-S. Muller, and J. Wenninger, “Energy Loss Measurements at LEP2”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP27, pp. 3011-3013.
[n] M. A. Pop, F. Curbis, and S. Werin, “On the Coherence Properties of FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2753-2755. doi:10.18429/JACoW-IPAC2017-WEPAB074
[n] S. A. Kozynchenko, “Development of the Object-oriented Program in C ++ for Simulation of Beam Dynamics in Accelerator Injection Systems”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB024, pp. 364-366.
[n] D. W. Storm, D. T. Corcoran, M. A. Howe, Q.-X. Lin, and D. P. Rosenzweig, “Status Report on the University of Washington Superconducting Booster Accelerator Project”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D01, pp. XX-XX.
[n] S. R. Tiwari, M. Borage, and K. Swarna, “Analysis and Design of Parallel Resonant Network Power Supply for a Rapid Cycling Synchrotron”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA045, pp. 685-687.
[n] V. Palmieri, “Seamless Superconducting RF Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCR2, pp. 541-544.
[n] S. V. Benson, “Cavity Length Change vs. Mirror Steering in a Ring Confocal Resonator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP069, pp. 516-520.
[n] S. Tazzari, “ARES: The INFN Project”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91B01, pp. XX-XX.
[n] S. W. Williams, R. F. DePaula, D. R. Keffeler, and G. R. Rodenz, “Voltage Breakdown in a 420 MHz RFQ Structure”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2976-2979.
[n] H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1410-1413.
[n] M. Kumada and K. Nakajima, “Laser FEL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP112, pp. 2510-2512.
[n] R. B. Yoder and Z. Kabilova, “Micro-Scale Electron Beam Generation Using Pyroelectric Crystals”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 538-541. doi:10.18429/JACoW-IPAC2017-MOPIK018
[n] R. W. Hamm and R. A. Kenefick, “Properties of the Texas A&M Electron Beam Ion Source”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1637-1640.
[n] M. Liepe, W.-D. M?Âller, and S. N. Simrock, “Dynamic Lorentz Force Compensation with a Fast Piezoelectric Tuner”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA011, pp. XX-XX.
[n] J. Miertusova, F. Mazzolini, F. Pradal, and L. Rumiz, “Performance of Insertion Device Vacuum Chambers at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO026, pp. 2577-2579.
[n] H. Guckel, “Micromechanics via Synchrotron Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPE02, pp. 63-66.
[n] M. Nazari, F. Abbasi, F. Ghasemi, and M. Jafarzadeh, “Design and Simulation of a Thermionic Electron Gun for a 1 MeV Parallel Feed Cockcroft-Walton Industrial Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1976-1978. doi:10.18429/JACoW-IPAC2016-TUPOY032
[n] P. Bricault, M. Dombsky, A. Dowling, and P. Schmor, “High Power Targets for ISOL Radioactive Ion Beam Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD003, pp. 439-443.
[n] Yu. G. Matveev, V. Korchuganov, and D. A. Shvedov, “Ferrite Line to Decrease Rise Time of High Voltage Nanosecond Pulses”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH302, pp. 4047-4049.
[n] F. Giacuzzo and J. Miertusova, “Pumping and Pressure Measuring System for the Linac of the ELETTRA Synchrotron Light Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP081L, pp. 2524-2526.
[n] M. Gullans, G. Penn, J. S. Wurtele, and A. Zholents, “A Source of Coherent Soft X-ray Radiation Based on High-order Harmonic Generation and Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH045, pp. 142-144.
[n] T. Ieiri, H. Fukuma, Y. Ohnishi, and M. Tobiyama, “Measurement of Wake Effects by Means of Tune Shift in the KEKB Low-Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH078, pp. 2101-2103.
[n] X. Rao et al., “FRIB accelerator improvement projects to mitigate beam losses in post-stripper linac”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4301, unpublished.
[n] A. A. Hassan, C. L. Fink, and G. Rosing, “A Beam Characterization of H- Particles”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1504-1507.
[n] A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2503-2506.
[n] D. C. Weisser, M. Malev, and J. S. Sokolowski, “The Stub to Plate Weld in Quarter Wave Resonators - An Investigation”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-10, pp. XX-XX.
[n] S. Redaelli, X. Buffat, M. Lamont, G. J. M?â, R. J. Steinhagen, and J. Wenninger, “Commissioning of Ramp and Squeeze at the LHC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD54, pp. 202-206.
[n] R. C. McCrady, “A Tapered-foil Emittance-exchange Experiment at LANSCE”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC049, pp. 1278-1280.
[n] I. E. Campisi and Z. D. Farkas, “The Pulsed RF Superconductivity Program at SLAC”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-7, pp. XX-XX.
[n] G. W. Bennett, E. Beadle, V. Castillo, and R. L. Witkover, “The Upgraded Ring Loss Radiation Monitoring System at the AGS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1477-1480.
[n] B. Pirenne, “Data Acquisition from heterogeneous sensor networks: the case of NEPTUNE Canada, the world largest cabled ocean observatory.”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRCOAA05, pp. 214-218.
[n] J. Patrick, “Evolution of the Fermilab Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU602, pp. XX-XX.
[n] A. D. Palczewski, D. Gonnella, O. S. Melnychuk, and D. A. Sergatskov, “Study of Flux Trapping Variability between Batches of Tokyo Denkai Niobium used for the LCLS-II Project and Subsequent 9-cell RF Loss Distribution between the Batches”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 570-575. doi:10.18429/JACoW-SRF2019-TUP057
[n] H. Fadil, M. Grieser, A. Wolf, and R. von Hahn, “Finite Elements Calculations of the Lattice and Ring Acceptance of the Heidelberg CSR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH018, pp. 1960-1962.
[n] Ph. Bernard et al., “Superconducting Niobium Sputter-Coated Copper Cavities at 1500 MHz”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E12, pp. XX-XX.
[n] D. A. Swenson, F. W. Guy, J. W. Lenz, K. R. Crandall, and J. M. Potter, “Status of the RFD Linac Prototype”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W027, pp. 1099-1101.
[n] K. W. Shepard, “Development of Superconducting Resonators for the Argonne Heavy-Ion Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3248-3251.
[n] A. V. Smirnov and E. A. Savin, “Fundamental Properties of a Novel, Metal-Dielectric, Tubular Structure with Magnetic RF Compensation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 582-584. doi:10.18429/JACoW-NAPAC2016-TUPOB40
[n] C. R. Rose, J. D. Gilpatrick, and M. W. Stettler, “The LEDA Beam-Position Measurement System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P077, pp. 2093-2095.
[n] W. Barth, L. Dahl, J. Glatz, L. Groening, S. G. Richter, and S. Yaramishev, “Achievements of the High Current Beam Performance of the GSI Unilac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT017, pp. 1171-1173.
[n] G. Guignard, “Beam Optics Requirements and Possible Parameters for Operating LEP”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1364-1367.
[n] N. Marquardt, “DELTA, a Low-Emittance Storage Ring as Free-Electron-Laser Radiation Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 780-783.
[n] J. Russell, “Preliminary Results of RMS Emittance Measurements Performed on the Sub-Picosecond Accelerator Using Beam Position Monitors”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P056, pp. 2177-2179.
[n] C. S. Mishra and F. A. Harfoush, “Correction Schemes to Improve the Dynamical Aperture of the Main Injector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 348-351.
[n] A. A. Hahn and J. R. Zagel, “Observation of Bethe-Bloch Ionization using the Booster Ion Profile Monitor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAR4, pp. 468-470.
[n] J. Sherman, et al., “Development of a 0.025-A, 12% DF H- Source for Lansce”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT160, pp. 1500-1502.
[n] K. Takayama and K. Hirosawa, “Longitudinal momentum halos – Risk of the fractional velocity particles in high-current hadron linacs”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4623, unpublished.
[n] V. S. Morozov et al., “Analysis of Spin Response Function at Beam Interaction Point in JLEIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 400-403. doi:10.18429/JACoW-IPAC2018-MOPML007
[n] S. Boychenko, M. A. Galil?â, J. C. Garnier, M. Zerlauth, and M. Zenha-Rela, “Multi-Criteria Partitioning on Distributed File Systems for Efficient Accelerator Data Analysis and Performance Optimization”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1436-1441. doi:10.18429/JACoW-ICALEPCS2017-THPHA036
[n] M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Status and Development for the JAERI ERL-FEL for High-Power and Long-Pulse Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF053, pp. 1723-1725.
[n] Nakamura T.T., Akiyama A., Katoh T., Kubo Ta., Yamamoto N., Yoshida M., “Magnet Power Supply Control System in KEKB Accelerators”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P40, pp. XX-XX.
[n] G. Franchetti, I. Hofmann, V. V. Kapin, and S. Sorge, “High Intensity Nonlinear Dynamics in SIS100”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP023, pp. 3242-3244.
[n] C. H. Kuo et al., “The Alarm and Downtime Analysis Development in the TLS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 439-441. doi:10.18429/JACoW-ICALEPCS2017-TUPHA031
[n] W. Zhang, R. Sanders, W. Fisher, and L. Hoff, “RHIC Injection Kicker Power Supply System Control, Integration and Commission”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA80, pp. 1261-1263.
[n] Y. Yano, A. Goto, M. Kase, and T. Katayama, “RIKEN RI Beam Factory Project: Progress Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA007, pp. 575-579.
[n] A. Hutton and M. S. Zisman, “An Asymmetric B Factory Based on PEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 389-392.
[n] R. A. Rimmer et al., “An RF Cavity for the NLC Damping Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH064, pp. 924-926.
[n] S. Y. Lee and J. Wei, “Effect of the Induced Voltage on the Bunch Motion at the Transition Energy”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1169-1172.
[n] Z. Li, L. Ge, C.-K. Ng, and L. Xiao, “Recent Developments and Applications of Parallel Multi-Physics Accelerator Modeling Suite ACE3P”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 888-891. doi:10.18429/JACoW-NAPAC2019-WEPLE04
[n] Y. L. Li, “3D Laser Pulse Shaping, Measurement, and 3D Eletron Beam Profile Measurement for Photinjectors”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOCI1, pp. 519-523.
[n] J. Campmany, J. Marcos, and V. Massana, “New Undulator and Front End for XAIRA Beamline at ALBA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4231-4233. doi:10.18429/JACoW-IPAC2019-THPTS056
[n] T. Mitsuhashi, “Design and Constriction of Coronagraph for Observation of Beam Halo”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT070, pp. 2655-2657.
[n] Y. Xu et al., “Using CT algorithm to reconstruct electron beams transverse phase space in HUST-UED”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2319-2322. doi:10.18429/JACoW-IPAC2024-WEPG44
[n] P. Leban and G. Decker, “Initial Tests of New Electron and Photon Beam Position Monitor Electronics at the Advanced Photon Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD19, pp. 344-346.
[n] M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3263-3266.
[n] V. Volkov et al., “Beam Dynamics in RF-Gun Cavity with a Modified First Cell”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3W022, pp. 2796-2798.
[n] H. Takeda, “Semi-Analytical Calculation of Accelerating Beam in a Photo-Injector Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU425, pp. 369-371.
[n] A. L. Mints, K. F. Gertsev, and B. M. Gutner, “Electronic System of the 70-Ge V Proton Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 516-519.
[n] B. Hillenbrand, “The Preparation of Superconducting Nb3Sn Surfaces for RF Applications”, in Proc. SRF'80, Karlsruhe, Germany, Jul. 1980, paper SRF80-3, pp. XX-XX.
[n] A. V. Watkins, M. Jensen, M. Maddock, S. A. Pande, S. Rains, and D. Spink, “RF Distribution System of the Diamond Master Oscillator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH168, pp. 3188-3190.
[n] X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Robust 6D Muon Cooling in Four-sided Ring Cooler using Solenoids and Dipoles for a Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP055, pp. 205-207.
[n] C. W. Potts, “An Instrument for Measuring Betatron Resonant Frequencies”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 382-387.
[n] M. Fulop, S. Ft?íccaron, and P. Ragan, “Cyklotron for Medical and Physical Uses in Slovak Republic”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper K-04, pp. 706-709.
[n] I. Skudnova, “Beam Dynamics Optimization in Drift Tube Linear Accelerator With Permanent Quadrupole Magnets”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 234-236. doi:10.18429/JACoW-IPAC2019-MOPGW063
[n] B. Podobedov and G. V. Stupakov, “New Method for Point-Charge Wakefield Calculation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEODB1, pp. 778-780.
[n] D. K. Kalantaryan and Y. L. Martirosyan, “Transfer Matrices for the Coupled Space Charge Dominated Six-dimensional Particle Motion”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT003, pp. 1135-1137.
[n] E. Pace and G. Di Pirro, “Using Memcached as Real-time Database in the SPARC Control System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCB03, pp. 112-114.
[n] A. Barty, “Ultrafast Single-Shot Diffraction Imaging of Nanoscale Dynamics”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROBI1, pp. 715-715.
[n] T. Weilbach, K. Aulenbacher, and J. Dietrich, “Optical Electron Beam Diagnostics for Relativistic Electron Cooling Devices”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD48, pp. 158-160.
[n] M. Zobov, “Crab Waist Approach: from DAFNE to SuperB”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHX03, pp. 6-10.
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1148-1151.
[n] I. Igor et al., “VIL410, CPI's 1.3 GHz, 25 kW CW IOT Amplifier System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2305-2307. doi:10.18429/JACoW-IPAC2014-WEPME023
[n] F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 823-827.
[n] J. L. Warren, G. P. Boicourt, M. T. Menzel, G. W. Rodenz, and M. C. Vasquez, “Revision of and Documentation for the Standard Version of the POISSON Group Codes”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2870-2873.
[n] J.-L. Fernandez-Hernando, “Activation and Residual Equivalent Dose Rate Studies for an ILC Betatron Spoiler Prototype”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP036, pp. 2869-2871.
[n] JP. de Brion, R. Dei-Cas, and H. Leboutet, “A Magnetic Compressor for a 5 MeV Electron Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 961-964.
[n] H. O. Funsten and R. T. Siegel, “Meson Channel Design for the SREL Synchrocyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 508-510.
[n] D. Gorelov, J.-W. Kim, F. Marti, H. Podlech, X. Wu, and R. C. York, “Superconducting Driver Linac Beam Dynamics Optimization for RIA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH317, pp. 4086-4088.
[n] M. Emamian, M. S. Hutson, and G. Swift, “Optical Beam Line Design for the Duke Free Electron Laser Laboratory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH036, pp. 2524-2526.
[n] W. E. Gabella, R. D. Ruth, and R. L. Warnock, “Refinement of the Hamilton-Jacobi Solution Using a Second Canonical Transformation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1591-1594.
[n] J. Welch and Z. Xu, “Low Loss Parameter for New CESR Electrostatic Separators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1851-1854.
[n] W. Joho, “The S.I.N. Ring Cyclotron after One Year of Operation”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1397-1402.
[n] K.-H. Park et al., “The Design of Low Noise Magnet Power Supply”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 136-138. doi:10.18429/JACoW-FEL2015-MOP048
[n] A. Kanareykin et al., “New Developments on Low-loss Ferroelectrics for Accelerator Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH195, pp. 3251-3253.
[n] G.-H. Luo, C. K. Kuan, T. H. Lee, and D.-J. Wang, “Beam Parameters Measurement by a Pinhole Detector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI095, pp. 1930-1932.
[n] Y. Hao, Y. Luo, V. Ptitsyn, and J. Qiang, “Scaling Properties of the Synchro-Beta Resonance in Crab Crossing Scheme of Future Electron Ion Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 766-768. doi:10.18429/JACoW-IPAC2019-MOPRB082
[n] V. V. Danilov and Z. Liu, “Studies of the Effect of 2nd Harmonic on the e-p Instability and RF Control of Instabilities”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C06, pp. 373-376.
[n] S. A. Nikitin, “Adiabatic Theory of Slow Extraction of Particles from a Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH086, pp. 2119-2121.
[n] M. Seidel and F. Willeke, “Layout of the Upgraded HERA Interaction Regions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B15, pp. 379-381.
[n] T. Miura, Y. Irie, Y. Sato, and H. Someya, “Beam Position Measurement Using Linac Microstructure at the KEK Booster Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB044, pp. 2509-2511.
[n] E. Barzi et al., “Nb3Al Prototype Conductor for the Transmission Line Magnet”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP155, pp. 3330-3332.
[n] J. E. Clendenin, T. Maruyama, G. A. Mulhollan, Yu. A. Mamaev, A. V. Subashiev, and Yu. P. Yashin, “Superlattice Photocathodes for Accelerator-Based Polarized Electron Source Applications”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA44, pp. 1988-1990.
[n] J. Alessi, A. Kponou, R. Raymond, and Th. Sluyters, “Status of the AGS Polarized Negative Ion Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2708-2710.
[n] A. P. Zhukov and S. Assadi, “SNS BLM System Overview: Detectors, Measurements, Simulations”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGF04, pp. 453-453.
[n] J. Takahashi et al., “Plunger Frequency Control of a Side Coupled Accelerating Structure for the IFUSP Microtron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P038, pp. 2998-3000.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Hess and C. S. Park, “Advanced Electromagnetic Analysis for Electron Source Geometries”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAP044, pp. 2815-2817.
- S. Benson and M. Shinn, “Development of an Accelerator-Ready Photocathode Drive Laser at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC24, pp. 1052-1054.
- A. Rohrmayer, J. R. Stapay, and A. G. Vanderflught, “The Effect of Distorted Voltages in Experimental Areas and Suggested Improvements”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 780-782.
- J. Boedewadt, E. Hass, and J. Rossbach, “Commissioning Results of the Photon-Electron Diagnostic Unit at sFLASH”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD54, pp. 173-175.
- Smolej M., Jeram B., Kenda K., Kriznar I., Lesjak B., Perko M., Platise U., Plesko M., “Accelerator Control with the LonWorks Fieldbus”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P38, pp. XX-XX.
- Y. Papaphilippou and A. M. Lombardi, “Sorting Strategies for the Arc Quadrupoles of the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH045, pp. 2017-2019.
- H. Leboutet, “The Maryland University Sectored Isochronous Cyclotron - MUSIC”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 881-887.
- V. Sajaev and L. Emery, “Determination and Correction of the Linear Lattice of the APS Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI001, pp. 742-744.
- J. J. Beebe-Wang, J. D. Galambos, J. A. Holmes, Y. Y. Lee, A. Luccio, and D. K. Olsen, “Status of the SNS Injection System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP49C, pp. 341-343.
- H.-P. Chang, P. J. Chou, C.-C. Kuo, G.-H. Luo, H.-J. Tsai, and M.-H. Wang, “Nonlinear Beam Dynamics of TPS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS063, pp. 3430-3432.
- S. Bassanese, M. Ferianis, F. Iazzourene, and V. A. Verzilov, “Linac and Transfer Line Beam Position Monitor at ELETTRA”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW005, pp. XX-XX.
- P. Zhang, H. X. Hao, Z. Q. Li, and X. Y. Zhang, “Frequency Pre-tuning of the 166.6 MHz Proof-of-principle SRF Cavity for HEPS-TF”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 459-462.
- V. P. Ovchinnikov, V. I. Alexandrov, E. M. Kolchin, V. P. Maznev, and M. P. Svinin, “Experience on Operating High-Voltage Accelerators Designed in NIIEFA on Industrial Facilities Intended for Polymer Materials' Modification”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB036, pp. 251-253.
- I. Lobach, S. Nagaitsev, A. L. Romanov, A. V. Shemyakin, and G. Stancari, “Experiments with Undulator Radiation, Emitted by a Single Electron”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1628-1631.
- J. K. Hawkins, R. B. Howard, and H. V. Nguyen, “Automated Real-Time Testing For Embedded Control Systems”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP037, pp. XX-XX.
- W. Thongpakdi and S. Rimjaem, “Development of Injector System for MIR/THz Free-Electron Laser Facility in Thailand”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2767-2769.
- H. Henke, “Transverse Damping in a 30 GHZ Very High Energy Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1346-1349.
- Y.-C. Liu, J. C. Huang, and F. H. Tseng, “Beam-Based Alignment Procedures for Small Gap in-Vacuum Undulators at the Taiwan Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4342-4344.
- R. P. Wells et al., “NGLS Linac Design”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP068, pp. 286-290.
- M. D. Nahemow, “Modeling a Heavy Ion Driver for an ICF Power Plant”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3160-3163.
- R. M. Sundelin, “Joints, Couplers, and Tuners”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-12, pp. XX-XX.
- H. Burkhardt, A.-S. Muller, and J. Wenninger, “Energy Loss Measurements at LEP2”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP27, pp. 3011-3013.
- M. A. Pop, F. Curbis, and S. Werin, “On the Coherence Properties of FEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2753-2755.
- S. A. Kozynchenko, “Development of the Object-oriented Program in C ++ for Simulation of Beam Dynamics in Accelerator Injection Systems”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB024, pp. 364-366.
- D. W. Storm, D. T. Corcoran, M. A. Howe, Q.-X. Lin, and D. P. Rosenzweig, “Status Report on the University of Washington Superconducting Booster Accelerator Project”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87D01, pp. XX-XX.
- S. R. Tiwari, M. Borage, and K. Swarna, “Analysis and Design of Parallel Resonant Network Power Supply for a Rapid Cycling Synchrotron”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA045, pp. 685-687.
- V. Palmieri, “Seamless Superconducting RF Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THCR2, pp. 541-544.
- S. V. Benson, “Cavity Length Change vs. Mirror Steering in a Ring Confocal Resonator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP069, pp. 516-520.
- S. Tazzari, “ARES: The INFN Project”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91B01, pp. XX-XX.
- S. W. Williams, R. F. DePaula, D. R. Keffeler, and G. R. Rodenz, “Voltage Breakdown in a 420 MHz RFQ Structure”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2976-2979.
- H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1410-1413.
- M. Kumada and K. Nakajima, “Laser FEL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP112, pp. 2510-2512.
- R. B. Yoder and Z. Kabilova, “Micro-Scale Electron Beam Generation Using Pyroelectric Crystals”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 538-541.
- R. W. Hamm and R. A. Kenefick, “Properties of the Texas A&M Electron Beam Ion Source”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1637-1640.
- M. Liepe, W.-D. M?Âller, and S. N. Simrock, “Dynamic Lorentz Force Compensation with a Fast Piezoelectric Tuner”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper SA011, pp. XX-XX.
- J. Miertusova, F. Mazzolini, F. Pradal, and L. Rumiz, “Performance of Insertion Device Vacuum Chambers at ELETTRA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO026, pp. 2577-2579.
- H. Guckel, “Micromechanics via Synchrotron Radiation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPE02, pp. 63-66.
- M. Nazari, F. Abbasi, F. Ghasemi, and M. Jafarzadeh, “Design and Simulation of a Thermionic Electron Gun for a 1 MeV Parallel Feed Cockcroft-Walton Industrial Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1976-1978.
- P. Bricault, M. Dombsky, A. Dowling, and P. Schmor, “High Power Targets for ISOL Radioactive Ion Beam Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAD003, pp. 439-443.
- Yu. G. Matveev, V. Korchuganov, and D. A. Shvedov, “Ferrite Line to Decrease Rise Time of High Voltage Nanosecond Pulses”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH302, pp. 4047-4049.
- F. Giacuzzo and J. Miertusova, “Pumping and Pressure Measuring System for the Linac of the ELETTRA Synchrotron Light Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP081L, pp. 2524-2526.
- M. Gullans, G. Penn, J. S. Wurtele, and A. Zholents, “A Source of Coherent Soft X-ray Radiation Based on High-order Harmonic Generation and Free Electron Lasers”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH045, pp. 142-144.
- T. Ieiri, H. Fukuma, Y. Ohnishi, and M. Tobiyama, “Measurement of Wake Effects by Means of Tune Shift in the KEKB Low-Energy Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH078, pp. 2101-2103.
- X. Rao et al., “FRIB accelerator improvement projects to mitigate beam losses in post-stripper linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4301, this conference.
- A. A. Hassan, C. L. Fink, and G. Rosing, “A Beam Characterization of H- Particles”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1504-1507.
- A. F. Grant and B. D. Fell, “An Effective Cooling Arrangement for an Infrared Mirror Subject to High Heat Loads at the SRS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2503-2506.
- D. C. Weisser, M. Malev, and J. S. Sokolowski, “The Stub to Plate Weld in Quarter Wave Resonators - An Investigation”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-10, pp. XX-XX.
- S. Redaelli, X. Buffat, M. Lamont, G. J. M?â, R. J. Steinhagen, and J. Wenninger, “Commissioning of Ramp and Squeeze at the LHC”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD54, pp. 202-206.
- R. C. McCrady, “A Tapered-foil Emittance-exchange Experiment at LANSCE”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC049, pp. 1278-1280.
- I. E. Campisi and Z. D. Farkas, “The Pulsed RF Superconductivity Program at SLAC”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-7, pp. XX-XX.
- G. W. Bennett, E. Beadle, V. Castillo, and R. L. Witkover, “The Upgraded Ring Loss Radiation Monitoring System at the AGS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1477-1480.
- B. Pirenne, “Data Acquisition from heterogeneous sensor networks: the case of NEPTUNE Canada, the world largest cabled ocean observatory.”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRCOAA05, pp. 214-218.
- J. Patrick, “Evolution of the Fermilab Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU602, pp. XX-XX.
- A. D. Palczewski, D. Gonnella, O. S. Melnychuk, and D. A. Sergatskov, “Study of Flux Trapping Variability between Batches of Tokyo Denkai Niobium used for the LCLS-II Project and Subsequent 9-cell RF Loss Distribution between the Batches”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 570-575.
- H. Fadil, M. Grieser, A. Wolf, and R. von Hahn, “Finite Elements Calculations of the Lattice and Ring Acceptance of the Heidelberg CSR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH018, pp. 1960-1962.
- Ph. Bernard et al., “Superconducting Niobium Sputter-Coated Copper Cavities at 1500 MHz”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E12, pp. XX-XX.
- D. A. Swenson, F. W. Guy, J. W. Lenz, K. R. Crandall, and J. M. Potter, “Status of the RFD Linac Prototype”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W027, pp. 1099-1101.
- K. W. Shepard, “Development of Superconducting Resonators for the Argonne Heavy-Ion Linac”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3248-3251.
- A. V. Smirnov and E. A. Savin, “Fundamental Properties of a Novel, Metal-Dielectric, Tubular Structure with Magnetic RF Compensation”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 582-584.
- C. R. Rose, J. D. Gilpatrick, and M. W. Stettler, “The LEDA Beam-Position Measurement System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P077, pp. 2093-2095.
- W. Barth, L. Dahl, J. Glatz, L. Groening, S. G. Richter, and S. Yaramishev, “Achievements of the High Current Beam Performance of the GSI Unilac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT017, pp. 1171-1173.
- G. Guignard, “Beam Optics Requirements and Possible Parameters for Operating LEP”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1364-1367.
- N. Marquardt, “DELTA, a Low-Emittance Storage Ring as Free-Electron-Laser Radiation Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 780-783.
- J. Russell, “Preliminary Results of RMS Emittance Measurements Performed on the Sub-Picosecond Accelerator Using Beam Position Monitors”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P056, pp. 2177-2179.
- C. S. Mishra and F. A. Harfoush, “Correction Schemes to Improve the Dynamical Aperture of the Main Injector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 348-351.
- A. A. Hahn and J. R. Zagel, “Observation of Bethe-Bloch Ionization using the Booster Ion Profile Monitor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THAR4, pp. 468-470.
- J. Sherman, et al., “Development of a 0.025-A, 12% DF H- Source for Lansce”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT160, pp. 1500-1502.
- K. Takayama and K. Hirosawa, “Longitudinal momentum halos – Risk of the fractional velocity particles in high-current hadron linacs”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4623, this conference.
- V. S. Morozov et al., “Analysis of Spin Response Function at Beam Interaction Point in JLEIC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 400-403.
- S. Boychenko, M. A. Galil?â, J. C. Garnier, M. Zerlauth, and M. Zenha-Rela, “Multi-Criteria Partitioning on Distributed File Systems for Efficient Accelerator Data Analysis and Performance Optimization”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1436-1441.
- M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Status and Development for the JAERI ERL-FEL for High-Power and Long-Pulse Operation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF053, pp. 1723-1725.
- Nakamura T.T., Akiyama A., Katoh T., Kubo Ta., Yamamoto N., Yoshida M., “Magnet Power Supply Control System in KEKB Accelerators”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P40, pp. XX-XX.
- G. Franchetti, I. Hofmann, V. V. Kapin, and S. Sorge, “High Intensity Nonlinear Dynamics in SIS100”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP023, pp. 3242-3244.
- C. H. Kuo et al., “The Alarm and Downtime Analysis Development in the TLS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 439-441.
- W. Zhang, R. Sanders, W. Fisher, and L. Hoff, “RHIC Injection Kicker Power Supply System Control, Integration and Commission”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA80, pp. 1261-1263.
- Y. Yano, A. Goto, M. Kase, and T. Katayama, “RIKEN RI Beam Factory Project: Progress Report”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA007, pp. 575-579.
- A. Hutton and M. S. Zisman, “An Asymmetric B Factory Based on PEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 389-392.
- R. A. Rimmer et al., “An RF Cavity for the NLC Damping Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH064, pp. 924-926.
- S. Y. Lee and J. Wei, “Effect of the Induced Voltage on the Bunch Motion at the Transition Energy”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1169-1172.
- Z. Li, L. Ge, C.-K. Ng, and L. Xiao, “Recent Developments and Applications of Parallel Multi-Physics Accelerator Modeling Suite ACE3P”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 888-891.
- Y. L. Li, “3D Laser Pulse Shaping, Measurement, and 3D Eletron Beam Profile Measurement for Photinjectors”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOCI1, pp. 519-523.
- J. Campmany, J. Marcos, and V. Massana, “New Undulator and Front End for XAIRA Beamline at ALBA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4231-4233.
- T. Mitsuhashi, “Design and Constriction of Coronagraph for Observation of Beam Halo”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT070, pp. 2655-2657.
- Y. Xu et al., “Using CT algorithm to reconstruct electron beams transverse phase space in HUST-UED”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG44, pp. 2319-2322.
- P. Leban and G. Decker, “Initial Tests of New Electron and Photon Beam Position Monitor Electronics at the Advanced Photon Source”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD19, pp. 344-346.
- M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3263-3266.
- V. Volkov et al., “Beam Dynamics in RF-Gun Cavity with a Modified First Cell”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3W022, pp. 2796-2798.
- H. Takeda, “Semi-Analytical Calculation of Accelerating Beam in a Photo-Injector Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU425, pp. 369-371.
- A. L. Mints, K. F. Gertsev, and B. M. Gutner, “Electronic System of the 70-Ge V Proton Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 516-519.
- B. Hillenbrand, “The Preparation of Superconducting Nb3Sn Surfaces for RF Applications”, in Proc. 1st Int. Conf. RF Superconductivity (SRF'80), Karlsruhe, Germany, Jul. 1980, paper SRF80-3, pp. XX-XX.
- A. V. Watkins, M. Jensen, M. Maddock, S. A. Pande, S. Rains, and D. Spink, “RF Distribution System of the Diamond Master Oscillator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH168, pp. 3188-3190.
- X. P. Ding, D. B. Cline, J. S. Berg, H. G. Kirk, and A. A. Garren, “Robust 6D Muon Cooling in Four-sided Ring Cooler using Solenoids and Dipoles for a Muon Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP055, pp. 205-207.
- C. W. Potts, “An Instrument for Measuring Betatron Resonant Frequencies”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 382-387.
- M. Fulop, S. Ft?íccaron, and P. Ragan, “Cyklotron for Medical and Physical Uses in Slovak Republic”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper K-04, pp. 706-709.
- I. Skudnova, “Beam Dynamics Optimization in Drift Tube Linear Accelerator With Permanent Quadrupole Magnets”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 234-236.
- B. Podobedov and G. V. Stupakov, “New Method for Point-Charge Wakefield Calculation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEODB1, pp. 778-780.
- D. K. Kalantaryan and Y. L. Martirosyan, “Transfer Matrices for the Coupled Space Charge Dominated Six-dimensional Particle Motion”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT003, pp. 1135-1137.
- E. Pace and G. Di Pirro, “Using Memcached as Real-time Database in the SPARC Control System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THCB03, pp. 112-114.
- A. Barty, “Ultrafast Single-Shot Diffraction Imaging of Nanoscale Dynamics”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROBI1, pp. 715-715.
- T. Weilbach, K. Aulenbacher, and J. Dietrich, “Optical Electron Beam Diagnostics for Relativistic Electron Cooling Devices”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD48, pp. 158-160.
- M. Zobov, “Crab Waist Approach: from DAFNE to SuperB”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHX03, pp. 6-10.
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1148-1151.
- I. Igor et al., “VIL410, CPI's 1.3 GHz, 25 kW CW IOT Amplifier System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2305-2307.
- F. Hornstra, A. Brescia, M. Knott, and C. Swoboda, “On-Line Computer Monitoring and Optimization of a Multiple Target Proton Beam Line”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 823-827.
- J. L. Warren, G. P. Boicourt, M. T. Menzel, G. W. Rodenz, and M. C. Vasquez, “Revision of and Documentation for the Standard Version of the POISSON Group Codes”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2870-2873.
- J.-L. Fernandez-Hernando, “Activation and Residual Equivalent Dose Rate Studies for an ILC Betatron Spoiler Prototype”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP036, pp. 2869-2871.
- JP. de Brion, R. Dei-Cas, and H. Leboutet, “A Magnetic Compressor for a 5 MeV Electron Beam”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 961-964.
- H. O. Funsten and R. T. Siegel, “Meson Channel Design for the SREL Synchrocyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 508-510.
- D. Gorelov, J.-W. Kim, F. Marti, H. Podlech, X. Wu, and R. C. York, “Superconducting Driver Linac Beam Dynamics Optimization for RIA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH317, pp. 4086-4088.
- M. Emamian, M. S. Hutson, and G. Swift, “Optical Beam Line Design for the Duke Free Electron Laser Laboratory”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH036, pp. 2524-2526.
- W. E. Gabella, R. D. Ruth, and R. L. Warnock, “Refinement of the Hamilton-Jacobi Solution Using a Second Canonical Transformation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1591-1594.
- J. Welch and Z. Xu, “Low Loss Parameter for New CESR Electrostatic Separators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1851-1854.
- W. Joho, “The S.I.N. Ring Cyclotron after One Year of Operation”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1397-1402.
- K.-H. Park et al., “The Design of Low Noise Magnet Power Supply”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 136-138.
- A. Kanareykin et al., “New Developments on Low-loss Ferroelectrics for Accelerator Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH195, pp. 3251-3253.
- G.-H. Luo, C. K. Kuan, T. H. Lee, and D.-J. Wang, “Beam Parameters Measurement by a Pinhole Detector”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI095, pp. 1930-1932.
- Y. Hao, Y. Luo, V. Ptitsyn, and J. Qiang, “Scaling Properties of the Synchro-Beta Resonance in Crab Crossing Scheme of Future Electron Ion Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 766-768.
- V. V. Danilov and Z. Liu, “Studies of the Effect of 2nd Harmonic on the e-p Instability and RF Control of Instabilities”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C06, pp. 373-376.
- S. A. Nikitin, “Adiabatic Theory of Slow Extraction of Particles from a Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH086, pp. 2119-2121.
- M. Seidel and F. Willeke, “Layout of the Upgraded HERA Interaction Regions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B15, pp. 379-381.
- T. Miura, Y. Irie, Y. Sato, and H. Someya, “Beam Position Measurement Using Linac Microstructure at the KEK Booster Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB044, pp. 2509-2511.
- E. Barzi et al., “Nb3Al Prototype Conductor for the Transmission Line Magnet”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP155, pp. 3330-3332.
- J. E. Clendenin, T. Maruyama, G. A. Mulhollan, Yu. A. Mamaev, A. V. Subashiev, and Yu. P. Yashin, “Superlattice Photocathodes for Accelerator-Based Polarized Electron Source Applications”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA44, pp. 1988-1990.
- J. Alessi, A. Kponou, R. Raymond, and Th. Sluyters, “Status of the AGS Polarized Negative Ion Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2708-2710.
- A. P. Zhukov and S. Assadi, “SNS BLM System Overview: Detectors, Measurements, Simulations”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGF04, pp. 453-453.
- J. Takahashi et al., “Plunger Frequency Control of a Side Coupled Accelerating Structure for the IFUSP Microtron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P038, pp. 2998-3000.
Back to search