JaCoW Logo

Reference Search
Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. Furukawa et al., “Recent Improvement of Slow-extraction at HIMAC Synchrotron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOBLH01, pp. 267-269. 
[n]	R. L. Witkover, P. R. Cameron, T. J. Shea, R. C. Connolly, and M. Kesselman, “Beam Instrumentation for the Spallation Neutron Source Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA169, pp. 2250-2252. 
[n]	J. S. Berg and R. Palmer, “Cost Optimization of Non-Scaling FFAG Lattices for Muon Acceleration”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT158, pp. 902-904. 
[n]	T. Katsouleas, J. M. Dawson, D. Sultana, and Y. T. Yan, “A Side-Injected-Laser Plasma Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3554-3557. 
[n]	I. N. Meshkov, A. N. Sissakian, and G. V. Trubnikov, “Accelerator Applications for Basic and Applied Research at JINR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUZRA02, pp. 1319-1323. 
[n]	B. C. Brown, “Beam Loss Control for the Fermilab Main Injector”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO1B04, pp. 264-268. 
[n]	D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817. 
[n]	J. Xu, V. N. Aseev, B. Mustapha, and P. N. Ostroumov, “Parallelization of TRACK for Large Scale Beam Dynamic Simulations in Linear Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN100, pp. 3459-3461. 
[n]	H. C. Chen et al., “Transient Orbit of Injection in Taiwan Light Source Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4012-4015. doi:10.18429/JACoW-IPAC2016-THPOW033
[n]	P. A. Piminov and E. B. Levichev, “Symplectic Integrator for Particle Tracking in Complex Magnetic Field”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI054, pp. 1655-1657. 
[n]	R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Random Initial Displacement”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2398-2400. 
[n]	W. Kutschera, “Accelerator Mass Spectrometry at VERA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEYF101, pp. 245-252. 
[n]	D. Mihalcea, P. Piot, B. M. Cowan, and P. Stoltz, “Wakefield Generation in Compact Rectangular Dielectric-Loaded Structures Using Flat Beams”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP132, pp. 340-342. 
[n]	K. S. B. Li and G. Rumolo, “A Generic Data Model for HeadTail: Design and Implementation with Examples”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC075, pp. 307-309. 
[n]	T. Uesugi et al., “Beam Injection and Longitudinal Emittance Control in the JKJ 50 GeV Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE068, pp. 1311-1313. 
[n]	Q. Luo, N. Chen, G. Feng, and N. Hu, “MAGNET SUBSYSTEM OF HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME013, pp. 3537-3539. 
[n]	C. Garion, A. Poncet, F. Seyvet, M. Sitko, B. Skoczen, and J.-P. G. Tock, “Copper Heat Exchanger for the External Auxiliary Bus-bars Routing Line in the LHC Insertion Regions”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH191, pp. 508-510. 
[n]	W. Fischer et al., “LHC Beam-Beam Compensation Studies at RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3PBI03, pp. 1899-1903. 
[n]	Y. Kondo et al., “Upgrade of the 3-MeV LINAC for Testing of Accelerator Components at J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 960-963. doi:10.18429/JACoW-IPAC2019-MOPTS046
[n]	M. Kuntze, “Contribution to the Panel Discussion on Superconducting Linac Development”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 137-139. 
[n]	D. P. Missiaen, J.-P. Quesnel, and R. J. Steinhagen, “The Alignment of the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC04, pp. 1973-1975. 
[n]	G. Perez-Segurana et al., “Using ER@CEBAF to Show that a Multipass ERL Can Drive an XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1555-1558. doi:10.18429/JACoW-IPAC2021-TUPAB079
[n]	B. P. Murin, B. B. Bondarev, and A. P. Durkin, “An Approach to Design of a Robust Focusing Channel”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-44, pp. 731-733. 
[n]	S. Kusano, M. Tanaka, K. Furukawa, N. Kamikubota, M. Satoh, and N. Yamamoto, “The Operation Logbook System at KEKB Linac and Ring”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP528, pp. XX-XX. 
[n]	S. Wagner, R. Schmidt, B. Todd, J. A. Uythoven, and M. Zerlauth, “A Failure Catalogue for the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC174, pp. 2394-2396. 
[n]	A. I. Wawrzyniak et al., “Solaris Project Progress”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA046, pp. 181-183. 
[n]	H. Zen et al., “Stabilization of Mid-infrared FEL by Feedback Controls”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1745-1747. doi:10.18429/JACoW-IPAC2014-TUPRI077
[n]	C. Rosati and E. Laface, “New Approach in Developing Open XAL Applications”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4043-4046. doi:10.18429/JACoW-IPAC2017-THPAB137
[n]	S. Cousineau et al., “Measurement of Space Charge Effect on Transverse Emittance”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH028, pp. 2911-2913. 
[n]	M. A. Clarke-Gayther, “A High Stability Intensity Monitoring System for the ISIS Extracted Proton Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP079L, pp. 1713-1715. 
[n]	B. C. Jiang, M. Z. Zhang, Z. T. Zhao, and G. X. Xia, “Transverse Instabilities of Two Twisted Beams in a Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA043, pp. 172-174. 
[n]	R. Klatt and T. Weiland, “Electromagnetic Design of the HERA e- Vacuum”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1193-1196. 
[n]	K. J. Beczek and J. W. Lewellen, “A Versatile Method of Beamline Construction”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH108, pp. 1462-1464. 
[n]	H. Wang, T. E. Plawski, R. A. Rimmer, A. Dudas, and M. L. Neubauer, “Simulation and Experimental Studies of a 2.45GHz Magnetron Source for an SRF Cavity with Field Amplitude and Phase Controls”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 514-517. doi:10.18429/JACoW-IPAC2016-MOPMY002
[n]	F. Zimmermann, “The Electron Cloud Instability: Summary of Measurements and Understanding”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAB001, pp. 666-670. 
[n]	A. Afanasev et al., “Raising Photoemission Efficiency with Surface Acoustic Waves”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD083, pp. 1596-1598. 
[n]	M. Carillo et al., “A space charge forces analytical model for emittance compensation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3417-3420. doi:10.18429/JACoW-IPAC2023-WEPL133
[n]	C. H. Kuo, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C.-Y. Liao, “Operation Status of Bunch-by-bunch Feedback System in the TLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO015, pp. 514-516. 
[n]	M. Billing et al., “Techniques for Observing Beam Dynamical Effects Caused by the Presence of Electron Clouds”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST07, pp. 108-117. 
[n]	Y. Chi, “Development of 10 MeV electron linear accelerator for space environment simulation”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB031, unpublished. 
[n]	Y. Senichev et al., “Quasi-frozen Spin Method for EDM Deuteron Search”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 213-215. doi:10.18429/JACoW-IPAC2015-MOPWA044
[n]	M. A. Furman et al., “Self-consistent 3D Modeling of Electron Cloud Dynamics and Beam Response”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXAB03, pp. 764-768. 
[n]	M. Hostettler, K. Fuchsberger, and G. Papotti, “Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 374-376. doi:10.18429/JACoW-IPAC2017-MOPAB109
[n]	S. Battisti, P. Heymans, J. Kenaghan, J. Philippe, F. Rohner, and E. Sigaud, “A Flexible Wide-Band Analouge Network for Direct Signal Display on Operator Consoles”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2189-2192. 
[n]	R. E. Laxdal et al., “Extraction Exploiting nu;r = 3/2: Optical and Technical Constraints on Performance”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-08, pp. 248-251. 
[n]	A. V. Shemyakin et al., “Project X Injector Experiment: Goals, Plan and Status”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB102, pp. 1093-1095. 
[n]	T. P. Wangler, B. Blind, S. Nath, R. D. Ryne, and K. R. Crandall, “Beam Dynamics Design and Simulation Studies of the APT Superconducting Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRAR2, pp. 611-613. 
[n]	M. Bai et al., “Optics Measurements and Corrections at RHIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC056, pp. 1299-1301. 
[n]	T. Kamitani et al., “Beam Optics Matching in the KEKB Injector Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D019, pp. 429-431. 
[n]	M. Marx, B. Parker, K. Sinram, S. Wipf, and G. Woebke, “A Resistive Combined Function Magnet Suitable for Use Inside the HERA ep Interaction Regions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP51C, pp. 1975-1980. 
[n]	J. Kewisch and X. Chang, “Low Emittance Electron Beams for the RHIC Electron Cooler”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS087, pp. 3187-3189. 
[n]	A. Jansson, P. Lebrun, and J. T. Volk, “Beta Function Measurement in the Tevatron Using Quadrupole Gradient Modulation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT033, pp. 2272-2274. 
[n]	P. Dhakal, G. Ciovati, and G. R. Myneni, “A Path to Higher Q0 with Large Grain Niobium Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC091, pp. 2426-2428. 
[n]	D. Schoerling et al., “First Magnetic Test of a Superconducting Nb3Sn Wiggler Magnet for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR061, pp. 1957-1959. 
[n]	J. Qiang, “Recent Development of the IMPACT Parallel Beam Dynamics Code Suite”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBX01, pp. XX-XX. 
[n]	R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395. 
[n]	T. Konomi et al., “Trial of Nitrogen Infusion and Nitrogen Doping by Using J-PARC Furnace”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 775-778. doi:10.18429/JACoW-SRF2017-THPB021
[n]	M. Benedikt, S. Hancock, and M. Lindroos, “Base Line Design for a Beta-beam Neutrino Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT007, pp. 542-544. 
[n]	A. Aleksandrov, “Non-Destructive Heavy Metal Jet Profilometer for High Power Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH048, pp. 1330-1332. 
[n]	M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX. 
[n]	O. R. Jones et al., “Aperture Restriction Localisation in the LHC Arcs using an RF Mole and the LHC Beam Position Measurement System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP056, pp. 2644-2646. 
[n]	Y. Liu, P. He, and D. Cline, “Vacuum Laser Acceleration Tests”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA108, pp. 3639-3641. 
[n]	A. Adelmann, “RECENT RESULTS ON SIMULATIONS OF HIGH INTENSITY BEAMS IN CYCLOTRONS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 21A1, pp. XX-XX. 
[n]	C. A. Treml, S. K. Brown, and J. D. Bernardin, “Resonance Control Cooling System for a Proto-type Coupled Cavity Linac”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP076, pp. XX-XX. 
[n]	P. A. Wegner et al., “Status of the ACS-based Control System of the Mid-sized Telescope Prototype for the Cherenkov Telescope Array (CTA)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOAAB02, pp. 987-991. 
[n]	Y.-C. Chien et al., “Status of AC Power Supplies for TPS Booster Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3203-3205. doi:10.18429/JACoW-IPAC2015-WEPHA040
[n]	R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA003, pp. 10-14. 
[n]	A. J. Moss, P. A. Corlett, J. F. Orrett, and J. H. P. Rogers, “MICE RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP099, pp. 787-789. 
[n]	K. Howard, D. Bafia, Z. Sung, W. Dziedzic-Misiewicz, and Y.-K. Kim, “Identifying the connections between grain growth and flux expulsion in low RRR niobium SRF cavities”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 326-331. doi:10.18429/JACoW-SRF2025-TUP10
[n]	U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3631-3634. 
[n]	K. Saito et al., “RD Activities for ILC High Gradient Cavity in KEK”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP44, pp. 347-347. 
[n]	Y. Iwashita, M. Abe, T. Yako, Y. Fuwa, and N. Terunuma, “Steering Magnets with Permanent Magnets”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 264-266. doi:10.18429/JACoW-LINAC2018-MOPO125
[n]	S. Rodriguez Esparza, “LANSCE Wire Scanning Diagnostics Device Mechanical Design”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM013, pp. 127-131. 
[n]	X. H. Liu, H. Chen, W.-H. Huang, H. J. Qian, C.-X. Tang, and Z. Zhang, “Development of a Compact C-band Photocathode RF Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC022, pp. 116-118. 
[n]	M. I. Green, D. H. Nelson, and D. A. Van Dyke, “Harmonic-Error-Analysis Measurements of Dipole and Quadrupole Magnets at Lawrence Berkeley Laboratory”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1573-1576. 
[n]	S. M. Lidia, K. Floettmann, and P. Piot, “Recent Improvements to the ASTRA Particle Tracking Code”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG015, pp. 3500-3502. 
[n]	R. D?Âlling et al., “Beam Diagnostics at High Power Proton Beam Lines and Targets at PSI”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITTA02, pp. 228-232. 
[n]	G. Rumolo, W. Bruns, and Y. Papaphilippou, “Electron Cloud Build Up and Instability in the CLIC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP050, pp. 661-663. 
[n]	T. Kamps, G. A. Blair, F. Poirier, K. Balewski, and K. Wittenburg, “Simulation Studies and Background Measurements for a Laser Based Beam Size Monitor for the Future Linear Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH052, pp. 1342-1344. 
[n]	V. Forte, E. Benedetto, A. M. Lombardi, and D. Quartullo, “Longitudinal Injection Schemes For the CERN PS Booster at 160 MeV Including Space Charge Effects”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 378-381. doi:10.18429/JACoW-IPAC2015-MOPJE042
[n]	E. H. M. Wildner et al., “Status of the ESSnuSB Accumulator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3942-3944. doi:10.18429/JACoW-IPAC2015-THPF100
[n]	A. Xydou, G. Riddone, A. L. Vamvakas, and E. Daskalaki, “Thermo-mechanical Tests for the CLIC Two-beam Module Study”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1370-1372. doi:10.18429/JACoW-IPAC2014-TUPME013
[n]	T. Xin et al., “Design of the Fundamental Power Coupler and Photocathode Inserts for the 112 MHz Superconducting Electron Gun”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO014, pp. 83-86. 
[n]	I. Pinayev et al., “Giant Pulse Generation Using Gain Modulator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH111, pp. 2727-2729. 
[n]	A. N. Ermakov et al., “Rectangular Accelerating-Focusing Structure High Power Tests”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B02, pp. 889-891. 
[n]	A. Dubrovskiy, F. Tecker, M. Jacewicz, J. M. Y. Ruber, and V. G. Ziemann, “Flashbox Compact Beam Spectrometer and its Application to the High-gradient Acceleration Study”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA038, pp. 753-755. 
[n]	P. Elleaume et al., “Upgrade of the ESRF Accelerator Complex”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC010, pp. 2004-2006. 
[n]	R. E. Laxdal, R. Poirier, and A. Mitra, “THD15.pdf”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD15, pp. 941-943. 
[n]	M. Woodley and A. Wolski, “Normal Form Analysis of Linear Beam Dynamics in a Coupled Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT161, pp. 1503-1505. 
[n]	A. Donadon Servelle et al., “Current status and recent development of the Xcoll-FLUKA interface”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1117, unpublished. 
[n]	N. Akasaka, S. Hiramatsu, H. Koiso, M. Masuzawa, K. Satoh, and M. Tejima, “Beam-Based Calibration of Beam Position Monitors and Measurements of the Sextupole Magnet Offsets at KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A16, pp. 1780-1782. 
[n]	M. I. Grachev and E. V. Ponomareva, “Optical Design of the Proton Beam Lines for the Neutron Research Complex INR RAS and Medical Application”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC021, pp. 2049-2051. 
[n]	M. H. Rashid and R. K. Bhandari, “Profile of Loss Cone on Plasma Surface of the 14.4 GHz ECR Ion Source in Kolkata”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-05, pp. XX-XX. 
[n]	Y. T. Huang, C. K. Chan, C. S. Chen, J.-R. Chen, G.-Y. Hsiung, and Y.-H. Liu, “Relief of an Electric Field via a Cone Structure”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 550-553. doi:10.18429/JACoW-IPAC2014-MOPME078
[n]	C.-K. Min, S. H. Jung, H.-S. Kang, C. Kim, I. S. Ko, and S. J. Park, “RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4234-4236. doi:10.18429/JACoW-IPAC2016-THPOY057
[n]	A. Kolozhvari, S. Fiedler, and U. Ristau, “Vacuum Interlock Control System for EMBL Beamlines at PETRA III”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO011, pp. 57-59. 
[n]	D. Quartullo, E. N. Shaposhnikova, and H. Timko, “Controlled Longitudinal Emittance Blow-Up Using Band-Limited Phase Noise in CERN PSB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4473-4476. doi:10.18429/JACoW-IPAC2017-THPVA024
[n]	R. Kersevan, P. Berkvens, and P. Colomp, “Calculation, Measurement and Analysis of Vacuum Pressure Data and Related Bremsstrahlung Levels on Straight Sections of the ESRF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH171, pp. 1417-1419. 
[n]	Y. Ivanyushenkov et al., “Status of the Development of Superconducting Undulators for Storage Rings and Free Electron Lasers at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1068-1070. doi:10.18429/JACoW-NAPAC2016-THA1CO06
[n]	M. Larrañaga, R. Enparantza, and D. C. Plostinar, “Initial 2D Investigations into the Design and Parameters of an EM Quadrupole for FETS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC040, pp. 2097-2099. 
[n]	B. Zwicker, O. K. Kester, C. Dorn, P. Forck, and P. Kowina, “Performance Demonstration of the Non-Invasive Bunch Shape Monitor at GSI High Current LINAC”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD07, pp. 421-425. 
[n]	Y. T. Cheng et al., “Constructing and Installation of TPS Front End”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4007-4009. doi:10.18429/JACoW-IPAC2014-THPRI099
[n]	A. A. Aksoy, J. Esberg, and D. Schulte, “Bunch Compressor Design for CLIC Drive Beam”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2924-2926. doi:10.18429/JACoW-IPAC2014-THPRO028
[n]	K. Hanke et al., “Status of the LIU Project at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3397-3399. doi:10.18429/JACoW-IPAC2014-THPME070
[n]	H. Mizuno et al., “RF High Power Tests of the X-Band Windows in the TWR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-43, pp. 466-468. 
[n]	J. W. Verba, W. K??ndig, A. C. Paul, J. R. Richardson, and B. T. Wright, “Negative Ion Acceleration and Related Measurements”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63C03, pp. XX-XX. 
[n]	M. Marchhart et al., “Extending WinCC OA for Use as Accelerator Control System Core”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC123, pp. 395-398. 
[n]	C. Liang, “High - Tc Materials for Microwave Applications: Update, Progress, and Trends”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93D04, pp. XX-XX. 
[n]	R. M. Jones, I. R. R. Shinton, and B. Szczesny, “Third Harmonic Cavity Modal Analysis”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO025, pp. 599-603. 
[n]	X. Zhang, W. W. Destler, M. Reiser, C. D. Striffler, and R. L. Yao, “Intense Electron Beam Propagation Across a Magnetic Field”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1035-1038. 
[n]	B. K. Stillwell, B. Brajuskovic, H. Cease, D. L. Fallin, J. R. Noonan, and M. M. O, “Conceptual Design of a Storage Ring Vacuum System Compatible with Implementation of a Seven Bend Achromat Lattice at the APS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2409-2411. doi:10.18429/JACoW-IPAC2014-WEPME059
[n]	R. Jiang, F. Z. Chen, Z. C. Chen, and Y. B. Leng, “Identification of Faulty Beam Position Monitor Based Clustering by Fast Search and Find of Density Peaks”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 114-117. doi:10.18429/JACoW-IBIC2018-MOPC02
[n]	B. T. Fishler et al., “Rapid Software Prototyping into Large Scale Controls Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC038, pp. 166-168. 
[n]	S. Vilcins, M. Holz, and D. B. Bandke, “A New Sealing Technology for High Precision Wide Open UHV Vacuum Flange and Waveguide Connections With Metal Gaskets”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 125-128. doi:10.18429/JACoW-MEDSI2018-TUPH37
[n]	X. Yang, D. Abell, D. Sagan, G. Hoffstaetter, and M. Signorelli, “2D phase space tomography with SciBmad tracking”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP034, unpublished. 
[n]	D. Boussard and Y. Mizumachi, “Production of Beams with High Line-Density by Azimuthal Combination of Bunches in a Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3623-3626. 
[n]	T. Ebisawa et al., “Preparation of the Cryomodule Assembly for the Linear IFMIF Prototype Accelerator (LIPAc) in Rokkasho”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 726-729. doi:10.18429/JACoW-SRF2019-TUP105
[n]	A. Ferchau, T. Grundey, P. Pecher, P. Sch??tz, and U. Trinks, “The Superconducting Cavities for the TRITRON”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91B09, pp. XX-XX. 
[n]	A. A. Garren and L. Smith, “Diagnosis and Correction of Beam Behaviour in an Isochronous Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A03, pp. XX-XX. 
[n]	J. M. Belleman, “A New Trajectory Measurement System for the CERN Proton Synchrotron”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper CTTM01, pp. XX-XX. 
[n]	M. Scheer, “WAVE - A Computer Code for the Tracking of Electrons through Magnetic Fields and the Calculation of Spontaneous Synchrotron Radiation”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper TUACC2, pp. 86-88. 
[n]	T. Scarvie et al., “Noise Reduction Efforts for the Infrared Beamline at the Advanced Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB018, pp. 869-871. 
[n]	T. Mimashi et al., “The Pulsed Magnet System for the Simultaneous Injection of KEK-PF and KEKB Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP018, pp. 172-174. 
[n]	G. Coutrakon and M. Slater, “Design Considerations for Medical Proton Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOBC1, pp. 11-15.

For LaTeX

Use Complete Form

For BibTeX

References

Back to search