Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3085-3088.
[n] S. Krinsky and Y. N. Tang, “Use of Regularization Method in the Determining of Ring Parameters and Orbit Correction”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 492-494.
[n] C.-J. Jing et al., “Low Energy Linac for Electronic Brachytherapy”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 59-61. doi:10.18429/JACoW-LINAC2022-MOPOJO15
[n] M. El Ajjouri, F. Alves, A. Gamelin, and N. Hubert, “Design of the Beam Position Monitor for SOLEIL II”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 233-237. doi:10.18429/JACoW-IBIC2022-TUP09
[n] C. Xing and G. Shu, “Flat beam generation in photoinjectors for high brightness electron beams”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB047, unpublished.
[n] S. L. Kramer, M. Borland, J. Galayda, A. Jackson, H. Winick, and M. S. Zisman, “Study of Collective Effects in a Low-Emmittance PEP Lattice”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1208-1211.
[n] T. Yamaguchi et al., “Simulation study on power loss in the coupling cavity damper of the accelerating π/2 mode for the SuperKEKB ARES cavity”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2366-2369. doi:10.18429/JACoW-IPAC2025-WEPS059
[n] E. Trachanas et al., “ESS RFQ Electromagnetic Simulations Using CST Studio Suite”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2365-2368. doi:10.18429/JACoW-IPAC2022-WEPOMS049
[n] G. Doucas, M. Dumitru, M. F. Kimmitt, T. Kormann, G. Korschinek, and C. Stan-Sion, “A Photoelectron Source for the Study of Smith-Purcell Radiation”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP140G, pp. 748-752.
[n] O. Mohsen, R. Ainsworth, and A. V. Burov, “Investigation of Tail-dominated Instability in the Fermilab Recycler Ring”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 403-406. doi:10.18429/JACoW-HB2023-THAFP04
[n] M. C. Burton, A. D. Palczewski, H. L. Phillips, C. E. Reece, A-M. Valente-Feliciano, and R. A. Lukaszew, “RF Results of Nb Coated SRF Accelerator Cavities via HiPIMS”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 427-430. doi:10.18429/JACoW-LINAC2018-TUPO042
[n] A. Zholents et al., “Localized Chromaticity Correction of Low-Beta Insertions in Storage Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 131-134.
[n] J. H. Han, I. Bohnet, M. Krasilnikov, F. Stephan Deutsches Elektronen-Synchrotron, and K. Fl?Âttmann Deutsches Elektronen-Synchrotron, “Dark Current Measurements at the PITZ Rf Gun”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT29, pp. XX-XX.
[n] C. Haquin and C. Tréangle, “Refurbishment strategy of the GANIL cyclotrons control system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 640-645. doi:10.18429/JACoW-ICALEPCS2025-TUPD055
[n] X. Wu, L. Chen, W. Jia, G. Liu, X. Sun, and D. Zhang, “Studies on virtual platform for the HALF beamline”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB013, unpublished.
[n] M. Borland, “Coherent Synchrotron Radiation and Microbunching in Bunch Compressors”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO202, pp. 11-15.
[n] S. Schwarz, “The European X-ray Free Electron Laser Project at DESY”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper FRBIS01, pp. XX-XX.
[n] W. Barth and A. Schempp, “Funneling Study with a Low Energy Proton Beam”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3076-3079.
[n] A. Villa, A. Egurrola Areta, J. Feuchtwanger, P. Usabiaga, I. Arredondo, and J. M. Seara Eizaguirre, “Electromagnetic Simulations and Particle Tracking of a Compact 750 MHz IH DTL Accelerating Cavity”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4029, unpublished.
[n] W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2424-2427.
[n] A. Sessler, E. Henestroza, and S. Yu, “Ion Motion in the Adiabatic Focuser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH101, pp. 2149-2151.
[n] Y. T. Yuan, K. Fan, and Y. Jiang, “Cylindrical Cavity Design and Particle-Tracking Simulation in Cyclotron Auto-Resonance Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3689-3692. doi:10.18429/JACoW-IPAC2019-THPGW047
[n] R. A. Baartman, M. D'Yachkov, and F. W. Jones, “Modeling of Space-Charge Phenomena in Multi-Turn Tracking”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBL2, pp. 128-130.
[n] V. Balandin and N. Golubeva, “Investigation of Spin Resonance Crossing in Proton Circular Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 444-447.
[n] G. Jackson, “RF Capture Studies for Injection into a Synchrotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 402-405.
[n] A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3131-3134.
[n] T. Koseki, M. Izawa, S. Sakanaka, T. Takahashi, and K. Umemori, “Reduced Length Designs of 500 MHz Damped Cavity Using SiC Microwave Absorber”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF038, pp. 1048-1050.
[n] B. S. Martins, “Benefits and Drawbacks of Using Rust in an Existing C/C++ Codebase”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 930. doi:10.18429/JACoW-ICALEPCS2019-WECPR02
[n] J.-M. Ortega, F. Glotin, and R. Prazeres, “Wideband Infrared FEL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF036, pp. 384-386.
[n] N. Cufaro Petroni, S. De Martino, S. De Siena, F. Illuminati, and E. R. Caianiello, “Non Gaussien Transverse Distributions in a Stochastic Model for Beam Halos”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT086, pp. 2056-2058.
[n] P. Sunwong et al., “Design of non-linear kicker for Siam Photon Source II”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2348-2350. doi:10.18429/JACoW-IPAC2025-WEPS048
[n] M. N. Fodje, R. Berg, G. Black, P. Grochulski, and K. Janzen, “Automation of the Macromolecular Crystallography Beamlines at the Canadian Light Source”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL005, pp. 130-132.
[n] B. Y. Chen, M. Y. Hsu, L. Lai, X. Y. Li, D.-J. Wang, and G. C. Yin, “The Detector Adjustment System of Taiwan Photon Source 24A”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 294-296. doi:10.18429/JACoW-MEDSI2018-WEPH41
[n] A. Peters, J. M. Mosthaf, and C. Schoemers, “Major Upgrade of the HIT Accelerator Control System Using PTP and TSN Technology”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 739. doi:10.18429/JACoW-ICALEPCS2019-TUBPR03
[n] K. Whitham et al., “Installation and Commissioning of the e+/e- Injector for DAΦNE at Frascati”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA26, pp. 1116-1118.
[n] S. Fartoukh et al., “Evidence for a Strongly Coupled Dipole Mode with Insufficient Damping in TTF First Accelerating Module”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP110, pp. 922-924.
[n] W. Chou, A. I. Drozhdin, C. Johnstone, D. Ritson, and S. Ohnuma, “An Imaginary γt Lattice for the Fermilab Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH022, pp. 1711-1713.
[n] J. M. Brennan, C. E. Chen, J. W. Noe, P. Paul, A. Scholldorf, and G. D. Sprouse, “Bunching System for the Stony Brook Tandem Linac Heavy-Ion Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2798-2801.
[n] C. Baltador, A. Palmieri, A. Pisent, and F. Grespan, “Tuning of ESS DTLs”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 449-452. doi:10.18429/JACoW-LINAC2024-TUPB065
[n] C. K. Sinclair, Y. He, and C. H. Smith, “Design for a 1.3 MW, 13 MeV Beam Dump for an Energy Recovery Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE025, pp. 1877-1879.
[n] R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 334-337. doi:10.18429/JACoW-HB2018-WEP2PO032
[n] E. Effinger et al., “A Prototype Readout System for the Diamond Beam Loss Monitors at LHC”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC45, pp. 182-185.
[n] R. Hampel, W. F. O. M??ller, and T. Weiland, “ROCOCO - A Zero Dispersion Algorithm for Calculating Wake Potentials”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP30, pp. 144-147.
[n] E. Peoples-Evans, “Status and first results of the APS-U, the high-brightness upgrade of the Advanced Photon Source at the Argonne National Laboratory”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUZN2, unpublished.
[n] C.-M. Cheng et al., “The status of the X-ray beam position monitor in the TPS front end”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1327-1329. doi:10.18429/JACoW-IPAC2024-TUPG42
[n] F. Willeke, “Comparison of Measured and Calculated Dynamic Aperture”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG02, pp. 2747-2751.
[n] A. H. Lumpkin, Y.-C. Chae, R. J. Dejus, M. Erdmann, J. W. Lewellen, and Y. Li, “Use of VUV Imaging to Evaluate COTR and Beam-Steering Effects in a SASE FEL at 130 nm”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS50, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3085-3088.
- S. Krinsky and Y. N. Tang, “Use of Regularization Method in the Determining of Ring Parameters and Orbit Correction”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 492-494.
- C.-J. Jing et al., “Low Energy Linac for Electronic Brachytherapy”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 59-61.
- M. El Ajjouri, F. Alves, A. Gamelin, and N. Hubert, “Design of the Beam Position Monitor for SOLEIL II”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 233-237.
- C. Xing and G. Shu, “Flat beam generation in photoinjectors for high brightness electron beams”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB047, unpublished.
- S. L. Kramer, M. Borland, J. Galayda, A. Jackson, H. Winick, and M. S. Zisman, “Study of Collective Effects in a Low-Emmittance PEP Lattice”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1208-1211.
- T. Yamaguchi et al., “Simulation study on power loss in the coupling cavity damper of the accelerating π/2 mode for the SuperKEKB ARES cavity”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS059, pp. 2366-2369.
- E. Trachanas et al., “ESS RFQ Electromagnetic Simulations Using CST Studio Suite”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2365-2368.
- G. Doucas, M. Dumitru, M. F. Kimmitt, T. Kormann, G. Korschinek, and C. Stan-Sion, “A Photoelectron Source for the Study of Smith-Purcell Radiation”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP140G, pp. 748-752.
- O. Mohsen, R. Ainsworth, and A. V. Burov, “Investigation of Tail-dominated Instability in the Fermilab Recycler Ring”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THAFP04, pp. 403-406.
- M. C. Burton, A. D. Palczewski, H. L. Phillips, C. E. Reece, A-M. Valente-Feliciano, and R. A. Lukaszew, “RF Results of Nb Coated SRF Accelerator Cavities via HiPIMS”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 427-430.
- A. Zholents et al., “Localized Chromaticity Correction of Low-Beta Insertions in Storage Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 131-134.
- J. H. Han, I. Bohnet, M. Krasilnikov, F. Stephan Deutsches Elektronen-Synchrotron, and K. Fl?Âttmann Deutsches Elektronen-Synchrotron, “Dark Current Measurements at the PITZ Rf Gun”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT29, pp. XX-XX.
- C. Haquin and C. Tréangle, “Refurbishment strategy of the GANIL cyclotrons control system”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 640-645.
- X. Wu, L. Chen, W. Jia, G. Liu, X. Sun, and D. Zhang, “Studies on virtual platform for the HALF beamline”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB013, unpublished.
- M. Borland, “Coherent Synchrotron Radiation and Microbunching in Bunch Compressors”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO202, pp. 11-15.
- S. Schwarz, “The European X-ray Free Electron Laser Project at DESY”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper FRBIS01, pp. XX-XX.
- W. Barth and A. Schempp, “Funneling Study with a Low Energy Proton Beam”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3076-3079.
- A. Villa, A. Egurrola Areta, J. Feuchtwanger, P. Usabiaga, I. Arredondo, and J. M. Seara Eizaguirre, “Electromagnetic Simulations and Particle Tracking of a Compact 750 MHz IH DTL Accelerating Cavity”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4029, this conference.
- W. C. Barry, “Suppression of Propagating TE Modes in the FNAL Antiproton Source Stochastic Beam Cooling System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2424-2427.
- A. Sessler, E. Henestroza, and S. Yu, “Ion Motion in the Adiabatic Focuser”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH101, pp. 2149-2151.
- Y. T. Yuan, K. Fan, and Y. Jiang, “Cylindrical Cavity Design and Particle-Tracking Simulation in Cyclotron Auto-Resonance Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3689-3692.
- R. A. Baartman, M. D'Yachkov, and F. W. Jones, “Modeling of Space-Charge Phenomena in Multi-Turn Tracking”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUBL2, pp. 128-130.
- V. Balandin and N. Golubeva, “Investigation of Spin Resonance Crossing in Proton Circular Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 444-447.
- G. Jackson, “RF Capture Studies for Injection into a Synchrotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 402-405.
- A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3131-3134.
- T. Koseki, M. Izawa, S. Sakanaka, T. Takahashi, and K. Umemori, “Reduced Length Designs of 500 MHz Damped Cavity Using SiC Microwave Absorber”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF038, pp. 1048-1050.
- B. S. Martins, “Benefits and Drawbacks of Using Rust in an Existing C/C++ Codebase”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 930.
- J.-M. Ortega, F. Glotin, and R. Prazeres, “Wideband Infrared FEL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF036, pp. 384-386.
- N. Cufaro Petroni, S. De Martino, S. De Siena, F. Illuminati, and E. R. Caianiello, “Non Gaussien Transverse Distributions in a Stochastic Model for Beam Halos”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT086, pp. 2056-2058.
- P. Sunwong et al., “Design of non-linear kicker for Siam Photon Source II”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS048, pp. 2348-2350.
- M. N. Fodje, R. Berg, G. Black, P. Grochulski, and K. Janzen, “Automation of the Macromolecular Crystallography Beamlines at the Canadian Light Source”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL005, pp. 130-132.
- B. Y. Chen, M. Y. Hsu, L. Lai, X. Y. Li, D.-J. Wang, and G. C. Yin, “The Detector Adjustment System of Taiwan Photon Source 24A”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 294-296.
- A. Peters, J. M. Mosthaf, and C. Schoemers, “Major Upgrade of the HIT Accelerator Control System Using PTP and TSN Technology”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 739.
- K. Whitham et al., “Installation and Commissioning of the e+/e- Injector for DAΦNE at Frascati”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA26, pp. 1116-1118.
- S. Fartoukh et al., “Evidence for a Strongly Coupled Dipole Mode with Insufficient Damping in TTF First Accelerating Module”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP110, pp. 922-924.
- W. Chou, A. I. Drozhdin, C. Johnstone, D. Ritson, and S. Ohnuma, “An Imaginary γt Lattice for the Fermilab Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH022, pp. 1711-1713.
- J. M. Brennan, C. E. Chen, J. W. Noe, P. Paul, A. Scholldorf, and G. D. Sprouse, “Bunching System for the Stony Brook Tandem Linac Heavy-Ion Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2798-2801.
- C. Baltador, A. Palmieri, A. Pisent, and F. Grespan, “Tuning of ESS DTLs”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 449-452.
- C. K. Sinclair, Y. He, and C. H. Smith, “Design for a 1.3 MW, 13 MeV Beam Dump for an Energy Recovery Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE025, pp. 1877-1879.
- R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 334-337.
- E. Effinger et al., “A Prototype Readout System for the Diamond Beam Loss Monitors at LHC”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC45, pp. 182-185.
- R. Hampel, W. F. O. M??ller, and T. Weiland, “ROCOCO - A Zero Dispersion Algorithm for Calculating Wake Potentials”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP30, pp. 144-147.
- E. Peoples-Evans, “Status and first results of the APS-U, the high-brightness upgrade of the Advanced Photon Source at the Argonne National Laboratory”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUZN2, unpublished.
- C.-M. Cheng et al., “The status of the X-ray beam position monitor in the TPS front end”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG42, pp. 1327-1329.
- F. Willeke, “Comparison of Measured and Calculated Dynamic Aperture”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG02, pp. 2747-2751.
- A. H. Lumpkin, Y.-C. Chae, R. J. Dejus, M. Erdmann, J. W. Lewellen, and Y. Li, “Use of VUV Imaging to Evaluate COTR and Beam-Steering Effects in a SASE FEL at 130 nm”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS50, pp. XX-XX.
Back to search