JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Caruette, M. Fouaidy, T. Junquera, J. C. Le Scornet, and Q. S. Shu, “Analysis of Thermal Effects in TESLA SRF Cavities using Surface Scanning Thermometers”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP043L, pp. 2112-2114. 
[n]	M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512. 
[n]	J. Conrad et al., “Upgrade of a UHV Furnace for 1700 C Heat Treatment and Processing of Niobium Samples”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3709-3711. doi:10.18429/JACoW-IPAC2016-THPMY024
[n]	M. Trovo, S. M. Lidia, and G. Penco, “Further Studies in the FERMI@ELETTRA Photoninjector Optimization”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH028, pp. 625-628. 
[n]	D. Kanjilal et al., “High Current Injector at Nuclear Science Centre”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10008, pp. XX-XX. 
[n]	J. A. Crittenden et al., “Electron Cloud Modeling Results for Time-resolved Shielded Pickup Measurements at CesrTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP142, pp. 1752-1754. 
[n]	A. Neumann, W. Anders, S. Klauke, J. Knobloch, O. Kugeler, and M. Schuster, “Characterization of a Piezo-based Microphonics Compensation System at HoBiCaT”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH150, pp. 408-410. 
[n]	S. P. Kearney et al., “Mechanical Design of a Compact Non-invasive Wavefront Sensor for Hard X-rays”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 394-396. doi:10.18429/JACoW-MEDSI2018-THPH27
[n]	R. W. Garnett, S. S. Kurennoy, J. F. O, L. Rybarcyk, and A. Schempp, “Progress towards an RFQ-based Front End for LANSCE”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS068, pp. 2658-2660. 
[n]	D. P. May, D. R. Haenni, R. C. Rogers, P. Smelser, and D. H. Youngblood, “Status of the Texas AM K500 Superconducting Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper F-03, pp. 195-198. 
[n]	Y. Jiang, J. L. Hirshfield, S. Kazakov, and S. V. Kuzikov, “Multi-Harmonic Cavity for RF Breakdown Studies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP144, pp. 361-363. 
[n]	A. A. Starostenko, A. E. Levichev, and D. A. Nikiforov, “Commissioning of BINP Injection Complex VEPP-5”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP120, pp. 702-704. 
[n]	D. Kleiven, B. Auchmann, V. Raginel, R. Schmidt, A. P. Verweij, and D. Wollmann, “Experimental Setup to Measure the Damage Limits of Superconducting Magnets due to Beam Impact at CERN's HiRadMat Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4200-4202. doi:10.18429/JACoW-IPAC2016-THPOY044
[n]	A. J. Gee and B. Erdelyi, “Space Charge Map Extraction and Analysis in a Differential Algebraic Framework”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB31, pp. 103-107. 
[n]	I.-S. Hong et al., “Conceptual Design of the PEFP Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP093, pp. 3581-3583. 
[n]	G. Lebec, J. Chavanne, C. A. Kitegi, C. Penel, and F. Revol, “First Operational Experience with a Cryogenic Permanent Magnet Undulator at the ESRF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP067, pp. 2414-2416. 
[n]	K. R. Shin, A. E. Fathy, and Y. W. Kang, “Double-Gap Rebuncher Cavity Design of SNS MEBT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP069, pp. 3898-3900. 
[n]	T. Mitsuhashi and M. Tadano, “Beam Position and Angular Monitor for Undulator by Using SR Monitor Technique”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS037, pp. 3368-3370. 
[n]	L. Stingelin et al., “High Power RF Systems and Resonators for Sector Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CIO01, pp. 332-337. 
[n]	A. A. Nosych and U. Iriso, “Studies and Historical Analysis of ALBA Beam Loss Monitors”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 94-97. doi:10.18429/JACoW-IBIC2016-MOPG22
[n]	F. Schmidt, “Update on MAD-X and Future Plans”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE3IOPK04, pp. 117-121. 
[n]	F. Furuta et al., “Progress and challenges in traveling-wave (TW) SRF cavity”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 621-624. doi:10.18429/JACoW-LINAC2024-THAA009
[n]	H. Shaker, R. Corsini, P. K. Skowronski, I. Syratchev, and F. Tecker, “Phase Modulator Programming to Get Flat Pulses with Desired Length and Power from the CTF3 Pulse Compressors”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA043, pp. 1425-1427. 
[n]	N. Vinogradov, V. N. Aseev, M. R. L. Kern, P. N. Ostroumov, R. C. Pardo, and R. H. Scott, “Progress with the 2Q-LEBT Facility for the RIA Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB003, pp. 253-255. 
[n]	H. C. Hseuh, L. Snydstrup, W. S. Jiang, C. Pai, and M. Mapes, “Beam Vacuum Chambers for Brookhaven's Muon Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP11, pp. 2060-2063. 
[n]	M. H. Moscatello, C. Berthe, C. Jamet, and G. Normand, “Machine Protection System for the SPIRAL2 Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD044, pp. 2612-2614. 
[n]	Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3891-3894. doi:10.18429/JACoW-IPAC2016-THPOR046
[n]	K. Johnson and W. J. Ramler, “Cyclotron Beam Position Sensor”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F12, pp. XX-XX. 
[n]	A. Jankowiak et al., “The Bessy Vsr Project for Short X-Ray Pulse Production”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2833-2836. doi:10.18429/JACoW-IPAC2016-WEPOW009
[n]	A. O. Alrashdi, I. R. Bailey, and D. Newton, “Realistic Undulators for Intense Gamma-ray Beams at Future Colliders”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1756-1758. doi:10.18429/JACoW-IPAC2015-TUPJE057
[n]	F.-J. Decker et al., “Identifying Longitudinal Jitter Sources in the LCLS Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE071, pp. 2296-2298. 
[n]	J. W. Lewellen, C. E. Buechler, G. E. Dale, N. A. Moody, and D. C. Nguyen, “Spaceborne Electron Accelerators”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 32-37. doi:10.18429/JACoW-LINAC2016-MO3A03
[n]	A. Opanasenko, V. V. Mytrochenko, V. A. Goryashko, V. Zhaunerchyk, and P. M. Salen, “Fundamental Limits of Velocity Bunching of High-brightness Electron Beams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 304-306. doi:10.18429/JACoW-IPAC2014-MOPRO091
[n]	F. H. de S?â, H. O. C. Duarte, and L. Liu, “Update of the Collective Effects Studies for Sirius”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3680-3683. doi:10.18429/JACoW-IPAC2017-THPAB002
[n]	M. Kase, Y. Oikawa, M. Saito, I. Takeshita, Y. Yano, and I. Yokoyama, “Beam Diagnostic Equipments for RIKEN Ring Cyclotron and Its Beam Lines”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I5-01, pp. 443-446. 
[n]	I. Drebot, L. Serafini, D. Micieli, E. Tassi, E. Milotti, and V. Petrillo, “Breit-Wheeler Scattering Events Produced by Two Interacting Compton Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 261-264. doi:10.18429/JACoW-IPAC2017-MOPAB065
[n]	V. Sajaev, M. Borland, L. Emery, and A. Xiao, “Multi-objective Optimization of a Lattice for Potential Upgrade of the Advanced Photon Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP125, pp. 2354-2356. 
[n]	S. Petracca, T. Demma, and K. Hirata, “Luminosity in e+e- Ring Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI018, pp. 1392-1394. 
[n]	G. N. Kim et al., “Status of Pohang Neutron Facility Based on 100-MeV Electron Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU432, pp. 383-385. 
[n]	M. Boscolo et al., “Machine Detector Interface for the e+e- Future Circular Collider”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 201. doi:10.18429/JACoW-eeFACT2018-WEXBA02
[n]	S. V. Benson et al., “Demonstration of 3D Effects with High Gain and Efficiency in a UV FEL Oscillator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP171, pp. 2429-2431. 
[n]	T. Schietinger et al., “Commissioning Status of the SwissFEL Injector Test Facility”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC095, pp. 3110-3112. 
[n]	M. Blaskiewicz et al., “Transverse Instabilities in RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB007, pp. 3026-3028. 
[n]	H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 370-373. doi:10.18429/JACoW-IPAC2015-MOPJE038
[n]	V. A. Belyakov, R. N. Litunovsky, O. A. Minyaev, and D. V. Efremov, “Beam Extraction System in the Kiev 240-cm Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-27, pp. 326-328. 
[n]	L. Wang et al., “The Lattice Design of Hefei Advanced Light Source (HALS) Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC065, pp. 2142-2144. 
[n]	J. C. Ribes and G. Delaunay, “TUC01.pdf”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC01, pp. 488-490. 
[n]	O. A. Anderson, “Accurate Iterative Analysis of the K-V Equations”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT061, pp. 3535-3537. 
[n]	Y. Iwashita, “Axial Magnetic Field Lens with Permanent Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3154-3157. 
[n]	M. Antonelli et al., “Fast Beam Diagnostics for Third-Generation Synchrotrons by Means of Novel Diamond-based Photon BPMs”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3541-3543. doi:10.18429/JACoW-IPAC2014-THPME128
[n]	J. T. Maniscalco, D. Gonnella, D. L. Hall, M. Liepe, and E. N. Smith, “Hc2 Measurements of Superconductors”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB006, pp. 79-81. 
[n]	A. Matheisen et al., “Laboratory Activities on SC Cavities at DESY”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91A05, pp. XX-XX. 
[n]	W. P. Lysenko, “Matching Bunched Beams to Alternating Gradient Focusing Systems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2516-2519. 
[n]	M. Cargnelutti, M. Znidarcic, G. M. A. Calvi, A. Parravicini, E. Rojatti, and C. Viviani, “Turn-by-Turn Position Measurements at CNAO with the Libera Spark HR Prototype”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1870-1872. doi:10.18429/JACoW-IPAC2018-WEPAF024
[n]	F. Le Pimpec, “Commissioning Status of the European XFEL Photon Beam System”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 144-148. doi:10.18429/JACoW-FEL2017-MOP044
[n]	D. Wang, P. Emma, W. Graves, G. Huang, J. Wu, and T. Zwart, “Considerations on Beam Quality Control in MIT X-Ray FEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT027, pp. 1961-1963. 
[n]	M. Akemoto, S. Fukuda, H. Nakajima, T. Shidara, and H. Honma, “Long-Pulse Modulator for the Superconducting RF Test Facility at KEK”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP036, pp. 655-657. 
[n]	C. Pagani, D. Barni, A. Bosotti, P. Pierini, and G. Ciovati, “Design Criteria for Elliptical Cavities”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper FA003, pp. XX-XX. 
[n]	M. Boucard and Y. Rozier, “Compact X-Band Linear Accelerators Design for On-Site Industrial Applications”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP8002, unpublished. 
[n]	C. Ohmori et al., “RF Acceleration Systems for the JAERI-KEK Joint Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE090, pp. 2181-2183. 
[n]	G. Parzen, “A Mesh-Iteration Program for Field Calculations in Linac Cavities”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper F-9, pp. 537-542. 
[n]	J. Rausch, G. Franchetti, and A. Sherjan, “Tomographic reconstruction of longitudinal phase space from FCT measurements”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4080, unpublished. 
[n]	E. M. Laziev, H. G. Oxuzyan, and E. S. Pogossyan, “20 MW Pulsed Amplifying Klystron Operating in Positive Feedback Mode”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2978-2980. 
[n]	R. A. Michelotti, R. J. Brewton, N. K. Bultman, A. Mayer, R. A. Tennant, and J. L. Uher, “Materials Considerations for a High Power-Density Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2849-2852. 
[n]	M. J. Cola, M. B. Lyons, D. F. Teter, and R. C. Gentzlinger, “Dissimilar Metal Joints for the APT Superconducting Cavity's Cryogenic Plumbing System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP126, pp. 962-964. 
[n]	K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2787-2790. 
[n]	S. Johnson and D. Capista, “A Programmable Beam Intensity Display System for the Fermilab Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1505-1508. 
[n]	K. Harkay, Y. Cho, and E. Lessner, “Longitudinal Instability Analysis for the IPNS Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ22, pp. 3001-3003. 
[n]	M. Plum, “Electric Fields, Electron Production, and Electron Motion at the Stripper Foil in the Los Alamos Proton Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR22, pp. 3403-3405. 
[n]	N. Solyak, C. S. Mishra, J.-F. Ostiguy, A. Valishev, K. Ranjan, and P. Tenenbaum, “Emittance Preservation for the Curved ILC Main Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP064, pp. 192-194. 
[n]	D. Xiang, H. Ihee, I. S. Ko, S. J. Park, and X. J. Wang, “Femtosecond Electron Diffraction and its Application for Beam Characterization at the PAL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE067, pp. 3721-3723. 
[n]	J. Wenninger, B. Goddard, V. Kain, and J. A. Uythoven, “Beam Stability of the LHC Beam Transfer Line TI8”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP017, pp. 1523-1525. 
[n]	H. Hanerfeld, W. B. Herrmannsfeldt, M. B. James, and R. H. Miller, “SLC Injector Modeling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2510-2513. 
[n]	N. Kanellos, P. Moschovakos, S. Schlenker, and T. Alexopoulos, “Assessing WinCC OA project limits to guide DCS architecture for the Phase-II ATLAS upgrade”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 612-616. doi:10.18429/JACoW-ICALEPCS2025-TUPD039
[n]	C. Wang, J. L. Hirshfield, and V. P. Yakovlev, “Rectangular Diamond-Lined Accelerator Structure”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE012, pp. 1282-1284. 
[n]	J. J. Barnard, “Emittance Growth from Rotated Quadrupoles in Heavy Ion Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR02, pp. 3241-3244. 
[n]	D. Bozzini, V. Chareyre, A. Jacob, K. H. Mess, S. Russenschuck, and R. Solaz Cerdan, “Design of an Automatic System for the Electrical Quality Assurance during the Assembly of the Electrical Circuits of the LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF010, pp. 1612-1614. 
[n]	L. N. Blumberg and E. Blum, “Simulation of Emittance Dilution in Electron Storage Ring from Compton Backscattering”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3579-3582. 
[n]	G. R. White, D. Schulte, and N. J. Walker, “Multi-Bunch Simulations of the ILC for Luminosity Performance Studies”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP014, pp. 1368-1370. 
[n]	M. Yoshida, “New Concept of Small Delay Line Type RF Pulse Compressor Using Coupled Cavities”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP040, pp. 667-669. 
[n]	C.-K. Ng and T. Weiland, “Impedance Analysis of the PEP-II Vacuum Chamber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB18, pp. 3061-3063. 
[n]	A. Larionov, “NEW SCHEME FOR MAGNETIC COMPRESSION OF THE MULTIPLE BEAM AT THE POWERFUL MULTI-BEAM KLYSTRON”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH07, pp. XX-XX. 
[n]	W. Assmann, “Beam Dynamics in SLC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7B001, pp. 1331-1335. 
[n]	M. Suminski, I. Kozsar, J. Palluel, and M. Lipinski, “Evolution of White Rabbit network for large-scale deployment at CERN”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 664-669. doi:10.18429/JACoW-ICALEPCS2025-TUPD070
[n]	S. Yu, E. Henestroza, S. Eylon, and W. W. Chupp, “K+ Ion Source for the Heavy Ion Induction Linac System Experiment ILSE”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3199-3202. 
[n]	H. Burkhardt, B. Goddard, Y. Kadi, V. Kain, T. Risselada, and W. J. M. Weterings, “Collimation in the Transfer Lines to the LHC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP009, pp. 1135-1137. 
[n]	Nakagawa H., Arai S., Kishiro J., Marutsuka K., Mochiki K., Onoue K., Sato H., Shirakata M., Tanaka H., “Spill Servo Control by DSP”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P13, pp. XX-XX. 
[n]	P. Dhakal, G. Ciovati, and G. R. Myneni, “Measurements of Thermal Impedance on Superconducting Radiofrequency Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB030, pp. 154-158. 
[n]	H. Park, S. U. De Silva, and J. R. Delayen, “Superconducting Cavity for the Measurements of Frequency, Temperature, RF Field Dependence of the Surface Resistance”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB003, pp. 70-73. 
[n]	D. Boussard, “Performance of the LEP2 SRF System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9C001, pp. 2879-2883. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search