Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Barr?® et al., “Main Results of the SSC's Magnetic Field Mapping at GANIL”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-01, pp. 371-373.
[n] M. B. Alves, L. Liu, X. R. Resende, and F. H. de S?í, “Beam Lifetime Measurements in Sirius Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2186-2189. doi:10.18429/JACoW-IPAC2022-WEPOTK055
[n] T. Proslier et al., “Crystallinity in niobium oxides: a pathway for mitigation of two-level system defects in niobium 3D resonator for quantum applications”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOA02, unpublished.
[n] M. Borland et al., “Planned Use of Pulsed Crab Cavities for Short X-ray Pulse Generation at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN091, pp. 1127-1129.
[n] Wei Shi, Lin Yuzheng, Toshiyashu Higo, “A NEW METHOD FOR DISPERSION CURVES OF HOM IN PERIODICAL AXISYMMETRIC ACCELERATING STRUCTURES”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THBM05, pp. 153-155.
[n] A. Saini, C. M. Baffes, A. Z. Chen, V. A. Lebedev, L. R. Prost, and A. V. Shemyakin, “Design of PIP-II Medium Energy Beam Transport”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 905-908. doi:10.18429/JACoW-IPAC2018-TUPAF076
[n] H. Tanaka, T. Hara, and K. Soutome, “A novel design of a magnetic chicane with positive R56”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 130-133. doi:10.18429/JACoW-IPAC2025-MOPB033
[n] V. Scarpine et al., “Design of a non-invasive laser-based beam profile monitor system for the new Fermilab PIP-II superconducting H- linac”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 543-546. doi:10.18429/JACoW-IBIC2025-TUPMO31
[n] K. L. F. Bane, “Emittance Control for Very Short Bunches”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEYLH01, pp. 179-183.
[n] I. Sakai et al., “Opposite Field Septum Magnet System for the J-PARC 50GeV Ring Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT079, pp. 1339-1341.
[n] M. Gaowei and J. Cen, “New Methods of Synthesizing Ultra-Smooth and High Efficiency Alkali Antimonide Photocathodes for Future Light Sources”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper TUYBA5, unpublished.
[n] E. A. McEwen, V. Bookwalter, J. Leung, J. N. Blowers, and J. B. Szal, “Status of LCLS-II QA Systems Collaboration for Cyromodule Construction at TJNAF and FNAL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB120, pp. 1422-1424.
[n] Quan Shengwen, Zhao Kui, Zhang Baocheng, Hao jiankui, Wang Lifang, Zhu Feng, Chen Jiaer, “DC-SC INJECTOR FOR HIGH AVERAGE POWER FREE ELECTRON LASERS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEBM02, pp. XX-XX.
[n] T. Lucas et al., “Design, realisation, and high-power operation of the first Travelling-wave Photo-emission Electron Gun”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2141, unpublished.
[n] X. Buffat, “Suppression of Emittance Growth by a Collective Force: Van Kampen Approach”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2197-2200. doi:10.18429/JACoW-IPAC2022-WEPOTK059
[n] V. Rodin et al., “Overview of power deposition profiles in the LHC off-momentum cleaning section in Run 3”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 302-305. doi:10.18429/JACoW-IPAC2025-MOPM014
[n] J. N. Corlett et al., “Impedance and Instabilities in the NLC Damping Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH076, pp. 1841-1843.
[n] A. Bosotti, C. Albrecht, K. Jensch, L. Lilje, and R. Paparella, “A Fully Automated Device For Checking XFEL Piezo-Tuner Installation”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO049, pp. 693-697.
[n] C. Quitmann, “Introduction by the Chair”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUINGA0, unpublished.
[n] E. Al-Dmour, K. ?àhnberg, and M. J. Grabski, “Experience with the Vacuum System for the First Fourth Generation Light Source: MAX IV”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 10. doi:10.18429/JACoW-MEDSI2020-MOOA02
[n] A. S. Zabanov et al., “Simulation of the Electrostatic Deflector of DC140 Cyclotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 202-204. doi:10.18429/JACoW-RuPAC2021-MOPSA48
[n] A. Poyet, S. D. Fartoukh, N. Karastathis, Y. Papaphilippou, K. Skoufaris, and G. Sterbini, “Numerical Simulations of the DC Wire Prototypes in LHC for Enhancing the HL-LHC Performances”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 566-569. doi:10.18429/JACoW-IPAC2019-MOPMP052
[n] Y. K. Zhao, S. S. Jin, B. G. Sun, J. G. Wang, and F. F. Wu, “Effect of phase modulation on the transverse beam size and emittance of the HLS-II ring”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 158-161. doi:10.18429/JACoW-IBIC2020-WEPP26
[n] M. Yamanaka and K. Enami, “Tensile Tests of Large Grain Ingot Niobium at Liquid Helium Temperature”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 562. doi:10.18429/JACoW-SRF2021-WEPFDV005
[n] O. Sacristan De Frutos et al., “Characterisation of the Mechanical Behaviour of Superconducting Cables Used in High Field Magnets From Room Temperature Down to 77K”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3532-3535. doi:10.18429/JACoW-IPAC2017-WEPVA112
[n] Y. Okubo, S. Fujii, K. Suzuki, and T. E. Tanaka, “Status of High Efficiency Klystron Development in TETD”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3993-3995. doi:10.18429/JACoW-IPAC2018-THPAL148
[n] M. S. Gulley et al., “Dual-Energy Operations at LANSCE for Proton Induced Nuclear Cross Section Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP021, pp. 1337-1339.
[n] H. Hayano, H. Matsumoto, T. Naito, S. Takeda, T. Asaka, and M. Schmitz, “An 80 MeV Injector for ATF Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-72, pp. 236-238.
[n] C. Deiter, M. Kitel, and J. Schulz, “A Rapid Two Axis Scanner for Vacuum Environments With High EMP”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPA15, pp. XX-XX.
[n] J. H. Lee, P. J. Rodriguez, J. Ricks, and N. Us Saqib, “Cost-effective asset management for accelerator control systems: design and implementation for the ALS-U controls system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3289-3291. doi:10.18429/JACoW-IPAC2024-THPG18
[n] T. Watanabe, T. Ikeda, and M. Kase, “DEVELOPMENT OF A HIGHLY SENSITIVE CURRENT AND POSITION MONITOR WITH HTS SQUIDS AND AN HTS MAGNETIC SHIELD”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 21B4, pp. XX-XX.
[n] I. S. Guk et al., “The Permanent Magnets Magnetic Characteristics Change Under Effect of 10 MeV Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3742-3744. doi:10.18429/JACoW-IPAC2018-THPAL044
[n] S. Kim et al., “Simulation studies on optimization of hard and soft X-ray beamlines for parallel user service at the PAL-XFEL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 235-238. doi:10.18429/JACoW-IPAC2025-MOPB098
[n] Y. Yang, M. Omer, T. Shizuma, and Y. Taira, “Spatial polarization distribution measurements of gamma rays produced by inverse Compton scattering”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 194-196. doi:10.18429/JACoW-IPAC2025-MOPB063
[n] G. Sergentanis et al., “Initial Design of a Lumped Inductance Kicker for the FCC-ee”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7129, unpublished.
[n] M. A. Balcewicz, Y. Hao, H. Huang, C. Liu, and K. Zeno, “Space Charge Driven Third Order Resonance at AGS Injection”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 236-238. doi:10.18429/JACoW-NAPAC2022-MOPA82
[n] S.-A. Udongwo and U. van Rienen, “An open-source Python tool for the Maxwell eigenvalue problem and multipacting analysis in axisymmetric elliptical cavity structures”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 771-774. doi:10.18429/JACoW-IPAC2024-MOPS27
[n] K. A. Rezvykh and V. A. Romanov, “High-voltage Structure Development for the EGP-15 Tandem (Project)”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP24H, pp. 693-695.
[n] D. Soriano Guillén, S. Benedetti, M. Cerv, G. De Michele, and Ye. Ivanisenko, “Low Level RF System of the Light Proton Therapy Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 161-163. doi:10.18429/JACoW-LINAC2022-MOPOGE08
[n] B. Gkotse, F. Ravotti, and P. Jouvelot, “Automatic Web Application Generation From an Irradiation Experiment Data Management Ontology (IEDM)”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 688. doi:10.18429/JACoW-ICALEPCS2019-TUBPL01
[n] M. Repov et al., “Development of a New Measurement System for Beam Position Pickups in the LINAC and Beam Energy Measurement (Time of Flight) in the MEBT for Medaustron”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 238-240. doi:10.18429/JACoW-IBIC2022-TUP10
[n] J. Le Duff, “Advanced Accelerator RD at LAL/ORSAY”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE2-02, pp. 285-289.
[n] A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3165-3168.
[n] E. Vogel et al., “Considerations on the third harmonic RF of the European XFEL”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP17, pp. XX-XX.
[n] E. Liukkonen, T. Antaya, J. Bishop, and S. Motzny, “Design of the Central Regions for the MSU 500 MeV Superconducting Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-14, pp. 2107-2110.
[n] T. He et al., “Compensation of an elliptically polarizing undulator in the HLS-II storage ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 201-203. doi:10.18429/JACoW-IPAC2025-MOPB066
[n] L. A. Kull and C. B. Williams, “The Influence of Drift Distance on the Attainable Energy Resolution of a Bunched Electron Beam”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1097-1099.
[n] L. H. Waites, J. R. Alonso, J. M. Conrad, and D. Winklehner, “Status of the IsoDAR High-current H⁺₂ Cyclotron (HCHC-XX) Development”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOAO01, pp. 12-14.
[n] E. Fagotti et al., “First RIB production with SPES exotic beam facility at INFN-LNL”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 12-15. doi:10.18429/JACoW-HIAT2025-MOB01
[n] S. Barbanotti et al., “Design of the Prototypical Cryomodule for the EUROTRANS Superconducting Linac for Nuclear Waste Transmutation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP114, pp. 826-828.
[n] M. Yoshimoto, S. Kato, M. Kinsho, K. Okabe, P. K. Saha, and K. Yamamoto, “Evaluation of Activated Nuclides Due to Secondary Particles Produced in Stripper Foil in J-PARC RCS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1048-1050. doi:10.18429/JACoW-IPAC2018-TUPAL021
[n] E. J. Seppi, J. K. Cobb, and D. R. Jensen, “Establishment of Precise Magnetic Fields in the Momentum Analyzing System at SLAC”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 473-478.
[n] V. P. Struev et al., “External Neutron Source for Research Reactor Based on Linear Accelerator and Beryllium Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 754-756. doi:10.18429/JACoW-IPAC2014-MOPRI066
[n] K. J. Peach, “Novel Ideas and Ramp;D for High Intensity Neutrino Beams”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper FRXBCH01, pp. 281-285.
[n] C. Grech, G. Geloni, and M. W. Guetg, “Machine Learning Applied for the Calibration of the Hard X-Ray Single-Shot Spectrometer at the European XFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 965-968. doi:10.18429/JACoW-IPAC2022-TUPOST046
[n] M. Takahashi, H. Akasaka, Y. Kawamata, T. Kimura, and K. Kurihara, “Development of a VME Multi-Processor System for Plasma Control at the JT-60 Upgrade”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 438-441. doi:10.18429/JACoW-ICALEPCS1991-S12FC08
[n] P. Bryant, “Developments in the Design of Proton and Ion Accelerators for Medical Use”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper FRX01A, pp. 207-211.
[n] P. N. Ostroumov, V. N. Aseev, E. S. Lessner, and B. Mustapha, “Beam Loss Studies in High-intensity Heavy-ion Linacs”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT145, pp. 2176-2178.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Barr?® et al., “Main Results of the SSC's Magnetic Field Mapping at GANIL”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-01, pp. 371-373.
- M. B. Alves, L. Liu, X. R. Resende, and F. H. de S?í, “Beam Lifetime Measurements in Sirius Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2186-2189.
- T. Proslier et al., “Crystallinity in niobium oxides: a pathway for mitigation of two-level system defects in niobium 3D resonator for quantum applications”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOA02, unpublished.
- M. Borland et al., “Planned Use of Pulsed Crab Cavities for Short X-ray Pulse Generation at the Advanced Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN091, pp. 1127-1129.
- Wei Shi, Lin Yuzheng, Toshiyashu Higo, “A NEW METHOD FOR DISPERSION CURVES OF HOM IN PERIODICAL AXISYMMETRIC ACCELERATING STRUCTURES”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THBM05, pp. 153-155.
- A. Saini, C. M. Baffes, A. Z. Chen, V. A. Lebedev, L. R. Prost, and A. V. Shemyakin, “Design of PIP-II Medium Energy Beam Transport”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 905-908.
- H. Tanaka, T. Hara, and K. Soutome, “A novel design of a magnetic chicane with positive R56”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB033, pp. 130-133.
- V. Scarpine et al., “Design of a non-invasive laser-based beam profile monitor system for the new Fermilab PIP-II superconducting H- linac”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 543-546.
- K. L. F. Bane, “Emittance Control for Very Short Bunches”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEYLH01, pp. 179-183.
- I. Sakai et al., “Opposite Field Septum Magnet System for the J-PARC 50GeV Ring Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT079, pp. 1339-1341.
- M. Gaowei and J. Cen, “New Methods of Synthesizing Ultra-Smooth and High Efficiency Alkali Antimonide Photocathodes for Future Light Sources”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper TUYBA5, unpublished.
- E. A. McEwen, V. Bookwalter, J. Leung, J. N. Blowers, and J. B. Szal, “Status of LCLS-II QA Systems Collaboration for Cyromodule Construction at TJNAF and FNAL”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB120, pp. 1422-1424.
- Quan Shengwen, Zhao Kui, Zhang Baocheng, Hao jiankui, Wang Lifang, Zhu Feng, Chen Jiaer, “DC-SC INJECTOR FOR HIGH AVERAGE POWER FREE ELECTRON LASERS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEBM02, pp. XX-XX.
- T. Lucas et al., “Design, realisation, and high-power operation of the first Travelling-wave Photo-emission Electron Gun”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2141, this conference.
- X. Buffat, “Suppression of Emittance Growth by a Collective Force: Van Kampen Approach”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2197-2200.
- V. Rodin et al., “Overview of power deposition profiles in the LHC off-momentum cleaning section in Run 3”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM014, pp. 302-305.
- J. N. Corlett et al., “Impedance and Instabilities in the NLC Damping Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH076, pp. 1841-1843.
- A. Bosotti, C. Albrecht, K. Jensch, L. Lilje, and R. Paparella, “A Fully Automated Device For Checking XFEL Piezo-Tuner Installation”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO049, pp. 693-697.
- C. Quitmann, “Introduction by the Chair”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUINGA0, unpublished.
- E. Al-Dmour, K. ?àhnberg, and M. J. Grabski, “Experience with the Vacuum System for the First Fourth Generation Light Source: MAX IV”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 10.
- A. S. Zabanov et al., “Simulation of the Electrostatic Deflector of DC140 Cyclotron”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 202-204.
- A. Poyet, S. D. Fartoukh, N. Karastathis, Y. Papaphilippou, K. Skoufaris, and G. Sterbini, “Numerical Simulations of the DC Wire Prototypes in LHC for Enhancing the HL-LHC Performances”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 566-569.
- Y. K. Zhao, S. S. Jin, B. G. Sun, J. G. Wang, and F. F. Wu, “Effect of phase modulation on the transverse beam size and emittance of the HLS-II ring”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 158-161.
- M. Yamanaka and K. Enami, “Tensile Tests of Large Grain Ingot Niobium at Liquid Helium Temperature”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 562.
- O. Sacristan De Frutos et al., “Characterisation of the Mechanical Behaviour of Superconducting Cables Used in High Field Magnets From Room Temperature Down to 77K”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3532-3535.
- Y. Okubo, S. Fujii, K. Suzuki, and T. E. Tanaka, “Status of High Efficiency Klystron Development in TETD”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3993-3995.
- M. S. Gulley et al., “Dual-Energy Operations at LANSCE for Proton Induced Nuclear Cross Section Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP021, pp. 1337-1339.
- H. Hayano, H. Matsumoto, T. Naito, S. Takeda, T. Asaka, and M. Schmitz, “An 80 MeV Injector for ATF Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-72, pp. 236-238.
- C. Deiter, M. Kitel, and J. Schulz, “A Rapid Two Axis Scanner for Vacuum Environments With High EMP”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPA15, pp. XX-XX.
- J. H. Lee, P. J. Rodriguez, J. Ricks, and N. Us Saqib, “Cost-effective asset management for accelerator control systems: design and implementation for the ALS-U controls system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG18, pp. 3289-3291.
- T. Watanabe, T. Ikeda, and M. Kase, “DEVELOPMENT OF A HIGHLY SENSITIVE CURRENT AND POSITION MONITOR WITH HTS SQUIDS AND AN HTS MAGNETIC SHIELD”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 21B4, pp. XX-XX.
- I. S. Guk et al., “The Permanent Magnets Magnetic Characteristics Change Under Effect of 10 MeV Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3742-3744.
- S. Kim et al., “Simulation studies on optimization of hard and soft X-ray beamlines for parallel user service at the PAL-XFEL”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB098, pp. 235-238.
- Y. Yang, M. Omer, T. Shizuma, and Y. Taira, “Spatial polarization distribution measurements of gamma rays produced by inverse Compton scattering”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB063, pp. 194-196.
- G. Sergentanis et al., “Initial Design of a Lumped Inductance Kicker for the FCC-ee”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7129, this conference.
- M. A. Balcewicz, Y. Hao, H. Huang, C. Liu, and K. Zeno, “Space Charge Driven Third Order Resonance at AGS Injection”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 236-238.
- S.-A. Udongwo and U. van Rienen, “An open-source Python tool for the Maxwell eigenvalue problem and multipacting analysis in axisymmetric elliptical cavity structures”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS27, pp. 771-774.
- K. A. Rezvykh and V. A. Romanov, “High-voltage Structure Development for the EGP-15 Tandem (Project)”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP24H, pp. 693-695.
- D. Soriano Guillén, S. Benedetti, M. Cerv, G. De Michele, and Ye. Ivanisenko, “Low Level RF System of the Light Proton Therapy Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 161-163.
- B. Gkotse, F. Ravotti, and P. Jouvelot, “Automatic Web Application Generation From an Irradiation Experiment Data Management Ontology (IEDM)”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 688.
- M. Repov et al., “Development of a New Measurement System for Beam Position Pickups in the LINAC and Beam Energy Measurement (Time of Flight) in the MEBT for Medaustron”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 238-240.
- J. Le Duff, “Advanced Accelerator RD at LAL/ORSAY”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE2-02, pp. 285-289.
- A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3165-3168.
- E. Vogel et al., “Considerations on the third harmonic RF of the European XFEL”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP17, pp. XX-XX.
- E. Liukkonen, T. Antaya, J. Bishop, and S. Motzny, “Design of the Central Regions for the MSU 500 MeV Superconducting Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-14, pp. 2107-2110.
- T. He et al., “Compensation of an elliptically polarizing undulator in the HLS-II storage ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB066, pp. 201-203.
- L. A. Kull and C. B. Williams, “The Influence of Drift Distance on the Attainable Energy Resolution of a Bunched Electron Beam”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1097-1099.
- L. H. Waites, J. R. Alonso, J. M. Conrad, and D. Winklehner, “Status of the IsoDAR High-current H⁺₂ Cyclotron (HCHC-XX) Development”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOAO01, pp. 12-14.
- E. Fagotti et al., “First RIB production with SPES exotic beam facility at INFN-LNL”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOB01, pp. 12-15.
- S. Barbanotti et al., “Design of the Prototypical Cryomodule for the EUROTRANS Superconducting Linac for Nuclear Waste Transmutation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP114, pp. 826-828.
- M. Yoshimoto, S. Kato, M. Kinsho, K. Okabe, P. K. Saha, and K. Yamamoto, “Evaluation of Activated Nuclides Due to Secondary Particles Produced in Stripper Foil in J-PARC RCS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1048-1050.
- E. J. Seppi, J. K. Cobb, and D. R. Jensen, “Establishment of Precise Magnetic Fields in the Momentum Analyzing System at SLAC”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 473-478.
- V. P. Struev et al., “External Neutron Source for Research Reactor Based on Linear Accelerator and Beryllium Target”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 754-756.
- K. J. Peach, “Novel Ideas and Ramp;D for High Intensity Neutrino Beams”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper FRXBCH01, pp. 281-285.
- C. Grech, G. Geloni, and M. W. Guetg, “Machine Learning Applied for the Calibration of the Hard X-Ray Single-Shot Spectrometer at the European XFEL”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 965-968.
- M. Takahashi, H. Akasaka, Y. Kawamata, T. Kimura, and K. Kurihara, “Development of a VME Multi-Processor System for Plasma Control at the JT-60 Upgrade”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S12FC08, pp. 438-441.
- P. Bryant, “Developments in the Design of Proton and Ion Accelerators for Medical Use”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper FRX01A, pp. 207-211.
- P. N. Ostroumov, V. N. Aseev, E. S. Lessner, and B. Mustapha, “Beam Loss Studies in High-intensity Heavy-ion Linacs”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT145, pp. 2176-2178.
Back to search