JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. G. Shirkov, “Intercation of the Biomolecular Ions with the Electron Target in the Electrostatic Storage Ring”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA018, pp. 80-82. 
[n]	C. W. Huang et al., “Progress of a Gradient Damping Wiggler of the ALPHA Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP236, pp. 1265-1267. 
[n]	B. I. Grishanov, A. I. Butakov, and F. V. Podgorny, “Injection and Extraction at Damping Ring of an Electron-Positron Injection Complex VEPP5”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH122, pp. 1496-1498. 
[n]	J. Lu et al., “Preliminary Mechanical Design of Ceramic Pipe Film Coating Equipment at Hefei Light Source II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2988-2990. doi:10.18429/JACoW-IPAC2015-WEPMN028
[n]	A. Ferrarotto, B. Riemann, T. Weis, H.-W. Glock, T. Kamps, and J. Voelker, “A Novel Transverse Deflecting Cavity for Slice Diagnostics at BERLinPro”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 827-829. doi:10.18429/JACoW-IPAC2015-MOPHA024
[n]	S. N. Andrianov and V. Taryanik, “Modeling and Optimization Codes for Mass-Separator Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B14, pp. 1348-1350. 
[n]	J. D. Fox et al., “Operation and Performance of a Longitudinal Damping System using Parallel Digital Signal Processing”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1619-1622. 
[n]	T. A. Pelaia II et al., “Open XAL Status Report 2015”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1270-1272. doi:10.18429/JACoW-IPAC2015-MOPWI050
[n]	J. Rose, “Calculations of HOMs and Coupled Bunch Instabilities due to the RHIC RF Cavities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2143-2146. 
[n]	C. Maroli, A. Bacci, M. Ferrario, V. Petrillo, and L. Serafini, “Production of Coherent X-Rays with a Free-Electron Laser Based on Optical Wiggler”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG343, pp. XX-XX. 
[n]	P. Y. Beauvais, G. Haouat, and N. Pichoff, “Halo Formation from Beam Coulomb Scattering on Residual Gas”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP017L, pp. 1209-1211. 
[n]	D. Ressmann, A. Kopmann, V. Mauch, W. Mexner, and A. Vondrous, “Data Management at the Synchrotron Radiation Facility ANKA”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO202, pp. 13-15. 
[n]	L. P. Sun et al., “RF System Operation of High Current RFQ in ADS Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3613-3615. doi:10.18429/JACoW-IPAC2018-THPAL002
[n]	S. Nath, “Front End Physics Design of APT Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP16, pp. 680-682. 
[n]	T. Honda et al., “Results of the Straight-sections Upgrade of the Photon Factory Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS036, pp. 3365-3367. 
[n]	M. C. Crowley-Milling and G. Saxon, “The Use of a Debuncher in the Injection Path of an Electron Synchrotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 968-970. 
[n]	E. D. Cantero et al., “Performance Tests of a Short Faraday Cup Designed for HIE-ISOLDE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME072, pp. 646-648. 
[n]	M. Weiss et al., “Successful High Power Test of a Proton Linac Booster (LIBO) Prototype for Hadrontherapy”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA003, pp. 642-644. 
[n]	M. Dal Forno, A. Jensen, R. D. Ruth, and S. G. Tantawi, “Multi-Dimensional RF Sources Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 501-503. doi:10.18429/JACoW-IPAC2016-MOPMW042
[n]	F. Tamura and H. Mizuno, “A New Measurement Method of the Delay Line Length in the X-Band Delay Line Distribution System (DLDS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P068, pp. 3767-3769. 
[n]	M. Wolf et al., “Expansion of the MTCA Based Direct Sampling LLRF at MedAustron for Hadron Synchrotron Applications”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 63-65. doi:10.18429/JACoW-IBIC2023-MOP013
[n]	Y. G. Son, T. Asaka, K. R. Kim, S. H. Nam, and S. J. Park, “Design of Electron Gun System for the PLS-II Linear Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP088, pp. 1751-1753. 
[n]	M. P. Crouch, R. Appleby, B. D. Muratori, and T. Pieloni, “Possible Beam-beam and Levelling Scenarios for HL-LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1071-1073. doi:10.18429/JACoW-IPAC2014-TUPRO026
[n]	M. M. Paoluzzi, M. E. Angoletta, A. Findlay, M. Haase, and M. Jaussi, “Beam Tests and Plans for the CERN PS Booster Wideband RF System Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA065, pp. 2660-2662. 
[n]	A. Dipace, A. Renieri, and E. Sabia, “2D Simulation of FEL Amplifiers”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 555-557. 
[n]	N. Mounet et al., “Collimator Impedance Measurements in the LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA047, pp. 1817-1819. 
[n]	A. Bungau, R. J. Barlow, J. R. Alonso, J. M. Conrad, J. Spitz, and M. Shaevitz, “Optimisation Studies of a High Intensity Electron Antineutrino Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI073, pp. 449-451. 
[n]	L. Celona et al., “A High Intensity Proton Source for the European Spallation Source Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2509-2511. doi:10.18429/JACoW-IPAC2015-WEPWA010
[n]	O. Piquet et al., “ESS RFQ: Construction Status and Power Couplers Qualification”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 855-857. doi:10.18429/JACoW-IPAC2019-MOPTS008
[n]	S. Hancock, P. Knaus, and M. Lindroos, “Tomographic Measurements of Longitudinal Phase Space Density”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08H, pp. 1520-1522. 
[n]	R. E. Laxdal et al., “Status of Superconducting Electron Linac Driver for Rare Ion Beam Production at TRIUMF”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC01, pp. 31-35. 
[n]	C. Kiel, J. Keintzel, and F. Zimmermann, “Modelling resonant depolarisation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 298-301. doi:10.18429/JACoW-IPAC2025-MOPM013
[n]	S. Machida and E. Forest, “Beam Optics and Dynamics of FFAG Accelerators - Application of TPSA and Polymorphism -”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper D-3, pp. XX-XX. 
[n]	R. Russo et al., “UHV Arc for Superconducting Niobium Film Deposition”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP38, pp. 402-406. 
[n]	B. Salvachua et al., “Observations of Beam Losses at the LHC During Reduction of Crossing Angle”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2105-2108. doi:10.18429/JACoW-IPAC2017-TUPVA025
[n]	Q. Barton, “ELISE, a Code for Intensity Dependent Effects”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 284-287. 
[n]	J. M. Han, Y.-S. Cho, B. H. Choi, and H. H. Lee, “RF Coupler Design for the KTF RFQ Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH311, pp. 1210-1212. 
[n]	A. K. Orduz, A. Berjillos, C. Bontoiu, J. A. Duenas, I. Martel, and A. Garbayo, “Thermal and Structural Analysis of the 72.75 MHz LINCE RFQ”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3857-3860. doi:10.18429/JACoW-IPAC2015-THPF076
[n]	G. LeMeur and F. Touze, “PRIAM/ANTIGONC:Documents and SettingsSaraMy DocumentsPAC Work a 2D/3D Package for Acclerator Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1321-1324. 
[n]	T. Tajima, H. Miwa, Co. Ltd, and H. Ohta, “Evaluation of Dust Particles in the KEK Clean Room and Cleaning Methods Used for SC Cavity Assembly”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I38, pp. XX-XX. 
[n]	A. Uchiyama, K. Furukawa, and Y. Higurashi, “EPICS Channel Access Using WebSocket”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WECC02, pp. 7-9. 
[n]	K. Ito et al., “Development of Pulsed Multipole Magnet for Aichi SR Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1616-1618. doi:10.18429/JACoW-IPAC2015-TUPJE005
[n]	D. J. Liska, N. Bultman, and L. O. Carlisle, “Thermal Design of Drift Tubes for High-Gradient Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-4, pp. 46-47. 
[n]	J. Norem et al., “Bunch Shortening Experiments in the Fermilab Booster and the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W024, pp. 396-398. 
[n]	V. N. Litvinenko, Y. Wu, B. Burnham, J.M.J. Madey, and S. H. Park, “Performance of Achromatic Lattice with Combined Function Sextupoles at Duke Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB22, pp. 796-798. 
[n]	G. G. Voronin, A. S. Ivanov, and M. P. Svinjin, “Research and Applied Neutron Generators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1849-1852. 
[n]	Y. Zou et al., “Status of the ESSnuSB Accumulator Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 666-668. doi:10.18429/JACoW-IPAC2019-MOPRB046
[n]	T. Pulampong, P. Klysubun, S. Kongtawong, S. Krainara, and P. Sudmuang, “Online Optimisation Applications at SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4086-4088. doi:10.18429/JACoW-IPAC2017-THPAB151
[n]	G. Benincasa et al., “Rejuvenation of the CPS Control System: The First Slice”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1353-1356. 
[n]	Z. Zaharieva, M. Martin Marquez, and M. Peryt, “Database Foundation for the Configuration Management of the CERN Accelerator Controls Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU004, pp. 48-51. 
[n]	D. Gurd et al., “Recent Developments in the TRIUMF Control  System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 631-634. 
[n]	F. Claus et al., “Observation, Control and Modal Analysis of Coupled-Bunch Longitudinal Instabilities”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO05A, pp. 346-348. 
[n]	J. F. Wagner et al., “First Attempts at using Active Halo Control at the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2486-2489. doi:10.18429/JACoW-IPAC2016-WEPMW028
[n]	O. A. Shevchenko and N. Vinokurov, “Statistical Theory of the SASE FEL Based on the Two-particle Correlation Function Equation”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOOA02, pp. 8-14. 
[n]	S. Tazzari et al., “UHV Arc Deposition for RF Superconducting Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP37, pp. 397-401. 
[n]	I. Ben-Zvi et al., “Electron Cooling for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA011, pp. 48-50. 
[n]	T. Aoki, “Algorithm of Reconstructing Particle Distribution in N-dimensional Phase Space from Profile in Beam Transport”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2256-2258. doi:10.18429/JACoW-IPAC2015-TUPWI007
[n]	S. D?Âbert et al., “Operating Experience with SC Resonators at the S-DALINAC”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A18, pp. 176-183. 
[n]	Y. Kang and A. Nassiri, “Waveguide Harmonic Damper for Klystron Amplifier”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4069, pp. 555-557. 
[n]	I. Moya et al., “Manufacturing and Testing of the First Phase Shifter Prototypes Built by CIEMAT for the European-XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC174, pp. 3308-3310. 
[n]	E. Prebys, R. J. Abergel, W. H. Casey, and D. A. Cebra, “Development of 211-Astatine Production in the Crocker Nuclear Laboratory Cyclotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3564-3567. doi:10.18429/JACoW-IPAC2019-THPMP051
[n]	H. Herminghaus, “Survey on C.W. Electron Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0001, pp. 275-281. 
[n]	D.-O. Jeon and P. Chu, “Transverse Matching of the SNS Linac Based on Profile Measurements”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA105, pp. 250-252. 
[n]	I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917. 
[n]	V. Roger, T. H. Nicol, and Y. O. Orlov, “Design of the High Beta 650 MHz Cryomodule - PIP II”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 149-151. doi:10.18429/JACoW-NAPAC2016-MOPOB36
[n]	P. Latham, “The Use of a Single Source to Drive a Binary Peak Power Multiplier”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-38, pp. 623-624. 
[n]	T. Ota et al., “Activities on Superconducting Cavities at Toshiba”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A28, pp. 254-260. 
[n]	A. Marusic, M. G. Minty, and S. Tepikian, “Chromaticity Feedback at RHIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC031, pp. 525-527. 
[n]	Y. Zhao, X. Q. Wang, J. D. Wallace, G. Schaffer, J. D. Rogers, and P. D. Coleman, “RF System Analyses for the SSC Collider Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1256-1259. 
[n]	J. Rainwater, “Status of the Nevis Synchrocyclotron Modification (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 165-179. 
[n]	A. Young and L. E. Eaton, “RF System Specifications for a Linear Accelerator”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-29, pp. 121-123. 
[n]	M.-S. Yeh, “Low-level RF Control System for the Taiwan Photon Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC163, pp. 463-465. 
[n]	P. van Amersfoort et al., “The Electron Accelerator for FELIX”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-01, pp. 305-307. 
[n]	D. Tommasini, G. Petrucci, R. P. Walker, and D. Zangrando, “Design, Construction & Testing of the Corrector Magnets for ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2226-2229. 
[n]	G.S.Kraynov, A.S.Krivenko, V.V.Shirokov, I.N.Sorokin, “THE GAS CHARGE-EXCHANGE TARGET OF THE TANDEM ACCELERATOR WITH VACUUM INSULATION”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUJP05, pp. XX-XX. 
[n]	G. H. Gillespie, “Wakefields in the TRACE 3-D Code”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP73, pp. 845-847. 
[n]	S. S. Win, H. Fukuma, K. Ohmi, and S. Kurokawa, “Simulation Study of Coupled-Bunch Instability due to Electron Cloud in Super KEKB”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99912, pp. XX-XX. 
[n]	I. P. S. Martin, R. Bartolini, and B. Singh, “Impact of the DIAD Wiggler and ÔÇÖMissing-sextupoleÔÇÖ Optics on the Diamond Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1581-1584. doi:10.18429/JACoW-IPAC2019-TUPGW077
[n]	V. Berland, H. Gerstenberg, D. Hagedorn, and F. Rodriguez-Mateos, “Annealing of Superconducting Magnet Protection Diodes for the LHC After Irradiation at Liquid Helium Temperatures”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP015G, pp. 2234-2236. 
[n]	D. Barna, W. Bartmann, J. Borburgh, C. Carli, and G. Vanbavinckhove, “Field Simulations and Mechanical Implementation of Electrostatic Elements for the ELENA Transfer Lines”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 855-857. doi:10.18429/JACoW-IPAC2014-MOPRI101
[n]	R. Hettel, D. Mostowfi, R. Ortiz, and J. Sebek, “Triggers and Timing System for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1478-1481. 
[n]	B. Visentin et al., “Experimental Results on 700 MHz Multicell Superconducting Cavity for Proton Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB047, pp. 1303-1305. 
[n]	K. Saadatmand and N. C. Okay, “Performance of the SSC RF-Driven Volume Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-21, pp. 97-99. 
[n]	L. Emery, M. Borland, G. Decker, K. C. Harkay, E. R. Moog, and R. Nassiri, “Accelerator Aspects of the Advance Photon Source Upgrade”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCS2, pp. 766-768. 
[n]	C. Peterson and R. Laubert, “Carbon Accumulation on Target Surfaces Irradiated by Protons”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1542-1545. 
[n]	F. Pedersen, W. Pirkl, and K. Schindl, “Tackling Transverse Coherent Instabilities of Co- and  Counter-Rotating Beams in the CERN Antiproton Accumulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2343-2346. 
[n]	M. Masaki et al., “Development of a Highly Efficient Energy Kicker for Longitudinal Bunch-by-Bunch Feedback”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC18, pp. 407-410. 
[n]	A. Noda, M. Kanazawa, K. Noda, T. Watanabe, and M. Yoshizawa, “Evaluation of the Dynamic Aperture of TARN II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 806-809. 
[n]	A. C. Lira, G. Monteiro, L. H. Oliveira, and A. R. Silva, “Power Supplies for the LNLS 500-MeV Booster Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH017, pp. 3702-3704. 
[n]	G. Papotti, “A Beam Quality Monitor for LHC Beams in the SPS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC144, pp. 3324-3326. 
[n]	T. Watanabe, K. Nakamura, T. Ueda, and M. Uesaka, “Diagnostics of Subpicosecond Electron Pulse by the Fluctuation Method”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH119, pp. 2362-2364. 
[n]	M. Aramaki, N. Hayashizaki, and D. Nagae, “Beam delivery system for BNCT at Tokyo Institute of Technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4964-4966. doi:10.18429/JACoW-IPAC2023-THPM034
[n]	D. Tong, L. Xiao, and Y. Ni, “Non-Intrusive Diagnosis of Individual Cell Frequencies in a Cavity Chain”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E206, pp. 626-630. 
[n]	I. Birkel, E. Huttel, A.-S. M??ller, N. J. Smale, and P. Wesolowski, “Energy Dependent Measurements of Gamma and Neutron Dose at ANKA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD018, pp. 484-486. 
[n]	G. Andonian, S. Boucher, P. Frigola, A. Y. Murokh, and G. Travish, “A Real-time Bunch Length Terahertz Interferometer”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC073, pp. 1218-1220. 
[n]	Y. L. Li, K. Balewski, and W. Decking, “Beam Dynamics Study for PETRA III Including Damping Wigglers”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT066, pp. 1999-2001. 
[n]	Y. Ito, Y. Hosaka, K. Sakaue, and M. Washio, “Development of a Pulse Radiolysis System by Ultra-fast Super Continuum Probe at Waseda University”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2265-2267. doi:10.18429/JACoW-IPAC2015-TUPWI010
[n]	Y. Funakoshi, “Summary on Accelerator Infrastructures and Commissioning”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 290. doi:10.18429/JACoW-eeFACT2018-THXBA01
[n]	N. Charitonidis et al., “The Beam Lines Design for the CERN Neutrino Platform in the CERN North Area and an Outlook on Their Expected Performance”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2382-2384. doi:10.18429/JACoW-IPAC2017-TUPVA124
[n]	L. G. Foggetta, B. Buonomo, and P. Valente, “Evolution of Diagnostics and Services of the DANE Beam Test Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 904-906. doi:10.18429/JACoW-IPAC2015-MOPHA049
[n]	S. Matsumoto, H. Baba, K. Mikawa, T. Sueno, and M. Toda, “New Multi-Microprocessor Control System of the Main Ring Magnet  Power Supply for the KEK 12 GeV  PS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 689-692. 
[n]	D. L. Bruhwiler and M. F. Reusch, “The Effect of Various Particle Distribution Functions on the Modeling of Space Charge Effects in a High-Order Optics Code”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1168-1171. 
[n]	G. Swain, M. Burns, and P. Busch, “Generating Catalogs of Transverse Matching Solutions”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 598-601. 
[n]	F. Z. Chen, L. W. Lai, Y. B. Leng, N. Zhang, and Y. B. Yan, “Development of a Digital Beam Signal Processor Test System Based on MATLAB and SCPI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 329-331. doi:10.18429/JACoW-IPAC2017-MOPAB089
[n]	G. E. Leyh, “A Critical Analysis of IGBT Geometries, with the Intention of Mitigating Undesirable Destruction Caused by Fault Scenarios of an Adverse Nature”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE041, pp. 1174-1176. 
[n]	M. Schaumann et al., “First Partially Stripped Ions in the LHC (208Pb????)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 689-692. doi:10.18429/JACoW-IPAC2019-MOPRB055
[n]	M. E. Biagini et al., “PSPA, a Web Platform for Simulation of Particle Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3730-3733. doi:10.18429/JACoW-IPAC2017-THPAB019
[n]	E. Oponowicz, L. Bottura, Y. Dutheil, A. Gerbershagen, and A. Haziot, “Study of Coil Configuration and Local Optics Effects for the GaToroid Ion Gantry Design”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2984-2987. doi:10.18429/JACoW-IPAC2022-THPOMS018
[n]	D. C. Hagerman, “Los Alamos Meson Factory: Present Status and Future Plans”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-002, pp. XX-XX. 
[n]	M. Fukuda et al., “Design Studies of the K900 JAERI Superconducting AVF Cyclotron for the Research in Biotechnology and Materials Science”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-11, pp. XX-XX. 
[n]	M. E. Angoletta et al., “A Leading-Edge Hardware Family for Diagnostics Applications and Low-Level RF in CERN's ELENA Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF28, pp. 575-578. 
[n]	J. D. Jarvis et al., “Pulsed Uniformity Conditioning and Emittance Measurements of Diamond Field-emitter Arrays”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC61, pp. 379-382. 
[n]	T. Chanwattana et al., “Design of an upgraded screen monitor system for the Siam Photon Source injector linac”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 540-543. doi:10.18429/JACoW-IBIC2025-TUPMO29
[n]	A. Schempp, H. Klein, K. H. Pape, P. Schastok, and S. H. Wang, “The HERA RFQ”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 361-364. 
[n]	J. Gareyte, “Impedances: Measurements and Calculations for Non-symmetric Structures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEZGB003, pp. 89-93. 
[n]	J. H. Shao et al., “Laser Triggered RF Breakdown Study Using an S-band Photocathode Gun”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3943-3945. doi:10.18429/JACoW-IPAC2014-THPRI076

For LaTeX

Use Complete Form

For BibTeX

References

Back to search