Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. J. Ruisard et al., “Tuning Low-Current Beam for Nonlinear Quasi-Integrable Optics Experiments at the University of Maryland Electron Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3585-3588. doi:10.18429/JACoW-IPAC2018-THPAK143
[n] J. S. Ellison and P. Snopok, “Beam-Plasma Effects in Muon Ionization Cooling Lattices”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2649-2651. doi:10.18429/JACoW-IPAC2015-WEPWA063
[n] W. J. Corbett, J. A. Safranek, and A. Terebilo, “Initial Scraper Measurements in SPEAR 3”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper RPAT081, unpublished.
[n] K. C. Mittal et al., “High Power Electron Accelerator Programme at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP005, pp. 58-60.
[n] T.-S. Ueng, J.-C. Chang, C. K. Kuan, and Y.-C. Lin, “The Ground Testing of TPS Ground System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS062, pp. 1677-1679.
[n] H. Kleines et al., “The Control and Data Acquisition System of the Neutron Instrument BIODIFF”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU020, pp. 477-479.
[n] A. Aulin S?Âderqvist, N. Claesson, J. Neves Rodrigues, J. Dedic, R. Stefanic, and R. Tavcar, “Comparison of Synchronization Layers for Design of Timing Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC102, pp. 1296-1299.
[n] N. Huang, H. X. Deng, B. Liu, and D. Wang, “Physical Design and FEL Performance Study for FEL-III Beamline of SHINE”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 199-202. doi:10.18429/JACoW-FEL2019-TUP063
[n] H. R. Froelich, “Design of a Shuttle Microtron for Radiation Therapy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1022-1025.
[n] N. Hiller et al., “Observation of Bunch Deformation at the ANKA Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA020, pp. 2523-2525.
[n] Q. W. Chu, H. Guo, S. C. Huang, A. D. Wu, and Z. M. You, “The Mechanism of Electropolishing of Niobium from Choline Chloride-based Deep Eutectic Solvents”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 852-856. doi:10.18429/JACoW-SRF2019-THP010
[n] W. H. C. Theuws, F. F. de Wit, J. I. M. Botman, A. F. J. Hammen, S. R. Weijers, and M. Weiss, “A Tuning Procedure for a Racetrack Microtron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP44, pp. 759-761.
[n] S. B. Vorozhtsov, “FINAL SHAPING OF THE MAGNETIC STRUCTURE OF THE VINCY CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P14, pp. XX-XX.
[n] D. Dinev, “ORBIT - 3.0 - A Computer Code for Simulation and Correction of the Closed Orbit and First Turn in Synchrotrons”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A18, pp. 1369-1371.
[n] E. N. Svystun, R. W. A?ƒmann, U. Dorda, and B. Marchetti, “The Effect of the Transverse Beam Jitter on the Accelerated Electron Beam Quality in a Laser-Driven Plasma Accelerator with External Injection at SINBAD for ATHENAe”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3624-3627. doi:10.18429/JACoW-IPAC2019-THPGW022
[n] F. Gao, R. B. Deng, Z. Jiang, S. Xiang, L. Yin, and S. K. Sharma, “Hammerhead Support Design and Application at SSRF”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 60-62. doi:10.18429/JACoW-MEDSI2018-TUPH16
[n] S. Khan, “Storage Ring Fill Patterns for Femtoslicing Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE034, pp. 2327-2329.
[n] Y. Chao, P. Corredoura, T. Limberg, H. Schwarz, and P. Wilson, “A Feedback for Longitudinal Instabilities in the SLC Damping Rings”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1806-1809.
[n] L. R. Evans and D. J. Warner, “Real-Time Measurements of Proton Bunch Form”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P09, pp. 349-355.
[n] R. Bartolini et al., “Novel Lattice Upgrade Studies for Diamond Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA068, pp. 240-242.
[n] Y. Shimosaki et al., “Status of the Induction Acceleration System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN050, pp. 1502-1504.
[n] A. Jakob, H. Klein, A. Lakatos, O. Meusel, and J. Pozimski, “Non Destructive Determination of Beam Emittance for Low Energy Ion Beams using CCD Camera Measurements”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B07, pp. 1800-1802.
[n] F. V. Hartemann et al., “Overview of Mono-energetic Gamma-ray Sources & Applications”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD098, pp. 2129-2131.
[n] W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 688-690. doi:10.18429/JACoW-LINAC2018-THPO006
[n] D. J. Scott, “Magnet Block Sorting for Variably Polarising Undulators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF065, pp. 461-463.
[n] P. Kuske, “Longitudinal Stability Of Short Bunches in Storage Rings with Strong Longitudinal Focusing”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 135-137. doi:10.18429/JACoW-IPAC2015-MOPWA020
[n] J. Bigolas, M. Pachan, E. Plawski, J. Pszona, and A. Wysocka, “4 kW, 25keV Power Electron Source for Studies of Thermal Beam Effects”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2653-2655.
[n] J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313.
[n] S. Stark, G. Bisoffi, V. Palmieri, and A. M. Porcellato, “New RF Measuring System for Cavity Characterization”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT060, pp. 692-694.
[n] J. J. Song, K. C. Harkay, Y. W. Kang, R. L. Kustom, and A. Nassiri, “Higher-Order Modes of Storage Ring RF Cavities and Their Interaction with the Beam at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P030, pp. 2944-2946.
[n] T. H. Luo et al., “RF Design of APEX2 Cavities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2094-2097. doi:10.18429/JACoW-IPAC2019-TUPTS076
[n] S. C. Huang, Q. W. Chu, Y. He, C. L. Li, A. D. Wu, and S. X. Zhang, “The Effect of Helium Processing and Plasma Cleaning for Low Beta HWR Cavity”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1228-1230. doi:10.18429/JACoW-SRF2019-FRCAB6
[n] J. Guo et al., “Pulsed Operation of CEBAF for JLEIC Injection”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 682-684. doi:10.18429/JACoW-LINAC2018-THPO004
[n] H. Oguri, “Power Upgrade of J-PARC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEYB101, pp. 2047-2051.
[n] F. Cioeta et al., “A Numerical Analysis to Choose the Most Performing Optical Transition Radiation Screen”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2518-2521. doi:10.18429/JACoW-IPAC2019-WEPGW022
[n] ?ç. Kaya, A. Aksoy, ?û. F. El?ºim, ?û. Karsl, and B. Ko?º, “Superconducting RF Modules of TARLA”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 900-904. doi:10.18429/JACoW-SRF2019-THP028
[n] K. Soong, R. J. England, Z. Wu, R. L. Byer, and E. A. Peralta, “Beam Position Monitor for Micro-Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC32, pp. 138-140.
[n] S. V. Matsievskiy and V. I. Kaminskiy, “Traveling Wave Accelerating Structure Power Input Calculation With Equivalent Circuit Method”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 864-866. doi:10.18429/JACoW-LINAC2016-THPLR011
[n] R. J. Briggs, “High Current Electron Linacs (Advanced Test Accelerator/Experimental Test Accelerator)”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRE0008, pp. 507-510.
[n] M. Kago et al., “System Design of Accelerator Safety Interlock for the XFEL/SPring-8”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB060, pp. 2827-2829.
[n] D. Reschke et al., “Results on Large Grain Nine-Cell Cavities at DESY: Gradients up to 45 MV/m after Electropolishing”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO046, pp. 490-494.
[n] T. Nakamura et al., “Laser Acceleration of Negative Ions by Coulomb Implosion Mechanism”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA059, pp. 211-213.
[n] R. Bailey et al., “LEP Energy Calibration”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1765-1768.
[n] A. K. Mitra, R. E. Laxdal, R. Poirier, and K. Fong, “HFSS Computation of Frequency Sensitivity of ISAC-II Medium Beta Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP22, pp. 339-341.
[n] W. Beeckman et al., “Machining And Assembly Of The Iba C70 Cyclotron Magnet”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 81-83.
[n] B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
[n] X. Buffat, G. J. Müller, S. Redaelli, and M. Strzelczyk, “Simulation of Linear Beam Parameters to Minimize the Duration of the Squeeze at the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ030, pp. 1873-1875.
[n] R. Duperrier et al., “Beam Dynamics Studies in SPIRAL II Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB034, pp. 2802-2804.
[n] E. R. Harms et al., “Third Harmonic System at Fermilab/FLASH”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper MOOBAU01, pp. 11-16.
[n] S. Mitsunobu et al., “Activities of Superconducting Cavities for KEK B-Factory”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A08, pp. 47-49.
[n] I. V. Gonin, E. R. Harms, T. N. Khabiboulline, N. Solyak, and V. P. Yakovlev, “Thermal-Mechanical Study of 3.9 GHz CW Coupler and Cavity for LCLS-II Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 171-173. doi:10.18429/JACoW-LINAC2016-MOPLR015
[n] H. Lee, M.-H. Cho, S. H. Kim, C. H. Yi, W. Namkung, and C. D. Park, “Vacuum Performance Simulation of C-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS014, pp. 1548-1550.
[n] D. Kayran et al., “Status of High Current R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP006, pp. 2148-2150.
[n] J. P. Wozniak, G. Kruk, and M. Polnik, “Groovy as Domain-specific Language (DSL) in Software Interlock System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC142, pp. 443-445.
[n] A. Andersson et al., “Electron Beam Characterization by Undulator Radiation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05J, pp. 1635-1637.
[n] V. A. Volodin and A. O. Hanson, “On Beam Blowup in a Racetrack Microtron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1194-1197.
[n] J. T. M. Lyles et al., “Results from the Installation of a New 201 MHz RF System at LANSCE”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP107, pp. 303-306.
[n] K. N. Sanosyan, M. Ivanyan, and R. Mikaelyan, “Radiation Safety Considerations for CANDLE Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE078, pp. 2667-2669.
[n] A. G. Lee et al., “137 kW HV Modulator for Ion Injector”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B09, pp. 2373-2375.
[n] B. Marchetti, A. Bacci, E. Chiadroni, M. Ferrario, R. Pompili, and A. Cianchi, “Compression of Train of Bunches with Ramped Intensity Profile at SPARC_LAB”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1476-1478. doi:10.18429/JACoW-IPAC2015-TUPWA031
[n] J. G. Alessi, J. M. Brennan, A. Kponou, V. LoDestro, and P. A. Montemurro, “The BNL 200 MeV H- Linac - Performance and Upgrades”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH432, pp. 674-676.
[n] C. M. S. Sears et al., “Demonstration of Optical Microbunching and Net Acceleration at 0.8 microns”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXKI02, pp. 1894-1898.
[n] M. E. Biagini et al., “Positron Driven Muon Source for a Muon Collider: Recent Developments”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 49-52. doi:10.18429/JACoW-IPAC2019-MOZZPLS2
[n] E. Wallén, R. Kuravi, S. Marks, and C. Myers, “Magnetic measurements of the ALS-U magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3650-3652. doi:10.18429/JACoW-IPAC2023-WEPM041
[n] S. J. Pasky et al., “A New SLED Test Stand in the APS Injector Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP003, pp. 806-808.
[n] B. Goddard et al., “Beam Halo on the LHC TCDQ Diluter System and Thermal Load on the Downstream Superconducting Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS008, pp. 547-549.
[n] H. Hanaki, H. Dewa, S. Suzuki, K. Yanagida, T. Asaka, and T. Ohshima, “Evaluation of Beam Energy Fluctuations Caused by Phase Noises”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP093, pp. 273-275.
[n] W. T. Weng, H. Brown, J. Claus, H. Foelsche, Y. Y. Lee, and E. Raka, “Beam Transfer from the AGS to ISABELLE”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3549-3552.
[n] D. Robin, Z. K. Fisher, G. C. Pappas, and C. Sun, “Pulsed Multipole Injection for the ALS Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA068, pp. 2642-2644.
[n] R. K. Reece et al., “First Results of Proton Injection Commissioning of the AGS Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 839-842.
[n] A. Nadji et al., “Orbit Correction and Feedback Systems on the Storage Rings DCI and Super-ACO”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1571-1574.
[n] C. L. Li et al., “Second Order Intensity Correlation and Statistical Properties of a Soft X-Ray Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1788-1791. doi:10.18429/JACoW-IPAC2019-TUPRB046
[n] S. Khan et al., “Status of the Optical Replica Synthesizer at FLASH”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN023, pp. 965-967.
[n] R. T. Sanders et al., “The AGS Booster High Frequency RF System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 681-684.
[n] R. T. Sanders et al., “The AGS Booster Low Frequency RF System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 739-742.
[n] F. B?©dker et al., “Permanent Magnets in Accelerators can save Energy, Space, and Cost”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME001, pp. 3511-3513.
[n] I. S. Park, J. S. Yang, M. Kwon, and I. S. Ko, “Development of a Disk-Type Cavity Input Coupler”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D032, pp. 755-757.
[n] R. E. Laxdal et al., “Initial Operating Experience with the Auxiliary Accelerating Cavity for the TRIUMF Cyclotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 810-813.
[n] Z. Parsa, “Beam Aperture and Emittance Growth in the AGS-Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1170-1173.
[n] D. Angal-Kalinin et al., “Design of Post Linac Beam Transport for the UK New Light Source Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC036, pp. 1802-1804.
[n] R. W. Assmann and F. Zimmermann, “Efficient Collimation and Machine Protection for the Compact Linear Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS092, pp. 768-770.
[n] O. N. Borisov et al., “Beam Extraction System From Dc60 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 24-26.
[n] A. E. Geisler et al., “Commissioning Of The Accel 250 Mev Proton Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 9-14.
[n] Ph. Amstutz and M. Vogt, “Arbitrary Order Perturbation Theory for a Time-Discrete Model of Micro-Bunching Driven by Longitudinal Space Charge”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 596-598. doi:10.18429/JACoW-FEL2019-THP003
For LaTeX
Use Complete Form
For BibTeX
References
- K. J. Ruisard et al., “Tuning Low-Current Beam for Nonlinear Quasi-Integrable Optics Experiments at the University of Maryland Electron Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3585-3588.
- J. S. Ellison and P. Snopok, “Beam-Plasma Effects in Muon Ionization Cooling Lattices”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2649-2651.
- W. J. Corbett, J. A. Safranek, and A. Terebilo, “Initial Scraper Measurements in SPEAR 3”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT081, unpublished.
- K. C. Mittal et al., “High Power Electron Accelerator Programme at BARC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP005, pp. 58-60.
- T.-S. Ueng, J.-C. Chang, C. K. Kuan, and Y.-C. Lin, “The Ground Testing of TPS Ground System”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS062, pp. 1677-1679.
- H. Kleines et al., “The Control and Data Acquisition System of the Neutron Instrument BIODIFF”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU020, pp. 477-479.
- A. Aulin S?Âderqvist, N. Claesson, J. Neves Rodrigues, J. Dedic, R. Stefanic, and R. Tavcar, “Comparison of Synchronization Layers for Design of Timing Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC102, pp. 1296-1299.
- N. Huang, H. X. Deng, B. Liu, and D. Wang, “Physical Design and FEL Performance Study for FEL-III Beamline of SHINE”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 199-202.
- H. R. Froelich, “Design of a Shuttle Microtron for Radiation Therapy”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1022-1025.
- N. Hiller et al., “Observation of Bunch Deformation at the ANKA Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA020, pp. 2523-2525.
- Q. W. Chu, H. Guo, S. C. Huang, A. D. Wu, and Z. M. You, “The Mechanism of Electropolishing of Niobium from Choline Chloride-based Deep Eutectic Solvents”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 852-856.
- W. H. C. Theuws, F. F. de Wit, J. I. M. Botman, A. F. J. Hammen, S. R. Weijers, and M. Weiss, “A Tuning Procedure for a Racetrack Microtron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP44, pp. 759-761.
- S. B. Vorozhtsov, “FINAL SHAPING OF THE MAGNETIC STRUCTURE OF THE VINCY CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P14, pp. XX-XX.
- D. Dinev, “ORBIT - 3.0 - A Computer Code for Simulation and Correction of the Closed Orbit and First Turn in Synchrotrons”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2A18, pp. 1369-1371.
- E. N. Svystun, R. W. A?ƒmann, U. Dorda, and B. Marchetti, “The Effect of the Transverse Beam Jitter on the Accelerated Electron Beam Quality in a Laser-Driven Plasma Accelerator with External Injection at SINBAD for ATHENAe”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3624-3627.
- F. Gao, R. B. Deng, Z. Jiang, S. Xiang, L. Yin, and S. K. Sharma, “Hammerhead Support Design and Application at SSRF”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 60-62.
- S. Khan, “Storage Ring Fill Patterns for Femtoslicing Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE034, pp. 2327-2329.
- Y. Chao, P. Corredoura, T. Limberg, H. Schwarz, and P. Wilson, “A Feedback for Longitudinal Instabilities in the SLC Damping Rings”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1806-1809.
- L. R. Evans and D. J. Warner, “Real-Time Measurements of Proton Bunch Form”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P09, pp. 349-355.
- R. Bartolini et al., “Novel Lattice Upgrade Studies for Diamond Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA068, pp. 240-242.
- Y. Shimosaki et al., “Status of the Induction Acceleration System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN050, pp. 1502-1504.
- A. Jakob, H. Klein, A. Lakatos, O. Meusel, and J. Pozimski, “Non Destructive Determination of Beam Emittance for Low Energy Ion Beams using CCD Camera Measurements”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B07, pp. 1800-1802.
- F. V. Hartemann et al., “Overview of Mono-energetic Gamma-ray Sources & Applications”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD098, pp. 2129-2131.
- W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 688-690.
- D. J. Scott, “Magnet Block Sorting for Variably Polarising Undulators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF065, pp. 461-463.
- P. Kuske, “Longitudinal Stability Of Short Bunches in Storage Rings with Strong Longitudinal Focusing”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 135-137.
- J. Bigolas, M. Pachan, E. Plawski, J. Pszona, and A. Wysocka, “4 kW, 25keV Power Electron Source for Studies of Thermal Beam Effects”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2653-2655.
- J. S. Chai, J. H. Ha, Y. S. Kim, D. S. Ahn, S. B. Hong, and K. H. Kwon, “Beam Transport System Using Fuzzy Controller in the KCCH Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-38, pp. 310-313.
- S. Stark, G. Bisoffi, V. Palmieri, and A. M. Porcellato, “New RF Measuring System for Cavity Characterization”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT060, pp. 692-694.
- J. J. Song, K. C. Harkay, Y. W. Kang, R. L. Kustom, and A. Nassiri, “Higher-Order Modes of Storage Ring RF Cavities and Their Interaction with the Beam at the Advanced Photon Source (APS)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P030, pp. 2944-2946.
- T. H. Luo et al., “RF Design of APEX2 Cavities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2094-2097.
- S. C. Huang, Q. W. Chu, Y. He, C. L. Li, A. D. Wu, and S. X. Zhang, “The Effect of Helium Processing and Plasma Cleaning for Low Beta HWR Cavity”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1228-1230.
- J. Guo et al., “Pulsed Operation of CEBAF for JLEIC Injection”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 682-684.
- H. Oguri, “Power Upgrade of J-PARC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEYB101, pp. 2047-2051.
- F. Cioeta et al., “A Numerical Analysis to Choose the Most Performing Optical Transition Radiation Screen”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2518-2521.
- ?ç. Kaya, A. Aksoy, ?û. F. El?ºim, ?û. Karsl, and B. Ko?º, “Superconducting RF Modules of TARLA”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 900-904.
- K. Soong, R. J. England, Z. Wu, R. L. Byer, and E. A. Peralta, “Beam Position Monitor for Micro-Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC32, pp. 138-140.
- S. V. Matsievskiy and V. I. Kaminskiy, “Traveling Wave Accelerating Structure Power Input Calculation With Equivalent Circuit Method”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 864-866.
- R. J. Briggs, “High Current Electron Linacs (Advanced Test Accelerator/Experimental Test Accelerator)”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRE0008, pp. 507-510.
- M. Kago et al., “System Design of Accelerator Safety Interlock for the XFEL/SPring-8”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB060, pp. 2827-2829.
- D. Reschke et al., “Results on Large Grain Nine-Cell Cavities at DESY: Gradients up to 45 MV/m after Electropolishing”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO046, pp. 490-494.
- T. Nakamura et al., “Laser Acceleration of Negative Ions by Coulomb Implosion Mechanism”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA059, pp. 211-213.
- R. Bailey et al., “LEP Energy Calibration”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1765-1768.
- A. K. Mitra, R. E. Laxdal, R. Poirier, and K. Fong, “HFSS Computation of Frequency Sensitivity of ISAC-II Medium Beta Superconducting Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP22, pp. 339-341.
- W. Beeckman et al., “Machining And Assembly Of The Iba C70 Cyclotron Magnet”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 81-83.
- B. G. Chidley, J. C. Brown, G. E. McMichael, S. O. Schriber, M. R. Shubaly, and J. Ungrin, “Design and Constraints for the ZEBRA Injector, RFQ and DTL”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B06, pp. 49-52.
- X. Buffat, G. J. Müller, S. Redaelli, and M. Strzelczyk, “Simulation of Linear Beam Parameters to Minimize the Duration of the Squeeze at the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ030, pp. 1873-1875.
- R. Duperrier et al., “Beam Dynamics Studies in SPIRAL II Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB034, pp. 2802-2804.
- E. R. Harms et al., “Third Harmonic System at Fermilab/FLASH”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper MOOBAU01, pp. 11-16.
- S. Mitsunobu et al., “Activities of Superconducting Cavities for KEK B-Factory”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95A08, pp. 47-49.
- I. V. Gonin, E. R. Harms, T. N. Khabiboulline, N. Solyak, and V. P. Yakovlev, “Thermal-Mechanical Study of 3.9 GHz CW Coupler and Cavity for LCLS-II Project”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 171-173.
- H. Lee, M.-H. Cho, S. H. Kim, C. H. Yi, W. Namkung, and C. D. Park, “Vacuum Performance Simulation of C-band Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS014, pp. 1548-1550.
- D. Kayran et al., “Status of High Current R&D Energy Recovery Linac at Brookhaven National Laboratory”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP006, pp. 2148-2150.
- J. P. Wozniak, G. Kruk, and M. Polnik, “Groovy as Domain-specific Language (DSL) in Software Interlock System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC142, pp. 443-445.
- A. Andersson et al., “Electron Beam Characterization by Undulator Radiation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05J, pp. 1635-1637.
- V. A. Volodin and A. O. Hanson, “On Beam Blowup in a Racetrack Microtron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1194-1197.
- J. T. M. Lyles et al., “Results from the Installation of a New 201 MHz RF System at LANSCE”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP107, pp. 303-306.
- K. N. Sanosyan, M. Ivanyan, and R. Mikaelyan, “Radiation Safety Considerations for CANDLE Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE078, pp. 2667-2669.
- A. G. Lee et al., “137 kW HV Modulator for Ion Injector”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2B09, pp. 2373-2375.
- B. Marchetti, A. Bacci, E. Chiadroni, M. Ferrario, R. Pompili, and A. Cianchi, “Compression of Train of Bunches with Ramped Intensity Profile at SPARC_LAB”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1476-1478.
- J. G. Alessi, J. M. Brennan, A. Kponou, V. LoDestro, and P. A. Montemurro, “The BNL 200 MeV H- Linac - Performance and Upgrades”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH432, pp. 674-676.
- C. M. S. Sears et al., “Demonstration of Optical Microbunching and Net Acceleration at 0.8 microns”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEXKI02, pp. 1894-1898.
- M. E. Biagini et al., “Positron Driven Muon Source for a Muon Collider: Recent Developments”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 49-52.
- E. Wallén, R. Kuravi, S. Marks, and C. Myers, “Magnetic measurements of the ALS-U magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM041, pp. 3650-3652.
- S. J. Pasky et al., “A New SLED Test Stand in the APS Injector Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP003, pp. 806-808.
- B. Goddard et al., “Beam Halo on the LHC TCDQ Diluter System and Thermal Load on the Downstream Superconducting Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS008, pp. 547-549.
- H. Hanaki, H. Dewa, S. Suzuki, K. Yanagida, T. Asaka, and T. Ohshima, “Evaluation of Beam Energy Fluctuations Caused by Phase Noises”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP093, pp. 273-275.
- W. T. Weng, H. Brown, J. Claus, H. Foelsche, Y. Y. Lee, and E. Raka, “Beam Transfer from the AGS to ISABELLE”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3549-3552.
- D. Robin, Z. K. Fisher, G. C. Pappas, and C. Sun, “Pulsed Multipole Injection for the ALS Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA068, pp. 2642-2644.
- R. K. Reece et al., “First Results of Proton Injection Commissioning of the AGS Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 839-842.
- A. Nadji et al., “Orbit Correction and Feedback Systems on the Storage Rings DCI and Super-ACO”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1571-1574.
- C. L. Li et al., “Second Order Intensity Correlation and Statistical Properties of a Soft X-Ray Free Electron Laser”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1788-1791.
- S. Khan et al., “Status of the Optical Replica Synthesizer at FLASH”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN023, pp. 965-967.
- R. T. Sanders et al., “The AGS Booster High Frequency RF System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 681-684.
- R. T. Sanders et al., “The AGS Booster Low Frequency RF System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 739-742.
- F. B?©dker et al., “Permanent Magnets in Accelerators can save Energy, Space, and Cost”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME001, pp. 3511-3513.
- I. S. Park, J. S. Yang, M. Kwon, and I. S. Ko, “Development of a Disk-Type Cavity Input Coupler”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D032, pp. 755-757.
- R. E. Laxdal et al., “Initial Operating Experience with the Auxiliary Accelerating Cavity for the TRIUMF Cyclotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 810-813.
- Z. Parsa, “Beam Aperture and Emittance Growth in the AGS-Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1170-1173.
- D. Angal-Kalinin et al., “Design of Post Linac Beam Transport for the UK New Light Source Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC036, pp. 1802-1804.
- R. W. Assmann and F. Zimmermann, “Efficient Collimation and Machine Protection for the Compact Linear Collider”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS092, pp. 768-770.
- O. N. Borisov et al., “Beam Extraction System From Dc60 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 24-26.
- A. E. Geisler et al., “Commissioning Of The Accel 250 Mev Proton Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 9-14.
- Ph. Amstutz and M. Vogt, “Arbitrary Order Perturbation Theory for a Time-Discrete Model of Micro-Bunching Driven by Longitudinal Space Charge”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 596-598.
Back to search