Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. F. Parker, N. Q. Sesol, and R. E. Timm, “Operating Results and Improvements on the Zero Gradient Synchrotron (ZGS) Polarized Proton Ion Source”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1718-1722.
[n] S. Kuroguchi et al., “Harnessing machine learning for the optimal design of ILC e-driven positron source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 886-888. doi:10.18429/JACoW-IPAC2024-MOPS69
[n] A. Ratkus et al., “Initial high electric field – vacuum arc breakdown test results for additively manufactured pure copper electrodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4957-4959. doi:10.18429/JACoW-IPAC2023-THPM030
[n] L. H. Harwood and D. Johnson, “A Model for Calculating in Two Dimensions a Magnet with Repetitive Structure in the Third Dimension”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B22, pp. 99-100.
[n] F. J. Saura Esteban et al., “Muon Collider Graphite Target Studies and Demonstrator Layout Possibilities at CERN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2895-2898. doi:10.18429/JACoW-IPAC2022-THPOTK052
[n] T. Kikuchi et al., “Numerical Study on Simultaneous Use of Stochastic Cooling and Electron Cooling with Internal Target at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD070, pp. 852-854.
[n] H. Podlech et al., “The MYRRHA Project”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 945-950. doi:10.18429/JACoW-NAPAC2019-THZBA2
[n] M. Turenne, F. Hunte, R. P. Johnson, S. A. Kahn, J. Schwartz, and L. Ye, “Characterization of REBCO Coated Conductors for High Field Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB058, pp. 400-402.
[n] M. J. P. Adam and N. Appathurai, “Evaluation of Anisotropic Simulations & Redesign of the BXDS High Energy Monochromator Bent Laue Diffraction Crystal Holders”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 199-201. doi:10.18429/JACoW-MEDSI2018-WEPH01
[n] R. M. Hutcheon, “An Equivalent Circuit Model of the General 3-Dimensional RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3524-3527.
[n] C. Xu, E. Br??ndermann, A.-S. M??ller, A. Santamaria Garcia, M. Schwarz, and J. Sch?ñfer, “Optimization Studies of Simulated THz Radiation at FLUTE”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2292-2295. doi:10.18429/JACoW-IPAC2022-WEPOMS023
[n] R. Lujan and K. Christensen, “Application of Precision Mechanical Engineering Techniques to the Design of a Moderate Energy Beam Transport for the FAA Explosive Detection System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2947-2950.
[n] M. Bertucci et al., “Status of LASA-INFN R&D Activity on PIP-II Low-beta Prototypes”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1241-1244. doi:10.18429/JACoW-IPAC2022-TUPOTK020
[n] C. Hsu, G. H. Luo, and K. T. Hsu, “Recent Developments on Beam Observations at SRRC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA153, pp. 2220-2222.
[n] R. W. Mueller and R. C. Arnold, “Basic Features of a Reactor Driver Concept for Indirect Drive”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1731-1734.
[n] X. Hu, L. Yin, and Q. G. Zhou, “The Design of Dual Canted In-vacuum Undulators at SSRF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC167, pp. 3287-3289.
[n] C. Salgado-L??pez et al., “Angular-Resolved Thomson Parabola Spectrometer for Laser-Driven Ion Accelerators”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 352-356. doi:10.18429/JACoW-IBIC2022-TU3C2
[n] J. Sachtschale, P. G. O, and G. Swift, “Thirty Mega-Watt Klystron Modulator Development at the Duke University Free-Electron Laser Laboratory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P082, pp. 1278-1280.
[n] P. N. Ostroumov et al., “High-Power Test of a 57-MHz CW RFQ”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP079, pp. 767-769.
[n] J. Keane et al., “NSLS RF System Improvements”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2784-2786.
[n] R. A. Kostin et al., “A New Design of a Dressed Balloon Cavity with Superior Mechanical Properties”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1769-1772. doi:10.18429/JACoW-IPAC2021-TUPAB166
[n] Z. Zhang, J. P. Duris, Z. Huang, J. P. MacArthur, and A. Marinelli, “Attosecond Pulses and Advanced Techniques Planned for LCLS-II”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper TUYBA6, unpublished.
[n] M. Herrmann et al., “Detuning estimation for a doubly-fed normal-conducting gun”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6148, unpublished.
[n] J. Breunlin and G. Felcsuti, “Beam Stability in the MAX IV 3 GeV Storage Ring”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 370-373. doi:10.18429/JACoW-IBIC2022-WE2C2
[n] L. Zambon, A. Apollonio, and R. Passuello, “Touch-Screen Web Interfaces”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 591-594. doi:10.18429/JACoW-ICALEPCS2023-TUPDP036
[n] L. Onischenko, N. Shakun, and P. Shishlyannikov, “Beam Lifetime in the JINR Phasotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-28, pp. 273-275.
[n] A. Schempp and P. Fischer, “Tuning a CW 4-Rod RFQ”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP064, pp. 728-730.
[n] A. A. Gorzawski, J. P. S. Martins, and N. Milas, “EPICS NTTables for Machine Timing Configuration”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 767-771. doi:10.18429/JACoW-ICALEPCS2023-TUPDP094
[n] N. Vafaei-Najafabadi and L. D. Amorim, “Beam Induced Ionization Injection of Shaped Electron Bunches”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEYBA4, unpublished.
[n] M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3729-3731. doi:10.18429/JACoW-IPAC2018-THPAL040
[n] T. A. Pelaia, “XAL Application Framework and Bricks GUI Builder”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA09, pp. 105-107.
[n] D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
[n] J. Liu, H. B. Chen, J. Shi, X. W. Wu, and H. Zha, “Development of a High-Power X-Band RF Rotary Joint”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4224-4226. doi:10.18429/JACoW-IPAC2017-THPIK057
[n] L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Study of Integrable and Quasi-Integrable Sextupole Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 371-374. doi:10.18429/JACoW-IPAC2019-MOPGW107
[n] Y. M. Zhang, Y. J. Pei, L. S. Sheng, and Y. Song, “Research of L-Band Disk-Loaded Waveguides Travelling Wave Accelerating Structures for a High Power Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1506-1508. doi:10.18429/JACoW-IPAC2017-TUPAB082
[n] B. Beutner, “European XFEL Injector Commissioning Results”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 389-393. doi:10.18429/JACoW-FEL2017-WEA01
[n] J. Wei et al., “Real-World Sorting of RHIC Superconducting Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP95, pp. 3176-3178.
[n] M. Y. Huang et al., “Study on the Important Technologies of 300MeV Upgrade for the CSNS Injection System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3089-3092. doi:10.18429/JACoW-IPAC2021-WEPAB199
[n] N. Hosoda, H. Maesaka, T. Ohata, T. Ohshima, and Y. Otake, “SCSS Prototype Accelerator Timing System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA035, pp. 154-156.
[n] U. Wienands et al., “High-temperature Kicker Electrodes for High-beam-current Operation of PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT163, pp. 2843-2845.
[n] M. Delrieux et al., “Production of slow extracted beams for CERN's East Area at the Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 275-278. doi:10.18429/JACoW-IPAC2023-MOPA099
[n] H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
[n] H.-J. Tsai, H.-P. Chang, P. J. Chou, C.-C. Kuo, G.-H. Luo, and M.-H. Wang, “Correction of Vertical Dispersion and Betatron Coupling for the TPS Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH050, pp. 2032-2034.
[n] M. Kay, C. Taylor, and P. M. Anisimov, “H- Bunch Shape Measurements at LANSCE”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 619-623. doi:10.18429/JACoW-IBIC2025-WEPCO04
[n] R. L. Schwartz, R. E. Ebrahim, and P. J. Pretorius, “AVN Radio Telescope Conversion Software Systems”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 661-665. doi:10.18429/JACoW-ICALEPCS2023-TUPDP069
[n] C. Welsch, “Physics of Star Wars”, presented at the IPAC'23, Venice, Italy, May 2023, paper THGOR1, unpublished.
[n] S.-C. Kim, J. Choi, K. M. Ha, and J. Y. Huang, “LC Filter for High Accuracy and Stability Digital MPS at PLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE061, pp. 3550-3552.
[n] S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n] G. Huang, D. Jia, K. Jin, H. Lin, and Y. Liu, “LLRF System Improvement for HLS Linac Upgrade”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB020, pp. 213-215.
[n] W. Chou et al., “The Design of a $gamma_t$-Jump System for the FNAL Main Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W015, pp. 994-996.
[n] M. F. Piller, M. Champion, M. T. Crofford, L. R. Doolittle, and H. Ma, “The Spallation Neutron Source RF Reference System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT062, pp. 3573-3575.
[n] M. M. Dehler, S. Bettoni, B. Beutner, and G. De Michele, “Wake Field Monitors in a Multi Purpose X Band Accelerating Structure”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEBL3, pp. 634-637.
[n] J. Yap, A. Steinberg, H. Norman, R. Appleby, and S. Sheehy, “Progress toward TURBO: a novel beam delivery system for charged particle therapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5087-5090. doi:10.18429/JACoW-IPAC2023-THPM091
[n] A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “Isochronous Bend for a High Gain Ring FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS45, pp. XX-XX.
[n] J. Y. Yoon et al., “Design Study of 325MHz RF Power Coupler for Superconducting Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2937-2939. doi:10.18429/JACoW-IPAC2019-WEPRB056
[n] D. I. Mendenhall and R. A. Winje, “The National Accelerator Laboratory Linear Accelerator Radio-Frequency System”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-4, pp. 515-539.
[n] K. Yamada et al., “Successful Beam Commissioning of Heavy-Ion Superconducting Linac at RIKEN”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 167. doi:10.18429/JACoW-SRF2021-MOOFAV01
[n] M. Moisieienko, O. Bezditko, I. M. Karnaukhov, A. Mytsykov, and A. Y. Zelinsky, “NSC KIPT Experience in Use of Laser Tracker Leica at 401 in Equipment Alignment of 100 MeV/100 KW Electron Linear Accelerator of Neutron Source Driver”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4604-4606. doi:10.18429/JACoW-IPAC2017-THPVA069
[n] S. Henderson, R. Littauer, B. McDaniel, T. Pelaia, R. Talman, and E. Young, “Investigation of Chromaticity Sharing at the Cornell Electron Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V037, pp. 1472-1474.
[n] S. Vrcic, J. Engelbrecht, and T. Juerges, “SKA control system in 2025”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 910-915. doi:10.18429/JACoW-ICALEPCS2025-WEMG002
[n] A. Bogacz et al., “Transport of 12 GeV positron beams at Ce+BAF”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1067-1071. doi:10.18429/JACoW-NAPAC2025-THP056
[n] T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
[n] E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1215-1218.
[n] S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz Pulsed Klystron for the Spallation Neutron Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE119, pp. 2323-2325.
[n] A. Furman, “RAMPRF: A Program for Synchronous Acceleration”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 300-303.
[n] F. Sottocorona, D. Garzella, E. Allaria, G. De Ninno, L. Giannessi, and P. Rebernik Ribic, “Sensitivity studies of a seeded FEL operating at 2 nm”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL036, unpublished.
[n] B. Podobedov et al., “Single Micron Single-Bunch Turn-by-Turn BPM Resolution Achieved at NSLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2095-2098. doi:10.18429/JACoW-IPAC2016-WEOBB01
[n] V. Kamerdzhiev and J. Dietrich Forschungszentrum J??lich, “Ionisation Beam Profile Monitor at the Cooler Synchrotron COSY-J??lich”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM19, pp. XX-XX.
[n] L. E. Juergensen et al., “A High-Energy-Scrapersystem for the S-DALINAC Extraction - Design and Installation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 101-104. doi:10.18429/JACoW-IPAC2016-MOPMB012
[n] Y.-C. Chen, R. Agustsson, O. Chimalpopoca, and A. Schillaci, “Finalizing the multiphysics design of a high heat-load superconducting undulator”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1322-1325. doi:10.18429/JACoW-IPAC2025-TUPM071
[n] P. Kolb, “SRF coaxial resonators for hadron acceleration”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 847-852. doi:10.18429/JACoW-LINAC2024-FRXA003
[n] M. H. Rashid, R. K. Bhandari, and C. Mallik, “Potential Forms for Electrostatic and Magnetic Cylindrical Lens and Tracking of Charged Particle”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD087, pp. 4488-4490.
[n] L. Malina, J. M. Coello de Portugal, J. Dilly, P. K. Skowronski, R. Tomas, and M. S. Toplis, “Performance Optimisation of Turn-by-Turn Beam Position Monitor Data Harmonic Analysis”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3064-3067. doi:10.18429/JACoW-IPAC2018-THPAF045
[n] N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2239-2242. doi:10.18429/JACoW-IPAC2018-WEPAL034
[n] C. Schoemers et al., “Beam properties beyond the therapeutic range at HIT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5042-5045. doi:10.18429/JACoW-IPAC2023-THPM064
[n] G. Penn et al., “The Impact of Short-Range Wakes on Injection Into the ALS-U Accumulator Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 429-431. doi:10.18429/JACoW-IPAC2021-MOPAB118
[n] F. Martins et al., “Control System of Upgraded High Voltage for Atlas Tile Calorimeter”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 443-446. doi:10.18429/JACoW-ICALEPCS2021-TUPV025
[n] J. Bergl et al., “Embedded Controllers, Field Bus and a Modular IO Concept: Central Elements of BESSY II Controls”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P022, pp. 2493-2495.
[n] M. Akemoto and S. Takeda, “Development of an X-Band Klystron Modulator with a Pulse-Forming Line and Magnetic Switch”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-28, pp. 374-376.
[n] A. Chanc?® and J. Payet, “The Beta-beam Decay Ring Design”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH008, pp. 1933-1935.
[n] C. Matejcek, “5 MeV Beam Transport System for MESA”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA020, unpublished.
[n] M. Velloso, X. Resende, and F. H. de Sá, “Application of the nonlinear optics from off-energy orbits method at the SIRIUS Storage Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5303, unpublished.
[n] S. Singh, “Particle injection and acceleration in laser wakefield generated via propagation of two laser pulses”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC31, unpublished.
[n] A. Ueno et al., “First Operation of a 432-MHz, 3-MeV RFQ Stabilized with PISLs (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-47, pp. 166-168.
[n] J. Z. Zhou, R. Bhatt, and C. Chen, “Cold-Fluid Equilibrium of a Large-Aspect-Ratio Ellipse-Shaped Charged-Particle Beam in a Non-Axisymmetric Periodic Permanent Magnet Focusing Field”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT003, pp. 853-855.
[n] T. Y. Kim, K. C. Lee, S. J. Noh, and K. H. Chung, “Feasibility Study on Energy Recovery System in 1 MW CW Klystron for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D018, pp. 121-123.
For LaTeX
Use Complete Form
For BibTeX
References
- E. F. Parker, N. Q. Sesol, and R. E. Timm, “Operating Results and Improvements on the Zero Gradient Synchrotron (ZGS) Polarized Proton Ion Source”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1718-1722.
- S. Kuroguchi et al., “Harnessing machine learning for the optimal design of ILC e-driven positron source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS69, pp. 886-888.
- A. Ratkus et al., “Initial high electric field – vacuum arc breakdown test results for additively manufactured pure copper electrodes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM030, pp. 4957-4959.
- L. H. Harwood and D. Johnson, “A Model for Calculating in Two Dimensions a Magnet with Repetitive Structure in the Third Dimension”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B22, pp. 99-100.
- F. J. Saura Esteban et al., “Muon Collider Graphite Target Studies and Demonstrator Layout Possibilities at CERN”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2895-2898.
- T. Kikuchi et al., “Numerical Study on Simultaneous Use of Stochastic Cooling and Electron Cooling with Internal Target at COSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD070, pp. 852-854.
- H. Podlech et al., “The MYRRHA Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 945-950.
- M. Turenne, F. Hunte, R. P. Johnson, S. A. Kahn, J. Schwartz, and L. Ye, “Characterization of REBCO Coated Conductors for High Field Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB058, pp. 400-402.
- M. J. P. Adam and N. Appathurai, “Evaluation of Anisotropic Simulations & Redesign of the BXDS High Energy Monochromator Bent Laue Diffraction Crystal Holders”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 199-201.
- R. M. Hutcheon, “An Equivalent Circuit Model of the General 3-Dimensional RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3524-3527.
- C. Xu, E. Br??ndermann, A.-S. M??ller, A. Santamaria Garcia, M. Schwarz, and J. Sch?ñfer, “Optimization Studies of Simulated THz Radiation at FLUTE”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2292-2295.
- R. Lujan and K. Christensen, “Application of Precision Mechanical Engineering Techniques to the Design of a Moderate Energy Beam Transport for the FAA Explosive Detection System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2947-2950.
- M. Bertucci et al., “Status of LASA-INFN R&D Activity on PIP-II Low-beta Prototypes”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1241-1244.
- C. Hsu, G. H. Luo, and K. T. Hsu, “Recent Developments on Beam Observations at SRRC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA153, pp. 2220-2222.
- R. W. Mueller and R. C. Arnold, “Basic Features of a Reactor Driver Concept for Indirect Drive”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1731-1734.
- X. Hu, L. Yin, and Q. G. Zhou, “The Design of Dual Canted In-vacuum Undulators at SSRF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC167, pp. 3287-3289.
- C. Salgado-L??pez et al., “Angular-Resolved Thomson Parabola Spectrometer for Laser-Driven Ion Accelerators”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 352-356.
- J. Sachtschale, P. G. O, and G. Swift, “Thirty Mega-Watt Klystron Modulator Development at the Duke University Free-Electron Laser Laboratory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P082, pp. 1278-1280.
- P. N. Ostroumov et al., “High-Power Test of a 57-MHz CW RFQ”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP079, pp. 767-769.
- J. Keane et al., “NSLS RF System Improvements”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2784-2786.
- R. A. Kostin et al., “A New Design of a Dressed Balloon Cavity with Superior Mechanical Properties”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1769-1772.
- Z. Zhang, J. P. Duris, Z. Huang, J. P. MacArthur, and A. Marinelli, “Attosecond Pulses and Advanced Techniques Planned for LCLS-II”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper TUYBA6, unpublished.
- M. Herrmann et al., “Detuning estimation for a doubly-fed normal-conducting gun”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6148, this conference.
- J. Breunlin and G. Felcsuti, “Beam Stability in the MAX IV 3 GeV Storage Ring”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 370-373.
- L. Zambon, A. Apollonio, and R. Passuello, “Touch-Screen Web Interfaces”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP036, pp. 591-594.
- L. Onischenko, N. Shakun, and P. Shishlyannikov, “Beam Lifetime in the JINR Phasotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-28, pp. 273-275.
- A. Schempp and P. Fischer, “Tuning a CW 4-Rod RFQ”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP064, pp. 728-730.
- A. A. Gorzawski, J. P. S. Martins, and N. Milas, “EPICS NTTables for Machine Timing Configuration”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP094, pp. 767-771.
- N. Vafaei-Najafabadi and L. D. Amorim, “Beam Induced Ionization Injection of Shaped Electron Bunches”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEYBA4, unpublished.
- M. L. Neubauer, A. Dudas, and F. Marhauser, “Lossy Beam Pipe HOM Load Ceramics with DC Conductivity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3729-3731.
- T. A. Pelaia, “XAL Application Framework and Bricks GUI Builder”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA09, pp. 105-107.
- D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
- J. Liu, H. B. Chen, J. Shi, X. W. Wu, and H. Zha, “Development of a High-Power X-Band RF Rotary Joint”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4224-4226.
- L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Study of Integrable and Quasi-Integrable Sextupole Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 371-374.
- Y. M. Zhang, Y. J. Pei, L. S. Sheng, and Y. Song, “Research of L-Band Disk-Loaded Waveguides Travelling Wave Accelerating Structures for a High Power Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1506-1508.
- B. Beutner, “European XFEL Injector Commissioning Results”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 389-393.
- J. Wei et al., “Real-World Sorting of RHIC Superconducting Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP95, pp. 3176-3178.
- M. Y. Huang et al., “Study on the Important Technologies of 300MeV Upgrade for the CSNS Injection System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3089-3092.
- N. Hosoda, H. Maesaka, T. Ohata, T. Ohshima, and Y. Otake, “SCSS Prototype Accelerator Timing System”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA035, pp. 154-156.
- U. Wienands et al., “High-temperature Kicker Electrodes for High-beam-current Operation of PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT163, pp. 2843-2845.
- M. Delrieux et al., “Production of slow extracted beams for CERN's East Area at the Proton Synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA099, pp. 275-278.
- H. E. Ahn, Y. S. Cho, and B. H. Choi, “Partial Beam Extraction Scheme of Negative Hydrogen Ion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA76, pp. 1255-1257.
- H.-J. Tsai, H.-P. Chang, P. J. Chou, C.-C. Kuo, G.-H. Luo, and M.-H. Wang, “Correction of Vertical Dispersion and Betatron Coupling for the TPS Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH050, pp. 2032-2034.
- M. Kay, C. Taylor, and P. M. Anisimov, “H- Bunch Shape Measurements at LANSCE”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 619-623.
- R. L. Schwartz, R. E. Ebrahim, and P. J. Pretorius, “AVN Radio Telescope Conversion Software Systems”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP069, pp. 661-665.
- C. Welsch, “Physics of Star Wars”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THGOR1, unpublished.
- S.-C. Kim, J. Choi, K. M. Ha, and J. Y. Huang, “LC Filter for High Accuracy and Stability Digital MPS at PLS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE061, pp. 3550-3552.
- S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 345.
- G. Huang, D. Jia, K. Jin, H. Lin, and Y. Liu, “LLRF System Improvement for HLS Linac Upgrade”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB020, pp. 213-215.
- W. Chou et al., “The Design of a $gamma_t$-Jump System for the FNAL Main Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9W015, pp. 994-996.
- M. F. Piller, M. Champion, M. T. Crofford, L. R. Doolittle, and H. Ma, “The Spallation Neutron Source RF Reference System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT062, pp. 3573-3575.
- M. M. Dehler, S. Bettoni, B. Beutner, and G. De Michele, “Wake Field Monitors in a Multi Purpose X Band Accelerating Structure”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEBL3, pp. 634-637.
- J. Yap, A. Steinberg, H. Norman, R. Appleby, and S. Sheehy, “Progress toward TURBO: a novel beam delivery system for charged particle therapy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM091, pp. 5087-5090.
- A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “Isochronous Bend for a High Gain Ring FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS45, pp. XX-XX.
- J. Y. Yoon et al., “Design Study of 325MHz RF Power Coupler for Superconducting Cavity”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2937-2939.
- D. I. Mendenhall and R. A. Winje, “The National Accelerator Laboratory Linear Accelerator Radio-Frequency System”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-4, pp. 515-539.
- K. Yamada et al., “Successful Beam Commissioning of Heavy-Ion Superconducting Linac at RIKEN”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 167.
- M. Moisieienko, O. Bezditko, I. M. Karnaukhov, A. Mytsykov, and A. Y. Zelinsky, “NSC KIPT Experience in Use of Laser Tracker Leica at 401 in Equipment Alignment of 100 MeV/100 KW Electron Linear Accelerator of Neutron Source Driver”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4604-4606.
- S. Henderson, R. Littauer, B. McDaniel, T. Pelaia, R. Talman, and E. Young, “Investigation of Chromaticity Sharing at the Cornell Electron Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V037, pp. 1472-1474.
- S. Vrcic, J. Engelbrecht, and T. Juerges, “SKA control system in 2025”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 910-915.
- A. Bogacz et al., “Transport of 12 GeV positron beams at Ce+BAF”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 1067-1071.
- T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
- E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1215-1218.
- S. Lenci, E. Eisen, and B. Stockwell, “Development of an 805-MHz Pulsed Klystron for the Spallation Neutron Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE119, pp. 2323-2325.
- A. Furman, “RAMPRF: A Program for Synchronous Acceleration”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 300-303.
- F. Sottocorona, D. Garzella, E. Allaria, G. De Ninno, L. Giannessi, and P. Rebernik Ribic, “Sensitivity studies of a seeded FEL operating at 2 nm”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL036, unpublished.
- B. Podobedov et al., “Single Micron Single-Bunch Turn-by-Turn BPM Resolution Achieved at NSLS-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2095-2098.
- V. Kamerdzhiev and J. Dietrich Forschungszentrum J??lich, “Ionisation Beam Profile Monitor at the Cooler Synchrotron COSY-J??lich”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM19, pp. XX-XX.
- L. E. Juergensen et al., “A High-Energy-Scrapersystem for the S-DALINAC Extraction - Design and Installation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 101-104.
- Y.-C. Chen, R. Agustsson, O. Chimalpopoca, and A. Schillaci, “Finalizing the multiphysics design of a high heat-load superconducting undulator”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM071, pp. 1322-1325.
- P. Kolb, “SRF coaxial resonators for hadron acceleration”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 847-852.
- M. H. Rashid, R. K. Bhandari, and C. Mallik, “Potential Forms for Electrostatic and Magnetic Cylindrical Lens and Tracking of Charged Particle”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD087, pp. 4488-4490.
- L. Malina, J. M. Coello de Portugal, J. Dilly, P. K. Skowronski, R. Tomas, and M. S. Toplis, “Performance Optimisation of Turn-by-Turn Beam Position Monitor Data Harmonic Analysis”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3064-3067.
- N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2239-2242.
- C. Schoemers et al., “Beam properties beyond the therapeutic range at HIT”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM064, pp. 5042-5045.
- G. Penn et al., “The Impact of Short-Range Wakes on Injection Into the ALS-U Accumulator Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 429-431.
- F. Martins et al., “Control System of Upgraded High Voltage for Atlas Tile Calorimeter”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 443-446.
- J. Bergl et al., “Embedded Controllers, Field Bus and a Modular IO Concept: Central Elements of BESSY II Controls”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P022, pp. 2493-2495.
- M. Akemoto and S. Takeda, “Development of an X-Band Klystron Modulator with a Pulse-Forming Line and Magnetic Switch”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-28, pp. 374-376.
- A. Chanc?® and J. Payet, “The Beta-beam Decay Ring Design”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH008, pp. 1933-1935.
- C. Matejcek, “5 MeV Beam Transport System for MESA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA020, unpublished.
- M. Velloso, X. Resende, and F. H. de Sá, “Application of the nonlinear optics from off-energy orbits method at the SIRIUS Storage Ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5303, this conference.
- S. Singh, “Particle injection and acceleration in laser wakefield generated via propagation of two laser pulses”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC31, unpublished.
- A. Ueno et al., “First Operation of a 432-MHz, 3-MeV RFQ Stabilized with PISLs (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-47, pp. 166-168.
- J. Z. Zhou, R. Bhatt, and C. Chen, “Cold-Fluid Equilibrium of a Large-Aspect-Ratio Ellipse-Shaped Charged-Particle Beam in a Non-Axisymmetric Periodic Permanent Magnet Focusing Field”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT003, pp. 853-855.
- T. Y. Kim, K. C. Lee, S. J. Noh, and K. H. Chung, “Feasibility Study on Energy Recovery System in 1 MW CW Klystron for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D018, pp. 121-123.
Back to search