Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Walter, F. Ludwig, K. Rehlich, and H. Schlarb, “The Case of MTCA.4: Managing the Introduction of a New Crate Standard at Large Scale Facilities and Beyond”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC081, pp. 285-287.
[n] Y. Hao, V. Litvinenko, and V. Ptitsyn, “Feedback Scheme for Kink Instability in ERL Based Electron Ion Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOAN4, pp. 699-701.
[n] F. Marhauser et al., “A High Average Power RF-Photoinjector Gun Cavity Developed for the BESSY Soft X-ray FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH003, pp. 560-563.
[n] D. J. Butler and J. H. Kelly, “Design of the Diamond Light Source DMM for the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 420-424. doi:10.18429/JACoW-MEDSI2016-FRBA03
[n] D. Wollmann et al., “First Beam Results for a Collimator with In-jaw Beam Position Monitors”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ027, pp. 3747-3749.
[n] A. Latina et al., “Recent Improvements in the Tracking Code PLACET”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP094, pp. 1750-1752.
[n] A. M. Cook, M. P. Dunning, P. Frigola, J. B. Rosenzweig, and K. M. Serratto, “Mitigation of Electric Breakdown in an RF Photoinjector by Removal of Tuning Rods in High-Field Regions”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS034, pp. 2415-2417.
[n] I. Mases Solé, H. Bartosik, K. Paraschou, M. Schenk, and C. Zannini, “Bunch-by-bunch Tune Shift Studies for LHC-type Beams in the CERN SPS”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 194-198. doi:10.18429/JACoW-HB2023-WEA1C1
[n] A. A. Tishchenko and D. Yu. Sergeeva, “Forward X-Ray and Ultraviolet Smith-Purcell Radiation for FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP014, pp. 384-387.
[n] S. Y. Zhao, M. Li, P. Li, J. Wang, D. Wu, and X. Yang, “Theoretical Analysis and Experimental Design of Terahertz Single-Pulse Picking based on Plasma Mirror”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2613-2615. doi:10.18429/JACoW-IPAC2019-WEPGW060
[n] T. Limberg et al., “Velocity Bunching at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC019, pp. 112-114.
[n] V. Candela et al., “Additive Manufacturing of 6 GHz seamless SRF copper cavities: printing, surface treatments and performance investigations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4943-4946. doi:10.18429/JACoW-IPAC2023-THPM023
[n] R. D. Ruth, “The Next Linear Collider Test Accelerator: Status and Results”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY02T, pp. 47-51.
[n] V. B. Reva et al., “Commissioning COSY Cooler with Electron Beam at Novosibirsk”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper TUPM2HA01, pp. 79-83.
[n] U. Raich, “Performance of Linac-4 Instrumentation During Commissioning”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 385-390. doi:10.18429/JACoW-HB2016-WEPM1X01
[n] J. M. C. Chaize, A. Hahto, L. Hardy, J. Mattila, and D. Robinson, “A Mobile Platform for Remote Inspection Inside ESRF Tunnel”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THD002, pp. 907-909.
[n] O. K. Belyaev, V. V. Klokov, V. S. Sevostyanov, and V. B. Stepanov, “Tuning Method for the Accelerating Structure with RFQ Focusing and Increasing Voltage”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-92, pp. 296-298.
[n] H.-D. Gr?ñf and A. Richter, “The Darmstadt Superconducting Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU2-02, pp. 231-236.
[n] T. Oulevey et al., “An Update on the CERN Journey from Bare Metal to Orchestrated Containerization for Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1138-1144. doi:10.18429/JACoW-ICALEPCS2023-TH2AO03
[n] P. Kneisel et al., “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAA005, pp. 484-486.
[n] K. Brackebusch and U. van Rienen, “Eigenmode Computation for Elliptical Cavities Subject to Geometric Variation using Perturbative Methods”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO008, pp. 900-902.
[n] B. L. Parker et al., “Magnets for a Muon Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH073, pp. 3395-3397.
[n] P. Zisopoulos, F. Antoniou, Y. Papaphilippou, E. Hertle, and A.-S. Mueller, “Transverse Tunes Determination from Mixed BPM Data”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1709-1712. doi:10.18429/JACoW-IPAC2015-TUPJE042
[n] H. Mainaud Durand et al., “Theoretical and Practical Feasibility Demonstration of a Micrometric Remotely Controlled Pre-alignment System for the CLIC Linear Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO030, pp. 547-549.
[n] C. R. Rose, P. D. Lara, and R. O. Nelson, “A Simple Method for Real-Time DSP-Based Neutron Chopper Speed and Phase Control”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH101, pp. 1444-1446.
[n] R. G. Olave, J. R. Delayen, and C. S. Hopper, “Multipole Expansion of the Fields in Superconducting High-Velocity Spoke Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB072, pp. 345-347.
[n] D. Robin and W. Wan, “Exploring the Limits of the ALS Triple Bend Lattice”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN117, pp. 1188-1190.
[n] G. Rodrigues et al., “3D Simulation Studies and Optimization of Magnetic Holes of HTS-ECRIS for Improving the Extraction Efficiency and Intensities of Highly Charged Ions”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK02, pp. 27-29.
[n] A. V. Petrenko, A. Burdakov, A. M. Kudryavtsev, P. V. Logatchev, K. V. Lotov, and A. N. Skrinsky, “Experimental Plasma Wake-field Acceleration Project at the VEPP-5 Injection Complex”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT088, pp. 740-742.
[n] E. Kako et al., “Cavity Performances in the 1.3 GHz Saclay / KEK Nb Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C10, pp. 491-502.
[n] W. Z. Zhang, D. S. Zhang, and W. L. Zhan, “RF SYSTEM AT HIRFL-CSR MAIN RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP025, pp. XX-XX.
[n] R. L. Gluckstern, F. Neri, and J. B. J. van Zeijts, “Suppression of Single Bunch Beam Breakup By Autophasing”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1597-1600.
[n] F. C. Pilat et al., “Reduction of Beta* and Increase of Luminosity at RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP008, pp. 2495-2497.
[n] T. Miura et al., “LLRF Control Unit for SuperKEKB Injector Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2134-2136. doi:10.18429/JACoW-IPAC2018-WEPAK018
[n] K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
[n] F. Scarlat et al., “Status of the FEL Project at NILPRP”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH036, pp. 323-325.
[n] X. X. Huang, W. Fang, A. Grudiev, and Z. T. Zhao, “Study on the Design of the X-band Waveguide-damped Structure”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2886-2889. doi:10.18429/JACoW-IPAC2019-WEPRB034
[n] W. Vodel, R. Geithner, R. Neubert, A. Peters, M. Schwickert, and P. Seidel, “An LTS SQUID-Based High Precision Measurement Tool for Nuclear Physics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP046, pp. 3555-3557.
[n] X. J. Wang et al., “Experimental Results of the ATF In-line Injection System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE11, pp. 890-892.
[n] L. Adams and I. Thomson, “A Solid-State Dosimeter Based on a New Glow Curve for Beryllia”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4307-4311.
[n] P. Berrutti et al., “Update on Plasma Processing R&D for LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2656-2658. doi:10.18429/JACoW-IPAC2018-WEPMK012
[n] S. Verdu-Andres et al., “Trim Tuning of SPS-Series DQW Crab Cavity Prototypes”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1187-1189. doi:10.18429/JACoW-IPAC2017-MOPVA143
[n] S. A. Griffiths and D. E. Poole, “An Uninterruptible Power Supply for the SRS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP032G, pp. 2323-2325.
[n] K. Abe et al., “Development of the Kicker Magnet for BSR”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B12, pp. 2113-2115.
[n] G.-T. Park, H. J. Cha, H. C. Jung, H. Kim, W. K. Kim, and Y. J. K. Kim, “The Early Results of the Vertical Test for =0.12 HWR at RISP”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3839-3841. doi:10.18429/JACoW-IPAC2015-THPF069
[n] K. Seiya, B. Chase, J. E. Dey, P. W. Joireman, I. Kourbanis, and A. Yagodnitsyna, “Space Charge Measurements with a High Intensity Bunch at the Fermilab Main Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP094, pp. 1648-1650.
[n] C. M. Gulliford, A. C. Bartnik, I. V. Bazarov, and B. M. Dunham, “Low Emittance in the Cornell ERL Injector Prototype”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOAA4, pp. 706-708.
[n] F. Tamura et al., “Baseband Simulation Model of the Vector RF Voltage Control System for the J-PARC RCS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2144-2146. doi:10.18429/JACoW-IPAC2018-WEPAL003
[n] T. Tanaka, T. Hara, T. Hatsui, H. Tanaka, K. Togawa, and M. Yabashi, “X-ray Based Undulator Commissioning in SACLA”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THOCI01, pp. 543-547.
[n] C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 631-634. doi:10.18429/JACoW-IPAC2025-MOPS019
[n] H. Li et al., “RF Test of ESS Superconducting Spoke Cavities at Uppsala University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2227-2229. doi:10.18429/JACoW-IPAC2016-WEPMB050
[n] J. Krempasky, U. Flechsig, B. Kalantari, X. Q. Wang, T. Mooney, and M. L. Rivers, “10 Years of Experiment Control at SLS Beam Lines: an Outlook to SwissFEL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC066, pp. 729-732.
[n] H. Brand, G. Caporaso, F. Chambers, F. Coffield, and D. Lager, “LIAM-A Linear Induction Accelerator Model”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3079-3082.
[n] R. Broucquart, M. El Ajjouri, N. Hubert, S. M. Minolli, S. Poirier, and D. P?®deau, “CIEL: Current Injection Efficiency and Lifetime”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEPP02, unpublished.
[n] C. Steier, A. Biocca, E. Domning, S. Jacobson, G. Portmann, and Y. Wu, “Design of a Fast Global Orbit Feedback System for the Advanced Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH009, pp. 1252-1254.
[n] R. R?â et al., “Effect of the Two-Close-Frequency Heating to the Extracted Ion Beam and to the X-Ray Flux Emitted by the ECR Plasma”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 165-169. doi:10.18429/JACoW-ECRIS2018-WEA5
[n] S. C. Kim, S. S. Park, S. H. Kim, Y. J. Han, and S. H. Nam, “A New Modulator Controller of The PLS Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO409, pp. 55-57.
[n] A. V. Aleksandrov et al., “Status of the Injector Complex for CT-Factory at Novosibirsk”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D068, pp. 254-256.
[n] S. Nakajima and K. Ikegami, “The Vacuum System of the IPCR SSC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-42, pp. 537-539.
[n] S. I. Sosa Guitron, J. R. Delayen, and V. S. Morozov, “Modeling Local Crabbing Dynamics in the JLEIC Ion Collider Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3022-3024. doi:10.18429/JACoW-IPAC2017-WEPIK043
[n] R. Wilson, “Medical Uses of the Harvard University Cyclotron: An Overall View (Invited Paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 578-586.
[n] B. Sha, J. Gao, Y. Wang, and C. H. Yu, “MDI Issues in CEPC Double Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2965-2967. doi:10.18429/JACoW-IPAC2017-WEPIK021
[n] Z. He, W. Cui, Y. H. Guo, Y. He, Y. Luo, and Q. Zhao, “Design of Control Networks for China Initiative Accelerator Driven System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 739-742. doi:10.18429/JACoW-ICALEPCS2015-WEPGF021
[n] Yu. V. Bylinsky et al., “Beam Matching in the Transition Region between DTL and DAWL of the INR Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 566-569.
[n] B. G. Chidley, F. P. Adams, G. E. McMichael, T. Tran Ngoc, and T. S. Bhatia, “New Vanes for RFQ1”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO402, pp. 42-44.
[n] D. R. Makowski, G. W. Jablonski, A. Napieralski, and P. Predki, “Low Latency Data Transmission in LLRF Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP039, pp. 877-879.
[n] G. L. Wang, D. X. Dai, G. R. Wu, X. M. Yang, and W. Q. Zhang, “Operating of SXFEL in a Single Stage High Gain Harmonic Generation Scheme”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 29-33. doi:10.18429/JACoW-FEL2015-MOC04
[n] M. J. Barnes et al., “Reduction of Surface Flashover of the Beam Screen of the LHC Injection Kickers”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA032, pp. 735-737.
[n] A. Gokhale, B. P. Dubey, and A. S. Sharma, “Artificial Neural Network Calculates Backward Wave Oscillator Parameters Reliably For Pulsed Accelerators”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA073, pp. 738-739.
[n] Z. A. Conway, B. M. Guilfoyle, M. Kedzie, M. P. Kelly, T. Reid, and H. Guo, “Progress Toward 2 K High Performance Half-wave Resonators and Cryomodule”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 692-694. doi:10.18429/JACoW-SRF2017-WEYA05
[n] P. Marchand, “Review and Prospects of RF Solid State Amplifiers for Particle Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2537-2542. doi:10.18429/JACoW-IPAC2017-WEZB1
[n] S. T. Craig, S. B. Alexander, R. J. West, and M. P. Simpson, “Pulsed-Linac Synchronization Using an Embedded Micro-Controller”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-23, pp. 668-670.
[n] G. Liu, X. Bao, C. Li, J. G. Wang, and K. Xuan, “First Experience with VMware Servers at HLS”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS004, pp. 323-325.
[n] C. S. Chen, K. T. Chen, C. H. Kuo, and K. K. Lin, “Bunch-by-Bunch Intensity, Position Monitor for the Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP44C, pp. 1532-1534.
[n] C. Wang, X. D. Jiang, J. Z. Wang, S. M. Wei, N. G. Zeng, and T. J. Zhang, “The Redesign, Installation of Light II-A Pulsed Power Generator and its Potential Application”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP067, pp. 1702-1704.
[n] R. E. Laxdal et al., “The Design, Fabrication and Testing of an Iron-core Current Compensated Magnetic Channel for Cyclotron Extraction”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2382-2385.
[n] R. Zeng and O. Troeng, “Investigation to Improve Efficiency and Availability in Control and Operation of Superconducting Cavity at ESS”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 474-479. doi:10.18429/JACoW-HB2016-THAM4X01
[n] D. Van Winkle, J. D. Fox, and A. Young, “11.424 GHz Stripline Transversal Filter for Sub-Picosecond Bunch Timing Measurements”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM080, pp. 367-371.
[n] H. G. Kirk et al., “A High-Power Target Experiment at the CERN PS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS094, pp. 646-648.
[n] B. Dwersteg, U. Klein, W.-D. Moeller, A. Palussek, D. Proch, and H. Vogel, “Experiment of the First Prototypes of Pipe Cooled 500 MHz Cavities from Explosion Bonded Niobium Copper”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1430-1433.
[n] J. Harasimowicz and C. P. Welsch, “Optimisation Studies of a Resonant Capacitive Pick-Up for Beam Position Monitoring of Low Intensity, Low Velocity Antiproton Beams at FLAIR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD06, pp. 300-302.
[n] C. E. Peters, C. Dickerson, F. Garcia, and M. A. Power, “Integration of the TRACK Beam Dynamics Model to Decrease LINAC Tuning Times”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 291-294. doi:10.18429/JACoW-ICALEPCS2015-MOPGF092
[n] N. V. Avreline, W. Gyles, and R. L. Watt, “Methods of Increasing Accuracy in Precision Magnetic Field Measurements of Cyclotron Magnets”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU4PB04, pp. 283-285.
[n] H. Klein et al., “Recent Work on the Helix Structure and Properties of Tandem Helix Combinations for the Acceleration of Heavy Ions”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper J02, pp. 265-274.
[n] N. Sitaraman et al., “New Recipes to Optimize the Niobium Oxide Surface From First-Principles Calculations”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 426. doi:10.18429/JACoW-SRF2021-TUPFDV010
[n] D. M?ñder, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Status of CH Cavity and Solenoid Design of the 17 MeV Injector for MYRRHA”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB012, pp. 29-31.
[n] C. Poloni, R. Bracco, B. Diviacco, R. P. Walker, and D. Zangrando, “Status of Development of the Insertion Devices for ELETTRA”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2712-2715.
[n] E. Benedetto, G. Franchetti, K. Ohmi, D. Schulte, and F. Zimmermann, “Emittance Growth Caused by Electron Cloud Below the Fast TMCI Threshold: Numerical Noise or True Physics?”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAP013, pp. 1344-1346.
[n] D. Trbojevic and V. S. Morozov, “Non-scaling Fixed Field Alternating Gradient Permanent Magnet Cancer Therapy Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOBA03, pp. 1923-1925.
[n] T. K. Charles, D. M. Paganin, M. J. Boland, and R. T. Dowd, “Beam by Design: Current Pulse Shaping Through Longitudinal Dispersion Control”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 644-647. doi:10.18429/JACoW-IPAC2017-MOPIK055
[n] C. A. Martins, G. G?Âransson, M. Kalafatic, and M. Collins, “Pulsed High Power Klystron Modulators for ESS Linac Based on the Stacked Multi-Level Topology”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 359-362. doi:10.18429/JACoW-LINAC2016-TU2A02
[n] V. S. Skachkov, I. M. Kapchinskiy, N. V. Lazarev, and A. V. Selin, “Circular Permanent Magnet Quadrupoles for Higher Frequency and Higher Shunt Impedance Linacs”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1400-1403.
[n] D. Wollmann et al., “Experimental Demonstration of the Induction Shimming Concept in Superconductive Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP087, pp. 2474-2476.
[n] R. M. Thurman-Keup, A. H. Lumpkin, and J. C. T. Thangaraj, “An Optical and Terahertz Instrumentation System at the FAST Linac at Fermilab”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 342-346. doi:10.18429/JACoW-IBIC2017-WEPCC04
[n] N. I. Karpov, L. I. Judin, Y. M. Krasnikov, S. T. Latushkin, and I. V. Naumov, “Prompt Diagnostics of the Cyclotron Dees Shift”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1279-1281.
[n] N. Hayashi, S. Lee, and T. Toyama, “Beam-based Alignment Strategy for the Group Controlled Magnets System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH064, pp. 1160-1162.
[n] R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Photonic Bandgap (PBG) Accelerator Structure Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS006, pp. 3005-3007.
[n] A. J. Saverskiy, H. Deruyter, M. Hernandez, A. V. Mishin, and D. Skowbo, “Portable X-Band Linear Electron Accelerators for Radiographic Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP027, pp. 1985-1987.
[n] B. Schriefer, W. Anders, A. Heugel, H. Hoffmann, G. Mielczarek, and H. Stein, “Commissioning of Klystron Transmitters with 270 kW_{CW} at 1.3 GHz”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 499-501. doi:10.18429/JACoW-SRF2019-TUP036
[n] I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986.
[n] B. P. Murin, V. M. Belugin, B. I. Bondarev, A. P. Durkin, and I. V. Shumakov, “Characteristics and Limiting Parameters of Powerful RF Regotron-type Generator for Linear Accelerator with High Mean Current”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1930-1933.
[n] M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
[n] S. Takano, M. Masaki, and H. Sumitomo, “Recent Progress in X-Ray Emittance Diagnostics at SPring-8”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 283-287. doi:10.18429/JACoW-IBIC2015-TUCLA02
[n] C. Carli, M. Benedikt, S. Hancock, V. Knuenz, and I. Vonderhaid, “Longitudinal Painting Schemes for H- Charge Exchange Injection into the PS2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP056, pp. 1409-1411.
[n] D. Stratakis, J. C. Gallardo, and R. B. Palmer, “Enhancement of RF Breakdown Threshold of Microwave Cavities by Magnetic Insulation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOAS4, pp. 2053-2055.
[n] P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
[n] G. H. Biallas, S. V. Benson, T. Hiatt, G. Neil, and M. D. Snyder, “The 8 cm Period Electromagnetic Wiggler Magnet with Coils Made from Sheet Copper”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT082, pp. 4093-4095.
[n] V. Schlott et al., “Intra Bunch Train Feedback System for the European X-FEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH096, pp. 3017-3019.
[n] A. Miyamoto, H. Hama, F. Hinode, M. Kawai, K. Shinto, and T. Tanaka, “Study of Slow Beam Extraction Through the Third Order Resonance with Transverse Phase Space Manipulation by a Mono-Frequency RFKO”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE025, pp. 1892-1894.
[n] A. Latina, J. Pfingstner, D. Schulte, and E. Adli, “Tests of Beam-based Alignment at FACET”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1186-1188. doi:10.18429/JACoW-IPAC2014-TUPRO065
[n] M. Kuchnir, W. B. Fowler, P. M. Mantsch, and R. J. Walker, “Spool Piece Testing Facility”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3325-3327.
[n] J. Q. Qiu, H. Chen, and C.-X. Tang, “PIC Simulation of the Coaxial Magnetron for Low Energy X-band Linear Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA067, pp. 232-234.
[n] T. Saito et al., “Thermal Effect in Stability of Cyclotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D065, pp. 244-246.
[n] G. Jackson, “Measurement of the Resistive Wall Instability in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1755-1758.
[n] Y. Yamazaki, K. Takata, and S. Tokumoto, “Damping Test of the Higher-Order Modes of the Re-Entrant Accelerating Cavity”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2915-2918.
[n] F. L. Krawczyk et al., “Design of a 300 GHz Broadband TWT Coupler and RF-Structure”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP84, pp. 794-796.
[n] G. Terenziani, I. Aviles Santillana, S. Calatroni, T. Junginger, and A. P. Ehiasarian, “Nb Coating Developments with HIPIMS for SRF Applications”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP078, pp. 627-630.
[n] F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
[n] A. Blas, R. Cappi, R. Garoby, S. Hancock, K. Schindl, and J. L. Vallet, “Beams in the CERN PS Complex after the RF Upgrades for LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP06H, pp. 505-507.
[n] B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1549-1552.
[n] A. Harvey, E. Hubbard, M. Schulze, S. Sheynin, D. Barlow, and T. Hunter, “Designs of the Low Energy Intertank Quadrupole Magnets for APT”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA80, pp. 3576-3578.
[n] S. V. Barabin and G. Bassato, “Design of a Digital Controller for ALPI 80 MHz Resonators”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS007, pp. 174-176.
[n] A. R. Beck, B. Bru, S. Chel, and Ch. Ricaud, “Six-Dimensional Beam Matching for Axial Injection into a Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-01, pp. 432-434.
[n] P. A. Bystrov, Y. S. Pavlov, O. V. Souvorova, V. P. Filippovich, and N. V. Iluhina, “Effect of Ozone in Experiments on the Development of Food Irradiation Methods”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 240-242. doi:10.18429/JACoW-RUPAC2018-TUPSA46
[n] R. Takai et al., “Design and Initial Commissioning of Beam Diagnostics for the KEK Compact ERL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCYB2, pp. 7-11.
[n] S. Schreiber, “Results from the free-electron laser FLASH”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper MOYMA02, pp. 16-16.
[n] R. H. Scott, C. Dickerson, R. C. Pardo, and R. C. Vondrasek, “A New ECRIS Installation at the Argonne Tandem Linac Accelerator System”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 105-107. doi:10.18429/JACoW-ECRIS2016-WEPP14
[n] J. L. N. Brito, S. R. Marques, L. A. Martins, and D. O. Tavares, “Development Status of the Sirius Timing System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1007-1010. doi:10.18429/JACoW-ICALEPCS2015-WEPGF128
[n] C. Bovet, R. J. Colchester, G. Ferioli, J. J. Gras, R. Jung, and J. M. Vouillot Geneva, “The OTR Screen Betatron Matching Monitor of the CERN SPS”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT11, pp. XX-XX.
[n] C. R. Ader, C. C. Jensen, R. E. Reilly, D. Snee, and J. H. Wilson, “Recent Experience in the Fabrication and Brazing of Ceramic Beam Tubes for Kicker Magnets at FNAL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC139, pp. 2335-2337.
[n] A. Blas et al., “The New CERN PS Transverse Damper”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP075, pp. 2183-2185.
[n] L. Emery, G. I. Fystro, H. Shang, and M. L. Smith, “Beamline-Controlled Steering of Source-Point Angle at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 887-889. doi:10.18429/JACoW-NAPAC2016-WEPOB04
[n] J. Borburgh, M. Hourican, and M. Thivent, “A New Set of Magnetic Septa in the CERN PS Complex”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP11, pp. 2283-2285.
[n] A. L. Gabard et al., “A 2.9 Tesla Room Temperature Superbend Magnet for the Swiss Light Source at PSI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC063, pp. 3038-3040.
[n] G. Luijckx et al., “Status of the Amsterdam Pulse Stretcher Project (AmPS)”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 589-592.
[n] C.-S. Hwang, C.-H. Chang, M.-H. Huang, and P. H. Lin, “Magnet Block Arrangements for the Apple-II Elliptically Polarized Undulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN070, pp. 1079-1081.
[n] E. Samsonov, S. A. Kostromin, N. A. Morozov, and E. Syresin, “Beam Dynamics Simulations in Cyclotron C230 Considering Imperfections of Magnetic Field Radial Component”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3038-3040. doi:10.18429/JACoW-IPAC2014-THPRO070
[n] R. A. Jameson, “Design and Simulation of Practical Alternating-Phase-Focused (APF) Linacs ÔÇô Synthesis and Extension in Tribute to Pioneering Russian APF Research”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOACH02, pp. 12-14.
[n] C. W. Owen, C. A. Radmer, and D. E. Young, “RF Perturbation Measurements in Long Linac Cavities”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-01, pp. 140-145.
[n] M. Syha, H. H?ñhnel, U. Ratzinger, and M. Schuett, “New Beam Dynamics Simulations for the FAIR p-Linac RFQ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 921-924. doi:10.18429/JACoW-IPAC2019-MOPTS032
[n] In Soo Ko, “Status of Pohang Light Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4C004, pp. 59-63.
[n] T. Kuo et al., “Initial Test Results from a Multicusp Source for TRIUMF's Radioactive Beam Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C006, pp. 2675-2677.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Walter, F. Ludwig, K. Rehlich, and H. Schlarb, “The Case of MTCA.4: Managing the Introduction of a New Crate Standard at Large Scale Facilities and Beyond”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC081, pp. 285-287.
- Y. Hao, V. Litvinenko, and V. Ptitsyn, “Feedback Scheme for Kink Instability in ERL Based Electron Ion Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOAN4, pp. 699-701.
- F. Marhauser et al., “A High Average Power RF-Photoinjector Gun Cavity Developed for the BESSY Soft X-ray FEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH003, pp. 560-563.
- D. J. Butler and J. H. Kelly, “Design of the Diamond Light Source DMM for the VMXi Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 420-424.
- D. Wollmann et al., “First Beam Results for a Collimator with In-jaw Beam Position Monitors”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPZ027, pp. 3747-3749.
- A. Latina et al., “Recent Improvements in the Tracking Code PLACET”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP094, pp. 1750-1752.
- A. M. Cook, M. P. Dunning, P. Frigola, J. B. Rosenzweig, and K. M. Serratto, “Mitigation of Electric Breakdown in an RF Photoinjector by Removal of Tuning Rods in High-Field Regions”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS034, pp. 2415-2417.
- I. Mases Solé, H. Bartosik, K. Paraschou, M. Schenk, and C. Zannini, “Bunch-by-bunch Tune Shift Studies for LHC-type Beams in the CERN SPS”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA1C1, pp. 194-198.
- A. A. Tishchenko and D. Yu. Sergeeva, “Forward X-Ray and Ultraviolet Smith-Purcell Radiation for FEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP014, pp. 384-387.
- S. Y. Zhao, M. Li, P. Li, J. Wang, D. Wu, and X. Yang, “Theoretical Analysis and Experimental Design of Terahertz Single-Pulse Picking based on Plasma Mirror”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2613-2615.
- T. Limberg et al., “Velocity Bunching at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC019, pp. 112-114.
- V. Candela et al., “Additive Manufacturing of 6 GHz seamless SRF copper cavities: printing, surface treatments and performance investigations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM023, pp. 4943-4946.
- R. D. Ruth, “The Next Linear Collider Test Accelerator: Status and Results”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY02T, pp. 47-51.
- V. B. Reva et al., “Commissioning COSY Cooler with Electron Beam at Novosibirsk”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper TUPM2HA01, pp. 79-83.
- U. Raich, “Performance of Linac-4 Instrumentation During Commissioning”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 385-390.
- J. M. C. Chaize, A. Hahto, L. Hardy, J. Mattila, and D. Robinson, “A Mobile Platform for Remote Inspection Inside ESRF Tunnel”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THD002, pp. 907-909.
- O. K. Belyaev, V. V. Klokov, V. S. Sevostyanov, and V. B. Stepanov, “Tuning Method for the Accelerating Structure with RFQ Focusing and Increasing Voltage”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-92, pp. 296-298.
- H.-D. Gr?ñf and A. Richter, “The Darmstadt Superconducting Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TU2-02, pp. 231-236.
- T. Oulevey et al., “An Update on the CERN Journey from Bare Metal to Orchestrated Containerization for Controls”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2AO03, pp. 1138-1144.
- P. Kneisel et al., “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAA005, pp. 484-486.
- K. Brackebusch and U. van Rienen, “Eigenmode Computation for Elliptical Cavities Subject to Geometric Variation using Perturbative Methods”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO008, pp. 900-902.
- B. L. Parker et al., “Magnets for a Muon Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH073, pp. 3395-3397.
- P. Zisopoulos, F. Antoniou, Y. Papaphilippou, E. Hertle, and A.-S. Mueller, “Transverse Tunes Determination from Mixed BPM Data”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1709-1712.
- H. Mainaud Durand et al., “Theoretical and Practical Feasibility Demonstration of a Micrometric Remotely Controlled Pre-alignment System for the CLIC Linear Collider”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO030, pp. 547-549.
- C. R. Rose, P. D. Lara, and R. O. Nelson, “A Simple Method for Real-Time DSP-Based Neutron Chopper Speed and Phase Control”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH101, pp. 1444-1446.
- R. G. Olave, J. R. Delayen, and C. S. Hopper, “Multipole Expansion of the Fields in Superconducting High-Velocity Spoke Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB072, pp. 345-347.
- D. Robin and W. Wan, “Exploring the Limits of the ALS Triple Bend Lattice”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN117, pp. 1188-1190.
- G. Rodrigues et al., “3D Simulation Studies and Optimization of Magnetic Holes of HTS-ECRIS for Improving the Extraction Efficiency and Intensities of Highly Charged Ions”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK02, pp. 27-29.
- A. V. Petrenko, A. Burdakov, A. M. Kudryavtsev, P. V. Logatchev, K. V. Lotov, and A. N. Skrinsky, “Experimental Plasma Wake-field Acceleration Project at the VEPP-5 Injection Complex”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT088, pp. 740-742.
- E. Kako et al., “Cavity Performances in the 1.3 GHz Saclay / KEK Nb Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C10, pp. 491-502.
- W. Z. Zhang, D. S. Zhang, and W. L. Zhan, “RF SYSTEM AT HIRFL-CSR MAIN RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP025, pp. XX-XX.
- R. L. Gluckstern, F. Neri, and J. B. J. van Zeijts, “Suppression of Single Bunch Beam Breakup By Autophasing”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1597-1600.
- F. C. Pilat et al., “Reduction of Beta* and Increase of Luminosity at RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP008, pp. 2495-2497.
- T. Miura et al., “LLRF Control Unit for SuperKEKB Injector Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2134-2136.
- K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
- F. Scarlat et al., “Status of the FEL Project at NILPRP”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH036, pp. 323-325.
- X. X. Huang, W. Fang, A. Grudiev, and Z. T. Zhao, “Study on the Design of the X-band Waveguide-damped Structure”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2886-2889.
- W. Vodel, R. Geithner, R. Neubert, A. Peters, M. Schwickert, and P. Seidel, “An LTS SQUID-Based High Precision Measurement Tool for Nuclear Physics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP046, pp. 3555-3557.
- X. J. Wang et al., “Experimental Results of the ATF In-line Injection System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPE11, pp. 890-892.
- L. Adams and I. Thomson, “A Solid-State Dosimeter Based on a New Glow Curve for Beryllia”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4307-4311.
- P. Berrutti et al., “Update on Plasma Processing R&D for LCLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2656-2658.
- S. Verdu-Andres et al., “Trim Tuning of SPS-Series DQW Crab Cavity Prototypes”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1187-1189.
- S. A. Griffiths and D. E. Poole, “An Uninterruptible Power Supply for the SRS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP032G, pp. 2323-2325.
- K. Abe et al., “Development of the Kicker Magnet for BSR”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4B12, pp. 2113-2115.
- G.-T. Park, H. J. Cha, H. C. Jung, H. Kim, W. K. Kim, and Y. J. K. Kim, “The Early Results of the Vertical Test for =0.12 HWR at RISP”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3839-3841.
- K. Seiya, B. Chase, J. E. Dey, P. W. Joireman, I. Kourbanis, and A. Yagodnitsyna, “Space Charge Measurements with a High Intensity Bunch at the Fermilab Main Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP094, pp. 1648-1650.
- C. M. Gulliford, A. C. Bartnik, I. V. Bazarov, and B. M. Dunham, “Low Emittance in the Cornell ERL Injector Prototype”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOAA4, pp. 706-708.
- F. Tamura et al., “Baseband Simulation Model of the Vector RF Voltage Control System for the J-PARC RCS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2144-2146.
- T. Tanaka, T. Hara, T. Hatsui, H. Tanaka, K. Togawa, and M. Yabashi, “X-ray Based Undulator Commissioning in SACLA”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THOCI01, pp. 543-547.
- C. Maccani, “Simulated beam performance of the TWOCRYST proof of principle experiment at the LHC”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS019, pp. 631-634.
- H. Li et al., “RF Test of ESS Superconducting Spoke Cavities at Uppsala University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2227-2229.
- J. Krempasky, U. Flechsig, B. Kalantari, X. Q. Wang, T. Mooney, and M. L. Rivers, “10 Years of Experiment Control at SLS Beam Lines: an Outlook to SwissFEL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC066, pp. 729-732.
- H. Brand, G. Caporaso, F. Chambers, F. Coffield, and D. Lager, “LIAM-A Linear Induction Accelerator Model”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3079-3082.
- R. Broucquart, M. El Ajjouri, N. Hubert, S. M. Minolli, S. Poirier, and D. P?®deau, “CIEL: Current Injection Efficiency and Lifetime”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper WEPP02, unpublished.
- C. Steier, A. Biocca, E. Domning, S. Jacobson, G. Portmann, and Y. Wu, “Design of a Fast Global Orbit Feedback System for the Advanced Light Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH009, pp. 1252-1254.
- R. R?â et al., “Effect of the Two-Close-Frequency Heating to the Extracted Ion Beam and to the X-Ray Flux Emitted by the ECR Plasma”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 165-169.
- S. C. Kim, S. S. Park, S. H. Kim, Y. J. Han, and S. H. Nam, “A New Modulator Controller of The PLS Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO409, pp. 55-57.
- A. V. Aleksandrov et al., “Status of the Injector Complex for CT-Factory at Novosibirsk”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D068, pp. 254-256.
- S. Nakajima and K. Ikegami, “The Vacuum System of the IPCR SSC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-42, pp. 537-539.
- S. I. Sosa Guitron, J. R. Delayen, and V. S. Morozov, “Modeling Local Crabbing Dynamics in the JLEIC Ion Collider Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3022-3024.
- R. Wilson, “Medical Uses of the Harvard University Cyclotron: An Overall View (Invited Paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 578-586.
- B. Sha, J. Gao, Y. Wang, and C. H. Yu, “MDI Issues in CEPC Double Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2965-2967.
- Z. He, W. Cui, Y. H. Guo, Y. He, Y. Luo, and Q. Zhao, “Design of Control Networks for China Initiative Accelerator Driven System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 739-742.
- Yu. V. Bylinsky et al., “Beam Matching in the Transition Region between DTL and DAWL of the INR Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 566-569.
- B. G. Chidley, F. P. Adams, G. E. McMichael, T. Tran Ngoc, and T. S. Bhatia, “New Vanes for RFQ1”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO402, pp. 42-44.
- D. R. Makowski, G. W. Jablonski, A. Napieralski, and P. Predki, “Low Latency Data Transmission in LLRF Systems”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP039, pp. 877-879.
- G. L. Wang, D. X. Dai, G. R. Wu, X. M. Yang, and W. Q. Zhang, “Operating of SXFEL in a Single Stage High Gain Harmonic Generation Scheme”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 29-33.
- M. J. Barnes et al., “Reduction of Surface Flashover of the Beam Screen of the LHC Injection Kickers”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA032, pp. 735-737.
- A. Gokhale, B. P. Dubey, and A. S. Sharma, “Artificial Neural Network Calculates Backward Wave Oscillator Parameters Reliably For Pulsed Accelerators”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA073, pp. 738-739.
- Z. A. Conway, B. M. Guilfoyle, M. Kedzie, M. P. Kelly, T. Reid, and H. Guo, “Progress Toward 2 K High Performance Half-wave Resonators and Cryomodule”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 692-694.
- P. Marchand, “Review and Prospects of RF Solid State Amplifiers for Particle Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2537-2542.
- S. T. Craig, S. B. Alexander, R. J. West, and M. P. Simpson, “Pulsed-Linac Synchronization Using an Embedded Micro-Controller”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-23, pp. 668-670.
- G. Liu, X. Bao, C. Li, J. G. Wang, and K. Xuan, “First Experience with VMware Servers at HLS”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS004, pp. 323-325.
- C. S. Chen, K. T. Chen, C. H. Kuo, and K. K. Lin, “Bunch-by-Bunch Intensity, Position Monitor for the Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP44C, pp. 1532-1534.
- C. Wang, X. D. Jiang, J. Z. Wang, S. M. Wei, N. G. Zeng, and T. J. Zhang, “The Redesign, Installation of Light II-A Pulsed Power Generator and its Potential Application”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP067, pp. 1702-1704.
- R. E. Laxdal et al., “The Design, Fabrication and Testing of an Iron-core Current Compensated Magnetic Channel for Cyclotron Extraction”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2382-2385.
- R. Zeng and O. Troeng, “Investigation to Improve Efficiency and Availability in Control and Operation of Superconducting Cavity at ESS”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 474-479.
- D. Van Winkle, J. D. Fox, and A. Young, “11.424 GHz Stripline Transversal Filter for Sub-Picosecond Bunch Timing Measurements”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM080, pp. 367-371.
- H. G. Kirk et al., “A High-Power Target Experiment at the CERN PS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS094, pp. 646-648.
- B. Dwersteg, U. Klein, W.-D. Moeller, A. Palussek, D. Proch, and H. Vogel, “Experiment of the First Prototypes of Pipe Cooled 500 MHz Cavities from Explosion Bonded Niobium Copper”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1430-1433.
- J. Harasimowicz and C. P. Welsch, “Optimisation Studies of a Resonant Capacitive Pick-Up for Beam Position Monitoring of Low Intensity, Low Velocity Antiproton Beams at FLAIR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD06, pp. 300-302.
- C. E. Peters, C. Dickerson, F. Garcia, and M. A. Power, “Integration of the TRACK Beam Dynamics Model to Decrease LINAC Tuning Times”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 291-294.
- N. V. Avreline, W. Gyles, and R. L. Watt, “Methods of Increasing Accuracy in Precision Magnetic Field Measurements of Cyclotron Magnets”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU4PB04, pp. 283-285.
- H. Klein et al., “Recent Work on the Helix Structure and Properties of Tandem Helix Combinations for the Acceleration of Heavy Ions”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper J02, pp. 265-274.
- N. Sitaraman et al., “New Recipes to Optimize the Niobium Oxide Surface From First-Principles Calculations”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 426.
- D. M?ñder, H. Klein, H. Podlech, U. Ratzinger, and C. Zhang, “Status of CH Cavity and Solenoid Design of the 17 MeV Injector for MYRRHA”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB012, pp. 29-31.
- C. Poloni, R. Bracco, B. Diviacco, R. P. Walker, and D. Zangrando, “Status of Development of the Insertion Devices for ELETTRA”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2712-2715.
- E. Benedetto, G. Franchetti, K. Ohmi, D. Schulte, and F. Zimmermann, “Emittance Growth Caused by Electron Cloud Below the Fast TMCI Threshold: Numerical Noise or True Physics?”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAP013, pp. 1344-1346.
- D. Trbojevic and V. S. Morozov, “Non-scaling Fixed Field Alternating Gradient Permanent Magnet Cancer Therapy Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOBA03, pp. 1923-1925.
- T. K. Charles, D. M. Paganin, M. J. Boland, and R. T. Dowd, “Beam by Design: Current Pulse Shaping Through Longitudinal Dispersion Control”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 644-647.
- C. A. Martins, G. G?Âransson, M. Kalafatic, and M. Collins, “Pulsed High Power Klystron Modulators for ESS Linac Based on the Stacked Multi-Level Topology”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 359-362.
- V. S. Skachkov, I. M. Kapchinskiy, N. V. Lazarev, and A. V. Selin, “Circular Permanent Magnet Quadrupoles for Higher Frequency and Higher Shunt Impedance Linacs”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1400-1403.
- D. Wollmann et al., “Experimental Demonstration of the Induction Shimming Concept in Superconductive Undulators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP087, pp. 2474-2476.
- R. M. Thurman-Keup, A. H. Lumpkin, and J. C. T. Thangaraj, “An Optical and Terahertz Instrumentation System at the FAST Linac at Fermilab”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 342-346.
- N. I. Karpov, L. I. Judin, Y. M. Krasnikov, S. T. Latushkin, and I. V. Naumov, “Prompt Diagnostics of the Cyclotron Dees Shift”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1279-1281.
- N. Hayashi, S. Lee, and T. Toyama, “Beam-based Alignment Strategy for the Group Controlled Magnets System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH064, pp. 1160-1162.
- R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Photonic Bandgap (PBG) Accelerator Structure Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS006, pp. 3005-3007.
- A. J. Saverskiy, H. Deruyter, M. Hernandez, A. V. Mishin, and D. Skowbo, “Portable X-Band Linear Electron Accelerators for Radiographic Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP027, pp. 1985-1987.
- B. Schriefer, W. Anders, A. Heugel, H. Hoffmann, G. Mielczarek, and H. Stein, “Commissioning of Klystron Transmitters with 270 kW_{CW} at 1.3 GHz”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 499-501.
- I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986.
- B. P. Murin, V. M. Belugin, B. I. Bondarev, A. P. Durkin, and I. V. Shumakov, “Characteristics and Limiting Parameters of Powerful RF Regotron-type Generator for Linear Accelerator with High Mean Current”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1930-1933.
- M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
- S. Takano, M. Masaki, and H. Sumitomo, “Recent Progress in X-Ray Emittance Diagnostics at SPring-8”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 283-287.
- C. Carli, M. Benedikt, S. Hancock, V. Knuenz, and I. Vonderhaid, “Longitudinal Painting Schemes for H- Charge Exchange Injection into the PS2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP056, pp. 1409-1411.
- D. Stratakis, J. C. Gallardo, and R. B. Palmer, “Enhancement of RF Breakdown Threshold of Microwave Cavities by Magnetic Insulation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOAS4, pp. 2053-2055.
- P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
- G. H. Biallas, S. V. Benson, T. Hiatt, G. Neil, and M. D. Snyder, “The 8 cm Period Electromagnetic Wiggler Magnet with Coils Made from Sheet Copper”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT082, pp. 4093-4095.
- V. Schlott et al., “Intra Bunch Train Feedback System for the European X-FEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH096, pp. 3017-3019.
- A. Miyamoto, H. Hama, F. Hinode, M. Kawai, K. Shinto, and T. Tanaka, “Study of Slow Beam Extraction Through the Third Order Resonance with Transverse Phase Space Manipulation by a Mono-Frequency RFKO”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE025, pp. 1892-1894.
- A. Latina, J. Pfingstner, D. Schulte, and E. Adli, “Tests of Beam-based Alignment at FACET”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1186-1188.
- M. Kuchnir, W. B. Fowler, P. M. Mantsch, and R. J. Walker, “Spool Piece Testing Facility”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3325-3327.
- J. Q. Qiu, H. Chen, and C.-X. Tang, “PIC Simulation of the Coaxial Magnetron for Low Energy X-band Linear Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA067, pp. 232-234.
- T. Saito et al., “Thermal Effect in Stability of Cyclotrons”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D065, pp. 244-246.
- G. Jackson, “Measurement of the Resistive Wall Instability in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1755-1758.
- Y. Yamazaki, K. Takata, and S. Tokumoto, “Damping Test of the Higher-Order Modes of the Re-Entrant Accelerating Cavity”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2915-2918.
- F. L. Krawczyk et al., “Design of a 300 GHz Broadband TWT Coupler and RF-Structure”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP84, pp. 794-796.
- G. Terenziani, I. Aviles Santillana, S. Calatroni, T. Junginger, and A. P. Ehiasarian, “Nb Coating Developments with HIPIMS for SRF Applications”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP078, pp. 627-630.
- F. Zimmermann et al., “Present Understanding of Electron Cloud Effects in the Large Hadron Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB054, pp. 1727-1729.
- A. Blas, R. Cappi, R. Garoby, S. Hancock, K. Schindl, and J. L. Vallet, “Beams in the CERN PS Complex after the RF Upgrades for LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP06H, pp. 505-507.
- B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1549-1552.
- A. Harvey, E. Hubbard, M. Schulze, S. Sheynin, D. Barlow, and T. Hunter, “Designs of the Low Energy Intertank Quadrupole Magnets for APT”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA80, pp. 3576-3578.
- S. V. Barabin and G. Bassato, “Design of a Digital Controller for ALPI 80 MHz Resonators”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS007, pp. 174-176.
- A. R. Beck, B. Bru, S. Chel, and Ch. Ricaud, “Six-Dimensional Beam Matching for Axial Injection into a Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G1-01, pp. 432-434.
- P. A. Bystrov, Y. S. Pavlov, O. V. Souvorova, V. P. Filippovich, and N. V. Iluhina, “Effect of Ozone in Experiments on the Development of Food Irradiation Methods”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 240-242.
- R. Takai et al., “Design and Initial Commissioning of Beam Diagnostics for the KEK Compact ERL”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOCYB2, pp. 7-11.
- S. Schreiber, “Results from the free-electron laser FLASH”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper MOYMA02, pp. 16-16.
- R. H. Scott, C. Dickerson, R. C. Pardo, and R. C. Vondrasek, “A New ECRIS Installation at the Argonne Tandem Linac Accelerator System”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 105-107.
- J. L. N. Brito, S. R. Marques, L. A. Martins, and D. O. Tavares, “Development Status of the Sirius Timing System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1007-1010.
- C. Bovet, R. J. Colchester, G. Ferioli, J. J. Gras, R. Jung, and J. M. Vouillot Geneva, “The OTR Screen Betatron Matching Monitor of the CERN SPS”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT11, pp. XX-XX.
- C. R. Ader, C. C. Jensen, R. E. Reilly, D. Snee, and J. H. Wilson, “Recent Experience in the Fabrication and Brazing of Ceramic Beam Tubes for Kicker Magnets at FNAL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC139, pp. 2335-2337.
- A. Blas et al., “The New CERN PS Transverse Damper”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP075, pp. 2183-2185.
- L. Emery, G. I. Fystro, H. Shang, and M. L. Smith, “Beamline-Controlled Steering of Source-Point Angle at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 887-889.
- J. Borburgh, M. Hourican, and M. Thivent, “A New Set of Magnetic Septa in the CERN PS Complex”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP11, pp. 2283-2285.
- A. L. Gabard et al., “A 2.9 Tesla Room Temperature Superbend Magnet for the Swiss Light Source at PSI”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC063, pp. 3038-3040.
- G. Luijckx et al., “Status of the Amsterdam Pulse Stretcher Project (AmPS)”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 589-592.
- C.-S. Hwang, C.-H. Chang, M.-H. Huang, and P. H. Lin, “Magnet Block Arrangements for the Apple-II Elliptically Polarized Undulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN070, pp. 1079-1081.
- E. Samsonov, S. A. Kostromin, N. A. Morozov, and E. Syresin, “Beam Dynamics Simulations in Cyclotron C230 Considering Imperfections of Magnetic Field Radial Component”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3038-3040.
- R. A. Jameson, “Design and Simulation of Practical Alternating-Phase-Focused (APF) Linacs ÔÇô Synthesis and Extension in Tribute to Pioneering Russian APF Research”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOACH02, pp. 12-14.
- C. W. Owen, C. A. Radmer, and D. E. Young, “RF Perturbation Measurements in Long Linac Cavities”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper IV-01, pp. 140-145.
- M. Syha, H. H?ñhnel, U. Ratzinger, and M. Schuett, “New Beam Dynamics Simulations for the FAIR p-Linac RFQ”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 921-924.
- In Soo Ko, “Status of Pohang Light Source”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4C004, pp. 59-63.
- T. Kuo et al., “Initial Test Results from a Multicusp Source for TRIUMF's Radioactive Beam Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2C006, pp. 2675-2677.
Back to search