JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Quaranta, C. Bracco, R. Bruce, and S. Redaelli, “Validation of Simulation Tools for Fast Beam Failure Studies in the LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2506-2509. doi:10.18429/JACoW-IPAC2016-WEPMW033
[n]	C. Vaccarezza et al., “The SPARC_LAB Thomson Source Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 267-270. doi:10.18429/JACoW-IPAC2014-MOPRO078
[n]	T. Hellert et al., “Commissioning Simulation Study for the Accumulator Ring of the Advanced Light Source Upgrade”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1445-1448. doi:10.18429/JACoW-IPAC2019-TUPGW022
[n]	N. Y. Huang et al., “Coherent Synchrotron Radiation Source Based on an Isochronous Accumulator Ring with Femtosecond Electron Bunches”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC036, pp. 2085-2087. 
[n]	S. Di Mitri, “Transverse-emittance Preserving Arc Compressor: Sensitivity to Beam Optics, Charge and Energy”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 48-51. doi:10.18429/JACoW-ERL2015-TUIDLH2040
[n]	P. B. Wilson, “Structures for Superconducting Electron Linacs and RF Separators”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1092-1104. 
[n]	T. Furukawa et al., “Fast Raster Scanning System for HIMAC New Treatment Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA007, pp. 76-78. 
[n]	B. Kehrer et al., “Time-Resolved Energy Spread Studies at the ANKA Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 53-56. doi:10.18429/JACoW-IPAC2017-MOOCB1
[n]	X. Liu, Z. Gao, Y. He, and G. Huang, “AN Effect of Field Emission on Low Beta Superconducting Cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 849-851. doi:10.18429/JACoW-LINAC2018-THPO068
[n]	M. Kobal, P. Medve?ícek, G. Pajor, and I. Verstov?íek, “Photon Beamline Control System as a Product”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper THX02, pp. 221-223. 
[n]	M. R. Bartosik et al., “Beam Loss Monitors for the Cryogenic LHC Magnets”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 139-142. doi:10.18429/JACoW-IBIC2015-MOPB042
[n]	A. Liu, A. D. Bross, and D. V. Neuffer, “Decay Ring Design Updates for nuSTORM”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1565-1567. doi:10.18429/JACoW-IPAC2014-TUPRI006
[n]	J. G. Wang and B. Liu, “Preliminary Results of the Bunch Arrival-Time Monitor at SXFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4787-4790. doi:10.18429/JACoW-IPAC2018-THPML065
[n]	B. Bernstein and I. Smith, “Aurora, an Electron Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 294-301. 
[n]	J. S. MacKay, “Electron Beam Profile, Positron Systems and Measurements on the Daresbury SRS”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 43-46. 
[n]	V. N. Boriskin et al., “Control Power Supply System for Electromagnetic Elements for Tehnological Linac”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP063, pp. XX-XX. 
[n]	H. Podlech et al., “The MYRRHA-RFQ - Status and First Measurements”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2243-2245. doi:10.18429/JACoW-IPAC2017-TUPVA071
[n]	G. Asova et al., “First Results with Tomographic Reconstruction of the Transverse Phase Space at PITZ”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA30, pp. 543-546. 
[n]	X. Buffat, T. Pieloni, C. Tambasco, J. Barranco, and A. Florio, “Simulation of Head-on Beam-Beam Limitations in Future High Energy Colliders”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1430-1433. doi:10.18429/JACoW-IPAC2016-TUPMW009
[n]	T. Yanagisawa et al., “Status of Superconducting Quarter Wave Resonator Development at MHI”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB17, pp. 231-233. 
[n]	B. Babacan et al., “Pre-commissioning of the wide-dynamic range halo monitor to be installed in the Fermilab MI-8 line”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 513-517. doi:10.18429/JACoW-IBIC2025-TUPMO21
[n]	R. A. Kostin et al., “Operation Regime Analysis of Conduction Cooled Cavities Through Multi-Physics Simulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2697-2699. doi:10.18429/JACoW-IPAC2018-WEPML010
[n]	A. Beuret and F. Bordry, “The Control Loops of the High Power D. C. Power Converters of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1197-1200. 
[n]	H. Leboutet, R. Jean, and J. C. Schnuriger, “RF Systems of the CSF 85-Inch Cyclotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 217-222. 
[n]	F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W011, pp. 973-975. 
[n]	J. H. H. Lee, K. J. Boller, T. Denis, M. W. van Dijk, and P. J. M. van der Slot, “Dynamics of a Multi-beam Photonic Free Electron Laser”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD54, pp. 650-653. 
[n]	M. T. Heron and J. Rowland, “A Python Tracking Code and GUI for Control Room Operations”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC159, pp. 2358-2360. 
[n]	K. Kumagai et al., “Optimization of Optics with Four Long Straight Sections of 30 m for SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A05, pp. 1086-1088. 
[n]	D. Einfeld, A. Krussel, and M. Pont, “Magnet Prototypes for ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP01E, pp. 1960-1962. 
[n]	C. Arnaud et al., “Test of the First Full-Size LEP Superconducting Cavity Module”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1076-1079. 
[n]	R. Barday et al., “Field Emission Studies of Heat Treated Mo Substrates”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2955-2957. doi:10.18429/JACoW-IPAC2014-THPRO042
[n]	H. Soltner, M. Pabst, and R. Tolle, “Magnetic Field Calculations of the Superconducting Dipole Magnets for the High- Energy Storage Ring at FAIR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN021, pp. 194-196. 
[n]	H. C. Li et al., “The Purifier System for Helium Cryogenic Plant in NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD002, pp. 2498-2500. 
[n]	B. Bolzon et al., “Intermediate Commissioning Results of the Required 140 mA/100 keV CW D+ ECR Injector of LIPAc, IFMIF's Prototype”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 67-72. doi:10.18429/JACoW-ECRIS2016-WECO01
[n]	Y. Sun and H. Shang, “Preliminary Experimental Investigation of Quasi Achromat Scheme at Advanced Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1800-1802. doi:10.18429/JACoW-IPAC2015-TUPJE070
[n]	S. Golge, A. Freyberger, and C. Hyde-Wright, “A CW Positron Source for CEBAF”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS067, pp. 3133-3135. 
[n]	K. Xuan, C. Li, J. Y. Li, G. Liu, and W. Xu, “Voltage Control for the 4-Th Harmonic Cavity in Hls Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2664-2666. doi:10.18429/JACoW-IPAC2016-WEPOR003
[n]	M. Korostelev et al., “End-to-End Beam Simulations for the New Muon G-2 Experiment at Fermilab”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2408-2411. doi:10.18429/JACoW-IPAC2016-WEPMW001
[n]	L. S?©by, G. Baud, M. Bozzolan, and R. Scrivens, “New Beam Position Monitors for the CERN LINAC3 to LEIR Ion Beam Transfer Line”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 293-296. doi:10.18429/JACoW-IBIC2018-TUPB14
[n]	M. Bergher et al., “Status Report on D. C. I.”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1860-1863. 
[n]	M. H. Foss, “A Three-Dimensional Field Program”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2856-2859. 
[n]	J. W. Wang et al., “Positron Injector Accelerator and RF System for the ILC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA109, pp. 473-475. 
[n]	R. R. Kniaziev and G. V. Sotnikov, “Quasistatic Field Influence on Bunches Focusing by Wakefields in the Plasma-dielectric Waveguide”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA055, pp. 1256-1258. 
[n]	W. Br?ñutigam, H. Beuscher, W. Krauss-Vogt, J. Reich, P. Wucherer, and V. S. Pandit, “Setting up the ISIS Injector System at JULIC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-07, pp. 491-494. 
[n]	J. Brawley, F. Folsom, S. Morgan, B. Jones, R. Bennett, and C. Reece, “CEBAF Experience with In-House Production Fabrication of Niobium Parts”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J01, pp. XX-XX. 
[n]	M.-A. Tordeux, L. Cassinari, O. V. Chubar, J.-C. Denard, D. Pedeau, and B. Pottin, “Ultimate Resolution of Soleil X-Ray Pinhole Camera”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC16, pp. 180-182. 
[n]	G. H. Gillespie et al., “A Multi-Platform Graphic User Interface for the Particle Optics Code MARYLIE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4035, pp. 848-850. 
[n]	G. C. Pappas et al., “Prototyping of the ALS-U Fast Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3637-3639. doi:10.18429/JACoW-IPAC2016-THPMW038
[n]	S. C. Snowdon, “Design of Superconducting High Energy Beam Line Dipole-Magnetostatics”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1257-1260. 
[n]	M. Kago et al., “Design of the Accelerator Safety Interlock System for XFEL in SPring-8”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP096, pp. 588-590. 
[n]	A. F. Hartin, “Incoherent pair background processes with full polarizations at the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN080, pp. 2892-2894. 
[n]	S. Schreiber, B. Faatz, J. Feldhaus, K. Honkavaara, R. Treusch, and M. Vogt, “Status of the FLASH Facility”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD01, pp. 37-40. 
[n]	A. Saini, K. Ranjan, C. S. Mishra, N. Solyak, and V. P. Yakovlev, “Study of Effects of Failure of Beamline Elements & Their Compensation in CW Superconducting Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP006, pp. 1513-1515. 
[n]	X. Liu et al., “Influence of Magnet Errors and Waveguide Permeability on Magnetic Field Performance in Pure Permanent Undulators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA038, pp. 2214-2216. 
[n]	P. Koert, S. Eckhouse, A. Fisher, and N. Rostoker, “Design Criteria for Modified Elongated Betatron Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 972-975. 
[n]	S. Marsching et al., “Status of the FLUTE Control System”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO013, pp. 63-65. 
[n]	E. Huttel, I. Birkel, A.-S. M??ller, N. J. Smale, K. G. Sonnad, and P. Wesolowski, “A Full-Energy-Injector for the ANKA Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP025, pp. 1147-1149. 
[n]	E. D. Hudson, M. L. Mallory, and S. W. Mosko, “High Performance Heavy-Ion Source for Cyclotrons”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 113-118. 
[n]	R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF ÔÇô Project Update”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC094, pp. 318-320. 
[n]	R. M. Main, J. M. Haughian, and R. B. Meuser, “High-Gradient Drift-Tube Quadrupole Magnets”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-03, pp. 153-156. 
[n]	J. H. Yue, Q. Y. Deng, J. Hu, S. J. Wei, and Q. Ye, “Phase and Energy Measurement System for C-ADS Injector I”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 95-97. doi:10.18429/JACoW-IBIC2015-MOPB026
[n]	D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1347-1350. 
[n]	R. M. Franks, O. Alford, and L. R. Bertolini, “"Paper-Less" CAD/CAM for Accelerator Components”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH104, pp. 1450-1452. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search