Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Christou, K. Dunkel, A. Fabris, and V. C. Kempson, “The Diamond Light Source Booster RF System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH120, pp. 1295-1297.
[n] A. V. Fedotov, R. L. Gluckstern, S. S. Kurennoy, and R. Ryne, “Halo Formation in Spheroidal Bunches with Self-Consistent Stationary Distributions”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP15C, pp. 1115-1117.
[n] X. Y. Shi and H. S. Xu, “Design of an LPA-Based First-Stage Injector for a Synchrotron Light Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1639-1643. doi:10.18429/JACoW-IPAC2022-WEOZGD1
[n] W. K. Lau et al., “Development of a High Brightness Photo-Injector for Light Source Research at NSRRC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC071, pp. 229-231.
[n] Y. S. Wong, Y.-C. Chien, C. Y. Liu, K.-B. Liu, and B. S. Wang, “DESIGN STORAGE RING AND BOOSTER RING POWER SUPPLY CABLING IN TAIWAN PHOTON SOURCE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3194-3196. doi:10.18429/JACoW-IPAC2015-WEPHA037
[n] C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 631-634.
[n] M. Dohlus, E. Schneidmiller, and M. V. Yurkov, “Generation of Attosecond Soft X-ray Pulses in a Longitudinal Space Charge Amplifier”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO004, pp. 1449-1451.
[n] D. Li et al., “High Power RF Test of an 805 MHz RF Cavity for a Muon Cooling Channel”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO010, pp. 2160-2162.
[n] N. Malitsky et al., “Joining the RHIC Online and Offline Models”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT003, pp. 880-882.
[n] R. P. Fliller et al., “Results of NSLS-II Linac Commissioning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA083, pp. 2301-2303.
[n] M. T. F. Pivi et al., “Multi-Particle Simulation Codes Implementation to Include Models of a Novel Single-bunch Feedback System and Intra-beam Scattering”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR091, pp. 3147-3149.
[n] B. Ketenoglu et al., “The TAC IR FEL Oscillator Facility Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC38, pp. 580-582.
[n] A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
[n] J. C. McNeur, P. Hommelhoff, M. Kozak, A. Li, N. Sch?Ânenberger, and A. D. Tafel, “Scaling Down Synchronous Acceleration: Recent Results, Current Status, and Future Plans of a Subrelativistic Dielectric Laser Acceleration Project”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1325-1328. doi:10.18429/JACoW-IPAC2015-TUYC3
[n] D. Iglesias et al., “Thermo-mechanical Design of Particle-stopping Devices at the High Energy Beamline Sections of the IFMIF/EVEDA Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS059, pp. 3562-3564.
[n] N. F. Petry, S. Huneck, K. K?â, H. Podlech, U. Ratzinger, and M. Schwarz, “Test of a High Power Room Temperature CH DTL Cavity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2237-2239. doi:10.18429/JACoW-IPAC2017-TUPVA069
[n] A. Degiovanni et al., “Design of a Fast-cycling High-gradient Rotating Linac for Protontherapy”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA008, pp. 3642-3644.
[n] J. F. Cardona, R. Calaga, R. Miyamoto, R. Tomas, and G. Vanbavinckhove, “Comparison of the Action and Phase Analysis on LHC Orbits with Other Techniques”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC004, pp. 2004-2006.
[n] P. Adams, “Beamline Computer Control by Interpreter”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 361-363.
[n] G. Valentino, R. Bruce, A. Langner, S. Redaelli, and R. Tomas, “Comparison of Beam Sizes at the Collimator Locations from Measured Optics and Beam-based Collimator Alignment at the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2101-2104. doi:10.18429/JACoW-IPAC2015-TUPTY040
[n] M. Shimada et al., “Approach to a Start-to-end Simulation of 2-loop Compact Energy Recovery Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAA03, pp. 1909-1911.
[n] J. R. Harris et al., “Longitudinal Dynamics in the University of Maryland Electron Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPC010, pp. 713-715.
[n] P. Arnold, J. Fydrych, W. Hees, J. M. Jurns, X. Wang, and J. G. Weisend, “The ESS Cryogenic System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2756-2758. doi:10.18429/JACoW-IPAC2014-WEPRI109
[n] V. A. Britten, O. Meusel, H. Podlech, and A. Schempp, “Influences of Beam Parameters on the Interaction Between Ion and Electron Beams”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 54-57. doi:10.18429/JACoW-COOL2023-THPOSRP03
[n] C. Steier et al., “Completion of the Brightness Upgrade of the ALS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA075, pp. 261-263.
[n] A. Huschauer et al., “Approaching the High-Intensity Frontier Using the Multi-Turn Extraction at the CERN Proton Synchrotron”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 231-236. doi:10.18429/JACoW-HB2018-WEA1WA02
[n] A. Caruso, “CHOPPER 500 STATUS REPORT”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P27, pp. XX-XX.
[n] D. Reschke, “Challenges in SRF Module Production for the European XFEL”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOIOA01, pp. 2-6.
[n] S. P. Antipov et al., “Metamaterial-loaded Waveguides for Accelerator Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN086, pp. 2906-2908.
[n] M. G. Ibison, K. M. Hock, D. J. Holder, B. D. Muratori, A. Wolski, and M. Korostelev, “Measurements at the ALICE Tomography Section”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC149, pp. 1377-1379.
[n] G. Stern et al., “Development and Validation of a Multipoint Based Laser Alignment System for CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME045, pp. 3028-3030.
[n] N. Sakamoto et al., “Commissioning of a New Injector for the RIKEN RI-Beam Factory”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MO3A02, pp. 125-129.
[n] M. S. Champion, “Stability Issues in Superconducting Radio-Frequency Linear Accelerators”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAY06, pp. XX-XX.
[n] M. J. Sigrist, D. G. Bilbrough, S. Chen, L. O. Dallin, and W. A. Wurtz, “Insertion Device Development at the Canadian Lightsource”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD005, pp. 3090-3092.
[n] D. J. Clark et al., “Beams for Gammasphere at the LBNL 88-Inch Cyclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W024, pp. 1051-1053.
[n] T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
[n] C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731.
[n] J. C. Nugent and V. C. Palladino, “The Physics Programme of next MICE Step IV”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1361-1363. doi:10.18429/JACoW-IPAC2014-TUPME010
[n] A. Gover, “Schemes of Superradiant Emission from Electron Beams and quot;Spin-Flip Emission of Radiationquot;”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOC003, pp. XX-XX.
[n] D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1536-1539.
[n] I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
[n] K. Kojima, M. Chimura, H. Harada, and P. Saha, “Compensation of second-order random resonances in the J-PARC RCS”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4604, unpublished.
[n] F. Langlois et al., “Distributed Fast Acquisitions System for Multi Detector Experiments”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN003, pp. 717-719.
[n] K. W. Shepard et al., “SC Driver Linac for a Rare Isotope Facility”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEA002, pp. 345-351.
[n] C. Ankenbrandt and S. D. Holmes, “Limits on the Transverse Phase Space Density in the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1066-1069.
[n] S. Krishnagopal, S. A. Samant, D. Sarkar, P. Jha, and A. K. Upadhyay, “Study of Self-injection of an Electron Beam in a Laser-driven Plasma Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ025, pp. 2820-2822.
[n] G. Ciavola, L. Celona, F. Chines, S. Gammino, S. Passarello, and C. Campisano, “First Beam from the TRASCO Intense Proton Source (TRIPS) at INFN-LNS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH303, pp. 2406-2408.
[n] K. Ohmi, R. Calaga, W. Hofle, R. Tomas, and F. Zimmermann, “Beam-beam Effects With an External Noise in LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN048, pp. 1496-1498.
[n] M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4062-4065. doi:10.18429/JACoW-IPAC2018-THPMF013
[n] M. Pieck, R. W. Garnett, F. E. Shelley, and B. G. Smith, “MaRIE - Instrumentation & Control System Design Status and Options”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 468-471. doi:10.18429/JACoW-ICALEPCS2015-MOPGF162
[n] M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296.
[n] C. Hessler, E. Chevallay, M. Divall Csatari, S. Doebert, and V. Fedosseev, “Lifetime Studies of Cs2Te Cathodes at the PHIN RF Photoinjector at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD066, pp. 1554-1556.
[n] S. B. van der Geer, O. J. Luiten, M. J. de Loos, G. P?Âplau, and U. van Rienen, “Adaptive Space-charge Meshing in the General Particle Tracer Code”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP133, pp. 1728-1730.
[n] V. I. Balbekov and P. N. Chirkov, “Coupling Resonance 2Qy-2Qx=0 Excited by Sextupolar Magnetic Fields”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 738-741.
[n] F. Sannibale et al., “Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings by a Dispersion Bump in a Wiggler”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1627-1630. doi:10.18429/JACoW-IPAC2019-TUPGW093
[n] R. Andrews, A. Maschke, R. Mobley, and C. H. Rode, “Design of the 200 Ge V Slow Extracted Beam at NAL”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 262-266.
[n] N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
[n] D. W. Storey, R. E. Laxdal, and Z. Y. Yao, “Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4992-4994. doi:10.18429/JACoW-IPAC2018-THPML132
[n] J. Norem, F. Brandeberry, and A. Rauchas, “A Proposed Second Harmonic Acceleration System for the Intense Pulsed Neutron Source Rapid Cycling Synchrotron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3490-3493.
[n] D. Barna, W. Bartmann, M. A. Fraser, and R. Ostojic, “Design and Optimization of Electrostatic Deflectors for ELENA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 382-384. doi:10.18429/JACoW-IPAC2015-MOPJE043
[n] T. Demma, S. Petracca, U. Sannio, F. Ruggiero, G. Rumolo, and F. Zimmermann, “Maps for Electron Clouds: Application to LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH047, pp. 2889-2891.
[n] W. L. Bendel and T. F. Godlove, “Uniform - Field Wedge Magnets: Results”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 385-387.
[n] C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3180-3182. doi:10.18429/JACoW-IPAC2014-THPRO123
[n] G. Papotti et al., “Observation of Bunch to Bunch Differences due to Beam-beam Effects”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ023, pp. 1855-1857.
[n] M. S. Stefani et al., “Magnetized Gridded Thermionic Electron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2140-2143. doi:10.18429/JACoW-IPAC2019-TUPTS093
[n] Y.-M. Shin, P. Piot, D. R. Broemmelsiek, D. J. Crawford, A. H. Lumpkin, and A. T. Green, “Generation of Modulated Bunch Using a Masked Chicane for Beam-Driven Acceleration Experiments at ASTA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 666-668. doi:10.18429/JACoW-IPAC2015-MOPMA051
[n] C. Barue et al., “Status Report on Metallic Beam Production at GANIL/SPIRAL 2”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 92-97. doi:10.18429/JACoW-ECRIS2016-WEPP05
[n] Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
[n] J. R. Calvey, C. M. Celata, J. A. Crittenden, G. Dugan, and M. A. Palmer, “Electron Cloud Modeling Considerations at CesrTA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP047, pp. 3306-3308.
[n] Juras R.C., Meigs M.J., Sinclair J.A., Tatum B.A., “Migration of 1970s Minicomputer Controls to Modern Toolkit Software”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TD1O03, pp. XX-XX.
[n] G. Cavallari et al., “Status Report on SC RF Cavities at CERN”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91A03, pp. XX-XX.
[n] N. Golubeva, V. Balandin, and W. Decking, “Optimal Twiss Parameters for Emittance Measurement in Periodic Transport Channels”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO010, pp. 1898-1900.
[n] J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “Nonlinear Behaviour in the Proposed Lattice of the Daresbury Advanced Photon Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 129-132.
[n] G. Ruggiero, “High-Power FFAG-Based Heavy-Ion And Proton Drivers”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 204-206.
[n] A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
[n] P. Marchand, W. Gloor, M. Pedrozzi, Ph. Br?®dy, and A. Anghel, “Cryogenic System for the SLS Third Harmonic RF Cavity”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO009, pp. 2268-2270.
[n] D. T. Abell, G. I. Bell, E. Forest, A. G. Ruggiero, A. V. Sobol, and D. Trbojevic, “Space-Charge Simulations of Non-Scaling FFAGs Using PTC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU2PBC01, pp. 673-673.
[n] S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1036-1038. doi:10.18429/JACoW-IPAC2015-MOPTY046
[n] Z.-H. Luo, H.-F. Wan, S.-H. Wang, and Q.-Y. Zhuo, “The Beijing 35 MeV Proton Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-02, pp. 31-33.
[n] N. Kazarinov, V. Shevtsov, A. Tuzikov, and Y. Jongen, “Axial Injection Beam-Line Of C400 Cyclotron For Hadron Therapy: Particles Dynamics And Magnetic Field Screening”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 403-405.
[n] R. Nielsen, J. Moenich, and R. Wehrle, “Vacuum Chamber Development for the Synchrotron X-Ray Source at Argonne”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1666-1669.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Christou, K. Dunkel, A. Fabris, and V. C. Kempson, “The Diamond Light Source Booster RF System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH120, pp. 1295-1297.
- A. V. Fedotov, R. L. Gluckstern, S. S. Kurennoy, and R. Ryne, “Halo Formation in Spheroidal Bunches with Self-Consistent Stationary Distributions”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP15C, pp. 1115-1117.
- X. Y. Shi and H. S. Xu, “Design of an LPA-Based First-Stage Injector for a Synchrotron Light Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1639-1643.
- W. K. Lau et al., “Development of a High Brightness Photo-Injector for Light Source Research at NSRRC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC071, pp. 229-231.
- Y. S. Wong, Y.-C. Chien, C. Y. Liu, K.-B. Liu, and B. S. Wang, “DESIGN STORAGE RING AND BOOSTER RING POWER SUPPLY CABLING IN TAIWAN PHOTON SOURCE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3194-3196.
- C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 631-634.
- M. Dohlus, E. Schneidmiller, and M. V. Yurkov, “Generation of Attosecond Soft X-ray Pulses in a Longitudinal Space Charge Amplifier”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO004, pp. 1449-1451.
- D. Li et al., “High Power RF Test of an 805 MHz RF Cavity for a Muon Cooling Channel”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO010, pp. 2160-2162.
- N. Malitsky et al., “Joining the RHIC Online and Offline Models”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT003, pp. 880-882.
- R. P. Fliller et al., “Results of NSLS-II Linac Commissioning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA083, pp. 2301-2303.
- M. T. F. Pivi et al., “Multi-Particle Simulation Codes Implementation to Include Models of a Novel Single-bunch Feedback System and Intra-beam Scattering”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR091, pp. 3147-3149.
- B. Ketenoglu et al., “The TAC IR FEL Oscillator Facility Project”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC38, pp. 580-582.
- A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268.
- J. C. McNeur, P. Hommelhoff, M. Kozak, A. Li, N. Sch?Ânenberger, and A. D. Tafel, “Scaling Down Synchronous Acceleration: Recent Results, Current Status, and Future Plans of a Subrelativistic Dielectric Laser Acceleration Project”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1325-1328.
- D. Iglesias et al., “Thermo-mechanical Design of Particle-stopping Devices at the High Energy Beamline Sections of the IFMIF/EVEDA Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS059, pp. 3562-3564.
- N. F. Petry, S. Huneck, K. K?â, H. Podlech, U. Ratzinger, and M. Schwarz, “Test of a High Power Room Temperature CH DTL Cavity”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2237-2239.
- A. Degiovanni et al., “Design of a Fast-cycling High-gradient Rotating Linac for Protontherapy”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA008, pp. 3642-3644.
- J. F. Cardona, R. Calaga, R. Miyamoto, R. Tomas, and G. Vanbavinckhove, “Comparison of the Action and Phase Analysis on LHC Orbits with Other Techniques”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC004, pp. 2004-2006.
- P. Adams, “Beamline Computer Control by Interpreter”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 361-363.
- G. Valentino, R. Bruce, A. Langner, S. Redaelli, and R. Tomas, “Comparison of Beam Sizes at the Collimator Locations from Measured Optics and Beam-based Collimator Alignment at the LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2101-2104.
- M. Shimada et al., “Approach to a Start-to-end Simulation of 2-loop Compact Energy Recovery Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOAA03, pp. 1909-1911.
- J. R. Harris et al., “Longitudinal Dynamics in the University of Maryland Electron Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPC010, pp. 713-715.
- P. Arnold, J. Fydrych, W. Hees, J. M. Jurns, X. Wang, and J. G. Weisend, “The ESS Cryogenic System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2756-2758.
- V. A. Britten, O. Meusel, H. Podlech, and A. Schempp, “Influences of Beam Parameters on the Interaction Between Ion and Electron Beams”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP03, pp. 54-57.
- C. Steier et al., “Completion of the Brightness Upgrade of the ALS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA075, pp. 261-263.
- A. Huschauer et al., “Approaching the High-Intensity Frontier Using the Multi-Turn Extraction at the CERN Proton Synchrotron”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 231-236.
- A. Caruso, “CHOPPER 500 STATUS REPORT”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P27, pp. XX-XX.
- D. Reschke, “Challenges in SRF Module Production for the European XFEL”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOIOA01, pp. 2-6.
- S. P. Antipov et al., “Metamaterial-loaded Waveguides for Accelerator Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN086, pp. 2906-2908.
- M. G. Ibison, K. M. Hock, D. J. Holder, B. D. Muratori, A. Wolski, and M. Korostelev, “Measurements at the ALICE Tomography Section”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC149, pp. 1377-1379.
- G. Stern et al., “Development and Validation of a Multipoint Based Laser Alignment System for CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME045, pp. 3028-3030.
- N. Sakamoto et al., “Commissioning of a New Injector for the RIKEN RI-Beam Factory”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MO3A02, pp. 125-129.
- M. S. Champion, “Stability Issues in Superconducting Radio-Frequency Linear Accelerators”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAY06, pp. XX-XX.
- M. J. Sigrist, D. G. Bilbrough, S. Chen, L. O. Dallin, and W. A. Wurtz, “Insertion Device Development at the Canadian Lightsource”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD005, pp. 3090-3092.
- D. J. Clark et al., “Beams for Gammasphere at the LBNL 88-Inch Cyclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W024, pp. 1051-1053.
- T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
- C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3728-3731.
- J. C. Nugent and V. C. Palladino, “The Physics Programme of next MICE Step IV”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1361-1363.
- A. Gover, “Schemes of Superradiant Emission from Electron Beams and quot;Spin-Flip Emission of Radiationquot;”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOC003, pp. XX-XX.
- D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1536-1539.
- I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
- K. Kojima, M. Chimura, H. Harada, and P. Saha, “Compensation of second-order random resonances in the J-PARC RCS”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4604, this conference.
- F. Langlois et al., “Distributed Fast Acquisitions System for Multi Detector Experiments”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKN003, pp. 717-719.
- K. W. Shepard et al., “SC Driver Linac for a Rare Isotope Facility”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEA002, pp. 345-351.
- C. Ankenbrandt and S. D. Holmes, “Limits on the Transverse Phase Space Density in the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1066-1069.
- S. Krishnagopal, S. A. Samant, D. Sarkar, P. Jha, and A. K. Upadhyay, “Study of Self-injection of an Electron Beam in a Laser-driven Plasma Cavity”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ025, pp. 2820-2822.
- G. Ciavola, L. Celona, F. Chines, S. Gammino, S. Passarello, and C. Campisano, “First Beam from the TRASCO Intense Proton Source (TRIPS) at INFN-LNS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH303, pp. 2406-2408.
- K. Ohmi, R. Calaga, W. Hofle, R. Tomas, and F. Zimmermann, “Beam-beam Effects With an External Noise in LHC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN048, pp. 1496-1498.
- M. Pont et al., “The Stripline Kicker Prototype for the CLIC Damping Rings at ALBA: Installation, Commissioning and Beam Characterisation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4062-4065.
- M. Pieck, R. W. Garnett, F. E. Shelley, and B. G. Smith, “MaRIE - Instrumentation & Control System Design Status and Options”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 468-471.
- M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296.
- C. Hessler, E. Chevallay, M. Divall Csatari, S. Doebert, and V. Fedosseev, “Lifetime Studies of Cs2Te Cathodes at the PHIN RF Photoinjector at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD066, pp. 1554-1556.
- S. B. van der Geer, O. J. Luiten, M. J. de Loos, G. P?Âplau, and U. van Rienen, “Adaptive Space-charge Meshing in the General Particle Tracer Code”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP133, pp. 1728-1730.
- V. I. Balbekov and P. N. Chirkov, “Coupling Resonance 2Qy-2Qx=0 Excited by Sextupolar Magnetic Fields”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 738-741.
- F. Sannibale et al., “Compensation of Insertion Device Induced Emittance Variations in Ultralow Emittance Storage Rings by a Dispersion Bump in a Wiggler”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1627-1630.
- R. Andrews, A. Maschke, R. Mobley, and C. H. Rode, “Design of the 200 Ge V Slow Extracted Beam at NAL”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 262-266.
- N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
- D. W. Storey, R. E. Laxdal, and Z. Y. Yao, “Cryogenic Performance of an SRF Deflecting Cavity Fabricated Using Alternative Techniques for the ARIEL eLinac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4992-4994.
- J. Norem, F. Brandeberry, and A. Rauchas, “A Proposed Second Harmonic Acceleration System for the Intense Pulsed Neutron Source Rapid Cycling Synchrotron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3490-3493.
- D. Barna, W. Bartmann, M. A. Fraser, and R. Ostojic, “Design and Optimization of Electrostatic Deflectors for ELENA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 382-384.
- T. Demma, S. Petracca, U. Sannio, F. Ruggiero, G. Rumolo, and F. Zimmermann, “Maps for Electron Clouds: Application to LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH047, pp. 2889-2891.
- W. L. Bendel and T. F. Godlove, “Uniform - Field Wedge Magnets: Results”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 385-387.
- C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3180-3182.
- G. Papotti et al., “Observation of Bunch to Bunch Differences due to Beam-beam Effects”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ023, pp. 1855-1857.
- M. S. Stefani et al., “Magnetized Gridded Thermionic Electron Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2140-2143.
- Y.-M. Shin, P. Piot, D. R. Broemmelsiek, D. J. Crawford, A. H. Lumpkin, and A. T. Green, “Generation of Modulated Bunch Using a Masked Chicane for Beam-Driven Acceleration Experiments at ASTA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 666-668.
- C. Barue et al., “Status Report on Metallic Beam Production at GANIL/SPIRAL 2”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 92-97.
- Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
- J. R. Calvey, C. M. Celata, J. A. Crittenden, G. Dugan, and M. A. Palmer, “Electron Cloud Modeling Considerations at CesrTA”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP047, pp. 3306-3308.
- Juras R.C., Meigs M.J., Sinclair J.A., Tatum B.A., “Migration of 1970s Minicomputer Controls to Modern Toolkit Software”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TD1O03, pp. XX-XX.
- G. Cavallari et al., “Status Report on SC RF Cavities at CERN”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91A03, pp. XX-XX.
- N. Golubeva, V. Balandin, and W. Decking, “Optimal Twiss Parameters for Emittance Measurement in Periodic Transport Channels”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO010, pp. 1898-1900.
- J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “Nonlinear Behaviour in the Proposed Lattice of the Daresbury Advanced Photon Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 129-132.
- G. Ruggiero, “High-Power FFAG-Based Heavy-Ion And Proton Drivers”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 204-206.
- A. Shemyakin et al., “Fermilab Electron Cooling Project: Commissioning of the 5 MeV Recirculation Test Set-up”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH046, pp. 2548-2550.
- P. Marchand, W. Gloor, M. Pedrozzi, Ph. Br?®dy, and A. Anghel, “Cryogenic System for the SLS Third Harmonic RF Cavity”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO009, pp. 2268-2270.
- D. T. Abell, G. I. Bell, E. Forest, A. G. Ruggiero, A. V. Sobol, and D. Trbojevic, “Space-Charge Simulations of Non-Scaling FFAGs Using PTC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU2PBC01, pp. 673-673.
- S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1036-1038.
- Z.-H. Luo, H.-F. Wan, S.-H. Wang, and Q.-Y. Zhuo, “The Beijing 35 MeV Proton Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-02, pp. 31-33.
- N. Kazarinov, V. Shevtsov, A. Tuzikov, and Y. Jongen, “Axial Injection Beam-Line Of C400 Cyclotron For Hadron Therapy: Particles Dynamics And Magnetic Field Screening”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 403-405.
- R. Nielsen, J. Moenich, and R. Wehrle, “Vacuum Chamber Development for the Synchrotron X-Ray Source at Argonne”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1666-1669.
Back to search