Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Walter et al., “Alignment and Steering for Injection and Multi-Turn Operation of the University of Maryland Electron Ring (UMER)”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE021, pp. 1709-1711.
[n] V. N. Kanunnikov and V. A. Papadichev, “A Comparison of Various Geometries of a Separated-Sector Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 384-393.
[n] F. B. Kroes et al., “Improvement of the 400 kV Linac Electron Source of AmPS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1032-1035.
[n] P. Morgan, “Accelerator Energy Conservation at Fermilab”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 851-854.
[n] G. R. D. Plateau et al., “Optimization and Single-Shot Characterization of Ultrashort THz Pulses from a Laser Plasma Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP008, pp. 4548-4550.
[n] G. Valentino, R. W. Assmann, S. Redaelli, and N. J. Sammut, “LHC Collimator Alignment Operational Tool”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC120, pp. 860-863.
[n] J. Ozelis, “Performance of Medium-Beta Elliptical Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP07, pp. 133-133.
[n] S. S. Kurennoy and R. E. Shafer, “Electromagnetic Modeling of Beam Position Monitors for SNS Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A08, pp. 1768-1770.
[n] Y.l. Wang, Lai Oi-ji, N.g. Yao, “A Monitor Having Lots of Functions for a Linac with Feedback”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2183-2186.
[n] I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3147-3150. doi:10.18429/JACoW-IPAC2023-WEPL018
[n] R. G. Alsmiller, F. S. Alsmiller, and J. Barish, “Calculations Pertaining to the Design of a Prebuncher for a 150-MeV Electron Linear Accelerator: II Radial Motion”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3695-3698.
[n] V. A. Moiseev, “Simulation of the Transverse Microwave Instability of an Intense Ion Beam”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP11F, pp. 1218-1220.
[n] J. L. Bobin, G. Giardino, and E. Mercier, “On the Magnetic Compression of Electron Beams in E.B.I.S. or E.B.I.T.”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3202-3205.
[n] G. Bienvenu, “Behaviour of Warm Accelerating RF Structures Under High Gradient”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 970-973.
[n] N. Vinokurov and Y. U. Jeong, “The Generator of High-power Short Terahertz Pulses”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THOB03, pp. 535-538.
[n] G. V. Ivanenkov, E. G. Krastelev, A. G. Mozgovoy, and M. Yu. Solovyev, “A POS Hall Model”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1076-1079.
[n] H. Bohmer, M. Z. Caponi, and J. Munch, “A Free Electron Laser Experiment”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3830-3833.
[n] M. Ferianis, “FERMI@elettra Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper MOO2A03, pp. 20-23.
[n] R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 632-634.
[n] M. Filtz and H. Henke, “RF Parameters for Rectangular Accelerating Structures”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP27G, pp. 1180-1182.
[n] D. A. Walsh, W. A. Gillespie, and S. P. Jamison, “A Femtosecond Resolution Electro-optic Diagnostic Using a Nanosecond-pulse Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO89, pp. 447-451.
[n] J. K. Boyd, “Emittance Measurement in a Magnetic Field”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 437-440.
[n] A. Dipace, A. Doria, G. P. Gallerano, and E. Sabia, “Waveguide-gap Tapering of a Far Infrared FEL”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 614-617.
[n] E. G. Bessonov and K. J. Kim, “Radiative Ion Cooling”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP072L, pp. 1196-1198.
[n] D. Gassner, P. Cameron, C. Mi, and R. L. Witkover, “Spallation Neutron Source Beam Loss Monitor System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB017, pp. 2447-2449.
[n] H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
[n] O. Piquet and M. Luong, “Modelling and Simulation of the RF System for SPIRAL2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP070, pp. 2168-2170.
[n] D. A. Dohan and M. M. Mouat, “High Level Extensions to the TRIUMF Central Control System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-03, pp. 414-417.
[n] J. C. Smith, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Recent Progress on the Design of a Rotatable Copper Collimator for the LHC Collimation Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP030, pp. 2853-2855.
[n] M. Schmoekel, A. Matheisen, B. Petersen, N. Steinhau-Kuehl, and H. Weitkamper, “Update on EP Experiences at DESY with the Electro Polishing Process at DESY 1.3 GHz”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP31, pp. XX-XX.
[n] J. Gutleber and R. Moser, “The MedAustron Accelerator Control System: Design, Installation and Commissioning”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOAAB04, pp. 494-497.
[n] V. E. Hart and E. W. Colston, “Installation and Alignment of LAMPF 201 MHz and 805 MHz Linac Tanks”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P11, pp. 358-364.
[n] J. Resta-L??pez and A. Faus-Golfe, “Nonlinear Post-Linac Energy Collimation System for the Compact Linear Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR017, pp. 1846-1848.
[n] J. Pfingstner and D. Schulte, “On-Line Dispersion Free Steering for the Main Linac of CLIC”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB007, pp. 13-15.
[n] S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
[n] L.-H. Yu, “Remembering Samuel Krinsky”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOA01, pp. XX-XX.
[n] S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181.
[n] F. Schutte, H. L. Hagedoorn, G. C. L. van Heusden, and A. J. M. van Vliet, “The Automatic Control of the Eindhoven A.V.F. Cyclotron II: Measurements”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 524-531.
[n] T. V. Shaftan and I. Pinayev, “Synchrotron Radiation Diagnostics for the NSLS Booster”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH062, pp. 1154-1156.
[n] M. Pekeler, “High Gradients in Superconducting RF Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D04, pp. 822-829.
[n] D. Celeste, E. Bravin, S. Burger, and F. Roncarolo, “Development and Test of a Beam Imaging System Based on Radiation Tolerant Optical Fiber Bundles”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2658-2660. doi:10.18429/JACoW-IPAC2019-WEPGW078
[n] E. Kako et al., “Advances and Performance of Input Couplers at KEK”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOBAU02, pp. 485-490.
[n] A. Blednykh et al., “Beam-Induced Heating of the Kicker Ceramics Chambers at NSLS-II”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 599-601. doi:10.18429/JACoW-NAPAC2016-TUPOB50
[n] P. Chen, “Disruption Effects from the Collision of Quasi-Flat Beams”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 617-620.
[n] M. Boscolo et al., “Beam Dynamics Studies for the SPARXINO Linac”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP015, pp. XX-XX.
[n] D. Li, A. S. Ladran, D. Lozano, and R. A. Rimmer, “Mechanical and Thermal Analysis of Beryllium Windows for RF Cavities in a Muon Cooling Channel”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO009, pp. 2163-2165.
[n] Y. J. Suh et al., “SLED Tuning Control System for PAL-XFEL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1452. doi:10.18429/JACoW-ICALEPCS2019-WEPHA150
[n] G. Seidel, “Operation of the High Intensity Proton Beam Facility at PSI”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD01, pp. 329-332.
[n] E. S. Rodger and H. L. Weisberg, “An Improved Copper Septum Magnet Design”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2832-2833.
[n] V. A. Koshelev et al., “Design of 4-vane RFQ with Magnetic Coupling Windows for Nuclotron Injector Lu-20”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 575-577. doi:10.18429/JACoW-LINAC2016-TUPLR050
[n] D. A. Shkitov, A. E. Harisova, and Y. N. Sutygina, “Simulation of Single Particle Dynamics in a Compact Planar Wiggler”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3458-3460. doi:10.18429/JACoW-IPAC2016-THPMR034
[n] E. Schneidmiller and M. V. Yurkov, “Circular Polarization Control by Reverse Undulator Tapering”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOC01, pp. 297-299.
[n] S. Choroba, J. Hameister, and S. Jarylkapov, “Performance of an S-Band Klystron at an Output Power of 200MW”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4066, pp. 917-919.
[n] C. H. Kuo et al., “Fast Orbit Feedback System Commissioning of the Taiwan Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP009, pp. 3965-3967.
[n] A. Nilsson and P. Carle, “Calculations of EDDY-Current Effects in a Ramped Dipole Field”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1298-1300.
[n] K. Ohmi and F. Zimmermann, “Study of Beam-beam Effects in FCC-he”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2010-2012. doi:10.18429/JACoW-IPAC2015-TUPTY007
[n] V. Chohan, “Operation for LHC Cryomagnet Tests: Concerns, Challenges amp; Successful Collaboration”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUZMA02, pp. 84-88.
[n] P. Belochitskii, “ELENA Project Status”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THPM1HA02, pp. 192-196.
[n] J. M. Koch, F. Epaud, G. Gautier, E. Plouviez, and F. Uberto, “New Fast Orbit Feedback Architecture Based on Libera Brilliance Devices for the ESRF Storage Ring”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THB004, pp. 653-655.
[n] C.-Y. Tan, “Novel Tune Diagnostics for the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAD002, pp. 140-144.
[n] I. Reyzl, “Simulation of Feedback for Orbit Correction”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP043L, pp. 1887-1889.
[n] D. A. White and M. L. Stowell, “Discretizing Transient Curent Densities in the Maxwell Equations”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TH1IODN04, pp. 212-217.
[n] A. I. Borodich, “Transverse Nonlinear Focusing of Nonstationary Space Charge Dominated Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP159, pp. 1869-1871.
[n] S. Shiraishi and R. Tesarek, “Diffusion in Tevatron Using Flying Wire”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP007, pp. 3199-3201.
[n] J. Galambos, “High Power Proton Beam Targets: Technological Evolution, Current Challenges, and the Future”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1075-1079. doi:10.18429/JACoW-IPAC2016-TUZB01
[n] C.-Y. Tan, “New Multithreaded Code for Calculating Longitudinal Collective Instabilities Using Computers with Multiprocessors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH085, pp. 3039-3041.
[n] R.-D. Kohaupt and I. Reyzl, “Fast Feedback Systems for Orbit Correction in the TESLA Linear Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA41, pp. 1171-1173.
[n] N. Li, “Structures of Quadrupole Magnet Core”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA010, pp. 640-642.
[n] A. I. Borodich and I. A. Volkov, “Optimal Transport of Nonstationary High Intensity Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP160, pp. 1872-1874.
[n] T. K. Charles and A. Castilla, “Preliminary Investigation into Accelerators for In-Situ Cultural Heritage Research”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2605-2608. doi:10.18429/JACoW-IPAC2021-WEPAB012
[n] H. Hotchi, “Operational Experience at J-PARC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1A03, pp. 276-280.
[n] R. Scrivens, “Proton and Ion Sources for High Intensity Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYLH01, pp. 103-107.
[n] B. Liu and C.-Y. Tsai, “Particle tracking simulation and semi-analytical Vlasov calculation of CSR induced microbunching instability in a non-symmetric S-type four-dipole bunch compressor chicane”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS38, unpublished.
[n] R. C. Webber, “Fermilab Booster Low Level RF System Upgrades”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ10, pp. 2687-2689.
[n] T. Roser, “Polarized Proton Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAG02, pp. 3154-3158.
[n] Arnaudon L., “Remote Data Acquisition for SPS 352 MHz Superconducting Cavities”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P42, pp. XX-XX.
[n] M. Ebert and F.-R. Ullrich, “Glycol-Substitute for High Power RF Water Loads”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT003, pp. 841-843.
[n] Poulsen S., “An Industrial Control System for the Supervision of the CERN Electrical Distribution Network”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TA2O02, pp. XX-XX.
[n] Z. Z. Zhou et al., “The SILF Accelerator Controls Plan”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 449-451. doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO35
[n] M. R. Jana et al., “Investigation of Breakdown Induced Surface Damage on 805 MHz Pill Box Cavity Interior Surfaces”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA12, pp. 1007-1009.
[n] D. J. Novak, K. J. Bunnell, C. Dickerson, and D. Stanton, “Teaching an Old Accelerator New Tricks”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1545-1546. doi:10.18429/JACoW-ICALEPCS2023-THPDP082
[n] K.-U. Kasemir, “Control System Studio Applications”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROPB02, pp. 692-694.
[n] Q. Y. Guo, “Radiation Shielding Design for Huts of HEPS Beamlines”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper WEPPP017, unpublished.
[n] N. V. Lazarev et al., “CONSTRUCTION OF SMALL-SCALE MULTIPURPOSE ADS AT ITEP”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP053, pp. XX-XX.
[n] A. Fiebig and S. Luegert, “A Radiofrequency Pulse Compressor for Square Output Pulses in the Microsecond Range”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1240-1242.
[n] B. Kalantari, E. Johansen, W. Koprek, P. Pollet, and G. Theidel, “CompactPCI-Serial Hardware Toolbox for SLS 2.0”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper TUAL01, unpublished.
[n] S. Michizono, S. Anami, T. Kobayashi, and S. Yamaguchi, “Digital Feedback System for J-Parc Linac RF Source”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP57, pp. 742-744.
[n] R. Nagai et al., “Performance of a Conventional Analog Phi-A Type Low-Level RF Controller”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH006, pp. 316-318.
[n] J. W. Kwon, G. D. Kim, and E. H. Lim, “Beam Based Calibration of Button Type Beam Position Monitor at MEBT of RAON”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper WEP11, unpublished.
[n] N. Balal, V. L. Bratman, A. Friedman, and Yu. Lurie, “Capabilities of Terahertz Super-Radiance from Electron Bunches Moving in Micro-Undulators”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 517-520. doi:10.18429/JACoW-FEL2019-WEP086
[n] L. H. J. Bozyk, Sh. Ahmed, and P. J. Spiller, “The First-of-Series SIS100 Cryocatcher”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 930-933. doi:10.18429/JACoW-IPAC2018-TUPAF084
[n] D. Weiss, M. Mapes, J. E. Tuozzolo, and S. Verd??-Andr?®s, “EIC Hadron Beamline Vacuum Studies”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3060-3063. doi:10.18429/JACoW-IPAC2021-WEPAB189
[n] M. Parkin et al., “A Helium-Cooled Target Design at the SPS Beam Dump Facility (BDF) at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4109, unpublished.
[n] M. L. Mallory, E. D. Hudson, and R. S. Lord, “Isochronous Cyclotron Harmonic Beam Experiments”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1694-1697.
[n] D. H. Kwak, S. G. Arutunian, M. Chung, G. S. Harutyunyan, E. G. Lazareva, and A. V. Margaryan, “Double-Wire Vibrating Wire Monitor (DW-VWM) for Beam Halo Monitoring in High-intensity Accelerators”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 373-376. doi:10.18429/JACoW-IBIC2019-TUPP028
[n] K. Bane et al., “High-Intensity Single Bunch Instability Behavior In The New SLC Damping Ring Vacuum Chamber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC17, pp. 3109-3111.
[n] O. Karamyshev, “New Design of Cyclotron for Proton Therapy”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2973-2976. doi:10.18429/JACoW-IPAC2022-THPOMS015
[n] C. Zong, “Optimization design of photoneutron source for detecting dissolved substances in aqueous solutions”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPC60, unpublished.
[n] R. Charak and S. Gautam, “Optimizing magnetic anisotropy and tunnel magnetoresistance in CoFe₂O₄/MgO bilayers through SHI processing”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB110, unpublished.
[n] R. C. Webber, “Overview and Status of Beam Instrumentation at the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2094-2097.
[n] C. I. Briegel, “Multi-Processor Network Implementations in Multibus II and VME”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 295-298. doi:10.18429/JACoW-ICALEPCS1991-S08NC02
[n] R. Yang, “Improving the dynamic range of a wire scanner up to 1e+7”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG47, unpublished.
[n] M. Adachi, R. Kato, T. Shioya, and K. Tsuchiya, “Development of compact magnetic field measurement system available for in-vacuum undulators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1449-1451. doi:10.18429/JACoW-IPAC2017-TUPAB055
[n] N. R. Lobanov and D. C. Weisser, “From Multistub Resonators to Intermodulation Measurements: SRF Activities at ANU in 2005-2007”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP59, pp. XX-XX.
[n] W. Ebeling et al., “The Radiofrequency-Systems of PIA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2898-2901.
[n] M. Bertucci et al., “Preliminary BCP Flow Field Investigation by CFD Simulations and PIV in a Transparent Model of a SRF Elliptical Low Beta Cavity”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1204-1207. doi:10.18429/JACoW-IPAC2021-MOPAB394
[n] C. Mingioni et al., “Design of the ANTHEM RFQ mechanical supports”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2677-2679. doi:10.18429/JACoW-IPAC2025-THPB098
[n] Y. He, Y. Li, M. A. Palmer, and D. H. Rice, “Thermal Analysis of the Al Window for a New CESR-c Luminosity Monitor”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE030, pp. 2137-2139.
[n] E. Acerbi, F. Alessandria, and L. Rossi, “Possible Movements of the Milan Superconducting Coils Under the Influence of Mechanical Stresses”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B14, pp. 71-74.
[n] K. Fong, D. A. Dohan, R. Hutcheon, and V. Pacak, “Model Study on the Reduction of RF Leakage in the TRIUMF Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2939-2942.
[n] C. W. Schmidt, “The Fermilab 400-MeV Linac Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1655-1660.
[n] F. Zimmermann and M. A. Valdivia Garc?â, “Optimized Monochromatization for Direct Higgs Production in Future Circular e+e- Colliders”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2950-2953. doi:10.18429/JACoW-IPAC2017-WEPIK015
[n] S. Lorenz et al., “Development of gas target systems for laser-plasma accelerators”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP3030, unpublished.
[n] S. Mattiello, A. Penirschke, and H. Schlarb, “THz Generation by Optical Rectification for a Novel Shot to Shot Synchronization System Between Electron Bunches and Femtosecond Laser Pulses in a Plasma Wakefield Accelerator”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 555-559. doi:10.18429/JACoW-IBIC2019-WEPP018
[n] F. E. Carroll, “Medical Uses of Monochromatic X-Rays”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG04, pp. 80-82.
[n] R. Paparella et al., “Successful Qualification of the Coaxial Blade Tuner”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP018, pp. 818-820.
[n] K. Zhang, C. Feng, and Y. Kang, “Continuous THz Band Coverage through Precise Electron Beam Tailoring in Free-electron Lasers”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2648, unpublished.
[n] H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
[n] D. Kanjilal, “Rapid Growth of SRF in India”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUAA04, pp. 467-473.
[n] A. Gerasimov, “Nonlinear Evolution of Longitudinal Bunched-Beam Instabilities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3276-3279.
[n] M. Ehrlichman, “Accelerator-based lithography and the Induction Storage Ring Light Source”, presented at the IPAC'26, Deauville, France, May 2026, paper WEI8M01, unpublished.
[n] Z. Chen, “Finite Element Analysis And Frequency Shift Studies for The Bridge Coupler of The Coupled Cavity Linear Accelerator of The Spallation Neutron Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE023, pp. 882-884.
[n] Swarn Kalsi, Richard Heese, “Calculation of Eddy-currents Induced in a Compact Synchrotron Superconductiong Magnet Structure During a Current Ramp”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2658-2661.
[n] S. Lueders, “Update on the CERN Computing and Network Infrastructure for Controls (CNIC)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB38, pp. 472-474.
[n] P. Malmborg, “Preparations for Parasitic Production of Biomedically Useful Positron-Emitters”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3313-3316.
[n] F. Peauger et al., “Wakefield Monitor Development for CLIC Accelerating Structure”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP098, pp. 641-643.
[n] E. P. Lee, “The High Temperature Experiment for Accelerator Inertial Fusion”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3335-3338.
[n] Kosuge T., Abe I., Kisiro J., Kurokawa S., Mutoh M., Nigorikawa K., “Application Server and Pushing Technology on COACK-II”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P51, pp. XX-XX.
[n] W. Zhang et al., “Investigation of outgassing properties of CuZr and CuCrZr vacuum pipe”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB010, unpublished.
[n] S. Tazzari, “The European Synchrotron Radiation Facility”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3400-3403.
[n] T. J. Ruth, V. Leung, and P. Malmborg, “Extraction of 11C from the TRIUMF 500 MeV Isotope Production Facility Cooling Water”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3333-3335.
[n] W. Yuan ling, “An Electron Linear Accelerator Having an Ideal Beam Loading Characteristic”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3256-3259.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Walter et al., “Alignment and Steering for Injection and Multi-Turn Operation of the University of Maryland Electron Ring (UMER)”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE021, pp. 1709-1711.
- V. N. Kanunnikov and V. A. Papadichev, “A Comparison of Various Geometries of a Separated-Sector Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 384-393.
- F. B. Kroes et al., “Improvement of the 400 kV Linac Electron Source of AmPS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1032-1035.
- P. Morgan, “Accelerator Energy Conservation at Fermilab”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 851-854.
- G. R. D. Plateau et al., “Optimization and Single-Shot Characterization of Ultrashort THz Pulses from a Laser Plasma Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP008, pp. 4548-4550.
- G. Valentino, R. W. Assmann, S. Redaelli, and N. J. Sammut, “LHC Collimator Alignment Operational Tool”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC120, pp. 860-863.
- J. Ozelis, “Performance of Medium-Beta Elliptical Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP07, pp. 133-133.
- S. S. Kurennoy and R. E. Shafer, “Electromagnetic Modeling of Beam Position Monitors for SNS Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A08, pp. 1768-1770.
- Y.l. Wang, Lai Oi-ji, N.g. Yao, “A Monitor Having Lots of Functions for a Linac with Feedback”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2183-2186.
- I. Martin and B. Nicholson, “Analysis of the Diamond-II booster dipole magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL018, pp. 3147-3150.
- R. G. Alsmiller, F. S. Alsmiller, and J. Barish, “Calculations Pertaining to the Design of a Prebuncher for a 150-MeV Electron Linear Accelerator: II Radial Motion”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3695-3698.
- V. A. Moiseev, “Simulation of the Transverse Microwave Instability of an Intense Ion Beam”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP11F, pp. 1218-1220.
- J. L. Bobin, G. Giardino, and E. Mercier, “On the Magnetic Compression of Electron Beams in E.B.I.S. or E.B.I.T.”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3202-3205.
- G. Bienvenu, “Behaviour of Warm Accelerating RF Structures Under High Gradient”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 970-973.
- N. Vinokurov and Y. U. Jeong, “The Generator of High-power Short Terahertz Pulses”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THOB03, pp. 535-538.
- G. V. Ivanenkov, E. G. Krastelev, A. G. Mozgovoy, and M. Yu. Solovyev, “A POS Hall Model”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1076-1079.
- H. Bohmer, M. Z. Caponi, and J. Munch, “A Free Electron Laser Experiment”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3830-3833.
- M. Ferianis, “FERMI@elettra Diagnostics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper MOO2A03, pp. 20-23.
- R. L. Martin, “Comments on Superconducting Synchrotrons”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 632-634.
- M. Filtz and H. Henke, “RF Parameters for Rectangular Accelerating Structures”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP27G, pp. 1180-1182.
- D. A. Walsh, W. A. Gillespie, and S. P. Jamison, “A Femtosecond Resolution Electro-optic Diagnostic Using a Nanosecond-pulse Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO89, pp. 447-451.
- J. K. Boyd, “Emittance Measurement in a Magnetic Field”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 437-440.
- A. Dipace, A. Doria, G. P. Gallerano, and E. Sabia, “Waveguide-gap Tapering of a Far Infrared FEL”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 614-617.
- E. G. Bessonov and K. J. Kim, “Radiative Ion Cooling”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP072L, pp. 1196-1198.
- D. Gassner, P. Cameron, C. Mi, and R. L. Witkover, “Spallation Neutron Source Beam Loss Monitor System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB017, pp. 2447-2449.
- H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
- O. Piquet and M. Luong, “Modelling and Simulation of the RF System for SPIRAL2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP070, pp. 2168-2170.
- D. A. Dohan and M. M. Mouat, “High Level Extensions to the TRIUMF Central Control System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-03, pp. 414-417.
- J. C. Smith, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Recent Progress on the Design of a Rotatable Copper Collimator for the LHC Collimation Upgrade”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP030, pp. 2853-2855.
- M. Schmoekel, A. Matheisen, B. Petersen, N. Steinhau-Kuehl, and H. Weitkamper, “Update on EP Experiences at DESY with the Electro Polishing Process at DESY 1.3 GHz”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP31, pp. XX-XX.
- J. Gutleber and R. Moser, “The MedAustron Accelerator Control System: Design, Installation and Commissioning”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOAAB04, pp. 494-497.
- V. E. Hart and E. W. Colston, “Installation and Alignment of LAMPF 201 MHz and 805 MHz Linac Tanks”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P11, pp. 358-364.
- J. Resta-L??pez and A. Faus-Golfe, “Nonlinear Post-Linac Energy Collimation System for the Compact Linear Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR017, pp. 1846-1848.
- J. Pfingstner and D. Schulte, “On-Line Dispersion Free Steering for the Main Linac of CLIC”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB007, pp. 13-15.
- S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
- L.-H. Yu, “Remembering Samuel Krinsky”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOA01, pp. XX-XX.
- S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181.
- F. Schutte, H. L. Hagedoorn, G. C. L. van Heusden, and A. J. M. van Vliet, “The Automatic Control of the Eindhoven A.V.F. Cyclotron II: Measurements”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 524-531.
- T. V. Shaftan and I. Pinayev, “Synchrotron Radiation Diagnostics for the NSLS Booster”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH062, pp. 1154-1156.
- M. Pekeler, “High Gradients in Superconducting RF Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D04, pp. 822-829.
- D. Celeste, E. Bravin, S. Burger, and F. Roncarolo, “Development and Test of a Beam Imaging System Based on Radiation Tolerant Optical Fiber Bundles”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2658-2660.
- E. Kako et al., “Advances and Performance of Input Couplers at KEK”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOBAU02, pp. 485-490.
- A. Blednykh et al., “Beam-Induced Heating of the Kicker Ceramics Chambers at NSLS-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 599-601.
- P. Chen, “Disruption Effects from the Collision of Quasi-Flat Beams”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 617-620.
- M. Boscolo et al., “Beam Dynamics Studies for the SPARXINO Linac”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP015, pp. XX-XX.
- D. Li, A. S. Ladran, D. Lozano, and R. A. Rimmer, “Mechanical and Thermal Analysis of Beryllium Windows for RF Cavities in a Muon Cooling Channel”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO009, pp. 2163-2165.
- Y. J. Suh et al., “SLED Tuning Control System for PAL-XFEL”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1452.
- G. Seidel, “Operation of the High Intensity Proton Beam Facility at PSI”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGD01, pp. 329-332.
- E. S. Rodger and H. L. Weisberg, “An Improved Copper Septum Magnet Design”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2832-2833.
- V. A. Koshelev et al., “Design of 4-vane RFQ with Magnetic Coupling Windows for Nuclotron Injector Lu-20”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 575-577.
- D. A. Shkitov, A. E. Harisova, and Y. N. Sutygina, “Simulation of Single Particle Dynamics in a Compact Planar Wiggler”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3458-3460.
- E. Schneidmiller and M. V. Yurkov, “Circular Polarization Control by Reverse Undulator Tapering”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOC01, pp. 297-299.
- S. Choroba, J. Hameister, and S. Jarylkapov, “Performance of an S-Band Klystron at an Output Power of 200MW”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4066, pp. 917-919.
- C. H. Kuo et al., “Fast Orbit Feedback System Commissioning of the Taiwan Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP009, pp. 3965-3967.
- A. Nilsson and P. Carle, “Calculations of EDDY-Current Effects in a Ramped Dipole Field”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1298-1300.
- K. Ohmi and F. Zimmermann, “Study of Beam-beam Effects in FCC-he”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2010-2012.
- V. Chohan, “Operation for LHC Cryomagnet Tests: Concerns, Challenges amp; Successful Collaboration”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUZMA02, pp. 84-88.
- P. Belochitskii, “ELENA Project Status”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THPM1HA02, pp. 192-196.
- J. M. Koch, F. Epaud, G. Gautier, E. Plouviez, and F. Uberto, “New Fast Orbit Feedback Architecture Based on Libera Brilliance Devices for the ESRF Storage Ring”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THB004, pp. 653-655.
- C.-Y. Tan, “Novel Tune Diagnostics for the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAD002, pp. 140-144.
- I. Reyzl, “Simulation of Feedback for Orbit Correction”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP043L, pp. 1887-1889.
- D. A. White and M. L. Stowell, “Discretizing Transient Curent Densities in the Maxwell Equations”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TH1IODN04, pp. 212-217.
- A. I. Borodich, “Transverse Nonlinear Focusing of Nonstationary Space Charge Dominated Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP159, pp. 1869-1871.
- S. Shiraishi and R. Tesarek, “Diffusion in Tevatron Using Flying Wire”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP007, pp. 3199-3201.
- J. Galambos, “High Power Proton Beam Targets: Technological Evolution, Current Challenges, and the Future”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1075-1079.
- C.-Y. Tan, “New Multithreaded Code for Calculating Longitudinal Collective Instabilities Using Computers with Multiprocessors”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH085, pp. 3039-3041.
- R.-D. Kohaupt and I. Reyzl, “Fast Feedback Systems for Orbit Correction in the TESLA Linear Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA41, pp. 1171-1173.
- N. Li, “Structures of Quadrupole Magnet Core”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA010, pp. 640-642.
- A. I. Borodich and I. A. Volkov, “Optimal Transport of Nonstationary High Intensity Beams”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP160, pp. 1872-1874.
- T. K. Charles and A. Castilla, “Preliminary Investigation into Accelerators for In-Situ Cultural Heritage Research”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2605-2608.
- H. Hotchi, “Operational Experience at J-PARC”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1A03, pp. 276-280.
- R. Scrivens, “Proton and Ion Sources for High Intensity Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYLH01, pp. 103-107.
- B. Liu and C.-Y. Tsai, “Particle tracking simulation and semi-analytical Vlasov calculation of CSR induced microbunching instability in a non-symmetric S-type four-dipole bunch compressor chicane”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS38, unpublished.
- R. C. Webber, “Fermilab Booster Low Level RF System Upgrades”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ10, pp. 2687-2689.
- T. Roser, “Polarized Proton Beams”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAG02, pp. 3154-3158.
- Arnaudon L., “Remote Data Acquisition for SPS 352 MHz Superconducting Cavities”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P42, pp. XX-XX.
- M. Ebert and F.-R. Ullrich, “Glycol-Substitute for High Power RF Water Loads”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT003, pp. 841-843.
- Poulsen S., “An Industrial Control System for the Supervision of the CERN Electrical Distribution Network”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TA2O02, pp. XX-XX.
- Z. Z. Zhou et al., “The SILF Accelerator Controls Plan”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUMBCMO35, pp. 449-451.
- M. R. Jana et al., “Investigation of Breakdown Induced Surface Damage on 805 MHz Pill Box Cavity Interior Surfaces”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA12, pp. 1007-1009.
- D. J. Novak, K. J. Bunnell, C. Dickerson, and D. Stanton, “Teaching an Old Accelerator New Tricks”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP082, pp. 1545-1546.
- K.-U. Kasemir, “Control System Studio Applications”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper ROPB02, pp. 692-694.
- Q. Y. Guo, “Radiation Shielding Design for Huts of HEPS Beamlines”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper WEPPP017, unpublished.
- N. V. Lazarev et al., “CONSTRUCTION OF SMALL-SCALE MULTIPURPOSE ADS AT ITEP”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP053, pp. XX-XX.
- A. Fiebig and S. Luegert, “A Radiofrequency Pulse Compressor for Square Output Pulses in the Microsecond Range”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1240-1242.
- B. Kalantari, E. Johansen, W. Koprek, P. Pollet, and G. Theidel, “CompactPCI-Serial Hardware Toolbox for SLS 2.0”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper TUAL01, unpublished.
- S. Michizono, S. Anami, T. Kobayashi, and S. Yamaguchi, “Digital Feedback System for J-Parc Linac RF Source”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP57, pp. 742-744.
- R. Nagai et al., “Performance of a Conventional Analog Phi-A Type Low-Level RF Controller”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH006, pp. 316-318.
- J. W. Kwon, G. D. Kim, and E. H. Lim, “Beam Based Calibration of Button Type Beam Position Monitor at MEBT of RAON”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper WEP11, unpublished.
- N. Balal, V. L. Bratman, A. Friedman, and Yu. Lurie, “Capabilities of Terahertz Super-Radiance from Electron Bunches Moving in Micro-Undulators”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 517-520.
- L. H. J. Bozyk, Sh. Ahmed, and P. J. Spiller, “The First-of-Series SIS100 Cryocatcher”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 930-933.
- D. Weiss, M. Mapes, J. E. Tuozzolo, and S. Verd??-Andr?®s, “EIC Hadron Beamline Vacuum Studies”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3060-3063.
- M. Parkin et al., “A Helium-Cooled Target Design at the SPS Beam Dump Facility (BDF) at CERN”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4109, this conference.
- M. L. Mallory, E. D. Hudson, and R. S. Lord, “Isochronous Cyclotron Harmonic Beam Experiments”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1694-1697.
- D. H. Kwak, S. G. Arutunian, M. Chung, G. S. Harutyunyan, E. G. Lazareva, and A. V. Margaryan, “Double-Wire Vibrating Wire Monitor (DW-VWM) for Beam Halo Monitoring in High-intensity Accelerators”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 373-376.
- K. Bane et al., “High-Intensity Single Bunch Instability Behavior In The New SLC Damping Ring Vacuum Chamber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC17, pp. 3109-3111.
- O. Karamyshev, “New Design of Cyclotron for Proton Therapy”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2973-2976.
- C. Zong, “Optimization design of photoneutron source for detecting dissolved substances in aqueous solutions”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC60, unpublished.
- R. Charak and S. Gautam, “Optimizing magnetic anisotropy and tunnel magnetoresistance in CoFe₂O₄/MgO bilayers through SHI processing”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB110, unpublished.
- R. C. Webber, “Overview and Status of Beam Instrumentation at the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2094-2097.
- C. I. Briegel, “Multi-Processor Network Implementations in Multibus II and VME”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC02, pp. 295-298.
- R. Yang, “Improving the dynamic range of a wire scanner up to 1e+7”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG47, unpublished.
- M. Adachi, R. Kato, T. Shioya, and K. Tsuchiya, “Development of compact magnetic field measurement system available for in-vacuum undulators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1449-1451.
- N. R. Lobanov and D. C. Weisser, “From Multistub Resonators to Intermodulation Measurements: SRF Activities at ANU in 2005-2007”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP59, pp. XX-XX.
- W. Ebeling et al., “The Radiofrequency-Systems of PIA”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2898-2901.
- M. Bertucci et al., “Preliminary BCP Flow Field Investigation by CFD Simulations and PIV in a Transparent Model of a SRF Elliptical Low Beta Cavity”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1204-1207.
- C. Mingioni et al., “Design of the ANTHEM RFQ mechanical supports”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB098, pp. 2677-2679.
- Y. He, Y. Li, M. A. Palmer, and D. H. Rice, “Thermal Analysis of the Al Window for a New CESR-c Luminosity Monitor”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE030, pp. 2137-2139.
- E. Acerbi, F. Alessandria, and L. Rossi, “Possible Movements of the Milan Superconducting Coils Under the Influence of Mechanical Stresses”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B14, pp. 71-74.
- K. Fong, D. A. Dohan, R. Hutcheon, and V. Pacak, “Model Study on the Reduction of RF Leakage in the TRIUMF Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2939-2942.
- C. W. Schmidt, “The Fermilab 400-MeV Linac Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1655-1660.
- F. Zimmermann and M. A. Valdivia Garc?â, “Optimized Monochromatization for Direct Higgs Production in Future Circular e+e- Colliders”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2950-2953.
- S. Lorenz et al., “Development of gas target systems for laser-plasma accelerators”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP3030, this conference.
- S. Mattiello, A. Penirschke, and H. Schlarb, “THz Generation by Optical Rectification for a Novel Shot to Shot Synchronization System Between Electron Bunches and Femtosecond Laser Pulses in a Plasma Wakefield Accelerator”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 555-559.
- F. E. Carroll, “Medical Uses of Monochromatic X-Rays”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG04, pp. 80-82.
- R. Paparella et al., “Successful Qualification of the Coaxial Blade Tuner”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP018, pp. 818-820.
- K. Zhang, C. Feng, and Y. Kang, “Continuous THz Band Coverage through Precise Electron Beam Tailoring in Free-electron Lasers”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2648, this conference.
- H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
- D. Kanjilal, “Rapid Growth of SRF in India”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUAA04, pp. 467-473.
- A. Gerasimov, “Nonlinear Evolution of Longitudinal Bunched-Beam Instabilities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3276-3279.
- M. Ehrlichman, “Accelerator-based lithography and the Induction Storage Ring Light Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEI8M01, this conference.
- Z. Chen, “Finite Element Analysis And Frequency Shift Studies for The Bridge Coupler of The Coupled Cavity Linear Accelerator of The Spallation Neutron Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE023, pp. 882-884.
- Swarn Kalsi, Richard Heese, “Calculation of Eddy-currents Induced in a Compact Synchrotron Superconductiong Magnet Structure During a Current Ramp”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2658-2661.
- S. Lueders, “Update on the CERN Computing and Network Infrastructure for Controls (CNIC)”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB38, pp. 472-474.
- P. Malmborg, “Preparations for Parasitic Production of Biomedically Useful Positron-Emitters”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3313-3316.
- F. Peauger et al., “Wakefield Monitor Development for CLIC Accelerating Structure”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP098, pp. 641-643.
- E. P. Lee, “The High Temperature Experiment for Accelerator Inertial Fusion”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3335-3338.
- Kosuge T., Abe I., Kisiro J., Kurokawa S., Mutoh M., Nigorikawa K., “Application Server and Pushing Technology on COACK-II”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P51, pp. XX-XX.
- W. Zhang et al., “Investigation of outgassing properties of CuZr and CuCrZr vacuum pipe”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB010, unpublished.
- S. Tazzari, “The European Synchrotron Radiation Facility”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3400-3403.
- T. J. Ruth, V. Leung, and P. Malmborg, “Extraction of 11C from the TRIUMF 500 MeV Isotope Production Facility Cooling Water”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3333-3335.
- W. Yuan ling, “An Electron Linear Accelerator Having an Ideal Beam Loading Characteristic”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3256-3259.
Back to search