Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Wang, C. Adolphsen, and C. D. Nantista, “Initial High Power Test Results of an X-band Dual-moded Coaxial Cavity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP139, pp. 1094-1096.
[n] S. S. Kurennoy, S. Konecni, J. F. O, and L. Rybarcyk, “Heating and Stress in the LANSCE Side-coupled Linac RF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP027, pp. 3431-3433.
[n] G. Haouat, C. Couillaud, J. Di Crescenzo, R. Joly, J. Raimbourg, and S. Seguin, “Electron Beam Diagnostics on the ELSA Free Electron Laser”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-23, pp. 103-105.
[n] X. Wu, D. Gorelov, T. Grimm, W. Hartung, F. Marti, and R. C. York, “The Misalignment and RF Error Analysis for The RIA Driver Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO441, pp. 133-135.
[n] E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
[n] M. Zach et al., “Status of the H Extraction Program at TRIUMF”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-11, pp. 368-371.
[n] T. Tanikawa et al., “A Superradiant THz Undulator Source for XFELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 48-51. doi:10.18429/JACoW-FEL2019-TUP004
[n] S. P. Moeller, “Design and first operation of the electrostatic storage ring, ELISA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ01A, pp. 73-77.
[n] K. E. Melson, J. A. Farrell, D. J. Liska, and P. Meads, “A High-Energy Beam Transport System”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-7, pp. 25-27.
[n] M. Betz and F. Caspers, “A Microwave Paraphoton and Axion Detection Experiment with 300 dB Electromagnetic Shielding at 3 GHz”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC021, pp. 3320-3322.
[n] C. Wang, J. Noonan, and J. Lewellen, “Dual-Axis Energy Recovery Linac”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 18, pp. 122-125.
[n] A. Xiao, M. Borland, L. Emery, and V. Sajaev, “Non-linear Effects of Insertion Devices: Simulation and Experiment Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM12, pp. 1073-1075.
[n] A. J. Moss, P. A. Corlett, J. F. Orrett, and J. H. P. Rogers, “ERLP/4GLS Low Level Radio Frequency System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH151, pp. 1376-1378.
[n] P. Bosland et al., “Third Harmonic Superconducting Passive Cavities in ELETTRA and SLS”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO06, pp. 239-243.
[n] H. A. Willax, “Status Report on SIN (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-03, pp. 33-40.
[n] V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
[n] C. R. Prior, “Recommendations from the International Scoping Study for a Neutrino Factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXKI02, pp. 681-685.
[n] T. Argyropoulos, E. N. Shaposhnikova, and A. V. Burov, “Loss of Landau Damping for Inductive Impedance in a Double RF System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA040, pp. 1796-1798.
[n] R. S. Shinde, P. Pareek, R. R. Yadav, and S. Kotaiah, “Development of Fast Decay Type Pulsed Kicker Magnet for Indus-1”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16059, pp. XX-XX.
[n] J. L. Steinmann et al., “Continuous Bunch-by-Bunch Reconstruction of Short Detector Pulses”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2501-2503. doi:10.18429/JACoW-IPAC2019-WEPGW017
[n] Y. Sato et al., “Wide-Band Push-Pull Amplifier for High Gradient Cavity”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP144, pp. 1007-1009.
[n] M. K. Falowski, T. R. Noga, N. Olszowska, and M. Zaj, “Synoptic GUIs in NSRC SOLARIS for Beamlines and Accelerators Visualization and Control”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 981. doi:10.18429/JACoW-ICALEPCS2019-WEDPR03
[n] T. N. Khabiboulline et al., “3.9 GHz Superconducting Accelerating 9-cell Cavity Vertical Test Results”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN111, pp. 2295-2297.
[n] P. C. Chiu, K. T. Hsu, K. H. Hu, C. H. Kuo, and C. Y. Wu, “Fast Orbit Feedback Scheme and Implementation for Taiwan Photon Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOCB202, pp. 1146-1148.
[n] X. Gu et al., “The Effects of the RHIC E-lenses Magnetic Structure Layout on the Proton Beam Trajectory”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP207, pp. 1202-1204.
[n] O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2113-2116. doi:10.18429/JACoW-IPAC2019-TUPTS083
[n] H. Matsumoto, T. Shintake, K. Kakuno, K. Ohhashi, Y. Ohkubo, and H. Taoka, “High Power Test of the First C-Band (5712 MHz) 50 MW PPM Klystron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH095, pp. 993-995.
[n] M. P. Kelly, K. W. Shepard, and M. Kedzie, “High-pressure Rinse and Chemical Polish of a Spoke Cavity”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT017, pp. XX-XX.
[n] T. J. Shea et al., “Design Considerations for the ESS Accelerator-to-Target Region”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA04, pp. 300-302.
[n] A. Ferrari, A. Ijspeert, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1300-1303.
[n] M. McAteer et al., “Simulation and Observation of Driven Beam Oscillations with Space Charge in the CERN PS Booster”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3073-3075. doi:10.18429/JACoW-IPAC2014-THPRO081
[n] M. Hosaka, M. Katoh, A. Mochihashi, K. Hayashi, J. Yamazaki, and Y. Takashima, “Present Status and Future Prospects of the UVSOR Storage Ring FEL”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20010, pp. XX-XX.
[n] H. Matsumoto et al., “RF Breakdown Studies on an S-Band Disk Loaded Structure”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1654-1657.
[n] A. Buechner et al., “Pulsed RF System for the ELBE Superconducting Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH151, pp. 411-412.
[n] G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
[n] X. Yang, J. Rose, and T. V. Shaftan, “Beam Based Calibration of Slow Orbit Bump at NSLS Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP108, pp. 2763-2765.
[n] M. H. Blewett, “Magnet Design in High- Energy Accelerators”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 317-327.
[n] H. Z. Zhang, S. Dong, Z. P. Li, and C.-F. Wu, “Design of Photonic Bandgap Fiber Accelerating Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP023, pp. 4582-4584.
[n] G. V. Sotnikov, J. L. Hirshfield, T. C. Marshall, and S. V. Shchelkunov, “A Reciprocity Principle for Wakefields in a Two-Channel Coaxial Dielectric Structure”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP004, pp. 2726-2728.
[n] T. Ogitsu, N. Ohuchi, T. Ozaki, R. Sugahara, N. Toge, and K. Tsuchiya, “Final-focus Superconducting Magnet System for the Interaction Region of KEKB”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP19G, pp. 2038-2040.
[n] A. M. Sessler, “Photon-Photon Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FPD02, pp. 30-34.
[n] E. A. Peter, A. Endler, F. B. Rizzato, and A. P. B. Serbeto, “Mixing and Space-Charge Effects In Free-Electron Lasers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1410-1412. doi:10.18429/JACoW-IPAC2015-TUPWA008
[n] A. Saini, A. Latina, A. Lunin, K. Ranjan, N. Solyak, and V. P. Yakovlev, “Study of Coupler's Effects on ILC Like Lattice”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD088, pp. 4491-4493.
[n] P. Gruber and Y. Torun, “Beam Photography: A Technique for Imaging Dark Currents”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB091, pp. 1413-1415.
[n] U. Iriso, M. Alvarez, G. Benedetti, A. A. Nosych, A. Olmos, and X. I. Rodriguez, “Upgrade of BPMs and SRMs for the BTS Transfer Line at ALBA”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 65-67. doi:10.18429/JACoW-IBIC2017-MOPCC12
[n] J.-M. Lagniel and S. Nath, “On Energy Equipartition Induced by Space Charge in Bunched Beams”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP24G, pp. 1118-1120.
[n] N. Utzel et al., “ITER Contribution to Control System Studio (CSS) Development Effort”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB08, pp. 540-543.
[n] G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
[n] A. S. Plastun and T. V. Bondarenko, “RF Quadrupole Focusing Lattices”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB010, pp. 331-333.
[n] H. Sato et al., “Switching Power Supply for the PFL Kicker Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE038, pp. 1165-1167.
[n] A. M. Lombardi, “Design and Beam Tests of an RFQ to Accelerate a Lead Ion Beam from a Laser Ion Source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP24, pp. 384-386.
[n] T. Gatsi, X. P. Baloyi, J. L. Lekganyane, and R. L. Schwartz, “ELK Stack Deployment with Ansible”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1411-1414. doi:10.18429/JACoW-ICALEPCS2023-THPDP047
[n] J. Q. Xu, J. J. Lu, G. Wang, and X. Xia, “Radiation Calculations for Advanced Proton Therapy Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA027, pp. 3201-3203.
[n] A. Ghigo et al., “Status of the CTF3 Frequency Multiplication Rings”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA075, pp. 217-219.
[n] T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 274-276. doi:10.18429/JACoW-IPAC2017-MOPAB069
[n] L. J. Jenner et al., “A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP072, pp. 715-717.
[n] M. Yoon and G. Mavrogenes, “Capture and Containment of the Positron Beam in the APS Injector Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 903-906.
[n] C. E. Reece, “Overview of CEBAF Operations and SRF-Related Activities at Jefferson Lab”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA004, pp. 15-18.
[n] N. Banerjee et al., “Essential Instrumentation for the Characterization of ERL Beams”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 150-154. doi:10.18429/JACoW-ERL2019-FRCOWBS04
[n] S. F. Mikhailov et al., “Project of Booster Synchrotron for Duke FEL Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH124, pp. 3525-3527.
[n] T. Quast, A. Firsov, K. Holldack, S. Khan, and R. Mitzner, “Upgrade of the BESSY Femtoslicing Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN016, pp. 950-952.
[n] M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
[n] G. Papotti, T. Bohl, T. P. R. Linnecar, E. N. Shaposhnikova, and J. Tuckmantel, “Study of Controlled Longitudinal Emittance Blow-up for High Intensity LHC Beams in the CERN SPS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP059, pp. 1676-1678.
[n] M. Chowdhary, G. A. Krafft, H. Shoaee, S. N. Simrock, and W. A. Watson, “A Prototype Fast Feedback System for Energy Lock at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE11, pp. 2417-2419.
[n] M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3069-3071. doi:10.18429/JACoW-IPAC2015-WEPMN062
[n] J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
[n] M. K. Bock et al., “Report on the Redesign of the Fibre Link Stabilisation Units at FLASH”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA19, pp. 370-373.
[n] I. Altmann, A. Gamp, K. Rehlich, T. Schilcher, and S. N. Simrock, “Operational Experience with the RF Control for the TESLA Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP024L, pp. 1863-1865.
[n] M. Zerlauth, C. Dehavay, B. Puccio, R. Schmidt, and E. Veyrunes, “From the LHC Reference Database to the Powering Interlock System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP514, pp. XX-XX.
[n] G. Sandberg, “Electron Beam Flattening with an Annular Scattering Foil”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 1025-1027.
[n] R. M??ller et al., “Installing a Fast Orbit Feedback at BESSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB030, pp. 2749-2751.
[n] A. Fabris et al., “Energy and Repetition Rate Upgrade of the S-Band RF System of the FERMI Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA02, pp. 984-986.
[n] M. P. Level, P. C. Marin, P. Nghiem, E. M. Sommer, and H. Zyngier, “Progress Report on Super-ACO”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 470-473.
[n] Y.-M. Shin, K. Carlson, M. D. Church, V. D. Shiltsev, D. A. Still, and J. C. Tobin, “Crystal Channeling Acceleration Research for High Energy Linear Collider at ASTA Facility”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO70, pp. 122-126.
[n] E. G. Michaelis, “Status of the CERN Synchrocyclotron Improvement Program and Plans for Physics Facilities (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 141-166.
[n] L. Grassellino et al., “Preparation and qualification of pre-production SSR2 jacketed cavities for PIP-II”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP45, unpublished.
[n] T. Kageyama, Y. Morozumi, Y. Yamazaki, and K. Yoshino, “A High-Power Moder of the ACS Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO438, pp. 150-152.
[n] D. Reschke, “Performance of Superconducting Cavities for the European XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3186-3191. doi:10.18429/JACoW-IPAC2016-THYB01
[n] J. Roensch-Schulenburg et al., “Experience with Multi-Beam and Multi-Beamline FEL-Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2615-2617. doi:10.18429/JACoW-IPAC2017-WEPAB021
[n] R. Nagaoka, “Study of Resistive-Wall Instabilities with a Multi-bunch Tracking”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI011, pp. 1538-1540.
[n] T. L. Houck et al., “Stack Insulator Induction Accelerator Gaps”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P047, pp. 3722-3724.
[n] E. R. Rotela, A. Baricikowski, J. Biggs, and S. Sharma, “Mechanical Design of a Flexible Bunch Compressor for APS Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH167, pp. 4041-4043.
[n] T. Argyropoulos, T. Bohl, H. Damerau, J. Esteban Muller, E. N. Shaposhnikova, and H. Timko, “Identification of the SPS Impedance at 1.4 GHz”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA039, pp. 1793-1795.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Wang, C. Adolphsen, and C. D. Nantista, “Initial High Power Test Results of an X-band Dual-moded Coaxial Cavity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP139, pp. 1094-1096.
- S. S. Kurennoy, S. Konecni, J. F. O, and L. Rybarcyk, “Heating and Stress in the LANSCE Side-coupled Linac RF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP027, pp. 3431-3433.
- G. Haouat, C. Couillaud, J. Di Crescenzo, R. Joly, J. Raimbourg, and S. Seguin, “Electron Beam Diagnostics on the ELSA Free Electron Laser”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-23, pp. 103-105.
- X. Wu, D. Gorelov, T. Grimm, W. Hartung, F. Marti, and R. C. York, “The Misalignment and RF Error Analysis for The RIA Driver Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO441, pp. 133-135.
- E. Takasaki, Z. Igarashi, F. Naito, K. Nanmo, and T. Takenaka, “Fields Induced by Chopped Beams in the Tank Cavity”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4058, pp. 183-185.
- M. Zach et al., “Status of the H Extraction Program at TRIUMF”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-11, pp. 368-371.
- T. Tanikawa et al., “A Superradiant THz Undulator Source for XFELs”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 48-51.
- S. P. Moeller, “Design and first operation of the electrostatic storage ring, ELISA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THZ01A, pp. 73-77.
- K. E. Melson, J. A. Farrell, D. J. Liska, and P. Meads, “A High-Energy Beam Transport System”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-7, pp. 25-27.
- M. Betz and F. Caspers, “A Microwave Paraphoton and Axion Detection Experiment with 300 dB Electromagnetic Shielding at 3 GHz”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC021, pp. 3320-3322.
- C. Wang, J. Noonan, and J. Lewellen, “Dual-Axis Energy Recovery Linac”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 18, pp. 122-125.
- A. Xiao, M. Borland, L. Emery, and V. Sajaev, “Non-linear Effects of Insertion Devices: Simulation and Experiment Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM12, pp. 1073-1075.
- A. J. Moss, P. A. Corlett, J. F. Orrett, and J. H. P. Rogers, “ERLP/4GLS Low Level Radio Frequency System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH151, pp. 1376-1378.
- P. Bosland et al., “Third Harmonic Superconducting Passive Cavities in ELETTRA and SLS”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO06, pp. 239-243.
- H. A. Willax, “Status Report on SIN (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-03, pp. 33-40.
- V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
- C. R. Prior, “Recommendations from the International Scoping Study for a Neutrino Factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUXKI02, pp. 681-685.
- T. Argyropoulos, E. N. Shaposhnikova, and A. V. Burov, “Loss of Landau Damping for Inductive Impedance in a Double RF System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA040, pp. 1796-1798.
- R. S. Shinde, P. Pareek, R. R. Yadav, and S. Kotaiah, “Development of Fast Decay Type Pulsed Kicker Magnet for Indus-1”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16059, pp. XX-XX.
- J. L. Steinmann et al., “Continuous Bunch-by-Bunch Reconstruction of Short Detector Pulses”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2501-2503.
- Y. Sato et al., “Wide-Band Push-Pull Amplifier for High Gradient Cavity”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP144, pp. 1007-1009.
- M. K. Falowski, T. R. Noga, N. Olszowska, and M. Zaj, “Synoptic GUIs in NSRC SOLARIS for Beamlines and Accelerators Visualization and Control”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 981.
- T. N. Khabiboulline et al., “3.9 GHz Superconducting Accelerating 9-cell Cavity Vertical Test Results”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN111, pp. 2295-2297.
- P. C. Chiu, K. T. Hsu, K. H. Hu, C. H. Kuo, and C. Y. Wu, “Fast Orbit Feedback Scheme and Implementation for Taiwan Photon Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOCB202, pp. 1146-1148.
- X. Gu et al., “The Effects of the RHIC E-lenses Magnetic Structure Layout on the Proton Beam Trajectory”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP207, pp. 1202-1204.
- O. Mohsen et al., “Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2113-2116.
- H. Matsumoto, T. Shintake, K. Kakuno, K. Ohhashi, Y. Ohkubo, and H. Taoka, “High Power Test of the First C-Band (5712 MHz) 50 MW PPM Klystron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH095, pp. 993-995.
- M. P. Kelly, K. W. Shepard, and M. Kedzie, “High-pressure Rinse and Chemical Polish of a Spoke Cavity”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT017, pp. XX-XX.
- T. J. Shea et al., “Design Considerations for the ESS Accelerator-to-Target Region”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA04, pp. 300-302.
- A. Ferrari, A. Ijspeert, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1300-1303.
- M. McAteer et al., “Simulation and Observation of Driven Beam Oscillations with Space Charge in the CERN PS Booster”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3073-3075.
- M. Hosaka, M. Katoh, A. Mochihashi, K. Hayashi, J. Yamazaki, and Y. Takashima, “Present Status and Future Prospects of the UVSOR Storage Ring FEL”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20010, pp. XX-XX.
- H. Matsumoto et al., “RF Breakdown Studies on an S-Band Disk Loaded Structure”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1654-1657.
- A. Buechner et al., “Pulsed RF System for the ELBE Superconducting Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH151, pp. 411-412.
- G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
- X. Yang, J. Rose, and T. V. Shaftan, “Beam Based Calibration of Slow Orbit Bump at NSLS Booster”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP108, pp. 2763-2765.
- M. H. Blewett, “Magnet Design in High- Energy Accelerators”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 317-327.
- H. Z. Zhang, S. Dong, Z. P. Li, and C.-F. Wu, “Design of Photonic Bandgap Fiber Accelerating Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP023, pp. 4582-4584.
- G. V. Sotnikov, J. L. Hirshfield, T. C. Marshall, and S. V. Shchelkunov, “A Reciprocity Principle for Wakefields in a Two-Channel Coaxial Dielectric Structure”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP004, pp. 2726-2728.
- T. Ogitsu, N. Ohuchi, T. Ozaki, R. Sugahara, N. Toge, and K. Tsuchiya, “Final-focus Superconducting Magnet System for the Interaction Region of KEKB”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP19G, pp. 2038-2040.
- A. M. Sessler, “Photon-Photon Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FPD02, pp. 30-34.
- E. A. Peter, A. Endler, F. B. Rizzato, and A. P. B. Serbeto, “Mixing and Space-Charge Effects In Free-Electron Lasers”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1410-1412.
- A. Saini, A. Latina, A. Lunin, K. Ranjan, N. Solyak, and V. P. Yakovlev, “Study of Coupler's Effects on ILC Like Lattice”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD088, pp. 4491-4493.
- P. Gruber and Y. Torun, “Beam Photography: A Technique for Imaging Dark Currents”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB091, pp. 1413-1415.
- U. Iriso, M. Alvarez, G. Benedetti, A. A. Nosych, A. Olmos, and X. I. Rodriguez, “Upgrade of BPMs and SRMs for the BTS Transfer Line at ALBA”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 65-67.
- J.-M. Lagniel and S. Nath, “On Energy Equipartition Induced by Space Charge in Bunched Beams”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP24G, pp. 1118-1120.
- N. Utzel et al., “ITER Contribution to Control System Studio (CSS) Development Effort”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB08, pp. 540-543.
- G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
- A. S. Plastun and T. V. Bondarenko, “RF Quadrupole Focusing Lattices”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB010, pp. 331-333.
- H. Sato et al., “Switching Power Supply for the PFL Kicker Magnet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE038, pp. 1165-1167.
- A. M. Lombardi, “Design and Beam Tests of an RFQ to Accelerate a Lead Ion Beam from a Laser Ion Source”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP24, pp. 384-386.
- T. Gatsi, X. P. Baloyi, J. L. Lekganyane, and R. L. Schwartz, “ELK Stack Deployment with Ansible”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP047, pp. 1411-1414.
- J. Q. Xu, J. J. Lu, G. Wang, and X. Xia, “Radiation Calculations for Advanced Proton Therapy Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA027, pp. 3201-3203.
- A. Ghigo et al., “Status of the CTF3 Frequency Multiplication Rings”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA075, pp. 217-219.
- T. Toyama et al., “Measurement of Transverse Multipole Moments of the Proton Beam in the J-PARC MR”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 274-276.
- L. J. Jenner et al., “A Study of Mechanical and Magnetic Issues for a Prototype Positron Source Target”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP072, pp. 715-717.
- M. Yoon and G. Mavrogenes, “Capture and Containment of the Positron Beam in the APS Injector Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 903-906.
- C. E. Reece, “Overview of CEBAF Operations and SRF-Related Activities at Jefferson Lab”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOA004, pp. 15-18.
- N. Banerjee et al., “Essential Instrumentation for the Characterization of ERL Beams”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 150-154.
- S. F. Mikhailov et al., “Project of Booster Synchrotron for Duke FEL Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH124, pp. 3525-3527.
- T. Quast, A. Firsov, K. Holldack, S. Khan, and R. Mitzner, “Upgrade of the BESSY Femtoslicing Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN016, pp. 950-952.
- M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
- G. Papotti, T. Bohl, T. P. R. Linnecar, E. N. Shaposhnikova, and J. Tuckmantel, “Study of Controlled Longitudinal Emittance Blow-up for High Intensity LHC Beams in the CERN SPS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP059, pp. 1676-1678.
- M. Chowdhary, G. A. Krafft, H. Shoaee, S. N. Simrock, and W. A. Watson, “A Prototype Fast Feedback System for Energy Lock at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE11, pp. 2417-2419.
- M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3069-3071.
- J. Billan et al., “Performance of Prototypes and Start Up of Series Fabrication of the LHC Arc Quadrupoles”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH086, pp. 3430-3432.
- M. K. Bock et al., “Report on the Redesign of the Fibre Link Stabilisation Units at FLASH”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA19, pp. 370-373.
- I. Altmann, A. Gamp, K. Rehlich, T. Schilcher, and S. N. Simrock, “Operational Experience with the RF Control for the TESLA Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP024L, pp. 1863-1865.
- M. Zerlauth, C. Dehavay, B. Puccio, R. Schmidt, and E. Veyrunes, “From the LHC Reference Database to the Powering Interlock System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP514, pp. XX-XX.
- G. Sandberg, “Electron Beam Flattening with an Annular Scattering Foil”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 1025-1027.
- R. M??ller et al., “Installing a Fast Orbit Feedback at BESSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB030, pp. 2749-2751.
- A. Fabris et al., “Energy and Repetition Rate Upgrade of the S-Band RF System of the FERMI Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA02, pp. 984-986.
- M. P. Level, P. C. Marin, P. Nghiem, E. M. Sommer, and H. Zyngier, “Progress Report on Super-ACO”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 470-473.
- Y.-M. Shin, K. Carlson, M. D. Church, V. D. Shiltsev, D. A. Still, and J. C. Tobin, “Crystal Channeling Acceleration Research for High Energy Linear Collider at ASTA Facility”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO70, pp. 122-126.
- E. G. Michaelis, “Status of the CERN Synchrocyclotron Improvement Program and Plans for Physics Facilities (Invited paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 141-166.
- L. Grassellino et al., “Preparation and qualification of pre-production SSR2 jacketed cavities for PIP-II”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP45, unpublished.
- T. Kageyama, Y. Morozumi, Y. Yamazaki, and K. Yoshino, “A High-Power Moder of the ACS Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO438, pp. 150-152.
- D. Reschke, “Performance of Superconducting Cavities for the European XFEL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3186-3191.
- J. Roensch-Schulenburg et al., “Experience with Multi-Beam and Multi-Beamline FEL-Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2615-2617.
- R. Nagaoka, “Study of Resistive-Wall Instabilities with a Multi-bunch Tracking”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI011, pp. 1538-1540.
- T. L. Houck et al., “Stack Insulator Induction Accelerator Gaps”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P047, pp. 3722-3724.
- E. R. Rotela, A. Baricikowski, J. Biggs, and S. Sharma, “Mechanical Design of a Flexible Bunch Compressor for APS Linac”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH167, pp. 4041-4043.
- T. Argyropoulos, T. Bohl, H. Damerau, J. Esteban Muller, E. N. Shaposhnikova, and H. Timko, “Identification of the SPS Impedance at 1.4 GHz”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA039, pp. 1793-1795.
Back to search