Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Thuillier et al., “Recent Results of PHOENIX V2 and New Prospects with PHOENIX V3”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEZO03, pp. 117-120.
[n] Z. Parsa and L. Young, “On Design and Analysis of a High Brightness Electron Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 679-682.
[n] S. Bernal et al., “Commissioning of the University of Maryland Electron Ring (UMER)”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAD005, pp. 469-471.
[n] A. N. Govorov, “LU-20 Linac as an Injector for the Nucleotron”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP12, pp. 349-351.
[n] K. Ammigan et al., “Post Irradiation Examination Results of the NT-02 Graphite Fins Numi Target”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 99-101. doi:10.18429/JACoW-NAPAC2016-MOPOB13
[n] A. Friedman, O. Bangerter, D. A. Callahan, D. P. Grote, I. Haber, and A. B. Langdon, “A 3 D Particle Simulation Code for Heavy Ion Fusion Accelerator Studies”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1699-1702.
[n] M. Nedos, N. Pupeter, V. Wied, B. Keune, C. Quitmann, and G. Blokesch, “High-efficiency industrial 130 kW cw solid-state RF amplifier for 1.3 GHz”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3590-3592. doi:10.18429/JACoW-IPAC2023-WEPM010
[n] F. Fienga et al., “iPipe: An Innovative Fiber Optic Monitoring System for Beam Induced Heating on Accelerator Pipes”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2166-2168. doi:10.18429/JACoW-IPAC2018-WEPAL011
[n] E. A. Wadlinger, “General Least-Squares Fitting Procedures to Minimize the Volume of a Hyperellipsoid”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S4-7, pp. 242-244.
[n] M. Masuzawa and K. Egawa, “Preliminary Results of Magnet Measurements for the KEK B-Factory Quadrupole Magnets”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D070, pp. 570-572.
[n] W. A. Barth, V. Gettmann, S. Mickat, and P. Gerhard, “Superconducting CW Heavy Ion Linac at GSI”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB074, pp. 645-647.
[n] J. Chen et al., “Commissioning Results and Progress of a Helium Injector for Coupled RFQ and SFRFQ Project at Peking University”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI033, pp. 357-359.
[n] S. M. Hartman and K. S. White, “Control System Plans for SNS Upgrade Projects”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 12. doi:10.18429/JACoW-ICALEPCS2019-MOAPP03
[n] M.-S. Chiu, H.-P. Chang, P. J. Chou, and F. H. Tseng, “Development of MATLAB-based Application Programs for the Optics Matching, Beam Steering, and Injection Conditioning in TPS Commissioning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO059, pp. 1025-1027.
[n] K. Beckert et al., “Lowest Temperatures in Cooled Heavy Ion Beams at the ESR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP42G, pp. 1064-1066.
[n] T. E. Plawski et al., “Resonance Control System for the CEBAF Separator Upgrade”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 792-794. doi:10.18429/JACoW-LINAC2016-THPRC012
[n] S. I. Bajlekov, R. Bartolini, and S. M. Hooker, “Simulating Sub-wavelength Temporal Effects in a Seeded FEL Driven by Laser-accelerated Electrons”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC42, pp. 119-122.
[n] A. H. Barnard, “Design of a Spiral Inflector at iThemba LABS for Injecting the Beam into a Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRBI02, pp. 373-377. doi:10.18429/JACoW-CYCLOTRONS2022-FRBI02
[n] Yu. A. Budanov, O. K. Belyaev, A. Maltsev, and I. A. Zvonarev, “Acceleration of Heavy Ions in Space Periodic Quadrupole RF Focusing Structure”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB009, pp. 190-192.
[n] A. Caruso, “DDS-BASED CONTROL LOOPS FOR THE RF SYSTEM AT INFN - LNS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P23, pp. XX-XX.
[n] P. Cara et al., “The Linear IFMIF Prototype Accelerator (LIPAC) Design Development under the European-Japanese Collaboration”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 985-988. doi:10.18429/JACoW-IPAC2016-MOPOY057
[n] O. Caretta, T. W. Davies, C. J. Densham, P. Loveridge, and R. M. Woods, “Morphology of a Powder Jet as a Target for the Neutrino Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP032, pp. 2859-2859.
[n] C. H. Huang, Y.-T. Chang, Y.-S. Cheng, K. T. Hsu, and C. H. Kuo, “Network Architecture at Taiwan Photon Source of NSRRC”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO034, pp. 117-119.
[n] W. Zhang and Y. Zhu, “A Novel Attempt to Develop a Linear Polarization Adjustable Undulator Based on Magnetic Force Compensation Technology”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 140-142. doi:10.18429/JACoW-MEDSI2018-TUPH42
[n] V. Palmieri, K. Atroshchenko, A. M. Camacho Romero, A. A. Rossi, and S. Stark, “Athmospheric Surface Treatments to SC cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUIOA01, pp. 275-279.
[n] S. Khan, N. Marquardt, W. Sandner, and I. Will, “Generation of Femtosecond X-Ray Pulses and Other Laser-Electron Beam Experiments at DELTA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP21G, pp. 1306-1308.
[n] S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 121-124.
[n] P. Sunwong et al., “Design and Fabrication of a Combined Function Magnet Prototype for Siam Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3466-3468. doi:10.18429/JACoW-IPAC2018-THPAK100
[n] N. I. Balalykin, C. Boehme, O. I. Brovko, V. F. Bykovsky, J. Dietrich, and V. Kamerdzhiev, “DEVELOPMENT OF BEAM POSITION AND PROFILE MONITOR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP42, pp. XX-XX.
[n] B. Kulke, R. Frye, and F. Penko, “Effects of Irradiation on Hall Probe Sensitivity”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1993-1996.
[n] M. Gasior Geneva, “An Inductive Pick-Up for Beam Position and Current Measurements”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper CT01, pp. XX-XX.
[n] N. Garmendia et al., “Low Power RF Characterization of ESS Bilbao RFQ Cold Model”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3308-3310. doi:10.18429/JACoW-IPAC2014-THPME038
[n] A. Navarro Fernandez, F. Roncarolo, and M. Sapinski, “Development of a Thermal Response Model for Wire Grid Profile Monitors and Benchmarking to CERN LINAC4 Experiments”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 82-85. doi:10.18429/JACoW-IBIC2020-TUPP35
[n] C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
[n] S. H. Liu, W. L. Chen, W. P. Dou, Y. He, Y. S. Qin, and Z. J. Wang, “High Availability Oriented Physics design for CiADS Proton Linac”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper TUC2I1, unpublished.
[n] A. Drees et al., “Abort Gap Cleaning in RHIC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI073, pp. 1873-1875.
[n] Y. Ivanyushenkov, S. Sasaki, and E. Trakhtenberg, “A Concept for a Quasi-Periodic Planar Superconducting Undulator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP079, pp. 316-317.
[n] S. M. Polozov and T. V. Bondarenko, “S-band ps Pulse Photoinjector for THz Radiation Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC036, pp. 1078-1080.
[n] N. Marsic, H. De Gersem, W. F. O. M?â, F. Kurian, M. Schwickert, and T. Sieber, “Analytical and Numerical Performance Analysis of a Cryogenic Current Comparator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 160-162. doi:10.18429/JACoW-IPAC2017-MOPAB037
[n] C. Egelhaaf, D. Erdmann, H. Homeyer, and W-D. Zeitz, “The VICKSI Beam Line Instrumentation and Control System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1745-1748.
[n] S. D. Webb and V. Litvinenko, “Evolution of Electron Beam Phase Space Distribution in a High-gain FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC83, pp. 208-210.
[n] G. Stover, R. Dwinell, J. Halliwell, and M. Nyman, “Operational Results for the Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1890-1893.
[n] R. T. Dowd, M. J. Boland, G. LeBlanc, D. J. Peake, and Y. E. Tan, “Impedance Effects in the Australian Synchrotron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD026, pp. 1979-1981.
[n] S. Seletskiy, Y. Hidaka, B. Podobedov, and X. Yang, “Upgrade of Beam Injection Diagnostics at BNL NSLS”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC16, pp. 1175-1177.
[n] H. Sullivan et al., “Mechanical design and testing of a magnetically coupled motion system for LHC wire scanners”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 463-467. doi:10.18429/JACoW-IBIC2025-TUPMO06
[n] F. Caspers, M. Morvillo, and F. Ruggiero, “Surface Resistance Measurements for the LHC Beam Screen”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B008, pp. 75-77.
[n] Q. King, K. T. Lebioda, M. Magrans de Abril, M. Martino, R. Murillo-Garcia, and A. Nicoletti, “CCLIBS: The CERN Power Converter Control Libraries”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 950-953. doi:10.18429/JACoW-ICALEPCS2015-WEPGF106
[n] J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, X. Liu, and S. De Santis, “A Comparison of Electron Cloud Density Measurements at CesrTA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA071, pp. 843-845.
[n] K. Hatanaka et al., “Developments of HTS Magnets at RCNP”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPSH011, pp. 242-244.
[n] K. Kim et al., “Design of a 1.2 GeV Synchrotron Light Source for X-Ray Lithography at Samsung Heavy Industries”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR03, pp. 269-271.
[n] A. Will, A. Bernhard, A.-S. Mueller, C. Widmann, and M. Kaluza, “Detailed Analysis of a Linear Beam Transport Line from a Laser Wakefield Accelerator to a Transverse-Gradient Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1711-1714. doi:10.18429/JACoW-IPAC2017-TUPIK014
[n] T. J. Roberts and D. M. Kaplan, “G4Beamline Simulation Program for Matter-dominated Beamlines”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN103, pp. 3468-3470. doi:10.1109/PAC.2007.4440461
[n] J. Kim et al., “Sub-100-attosecond Timing Jitter Ultrafast Fiber Lasers for FEL Optical Master Oscillators”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper FROA3, pp. 648-651.
[n] S. Seletskiy and N. Solyak, “Final Design of ILC RTML Extraction Line for Single Stage Bunch Compressor”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP105, pp. 2321-2323.
[n] F.-J. Decker et al., “Luminosity Variations along Bunch Trains in PEP-II”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS044, pp. 640-642.
[n] K. Harada et al., “The HMBA Lattice Optimization for the New 3 GeV Light Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3251-3253. doi:10.18429/JACoW-IPAC2016-THPMB012
[n] P. Gomes et al., “Consolidations on the Vacuum Controls of the CERN Accelerators, During the First Long Shutdown of the LHC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 322-325. doi:10.18429/JACoW-ICALEPCS2015-MOPGF104
[n] F. M?®ot, P. N. Joshi, J. P. Lidestri, and N. Tsoupas, “Progress on the Optics Modeling of BMIÔÇÖs Ion Rapid-Cycling Medical Synchrotron at BNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3561-3563. doi:10.18429/JACoW-IPAC2019-THPMP050
[n] J. V. Lebacqz, “High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 86-96.
[n] G. Brianti, “Large Hadron Collider in the LEP Tunnel”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 2008-2014.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Thuillier et al., “Recent Results of PHOENIX V2 and New Prospects with PHOENIX V3”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEZO03, pp. 117-120.
- Z. Parsa and L. Young, “On Design and Analysis of a High Brightness Electron Source”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 679-682.
- S. Bernal et al., “Commissioning of the University of Maryland Electron Ring (UMER)”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAD005, pp. 469-471.
- A. N. Govorov, “LU-20 Linac as an Injector for the Nucleotron”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP12, pp. 349-351.
- K. Ammigan et al., “Post Irradiation Examination Results of the NT-02 Graphite Fins Numi Target”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 99-101.
- A. Friedman, O. Bangerter, D. A. Callahan, D. P. Grote, I. Haber, and A. B. Langdon, “A 3 D Particle Simulation Code for Heavy Ion Fusion Accelerator Studies”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1699-1702.
- M. Nedos, N. Pupeter, V. Wied, B. Keune, C. Quitmann, and G. Blokesch, “High-efficiency industrial 130 kW cw solid-state RF amplifier for 1.3 GHz”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM010, pp. 3590-3592.
- F. Fienga et al., “iPipe: An Innovative Fiber Optic Monitoring System for Beam Induced Heating on Accelerator Pipes”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2166-2168.
- E. A. Wadlinger, “General Least-Squares Fitting Procedures to Minimize the Volume of a Hyperellipsoid”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S4-7, pp. 242-244.
- M. Masuzawa and K. Egawa, “Preliminary Results of Magnet Measurements for the KEK B-Factory Quadrupole Magnets”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D070, pp. 570-572.
- W. A. Barth, V. Gettmann, S. Mickat, and P. Gerhard, “Superconducting CW Heavy Ion Linac at GSI”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB074, pp. 645-647.
- J. Chen et al., “Commissioning Results and Progress of a Helium Injector for Coupled RFQ and SFRFQ Project at Peking University”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI033, pp. 357-359.
- S. M. Hartman and K. S. White, “Control System Plans for SNS Upgrade Projects”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 12.
- M.-S. Chiu, H.-P. Chang, P. J. Chou, and F. H. Tseng, “Development of MATLAB-based Application Programs for the Optics Matching, Beam Steering, and Injection Conditioning in TPS Commissioning”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO059, pp. 1025-1027.
- K. Beckert et al., “Lowest Temperatures in Cooled Heavy Ion Beams at the ESR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP42G, pp. 1064-1066.
- T. E. Plawski et al., “Resonance Control System for the CEBAF Separator Upgrade”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 792-794.
- S. I. Bajlekov, R. Bartolini, and S. M. Hooker, “Simulating Sub-wavelength Temporal Effects in a Seeded FEL Driven by Laser-accelerated Electrons”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC42, pp. 119-122.
- A. H. Barnard, “Design of a Spiral Inflector at iThemba LABS for Injecting the Beam into a Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper FRBI02, pp. 373-377.
- Yu. A. Budanov, O. K. Belyaev, A. Maltsev, and I. A. Zvonarev, “Acceleration of Heavy Ions in Space Periodic Quadrupole RF Focusing Structure”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB009, pp. 190-192.
- A. Caruso, “DDS-BASED CONTROL LOOPS FOR THE RF SYSTEM AT INFN - LNS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P23, pp. XX-XX.
- P. Cara et al., “The Linear IFMIF Prototype Accelerator (LIPAC) Design Development under the European-Japanese Collaboration”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 985-988.
- O. Caretta, T. W. Davies, C. J. Densham, P. Loveridge, and R. M. Woods, “Morphology of a Powder Jet as a Target for the Neutrino Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP032, pp. 2859-2859.
- C. H. Huang, Y.-T. Chang, Y.-S. Cheng, K. T. Hsu, and C. H. Kuo, “Network Architecture at Taiwan Photon Source of NSRRC”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO034, pp. 117-119.
- W. Zhang and Y. Zhu, “A Novel Attempt to Develop a Linear Polarization Adjustable Undulator Based on Magnetic Force Compensation Technology”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 140-142.
- V. Palmieri, K. Atroshchenko, A. M. Camacho Romero, A. A. Rossi, and S. Stark, “Athmospheric Surface Treatments to SC cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUIOA01, pp. 275-279.
- S. Khan, N. Marquardt, W. Sandner, and I. Will, “Generation of Femtosecond X-Ray Pulses and Other Laser-Electron Beam Experiments at DELTA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP21G, pp. 1306-1308.
- S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 121-124.
- P. Sunwong et al., “Design and Fabrication of a Combined Function Magnet Prototype for Siam Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3466-3468.
- N. I. Balalykin, C. Boehme, O. I. Brovko, V. F. Bykovsky, J. Dietrich, and V. Kamerdzhiev, “DEVELOPMENT OF BEAM POSITION AND PROFILE MONITOR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP42, pp. XX-XX.
- B. Kulke, R. Frye, and F. Penko, “Effects of Irradiation on Hall Probe Sensitivity”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1993-1996.
- M. Gasior Geneva, “An Inductive Pick-Up for Beam Position and Current Measurements”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper CT01, pp. XX-XX.
- N. Garmendia et al., “Low Power RF Characterization of ESS Bilbao RFQ Cold Model”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3308-3310.
- A. Navarro Fernandez, F. Roncarolo, and M. Sapinski, “Development of a Thermal Response Model for Wire Grid Profile Monitors and Benchmarking to CERN LINAC4 Experiments”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 82-85.
- C. S. Chen and Z.-D. Tsai, “The FPGA-based Power Monitoring System for TPS Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA048, pp. 3252-3254.
- S. H. Liu, W. L. Chen, W. P. Dou, Y. He, Y. S. Qin, and Z. J. Wang, “High Availability Oriented Physics design for CiADS Proton Linac”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC2I1, unpublished.
- A. Drees et al., “Abort Gap Cleaning in RHIC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI073, pp. 1873-1875.
- Y. Ivanyushenkov, S. Sasaki, and E. Trakhtenberg, “A Concept for a Quasi-Periodic Planar Superconducting Undulator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP079, pp. 316-317.
- S. M. Polozov and T. V. Bondarenko, “S-band ps Pulse Photoinjector for THz Radiation Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC036, pp. 1078-1080.
- N. Marsic, H. De Gersem, W. F. O. M?â, F. Kurian, M. Schwickert, and T. Sieber, “Analytical and Numerical Performance Analysis of a Cryogenic Current Comparator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 160-162.
- C. Egelhaaf, D. Erdmann, H. Homeyer, and W-D. Zeitz, “The VICKSI Beam Line Instrumentation and Control System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1745-1748.
- S. D. Webb and V. Litvinenko, “Evolution of Electron Beam Phase Space Distribution in a High-gain FEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC83, pp. 208-210.
- G. Stover, R. Dwinell, J. Halliwell, and M. Nyman, “Operational Results for the Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1890-1893.
- R. T. Dowd, M. J. Boland, G. LeBlanc, D. J. Peake, and Y. E. Tan, “Impedance Effects in the Australian Synchrotron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD026, pp. 1979-1981.
- S. Seletskiy, Y. Hidaka, B. Podobedov, and X. Yang, “Upgrade of Beam Injection Diagnostics at BNL NSLS”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC16, pp. 1175-1177.
- H. Sullivan et al., “Mechanical design and testing of a magnetically coupled motion system for LHC wire scanners”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 463-467.
- F. Caspers, M. Morvillo, and F. Ruggiero, “Surface Resistance Measurements for the LHC Beam Screen”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2B008, pp. 75-77.
- Q. King, K. T. Lebioda, M. Magrans de Abril, M. Martino, R. Murillo-Garcia, and A. Nicoletti, “CCLIBS: The CERN Power Converter Control Libraries”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 950-953.
- J. P. Sikora, J. A. Crittenden, D. O. Duggins, Y. Li, X. Liu, and S. De Santis, “A Comparison of Electron Cloud Density Measurements at CesrTA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA071, pp. 843-845.
- K. Hatanaka et al., “Developments of HTS Magnets at RCNP”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPSH011, pp. 242-244.
- K. Kim et al., “Design of a 1.2 GeV Synchrotron Light Source for X-Ray Lithography at Samsung Heavy Industries”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR03, pp. 269-271.
- A. Will, A. Bernhard, A.-S. Mueller, C. Widmann, and M. Kaluza, “Detailed Analysis of a Linear Beam Transport Line from a Laser Wakefield Accelerator to a Transverse-Gradient Undulator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1711-1714.
- T. J. Roberts and D. M. Kaplan, “G4Beamline Simulation Program for Matter-dominated Beamlines”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN103, pp. 3468-3470.
- J. Kim et al., “Sub-100-attosecond Timing Jitter Ultrafast Fiber Lasers for FEL Optical Master Oscillators”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper FROA3, pp. 648-651.
- S. Seletskiy and N. Solyak, “Final Design of ILC RTML Extraction Line for Single Stage Bunch Compressor”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP105, pp. 2321-2323.
- F.-J. Decker et al., “Luminosity Variations along Bunch Trains in PEP-II”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS044, pp. 640-642.
- K. Harada et al., “The HMBA Lattice Optimization for the New 3 GeV Light Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3251-3253.
- P. Gomes et al., “Consolidations on the Vacuum Controls of the CERN Accelerators, During the First Long Shutdown of the LHC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 322-325.
- F. M?®ot, P. N. Joshi, J. P. Lidestri, and N. Tsoupas, “Progress on the Optics Modeling of BMIÔÇÖs Ion Rapid-Cycling Medical Synchrotron at BNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3561-3563.
- J. V. Lebacqz, “High Power Klystrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 86-96.
- G. Brianti, “Large Hadron Collider in the LEP Tunnel”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 2008-2014.
Back to search