JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Goldblatt et al., “LINAC4 Laser Profile and Emittance Meter Commissioning”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 357-361. doi:10.18429/JACoW-IBIC2022-TU3C3
[n]	M. Heuer, S. Pfeiffer, H. Schlarb, and G. Lichtenberg, “Comparison of Feedback Controller for Link Stabilizing Units of the Laser Based Synchronisation System used at the European XFEL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCZB3, pp. 34-38. 
[n]	A. R. Bainbridge, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Demonstration of ÔÇÿZEPTOÔÇÖ Permanent Magnet Technology on Diamond Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2370-2373. doi:10.18429/JACoW-IPAC2021-TUPAB365
[n]	W. Bruns, H. Henke, R. Lorenz, and B. Littmann, “Window Design with MAFIA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1133-1136. 
[n]	T. Inagaki et al., “Construction of a Compact Electron Injector Using a Gridded RF Thermionic Gun and a C-Band Accelerator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2687-2689. doi:10.18429/JACoW-IPAC2021-WEPAB039
[n]	P. Marchand et al., “Operational Experience with the SOLEIL Superconducting RF System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP064, pp. 269-273. 
[n]	R. Soliday, “A TCL/TK Widget for Display of MEDM Screens”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT057, pp. 3393-3395. 
[n]	A. I. Drozhdin and N. V. Mokhov, “Optimization of the LHC Beam Cleaning System with Respect to Beam Loss in the High Luminosity Insertions”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P013, pp. 116-118. 
[n]	E. A. Frame et al., “Simulations of the Upgraded Drive-Beam Photoinjector at the Argonne Wakefield Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2015-2018. doi:10.18429/JACoW-IPAC2022-WEPOPT065
[n]	T. Schmidt et al., “Magnetic Design of an Apple III Undulator for SwissFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP043, pp. 116-120. 
[n]	H.-G. Lee et al., “Design and Fabrication of Arups U6 Undulator at PLS”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA117, pp. 806-808. 
[n]	S. Simon, C. Benjamin, R. Valizadeh, and J. Bradley, “Tailoring the production of Nb superconducting films for SRF cavities: mass/energy spectroscopy and film characterisation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2806-2809. doi:10.18429/JACoW-IPAC2024-WEPS49
[n]	M. Otani, K. Futatsukawa, K. Hirano, A. Miura, Y. Liu, and T. Maruta, “Longitudinal Bunch Size Measurements with an RF Deflector at J-PARC LINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 974-976. doi:10.18429/JACoW-IPAC2018-TUPAK008
[n]	P. A. Shcherbakov, E. Fischer, and R. V. Kurnyshov, “3D Field Computation for the Main Prototype Magnets of the SIS100 Accelerator of the FAIR Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS093, pp. 2592-2594. 
[n]	C. Yao, J. Carvelli, K. C. Harkay, D. Hui, L. H. Morrison, and J. S. Wang, “Longitudinal Impedance Modeling of APS Particle Accumulator Ring with CST”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 140-143. doi:10.18429/JACoW-NAPAC2019-MOPLM17
[n]	T. F. Günzel, “Coherent and Incoherent Tune Shifts Deduced from Impedance Modelling in the ESRF-Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT083, pp. 2047-2049. 
[n]	J.-M. Lagniel, M. E. Eshraqi, and N. Milas, “On Liouvillian High Power Beam Accumulation”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 511-514. doi:10.18429/JACoW-HB2023-THBP22
[n]	G. Stancari, A. Semenov, and A. Valishev, “Bunch-by-Bunch Detection of Coherent Transverse Modes from Digitized Single-BPM Signals in the Tevatron”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM077, pp. 363-366. 
[n]	G. Taylor et al., “Measurements of Dark Current and Breakdown Processes using Faraday Cups and Fast Digitisers at the XBand Laboratory for Accelerators and Beams (XLAB)”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 264-268. doi:10.18429/JACoW-IBIC2025-MOPMO35
[n]	C. Bruni et al., “TWAC : EIC Pathfinder Open European project on Novel dielectric acceleration”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1468-1471. doi:10.18429/JACoW-IPAC2023-TUPA061
[n]	R. Valizadeh et al., “First Full Cryogenic Test of the SRF Thin Film Test Cavity”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 644-646. doi:10.18429/JACoW-SRF2017-TUPB104
[n]	M. A. Hevinga, S. Brandenburg, T. W. Nijboer, and J. Vorenholt, “Beamloss Monitoring and Control for High Intensity Beams at the AGOR-Facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP087, pp. 227-229. 
[n]	R. O. Nelson, R. Merl, and C. R. Rose, “Principles for Timing at Spallation Neutron Sources Based on Developments at LANSCE”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH013, pp. 797-799. 
[n]	T.-Y. Lee, “Practical Definitions of Beam Lifetimes in an Electron Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT010, pp. 1216-1218. 
[n]	J. W. G. Thomason et al., “Injection Upgrades for the ISIS Synchrotron”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD016, pp. 705-707. 
[n]	M. L. Langlois, J. P. Buge, and G. Peillex-Delphe, “Resonant High Power Combiners”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT076, pp. 3970-3972. 
[n]	W. Bruns, “Beam Coupling Impedances of Axial Symmetric Structures”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3714-3717. 
[n]	A. Jankowiak et al., “The First Two Years of Operation of the 1.5 GeV CW Electron Accelerator MAMI C”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP111, pp. 2772-2774. 
[n]	D. Rabusov and A. Oeftiger, “Space-charge limit in hadron synchrotrons induced by a gradient error”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2705-2708. doi:10.18429/JACoW-IPAC2023-WEPA025
[n]	C. Ekdahl et al., “First Beam at DARHT-II”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC008, pp. 558-562. 
[n]	M. Quattromini, L. Giannessi, C. Ronsivalle, and C. R. Frascati, “Emittance Diluition due to 3D Perturbations in RF Photoinjectors.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT054, pp. 2607-2609. 
[n]	M. K?Ârfer Deutsches Elektronen-Synchrotron, H. Henschel, J. Kuhnhenn Fraunhofer-INT, and F. Wulf Hahn-Meitner Institut, “Optical Fibre Dosimeter for SASE FEL Undulators”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT31, pp. XX-XX. 
[n]	C. Montag et al., “Overview of the eRHIC Ring-Ring Design”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3035-3037. doi:10.18429/JACoW-IPAC2017-WEPIK049
[n]	N. A. Stilin et al., “Design of a 1.3 GHz High-Power RF Coupler for Conduction-Cooled Systems”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 342-346. doi:10.18429/JACoW-SRF2023-MOPMB094
[n]	Sun An, “QUANTUM BEAM PHYSICAL INVESTIGATION ON BEAM TRANSVERSE DENSITY DISTRIBUTION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP062, pp. XX-XX. 
[n]	T. Honda, Y. Kobayashi, C. Mitsuda, S. Nagahashi, R. Takai, and H. Takaki, “Operational Status of Photon Factory Light Sources”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 350-353. doi:10.18429/JACoW-IPAC2021-MOPAB093
[n]	Y. Cheng and K. Liu, “Low Cost Concepts to Reduce the Voltage Ripple of the DC Power Supply”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1262-1265. 
[n]	F. Furuta, P. V. Avrakhov, T. N. Khabiboulline, R. A. Kostin, K. E. McGee, and V. P. Yakovlev, “Development of 3-Cell Traveling Wave SRF Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 517-520. doi:10.18429/JACoW-SRF2023-TUPTB043
[n]	H. Hähnel et al., “Current status of beam commissioning at the Frankfurt Neutron Source”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 371-374. doi:10.18429/JACoW-LINAC2024-TUPB021
[n]	Hill J., “Next Generation EPICS Communication Protocols”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P57, pp. XX-XX. 
[n]	Y. Song, K. Fan, C.-Y. Tsai, J. Yang, and Y. T. Yang, “Improvement of 6D Brightness by a 1.4-cell Photocathode RF Gun for MeV Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2033-2036. doi:10.18429/JACoW-IPAC2019-TUPTS047
[n]	S. Rubio-Manrique, G. Cun?¡, F. F. B. Fern?índez, R. Monge, and G. Scalamera, “Evolution and Convergence of Alarm Systems in Tango”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 92-95. doi:10.18429/JACoW-PCaPAC2018-WEP25
[n]	Y. Alexahin, A. I. Drozhdin, N. Yu. Kazarinov, and X. Yang, “Effects of Space Charge and Magnet Nonlinearities on Beam Dynamics in the Fermilab Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN105, pp. 3474-3476. 
[n]	C. Swain, Ö. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “Improvements on the Modified Nomarski Interferometer for Measurements of Supersonic Gas Jet Density Profiles”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 235-238. doi:10.18429/JACoW-LINAC2022-MOPORI06
[n]	D. Yu, A. Baxter, P. Chen, M. Lundquist, and Y. Luo, “Thermal Hydraulic Design of PWT Accelerating Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE038, pp. 2524-2526. 
[n]	J. F. Tooker et al., “Overview of the APT Accelerator Design”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD06, pp. 557-559. 
[n]	T. J. Campese et al., “Strongly Tapered Helical Undulator System for TESSA-266”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 63-66. doi:10.18429/JACoW-NAPAC2019-MOZBA3
[n]	S. Mikhailov et al., “Status of the Booster Injector for the Duke FEL Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE061, pp. 3544-3546. 
[n]	D. Kaltchev, R. V. Servranckx, M. K. Craddock, and W. Joho, “Lattice Studies for a High-Brightness Light Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAB14, pp. 2823-2825. 
[n]	D. Boehne, “The Role of Industry and Accelerator Laboratories in Future Particle Beam Facilities for Cancer Therapy”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEZ07T, pp. 241-243. 
[n]	J. S. Chen, G. J. Jan, S. J. Chen, and C. J. Wang, “A Graphical User-Interface Control System at SRRC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1878-1881. 
[n]	I. S. Ko et al., “BEAM DIAGNOSTICS WITH A STREAK CAMERA IN PLS STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP048, pp. XX-XX. 
[n]	F. F. Hall, “Quick Approximations for the HE3 Points of State”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 122-125. 
[n]	L. Huang, J. Chen, W. Liu, X. Liu, and Y. Han, “Booster conceptual design of the Southern Advanced Photon Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 400-403. doi:10.18429/JACoW-IPAC2023-MOPA147
[n]	I. Kesgin et al., “Recent advances in superconducting undulators at the  Advanced Photon Source”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS086, unpublished. 
[n]	S. Machida, “Space-Charge Calculations in Synchrotrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3224-3229. 
[n]	D. Carrillo et al., “Design, manufacturing and validation of the CLIQ units for the protection of superconducting magnets for the High-Luminosity LHC project at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3382-3385. doi:10.18429/JACoW-IPAC2024-THPG51
[n]	K. J. Anderson, Y. Hao, and L. H. Yu, “Study of Nonlinear Dynamics in the 4-D H?®non Map Using the Square Matrix Method and Iterative Methods”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 232-235. doi:10.18429/JACoW-NAPAC2022-MOPA81
[n]	C. Birattari et al., “Cyclotron Production of Pt, Pd and Rh Radiotracers to Study the Environmental Impact of the Catalytic Converter Emissions”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-04, pp. 545-548. 
[n]	A. A. Mikhailichenko, “Some Features of Superconducting Dual Bore Lens”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP111, pp. 3218-3220. 
[n]	A. V. Butenko et al., “The NICA Complex Injection Facility”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 7-11. doi:10.18429/JACoW-RuPAC2021-MOY01
[n]	C.-Y. Tsai, Q. Luo, and W. Qin, “Using Stretching-Modulation-Compression effect to generate isolated few-femtosecond MeV electron bunches”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2691, unpublished. 
[n]	V. N. Buldakovsky et al., “Beam Extraction System of the Synchrophasotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3015-3018. 
[n]	W. B. Herrmannsfeldt, “The SLAC Recirculating Linear Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 910-914. 
[n]	J. Frank, M. Arlandoo, P. Goslawski, J. Li, T. Mertens, and M. Ries, “Important Drift Space Contributions to Non-Linear Beam Dynamics”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1914-1916. doi:10.18429/JACoW-IPAC2021-TUPAB213
[n]	G. Wuestefeld, J. Feikes, and J. Kuszynski, “Beam Lifetime Optimisation of the BESSY II Storage Ring  by Systematically Adjusting the Harmonic Sextupole Strength ”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI024, pp. 775-777. 
[n]	E. Laface, C. G. Maiano, P. Pierini, and M. Y. Wang, “Tuning of Superconducting Cavities Using the FFT of Transmitted Power”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1268-1270. doi:10.18429/JACoW-IPAC2022-TUPOTK028
[n]	P. D. Hermes, K. A. Dewhurst, A. S. Fomin, D. Mirarchi, and S. Redaelli, “Layouts for Feasibility Studies of Fixed-Target Experiments at the LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2134-2137. doi:10.18429/JACoW-IPAC2022-WEPOTK033
[n]	T. Atkinson et al., “A Longitudinal Kicker Cavity for the BESSY II Booster”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 150-153. doi:10.18429/JACoW-IBIC2019-MOPP026
[n]	N. Pogue, T. L. Houck, and B. R. Poole, “Using Drive Rods in Inductions Cells to Reduce the Beam Break Up Instability”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4658-4661. doi:10.18429/JACoW-IPAC2018-THPML006
[n]	A. Afonine et al., “The Investigations of Beam Extraction and Collimation at U-70 Proton Synchrotron of IHEP by Using Short Silicon Crystals”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE088, pp. 2511-2513. 
[n]	N. Marks, J. A. Clarke, and D. J. Holder, “Magnetic Design of the Dipole Magnets for the DIAMOND Synchrotron Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE056, pp. 2364-2366. 
[n]	U. Laier et al., “Status and Recent Development of FAIR Ring RF Systems”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1037-1040. doi:10.18429/JACoW-IPAC2021-MOPAB334
[n]	Y. D. Chernousov and I. V. Shebolaev, “Gradient Limitations for RF Accelerator on Parallel-Coupled Structure”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 226-228. doi:10.18429/JACoW-RUPAC2016-TUPSA008
[n]	L. Piersanti et al., “Commissioning and First Results of an X-Band LLRF System for TEX Test Facility at LNF-INFN”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 876-879. doi:10.18429/JACoW-IPAC2022-TUPOST015
[n]	S. V. Plotnikov, “Features of Acceleration and Focusing of Cluster Ion Beam in Resonant Linac Structures”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 304-307. doi:10.18429/JACoW-RUPAC2018-WEPSB11
[n]	Y. Ishi, T. Uesugi, and Y. Mori, “A conceptual design of FFA ring for super heavy element production adopting the ERIT mechanism.”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 955-957. doi:10.18429/JACoW-IPAC2023-MOPL179
[n]	K. Ha et al., “NSLS-II bunch by bunch BPM development and beam operation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2191-2194. doi:10.18429/JACoW-IPAC2024-WEPG08
[n]	R. A. Marsh, V. A. Dolgashev, M. A. Shapiro, S. G. Tantawi, and R. J. Temkin, “X-Band Photonic Bandgap (PBG) Structure Breakdown Experiment”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC06, pp. 3163-3165. 
[n]	W. Van Goethem, F. Antoniou, F. Asvesta, H. Bartosik, and A. Huschauer, “Improved Low-Energy Optics Control for Transverse Emittance Preservation at the CERN Proton Synchrotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 507-510. doi:10.18429/JACoW-IPAC2022-MOPOTK029
[n]	Z. D. Farkas, “Beam Loading Compensation with Variable Group Velocity”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-40, pp. 410-412. 
[n]	A. Dainelli, A. Lombardi, A. Ratti, and A. G. Ruggiero, “The ADRIA Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2820-2823. 
[n]	H. Zhang et al., “C-band RF system for the SAPS test bench”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 98-100. doi:10.18429/JACoW-LINAC2024-MOPB028
[n]	V. A. Bomko, M. I. Ayzatsky, A. F. Kobets, Yu. V. Meleshkova, Z. E. Ptukhina, and B. V. Zajtsev, “Particle Dynamic in the Ion Linear Accelerator based on Alternating Phase Focusing with Moving Center of the Bunch”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI069, pp. 1613-1615. 
[n]	G. Guignard, K. Potter, and A. Verdier, “Interaction Regions for e-p and p-p Collisions in the LEP Tunnel”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2535-2538. 
[n]	J. Olivares Herrador, N. Fuster, B. Gimeno-Martinez, D. Esperante, and A. Latina, “Beam loading effects in standing-wave linacs and their implementation into the particle tracking code RF-Track”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3466-3469. doi:10.18429/JACoW-IPAC2023-WEPL152
[n]	J. F. Patrick and S. L. Lackey, “Control Systems for Linac Test Facilities at Fermilab”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP111, pp. 334-336. 
[n]	W. R. Rawnsley, G. H. Mackenzie, and C. J. Oram, “The Production and Measurement of 150 ps Beam Pulses from the TRIUMF Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E04, pp. 237-240. 
[n]	M. S. Champion et al., “Progress on the Proton Power Upgrade Project at the Spallation Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 390-393. doi:10.18429/JACoW-LINAC2022-TUPOJO19
[n]	J. Edelen, A. Diego, J. Einstein-Curtis, J. Krasna, M. Kravchenko, and R. Berry, “Low-level RF system development for a C-Band LINAC”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 261-263. doi:10.18429/JACoW-LINAC2024-MOPB098
[n]	H. Iinuma et al., “Four-dimensional phase space control with a strongly X-Y coupled beam for the three-dimensional spiral trajectory with a validation experiment with 0.12 m radius of compact storage ring”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC56, unpublished. 
[n]	H. H. Umstuetter, “Calculations on High Field Magnets with Iron Yokes and Rectangular Coils”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 723-726. 
[n]	D. Prelipcean et al., “Comparison Between Run 2 TID Measurements and FLUKA Simulations in the CERN LHC Tunnel of the Atlas Insertion Region”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 732-735. doi:10.18429/JACoW-IPAC2022-MOPOMS042
[n]	F. Zimmermann et al., “Overview of the CLIC Collimation Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH310, pp. 4071-4073. 
[n]	Y. L. Wang, T. Emoto, M. Nomura, S. T??yama, and I. Sato, “A Novel Chopper System for High Power CW Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-61, pp. 205-207. 
[n]	A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3094-3097. 
[n]	T. Higo et al., “Fabrication Process of Rounded Damped Detuned Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA01, pp. 371-373. 
[n]	K. Hiramoto and M. Nishi, “A Particle Tracking Method for Accelerators with Small Radius of Curvature”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 717-720. 
[n]	Y. Wu, F. Kroes, J. Noomen, J. van der Laan, G. Luijckx, and R. Maas, “Commissioning Results of the Amsterdam Pulse Stretcher/Storage Ring AmPS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1998-2001. 
[n]	M. Sarstedt et al., “Energy Spread of Ion Beams Generated in Multicusp Ion Sources”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB07, pp. 2542-2544. 
[n]	V. I. Shvedunov et al., “Moscow State University CW Race-Track Microtron Status”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2059-2062. 
[n]	R. Briggs, L. L. Reginato, M. Vella, S. Nelson, and D. Birx, “Transverse Impedance Measurements of the DARHT-2 Accelerator Cell”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH079, pp. 1850-1852. 
[n]	P. Emma, “First Lasing of the LCLS X-Ray FEL at 1.5 ?à”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH3PBI01, pp. 3115-3119. 
[n]	E. Allaria et al., “High level software for operating an EEHG FEL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 354-356. doi:10.18429/JACoW-IPAC2024-MOPG24
[n]	J. D. Sedillo, D. Martinez, and J. D. Nguyen, “LANSCE 1L Harp Data Acquisition System Upgrade: First Results”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 542-546. doi:10.18429/JACoW-IBIC2015-TUPB081
[n]	A. Carballedo et al., “X-Ray Facility for the Characterization of the ATHENA Mirror Modules at the ALBA Synchrotron”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 252. doi:10.18429/JACoW-MEDSI2020-WEPA12
[n]	I. Bustinduy et al., “Multi-harmonic buncher experiment overview for the ISOLDE superconducting Recoil Separator project”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6071, unpublished. 
[n]	G. Martinet et al., “Results of beta=0.12 quarter wave resonator for radioactive beams production at SPIRAL2 Facility”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP40, pp. XX-XX. 
[n]	M. G. Grzegrzolka et al., “Status of Control and Synchronization Systems Development at Institute of Electronic Systems”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 337. doi:10.18429/JACoW-ICALEPCS2019-MOPHA053
[n]	J. Benesch et al., “CEBAF 22 GeV FFA energy upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 962-964. doi:10.18429/JACoW-IPAC2023-MOPL182
[n]	D.-O. Jeon, J.-H. Jang, and J.-B. Lallement, “Tomographic reconstruction and comparison with emittance data in the RAON”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS148, unpublished. 
[n]	R. L. Geng et al., “Preliminary Cryogenic Cold Test Results of the First 9-Cell LSF Shape Cavity”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2296-2299. doi:10.18429/JACoW-IPAC2021-TUPAB342
[n]	T. Pieloni and W. Herr, “Coherent Beam-Beam Modes in the CERN Large Hadron Collider (LHC) for Multiple Bunches, Different Collisions Schemes and Machine Symmetries”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT078, pp. 4030-4032. 
[n]	J. J. Wiechecki, P. Krawczyk, R. Nietubyc, P. R. Romanowicz, and D. T. Ziemia, “Overview of the Unified Undulator Solution for the PolFEL Project”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 349-351. doi:10.18429/JACoW-MEDSI2023-THPPP050
[n]	R. Nagaoka, “Operation of ELETTRA with a Lower Emittance Optics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP085L, pp. 986-988. 
[n]	G. Torrisi et al., “Numerical Study of Photonic-Crystal-Based Dielectric Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3653-3656. doi:10.18429/JACoW-IPAC2019-THPGW033
[n]	H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265. 
[n]	R. Steerenberg et al., “Design Study for a CERN Short Base-Line Neutrino Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA052, pp. 1250-1252. 
[n]	H. Okamoto et al., “Fiber Laser Development for Dielectric Laser-driven Accelerator and Electron Beam Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4070-4072. doi:10.18429/JACoW-IPAC2016-THPOW056

For LaTeX

Use Complete Form

For BibTeX

References

Back to search