Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. A. Balmer et al., “The SRS Multipole Wiggler Vacuum Vessel Protection System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP17C, pp. 1494-1496.
[n] L. Wang, F. Chao, Y. J. Pei, L. Shang, X. Wang, and H. L. Xu, “The Novel Kicker Magnet in HLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH152, pp. 3600-3602.
[n] S. Lenci, E. L. Eisen, and M. P. McCarthy, “Status of the 805-MHz Pulsed Klystrons for the Spallation Neutron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD025, pp. 499-501.
[n] P. H. Williams, B. W. J. McNeil, B. L. Militsyn, H. L. Owen, M. W. Poole, and N. Thompson, “PULSE - A High-Repetition-Rate Linac Driver for X-ray FELs”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC035, pp. 148-150.
[n] A. Young et al., “Design of a Multi-Bunch BPM for the Next Linear Collider”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM09, pp. XX-XX.
[n] X. Yang et al., “Experiments on a BSM test bench for CSNS-II linac upgrade”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 662-666. doi:10.18429/JACoW-IBIC2025-WEPCO21
[n] F. Long, Y. P. Liu, X. Qi, and Z. H. ZhenHua, “Conceptual Design for the HEPS Power Supply System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3540-3542. doi:10.18429/JACoW-IPAC2016-THPMW004
[n] N. K. Alahari, “New Horizons in Nuclear Science: GANIL and Beyond”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIRO01, pp. XX-XX.
[n] T. Nakanishi et al., “Highly Polarized Electron Source Development in Japan”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D052, pp. 208-210.
[n] M. B. Ripert, A. Buechel, C. Dorn, A. Peters, J. Schreiner, and T. W. Winkelmann, “A Low Energy Ion Beam Pepper Pot Emittance Device”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM060, pp. 297-301.
[n] Yu. I. Semenov et al., “60 keV 30 kW Electron Beam Facility for Electron Beam Technology”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP161, pp. 1887-1889.
[n] E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
[n] G. Flanagan et al., “Evaluation and Implementation of High Performance Real-Time Signal Processing For Rayleigh Scattering Based Quench Detection for High Field Superconducting Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD041, pp. 3602-3604.
[n] C. C. Peters et al., “Understanding the Source and Impact of Errant Beam Loss in the Spallation Neutron Source (SNS) Super Conducting Linac (SCL)”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 48-53. doi:10.18429/JACoW-HB2018-MOP1WB02
[n] R. M. Brodhage, H. Podlech, U. Ratzinger, G. Clemente, and L. Groening, “First Measurements of an Coupled CH Power Cavity for the FAIR Proton Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP036, pp. 3812-3814.
[n] Q. Gu et al., “RF System for the SSRF Booster Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP087, pp. 754-756.
[n] B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 321-323. doi:10.18429/JACoW-MEDSI2018-THOPMA01
[n] F. G. Devillet et al., “Performance of IBA New Conical Shaped Niobium [18O] Water Targets”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPSH043, pp. 406-408.
[n] P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 54-57.
[n] M. Huck, J. Bahrdt, H. Huck, A. Meseck, and M. Ries, “Transverse Broad-band Impedance Studies of the New In-vacuum Cryogenic Undulator at Bessy II Storage Ring”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 263-267. doi:10.18429/JACoW-IBIC2020-THPP26
[n] Q. Fu et al., “Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1123-1125. doi:10.18429/JACoW-IPAC2018-TUPAL050
[n] K. Yoshimura et al., “New Measurements of Proton Beam Extinction at J-PARC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC099, pp. 1242-1244.
[n] J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 394-396. doi:10.18429/JACoW-ICALEPCS2017-TUPHA012
[n] Yu. M. Ado et al., “Peculiarities of the IHEP Accelerator Complex Operation with the Fast-Cycling Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 303-305.
[n] D. Esperante Pereira et al., “Construction and Commissioning of the S-Band High-Gradient RF Laboratory at IFIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3619-3622. doi:10.18429/JACoW-IPAC2018-THPAL005
[n] J. P. Sikora et al., “Using TE Wave Resonances for the Measurement of Electron Cloud Density”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR074, pp. 960-962.
[n] P. Berrutti, T. N. Khabiboulline, V. A. Lebedev, and V. P. Yakovlev, “Transverse Field Perturbation For PIP-II SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3302-3305. doi:10.18429/JACoW-IPAC2015-WEPTY019
[n] S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
[n] G. S. Levine and G. W. Bennett, “The Brookhaven AGS Radiation Monitoring Systems”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 734-736.
[n] W. Wang, K. Z. Ding, F. Jiang, S. Xu, and J. Zhou, “The Beam Dynamics Simulation of a Variable Energy Cyclotron for Isotope Production”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO014, pp. 334-337. doi:10.18429/JACoW-CYCLOTRONS2022-THPO014
[n] C. Xu et al., “Input RF Coupler Design for Energy Compensator Cavity in eRHIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1184-1186. doi:10.18429/JACoW-IPAC2017-MOPVA141
[n] C. G. Li, J. H. Li, and S. Zheng, “The Electro-magnetic Field Simulation and Cavity Design of Ridgetron for High Power Electron Irradiation Accelerator”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 58-60. doi:10.18429/JACoW-ICAP2015-TUDWC1
[n] M. Prioli et al., “Superconducting magnets technology for a European heavy ion gantry”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1880-1884. doi:10.18429/JACoW-IPAC2024-WEXN1
[n] S. Peggs et al., “The Rapid Cycling Medical Synchrotron, RCMS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI083, pp. 2754-2756.
[n] J. Ohnishi, A. Goto, M. Kase, and Y. Kotaka, “Study on Energy Upgrade and Beam Transmission Efficiencies for RIKEN K-70 AVF Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 332-335. doi:10.18429/JACoW-Cyclotrons2016-THP13
[n] M. Dal Forno, R. Vescovo, P. Craievich, and G. Penco, “Design and Field Measurements of a Linear Accelerator Endowed with Single Feed with Movable Short Coupler”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI015, pp. 2732-2734.
[n] E. Syresin, “Development of Acceleration Technique for Hadron Therapy in JINR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2171-2173. doi:10.18429/JACoW-IPAC2014-WEPRO091
[n] B. Fernandes, P. Gessler, and C. Youngman, “High Level FPGA Programming Framework Based on Simulink”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC087, pp. 782-785.
[n] J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
[n] G. Mouchaty, D. P. May, R. C. Rogers, and P. Smelser, “Performance of the Texas AM ECRIS”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-17, pp. 369-371.
[n] A. M. Porcellato et al., “On Line Performance and Upgrading of ALPI Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP010, pp. 174-178.
[n] J. Li et al., “Simulation of Magnet Field Disturbance Effect on the Third Order Resonant Extraction”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH08, pp. 41-43.
[n] Q. Wu, “The Design of a High Current 2.45 GHz Microwave Ion Source for an Electromagnetic Isotope Separator”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRP2PG027, unpublished.
[n] Y. Koshiba, T. Aoki, K. Sakaue, M. Washio, T. Takatomi, and J. Urakawa, “Development of an RF Electron Gun for Ultra-Short Bunch Generation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD058, pp. 1536-1538.
[n] F. Marhauser et al., “Fabrication and Testing Status of CEBAF 12 GeV Upgrade Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC112, pp. 337-339.
[n] Z. Huang, “Brightness and Coherence of Synchrotron Radiation and FELs”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOYCB101, pp. 16-20.
[n] P. J. Bell, V. H. Hardion, J. J. Jamroz, and J. Lidon-Simon, “Control and Data Acquisition Using TANGO and SARDANA at the Nanomax Beamline at MAX IV”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 900-904. doi:10.18429/JACoW-ICALEPCS2017-TUPHA197
[n] M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
[n] A. Chao, E. Granados, X. Huang, D. F. Ratner, and H. W. Luo, “High Power Radiation Sources using the Steady-state Microbunching Mechanism”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1048-1053. doi:10.18429/JACoW-IPAC2016-TUXB01
[n] C. M. Lyneis, J. Y. Benitez, M. M. Strohmeier, and D. S. Todd, “Coupling Microwave Power into ECR Ion Source Plasmas at Frequencies above 20 GHz”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUXO01, pp. XX-XX.
[n] M. R. Clausen et al., “Profibus in Process Controls”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO203, pp. 16-18.
[n] M. L. Neubauer et al., “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC060, pp. 3028-3030.
[n] E. Tanke, M. J. Vretenar, and M. Weiss, “Performance of the CERN High-Intensity RFQ”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH436, pp. 686-688.
[n] K. Li, H. X. Deng, Z. F. Gao, B. Liu, and D. Wang, “High degree circular polarization at x-ray self-seeding FELs with crossed-planar undulators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4453-4455. doi:10.18429/JACoW-IPAC2018-THPMK068
[n] X. J. Deng et al., “From Coherent Harmonic Generation to Steady State Microbunching”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4583-4586. doi:10.18429/JACoW-IPAC2018-THPMK113
[n] S. Seletskiy, R. P. Fliller, S. L. Kramer, and T. V. Shaftan, “Energy Interlock in the NSLS II Booster to Storage Ring Transfer Line”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1986-1988. doi:10.18429/JACoW-IPAC2014-WEPRO020
[n] K. J. Volin et al., “Magnet Module Assembly for the APS Upgrade”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 283. doi:10.18429/JACoW-MEDSI2020-WEPB07
[n] R. Baartman, K. R. Kendall, M. McDonald, D. R. Mosscrop, P. W. Schmor, and D. Yuan, “A New High Intensity DC H- Ion Source for TRIUMF”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-40, pp. 352-354.
[n] M. Kuntzsch et al., “Concept of Femtosecond Timing and Synchronization Scheme at ELBE”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO037, pp. 565-567.
[n] K. A. Brown et al., “Control Systems Issues and Planning for eRHIC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB03, pp. 58-61.
[n] K. Alrutz-Ziemssen et al., “First Operation of the Superconducting 130 MeV CW-Electron-Accelerator at Darmstadt”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH416, pp. 626-628.
[n] W. Bartmann et al., “Upgrades for the CERN PSB-TO-PS Transfer at 2 GeV”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI054, pp. 404-406.
[n] H. Harada et al., “The Result of Beam Commissioning in J-PARC 3-GeV RCS”, in Proc. HB'12, Beijing, China, Sep. 2012, paper TUO3C06, pp. 339-343.
[n] C. H. Rivetta, J. E. Dusatko, J. D. Fox, O. Turgut, S. De Santis, and W. H?Âfle, “Wideband Vertical Intra-Bunch Feedback At The SPS - 2015 Results And Path Forward”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1353-1355. doi:10.18429/JACoW-IPAC2015-TUAC2
[n] T. Kanesue, K. Ishibashi, A. Kondrashev, M. Okamura, and K. Sakakibara, “AG Acceleration using DPIS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS093, pp. 1720-1722.
[n] B. A. Kootte et al., “Quantification of the Electron Plasma in TItan's Cooler Penning Trap”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF06, pp. 39-42.
[n] A. V. Semenov et al., “Status of HITS Injector”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC026, pp. 376-378.
[n] S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 886-890. doi:10.18429/JACoW-ICALEPCS2017-TUPHA194
[n] S. Biri et al., “Application of the ATOMKI-ECRIS for Materials Research and Prospects of the Medical Utilization”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOCO-C04, pp. 41-47.
[n] S. Paret and J. Qiang, “Simulation of Colliding Beams with Feedback in LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC091, pp. 1374-1376.
[n] A. V. Rauchas, F. R. Brumwell, and G. J. Volk, “Commissioning of the Argonne Intense Pulsed Neutron Source (IPNS-I) Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3006-3009.
[n] A. Gonzalez, A. Plastun, and P. Ostroumov, “Mitigation of longitudinal beam losses in the FRIB linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 13-16. doi:10.18429/JACoW-LINAC2024-MOAA002
[n] K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
[n] Y. Sun et al., “BEPCII Superconducting RF System Operation Status”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO062, pp. 247-250.
[n] C. Bracco et al., “Experiments on the Margin of Beam Induced Quenches for LHC Superconducting Quadrupole Magnet in the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC004, pp. 124-126.
[n] M. Aiba et al., “Development of a FFAG Proton Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B21, pp. 581-583.
[n] R. Nagaoka, “Impedance Computation and Measurement in Modern Storage Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper FRXBGM01, pp. 3728-3732.
[n] I. Ortega et al., “Research and development of a radiation hard beam profile monitor for use in the CERN North Area secondary beamlines”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 350-354. doi:10.18429/JACoW-IBIC2025-TUPCO05
[n] R. Gobin et al., “High Intensity Beam Production at CEA/Saclay for the IFMIF Project”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper FRXA01, pp. 182-184.
[n] N. Nakamura, K. Haga, T. Nogami, and M. Tadano, “Study of PF-Ring Infrastructure Improvements Using Temperature Measurements in the Ring Tunnel”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1508-1511. doi:10.18429/JACoW-IPAC2021-TUPAB063
[n] A. Miura, Y. Kawane, N. Kikuzawa, T. Maruta, and T. Miyao, “Interlock of Beam Loss at Low Energy Part of J-PARC Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 405-408. doi:10.18429/JACoW-ICALEPCS2015-MOPGF137
[n] Ph. Leconte et al., “MACSC:PAC A Superconducting Accelerator Module”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 155-157.
[n] G. D. Alton and J. R. Beene, “The Holifield Radioactive Ion Beam Facility at the Oak Ridge National Laboratory: Present Status and Future Plans”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5C003, pp. 365-374.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Balmer et al., “The SRS Multipole Wiggler Vacuum Vessel Protection System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP17C, pp. 1494-1496.
- L. Wang, F. Chao, Y. J. Pei, L. Shang, X. Wang, and H. L. Xu, “The Novel Kicker Magnet in HLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH152, pp. 3600-3602.
- S. Lenci, E. L. Eisen, and M. P. McCarthy, “Status of the 805-MHz Pulsed Klystrons for the Spallation Neutron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD025, pp. 499-501.
- P. H. Williams, B. W. J. McNeil, B. L. Militsyn, H. L. Owen, M. W. Poole, and N. Thompson, “PULSE - A High-Repetition-Rate Linac Driver for X-ray FELs”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC035, pp. 148-150.
- A. Young et al., “Design of a Multi-Bunch BPM for the Next Linear Collider”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM09, pp. XX-XX.
- X. Yang et al., “Experiments on a BSM test bench for CSNS-II linac upgrade”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 662-666.
- F. Long, Y. P. Liu, X. Qi, and Z. H. ZhenHua, “Conceptual Design for the HEPS Power Supply System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3540-3542.
- N. K. Alahari, “New Horizons in Nuclear Science: GANIL and Beyond”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIRO01, pp. XX-XX.
- T. Nakanishi et al., “Highly Polarized Electron Source Development in Japan”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D052, pp. 208-210.
- M. B. Ripert, A. Buechel, C. Dorn, A. Peters, J. Schreiner, and T. W. Winkelmann, “A Low Energy Ion Beam Pepper Pot Emittance Device”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM060, pp. 297-301.
- Yu. I. Semenov et al., “60 keV 30 kW Electron Beam Facility for Electron Beam Technology”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP161, pp. 1887-1889.
- E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
- G. Flanagan et al., “Evaluation and Implementation of High Performance Real-Time Signal Processing For Rayleigh Scattering Based Quench Detection for High Field Superconducting Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD041, pp. 3602-3604.
- C. C. Peters et al., “Understanding the Source and Impact of Errant Beam Loss in the Spallation Neutron Source (SNS) Super Conducting Linac (SCL)”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 48-53.
- R. M. Brodhage, H. Podlech, U. Ratzinger, G. Clemente, and L. Groening, “First Measurements of an Coupled CH Power Cavity for the FAIR Proton Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP036, pp. 3812-3814.
- Q. Gu et al., “RF System for the SSRF Booster Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP087, pp. 754-756.
- B. Laluc, T. Maillard, and A. Riquer, “Piezo Technology in Synchrotron”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 321-323.
- F. G. Devillet et al., “Performance of IBA New Conical Shaped Niobium [18O] Water Targets”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPSH043, pp. 406-408.
- P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 54-57.
- M. Huck, J. Bahrdt, H. Huck, A. Meseck, and M. Ries, “Transverse Broad-band Impedance Studies of the New In-vacuum Cryogenic Undulator at Bessy II Storage Ring”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 263-267.
- Q. Fu et al., “Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1123-1125.
- K. Yoshimura et al., “New Measurements of Proton Beam Extinction at J-PARC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC099, pp. 1242-1244.
- J. J. Chang, S. An, X. J. Liu, P. P. Wang, Y. J. Yuan, and W. Zhang, “New Control System for LAPECR2”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 394-396.
- Yu. M. Ado et al., “Peculiarities of the IHEP Accelerator Complex Operation with the Fast-Cycling Booster”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 303-305.
- D. Esperante Pereira et al., “Construction and Commissioning of the S-Band High-Gradient RF Laboratory at IFIC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3619-3622.
- J. P. Sikora et al., “Using TE Wave Resonances for the Measurement of Electron Cloud Density”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR074, pp. 960-962.
- P. Berrutti, T. N. Khabiboulline, V. A. Lebedev, and V. P. Yakovlev, “Transverse Field Perturbation For PIP-II SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3302-3305.
- S. Boucher et al., “Compact, Inexpensive X-band Linacs as Radioactive Isotope Source Replacements”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA051, pp. 3746-3748.
- G. S. Levine and G. W. Bennett, “The Brookhaven AGS Radiation Monitoring Systems”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 734-736.
- W. Wang, K. Z. Ding, F. Jiang, S. Xu, and J. Zhou, “The Beam Dynamics Simulation of a Variable Energy Cyclotron for Isotope Production”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO014, pp. 334-337.
- C. Xu et al., “Input RF Coupler Design for Energy Compensator Cavity in eRHIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1184-1186.
- C. G. Li, J. H. Li, and S. Zheng, “The Electro-magnetic Field Simulation and Cavity Design of Ridgetron for High Power Electron Irradiation Accelerator”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 58-60.
- M. Prioli et al., “Superconducting magnets technology for a European heavy ion gantry”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEXN1, pp. 1880-1884.
- S. Peggs et al., “The Rapid Cycling Medical Synchrotron, RCMS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI083, pp. 2754-2756.
- J. Ohnishi, A. Goto, M. Kase, and Y. Kotaka, “Study on Energy Upgrade and Beam Transmission Efficiencies for RIKEN K-70 AVF Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 332-335.
- M. Dal Forno, R. Vescovo, P. Craievich, and G. Penco, “Design and Field Measurements of a Linear Accelerator Endowed with Single Feed with Movable Short Coupler”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI015, pp. 2732-2734.
- E. Syresin, “Development of Acceleration Technique for Hadron Therapy in JINR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2171-2173.
- B. Fernandes, P. Gessler, and C. Youngman, “High Level FPGA Programming Framework Based on Simulink”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC087, pp. 782-785.
- J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
- G. Mouchaty, D. P. May, R. C. Rogers, and P. Smelser, “Performance of the Texas AM ECRIS”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-17, pp. 369-371.
- A. M. Porcellato et al., “On Line Performance and Upgrading of ALPI Resonators”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP010, pp. 174-178.
- J. Li et al., “Simulation of Magnet Field Disturbance Effect on the Third Order Resonant Extraction”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH08, pp. 41-43.
- Q. Wu, “The Design of a High Current 2.45 GHz Microwave Ion Source for an Electromagnetic Isotope Separator”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRP2PG027, unpublished.
- Y. Koshiba, T. Aoki, K. Sakaue, M. Washio, T. Takatomi, and J. Urakawa, “Development of an RF Electron Gun for Ultra-Short Bunch Generation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD058, pp. 1536-1538.
- F. Marhauser et al., “Fabrication and Testing Status of CEBAF 12 GeV Upgrade Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC112, pp. 337-339.
- Z. Huang, “Brightness and Coherence of Synchrotron Radiation and FELs”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOYCB101, pp. 16-20.
- P. J. Bell, V. H. Hardion, J. J. Jamroz, and J. Lidon-Simon, “Control and Data Acquisition Using TANGO and SARDANA at the Nanomax Beamline at MAX IV”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 900-904.
- M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
- A. Chao, E. Granados, X. Huang, D. F. Ratner, and H. W. Luo, “High Power Radiation Sources using the Steady-state Microbunching Mechanism”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1048-1053.
- C. M. Lyneis, J. Y. Benitez, M. M. Strohmeier, and D. S. Todd, “Coupling Microwave Power into ECR Ion Source Plasmas at Frequencies above 20 GHz”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUXO01, pp. XX-XX.
- M. R. Clausen et al., “Profibus in Process Controls”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO203, pp. 16-18.
- M. L. Neubauer et al., “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC060, pp. 3028-3030.
- E. Tanke, M. J. Vretenar, and M. Weiss, “Performance of the CERN High-Intensity RFQ”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH436, pp. 686-688.
- K. Li, H. X. Deng, Z. F. Gao, B. Liu, and D. Wang, “High degree circular polarization at x-ray self-seeding FELs with crossed-planar undulators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4453-4455.
- X. J. Deng et al., “From Coherent Harmonic Generation to Steady State Microbunching”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4583-4586.
- S. Seletskiy, R. P. Fliller, S. L. Kramer, and T. V. Shaftan, “Energy Interlock in the NSLS II Booster to Storage Ring Transfer Line”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1986-1988.
- K. J. Volin et al., “Magnet Module Assembly for the APS Upgrade”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 283.
- R. Baartman, K. R. Kendall, M. McDonald, D. R. Mosscrop, P. W. Schmor, and D. Yuan, “A New High Intensity DC H- Ion Source for TRIUMF”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-40, pp. 352-354.
- M. Kuntzsch et al., “Concept of Femtosecond Timing and Synchronization Scheme at ELBE”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO037, pp. 565-567.
- K. A. Brown et al., “Control Systems Issues and Planning for eRHIC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB03, pp. 58-61.
- K. Alrutz-Ziemssen et al., “First Operation of the Superconducting 130 MeV CW-Electron-Accelerator at Darmstadt”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH416, pp. 626-628.
- W. Bartmann et al., “Upgrades for the CERN PSB-TO-PS Transfer at 2 GeV”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI054, pp. 404-406.
- H. Harada et al., “The Result of Beam Commissioning in J-PARC 3-GeV RCS”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper TUO3C06, pp. 339-343.
- C. H. Rivetta, J. E. Dusatko, J. D. Fox, O. Turgut, S. De Santis, and W. H?Âfle, “Wideband Vertical Intra-Bunch Feedback At The SPS - 2015 Results And Path Forward”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1353-1355.
- T. Kanesue, K. Ishibashi, A. Kondrashev, M. Okamura, and K. Sakakibara, “AG Acceleration using DPIS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS093, pp. 1720-1722.
- B. A. Kootte et al., “Quantification of the Electron Plasma in TItan's Cooler Penning Trap”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF06, pp. 39-42.
- A. V. Semenov et al., “Status of HITS Injector”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC026, pp. 376-378.
- S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 886-890.
- S. Biri et al., “Application of the ATOMKI-ECRIS for Materials Research and Prospects of the Medical Utilization”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOCO-C04, pp. 41-47.
- S. Paret and J. Qiang, “Simulation of Colliding Beams with Feedback in LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC091, pp. 1374-1376.
- A. V. Rauchas, F. R. Brumwell, and G. J. Volk, “Commissioning of the Argonne Intense Pulsed Neutron Source (IPNS-I) Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3006-3009.
- A. Gonzalez, A. Plastun, and P. Ostroumov, “Mitigation of longitudinal beam losses in the FRIB linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 13-16.
- K. Nakao et al., “Control and Support System for LEBRA FEL Operation”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH065, pp. 391-393.
- Y. Sun et al., “BEPCII Superconducting RF System Operation Status”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO062, pp. 247-250.
- C. Bracco et al., “Experiments on the Margin of Beam Induced Quenches for LHC Superconducting Quadrupole Magnet in the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC004, pp. 124-126.
- M. Aiba et al., “Development of a FFAG Proton Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B21, pp. 581-583.
- R. Nagaoka, “Impedance Computation and Measurement in Modern Storage Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper FRXBGM01, pp. 3728-3732.
- I. Ortega et al., “Research and development of a radiation hard beam profile monitor for use in the CERN North Area secondary beamlines”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 350-354.
- R. Gobin et al., “High Intensity Beam Production at CEA/Saclay for the IFMIF Project”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper FRXA01, pp. 182-184.
- N. Nakamura, K. Haga, T. Nogami, and M. Tadano, “Study of PF-Ring Infrastructure Improvements Using Temperature Measurements in the Ring Tunnel”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1508-1511.
- A. Miura, Y. Kawane, N. Kikuzawa, T. Maruta, and T. Miyao, “Interlock of Beam Loss at Low Energy Part of J-PARC Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 405-408.
- Ph. Leconte et al., “MACSC:PAC A Superconducting Accelerator Module”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 155-157.
- G. D. Alton and J. R. Beene, “The Holifield Radioactive Ion Beam Facility at the Oak Ridge National Laboratory: Present Status and Future Plans”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5C003, pp. 365-374.
Back to search