Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Nilsson, M. Eshraqi, J. F. Esteban M??ller, Y. Levinsen, N. Milas, and R. Miyamoto, “Beam Dynamics Simulation with an Updated Model for the ESS Ion Source and Low Energy Beam Transport”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1042-1045. doi:10.18429/JACoW-IPAC2019-MOPTS083
[n] P. Ausset et al., “SPIRAL2 Injector Diagnostics”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD27, pp. 110-112.
[n] S. Takeuchi and M. Matsuda, “Status of the Superconducting Heavy-Ion Tandem-Booster Linac at JAERI”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4011, pp. 67-69.
[n] H. S. Xu, Y. M. Peng, and N. Wang, “The Study of Single-Bunch Instabilities in the Ramping Process in the HEPS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 206-209. doi:10.18429/JACoW-IPAC2019-MOPGW052
[n] H. Hahn, S. Bellavia, I. Ben-Zvi, and E. M. Choi, “Design of the Fundamental Mode Damper and the HOM Dampers for the 56 MHz SRF Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP036, pp. 900-902.
[n] D. Wang et al., “Design and Beam Dynamics of the CEPC Booster”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 146. doi:10.18429/JACoW-eeFACT2018-TUPAB06
[n] Y. Kotaka et al., “Development of Low-Energy Heavy-Ion Beams by the RIKEN AVF Cyclotron and Hyper ECR Ion Source of CNS”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA10, pp. 58-61.
[n] H. Hsieh, M. Modena, M. Preger, C. Sanelli, and S. Vescovi, “Magnetic Measurements of the Dipole, Quadrupole and Sextupole Prototypes for the Accumulator of DAFNE, the Frascati PHI-Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP059G, pp. 2182-2184.
[n] L. Palumbo, “Status of SPARX Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC026, pp. 121-123.
[n] R. Cee, T. Haberer, A. Peters, S. Scheloske, and T. Winkelmann, “Intensity Upgrade Programme for the HIT Injector Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP113, pp. 1788-1790.
[n] N. Vinokurov et al., “Status and Prospects of the Novosibirsk FEL Facility”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHY01, pp. 133-135.
[n] S. W. Jang et al., “Developments of 4GSR BPM Electronics”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 87-89. doi:10.18429/JACoW-IBIC2023-MOP030
[n] T. Hellert, H. Hoschauer, K. Iliev, G. Martino, A. Sulc, and C. Tennant, “ARIEL: Agentic Retrieval Interface for Electronic Logbooks”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6326, unpublished.
[n] C. Steier et al., “Successful Completion of the ALS Brightness Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB2, pp. 433-435.
[n] F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
[n] M. Mohamadian, H. Afarideh, S. Sabounchi, M. Salehi, and M. Ghergherehchi, “Equivalent Circuit Model of Cyclotron RF System”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 39-41. doi:10.18429/JACoW-Cyclotrons2016-MODM03
[n] G. Loisch et al., “Optimisation of High Transformer Ratio Plasma Wakefield Acceleration at PITZ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1648-1650. doi:10.18429/JACoW-IPAC2018-TUPML047
[n] M. Kuntzsch et al., “Electron Bunch Diagnostic at the Upgraded ELBE Accelerator: Status and Challenges”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOBL3, pp. 23-25.
[n] H. Ikeda, M. Arinaga, J. W. Flanagan, H. Fukuma, and M. Tobiyama, “Beam Loss Monitor at SuperKEKB”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD22, pp. 459-462.
[n] H. Saito et al., “Characteristics of Polarized Coherent Radiation in Thz Region From a Crossed-Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1769-1771. doi:10.18429/JACoW-IPAC2019-TUPRB038
[n] O. Pinazza et al., “How Low-Cost Devices Can Help on the Way to ALICE Upgrade”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 114-117. doi:10.18429/JACoW-ICALEPCS2017-MODPL07
[n] J. Litzel, “Coherent nanophotonic electron accelerator”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOYA002, unpublished.
[n] A. Kurup et al., “Optimisation of the Beam Line for COMET Phase-I”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA074, pp. 2681-2683.
[n] Y. Yang et al., “Investigation of Vibrations Attenuation with Different Frequency Along HEPS Ground”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 48-50. doi:10.18429/JACoW-MEDSI2023-TUPYP015
[n] A. Vivoli et al., “SOLEIL Storage Ring Upgrade Performance in Presence of Lattice Imperfections”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 350-352. doi:10.18429/JACoW-IPAC2019-MOPGW097
[n] G. J. Portmann et al., “High-Level Controls Upgrade at the ALS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP016, pp. 4805-4807.
[n] N. Terunuma, “Instrumentation for the ATF2 Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEZMH02, pp. 2397-2401.
[n] L. Bojtar, “Antiproton Decelerator Status Report”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOM1MCIO02, pp. XX-XX.
[n] D. Y. Yin et al., “Study of the Heavy Ion Bunch Compression in CSRm”, in Proc. SAP'14, Lanzhou, China, Aug. 2014, paper WEPH11, pp. 51-53.
[n] K. Kostro et al., “Controls Middleware - The New Generation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO031, pp. 2028-2030.
[n] A. F. D. Morgan and G. Rehm, “Initial Work on the Design of a Longitudinal Bunch-by-Bunch Feedback Kicker at Diamond”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 197-201. doi:10.18429/JACoW-IBIC2015-MOPB064
[n] K. M. Thompson, S. Kim, R. Lari, and L. R. Turner, “Quadrupole Magnet for the APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 396-399.
[n] A. P. Shishlo, A. V. Aleksandrov, A. P. Zhukov, and Y. Liu, “Model Based Optics Studies in the MEBT Section of SNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 814-816. doi:10.18429/JACoW-IPAC2017-MOPIK118
[n] A. Ferran Pousa, R. W. Assmann, and A. Martinez de la Ossa, “VisualPIC: A New Data Visualizer and Post-Processor for Particle-in-Cell Codes”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1696-1698. doi:10.18429/JACoW-IPAC2017-TUPIK007
[n] W. Turner et al., “Development of a Longitudinal Density Monitor for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB052, pp. 2530-2532.
[n] S. Wang et al., “Evolution of realistic beam distributions in space-charge-dominated electron beams”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP038, unpublished.
[n] G. Castro et al., “Application of Optical Emission Spectroscopy to High Current Proton Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1721-1723. doi:10.18429/JACoW-IPAC2017-TUPIK020
[n] G. Weiss, “EPICS pva Access Control at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1516. doi:10.18429/JACoW-ICALEPCS2019-WESH2002
[n] V. Samulyak, M. Chung, A. V. Tollestrup, K. Yonehara, R. D. Ryne, and K. Yu, “Algorithms and Self-consistent Simulations of Beam-induced Plasma in Muon Cooling Devices”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA06, pp. 186-188.
[n] J. Wei et al., “The FRIB Superconducting Linac - Status and Plans”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-LINAC2016-MO1A01
[n] B. S. Han, W. G. Kang, S. M. Kim, N. K. Kuksanov, and R. A. Salimov, “High Voltage ELV Accelerators for Industrial Application (Family of Accelerators and Tendency of Development)”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRBCH03, pp. 227-229.
[n] A. I. Senchenko and D. E. Berkaev, “VEPP-2000 Logging System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD14, pp. 32-34.
[n] M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 352-354. doi:10.18429/JACoW-IPAC2017-MOPAB096
[n] H. P. Jiang et al., “SESRI 300 MeV Proton and Heavy Ion Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 998-1000. doi:10.18429/JACoW-IPAC2019-MOPTS060
[n] T. Tortschanoff et al., “Performance of the First LHC Main Quadrupoles Made in Industry”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE007, pp. 1948-1950.
[n] D. P. Hajra, D. Adak, R. K. Bhandari, J. Chaudhuri, and B. C. Mondal, “Cyclotron RF Structures Leaks, Causes and Repair”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA058, pp. 706-707.
[n] D. Bafia et al., “Design, fabrication and concept for the surface treatment of the SRF cavity prototype for the CLIC damping rings”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP24, unpublished.
[n] A. Verdier and J. M. Veuillen, “Addition of a Beam-Beam Element to MAD. LEP Simulation Results”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 893-896.
[n] H. Deruyter et al., “Damped and Detuned Accelerator Structures”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO432, pp. 132-134.
[n] M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710.
[n] C. D. Beard et al., “Conceptual Design for the ARIEL 300 keV Electron Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP017, pp. 847-849.
[n] A. Aleksandrov, J. D. Galambos, J. A. Holmes, R. J. Macek, F. Merrill, and D. K. Olsen, “Analysis of Beam Profile Broadening at High Intensity in the PSR Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3A08, pp. 936-938.
[n] A. Noda et al., “Latest Results of Experimental Approach to Ultra-cold Beam at S-LSR”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THAM1HA02, pp. 157-161.
[n] S. N. Sedykh et al., “Experiment on RF Heating of the Copper Cavity - the Imitator of the CLIC High-Gradient Accelerating Structure”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA006, pp. 47-49.
[n] J. N. Li, W. Q. Chen, F. Guo, and W. Jia, “A Low Jitter Pulse Generator Based on Two-stage Storage Module”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA023, pp. 711-713.
[n] E. Syresin et al., “Development of Accelerators and Detector Systems for Radiacian Medicine in DLNP JINR”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper FRCHA01, pp. 402-404.
[n] P. Collier et al., “Preparation of the SPS as LHC Injector”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP03C, pp. 335-337.
[n] A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
[n] A. Koschik et al., “Gantry 3: Further Development of the PSI PROSCAN Proton Therapy Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2275-2277. doi:10.18429/JACoW-IPAC2015-TUPWI016
[n] J. Tamura, H. Ao, H. Asano, T. Morishita, N. Ouchi, and Y. Sawabe, “Recovery Efforts from the Tohoku Earthquake and Energy Upgrade Preparation of the Beam Transport from the J-PARC Linac to the 3-GeV Synchrotron”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB021, pp. 891-893.
[n] L. G. Zhang et al., “Parallel Particle Movement Simulation Algorithm Based on Heterogeneous Computing”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2654-2657. doi:10.18429/JACoW-IPAC2016-WEPMY043
[n] K. Kishiyama, S. Shen, D. Behne, N. G. Wilson, D. Schrage, and R. Valdiviez, “Testing of Vacuum Pumps for the APT/LEDA RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4095, pp. 624-626.
[n] K. Agari, Y. Morino, Y. Sato, and A. Toyoda, “Upgrades of Temperature Measurements and Interlock System for the Production Target at J-PARC Hadoron Experimental Facility”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 371-373. doi:10.18429/JACoW-ICALEPCS2015-MOPGF123
[n] N. Biancacci et al., “Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THOBB102, pp. 3106-3108.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Nilsson, M. Eshraqi, J. F. Esteban M??ller, Y. Levinsen, N. Milas, and R. Miyamoto, “Beam Dynamics Simulation with an Updated Model for the ESS Ion Source and Low Energy Beam Transport”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1042-1045.
- P. Ausset et al., “SPIRAL2 Injector Diagnostics”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD27, pp. 110-112.
- S. Takeuchi and M. Matsuda, “Status of the Superconducting Heavy-Ion Tandem-Booster Linac at JAERI”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4011, pp. 67-69.
- H. S. Xu, Y. M. Peng, and N. Wang, “The Study of Single-Bunch Instabilities in the Ramping Process in the HEPS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 206-209.
- H. Hahn, S. Bellavia, I. Ben-Zvi, and E. M. Choi, “Design of the Fundamental Mode Damper and the HOM Dampers for the 56 MHz SRF Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP036, pp. 900-902.
- D. Wang et al., “Design and Beam Dynamics of the CEPC Booster”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 146.
- Y. Kotaka et al., “Development of Low-Energy Heavy-Ion Beams by the RIKEN AVF Cyclotron and Hyper ECR Ion Source of CNS”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA10, pp. 58-61.
- H. Hsieh, M. Modena, M. Preger, C. Sanelli, and S. Vescovi, “Magnetic Measurements of the Dipole, Quadrupole and Sextupole Prototypes for the Accumulator of DAFNE, the Frascati PHI-Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP059G, pp. 2182-2184.
- L. Palumbo, “Status of SPARX Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC026, pp. 121-123.
- R. Cee, T. Haberer, A. Peters, S. Scheloske, and T. Winkelmann, “Intensity Upgrade Programme for the HIT Injector Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP113, pp. 1788-1790.
- N. Vinokurov et al., “Status and Prospects of the Novosibirsk FEL Facility”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WECHY01, pp. 133-135.
- S. W. Jang et al., “Developments of 4GSR BPM Electronics”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP030, pp. 87-89.
- T. Hellert, H. Hoschauer, K. Iliev, G. Martino, A. Sulc, and C. Tennant, “ARIEL: Agentic Retrieval Interface for Electronic Logbooks”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6326, this conference.
- C. Steier et al., “Successful Completion of the ALS Brightness Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB2, pp. 433-435.
- F. H. O et al., “Status of the Praseodymium Undulator with Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA081, pp. 2298-2300.
- M. Mohamadian, H. Afarideh, S. Sabounchi, M. Salehi, and M. Ghergherehchi, “Equivalent Circuit Model of Cyclotron RF System”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 39-41.
- G. Loisch et al., “Optimisation of High Transformer Ratio Plasma Wakefield Acceleration at PITZ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1648-1650.
- M. Kuntzsch et al., “Electron Bunch Diagnostic at the Upgraded ELBE Accelerator: Status and Challenges”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOBL3, pp. 23-25.
- H. Ikeda, M. Arinaga, J. W. Flanagan, H. Fukuma, and M. Tobiyama, “Beam Loss Monitor at SuperKEKB”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD22, pp. 459-462.
- H. Saito et al., “Characteristics of Polarized Coherent Radiation in Thz Region From a Crossed-Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1769-1771.
- O. Pinazza et al., “How Low-Cost Devices Can Help on the Way to ALICE Upgrade”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 114-117.
- J. Litzel, “Coherent nanophotonic electron accelerator”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOYA002, unpublished.
- A. Kurup et al., “Optimisation of the Beam Line for COMET Phase-I”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA074, pp. 2681-2683.
- Y. Yang et al., “Investigation of Vibrations Attenuation with Different Frequency Along HEPS Ground”, in Proc. MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper TUPYP015, pp. 48-50.
- A. Vivoli et al., “SOLEIL Storage Ring Upgrade Performance in Presence of Lattice Imperfections”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 350-352.
- G. J. Portmann et al., “High-Level Controls Upgrade at the ALS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP016, pp. 4805-4807.
- N. Terunuma, “Instrumentation for the ATF2 Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEZMH02, pp. 2397-2401.
- L. Bojtar, “Antiproton Decelerator Status Report”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOM1MCIO02, pp. XX-XX.
- D. Y. Yin et al., “Study of the Heavy Ion Bunch Compression in CSRm”, in Proc. 12th Symposium on Accelerator Physics (SAP'14), Lanzhou, China, Aug. 2014, paper WEPH11, pp. 51-53.
- K. Kostro et al., “Controls Middleware - The New Generation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO031, pp. 2028-2030.
- A. F. D. Morgan and G. Rehm, “Initial Work on the Design of a Longitudinal Bunch-by-Bunch Feedback Kicker at Diamond”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 197-201.
- K. M. Thompson, S. Kim, R. Lari, and L. R. Turner, “Quadrupole Magnet for the APS Storage Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 396-399.
- A. P. Shishlo, A. V. Aleksandrov, A. P. Zhukov, and Y. Liu, “Model Based Optics Studies in the MEBT Section of SNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 814-816.
- A. Ferran Pousa, R. W. Assmann, and A. Martinez de la Ossa, “VisualPIC: A New Data Visualizer and Post-Processor for Particle-in-Cell Codes”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1696-1698.
- W. Turner et al., “Development of a Longitudinal Density Monitor for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB052, pp. 2530-2532.
- S. Wang et al., “Evolution of realistic beam distributions in space-charge-dominated electron beams”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP038, unpublished.
- G. Castro et al., “Application of Optical Emission Spectroscopy to High Current Proton Sources”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1721-1723.
- G. Weiss, “EPICS pva Access Control at ESS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1516.
- V. Samulyak, M. Chung, A. V. Tollestrup, K. Yonehara, R. D. Ryne, and K. Yu, “Algorithms and Self-consistent Simulations of Beam-induced Plasma in Muon Cooling Devices”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA06, pp. 186-188.
- J. Wei et al., “The FRIB Superconducting Linac - Status and Plans”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. XX-XX.
- B. S. Han, W. G. Kang, S. M. Kim, N. K. Kuksanov, and R. A. Salimov, “High Voltage ELV Accelerators for Industrial Application (Family of Accelerators and Tendency of Development)”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRBCH03, pp. 227-229.
- A. I. Senchenko and D. E. Berkaev, “VEPP-2000 Logging System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD14, pp. 32-34.
- M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 352-354.
- H. P. Jiang et al., “SESRI 300 MeV Proton and Heavy Ion Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 998-1000.
- T. Tortschanoff et al., “Performance of the First LHC Main Quadrupoles Made in Industry”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE007, pp. 1948-1950.
- D. P. Hajra, D. Adak, R. K. Bhandari, J. Chaudhuri, and B. C. Mondal, “Cyclotron RF Structures Leaks, Causes and Repair”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA058, pp. 706-707.
- D. Bafia et al., “Design, fabrication and concept for the surface treatment of the SRF cavity prototype for the CLIC damping rings”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP24, unpublished.
- A. Verdier and J. M. Veuillen, “Addition of a Beam-Beam Element to MAD. LEP Simulation Results”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 893-896.
- H. Deruyter et al., “Damped and Detuned Accelerator Structures”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO432, pp. 132-134.
- M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1707-1710.
- C. D. Beard et al., “Conceptual Design for the ARIEL 300 keV Electron Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP017, pp. 847-849.
- A. Aleksandrov, J. D. Galambos, J. A. Holmes, R. J. Macek, F. Merrill, and D. K. Olsen, “Analysis of Beam Profile Broadening at High Intensity in the PSR Accumulator Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3A08, pp. 936-938.
- A. Noda et al., “Latest Results of Experimental Approach to Ultra-cold Beam at S-LSR”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THAM1HA02, pp. 157-161.
- S. N. Sedykh et al., “Experiment on RF Heating of the Copper Cavity - the Imitator of the CLIC High-Gradient Accelerating Structure”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA006, pp. 47-49.
- J. N. Li, W. Q. Chen, F. Guo, and W. Jia, “A Low Jitter Pulse Generator Based on Two-stage Storage Module”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA023, pp. 711-713.
- E. Syresin et al., “Development of Accelerators and Detector Systems for Radiacian Medicine in DLNP JINR”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper FRCHA01, pp. 402-404.
- P. Collier et al., “Preparation of the SPS as LHC Injector”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP03C, pp. 335-337.
- A. Adelmann, S. R. A. Adam, M. Humbel, and P. A. Schmelzbach, “High Intensity Cyclotron Simulations: Towards Quantitative Predictions”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAX04, pp. 202-204.
- A. Koschik et al., “Gantry 3: Further Development of the PSI PROSCAN Proton Therapy Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2275-2277.
- J. Tamura, H. Ao, H. Asano, T. Morishita, N. Ouchi, and Y. Sawabe, “Recovery Efforts from the Tohoku Earthquake and Energy Upgrade Preparation of the Beam Transport from the J-PARC Linac to the 3-GeV Synchrotron”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB021, pp. 891-893.
- L. G. Zhang et al., “Parallel Particle Movement Simulation Algorithm Based on Heterogeneous Computing”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2654-2657.
- K. Kishiyama, S. Shen, D. Behne, N. G. Wilson, D. Schrage, and R. Valdiviez, “Testing of Vacuum Pumps for the APT/LEDA RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4095, pp. 624-626.
- K. Agari, Y. Morino, Y. Sato, and A. Toyoda, “Upgrades of Temperature Measurements and Interlock System for the Production Target at J-PARC Hadoron Experimental Facility”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 371-373.
- N. Biancacci et al., “Beam Coupling Impedance Localization Technique Validation and Measurements in the CERN Machines”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THOBB102, pp. 3106-3108.
Back to search