Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. A. Goryashko and V. G. Ziemann, “Longitudinal Coherence in an FEL With a Reduced Level of Shot Noise”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEOANO03, pp. 469-473.
[n] V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
[n] S. Srivastava and V. S. Pandit, “A New Scheme for Direct Estimation of PID Controller Parameters”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD43, pp. 76-78.
[n] T. Planche, R. A. Baartman, I. V. Bylinskii, and Y.-N. Rao, “Space-charge Simulation of TRIUMF 500 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 254-257. doi:10.18429/JACoW-Cyclotrons2016-WEA03
[n] A. Nicoletti and M. Martino, “Data-driven Controller Design Using the CERN Power Converter Control Libraries (CCLIBS)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1335-1337. doi:10.18429/JACoW-IPAC2019-TUPMP039
[n] Q. Chen and Q. Luo, “Conceptual design of collision feedback system for the Super Tau-Charm Facility”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 483-487. doi:10.18429/JACoW-IBIC2025-TUPMO11
[n] S. Redaelli et al., “Quench Tests at the Large Hadron Collider with Collimation Losses at 3.5 Z TeV”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP245, pp. 157-161.
[n] J. E. Griffin, J. A. MacLachlan, and A. Moretti, “Design of the rf Cavity and Power Ampifier for the Fermilab Antiproton Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3435-3438.
[n] C. Serrano, L. R. Doolittle, A. Ratti, and A. Vaccaro, “Ensemble Cavity Control System Simulation Using Pulse-to-pulse Calibration”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC150, pp. 1422-1424.
[n] M. J. Lee, “Steady-State Beam Loading of a Standing Wave Linac RF System”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper B-8, pp. 114-122.
[n] M. Klein et al., “Studies of Bunch Distortion and Bursting Threshold in the Generation of Coherent THz-Radiation at the ANKA Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP095, pp. 4761-4763.
[n] V. Palmieri, F. Stivanello, and M. Valentino, “Flux-Gate Magnetometry: The Possibility to Apply a Novel Tool to Monitor Niobium Chemistry”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP006, pp. 153-158.
[n] V. P. Yakovlev et al., “Concept EM Design of the 650 MHz Cavities for the Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP089, pp. 994-996.
[n] M. H. Helle, D. F. Gordon, D. Kaganovich, and A. Ting, “Optical Diagnostic for Off-Axis Electrons in a Laser Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP066, pp. 2948-2948.
[n] Yu-Jiuan Chen, “Space-Charge Forces of a DC Beam in a Continuous Bend”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V042, pp. 1864-1866.
[n] A. Knyazik, E. Hemsing, A. Marinelli, and J. B. Rosenzweig, “Orbital Angular Momentum Light Generated via FEL at NLCTA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP164, pp. 2420-2422.
[n] R. L. Lillestol, S. Doebert, M. Olvegaard, and E. Adli, “Experimental Results from the Test Beam Line in the CLIC Test Facility 3”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA046, pp. 1814-1816.
[n] I. Issinsky, O. Kozlov, V. Mikhailov, P. Rukoyatkin, and B. Vasilishin, “Expected Characteristics of the Nuclotron Beams for Experimental Setups”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P010, pp. 181-183.
[n] C.-J. Jing et al., “Beam Test of a Tunable Dielectric Wakefield Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP117, pp. 316-318.
[n] P. Gudewicz and E. Petit, “Capacitive Beam Position Monitors and Automatic Beam Centering in the Transfer Lines of GANIL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1142-1145.
[n] J. Debnath, J. Pradhan, M. K. Dey, C. Mallik, and R. K. Bhandari, “”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP13005, pp. XX-XX.
[n] S. Eylon, E. Henestroza, M. Vella, S. S. Yu, and C. Ekdahl, “Electron Beam, 3.5MV, 2kA Injector Diode Diagnostics for the DARHT Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH126, pp. 2380-2382.
[n] W. Namkung et al., “Commissioning of PLS 2 GeV Electron Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 742-745.
[n] N. Sei, K. Yamada, H. Ogawa, M. Yasumoto, and T. Mikado, “Proposal of New Q-Switching Technique for Storage Ring Free Electron Lasers”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20004, pp. XX-XX.
[n] D. B. Cline, X. P. Ding, and J. L. Lederman, “Higgs Boson Muon Collider Factory: h0, A, H Studies”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC042, pp. 226-228.
[n] G. Hochweller, H. Frese, V. Heynen, and W. Krechlok, “PADAC Multi-Microcomputers Basic Building Blocks for Future Control Systems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2380-2382.
[n] H. Eschelbacher and H. Schopper, “An Investigation of the Slotted Iris Structure with Drift Tubes”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-05, pp. 502-507.
[n] J.-H. Jang et al., “Beam Commissioning of KOMAC Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO066, pp. 3909-3911.
[n] S. V. Shchelkunov, J. L. Hirshfield, S. Kazakov, N. Solyak, V. P. Yakovlev, and V. E. Teryaev, “High-Power Low-Voltage Multi-Beam Klystrons for ILC and Project-X”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO19, pp. 978-980.
[n] P. Zhou and J. B. Rosenzweig, “Ion Clearing by Cyclotron Resonance Shaking”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1776-1779.
[n] S. Igarashi, Y. Kuniyasu, S. Nakamura, T. Oogoe, H. Someya, and S. Yamada, “Magnetic Field Ripple Reduction of Main Magnets of the J-PARC Main Ring using Trim Coils”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB011, pp. 301-303.
[n] N. Baboi et al., “Optimization of Beam Injection into the First Accelerating Module at TTF with Cavity Dipole Mode Signals”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM019, pp. XX-XX.
[n] D. La Civita, R. Bracco, B. Diviacco, G. Tomasin, and D. Zangrando, “FERMI@Elettra Undulator Frame Study”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC116, pp. 2276-2278.
[n] T. Khabiboulline et al., “Recent Results of Testing 3-cell 3.9 GHz Accelerating Cavity at Fermilab”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP14, pp. 267-267.
[n] G. Lambert et al., “Progress on the Generation of Undulator Radiation in the UV from a Plasma-based Electron Beam”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD47, pp. 638-641.
[n] S. A. Nikitin et al., “Record-high Resolution Experiments on Comparison of Spin Precession Frequencies of Electron Bunches Using the Resonant Depolarization Technique in the Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOBFI03, pp. 2787-2789.
[n] Z. Zhang et al., “Preliminary design of continuous wave low-level RF systems for S3FEL”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 788-791. doi:10.18429/JACoW-SRF2025-THP78
[n] R. P. Nunes and F. B. Rizzato, “An Analytical Characterization of Initially Non-Homogeneous Matched Beams at Equilibrium”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP050, pp. 4421-4423.
[n] W. Buxton, R. Frankel, and J. W. Humphrey, “The ISABELLE Half-Cell Control System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1798-1801.
[n] R. I. Farnsworth, J. P. Hammonds, B. R. Pausma, C. M. Suarez, A. Rhyder, and A. C. Starritt, “Performance Testing of EPICS User Interfaces - an Attempt to Compare the Performance of MEDM, EDM, CSS-BOY, and EPICS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB10, pp. 547-549.
[n] K. Ueshima et al., “Status of longitudinal instability suppression at NanoTerasu”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 362-366. doi:10.18429/JACoW-IBIC2025-TUPCO08
[n] J. L. Vallet, M. Vretenar, and M. Weiss, “Field Adjustment, Tuning and Beam Analysis of the High-Intensity CERN RFQ”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1234-1237.
[n] N.Kamikubota, K.Furukawa, S.Kusano, T.Obata, “Introduction of Modern Subsystems at the KEK Injector-Linac”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP025, pp. XX-XX.
[n] B. Dalena and D. Schulte, “Beam-beam Background in CLIC in Presence of Imperfections”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE025, pp. 3404-3406.
[n] P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 401-404. doi:10.18429/JACoW-ICALEPCS2015-MOPGF136
[n] T. Ohata, “Real-Time Control with VMEbus Multi-Master Configuration”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE617, pp. XX-XX.
[n] C. Benvenuti, S. Calatroni, I. E. Campisi, P. Darriulat, M. Peck, and R. Russo, “Study of the Role of the Interface Between Niobium Films and Copper RF Resonators”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D26, pp. 1050-1056.
[n] J. W. Staples et al., “Design of a VHF-band RF Photoinjector with MegaHertz Beam Repetition Rate”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN117, pp. 2990-2992.
[n] T. Lensch and M. Werner, “Machine Protection System for PETRA III”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD25, pp. 351-353.
[n] D. Dowell et al., “Analysis of Slice Emittance Measurements for the SLAC Gun Test Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB027, pp. 2104-2106.
[n] J. A. Crittenden, A. A. Mikhailichenko, E. N. Smith, K. W. Smolenski, and A. Temnykh, “Field Modelling for the CESR-c Superconducting Wiggler Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT034, pp. 2336-2338.
[n] J. O'Meara and M. Palmer, “Mechanical Design Features of the NAL 200 MeV Linac Injector”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper A-3, pp. 30-40.
[n] P. H. Williams et al., “A Recirculating Linac as a Candidate for the UK New Light Source Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP047, pp. 2376-2378.
[n] R. Laouar, E. R. Colby, R. J. England, and R. J. Noble, “Measurement of Thermal Dependencies of PBG Fiber Properties”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP276, pp. 1343-1345.
[n] A. Enomoto, “Bunching System of the KEKB Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP09, pp. 340-342.
[n] A. Intermite, M. Putignano, and C. P. Welsch, “Feasibility Study of an Optical Fibre Sensor for Beam Loss Detection Based on a SPAD Array”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB27, pp. 228-230.
[n] M. Tobiyama, “BPM Electrode and High Power Feedthrough - Special Topics in Wideband Feedthrough”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUTA02, pp. 297-301.
[n] V. P. Yakovlev, I. K. Drozdov, I. G. Gonin, N. Perunov, and N. Solyak, “Low-Beta Structure for High Energy Part of Project X”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP063, pp. 972-974.
[n] A. Citron, “Status Report on the Feasibility Study for a Superconducting Linear Accelerator for Protons”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-03, pp. 497-498.
[n] D. Van Winkle, V. A. Dolgashev, J. D. Fox, and S. G. Tantawi, “Investigations into Cost Reductions of X-band Instrumentation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP015, pp. 1559-1561.
[n] T. Tajima et al., “Evaluation and Testing of a Low-β Spoke Resonator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH057, pp. 903-905.
[n] Y. Yang, Y. B. Leng, and Y. B. Yan, “Time Measurement Method Based on CPLD for Beam Loss Position Monitor”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 98-100. doi:10.18429/JACoW-IBIC2015-MOPB030
[n] V. Chouhan et al., “Transfer of EP and doping technology for PIP-II HB650 cavities from Fermilab to industry”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 685-688. doi:10.18429/JACoW-LINAC2024-THPB026
[n] M. Jenkins and I. R. Bailey, “Novel Designs for Undulator Based Positron Sources”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD036, pp. 1485-1487.
[n] D. Curry, J. Dedic, and D. H. Thompson, “Firmware Development for SNS New Timing Master”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP087, pp. 4162-4164.
[n] F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4219-4222. doi:10.18429/JACoW-IPAC2018-THPMF064
[n] F. Zimmermann, G. Yocky, D. Whittum, D. McCormick, and S. Horton-Smith, “A Beam-Timing Monitor for the SLC Final Focus”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D035, pp. 477-479.
[n] R. Hardekopf et al., “Fabrication of MEBT Chopper for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB018, pp. 1661-1663.
[n] J. W. Ok et al., “A Diagnostics of Ion Beam from 28 GHz Electron Cyclotron Resonance Ion Source”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF12, pp. 561-564.
[n] Y. C. Nie et al., “Design of a 104-MHz Trapezoidal IH-RFQ”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP079, pp. 4962-4964.
[n] P. J. Tallerico, “A 150-kW, 450-MHz Gyrocon RF Generator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3420-3423.
[n] R. S. Moore, “Review of Recent Tevatron Operations”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOCKI01, pp. 719-721.
[n] B. Copy, “Service Oriented Status Monitoring for DIP Middleware”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper FRA003, pp. 928-930.
[n] T. Adachi, T. Kawakubo, M. Kihara, C. Ohmori, and I. Yamane, “Beam-Profile Measurement in the KEK-PS Booster Using Pulsed bum Magnets and a Movable Scraper”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1655-1658.
[n] B. Dalena, D. Boutin, A. Chanc?®, E. Cruz Alaniz, and D. Schulte, “Field Quality for the Hadron Option of Future Circular Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4397-4400. doi:10.18429/JACoW-IPAC2019-MOPMP005
[n] L. Pivetta, A. I. Bogani, and R. Passuello, “Flop: Customizing Yocto Project for MVMExxxx PowerPC and BeagleBone ARM”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 958-961. doi:10.18429/JACoW-ICALEPCS2015-WEPGF112
[n] M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
[n] C. J. Bocchetta et al., “Ion Trapping Investigations in ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1153-1156.
[n] C. Rossi et al., “Assembly and RF Tuning of the Linac4 RFQ at CERN”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB038, pp. 939-941.
[n] R. Nagaoka, “Coupling and Dispersion Correction in ELETTRA”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP083L, pp. 980-982.
[n] V. Balandin, W. Decking, and N. Golubeva, “Unclosed Lattice Dispersions as a Tool for Partial Removal of Transverse to Longitudinal Beam Correlations”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3229-3232. doi:10.18429/JACoW-IPAC2016-THPMB006
[n] E. Veyrunes, A. Asko, G. Trad, and J. Wenninger, “Interlock Super Agent : Enhancing Machine Efficiency and Performance at CERN’s Super Proton Synchrotron”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 799-801. doi:10.18429/JACoW-ICALEPCS2023-TUPDP103
[n] Shigeru. Takeda, K. Oide, and Masakazu. Yoshioka. Kikuo. Kudo, “Ground Motion Issue on the Large Accelerator Alignment”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D072, pp. 266-270.
[n] M. J. P. Adam and C. Bodnarchuk, “Combined Fixed Mask, Photon Shutter, Safety Shutter, and Collimator Design for BXDS IVU at the CLS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 309-311. doi:10.18429/JACoW-MEDSI2016-WEPE01
[n] R. G. Farber, S. J. Sibener, S. A. Willson, R. G. Hennig, and A. C. Hire, “Visualization of Sn Adsorption Behavior and Thermally Driven Diffusion Pathways on (3?ù1)-O Nb(100)”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFDV007, pp..
[n] C. J. Bocchetta, S. Tazzari, and R. P. Walker, “Status and Development of ELETTRA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B16, pp. 714-716.
[n] J. Seeman, M. E. Biagini, Y. Cai, P. Raimondi, M. K. Sullivan, and U. Wienands, “Super-B Factory using Low Emittance Storage Rings and Large Crossing Angle”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN034, pp. 1460-1462.
[n] H. Jang, J.-H. Jang, and H. Jin, “Start-to-End Simulation for RAON Superconducting Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 311-313. doi:10.18429/JACoW-IPAC2015-MOPJE016
[n] M. A. Fraser et al., “Slow Extraction Efficiency Measurements at the CERN SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 834-837. doi:10.18429/JACoW-IPAC2018-TUPAF054
[n] A. C. Garcia-Bonilla and J. F. Cardona, “Comparison between Digital Filters and Singular Value Decomposition to Reduce Noise in LHC Orbits used for Action and Phase Jump Analysis”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 83-85. doi:10.18429/JACoW-IPAC2015-MOPWA005
[n] P. Chevtsov and M. G. Tiefenback, “Beam Emittance Measurement Tool for CEBAF Operations”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ03, pp. 25-27.
[n] J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
[n] D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
[n] H. Tamura et al., “Further Study on a New Type of a Tuning-Free Cavity with an All-Pass Network”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D016, pp. 420-422.
For LaTeX
Use Complete Form
For BibTeX
References
- V. A. Goryashko and V. G. Ziemann, “Longitudinal Coherence in an FEL With a Reduced Level of Shot Noise”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEOANO03, pp. 469-473.
- V. K. Grishin et al., “X-Ray Radiation by Relativistic Electrons in Condensed Media on Base of MSU Race-Track Microtron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAG12, pp. 105-106.
- S. Srivastava and V. S. Pandit, “A New Scheme for Direct Estimation of PID Controller Parameters”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD43, pp. 76-78.
- T. Planche, R. A. Baartman, I. V. Bylinskii, and Y.-N. Rao, “Space-charge Simulation of TRIUMF 500 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 254-257.
- A. Nicoletti and M. Martino, “Data-driven Controller Design Using the CERN Power Converter Control Libraries (CCLIBS)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1335-1337.
- Q. Chen and Q. Luo, “Conceptual design of collision feedback system for the Super Tau-Charm Facility”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 483-487.
- S. Redaelli et al., “Quench Tests at the Large Hadron Collider with Collimation Losses at 3.5 Z TeV”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP245, pp. 157-161.
- J. E. Griffin, J. A. MacLachlan, and A. Moretti, “Design of the rf Cavity and Power Ampifier for the Fermilab Antiproton Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3435-3438.
- C. Serrano, L. R. Doolittle, A. Ratti, and A. Vaccaro, “Ensemble Cavity Control System Simulation Using Pulse-to-pulse Calibration”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC150, pp. 1422-1424.
- M. J. Lee, “Steady-State Beam Loading of a Standing Wave Linac RF System”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper B-8, pp. 114-122.
- M. Klein et al., “Studies of Bunch Distortion and Bursting Threshold in the Generation of Coherent THz-Radiation at the ANKA Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP095, pp. 4761-4763.
- V. Palmieri, F. Stivanello, and M. Valentino, “Flux-Gate Magnetometry: The Possibility to Apply a Novel Tool to Monitor Niobium Chemistry”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP006, pp. 153-158.
- V. P. Yakovlev et al., “Concept EM Design of the 650 MHz Cavities for the Project X”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP089, pp. 994-996.
- M. H. Helle, D. F. Gordon, D. Kaganovich, and A. Ting, “Optical Diagnostic for Off-Axis Electrons in a Laser Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP066, pp. 2948-2948.
- Yu-Jiuan Chen, “Space-Charge Forces of a DC Beam in a Continuous Bend”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V042, pp. 1864-1866.
- A. Knyazik, E. Hemsing, A. Marinelli, and J. B. Rosenzweig, “Orbital Angular Momentum Light Generated via FEL at NLCTA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP164, pp. 2420-2422.
- R. L. Lillestol, S. Doebert, M. Olvegaard, and E. Adli, “Experimental Results from the Test Beam Line in the CLIC Test Facility 3”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA046, pp. 1814-1816.
- I. Issinsky, O. Kozlov, V. Mikhailov, P. Rukoyatkin, and B. Vasilishin, “Expected Characteristics of the Nuclotron Beams for Experimental Setups”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P010, pp. 181-183.
- C.-J. Jing et al., “Beam Test of a Tunable Dielectric Wakefield Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP117, pp. 316-318.
- P. Gudewicz and E. Petit, “Capacitive Beam Position Monitors and Automatic Beam Centering in the Transfer Lines of GANIL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1142-1145.
- J. Debnath, J. Pradhan, M. K. Dey, C. Mallik, and R. K. Bhandari, “”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP13005, pp. XX-XX.
- S. Eylon, E. Henestroza, M. Vella, S. S. Yu, and C. Ekdahl, “Electron Beam, 3.5MV, 2kA Injector Diode Diagnostics for the DARHT Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH126, pp. 2380-2382.
- W. Namkung et al., “Commissioning of PLS 2 GeV Electron Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 742-745.
- N. Sei, K. Yamada, H. Ogawa, M. Yasumoto, and T. Mikado, “Proposal of New Q-Switching Technique for Storage Ring Free Electron Lasers”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20004, pp. XX-XX.
- D. B. Cline, X. P. Ding, and J. L. Lederman, “Higgs Boson Muon Collider Factory: h0, A, H Studies”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC042, pp. 226-228.
- G. Hochweller, H. Frese, V. Heynen, and W. Krechlok, “PADAC Multi-Microcomputers Basic Building Blocks for Future Control Systems”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2380-2382.
- H. Eschelbacher and H. Schopper, “An Investigation of the Slotted Iris Structure with Drift Tubes”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-05, pp. 502-507.
- J.-H. Jang et al., “Beam Commissioning of KOMAC Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO066, pp. 3909-3911.
- S. V. Shchelkunov, J. L. Hirshfield, S. Kazakov, N. Solyak, V. P. Yakovlev, and V. E. Teryaev, “High-Power Low-Voltage Multi-Beam Klystrons for ILC and Project-X”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO19, pp. 978-980.
- P. Zhou and J. B. Rosenzweig, “Ion Clearing by Cyclotron Resonance Shaking”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1776-1779.
- S. Igarashi, Y. Kuniyasu, S. Nakamura, T. Oogoe, H. Someya, and S. Yamada, “Magnetic Field Ripple Reduction of Main Magnets of the J-PARC Main Ring using Trim Coils”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB011, pp. 301-303.
- N. Baboi et al., “Optimization of Beam Injection into the First Accelerating Module at TTF with Cavity Dipole Mode Signals”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM019, pp. XX-XX.
- D. La Civita, R. Bracco, B. Diviacco, G. Tomasin, and D. Zangrando, “FERMI@Elettra Undulator Frame Study”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC116, pp. 2276-2278.
- T. Khabiboulline et al., “Recent Results of Testing 3-cell 3.9 GHz Accelerating Cavity at Fermilab”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP14, pp. 267-267.
- G. Lambert et al., “Progress on the Generation of Undulator Radiation in the UV from a Plasma-based Electron Beam”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD47, pp. 638-641.
- S. A. Nikitin et al., “Record-high Resolution Experiments on Comparison of Spin Precession Frequencies of Electron Bunches Using the Resonant Depolarization Technique in the Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THOBFI03, pp. 2787-2789.
- Z. Zhang et al., “Preliminary design of continuous wave low-level RF systems for S3FEL”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 788-791.
- R. P. Nunes and F. B. Rizzato, “An Analytical Characterization of Initially Non-Homogeneous Matched Beams at Equilibrium”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP050, pp. 4421-4423.
- W. Buxton, R. Frankel, and J. W. Humphrey, “The ISABELLE Half-Cell Control System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1798-1801.
- R. I. Farnsworth, J. P. Hammonds, B. R. Pausma, C. M. Suarez, A. Rhyder, and A. C. Starritt, “Performance Testing of EPICS User Interfaces - an Attempt to Compare the Performance of MEDM, EDM, CSS-BOY, and EPICS”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB10, pp. 547-549.
- K. Ueshima et al., “Status of longitudinal instability suppression at NanoTerasu”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 362-366.
- J. L. Vallet, M. Vretenar, and M. Weiss, “Field Adjustment, Tuning and Beam Analysis of the High-Intensity CERN RFQ”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1234-1237.
- N.Kamikubota, K.Furukawa, S.Kusano, T.Obata, “Introduction of Modern Subsystems at the KEK Injector-Linac”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP025, pp. XX-XX.
- B. Dalena and D. Schulte, “Beam-beam Background in CLIC in Presence of Imperfections”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE025, pp. 3404-3406.
- P. Martel, Ch. Delamare, G. Godineau, and R. Nunes, “ADaMS 3: An Enhanced Access Control System for CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 401-404.
- T. Ohata, “Real-Time Control with VMEbus Multi-Master Configuration”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE617, pp. XX-XX.
- C. Benvenuti, S. Calatroni, I. E. Campisi, P. Darriulat, M. Peck, and R. Russo, “Study of the Role of the Interface Between Niobium Films and Copper RF Resonators”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D26, pp. 1050-1056.
- J. W. Staples et al., “Design of a VHF-band RF Photoinjector with MegaHertz Beam Repetition Rate”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN117, pp. 2990-2992.
- T. Lensch and M. Werner, “Machine Protection System for PETRA III”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD25, pp. 351-353.
- D. Dowell et al., “Analysis of Slice Emittance Measurements for the SLAC Gun Test Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB027, pp. 2104-2106.
- J. A. Crittenden, A. A. Mikhailichenko, E. N. Smith, K. W. Smolenski, and A. Temnykh, “Field Modelling for the CESR-c Superconducting Wiggler Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT034, pp. 2336-2338.
- J. O'Meara and M. Palmer, “Mechanical Design Features of the NAL 200 MeV Linac Injector”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper A-3, pp. 30-40.
- P. H. Williams et al., “A Recirculating Linac as a Candidate for the UK New Light Source Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP047, pp. 2376-2378.
- R. Laouar, E. R. Colby, R. J. England, and R. J. Noble, “Measurement of Thermal Dependencies of PBG Fiber Properties”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP276, pp. 1343-1345.
- A. Enomoto, “Bunching System of the KEKB Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP09, pp. 340-342.
- A. Intermite, M. Putignano, and C. P. Welsch, “Feasibility Study of an Optical Fibre Sensor for Beam Loss Detection Based on a SPAD Array”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB27, pp. 228-230.
- M. Tobiyama, “BPM Electrode and High Power Feedthrough - Special Topics in Wideband Feedthrough”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUTA02, pp. 297-301.
- V. P. Yakovlev, I. K. Drozdov, I. G. Gonin, N. Perunov, and N. Solyak, “Low-Beta Structure for High Energy Part of Project X”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP063, pp. 972-974.
- A. Citron, “Status Report on the Feasibility Study for a Superconducting Linear Accelerator for Protons”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-03, pp. 497-498.
- D. Van Winkle, V. A. Dolgashev, J. D. Fox, and S. G. Tantawi, “Investigations into Cost Reductions of X-band Instrumentation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP015, pp. 1559-1561.
- T. Tajima et al., “Evaluation and Testing of a Low-β Spoke Resonator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH057, pp. 903-905.
- Y. Yang, Y. B. Leng, and Y. B. Yan, “Time Measurement Method Based on CPLD for Beam Loss Position Monitor”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 98-100.
- V. Chouhan et al., “Transfer of EP and doping technology for PIP-II HB650 cavities from Fermilab to industry”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 685-688.
- M. Jenkins and I. R. Bailey, “Novel Designs for Undulator Based Positron Sources”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD036, pp. 1485-1487.
- D. Curry, J. Dedic, and D. H. Thompson, “Firmware Development for SNS New Timing Master”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP087, pp. 4162-4164.
- F. Hug, M. Arnold, T. Bahlo, J. Pforr, and N. Pietralla, “Beam Based Alignment of SRF Cavities in an Electron Injector Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4219-4222.
- F. Zimmermann, G. Yocky, D. Whittum, D. McCormick, and S. Horton-Smith, “A Beam-Timing Monitor for the SLC Final Focus”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D035, pp. 477-479.
- R. Hardekopf et al., “Fabrication of MEBT Chopper for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB018, pp. 1661-1663.
- J. W. Ok et al., “A Diagnostics of Ion Beam from 28 GHz Electron Cyclotron Resonance Ion Source”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF12, pp. 561-564.
- Y. C. Nie et al., “Design of a 104-MHz Trapezoidal IH-RFQ”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP079, pp. 4962-4964.
- P. J. Tallerico, “A 150-kW, 450-MHz Gyrocon RF Generator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3420-3423.
- R. S. Moore, “Review of Recent Tevatron Operations”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOCKI01, pp. 719-721.
- B. Copy, “Service Oriented Status Monitoring for DIP Middleware”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper FRA003, pp. 928-930.
- T. Adachi, T. Kawakubo, M. Kihara, C. Ohmori, and I. Yamane, “Beam-Profile Measurement in the KEK-PS Booster Using Pulsed bum Magnets and a Movable Scraper”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1655-1658.
- B. Dalena, D. Boutin, A. Chanc?®, E. Cruz Alaniz, and D. Schulte, “Field Quality for the Hadron Option of Future Circular Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4397-4400.
- L. Pivetta, A. I. Bogani, and R. Passuello, “Flop: Customizing Yocto Project for MVMExxxx PowerPC and BeagleBone ARM”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 958-961.
- M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
- C. J. Bocchetta et al., “Ion Trapping Investigations in ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1153-1156.
- C. Rossi et al., “Assembly and RF Tuning of the Linac4 RFQ at CERN”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB038, pp. 939-941.
- R. Nagaoka, “Coupling and Dispersion Correction in ELETTRA”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP083L, pp. 980-982.
- V. Balandin, W. Decking, and N. Golubeva, “Unclosed Lattice Dispersions as a Tool for Partial Removal of Transverse to Longitudinal Beam Correlations”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3229-3232.
- E. Veyrunes, A. Asko, G. Trad, and J. Wenninger, “Interlock Super Agent : Enhancing Machine Efficiency and Performance at CERN’s Super Proton Synchrotron”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP103, pp. 799-801.
- Shigeru. Takeda, K. Oide, and Masakazu. Yoshioka. Kikuo. Kudo, “Ground Motion Issue on the Large Accelerator Alignment”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D072, pp. 266-270.
- M. J. P. Adam and C. Bodnarchuk, “Combined Fixed Mask, Photon Shutter, Safety Shutter, and Collimator Design for BXDS IVU at the CLS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 309-311.
- R. G. Farber, S. J. Sibener, S. A. Willson, R. G. Hennig, and A. C. Hire, “Visualization of Sn Adsorption Behavior and Thermally Driven Diffusion Pathways on (3?ù1)-O Nb(100)”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFDV007, pp..
- C. J. Bocchetta, S. Tazzari, and R. P. Walker, “Status and Development of ELETTRA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B16, pp. 714-716.
- J. Seeman, M. E. Biagini, Y. Cai, P. Raimondi, M. K. Sullivan, and U. Wienands, “Super-B Factory using Low Emittance Storage Rings and Large Crossing Angle”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN034, pp. 1460-1462.
- H. Jang, J.-H. Jang, and H. Jin, “Start-to-End Simulation for RAON Superconducting Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 311-313.
- M. A. Fraser et al., “Slow Extraction Efficiency Measurements at the CERN SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 834-837.
- A. C. Garcia-Bonilla and J. F. Cardona, “Comparison between Digital Filters and Singular Value Decomposition to Reduce Noise in LHC Orbits used for Action and Phase Jump Analysis”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 83-85.
- P. Chevtsov and M. G. Tiefenback, “Beam Emittance Measurement Tool for CEBAF Operations”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOZ03, pp. 25-27.
- J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
- D. Fernandez-Carreiras et al., “Alba, the PLC Based Protection Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEC003, pp. 397-399.
- H. Tamura et al., “Further Study on a New Type of a Tuning-Free Cavity with an All-Pass Network”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D016, pp. 420-422.
Back to search