Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hasebe et al., “History of Solid Disk Improvement for Rotating Charge Stripper”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA1C01, pp. 17-19.
[n] Y. Luo et al., “Dynamic Aperture Evaluation for the RHIC 2009 Polarized Proton Runs”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP007, pp. 2492-2494.
[n] N. Fuster-Martinez et al., “Design and Feasibility Study of a Transverse Halo Collimation System for ATF2”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 145-147. doi:10.18429/JACoW-IPAC2014-MOPRO033
[n] J. H. B. Madsen et al., “The CERN Linear Collider Test Facility (CTF)”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-13, pp. 329-331.
[n] S. Ackermann et al., “Seeding studies at FLASH”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL026, unpublished.
[n] R. Kwee-Hinzmann et al., “First Beam Background Simulation Studies at IR1 for High Luminosity LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1074-1077. doi:10.18429/JACoW-IPAC2014-TUPRO027
[n] J. W. Osterlund and R. Smythe, “A Cyclotron Power-Amplifier RF System Using a 4 CW 50,000C/8350 Tetrode”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 174-180.
[n] M. A. Plum et al., “SNS Proton Power Upgrade Status”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2124-2126. doi:10.18429/JACoW-IPAC2019-TUPTS086
[n] W. Singer et al., “Development of Large Grain Superconducting Resonators for the European XFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP054, pp. 947-949.
[n] A. Burril and M. Poelker, “ERL07 Working Group 1 Summary: Electron Guns and Injector Designs”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 1, pp. 139-144.
[n] C. Mitsuda et al., “Injection Section Upgrading with the Septum-Magnet Replacement in KEK-PF Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 342-345. doi:10.18429/JACoW-IPAC2021-MOPAB091
[n] C. P. Welsch, “DITANET - An International Network in Beam Diagnostics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA060, pp. 813-815.
[n] G. M. Wang, M. A. Davidsaver, A. A. Derbenev, R. P. Fliller, Y. Hu, and T. V. Shaftan, “Top-off Tests and Controls Optimization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2982-2984. doi:10.18429/JACoW-IPAC2016-WEPOW058
[n] A. Sargsyan and K. Manukyan, “A Method of Beam Energy Spread and Synchrotron Tune Mesurment Based on Decoherence Signal Analysis”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE056, pp. 4647-4649.
[n] J. Li et al., “Design of the SRing Electron Target”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper P1006, pp. 78-80.
[n] V. V. Parkhomchuk et al., “Status of the 2.5 MeV Electron Cooling System for NICA Collider”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 35-38. doi:10.18429/JACoW-RUPAC2018-TUCBMH02
[n] L. G. Foggetta, B. Buonomo, and P. Valente, “Beam Optimization of the DANE Beam Test Facility”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 901-903. doi:10.18429/JACoW-IPAC2015-MOPHA048
[n] A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
[n] K. Yamada et al., “Construction of Superconducting Linac Booster for Heavy-Ion Linac at RIKEN Nishina Center”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 502-507. doi:10.18429/JACoW-SRF2019-TUP037
[n] S. Seletskiy et al., “Absolute Energy Measurement of the LEReC Electron Beam”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1033-1035. doi:10.18429/JACoW-NAPAC2016-WEPOB62
[n] A. G. Golovkina, I. V. Kudinovich, D. A. Ovsyannikov, and Y. A. Svistunov, “The Problems of Accelerator-Driver Design for ADS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 486-489. doi:10.18429/JACoW-RUPAC2016-WEPSB055
[n] C. C. Hall, D. L. Bruhwiler, J. P. Edelen, N. Kuklev, A. L. Romanov, and A. Valishev, “First Measurements of Nonlinear Decoherence in the IOTA Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3286-3288. doi:10.18429/JACoW-IPAC2019-WEPTS070
[n] L. R. Prost et al., “Status of the PXIE Low Energy Beam Transport Line”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 812-814. doi:10.18429/JACoW-IPAC2014-MOPRI086
[n] J. Wei, I. Hofmann, E. N. Shaposhnikova, and F. Zimmermann, “Summary of General Working Group A+B+D with a Focus on Code Benchmarking”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper FRAP08, pp. 379-382.
[n] I. Sakai, T. Kawakubo, and M. Suetake, “A New System to Trigger Fast Rise Thyristors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 2005-2008.
[n] A. Gaget et al., “Machine Protection System at SARAF”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1573-1577. doi:10.18429/JACoW-ICALEPCS2023-THPDP102
[n] F. S. Reinath and D. T. Scalise, “Design Concepts of Modern Accelerator Vacuum Systems - Prediction vs. Experimental Data”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 734-740.
[n] C. Kim, “Present Status of PLS-II and PAL-XFEL”, presented at the IBIC'21, Pohang, Korea, Sep. 2021, paper MOOA01, unpublished.
[n] D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60.
[n] M. Comunian et al., “The Project SPES at Legnaro National Laboratories”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUA2C02, pp. 156-159.
[n] M. A. Audi, “Ion Pumps for UHV Systems, Cyclotrons Synchrotrons & Particle Accelerators”, presented at the Cyclotrons'22, Beijing, China, Dec. 2022, paper MOAO03, unpublished.
[n] R. Tom?ís, M. Aiba, A. Nadji, L. S. Nadolski, M.-A. Tordeux, and G. Vanbavinckhove, “Linear and Non-Linear Optics Measurements at SOLEIL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP075, pp. 3877-3879.
[n] A. Palmieri, L. Bellan, M. Comunian, L. Ferrari, A. Pisent, and C. R. Roncolato, “A Novel CW RFQ for Exotic and Stable Beams”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 156-161. doi:10.18429/JACoW-HIAT2022-TH3I1
[n] I. Petrushina, V. Litvinenko, G. Narayan, I. Pinayev, F. Severino, and K. S. Smith, “Multipacting Behavior Study for the 112 MHz Superconducting Photo-Electron Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1180-1183. doi:10.18429/JACoW-IPAC2017-MOPVA140
[n] R. E. Laxdal, “Design of a Drift Tube Linac for the ISAC Project at TRIUMF”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP43, pp. 435-437.
[n] S. E. Kopp, “The Numi Neutrino Beam At Fermilab”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FOAC004, unpublished.
[n] E. Baron et al., “Preliminary Design of a New High Intensity Injection System for GANIL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-12, pp. 372-375.
[n] V. S. Aleksandrov, G. G. Gulbekian, N. Yu. Kazarinov, and A. V. Tikhomirov, “Numerical Simulation of the 48Ca5+ Ions Transport Along the U-400 Cyclotron's Injection Line”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-02, pp. XX-XX.
[n] P. Bambade et al., “Fast Luminosity Monitoring for the SuperKEKB Collider (LumiBelle2 Project)”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 173. doi:10.18429/JACoW-eeFACT2018-TUPBB06
[n] J. M. Schippers, “The Beam-Guiding System of AGOR”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XD-04, pp. 615-617.
[n] G. Rodrigues, D. Kanjilal, P. Kumar, P. S. Lakshmy, and A. Mandal, “Operational Experience with the HTS-ECRIS, PKDELIS”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-17, pp. 107-110.
[n] M. Yakopov, S. Abeghyan, S. Karabekyan, and J. Pflueger, “Installation and the Hardware Commissioning of the European XFEL Undulator Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1344-1347. doi:10.18429/JACoW-ICALEPCS2017-THPHA003
[n] L. Smith, “Linac Focusing”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper C-06, pp. 274-282.
[n] K. W. Shepard, “Development of a Heavy-Ion Linac Based on Superconducting Interdigital Accelerating Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-11, pp. 269-271.
[n] B. Dalena et al., “Dipole Field Quality and Dynamic Aperture for FCC-hh”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 137-140. doi:10.18429/JACoW-IPAC2018-MOPMF024
[n] M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 194-197. doi:10.18429/JACoW-MEDSI2016-TUPE15
[n] M. E. Biagini et al., “DANE Phi-Factory Upgrade for Siddharta Run”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBKI02, pp. 66-68.
[n] M. Pabst, “Halo Simulation in a realistic proton Linac design”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MO203, pp. 27-31.
[n] N. A. Huque, E. Daly, B. D. Hartsell, J. P. Holzbauer, and P. D. Owen, “Improvements to LCLS-II Cryomodule Transportation”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 684-689. doi:10.18429/JACoW-SRF2019-TUP094
[n] E. A. Nanni et al., “Toward High-Power High-Gradient Testing of mm-Wave Standing-Wave Accelerating Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1224-1227. doi:10.18429/JACoW-IPAC2018-TUZGBE4
[n] G. V. Claudiano, P. T. Fonseca, L. M. Volpe, E. B. Fonseca, and M. H. S. Silva, “Friction Stir Welding and Copper-Chromium Zirconium: a New Concept for the Design of Sirius' High-Power Absorbers”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 39-42. doi:10.18429/JACoW-MEDSI2018-TUPH09
[n] M. P. Kelly, Z. A. Conway, M. Kedzie, S. V. Kutsaev, J. L. Crisp, and L. L. Harle, “Compact 4 kW Variable RF Power Coupler for FRIB Quarter-wave Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB093, pp. 678-680.
[n] D. Trbojevic and R. Gerig, “Design and Commissioning of the D0 Vertical Nondispersive Overpass in the Fermilab Main Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1831-1834.
[n] N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446.
[n] Z. Huang, C. Li, G. Liu, Y. Song, and K. Wan, “A Redundant EPICS Control System Based on PROFINET”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 736-738. doi:10.18429/JACoW-ICALEPCS2015-WEPGF020
[n] Y. Zhang and Y. M. Peng, “A High Energy e-p/A Collider Based on CepC-SppC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2329-2332. doi:10.18429/JACoW-IPAC2015-TUPWI038
[n] W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 258-262. doi:10.18429/JACoW-Cyclotrons2016-WEB01
[n] S. Pei, T. O. Raubenheimer, A. Seryi, and J. C. Smith, “Simulation of Wakefield Effect in ILC IR Chamber”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP097, pp. 2743-2745.
[n] C. Antuono, M. Migliorati, A. Mostacci, E. Métral, and C. Zannini, “A Wireless Method to Obtain the Impedance From Scattering Parameters”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2213-2216. doi:10.18429/JACoW-IPAC2022-WEPOTK063
[n] E. Sombrowski, O. Hensler, R. Kammering, K. Rehlich, and A. Petrosyan, “First Experiences with a Central Error Server Using Web Services”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper FR112, pp. XX-XX.
[n] G. Wu, “Results from ANL/FNAL and Weld Zone Quenching”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOBAU03, pp. 491-494.
[n] Y. Mori, “Experience and Perspective of FFAG Accelerator”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 342-346. doi:10.18429/JACoW-HB2018-THA1WD01
[n] R. A. Kishek et al., “Advances in Modeling the University of Maryland Electron Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP050, pp. 1585-1587.
[n] E. Acerbi, R. Bonifacio, R. Corsini, L. De Salvo Souza, and L. Rossi, “The Composite Wiggler for the ELFA Project”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1368-1371.
[n] N. S. Sudar, J. P. Duris, and P. Musumeci, “IFEL Driven Micro-Electro-Mechanical System Free Electron Laser”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP045, pp. 481-484.
[n] M. A. Palmer et al., “CESR Beam Position Monitor System Upgrade for CesrTA and CHESS Operations”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE089, pp. 1191-1193.
[n] M. Giovannozzi, R. De Maria, and S. D. Fartoukh, “Specification of a System of Correctors for the Triplets and Separation Dipoles of the LHC Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA048, pp. 2612-2614.
[n] D. K. Olsen et al., “The ORNL Radioactive Ion Beam Project with the ORIC Accelerator”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XIII-07, pp. 741-744.
[n] A. Miyazaki et al., “France-Japan collaboration for high-Q / high-G SRF cavities”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 67-70. doi:10.18429/JACoW-SRF2025-MOP10
[n] R. Geithner et al., “A SQUID-based Beam Current Monitor for FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3524-3526. doi:10.18429/JACoW-IPAC2014-THPME122
[n] C. Y. Yang, J.-R. Chen, G.-Y. Hsiung, and Z.-D. Tsai, “Design of the Vacuum Interlock System for the TPS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA087, pp. 3873-3875.
[n] C. Yao, L. Emery, M. Borland, and A. Xiao, “Beam Loss Issues for an ERL Upgrade to APS”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 29, pp. 53-55.
[n] M. A. Nozdrin, N. Balalykin, V. Minashkin, V. Y. Schegolev, G. Shirkov, and G. V. Trubnikov, “Progress of the JINR e-Linac Accelerator Test-Bench Control Systems”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD32, pp. 203-205.
[n] Q. A. Kerns and W. S. Flood, “Stabilization of Accelerating Voltage Under High-Intensity Beam Loading”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 58-65.
[n] M. M. Maggiore et al., “SCENT300, A Superconducting Cyclotron For Hadrontherapy”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP123, pp. 1812-1814.
[n] H. A. Silva and G. B. M. Bruno, “openMMC: An Open Source Modular Firmware for Board Management”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 94-96. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO04
[n] S. Fujishima et al., “Design Study of the Injection System of the RIKEN Superconducting Ring Cyclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP030G, pp. 2397-2399.
[n] V. M. Panasyuk, M. I. Bryzgunov, A. V. Bubley, V. V. Parkhomchuk, and V. B. Reva, “Matching of Magnetic Field with Energy of Electrons in 2 MeV COSY Cooler”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO07, pp. 110-112.
[n] D. Luo et al., “Solenoid/Magnetic Shielding Test Results in FRIB-1&2 Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 607-609. doi:10.18429/JACoW-LINAC2016-TUPLR067
[n] Y. Chai, P. Li, C. Wang, and T. Zhang, “Design of a dual extraction system for the ultra-compact multifunctional cyclotron CYCIAE-36A”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4633, unpublished.
[n] F. J. Galindo Guarch, M. M. A. Moreno Arostegui, and P. Baudrenghien, “Compensation of Transient Beam Loading in Ramping Synchrotrons Using a Fixed Frequency Processing Clock”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4957-4960. doi:10.18429/JACoW-IPAC2018-THPML121
[n] T. W. Koeth et al., “Experience with Capture Cavity II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN094, pp. 2251-2253.
[n] V. L. Uvarov et al., “Beam-power Calibration System for Industrial Electron Accelerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT141, pp. 2167-2169.
[n] P. Hopchev et al., “A Beam Gas Vertex Detector for Beam Size Measurement in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3680-3683. doi:10.18429/JACoW-IPAC2014-THPME175
[n] M. G. Billing et al., “Techniques for Observation of Beam Dynamics in the Presence of an Electron Cloud”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE091, pp. 1197-1199.
[n] S. A. Gavrilov et al., “Proton Irradiation Facility at INR RAS Linac”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 142-144. doi:10.18429/JACoW-RUPAC2018-FRCAMH02
[n] N. Simos, M. Fallier, and T. F. Joos, “Numerical Treatment of Moving Loads Affecting the Stability of NSLS II Light Source Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP014, pp. 1120-1122.
[n] K. Okabe, Y. Ishi, Y. Mori, and T. Uesugi, “Study of FFAG-ERIT Neutron Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB064, pp. 418-420.
[n] V. Chouhan et al., “Latest Development of Electropolishing Optimization for 650 MHz Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 512-516. doi:10.18429/JACoW-SRF2023-TUPTB042
[n] G. K. Green, “Accelerator Power Systems”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1109-1112.
[n] J. A. Carter, “3D Numerical Ray Tracing for the APS-Upgrade Storage Ring Vacuum System Design”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 312-315. doi:10.18429/JACoW-MEDSI2018-THOAMA05
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hasebe et al., “History of Solid Disk Improvement for Rotating Charge Stripper”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA1C01, pp. 17-19.
- Y. Luo et al., “Dynamic Aperture Evaluation for the RHIC 2009 Polarized Proton Runs”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP007, pp. 2492-2494.
- N. Fuster-Martinez et al., “Design and Feasibility Study of a Transverse Halo Collimation System for ATF2”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 145-147.
- J. H. B. Madsen et al., “The CERN Linear Collider Test Facility (CTF)”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-13, pp. 329-331.
- S. Ackermann et al., “Seeding studies at FLASH”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL026, unpublished.
- R. Kwee-Hinzmann et al., “First Beam Background Simulation Studies at IR1 for High Luminosity LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1074-1077.
- J. W. Osterlund and R. Smythe, “A Cyclotron Power-Amplifier RF System Using a 4 CW 50,000C/8350 Tetrode”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 174-180.
- M. A. Plum et al., “SNS Proton Power Upgrade Status”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2124-2126.
- W. Singer et al., “Development of Large Grain Superconducting Resonators for the European XFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP054, pp. 947-949.
- A. Burril and M. Poelker, “ERL07 Working Group 1 Summary: Electron Guns and Injector Designs”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 1, pp. 139-144.
- C. Mitsuda et al., “Injection Section Upgrading with the Septum-Magnet Replacement in KEK-PF Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 342-345.
- C. P. Welsch, “DITANET - An International Network in Beam Diagnostics”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA060, pp. 813-815.
- G. M. Wang, M. A. Davidsaver, A. A. Derbenev, R. P. Fliller, Y. Hu, and T. V. Shaftan, “Top-off Tests and Controls Optimization”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2982-2984.
- A. Sargsyan and K. Manukyan, “A Method of Beam Energy Spread and Synchrotron Tune Mesurment Based on Decoherence Signal Analysis”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE056, pp. 4647-4649.
- J. Li et al., “Design of the SRing Electron Target”, in Proc. 13th Workshop on Beam Cooling and Related Topics (COOL'21), Novosibirsk, Russia, Nov. 2021, paper P1006, pp. 78-80.
- V. V. Parkhomchuk et al., “Status of the 2.5 MeV Electron Cooling System for NICA Collider”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 35-38.
- L. G. Foggetta, B. Buonomo, and P. Valente, “Beam Optimization of the DANE Beam Test Facility”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 901-903.
- A. Peters et al., “Operational Status and Further Enhancements of the HIT Accelerator Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA006, pp. 73-75.
- K. Yamada et al., “Construction of Superconducting Linac Booster for Heavy-Ion Linac at RIKEN Nishina Center”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 502-507.
- S. Seletskiy et al., “Absolute Energy Measurement of the LEReC Electron Beam”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1033-1035.
- A. G. Golovkina, I. V. Kudinovich, D. A. Ovsyannikov, and Y. A. Svistunov, “The Problems of Accelerator-Driver Design for ADS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 486-489.
- C. C. Hall, D. L. Bruhwiler, J. P. Edelen, N. Kuklev, A. L. Romanov, and A. Valishev, “First Measurements of Nonlinear Decoherence in the IOTA Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3286-3288.
- L. R. Prost et al., “Status of the PXIE Low Energy Beam Transport Line”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 812-814.
- J. Wei, I. Hofmann, E. N. Shaposhnikova, and F. Zimmermann, “Summary of General Working Group A+B+D with a Focus on Code Benchmarking”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper FRAP08, pp. 379-382.
- I. Sakai, T. Kawakubo, and M. Suetake, “A New System to Trigger Fast Rise Thyristors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 2005-2008.
- A. Gaget et al., “Machine Protection System at SARAF”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP102, pp. 1573-1577.
- F. S. Reinath and D. T. Scalise, “Design Concepts of Modern Accelerator Vacuum Systems - Prediction vs. Experimental Data”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 734-740.
- C. Kim, “Present Status of PLS-II and PAL-XFEL”, presented at the 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, paper MOOA01, unpublished.
- D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60.
- M. Comunian et al., “The Project SPES at Legnaro National Laboratories”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper TUA2C02, pp. 156-159.
- M. A. Audi, “Ion Pumps for UHV Systems, Cyclotrons Synchrotrons & Particle Accelerators”, presented at the 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOAO03, unpublished.
- R. Tom?ís, M. Aiba, A. Nadji, L. S. Nadolski, M.-A. Tordeux, and G. Vanbavinckhove, “Linear and Non-Linear Optics Measurements at SOLEIL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP075, pp. 3877-3879.
- A. Palmieri, L. Bellan, M. Comunian, L. Ferrari, A. Pisent, and C. R. Roncolato, “A Novel CW RFQ for Exotic and Stable Beams”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 156-161.
- I. Petrushina, V. Litvinenko, G. Narayan, I. Pinayev, F. Severino, and K. S. Smith, “Multipacting Behavior Study for the 112 MHz Superconducting Photo-Electron Gun”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1180-1183.
- R. E. Laxdal, “Design of a Drift Tube Linac for the ISAC Project at TRIUMF”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP43, pp. 435-437.
- S. E. Kopp, “The Numi Neutrino Beam At Fermilab”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAC004, unpublished.
- E. Baron et al., “Preliminary Design of a New High Intensity Injection System for GANIL”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-12, pp. 372-375.
- V. S. Aleksandrov, G. G. Gulbekian, N. Yu. Kazarinov, and A. V. Tikhomirov, “Numerical Simulation of the 48Ca5+ Ions Transport Along the U-400 Cyclotron's Injection Line”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-02, pp. XX-XX.
- P. Bambade et al., “Fast Luminosity Monitoring for the SuperKEKB Collider (LumiBelle2 Project)”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 173.
- J. M. Schippers, “The Beam-Guiding System of AGOR”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XD-04, pp. 615-617.
- G. Rodrigues, D. Kanjilal, P. Kumar, P. S. Lakshmy, and A. Mandal, “Operational Experience with the HTS-ECRIS, PKDELIS”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-17, pp. 107-110.
- M. Yakopov, S. Abeghyan, S. Karabekyan, and J. Pflueger, “Installation and the Hardware Commissioning of the European XFEL Undulator Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1344-1347.
- L. Smith, “Linac Focusing”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper C-06, pp. 274-282.
- K. W. Shepard, “Development of a Heavy-Ion Linac Based on Superconducting Interdigital Accelerating Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-11, pp. 269-271.
- B. Dalena et al., “Dipole Field Quality and Dynamic Aperture for FCC-hh”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 137-140.
- M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 194-197.
- M. E. Biagini et al., “DANE Phi-Factory Upgrade for Siddharta Run”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOOBKI02, pp. 66-68.
- M. Pabst, “Halo Simulation in a realistic proton Linac design”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MO203, pp. 27-31.
- N. A. Huque, E. Daly, B. D. Hartsell, J. P. Holzbauer, and P. D. Owen, “Improvements to LCLS-II Cryomodule Transportation”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 684-689.
- E. A. Nanni et al., “Toward High-Power High-Gradient Testing of mm-Wave Standing-Wave Accelerating Structures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1224-1227.
- G. V. Claudiano, P. T. Fonseca, L. M. Volpe, E. B. Fonseca, and M. H. S. Silva, “Friction Stir Welding and Copper-Chromium Zirconium: a New Concept for the Design of Sirius' High-Power Absorbers”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 39-42.
- M. P. Kelly, Z. A. Conway, M. Kedzie, S. V. Kutsaev, J. L. Crisp, and L. L. Harle, “Compact 4 kW Variable RF Power Coupler for FRIB Quarter-wave Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB093, pp. 678-680.
- D. Trbojevic and R. Gerig, “Design and Commissioning of the D0 Vertical Nondispersive Overpass in the Fermilab Main Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1831-1834.
- N. Steinhau-K??hl et al., “Electro Polishing at DESY”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP46, pp. 442-446.
- Z. Huang, C. Li, G. Liu, Y. Song, and K. Wan, “A Redundant EPICS Control System Based on PROFINET”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 736-738.
- Y. Zhang and Y. M. Peng, “A High Energy e-p/A Collider Based on CepC-SppC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2329-2332.
- W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 258-262.
- S. Pei, T. O. Raubenheimer, A. Seryi, and J. C. Smith, “Simulation of Wakefield Effect in ILC IR Chamber”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP097, pp. 2743-2745.
- C. Antuono, M. Migliorati, A. Mostacci, E. Métral, and C. Zannini, “A Wireless Method to Obtain the Impedance From Scattering Parameters”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2213-2216.
- E. Sombrowski, O. Hensler, R. Kammering, K. Rehlich, and A. Petrosyan, “First Experiences with a Central Error Server Using Web Services”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper FR112, pp. XX-XX.
- G. Wu, “Results from ANL/FNAL and Weld Zone Quenching”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THOBAU03, pp. 491-494.
- Y. Mori, “Experience and Perspective of FFAG Accelerator”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 342-346.
- R. A. Kishek et al., “Advances in Modeling the University of Maryland Electron Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP050, pp. 1585-1587.
- E. Acerbi, R. Bonifacio, R. Corsini, L. De Salvo Souza, and L. Rossi, “The Composite Wiggler for the ELFA Project”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1368-1371.
- N. S. Sudar, J. P. Duris, and P. Musumeci, “IFEL Driven Micro-Electro-Mechanical System Free Electron Laser”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP045, pp. 481-484.
- M. A. Palmer et al., “CESR Beam Position Monitor System Upgrade for CesrTA and CHESS Operations”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE089, pp. 1191-1193.
- M. Giovannozzi, R. De Maria, and S. D. Fartoukh, “Specification of a System of Correctors for the Triplets and Separation Dipoles of the LHC Upgrade”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA048, pp. 2612-2614.
- D. K. Olsen et al., “The ORNL Radioactive Ion Beam Project with the ORIC Accelerator”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XIII-07, pp. 741-744.
- A. Miyazaki et al., “France-Japan collaboration for high-Q / high-G SRF cavities”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 67-70.
- R. Geithner et al., “A SQUID-based Beam Current Monitor for FAIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3524-3526.
- C. Y. Yang, J.-R. Chen, G.-Y. Hsiung, and Z.-D. Tsai, “Design of the Vacuum Interlock System for the TPS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA087, pp. 3873-3875.
- C. Yao, L. Emery, M. Borland, and A. Xiao, “Beam Loss Issues for an ERL Upgrade to APS”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 29, pp. 53-55.
- M. A. Nozdrin, N. Balalykin, V. Minashkin, V. Y. Schegolev, G. Shirkov, and G. V. Trubnikov, “Progress of the JINR e-Linac Accelerator Test-Bench Control Systems”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD32, pp. 203-205.
- Q. A. Kerns and W. S. Flood, “Stabilization of Accelerating Voltage Under High-Intensity Beam Loading”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 58-65.
- M. M. Maggiore et al., “SCENT300, A Superconducting Cyclotron For Hadrontherapy”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP123, pp. 1812-1814.
- H. A. Silva and G. B. M. Bruno, “openMMC: An Open Source Modular Firmware for Board Management”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 94-96.
- S. Fujishima et al., “Design Study of the Injection System of the RIKEN Superconducting Ring Cyclotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP030G, pp. 2397-2399.
- V. M. Panasyuk, M. I. Bryzgunov, A. V. Bubley, V. V. Parkhomchuk, and V. B. Reva, “Matching of Magnetic Field with Energy of Electrons in 2 MeV COSY Cooler”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO07, pp. 110-112.
- D. Luo et al., “Solenoid/Magnetic Shielding Test Results in FRIB-1&2 Cryomodules”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 607-609.
- Y. Chai, P. Li, C. Wang, and T. Zhang, “Design of a dual extraction system for the ultra-compact multifunctional cyclotron CYCIAE-36A”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4633, this conference.
- F. J. Galindo Guarch, M. M. A. Moreno Arostegui, and P. Baudrenghien, “Compensation of Transient Beam Loading in Ramping Synchrotrons Using a Fixed Frequency Processing Clock”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4957-4960.
- T. W. Koeth et al., “Experience with Capture Cavity II”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN094, pp. 2251-2253.
- V. L. Uvarov et al., “Beam-power Calibration System for Industrial Electron Accelerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT141, pp. 2167-2169.
- P. Hopchev et al., “A Beam Gas Vertex Detector for Beam Size Measurement in the LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3680-3683.
- M. G. Billing et al., “Techniques for Observation of Beam Dynamics in the Presence of an Electron Cloud”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE091, pp. 1197-1199.
- S. A. Gavrilov et al., “Proton Irradiation Facility at INR RAS Linac”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 142-144.
- N. Simos, M. Fallier, and T. F. Joos, “Numerical Treatment of Moving Loads Affecting the Stability of NSLS II Light Source Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP014, pp. 1120-1122.
- K. Okabe, Y. Ishi, Y. Mori, and T. Uesugi, “Study of FFAG-ERIT Neutron Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB064, pp. 418-420.
- V. Chouhan et al., “Latest Development of Electropolishing Optimization for 650 MHz Cavity”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB042, pp. 512-516.
- G. K. Green, “Accelerator Power Systems”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1109-1112.
- J. A. Carter, “3D Numerical Ray Tracing for the APS-Upgrade Storage Ring Vacuum System Design”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 312-315.
Back to search