Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Gusarova, I. I. Petrushina, E. A. Savin, A. N. Stolbikova, and V. Zvyagintsev, “Multipacting Prediction for the 106.1 MHz Quarter Wave Resonator”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP110, pp. 313-316.
[n] K. Kittimanapun, Ch. Dhammatong, N. Juntong, W. Phacheerak, and M. Phanak, “Development of a Pre-Injector Test Bench for Future SLRI Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4499-4501. doi:10.18429/JACoW-IPAC2018-THPMK085
[n] X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 911-913. doi:10.18429/JACoW-IPAC2017-MOPVA026
[n] M. A. Uchida, “The Alignment of the MICE Tracker Detectors”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2597-2600. doi:10.18429/JACoW-IPAC2015-WEPWA044
[n] Y. Hwang, T. Tajima, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and R. A. Marsh, “LLNL Laser-Compton X-ray Characterization”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1885-1888. doi:10.18429/JACoW-IPAC2016-TUPOW052
[n] M. Walter et al., “Time Resolved Emittance Measurement in the University of Maryland Electron Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB074, pp. 2574-2576.
[n] A. S. Plastun et al., “RF Design of the Nuclotron-NICA 145.2 MHz RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 595-597. doi:10.18429/JACoW-LINAC2016-TUPLR060
[n] F. J. C. Wenander, V. Bencini, N. Bidault, G. Khatri, H. Pahl, and A. I. Pikin, “Latest EBIS Development Activities at CERN”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH1WH01, unpublished.
[n] A. Scheinker, “Adaptive Accelerator Tuning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1237-1239. doi:10.18429/JACoW-IPAC2015-MOPWI034
[n] F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1356-1358. doi:10.18429/JACoW-IPAC2019-TUPMP047
[n] J.-C. Chang et al., “Status of the Utility System Construction for the 3 GeV TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD039, pp. 2597-2599.
[n] R. Yadav, A. Penirschke, S. Preu, and S. Regensburger, “Optimization of GaAs Based Field Effect Transistors for THz Detection at Particle Accelerators”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper WEPP23, unpublished.
[n] G. X. Xia, A. Caldwell, C. Huang, and W. B. Mori, “Simulation Study of Proton-Driven PWFA Based on CERN SPS Beam”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP108, pp. 301-303.
[n] N. R. Neveu, S. T, P. Hudson, J. M. Larson, and L. K. Spentzouris, “Comparison of Model-Based and Heuristic Optimization Algorithms Applied to Photoinjectors Using Libensemble”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 22-24. doi:10.18429/JACoW-ICAP2018-SAPAF03
[n] W. Shields, A. Finn, P. Karataev, R. Bartolini, I. P. S. Martin, and G. Rehm, “Longitudinal Beam Profile Measurements of the Microbunching Instability”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3706-3708. doi:10.18429/JACoW-IPAC2014-THPME183
[n] M. P. Kelly, J. Delayen, J. D. Fuerst, M. Kedzie, S. I. Sharamentov, and K. W. Shepard, “Microphonics Measurements in SRF Cavities for RIA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB043, pp. 1291-1293.
[n] T.-C. Yu et al., “Petra Cavity Vacuum RF Condition with Field Balance Mechanism for TPS Storage Ring in NSRRC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI061, pp. 2833-2835.
[n] R. T. P. D, S. Jolly, J. K. Jones, B. D. Muratori, and S. B. van der Geer, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC079, pp. 319-321.
[n] W. Koprek et al., “Intra-train Longitudinal Feedback for Beam Stabilization at FLASH”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOAI2, pp. 537-543.
[n] D. K. Kalantaryan, G. A. Amatuni, P. Beaud, G. Ingold, A. Streun, and V. M. Tsakanov, “Laser -- Beam Interaction and Calculation of the Sliced Bunch Radiation Spectra for the SLS FEMTO Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC026, pp. 2040-2042.
[n] M. Fishman and D. Reagan, “The SLAC Long Ion Chamber System for Machine Protection”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1096-1099.
[n] A. V. Fedotov et al., “Bunched Beam Electron Cooler for Low-energy RHIC Operation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOAA1, pp. 363-365.
[n] S. Aderhold et al., “3.9 GHz SRF Production Cavities for LCLS-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 173-176. doi:10.18429/JACoW-SRF2019-MOP051
[n] M. Kumada, H. Ogawa, K. Sato, M. Kase, and H. Okuno, “Eddy Current Effect of Very Long Time Constant of Block Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P042, pp. 3327-3329.
[n] Th. Sluyters, “Ion Sources for Proton Linacs”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper K01, pp. 283-290.
[n] Ia. A. Kolesnikov et al., “Proton Beam Size Diagnostics Used in the Vacuum Insulated Tandem Accelerator”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 404-406. doi:10.18429/JACoW-RuPAC2021-WEPSC32
[n] Y. Cai, J. Irwin, M. Sullivan, and Y. T. Yan, “Application of Model-Independent Analysis to PEP-II Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH134, pp. 3555-3557.
[n] H. J. Wang, L. Kang, R. H. Liu, H. Qu, and D. H. Zhu, “The Design and Analysis of Proton Beam Window for CSNSIII”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI032, pp. 3367-3369.
[n] S.Chattopadhyay, “Role of Lasers in Linear Accelerators”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper FR103, pp. 897-904.
[n] L. Deacon et al., “ATF Extraction Line Laser-Wire System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC01, pp. 2636-2638.
[n] R. Soundranayagam, M. A. Maslov, N. V. Mokhov, and I. A. Yazynin, “The SSC Collider Beam Halo Scraper System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 625-628.
[n] D. E. Kim, H. S. Han, H.-G. Lee, K.-H. Park, H. S. Suh, and Y. G. Young-Gyu, “Magnet System for PLS-II Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP032, pp. 208-210.
[n] H. Sato, K. Furukawa, S. Igarashi, T. Ise, M. Muto, and T. Shintomi, “Compensation of Load Fluctuation of Power Supply System for Large Accelerator using SMES”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE009, pp. 755-757.
[n] H.-J. Kwon, Y.-S. Cho, H. S. Kim, Y. G. Song, and S. P. Yun, “Commissioning of the RI Production Beam Line of KOMAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 271-273. doi:10.18429/JACoW-LINAC2016-MOPLR061
[n] S. Casalbuoni et al., “Recent Developments on Superconducting Undulators at ANKA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2485-2488. doi:10.18429/JACoW-IPAC2015-WEBD3
[n] J. Feikes et al., “Specific Operation Modes at the Metrology Light Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2829-2832. doi:10.18429/JACoW-IPAC2016-WEPOW008
[n] H. S. Lin, Y. Q. Cai, S. P. Jiang, Z. B. Sun, and Z. R. Zhou, “Radiation Monitoring System of HLSII”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5011-5013. doi:10.18429/JACoW-IPAC2018-THPML140
[n] D. L. Friesel et al., “Status of the Midwest Proton Radiotherapy Institute”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAA003, pp. 699-701.
[n] A. Schempp, F. Botlo-Pilat, H. Deitinghoff, C. Thibault, and M. de Saint Simon, “A RFQ for the Deceleration of Antiprotons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1228-1231.
[n] Y. T. Huang, C. K. Chan, C.-C. Chang, C. M. Cheng, P. J. Chou, and Y. C. Yang, “Preliminary Design of RF-Shielded Bellows”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1341-1343. doi:10.18429/JACoW-IPAC2019-TUPMP041
[n] C. K. Sinclair, “Very High Voltage Photoemission Electron Guns”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MOPB006, pp. 76-80.
[n] A. Opanasenko, “Conception of X-ray Source Based on Compact Wakefield Undulator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF066, pp. 2415-2417.
[n] M. S. Malovytsia and N. Delerue, “Comparison of the Smith-purcell Radiation Yield for Different Models”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 75-77. doi:10.18429/JACoW-IPAC2016-MOPMB004
[n] D. Trbojevic, L. A. Ahrens, M. Bai, V. I. Ptitsyn, T. Satogata, and J. van Zeijts, “Measurements of the Betatron Functions in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH123, pp. 3135-3137.
[n] W. Br?ñutigam, S. Martin, Yu. Senichev, and E. Zaplatin, “Normal and Superconducting Parts of Linear Accelerator for Neutron Spallation Sources: Main Problems and Possible Solutions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B17, pp. 863-865.
[n] Z. X. Tang and Y. J. Pei, “Design of an Accelerating Tube for a Standing-wave Accelerator based on Genetic Algorithm's Optimal Calculation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3875-3877. doi:10.18429/JACoW-IPAC2014-THPRI048
[n] W. J. D. Johnson and W. E. Stein, “Dual Klystron Modulator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO464, pp. 229-231.
[n] H. Henke, “Millimeter Wave Linac and Wiggler Structures”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 322-327.
[n] E. P. Lee and J. J. Barnard, “Design Considerations for Final Pulse Compression with Bending for Heavy Ion Fusion Drivers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH036, pp. 2929-2931.
[n] O. Meusel, M. Droba, U. Ratzinger, and K. Schulte, “Focusing of Intense Heavy Ion Beams with Plasma Lenses”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEA02, pp. 163-163.
[n] W. T. Weng, “The AGS New Fast Extraction System and the Single Bunch Extraction Test”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2956-2959.
[n] Y. Li, Z. P. Li, S. Wang, and J. Peng, “CSNS Linac Beam Commissioning Tools and Experience”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 750-752. doi:10.18429/JACoW-LINAC2018-THPO032
[n] A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
[n] P. W. Allison, C. R. Emigh, and R. R. Stevens Jr, “Initial Operation of the Beam-Transport System In the LAMPF Injector Complex”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper B-3, pp. 143-161.
[n] R. Cappi, N. Garoby, N. Rasmussen, J. P. Riunaud, H. Schoenauer, and K. Schindl, “Upgrading the CERN PS Booster to 1 GeV for Improved Antiproton Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1614-1617.
[n] R. Bartolini and N. G. Wyles, “Linear Coupling and Lifetime Issues in the DIAMOND Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF071, pp. 2430-2432.
[n] H. Yang, M.-H. Cho, W. Namkung, S. H. Kim, and J.-S. Oh, “Design of Compact C-Band Standing-Wave Accelerator for Medical Radiotherapy”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB049, pp. 285-287.
[n] P. Michelini, “The ELETTRA Control and Data Acquisition System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 821-824.
[n] H. Karadeniz and S. Sultansoy, “QCD Explorer Proposal: E-linac versus E-ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS056, pp. 673-675.
[n] F. M. Mirapeix, J. A??el, J. Amores, J. Presa, and A. Urzainki, “High Precision Manufacturing for LINAC's”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP077, pp. 603-606.
[n] J. D. Galambos, J. A. Holmes, S. Y. Lee, and D. K. Olsen, “A Particle Core Model for Space Charge Dynamics in Rings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOA02A, pp. 279-281.
[n] C. Bourat, A. Massarotti, G. Meyrand, D. T. Tran, D. Tronc, and A. Wrulich, “The 100 MeV Preinjector for the Trieste Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 935-938.
[n] V. Zhabitsky, U. Blell, E. Gorbachev, N. I. Lebedev, and P. J. Spiller, “Transverse Damping System at SIS100”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH095, pp. 3014-3016.
[n] F. E. Hannon et al., “The JLAMP VUV/Soft x-ray User Facility at Jefferson Laboratory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE074, pp. 2302-2304.
[n] W. Zhang, X. Qi, M. Lin, and H. Li, “Simulation study of nanosecond pulse power based on gyromagnetic nonlinear transmission line”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3800-3802. doi:10.18429/JACoW-IPAC2024-THPS29
[n] X. Wang and F. Long, “Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 239-241. doi:10.18429/JACoW-LINAC2018-MOPO116
[n] I. Ching Sheng, B. X. Yang, and S. Sharma, “Design and Analysis of a Be Window for the APS Diagnostics Undulator Beam Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C011, pp. 3574-3576.
[n] L. Wu, X. Guan, X. W. Wang, S. X. Zheng, B. C. Wang, and G. Xialing, “Magnetic Center Position and Tilt Angle of Quadrupole by Vibration Wire Method”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1127-1129. doi:10.18429/JACoW-IPAC2016-TUPMB010
[n] Z. Q. He, M. Ikegami, F. Marti, T. Xu, Y. Zhang, and Q. Zhao, “Beam Dynamics Optimization of FRIB Folding Segment 1 with Single-type Re-buncher Cryomodule”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4042-4044. doi:10.18429/JACoW-IPAC2015-THPF136
[n] K. Jacobs, S. Bradley, A. Carter, B. McAllister, C. Sibley, and F. Wang, “Real Time Dispersion Measurements at the MIT-Bates Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P079, pp. 2099-2101.
[n] S. P. M?©ller, N. Hertel, and J. S. Nielsen, “ASTRID2 -The New Low-Emmitance Light Source in Denmark”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA008, pp. 2487-2489.
[n] H. Suh, Y. Jung, S.-H. Jeong, H.-G. Lee, D. E. Kim, and I. Chun, “Dipole quadrupole magnet design for Korea-4GSR”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3661-3663. doi:10.18429/JACoW-IPAC2023-WEPM044
[n] M. Busch, F. D. Dziuba, H. Podlech, and U. Ratzinger, “Progress in Superconducting CH-Cavity Development”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO016, pp. 574-577.
[n] Y. Chung, J. Bridges, G. Decker, and L. Emery, “Open Loop Compensation for the Eddy Current Effect in the APS Storage Ring Vacuum Chamber”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1525-1528.
[n] X. Xia et al., “Upgrade of Radiation Monitoring System at SSRF for Top-up Operation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR024, pp. 4014-4016.
[n] E. Ferrari et al., “Electron-beam Optimization Studies for the FERMI@Elettra Free-electron Laser”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP063, pp. 1741-1743.
[n] H. Ikeda et al., “Beam Diagnostics for SuperKEKB Damping Ring in Phase-II Operation”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 29-32. doi:10.18429/JACoW-IBIC2018-MOPA02
[n] C. R. Emigh, E. A. Moyer, D. W. Mueller, “Test of LASL Ion Source with 200 - kV Pierce Accelerating Column”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 46-51.
[n] A. K. Ganguly, O. A. Nezhevenko, and V. P. Yakovlev, “Long-Pulse 1.3 GHz Magnicon”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP25F, pp. 1906-1908.
[n] R. Veness et al., “Specification of New Vacuum Chambers for the LHC Experimental Interactions”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS026, pp. 1584-1586.
[n] S. Miura et al., “Mass Production Report of C-band Choke Mode Accelerating Structure and RF Pulse Compressor”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS085, pp. 1737-1739.
[n] D. L. Friesel, J. C. Collins, and W. P. Jones, “Isochronization Studies of the IUCF 200 MeV Cyclotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3389-3392.
[n] M. Jin et al., “Upgraded X-band 950 KeV Linac X-ray Source for On-site Inspection at Petrochemical Complex”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS065, pp. 3574-3576.
[n] O. S. Melnychuk, A. Grassellino, and A. I. Sukhanov, “Medium Field Q-Slope Studies in Low Beta Resonators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2608-2611. doi:10.18429/JACoW-IPAC2014-WEPRI054
[n] N. Yamamoto et al., “Highly Polarized and High Quantum Efficiency Electron Source Using Transmission-type Photocathode”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAB01, pp. 1950-1952.
[n] F. Fontanelli, G. Mini, N. Neufeld, K. Rolli, and M. Sannino, “Interfacing Credit Card-sized PCs to Board Level Electronics”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_062.
[n] G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
[n] A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437.
[n] E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
[n] Y. Liu, A. V. Aleksandrov, C. D. Long, and C. C. Peters, “Parasitic Profile Measurement of 1 MW Neutron Production Beam at SNS Superconducting Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE101, pp. 1221-1223.
[n] T. Satogata et al., “Compact Accelerator Design for a Compton Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA078, pp. 2292-2294.
[n] M. Lindroos, H. Danared, C. Darve, D. P. McGinnis, and S. Molloy, “The ESS Linac Design”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TH2A01, pp. 768-772.
[n] H. Sakai et al., “Improvement of the Position Monitor using White Light Interferometer for Measuring Precise Movement of Compact ERL Superconducting Cavities in Cryomodule”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1787-1789. doi:10.18429/JACoW-IPAC2014-TUPRI092
[n] D. R. Walters and L. H. Morrison, “Flexible and Telescopic Vacuum Chambers for the APS Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH031, pp. 2150-2152.
[n] J. S. Nielsen, N. Hertel, and S. P. Møller, “Installation of the ASTRID2 Synchrotron Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC003, pp. 2909-2911.
[n] T. Kobayashi et al., “Prototype Performance of Digital LLRF Control System for SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC079, pp. 3470-3472.
[n] D. Einfeld, A. Fabris, C. Pasotti, F. Perez, M. Svandrlik, and S. Voigt, “Low Level RF System for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP13C, pp. 1761-1763.
[n] R. D. Kohaupt, “Multi-bunch Instabilities: Observations, Cures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 269-273.
[n] Ye. Ivanisenko et al., “Slice Emittance Measurements for Different Bunch Charges at PITZ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC113, pp. 3149-3151.
[n] T. Lefevre, C. B. Bal, E. Bravin, R. Scrivens, and M. Taborelli, “Scintillating Screens Study for LEIR/LHC Heavy Ion Beams”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM013, pp. XX-XX.
[n] J. A. Holmes, S. M. Cousineau, V. V. Danilov, and Z. Liu, “Computational Beam Dynamics for a High Intensity Ring: Benchmarking with Experiment in the SNS”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TU1IOPK01, pp. 42-47.
[n] D. V. Neuffer and A. Liu, “Stochastic Injection Scenarios and Performance for NuSTORM”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI055, pp. 1469-1471.
[n] A. Fukasawa et al., “Charge and Wavelength Scaling of the UCLA/URLS/INFN Hybrid Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS052, pp. 3609-3611.
[n] C. G. Yao, C. R. Chang, W. Funk, D. Raparia, and D. Swenson, “CCL Design Improvements at SSC Linac”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 521-524.
[n] C. W. Owen, C. A. Radmer, and D. E. Young, “RF Perturbation Measurements in Long Linac Cavities”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 286-290.
[n] C. Baumgarten and H. Zhang, “PSI Injector II and the 72 MeV Transfer Line: MinT-Simulation vs. Measurements”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 547-550. doi:10.18429/JACoW-HB2023-THBP34
[n] D. J. Kelliher et al., “Study of Resonance Crossing in Non-scaling FFAGs using the S-POD Linear Paul Trap”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1571-1573. doi:10.18429/JACoW-IPAC2014-TUPRI009
[n] A. Raimondo et al., “The Hardware Recognition System for the SM18 LHC Cryomagnet Test Benches”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP522, pp. XX-XX.
[n] S. Tariq, K. Ammigan, P. Hurh, P. Liu, R. Schultz, and J. Shang, “Li Material Testing- Fermilab Antiproton Source Lithium Collection Lens”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG013, pp. 1452-1454.
[n] D. B. Belohrad, S. Longo, OP. Odier, and S. Thoulet, “Mechanical Design of the Intensity Measurement Devices for the LHC”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB09, pp. 253-255.
[n] I. V. Agapov, G. Geloni, and I. Zagorodnov, “Statistical Optimization of FEL Performance”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1496-1498. doi:10.18429/JACoW-IPAC2015-TUPWA037
[n] D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
[n] W. X. Cheng, W. J. Corbett, and A. S. Fisher, “Streak-Camera Measurements with High Currents in PEP-II and Variable Optics in SPEAR3”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF019, pp. 133-137.
[n] F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
[n] M. Steck et al., “Operation of the HESR Storage Ring of the FAIR Project with Ions and Rare Isotopes”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP002, pp. 3722-3724.
[n] A. Mostacci, M. Migliorati, L. Palumbo, D. Alesini, B. Spataro, and C. Vaccarezza, “Issues for a Multi-bunch Operation with SPARC C-band Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR051, pp. 3042-3044.
[n] H.-J. Kreidel and K. Merle, “Automatic Beam-Steering of the Mainz Microtron”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G202, pp. 245-247.
[n] Yu-Seok Kim, “DESIGN OF KIRAMS-13 CYCLOTRON CONTROL SYSTEM”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P13, pp. XX-XX.
[n] R. G. Eichhorn, C. G. Daly, F. Furuta, and A. Ganshin, “Investigation of Thermocurrents Limiting the Performance of Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2621-2623. doi:10.18429/JACoW-IPAC2014-WEPRI060
[n] A. Jansson, M. Eshraqi, and S. Molloy, “Beam Diagnostics for ESS Commissioning and Early Operation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 273-275. doi:10.18429/JACoW-IPAC2016-MOPMR020
[n] G. R. Li et al., “Study of Achieving Low Energy Beam by Energy Degradation and Direct Resonance Extraction in a Compact Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 850-852. doi:10.18429/JACoW-IPAC2016-MOPOY003
[n] L. W. Zhang, J. Li, W. D. Wang, and Y. Li, “Performance Optimization of the Stacked-Blumlein”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD072, pp. 3680-3682.
[n] J. Kamiya, Y. Hikichi, M. Kinsho, M. Nishikawa, N. Ogiwara, and T. Yanagibashi, “Status of the Vacuum System in J-PARC RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD013, pp. 2522-2524.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Gusarova, I. I. Petrushina, E. A. Savin, A. N. Stolbikova, and V. Zvyagintsev, “Multipacting Prediction for the 106.1 MHz Quarter Wave Resonator”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP110, pp. 313-316.
- K. Kittimanapun, Ch. Dhammatong, N. Juntong, W. Phacheerak, and M. Phanak, “Development of a Pre-Injector Test Bench for Future SLRI Light Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4499-4501.
- X. Y. Li, Z. Duan, D. Ji, Y. Jiao, and Y. F. Yang, “Effects of Insertion Devices on Stored Electron Beam of High Energy Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 911-913.
- M. A. Uchida, “The Alignment of the MICE Tracker Detectors”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2597-2600.
- Y. Hwang, T. Tajima, G. G. Anderson, C. P. J. Barty, D. J. Gibson, and R. A. Marsh, “LLNL Laser-Compton X-ray Characterization”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1885-1888.
- M. Walter et al., “Time Resolved Emittance Measurement in the University of Maryland Electron Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB074, pp. 2574-2576.
- A. S. Plastun et al., “RF Design of the Nuclotron-NICA 145.2 MHz RFQ”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 595-597.
- F. J. C. Wenander, V. Bencini, N. Bidault, G. Khatri, H. Pahl, and A. I. Pikin, “Latest EBIS Development Activities at CERN”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH1WH01, unpublished.
- A. Scheinker, “Adaptive Accelerator Tuning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1237-1239.
- F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1356-1358.
- J.-C. Chang et al., “Status of the Utility System Construction for the 3 GeV TPS Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD039, pp. 2597-2599.
- R. Yadav, A. Penirschke, S. Preu, and S. Regensburger, “Optimization of GaAs Based Field Effect Transistors for THz Detection at Particle Accelerators”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper WEPP23, unpublished.
- G. X. Xia, A. Caldwell, C. Huang, and W. B. Mori, “Simulation Study of Proton-Driven PWFA Based on CERN SPS Beam”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP108, pp. 301-303.
- N. R. Neveu, S. T, P. Hudson, J. M. Larson, and L. K. Spentzouris, “Comparison of Model-Based and Heuristic Optimization Algorithms Applied to Photoinjectors Using Libensemble”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 22-24.
- W. Shields, A. Finn, P. Karataev, R. Bartolini, I. P. S. Martin, and G. Rehm, “Longitudinal Beam Profile Measurements of the Microbunching Instability”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3706-3708.
- M. P. Kelly, J. Delayen, J. D. Fuerst, M. Kedzie, S. I. Sharamentov, and K. W. Shepard, “Microphonics Measurements in SRF Cavities for RIA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB043, pp. 1291-1293.
- T.-C. Yu et al., “Petra Cavity Vacuum RF Condition with Field Balance Mechanism for TPS Storage Ring in NSRRC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI061, pp. 2833-2835.
- R. T. P. D, S. Jolly, J. K. Jones, B. D. Muratori, and S. B. van der Geer, “Modelling of the EMMA ns-FFAG Ring Using GPT”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC079, pp. 319-321.
- W. Koprek et al., “Intra-train Longitudinal Feedback for Beam Stabilization at FLASH”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOAI2, pp. 537-543.
- D. K. Kalantaryan, G. A. Amatuni, P. Beaud, G. Ingold, A. Streun, and V. M. Tsakanov, “Laser -- Beam Interaction and Calculation of the Sliced Bunch Radiation Spectra for the SLS FEMTO Beam Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC026, pp. 2040-2042.
- M. Fishman and D. Reagan, “The SLAC Long Ion Chamber System for Machine Protection”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1096-1099.
- A. V. Fedotov et al., “Bunched Beam Electron Cooler for Low-energy RHIC Operation”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOAA1, pp. 363-365.
- S. Aderhold et al., “3.9 GHz SRF Production Cavities for LCLS-II”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 173-176.
- M. Kumada, H. Ogawa, K. Sato, M. Kase, and H. Okuno, “Eddy Current Effect of Very Long Time Constant of Block Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P042, pp. 3327-3329.
- Th. Sluyters, “Ion Sources for Proton Linacs”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper K01, pp. 283-290.
- Ia. A. Kolesnikov et al., “Proton Beam Size Diagnostics Used in the Vacuum Insulated Tandem Accelerator”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 404-406.
- Y. Cai, J. Irwin, M. Sullivan, and Y. T. Yan, “Application of Model-Independent Analysis to PEP-II Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH134, pp. 3555-3557.
- H. J. Wang, L. Kang, R. H. Liu, H. Qu, and D. H. Zhu, “The Design and Analysis of Proton Beam Window for CSNSIII”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI032, pp. 3367-3369.
- S.Chattopadhyay, “Role of Lasers in Linear Accelerators”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper FR103, pp. 897-904.
- L. Deacon et al., “ATF Extraction Line Laser-Wire System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAC01, pp. 2636-2638.
- R. Soundranayagam, M. A. Maslov, N. V. Mokhov, and I. A. Yazynin, “The SSC Collider Beam Halo Scraper System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 625-628.
- D. E. Kim, H. S. Han, H.-G. Lee, K.-H. Park, H. S. Suh, and Y. G. Young-Gyu, “Magnet System for PLS-II Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP032, pp. 208-210.
- H. Sato, K. Furukawa, S. Igarashi, T. Ise, M. Muto, and T. Shintomi, “Compensation of Load Fluctuation of Power Supply System for Large Accelerator using SMES”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE009, pp. 755-757.
- H.-J. Kwon, Y.-S. Cho, H. S. Kim, Y. G. Song, and S. P. Yun, “Commissioning of the RI Production Beam Line of KOMAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 271-273.
- S. Casalbuoni et al., “Recent Developments on Superconducting Undulators at ANKA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2485-2488.
- J. Feikes et al., “Specific Operation Modes at the Metrology Light Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2829-2832.
- H. S. Lin, Y. Q. Cai, S. P. Jiang, Z. B. Sun, and Z. R. Zhou, “Radiation Monitoring System of HLSII”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 5011-5013.
- D. L. Friesel et al., “Status of the Midwest Proton Radiotherapy Institute”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAA003, pp. 699-701.
- A. Schempp, F. Botlo-Pilat, H. Deitinghoff, C. Thibault, and M. de Saint Simon, “A RFQ for the Deceleration of Antiprotons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1228-1231.
- Y. T. Huang, C. K. Chan, C.-C. Chang, C. M. Cheng, P. J. Chou, and Y. C. Yang, “Preliminary Design of RF-Shielded Bellows”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1341-1343.
- C. K. Sinclair, “Very High Voltage Photoemission Electron Guns”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MOPB006, pp. 76-80.
- A. Opanasenko, “Conception of X-ray Source Based on Compact Wakefield Undulator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF066, pp. 2415-2417.
- M. S. Malovytsia and N. Delerue, “Comparison of the Smith-purcell Radiation Yield for Different Models”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 75-77.
- D. Trbojevic, L. A. Ahrens, M. Bai, V. I. Ptitsyn, T. Satogata, and J. van Zeijts, “Measurements of the Betatron Functions in RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH123, pp. 3135-3137.
- W. Br?ñutigam, S. Martin, Yu. Senichev, and E. Zaplatin, “Normal and Superconducting Parts of Linear Accelerator for Neutron Spallation Sources: Main Problems and Possible Solutions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B17, pp. 863-865.
- Z. X. Tang and Y. J. Pei, “Design of an Accelerating Tube for a Standing-wave Accelerator based on Genetic Algorithm's Optimal Calculation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3875-3877.
- W. J. D. Johnson and W. E. Stein, “Dual Klystron Modulator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO464, pp. 229-231.
- H. Henke, “Millimeter Wave Linac and Wiggler Structures”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 322-327.
- E. P. Lee and J. J. Barnard, “Design Considerations for Final Pulse Compression with Bending for Heavy Ion Fusion Drivers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH036, pp. 2929-2931.
- O. Meusel, M. Droba, U. Ratzinger, and K. Schulte, “Focusing of Intense Heavy Ion Beams with Plasma Lenses”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEA02, pp. 163-163.
- W. T. Weng, “The AGS New Fast Extraction System and the Single Bunch Extraction Test”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2956-2959.
- Y. Li, Z. P. Li, S. Wang, and J. Peng, “CSNS Linac Beam Commissioning Tools and Experience”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 750-752.
- A. Koschik et al., “Optics Flexibility and Dispersion Matching at Injection into the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS014, pp. 1517-1519.
- P. W. Allison, C. R. Emigh, and R. R. Stevens Jr, “Initial Operation of the Beam-Transport System In the LAMPF Injector Complex”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper B-3, pp. 143-161.
- R. Cappi, N. Garoby, N. Rasmussen, J. P. Riunaud, H. Schoenauer, and K. Schindl, “Upgrading the CERN PS Booster to 1 GeV for Improved Antiproton Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1614-1617.
- R. Bartolini and N. G. Wyles, “Linear Coupling and Lifetime Issues in the DIAMOND Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF071, pp. 2430-2432.
- H. Yang, M.-H. Cho, W. Namkung, S. H. Kim, and J.-S. Oh, “Design of Compact C-Band Standing-Wave Accelerator for Medical Radiotherapy”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB049, pp. 285-287.
- P. Michelini, “The ELETTRA Control and Data Acquisition System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 821-824.
- H. Karadeniz and S. Sultansoy, “QCD Explorer Proposal: E-linac versus E-ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS056, pp. 673-675.
- F. M. Mirapeix, J. A??el, J. Amores, J. Presa, and A. Urzainki, “High Precision Manufacturing for LINAC's”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP077, pp. 603-606.
- J. D. Galambos, J. A. Holmes, S. Y. Lee, and D. K. Olsen, “A Particle Core Model for Space Charge Dynamics in Rings”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOA02A, pp. 279-281.
- C. Bourat, A. Massarotti, G. Meyrand, D. T. Tran, D. Tronc, and A. Wrulich, “The 100 MeV Preinjector for the Trieste Synchrotron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 935-938.
- V. Zhabitsky, U. Blell, E. Gorbachev, N. I. Lebedev, and P. J. Spiller, “Transverse Damping System at SIS100”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH095, pp. 3014-3016.
- F. E. Hannon et al., “The JLAMP VUV/Soft x-ray User Facility at Jefferson Laboratory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE074, pp. 2302-2304.
- W. Zhang, X. Qi, M. Lin, and H. Li, “Simulation study of nanosecond pulse power based on gyromagnetic nonlinear transmission line”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS29, pp. 3800-3802.
- X. Wang and F. Long, “Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 239-241.
- I. Ching Sheng, B. X. Yang, and S. Sharma, “Design and Analysis of a Be Window for the APS Diagnostics Undulator Beam Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C011, pp. 3574-3576.
- L. Wu, X. Guan, X. W. Wang, S. X. Zheng, B. C. Wang, and G. Xialing, “Magnetic Center Position and Tilt Angle of Quadrupole by Vibration Wire Method”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1127-1129.
- Z. Q. He, M. Ikegami, F. Marti, T. Xu, Y. Zhang, and Q. Zhao, “Beam Dynamics Optimization of FRIB Folding Segment 1 with Single-type Re-buncher Cryomodule”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4042-4044.
- K. Jacobs, S. Bradley, A. Carter, B. McAllister, C. Sibley, and F. Wang, “Real Time Dispersion Measurements at the MIT-Bates Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P079, pp. 2099-2101.
- S. P. M?©ller, N. Hertel, and J. S. Nielsen, “ASTRID2 -The New Low-Emmitance Light Source in Denmark”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA008, pp. 2487-2489.
- H. Suh, Y. Jung, S.-H. Jeong, H.-G. Lee, D. E. Kim, and I. Chun, “Dipole quadrupole magnet design for Korea-4GSR”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM044, pp. 3661-3663.
- M. Busch, F. D. Dziuba, H. Podlech, and U. Ratzinger, “Progress in Superconducting CH-Cavity Development”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO016, pp. 574-577.
- Y. Chung, J. Bridges, G. Decker, and L. Emery, “Open Loop Compensation for the Eddy Current Effect in the APS Storage Ring Vacuum Chamber”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1525-1528.
- X. Xia et al., “Upgrade of Radiation Monitoring System at SSRF for Top-up Operation”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR024, pp. 4014-4016.
- E. Ferrari et al., “Electron-beam Optimization Studies for the FERMI@Elettra Free-electron Laser”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP063, pp. 1741-1743.
- H. Ikeda et al., “Beam Diagnostics for SuperKEKB Damping Ring in Phase-II Operation”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 29-32.
- C. R. Emigh, E. A. Moyer, D. W. Mueller, “Test of LASL Ion Source with 200 - kV Pierce Accelerating Column”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 46-51.
- A. K. Ganguly, O. A. Nezhevenko, and V. P. Yakovlev, “Long-Pulse 1.3 GHz Magnicon”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP25F, pp. 1906-1908.
- R. Veness et al., “Specification of New Vacuum Chambers for the LHC Experimental Interactions”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS026, pp. 1584-1586.
- S. Miura et al., “Mass Production Report of C-band Choke Mode Accelerating Structure and RF Pulse Compressor”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS085, pp. 1737-1739.
- D. L. Friesel, J. C. Collins, and W. P. Jones, “Isochronization Studies of the IUCF 200 MeV Cyclotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3389-3392.
- M. Jin et al., “Upgraded X-band 950 KeV Linac X-ray Source for On-site Inspection at Petrochemical Complex”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS065, pp. 3574-3576.
- O. S. Melnychuk, A. Grassellino, and A. I. Sukhanov, “Medium Field Q-Slope Studies in Low Beta Resonators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2608-2611.
- N. Yamamoto et al., “Highly Polarized and High Quantum Efficiency Electron Source Using Transmission-type Photocathode”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOAB01, pp. 1950-1952.
- F. Fontanelli, G. Mini, N. Neufeld, K. Rolli, and M. Sannino, “Interfacing Credit Card-sized PCs to Board Level Electronics”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_062.
- G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
- A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437.
- E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623.
- Y. Liu, A. V. Aleksandrov, C. D. Long, and C. C. Peters, “Parasitic Profile Measurement of 1 MW Neutron Production Beam at SNS Superconducting Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE101, pp. 1221-1223.
- T. Satogata et al., “Compact Accelerator Design for a Compton Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA078, pp. 2292-2294.
- M. Lindroos, H. Danared, C. Darve, D. P. McGinnis, and S. Molloy, “The ESS Linac Design”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TH2A01, pp. 768-772.
- H. Sakai et al., “Improvement of the Position Monitor using White Light Interferometer for Measuring Precise Movement of Compact ERL Superconducting Cavities in Cryomodule”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1787-1789.
- D. R. Walters and L. H. Morrison, “Flexible and Telescopic Vacuum Chambers for the APS Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH031, pp. 2150-2152.
- J. S. Nielsen, N. Hertel, and S. P. Møller, “Installation of the ASTRID2 Synchrotron Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC003, pp. 2909-2911.
- T. Kobayashi et al., “Prototype Performance of Digital LLRF Control System for SuperKEKB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC079, pp. 3470-3472.
- D. Einfeld, A. Fabris, C. Pasotti, F. Perez, M. Svandrlik, and S. Voigt, “Low Level RF System for the ANKA Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP13C, pp. 1761-1763.
- R. D. Kohaupt, “Multi-bunch Instabilities: Observations, Cures”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 269-273.
- Ye. Ivanisenko et al., “Slice Emittance Measurements for Different Bunch Charges at PITZ”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC113, pp. 3149-3151.
- T. Lefevre, C. B. Bal, E. Bravin, R. Scrivens, and M. Taborelli, “Scintillating Screens Study for LEIR/LHC Heavy Ion Beams”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM013, pp. XX-XX.
- J. A. Holmes, S. M. Cousineau, V. V. Danilov, and Z. Liu, “Computational Beam Dynamics for a High Intensity Ring: Benchmarking with Experiment in the SNS”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TU1IOPK01, pp. 42-47.
- D. V. Neuffer and A. Liu, “Stochastic Injection Scenarios and Performance for NuSTORM”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI055, pp. 1469-1471.
- A. Fukasawa et al., “Charge and Wavelength Scaling of the UCLA/URLS/INFN Hybrid Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS052, pp. 3609-3611.
- C. G. Yao, C. R. Chang, W. Funk, D. Raparia, and D. Swenson, “CCL Design Improvements at SSC Linac”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 521-524.
- C. W. Owen, C. A. Radmer, and D. E. Young, “RF Perturbation Measurements in Long Linac Cavities”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 286-290.
- C. Baumgarten and H. Zhang, “PSI Injector II and the 72 MeV Transfer Line: MinT-Simulation vs. Measurements”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP34, pp. 547-550.
- D. J. Kelliher et al., “Study of Resonance Crossing in Non-scaling FFAGs using the S-POD Linear Paul Trap”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1571-1573.
- A. Raimondo et al., “The Hardware Recognition System for the SM18 LHC Cryomagnet Test Benches”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP522, pp. XX-XX.
- S. Tariq, K. Ammigan, P. Hurh, P. Liu, R. Schultz, and J. Shang, “Li Material Testing- Fermilab Antiproton Source Lithium Collection Lens”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG013, pp. 1452-1454.
- D. B. Belohrad, S. Longo, OP. Odier, and S. Thoulet, “Mechanical Design of the Intensity Measurement Devices for the LHC”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB09, pp. 253-255.
- I. V. Agapov, G. Geloni, and I. Zagorodnov, “Statistical Optimization of FEL Performance”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1496-1498.
- D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
- W. X. Cheng, W. J. Corbett, and A. S. Fisher, “Streak-Camera Measurements with High Currents in PEP-II and Variable Optics in SPEAR3”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF019, pp. 133-137.
- F. Locci and S. Magnoni, “IEPLC Framework, Automated Communication in a Heterogeneous Control System Environment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC031, pp. 139-142.
- M. Steck et al., “Operation of the HESR Storage Ring of the FAIR Project with Ions and Rare Isotopes”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP002, pp. 3722-3724.
- A. Mostacci, M. Migliorati, L. Palumbo, D. Alesini, B. Spataro, and C. Vaccarezza, “Issues for a Multi-bunch Operation with SPARC C-band Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR051, pp. 3042-3044.
- H.-J. Kreidel and K. Merle, “Automatic Beam-Steering of the Mainz Microtron”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G202, pp. 245-247.
- Yu-Seok Kim, “DESIGN OF KIRAMS-13 CYCLOTRON CONTROL SYSTEM”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P13, pp. XX-XX.
- R. G. Eichhorn, C. G. Daly, F. Furuta, and A. Ganshin, “Investigation of Thermocurrents Limiting the Performance of Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2621-2623.
- A. Jansson, M. Eshraqi, and S. Molloy, “Beam Diagnostics for ESS Commissioning and Early Operation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 273-275.
- G. R. Li et al., “Study of Achieving Low Energy Beam by Energy Degradation and Direct Resonance Extraction in a Compact Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 850-852.
- L. W. Zhang, J. Li, W. D. Wang, and Y. Li, “Performance Optimization of the Stacked-Blumlein”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD072, pp. 3680-3682.
- J. Kamiya, Y. Hikichi, M. Kinsho, M. Nishikawa, N. Ogiwara, and T. Yanagibashi, “Status of the Vacuum System in J-PARC RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD013, pp. 2522-2524.
Back to search