Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] X. J. Hu et al., “Stochastic Cooling Simulation of Rare Isotope Beam and its Secondary Beam”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 107-111. doi:10.18429/JACoW-HIAT2018-WEOAA03
[n] T. F. Silva, M. N. Martins, and P. B. Rios, “Studies of the Alignment Tolerance for the Injector System of the IFUSP Microtron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH194, pp. 517-519.
[n] Q. T. Zhao, J. C. Yang, Z. M. Zhang, and H. W. Zhao, “Preliminary Investigations and Pre-Research Scheme of High Average Current Electron Injectors at IMP”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 90-93. doi:10.18429/JACoW-ERL2019-WEPNEC13
[n] D. P. McGinnis, “New Design Approaches for High Intensity Superconducting Linacs ÔÇô The New ESS Linac Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 23-27. doi:10.18429/JACoW-IPAC2014-MOYBA02
[n] M. Abo-Bakr, B. C. Kuske, and A. N. Matveenko, “Magnet Optics and Beam Dynamics of BERLinPro”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD102, pp. 2135-2137.
[n] T. Watanabe, K. Fukami, T. Nakanishi, and S. Sasaki, “Magnetic-field Variable Permanent Dipole Magnet for Future Light Sources”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1253-1255. doi:10.18429/JACoW-IPAC2014-TUPRO092
[n] J. Kirchgessner et al., “Prototype 500 MHz Planar RF Input Window for a B-Factory Accelerating Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 678-681.
[n] S. Tochitsky, C. Joshi, and C. Sung, “Development of a THz Seed Source for FEL Microbunching Experiment at the Neptune Laboratory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS040, pp. 1275-1277.
[n] M. Klein, A.-S. Mueller, and K. G. Sonnad, “Simulations of the Microbunching Instability at ANKA using a Vlasov-Fokker-Planck Solver”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC095, pp. 2232-2234.
[n] J. Tan, M. Ludwig, L. Soby, M. Sordet, and M. Wendt, “Commissioning of the CERN Linac4 BPM System with 50 MeV Proton Beams”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA037, pp. 750-752.
[n] C. E. Mayes and G. H. Hoffstaetter, “Coherent Synchrotron Radiation Simulations for the Cornell Energy Recovery Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE097, pp. 2353-2355.
[n] S. Otsuki, K. Koyama, M. Yoshida, Y. Matsumura, S. Mima, and M. Uesaka, “Development on On-chip Radiation Source using Dielectric Laser Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1434-1436. doi:10.18429/JACoW-IPAC2014-TUPME037
[n] B. C. Kuske, M. Abo-Bakr, and A. N. Matveenko, “Merger Considerations for BerlinPro”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD103, pp. 2138-2140.
[n] I. Meshkov, A. Sidorin, A. Smirnov, E. Syresin, G. Trubnikov, and P. Zenkevich, “NUMERICAL SIMULATION OF PARTICLE DYNAMICS IN STORAGE RINGS USING BETACOOL CODE”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBI04, pp. XX-XX.
[n] C. Son and M. Park, “The RAON integrated control system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3863-3865. doi:10.18429/JACoW-IPAC2023-WEPM126
[n] B. Wu, X. Li, and H. Sun, “MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2925-2927. doi:10.18429/JACoW-IPAC2019-WEPRB051
[n] M. Giovannozzi et al., “Non-linear Beam Dynamics Tests at the CERN PS in the Framework of the Multi-turn Extraction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC082, pp. 1365-1367.
[n] M. Ferrario et al., “Velocity Bunching Experiments at SPARC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP071, pp. 533-535.
[n] J. A. Tsemo Kamga, W. F. O. Müller, K. K. Stavrakakis, and T. Weiland, “Pickup Design with Beta Matching”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC080, pp. 1189-1191.
[n] S.-Y. Chen, M. Krishnan, A. Maksimchuk, and D. Umstadter, “Characteristics of Electron Acceleration in a Self-Modulated Laser Wakefield”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA120, pp. 3666-3668.
[n] Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS074, pp. 3601-3603.
[n] L. Y. Ji et al., “The Design and Calculation on the Injection and Central Region for CYCIAE-50”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 39-41. doi:10.18429/JACoW-CYCLOTRONS2019-MOP007
[n] C. Milardi et al., “DANE Operation with the Upgraded KLOE-2 Detector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1883-1885. doi:10.18429/JACoW-IPAC2014-WEOCA03
[n] L. Zhao, B. Cluggish, and J. S. Kim, “2D Extension of GEM (The Generalized ECR Ion Source Modeling Code)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS079, pp. 1832-1834.
[n] M. Takagi et al., “Control of the J-PARC Slow Extraction Line Based on Embedded EPICS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP076, pp. 549-551.
[n] Y. Zhang, X. J. Deng, W.-H. Huang, Z. Pan, and C.-X. Tang, “A General Optimization Method for High Harmonic Generation Beamline”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 638-642. doi:10.18429/JACoW-FEL2019-THP022
[n] L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 164-166. doi:10.18429/JACoW-IPAC2016-MOPMB034
[n] S. Posen, D. Gonnella, G. H. Hoffstaetter, M. Liepe, and J. Oh, “Residual Resistance Studies at Cornell”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC079, pp. 2393-2395.
[n] I. Roth, N. Butler, M. P. J. Gaudreau, M. K. Kempkes, and R. E. Simpson, “Thyratron Replacement”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2512-2514. doi:10.18429/JACoW-IPAC2018-WEPMF063
[n] U. Dorda, M. Benedikt, A. Fabich, and F. Osmic, “Status of the MedAustron Ion Beam Therapy Centre”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR046, pp. 4077-4079.
[n] M. Kuriki et al., “An experimental study of X-Y emittance repartitioning in KEK-STF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2642-2645. doi:10.18429/JACoW-IPAC2023-WEOGC2
[n] U. Mavric et al., “Performance of a Compact LLRF System using Analog RF Backplane in MTCA.4 Crates”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2438-2440. doi:10.18429/JACoW-IPAC2014-WEPME069
[n] P. A. Schmelzbach, “Concluding Remarks”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 511-513.
[n] B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1046-1048.
[n] W. Lou, D. Hartill, D. Rice, D. Rubin, and J. Welch, “Permanent Magnet Quadrupoles for CESR Phase-III Upgrade”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P005, pp. 3236-3238.
[n] S. Banerjee, M. G. Abbott, L. Bobb, and I. Kempf, “Modified Fast Orbit Feedback Controller for Disturbance Attenuation in Long Straights for Diamond-II”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 119-122. doi:10.18429/JACoW-IBIC2023-MOP041
[n] M. Bai et al., “RHIC Spin Flipper Status and Simulation Studies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP191, pp. 447-449.
[n] J. G. Alessi et al., “Design and Performance of the Matching Beamline between the BNL EBIS and an RFQ”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS083, pp. 1844-1846.
[n] S. Canella and G. Bassato, “Design of a Distributed Control System Based on CORBA and JAVA for a New RIB Facility at LNL”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP002, pp. XX-XX.
[n] B. Autin, “Dispersion Suppression with Missing Magnets in a FODO Structure - Application to the CERN Antiproton Accumulator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3493-3496.
[n] P. Orel, E. Janezic, P. L. Lemut, S. Zorzut, S. Hunziker, and V. Schlott, “Test Results of the Libera Sync 3 CW Reference Clock Transfer System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1751-1753. doi:10.18429/JACoW-IPAC2014-TUPRI079
[n] C. Potratz, H.-W. Glock, U. van Rienen, and F. Marhauser, “Automatic Pole and Q-Value Extraction for RF Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC098, pp. 2241-2243.
[n] E. Tanabe, “Breakdown in High-Gradient Accelerator Cavities”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0028, pp. 403-404.
[n] M.-H. Wang, Y. Cai, R. O. Hettel, Y. Nosochkov, and M. Borland, “Dynamic Aperture and Tolerances for PEP-X Ultimate Storage Ring Design”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC074, pp. 3065-3067.
[n] R. Tikhoplav, A. Melissinos, N. Barov, and J. Santucci, “Laser Acceleration of Electrons”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI074, pp. 984-985.
[n] M. C. Alabau Pons, F. Schmidt, R. Tomas, and E. H. Maclean, “Beta-beating in the Effective Model of the LHC Using PTC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC079, pp. 2202-2204.
[n] F. Tecker et al., “Experimental Study of the Effect of Beam Loading on RF Breakdown Rate in CLIC High-gradient Accelerating Structures”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME054, pp. 1691-1693.
[n] V. G. Dudnikov and C. M. Ankenbrandt, “Resonant Reaction with a Superintense Circulating Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD043, pp. 1497-1499.
[n] D. Manglunki et al., “Ions for LHC: Performance of the Injector Chain”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS022, pp. 2529-2531.
[n] P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “Design of a Hybrid Seven-Bend-Achromat Lattice for a High-Energy Diffraction-Limited Storage Ring Using a New Optimization Method”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1528-1531. doi:10.18429/JACoW-IPAC2019-TUPGW054
[n] O. Tanaka et al., “Beam Loss Studies for the KEK Compact-ERL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 349-352. doi:10.18429/JACoW-IPAC2014-MOPRO109
[n] H. Okuno, S. Fujishima, T. Tominaka, A. Goto, and Y. Yano, “Design and Construction of the Superconducting Bending Magnet for the Injection System of the RIKEN SRC”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P1-04, pp. XX-XX.
[n] C. I. Clarke et al., “Plasmas, Dielectrics and the Ultrafast: First Science and Operational Experience at FACET”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TH3A04, pp. 802-806.
[n] Q. Liao et al., “Recent Progress of Proton Acceleration at Peking University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1588-1591. doi:10.18429/JACoW-IPAC2016-TUPMY018
[n] R. L. Geng, J. F. Fischer, C. E. Reece, A. V. Reilly, F. S. He, and Y. M. Li, “Pursuing the Origin and Remediation of Low Q0 observed in the Original CEBAF Cryomodules”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2828-2830. doi:10.18429/JACoW-IPAC2014-THOBB01
[n] F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
[n] F. F. Wu et al., “Design and Calculation of the Stripline Beam Position Monitor for HLS II Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME041, pp. 562-564.
For LaTeX
Use Complete Form
For BibTeX
References
- X. J. Hu et al., “Stochastic Cooling Simulation of Rare Isotope Beam and its Secondary Beam”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 107-111.
- T. F. Silva, M. N. Martins, and P. B. Rios, “Studies of the Alignment Tolerance for the Injector System of the IFUSP Microtron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH194, pp. 517-519.
- Q. T. Zhao, J. C. Yang, Z. M. Zhang, and H. W. Zhao, “Preliminary Investigations and Pre-Research Scheme of High Average Current Electron Injectors at IMP”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 90-93.
- D. P. McGinnis, “New Design Approaches for High Intensity Superconducting Linacs ÔÇô The New ESS Linac Design”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 23-27.
- M. Abo-Bakr, B. C. Kuske, and A. N. Matveenko, “Magnet Optics and Beam Dynamics of BERLinPro”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD102, pp. 2135-2137.
- T. Watanabe, K. Fukami, T. Nakanishi, and S. Sasaki, “Magnetic-field Variable Permanent Dipole Magnet for Future Light Sources”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1253-1255.
- J. Kirchgessner et al., “Prototype 500 MHz Planar RF Input Window for a B-Factory Accelerating Cavity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 678-681.
- S. Tochitsky, C. Joshi, and C. Sung, “Development of a THz Seed Source for FEL Microbunching Experiment at the Neptune Laboratory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS040, pp. 1275-1277.
- M. Klein, A.-S. Mueller, and K. G. Sonnad, “Simulations of the Microbunching Instability at ANKA using a Vlasov-Fokker-Planck Solver”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC095, pp. 2232-2234.
- J. Tan, M. Ludwig, L. Soby, M. Sordet, and M. Wendt, “Commissioning of the CERN Linac4 BPM System with 50 MeV Proton Beams”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA037, pp. 750-752.
- C. E. Mayes and G. H. Hoffstaetter, “Coherent Synchrotron Radiation Simulations for the Cornell Energy Recovery Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE097, pp. 2353-2355.
- S. Otsuki, K. Koyama, M. Yoshida, Y. Matsumura, S. Mima, and M. Uesaka, “Development on On-chip Radiation Source using Dielectric Laser Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1434-1436.
- B. C. Kuske, M. Abo-Bakr, and A. N. Matveenko, “Merger Considerations for BerlinPro”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD103, pp. 2138-2140.
- I. Meshkov, A. Sidorin, A. Smirnov, E. Syresin, G. Trubnikov, and P. Zenkevich, “NUMERICAL SIMULATION OF PARTICLE DYNAMICS IN STORAGE RINGS USING BETACOOL CODE”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBI04, pp. XX-XX.
- C. Son and M. Park, “The RAON integrated control system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM126, pp. 3863-3865.
- B. Wu, X. Li, and H. Sun, “MA RF Cavity Design and Simulation for CSNS/RCS Upgrade Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2925-2927.
- M. Giovannozzi et al., “Non-linear Beam Dynamics Tests at the CERN PS in the Framework of the Multi-turn Extraction”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC082, pp. 1365-1367.
- M. Ferrario et al., “Velocity Bunching Experiments at SPARC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP071, pp. 533-535.
- J. A. Tsemo Kamga, W. F. O. Müller, K. K. Stavrakakis, and T. Weiland, “Pickup Design with Beta Matching”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC080, pp. 1189-1191.
- S.-Y. Chen, M. Krishnan, A. Maksimchuk, and D. Umstadter, “Characteristics of Electron Acceleration in a Self-Modulated Laser Wakefield”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA120, pp. 3666-3668.
- Y. Iwata et al., “Design of Superconducting Rotating-gantry for Heavy-ion Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS074, pp. 3601-3603.
- L. Y. Ji et al., “The Design and Calculation on the Injection and Central Region for CYCIAE-50”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 39-41.
- C. Milardi et al., “DANE Operation with the Upgraded KLOE-2 Detector”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1883-1885.
- L. Zhao, B. Cluggish, and J. S. Kim, “2D Extension of GEM (The Generalized ECR Ion Source Modeling Code)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS079, pp. 1832-1834.
- M. Takagi et al., “Control of the J-PARC Slow Extraction Line Based on Embedded EPICS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP076, pp. 549-551.
- Y. Zhang, X. J. Deng, W.-H. Huang, Z. Pan, and C.-X. Tang, “A General Optimization Method for High Harmonic Generation Beamline”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 638-642.
- L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 164-166.
- S. Posen, D. Gonnella, G. H. Hoffstaetter, M. Liepe, and J. Oh, “Residual Resistance Studies at Cornell”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC079, pp. 2393-2395.
- I. Roth, N. Butler, M. P. J. Gaudreau, M. K. Kempkes, and R. E. Simpson, “Thyratron Replacement”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2512-2514.
- U. Dorda, M. Benedikt, A. Fabich, and F. Osmic, “Status of the MedAustron Ion Beam Therapy Centre”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR046, pp. 4077-4079.
- M. Kuriki et al., “An experimental study of X-Y emittance repartitioning in KEK-STF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGC2, pp. 2642-2645.
- U. Mavric et al., “Performance of a Compact LLRF System using Analog RF Backplane in MTCA.4 Crates”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2438-2440.
- P. A. Schmelzbach, “Concluding Remarks”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 511-513.
- B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1046-1048.
- W. Lou, D. Hartill, D. Rice, D. Rubin, and J. Welch, “Permanent Magnet Quadrupoles for CESR Phase-III Upgrade”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P005, pp. 3236-3238.
- S. Banerjee, M. G. Abbott, L. Bobb, and I. Kempf, “Modified Fast Orbit Feedback Controller for Disturbance Attenuation in Long Straights for Diamond-II”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP041, pp. 119-122.
- M. Bai et al., “RHIC Spin Flipper Status and Simulation Studies”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP191, pp. 447-449.
- J. G. Alessi et al., “Design and Performance of the Matching Beamline between the BNL EBIS and an RFQ”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS083, pp. 1844-1846.
- S. Canella and G. Bassato, “Design of a Distributed Control System Based on CORBA and JAVA for a New RIB Facility at LNL”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP002, pp. XX-XX.
- B. Autin, “Dispersion Suppression with Missing Magnets in a FODO Structure - Application to the CERN Antiproton Accumulator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3493-3496.
- P. Orel, E. Janezic, P. L. Lemut, S. Zorzut, S. Hunziker, and V. Schlott, “Test Results of the Libera Sync 3 CW Reference Clock Transfer System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1751-1753.
- C. Potratz, H.-W. Glock, U. van Rienen, and F. Marhauser, “Automatic Pole and Q-Value Extraction for RF Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC098, pp. 2241-2243.
- E. Tanabe, “Breakdown in High-Gradient Accelerator Cavities”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0028, pp. 403-404.
- M.-H. Wang, Y. Cai, R. O. Hettel, Y. Nosochkov, and M. Borland, “Dynamic Aperture and Tolerances for PEP-X Ultimate Storage Ring Design”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC074, pp. 3065-3067.
- R. Tikhoplav, A. Melissinos, N. Barov, and J. Santucci, “Laser Acceleration of Electrons”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI074, pp. 984-985.
- M. C. Alabau Pons, F. Schmidt, R. Tomas, and E. H. Maclean, “Beta-beating in the Effective Model of the LHC Using PTC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC079, pp. 2202-2204.
- F. Tecker et al., “Experimental Study of the Effect of Beam Loading on RF Breakdown Rate in CLIC High-gradient Accelerating Structures”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME054, pp. 1691-1693.
- V. G. Dudnikov and C. M. Ankenbrandt, “Resonant Reaction with a Superintense Circulating Beam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD043, pp. 1497-1499.
- D. Manglunki et al., “Ions for LHC: Performance of the Injector Chain”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS022, pp. 2529-2531.
- P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “Design of a Hybrid Seven-Bend-Achromat Lattice for a High-Energy Diffraction-Limited Storage Ring Using a New Optimization Method”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1528-1531.
- O. Tanaka et al., “Beam Loss Studies for the KEK Compact-ERL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 349-352.
- H. Okuno, S. Fujishima, T. Tominaka, A. Goto, and Y. Yano, “Design and Construction of the Superconducting Bending Magnet for the Injection System of the RIKEN SRC”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P1-04, pp. XX-XX.
- C. I. Clarke et al., “Plasmas, Dielectrics and the Ultrafast: First Science and Operational Experience at FACET”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TH3A04, pp. 802-806.
- Q. Liao et al., “Recent Progress of Proton Acceleration at Peking University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1588-1591.
- R. L. Geng, J. F. Fischer, C. E. Reece, A. V. Reilly, F. S. He, and Y. M. Li, “Pursuing the Origin and Remediation of Low Q0 observed in the Original CEBAF Cryomodules”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2828-2830.
- F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
- F. F. Wu et al., “Design and Calculation of the Stripline Beam Position Monitor for HLS II Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME041, pp. 562-564.
Back to search