Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
[n] S. An, K. Gu, X. J. Liu, J. Q. Wu, and W. Zhang, “Use Interrupt Driven Mode to Redesign an IOC for Digital Power Supply at SSC-LINAC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 98-99. doi:10.18429/JACoW-ICALEPCS2015-MOPGF001
[n] L. Zhao, G. K. Davis, and A. V. Reilly, “Identification and Evaluation of Contamination Sources During Clean Room Preparation of SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB117, pp. 448-451.
[n] E. Syresin et al., “FEL Activity Developed at JINR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE040, pp. 2230-2232.
[n] J. M. Garland, H. L. Owen, D. J. Kelliher, S. Machida, and B. D. Muratori, “Beam Dynamics Observations of Slow Integer Tune Crossing in EMMA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3082-3085. doi:10.18429/JACoW-IPAC2014-THPRO084
[n] M. Schippers et al., “Beam Intensity Stability Of A 250 Mev Sc Cyclotron Equipped With An Internal Cold-Cathode Ion Source”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 300-302.
[n] J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Preparation and Study of Bunches Containing 1011Protons in the Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2037-2040.
[n] S. J. Park, S. C. Cha, J. H. Hwang, D. H. Kim, Y. J. Park, and D. H. Yu, “Beam Loss Suppression by Beam Matching in Klystron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4218-4220. doi:10.18429/JACoW-IPAC2019-THPTS052
[n] P. K. Ambattu et al., “Wakefield Damping for the CLIC Crab Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP006, pp. 815-817.
[n] A. Koschik, B. Goddard, W. H?Âfle, G. Kotzian, D. K. Kramer, and T. Kramer, “Abort Gap Cleaning Using the Transverse Feedback System: Simulation and Measurements in the SPS for the LHC Beam Dump System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP060, pp. 2656-2658.
[n] J. M. Brennan and M. Blaskiewicz, “Stochastic Cooling in RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRI01, pp. 1910-1914.
[n] H. D. Thomsen and S. P. M?©ller, “The Design of the Fast Raster System for the European Spallation Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2118-2120. doi:10.18429/JACoW-IPAC2014-WEPRO072
[n] V. E. Balakin and P. V. Avrakhov, “Superconducting Accelerating Structure with Gradient as 2 Times Higher as TESLA Structure”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP75, pp. 785-787.
[n] R. Eichhorn, J. Conrad, F. Hug, M. Kleinmann, T. Kuerzeder, and S. T. Sievers, “The Upgraded Injector Cryostat-Module and Upcoming Improvements at the S-DALINAC”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO018, pp. 100-102.
[n] G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
[n] X. P. Ding, J. S. Berg, D. B. Cline, and H. G. Kirk, “A Pion Production and Capture System for a 4MW Target Station”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC092, pp. 4272-4274.
[n] R. J. Faehl and W. K. Peter, “Considerations on Collective Ion Acceleration as an Intense Ion Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3500-3503.
[n] C. Hessler, E. Chevallay, S. Doebert, V. Fedosseev, I. Martini, and M. Martyanov, “Recent Results on the Performance of Cs3Sb Photocathodes in the PHIN RF-Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1699-1702. doi:10.18429/JACoW-IPAC2015-TUPJE039
[n] R. Yogi, M. Kumar, M. Sadeghzadeh, M. Bergstrom, A. Sunesson, and M. Kalafatic, “ESS spoke RF power station (400kwp@352mhz) soak testing: issues and mitigations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3593-3595. doi:10.18429/JACoW-IPAC2023-WEPM012
[n] T. G. Jurgens and F. A. Harfoush, “Finite Difference Time Domain Modelling of Particle Accelerators”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 866-869.
[n] M. W. Lin and I. Jovanovic, “3-D Particle-in-cell Simulations for Quasi-phase Matched Direct Laser Electron Acceleration in Density-modulated Plasma Waveguides”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1463-1465. doi:10.18429/JACoW-IPAC2014-TUPME046
[n] R. G. Heine, K. Aulenbacher, and R. Eichhorn, “MESA - Sketch of an Energy Recovery Linac for Nuclear Physics Experiments at Mainz”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR073, pp. 1993-1995.
[n] M. Kuhn, V. Kain, A. Langner, and R. Tomas, “First K-Modulation Measurements in the LHC During Run 2”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 152-155. doi:10.18429/JACoW-IBIC2015-MOPB046
[n] D. A. Kayran et al., “MARS-A Project of the Diffraction Limited Fourth Generation X-Ray Source”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D015, pp. 704-706.
[n] R. A. Jameson, “New Directions in Linear Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEC0001, pp. 237-242.
[n] T. Rinckel, D. V. Baxter, A. Bogdanov, V. P. Derenchuk, W. Reass, and P. E. Sokol, “LENS Proton Linac 6 Kilowatt Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP068, pp. 4932-4934.
[n] O. Mete Apsimon, R. Apsimon, G. Burt, S. Doebert, and G. X. Xia, “S-Band Booster Design and Emittance Preservation for the Awake e-Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 449-451. doi:10.18429/JACoW-LINAC2016-TUPRC016
[n] A. Freyberger, “Large Dynamic Range Beam Profile Measurements”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITMM04, pp. XX-XX.
[n] N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
[n] G. Turemen et al., “Manufacturing and the LLRF Tests of the SANAEM RFQ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 964-967. doi:10.18429/JACoW-IPAC2016-MOPOY051
[n] H. C. Chen et al., “A Gun to Linac Operation Analysis of the Taiwan Light Source Injector”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA052, pp. 2235-2237.
[n] P. Chevtsov, F. Mueller, V. Schlott, D. M. Treyer, P. Peier, and B. Steffen, “Electro Optical Beam Diagnostics System and its Control at PSI”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS019, pp. 195-198.
[n] R. D. Kephart, “Main Linac Issues and Evolving Test Facilities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEZAB03, pp. 1984-1984.
[n] M. C. Lin, L. H. Chang, G. H. Luo, Ch. Wang, and M. K. Yeh, “Effects of Material Properties on Resonance Frequency of a CESR-III Type 500 MHz SRF Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB073, pp. 1371-1373.
[n] M. Hansli et al., “Investigations on High Sensitive Sensor Cavity for Longitudinal and Transversal Schottky for the CR at FAIR”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC077, pp. 1180-1182.
[n] P. Kuske, “Short Bunches at the Transition From Strong to Weak Longitudinal Instability”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3696-3699. doi:10.18429/JACoW-IPAC2017-THPAB007
[n] J. Norem et al., “The Interactions of Surface Damage on RF Cavity Operation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH146, pp. 1361-1363.
[n] D. Horan and E. Cherbak, “An Analog RF Gap Voltage Regulation System for the Advanced Photon Source Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP152, pp. 1019-1021.
[n] A. Tron, “Space Charge Effect in Secondary Electron Monitors”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P062, pp. 2247-2249.
[n] W. Decking et al., “Status of the European XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1721-1723. doi:10.18429/JACoW-IPAC2019-TUPRB020
[n] A. Kanareykin, S. P. Antipov, J. B. Butler, C.-J. Jing, P. Schoessow, and W. Gai, “The Dielectric Wakefield Accelerating Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP119, pp. 319-321.
[n] R. Ferdinand, “The SPIRAL-2 Superconducting Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR2GRI02, pp. 4281-4285.
[n] J. Halbritter, “Electro- or Chemical- Polishing and UHV Baking of Superconducting rf Nb Cavities and Q(H) Dependencies”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO004, pp. 695-697.
[n] S. Sorge, “Simulation Study on Beam Loss in the Alpha Bucket Regime during SIS-100 Proton Operation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3008-3010. doi:10.18429/JACoW-IPAC2014-THPRO059
[n] T. Watanabe, N. Fukunishi, M. Kase, Y. Sasaki, and Y. Yano, “Development of Beam Current Monitor with HTS SQUID and HTS Current Sensor”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-05, pp. 109-113.
[n] L. Monaco et al., “Study of the Evolution of Artificial Defects on the Surface of Niobium During Electrochemical and Chemical Polishing”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB113, pp. 433-437.
[n] G. A. Loew, “Report from the International Linear Collider Technical Review Committee”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPC001, pp. 647-651.
[n] A. V. Aleksandrov, N. S. Dikansky, R. G. Gromov, E. S. Konstantinov, and P. V. Logatchov, “Experimental Study of GaAs Photocathode Performance in RF Gun”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4A04, pp. 1645-1647.
[n] S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1419-1421. doi:10.18429/JACoW-IPAC2014-TUPME030
[n] Ya. V. Getmanov, O. A. Shevchenko, and N. Vinokurov, “Longitudinal Stability of ERL with Two Accelerating RF Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO034, pp. 1509-1511.
[n] S. Eylon, E. Henestroza, W. Fawley, and S. Yu, “Time Dependent Beam Focusing at the DARHT-II Injector Diode”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA22, pp. 1934-1936.
[n] F. Herlach, T. Erber, R. Gearhart, R. McBroom, and J. Murray, “Experiments with Magagauss Targets at SLAC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 809-814.
[n] V. Gupta and G. Mishra, “Three Frequency Undulator Radiation FEL Gain of Betatron Oscillations and Beam Energy Spread”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP071, pp. XX-XX.
[n] A. Variola, “The ThomX Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAA01, pp. 1903-1905.
[n] S. Zarei, F. Abbasi, M. Bahrami, M. Lamehi, and F. Ghasemi, “Construction of the Side-coupled Standing-wave e-Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 151-153. doi:10.18429/JACoW-LINAC2018-MOPO070
[n] C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Linear Microbunching Gain Estimation Including CSR and LSC Impedances in Recirculation Machines”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 34-41. doi:10.18429/JACoW-ERL2015-TUICLH2034
[n] T. Ieiri, K. Akai, M. Tawada, and M. Tobiyama, “Variations in Beam Phase and Related Issues Observed in KEKB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP046, pp. 2595-2597.
[n] C. Pardine, R. H. A. Farias, and P. F. Tavares, “Commissioning of the 2,2 kW, 476 MHz Solid State RF Power Source for the LNLS Booster Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD029, pp. 511-513.
[n] E. W. Blackmore, “In Memorium: Mike Craddock”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 11-15. doi:10.18429/JACoW-Cyclotrons2016-MOBS02
[n] F.-J. Boergermann, “Improvements in Production of Magnets and Pole Pieces for Undulators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1415-1417. doi:10.18429/JACoW-IPAC2017-TUPAB041
[n] D. Wang, J. Gao, P. Bambade, and T. Naito, “Analytical Estimation of ATF Beam Halo Distribution”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3888-3890. doi:10.18429/JACoW-IPAC2016-THPOR045
[n] J. Guyard and M. Weiss, “Use of Beam Emittance Measurements in Matching Problems”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper E02, pp. 254-258.
[n] S. L. Smith and L. A. Welbourne, “Bump Compensation and System Error Detection using a Microsoft EXCEL Spread Sheet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1024-1027.
[n] J. X. Fang and C. E. Chen, “An Integral Spilt-Ring Resonator Loaded with Drift Tubes and RF Quadrupoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2891-2894.
[n] M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Development and Application of the Trigger Timing Watchdog System in KEK Electron/Positron Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME017, pp. 2962-2964.
[n] H. J. Kim and T. Sen, “Beam-Beam Compensation Using Electron Lens in RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP032, pp. 2561-2563.
[n] J. Hao, D. Reschke, A. Brinkmann, and L. Lilje, “Low Temperature Heat Treatment Effect on High-Field EP Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP16, pp. 66-69.
[n] P. Hurh, J. Morgan, and S. Tariq, “Comprehensive Electro-Magnetic, Thermal, and Structural Finite Element Analysis of the Lithium Collection Lens at the FNAL Antiproton Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB011, pp. 641-643.
For LaTeX
Use Complete Form
For BibTeX
References
- T. F. Günzel, “Transverse Instability Studies at the ALBA Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS065, pp. 751-753.
- S. An, K. Gu, X. J. Liu, J. Q. Wu, and W. Zhang, “Use Interrupt Driven Mode to Redesign an IOC for Digital Power Supply at SSC-LINAC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 98-99.
- L. Zhao, G. K. Davis, and A. V. Reilly, “Identification and Evaluation of Contamination Sources During Clean Room Preparation of SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB117, pp. 448-451.
- E. Syresin et al., “FEL Activity Developed at JINR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE040, pp. 2230-2232.
- J. M. Garland, H. L. Owen, D. J. Kelliher, S. Machida, and B. D. Muratori, “Beam Dynamics Observations of Slow Integer Tune Crossing in EMMA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3082-3085.
- M. Schippers et al., “Beam Intensity Stability Of A 250 Mev Sc Cyclotron Equipped With An Internal Cold-Cathode Ion Source”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 300-302.
- J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Preparation and Study of Bunches Containing 1011Protons in the Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2037-2040.
- S. J. Park, S. C. Cha, J. H. Hwang, D. H. Kim, Y. J. Park, and D. H. Yu, “Beam Loss Suppression by Beam Matching in Klystron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4218-4220.
- P. K. Ambattu et al., “Wakefield Damping for the CLIC Crab Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP006, pp. 815-817.
- A. Koschik, B. Goddard, W. H?Âfle, G. Kotzian, D. K. Kramer, and T. Kramer, “Abort Gap Cleaning Using the Transverse Feedback System: Simulation and Measurements in the SPS for the LHC Beam Dump System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP060, pp. 2656-2658.
- J. M. Brennan and M. Blaskiewicz, “Stochastic Cooling in RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3GRI01, pp. 1910-1914.
- H. D. Thomsen and S. P. M?©ller, “The Design of the Fast Raster System for the European Spallation Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2118-2120.
- V. E. Balakin and P. V. Avrakhov, “Superconducting Accelerating Structure with Gradient as 2 Times Higher as TESLA Structure”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP75, pp. 785-787.
- R. Eichhorn, J. Conrad, F. Hug, M. Kleinmann, T. Kuerzeder, and S. T. Sievers, “The Upgraded Injector Cryostat-Module and Upcoming Improvements at the S-DALINAC”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO018, pp. 100-102.
- G. Patel, D. E. Anderson, D. J. Solley, and M. Wezensky, “Droop Compensation for the High Voltage Converter Modulators at the Spallation Neutron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD081, pp. 3704-3706.
- X. P. Ding, J. S. Berg, D. B. Cline, and H. G. Kirk, “A Pion Production and Capture System for a 4MW Target Station”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC092, pp. 4272-4274.
- R. J. Faehl and W. K. Peter, “Considerations on Collective Ion Acceleration as an Intense Ion Injector”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3500-3503.
- C. Hessler, E. Chevallay, S. Doebert, V. Fedosseev, I. Martini, and M. Martyanov, “Recent Results on the Performance of Cs3Sb Photocathodes in the PHIN RF-Gun”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1699-1702.
- R. Yogi, M. Kumar, M. Sadeghzadeh, M. Bergstrom, A. Sunesson, and M. Kalafatic, “ESS spoke RF power station (400kwp@352mhz) soak testing: issues and mitigations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM012, pp. 3593-3595.
- T. G. Jurgens and F. A. Harfoush, “Finite Difference Time Domain Modelling of Particle Accelerators”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 866-869.
- M. W. Lin and I. Jovanovic, “3-D Particle-in-cell Simulations for Quasi-phase Matched Direct Laser Electron Acceleration in Density-modulated Plasma Waveguides”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1463-1465.
- R. G. Heine, K. Aulenbacher, and R. Eichhorn, “MESA - Sketch of an Energy Recovery Linac for Nuclear Physics Experiments at Mainz”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR073, pp. 1993-1995.
- M. Kuhn, V. Kain, A. Langner, and R. Tomas, “First K-Modulation Measurements in the LHC During Run 2”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 152-155.
- D. A. Kayran et al., “MARS-A Project of the Diffraction Limited Fourth Generation X-Ray Source”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D015, pp. 704-706.
- R. A. Jameson, “New Directions in Linear Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WEC0001, pp. 237-242.
- T. Rinckel, D. V. Baxter, A. Bogdanov, V. P. Derenchuk, W. Reass, and P. E. Sokol, “LENS Proton Linac 6 Kilowatt Operation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP068, pp. 4932-4934.
- O. Mete Apsimon, R. Apsimon, G. Burt, S. Doebert, and G. X. Xia, “S-Band Booster Design and Emittance Preservation for the Awake e-Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 449-451.
- A. Freyberger, “Large Dynamic Range Beam Profile Measurements”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITMM04, pp. XX-XX.
- N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
- G. Turemen et al., “Manufacturing and the LLRF Tests of the SANAEM RFQ”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 964-967.
- H. C. Chen et al., “A Gun to Linac Operation Analysis of the Taiwan Light Source Injector”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA052, pp. 2235-2237.
- P. Chevtsov, F. Mueller, V. Schlott, D. M. Treyer, P. Peier, and B. Steffen, “Electro Optical Beam Diagnostics System and its Control at PSI”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKS019, pp. 195-198.
- R. D. Kephart, “Main Linac Issues and Evolving Test Facilities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEZAB03, pp. 1984-1984.
- M. C. Lin, L. H. Chang, G. H. Luo, Ch. Wang, and M. K. Yeh, “Effects of Material Properties on Resonance Frequency of a CESR-III Type 500 MHz SRF Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB073, pp. 1371-1373.
- M. Hansli et al., “Investigations on High Sensitive Sensor Cavity for Longitudinal and Transversal Schottky for the CR at FAIR”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC077, pp. 1180-1182.
- P. Kuske, “Short Bunches at the Transition From Strong to Weak Longitudinal Instability”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3696-3699.
- J. Norem et al., “The Interactions of Surface Damage on RF Cavity Operation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH146, pp. 1361-1363.
- D. Horan and E. Cherbak, “An Analog RF Gap Voltage Regulation System for the Advanced Photon Source Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP152, pp. 1019-1021.
- A. Tron, “Space Charge Effect in Secondary Electron Monitors”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P062, pp. 2247-2249.
- W. Decking et al., “Status of the European XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1721-1723.
- A. Kanareykin, S. P. Antipov, J. B. Butler, C.-J. Jing, P. Schoessow, and W. Gai, “The Dielectric Wakefield Accelerating Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP119, pp. 319-321.
- R. Ferdinand, “The SPIRAL-2 Superconducting Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR2GRI02, pp. 4281-4285.
- J. Halbritter, “Electro- or Chemical- Polishing and UHV Baking of Superconducting rf Nb Cavities and Q(H) Dependencies”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO004, pp. 695-697.
- S. Sorge, “Simulation Study on Beam Loss in the Alpha Bucket Regime during SIS-100 Proton Operation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3008-3010.
- T. Watanabe, N. Fukunishi, M. Kase, Y. Sasaki, and Y. Yano, “Development of Beam Current Monitor with HTS SQUID and HTS Current Sensor”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper WE-05, pp. 109-113.
- L. Monaco et al., “Study of the Evolution of Artificial Defects on the Surface of Niobium During Electrochemical and Chemical Polishing”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB113, pp. 433-437.
- G. A. Loew, “Report from the International Linear Collider Technical Review Committee”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPC001, pp. 647-651.
- A. V. Aleksandrov, N. S. Dikansky, R. G. Gromov, E. S. Konstantinov, and P. V. Logatchov, “Experimental Study of GaAs Photocathode Performance in RF Gun”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4A04, pp. 1645-1647.
- S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1419-1421.
- Ya. V. Getmanov, O. A. Shevchenko, and N. Vinokurov, “Longitudinal Stability of ERL with Two Accelerating RF Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO034, pp. 1509-1511.
- S. Eylon, E. Henestroza, W. Fawley, and S. Yu, “Time Dependent Beam Focusing at the DARHT-II Injector Diode”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA22, pp. 1934-1936.
- F. Herlach, T. Erber, R. Gearhart, R. McBroom, and J. Murray, “Experiments with Magagauss Targets at SLAC”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 809-814.
- V. Gupta and G. Mishra, “Three Frequency Undulator Radiation FEL Gain of Betatron Oscillations and Beam Energy Spread”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP071, pp. XX-XX.
- A. Variola, “The ThomX Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEOAA01, pp. 1903-1905.
- S. Zarei, F. Abbasi, M. Bahrami, M. Lamehi, and F. Ghasemi, “Construction of the Side-coupled Standing-wave e-Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 151-153.
- C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “Linear Microbunching Gain Estimation Including CSR and LSC Impedances in Recirculation Machines”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 34-41.
- T. Ieiri, K. Akai, M. Tawada, and M. Tobiyama, “Variations in Beam Phase and Related Issues Observed in KEKB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP046, pp. 2595-2597.
- C. Pardine, R. H. A. Farias, and P. F. Tavares, “Commissioning of the 2,2 kW, 476 MHz Solid State RF Power Source for the LNLS Booster Synchrotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD029, pp. 511-513.
- E. W. Blackmore, “In Memorium: Mike Craddock”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 11-15.
- F.-J. Boergermann, “Improvements in Production of Magnets and Pole Pieces for Undulators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1415-1417.
- D. Wang, J. Gao, P. Bambade, and T. Naito, “Analytical Estimation of ATF Beam Halo Distribution”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3888-3890.
- J. Guyard and M. Weiss, “Use of Beam Emittance Measurements in Matching Problems”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper E02, pp. 254-258.
- S. L. Smith and L. A. Welbourne, “Bump Compensation and System Error Detection using a Microsoft EXCEL Spread Sheet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1024-1027.
- J. X. Fang and C. E. Chen, “An Integral Spilt-Ring Resonator Loaded with Drift Tubes and RF Quadrupoles”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2891-2894.
- M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Development and Application of the Trigger Timing Watchdog System in KEK Electron/Positron Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME017, pp. 2962-2964.
- H. J. Kim and T. Sen, “Beam-Beam Compensation Using Electron Lens in RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP032, pp. 2561-2563.
- J. Hao, D. Reschke, A. Brinkmann, and L. Lilje, “Low Temperature Heat Treatment Effect on High-Field EP Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP16, pp. 66-69.
- P. Hurh, J. Morgan, and S. Tariq, “Comprehensive Electro-Magnetic, Thermal, and Structural Finite Element Analysis of the Lithium Collection Lens at the FNAL Antiproton Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB011, pp. 641-643.
Back to search