Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. B. Scheidt, “Measurement of Vertical Emittance with a system of Six -In-Air-X-Ray- Projection Monitors at the ESRF”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB08, pp. 72-74.
[n] P. Bricault, “A 500 MeV-100µA Proton Target for the ISAC Radioactive Ion Beam Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODR4, pp. 100-102.
[n] M. Pieck et al., “Recent Enhancements to the Los Alamos Isotope Production Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 548-552. doi:10.18429/JACoW-ICALEPCS2017-TUPHA065
[n] G. Cheng et al., “Magnetic Hygiene Control on LCLS-II Cryomodules Fabricated at JLab”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 153-157. doi:10.18429/JACoW-SRF2017-MOPB044
[n] M.Biagini, “The SuperB Accelerator: Overview and Lattice studies”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH02, pp. XX-XX.
[n] R. Kersevan, “Synchrotron Radiation Distribution and Related Outgassing and Pressure Profiles for the HL-LHC Final Focus Magnets”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3127-3130. doi:10.18429/JACoW-IPAC2015-WEPHA012
[n] H. Loos, T. Borden, P. Emma, J. C. Frisch, and J. Wu, “Relative Bunch Length Monitor for the Linac Coherent Light Source (LCLS) using Coherent Edge Radiation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS071, pp. 4189-4191.
[n] G. LeBlanc and W. Stiefler, “Alignment Procedures for the MAX-II Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP089G, pp. 2606-2608.
[n] S. Ellis, “SNS SRF Time Dependent Cavity RF Resonance Shift due to Lorentz Force Induced Mechanical Excitation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH140, pp. 1107-1109.
[n] G. Kim, D. May, P. McIntyre, and A. Sattarov, “A Superconduction Isochronous Cyclotron Stack as a Driver for a Thorium-Cycle Power Reactor”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper L-5, pp. XX-XX.
[n] A. Miura and H. Matsumoto, “Development of an S-Band High-Power Pillbox-Type RF Window”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-30, pp. 124-126.
[n] U. Niedermayer and O. Boine-Frankenheim, “Beam Coupling Impedance Simulation in the Frequency Domain for the SIS100 Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1665-1667. doi:10.18429/JACoW-IPAC2014-TUPRI045
[n] G. Marcus et al., “Longitudinal Diagnostic for Single-Spike SASE FEL Operation”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH018, pp. 274-277.
[n] H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
[n] Y. Tang, C. Ekdahl, T. C. Genoni, T. P. Hughes, and M. E. Schulze, “Implementation of Spread Mass Model of Ion Hose Instability in Lamda”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN082, pp. 3408-3410.
[n] B. Joly, U. Weinrich, and G. A. Naylor The European Synchrotron Radiation Facility, “Beam Loss Monitors at the ESRF”, in Proc. DIPAC'99, Chester, UK, May 1999, paper IT03, pp. XX-XX.
[n] J. T. Maniscalco, D. L. Hall, and M. Liepe, “RF Performance Studies of Thin-Film Superconductors Using a Sample Host Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3462-3463. doi:10.18429/JACoW-IPAC2015-WEPTY076
[n] B. A. Allen, C. Huang, T. C. Katsouleas, P. Muggli, and V. Yakimenko, “Simulation Results of Current Filamentation Instability Generated from PWFA Electron Beam”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP096, pp. 4764-4766.
[n] R. O. Hettel, “Challenges in the Design of Diffraction-limited Storage Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 7-11. doi:10.18429/JACoW-IPAC2014-MOXBA01
[n] A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB016, pp. 41-43.
[n] J. F. Orrett, S. R. Buckley, P. A. Corlett, A. J. Moss, and S. Rains, “IOT Testing at the ERLP”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH153, pp. 1382-1384.
[n] A. Jackson, E. Forest, H. Nishimura, and M. S. Zisman, “The Effects of Insertion Devices on Beam Dynamics in the ALS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1752-1755.
[n] X. Huang, S.-Y. Lee, and K. Y. Ng, “Emittance Measurement and Modeling for the Fermilab Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUZAAB03, pp. 799-803.
[n] H. C. Li, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, T. F. Lin, and H. H. Tsai, “The Application of 400KW DC Bank for Cryogenic System at NSRRC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP217, pp. 1217-1219.
[n] C. Montag et al., “eRHIC Electron Ring Design Status”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 794-796. doi:10.18429/JACoW-IPAC2019-MOPRB093
[n] A. Bacci et al., “Advanced Beam Dynamics Experiments at SPARC”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THOB2, pp. 451-454.
[n] J. L. Abelleira, A. Seryi, R. B. Appleby, H. Rafique, and M. I. Besana, “Cross-Talk Studies between FCC-hh Experimental Interaction Regions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2136-2138. doi:10.18429/JACoW-IPAC2017-TUPVA036
[n] M. T. Li, Y. W. An, S. Y. Xu, and T. G. Xu, “Longitudinal Tomography for Analysing the Longitudinal Phase Space Distribution in RCS of CSNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 639-642. doi:10.18429/JACoW-IPAC2019-MOPRB029
[n] K. T. McDonald, V. B. Graves, H. G. Kirk, N. Souchlas, and R. J. Weggel, “Energy Deposition in the Target System of a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3979-3981. doi:10.18429/JACoW-IPAC2014-THPRI088
[n] D. B?Âhne, “The Unilac, Development and Present Status”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper A01, pp. 2-11.
[n] E. G. Krastelev, G. V. Ivanenkov, A. G. Mozgovoy, and M. Yu. Solovyev, “Experimental Investigation of POS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1079-1082.
[n] W. Bartmann et al., “New PSB H- Injection and 2 GeV Transfer to the CERN PS”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO4AB02, pp. 320-324.
[n] K. N. Nii et al., “Nb Single-cell Cavity Vertical Electro-polishing with Ninja Cathode and Evaluation of its Accelerating Gradient”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 612-615. doi:10.18429/JACoW-SRF2017-TUPB093
[n] E. Plawski, A. Kucharczyk, and S. Kulinski, “The Technical Realisation of RF Kickers for CLIC Test Facility CTF3”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB029, pp. 2787-2789.
[n] T. Limberg, J. T. Seeman, and W. L. Spence, “Effects and Tolerances of Injection Jitter in the SLC and Future Linear Colliders”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1506-1509.
[n] A. Gresele, M. Giaretta, A. Visentin, A. A. Sulimov, and J. H. Thie, “The Statistics of Industrial XFEL Cavities Fabrication at E.ZANON”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB023, pp. 1119-1121.
[n] N. Galindo Munoz, N. Catalan-Lasheras, A. Grudiev, V. E. Boria, and A. Faus-Golfe, “Pre-alignment of Accelerating Structures for Compact Acceleration and High Gradient using In-situ Radiofrequency Methods”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2696-2699. doi:10.18429/JACoW-IPAC2016-WEPOR016
[n] S. Soykarci, D. L??tzenkirchen-Hecht, V. Porshyn, and P. Serbun, “Influence of Argon-Ion Irradiation on Field Emission from Polycrystalline Cu and Large-Grain NB Surfaces”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2384-2386. doi:10.18429/JACoW-IPAC2018-WEPMF009
[n] S. Sasaki, T. T. Nakamura, and M. Hirose, “Monitoring System for IT Infrastructure and EPICS Control System at SuperKEKB”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1417. doi:10.18429/JACoW-ICALEPCS2019-WEPHA134
[n] B. E. Carlsten, “Photoelectric Injector Design Code”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 313-316.
[n] H. C. Liu et al., “High Power Conditioning of the DTL-1 for CSNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4207-4209. doi:10.18429/JACoW-IPAC2017-THPIK049
[n] S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
[n] W. Zhang, A. V. Soukas, and S. Y. Zhang, “Transient Analysis of the AGS-Booster Ring Dipole and Qudrupole Magnet System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 940-943.
[n] B. Hafizi, J. Penano, and P. Sprangle, “Lethargy in an Optically Guided FEL Amplifier”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH039, pp. XX-XX.
[n] N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
[n] N. Tokuda and S. Yamada, “New Formulation of the RFQ Radial Matching Section”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H18, pp. 313-315.
[n] H. von Jagwitz-Biegnitz, P. Beasley, O. Heid, D. C. Faircloth, A. J. Holmes, and R. G. Selway, “2D Wire Grid Integrated with Faraday Cup for Low Energy H- Beam Analysis at Siemens Novel Electrostatic Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF06, pp. 507-510.
[n] J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
[n] G. Penco, S. M. Lidia, and M. Trovo, “Ramping Longitudinal Distribution Studies for the FERMI@ELETTRA Injector”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH027, pp. 621-624.
[n] A. O. Borga et al., “The MicroTCA Acquisition and Processing Back-end for FERMI@Elettra Diagnostics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEBHMUST01, pp. 634-637.
[n] L. Torino and U. Iriso, “Beam Shape Reconstruction Using Synchrotron Radiation Interferometry”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 589-592. doi:10.18429/JACoW-IBIC2016-WEBL03
[n] C. Eckardt et al., “Polarimetry of 0.1 ÔÇô 130 MeV Electron Beams at the S-DALINAC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD89, pp. 515-517.
[n] D. W. Storm et al., “Nevis Synchrocyclotron Beam Status Report”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1408-1411.
[n] D. Trbojevic and V. S. Morozov, “Innovative Superconducting Non Scaling Fixed Field Alternating Gradient Isocentric Gantry for Carbon Cancer Therapy”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS029, pp. 2544-2546.
[n] M. K. Bock et al., “Benchmarking the Performance of the Present Bunch Arrival Time Monitors at FLASH”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD28, pp. 365-367.
[n] T. Tran Ngoc and R. M. Hutcheon, “Study of High-Strength Coppers for RFQ1's New Vanes”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO403, pp. 45-47.
[n] M. L. Rossi, A. J. Favale, F. J. Lotito, and F. R. Swanson, “A Wide Area Electron Beam Scanner”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 279-282.
[n] N. Yu. Kazarinov, “Coupling Resonance Qx-Qy=0 and Its Correction in Axial Injection Channel of the Cyclotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP100, pp. 5014-5016.
[n] K. Pieterman, J. A. M. Dam, C. Commeaux, and C. Penco, “Low Temperature Tests of the AGOR Superconducting Coil System”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XB-01, pp. 557-560.
[n] A. Ropert, “Lifetime Modelling at APS and ESRF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP29, pp. 2328-2330.
[n] Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Low Energy Positron Storage Ring for Positronium Generation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP07B, pp. 853-855.
[n] F. Wolfheimer, E. Gjonaj, and T. Weiland, “Parallel Particle-In-Cell (OIC) Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM1MP02, pp. 290-295.
[n] J. Steimel, R. L. Madrak, R. J. Pasquinelli, E. Peoples-Evans, R. C. Webber, and D. Wildman, “Status and Specifications of a Project X Front-End Accelerator Test Facility at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEOBS6, pp. 1430-1432.
[n] I. Roth, N. Butler, M. P. J. Gaudreau, and M. K. Kempkes, “Robust High-average-power Modulator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA067, pp. 834-836.
[n] C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995.
[n] A. Orzhekhovskaya et al., “An Ion Beam Matching to a Linac Accelerating-focusing Channel”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS028, pp. 661-663.
[n] M. W. Lin and I. Jovanovic, “Modeling of Quasi-phase Matching in an Aperiodic Corrugated Plasma Waveguide for High-efficiency Direct Laser Electron Acceleration”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP014, pp. 2750-2752.
[n] T. Fowler, J. C. Freze, D. Grier, K-D. Metzmacher, and L. Sermeus, “Kickers Used for Bunched e?e- Beam Transfer in the CERN PS Complex”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 408-411.
[n] X. Zhou, T. Natsui, Y. Ogawa, M. Yoshida, and R. Zhang, “Developing an Yb/Nd Doped Hybrid Solid Laser of RF Gun for SuperKEKB Phase II Commissioning”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4540-4543. doi:10.18429/JACoW-IPAC2017-THPVA047
[n] N. Nishimori, R. Hajima, R. Nagai, and M. Sawamura, “Development of a Multialkali Photocathode DC Gun for High Current Operation”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 29-32. doi:10.18429/JACoW-ERL2017-MOPSPP015
[n] P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
[n] Y. H. Xu, Z. H. Sun, D. V. Campen, W. J. Corbett, C. L. Li, and W. J. Zhang, “Time Response of a Gridded X-ray Beam Ionization Chamber”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4220-4222. doi:10.18429/JACoW-IPAC2016-THPOY050
[n] R. Parodi, P. Fabbricatore, G. Gemme, and R. Musenich, “Microwave Performances of Two Cavities Fully Coated by YBCO”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I29, pp. XX-XX.
[n] B. Faatz, “Results and Lessons from FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOBAU02, pp. XX-XX.
[n] A. Lasheen, T. Argyropoulos, J. Repond, and E. N. Shaposhnikova, “Effect of the Various Impedances on Longitudinal Beam Stability in the CERN SPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1666-1669. doi:10.18429/JACoW-IPAC2016-TUPOR008
[n] M. Takao, J. Schimizu, Y. Shimosaki, and K. Soutome, “Impact of Nonlinear Resonances on Beam Dynamics at the SPring-8 Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC069, pp. 2181-2183.
[n] S. Golge and B. Vlahovic, “REVIEWOF LOW-ENERGY POSITRON BEAM FACILITIES”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD025, pp. 1464-1466.
[n] L. C. Steinhauer, W. D. Kimura, and R. D. Romea, “A New Look at Inverse Cerenkov Acceleration and Vacuum Laser Acceleration”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 558-561.
[n] Y. Morita et al., “Upgrading magnet power supply system in J-PARC main ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3762-3765. doi:10.18429/JACoW-IPAC2023-WEPM082
[n] E. G. Souza, A. Endler, R. Pakter, and F. B. Rizzato, “An Analytical Lagrangian Model for Analyzing Temperature Effects in Intense Non-neutral Beams”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS023, pp. 646-648.
[n] E. M. Ivanov and G. A. Riabov, “Experimental Determination of the External Beam Matrix on 1 GeV Synchrocyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-25, pp. 243-245.
[n] J. Schwartz, “Next Generation Superconductors for Accelerator Magnets”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRYKI02, pp. 3750-3750.
[n] W. Xu et al., “Design, Simulation and Conditioning of the Fundamental Power Couplers for BNL SRF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC114, pp. 2489-2491.
[n] K. Seiya, S. Chaurize, C. C. Drennan, W. Pellico, A. K. Triplett, and A. M. Waller, “Development of Cogging at the Fermilab Booster”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2109-2111. doi:10.18429/JACoW-IPAC2014-WEPRO069
[n] X. P. Ding, H. G. Kirk, K. T. McDonald, C. T. Rogers, P. Snopok, and N. Souchlas, “Energy Deposition in Magnets and Shielding of the Target System of a Staged Neutrino Factory”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA10, pp. 1376-1378.
[n] D. Kostin et al., “S1-Global Module Tests at STF/KEK”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOODA02, pp. 38-40.
[n] T. Morishita, H. Asano, K. Hasegawa, M. Ikegami, and A. Ueno, “The Precise Survey and the Alignment Results of the J-PARC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN059, pp. 1520-1522.
[n] M. Cavenago et al., “A RFQ Cooler Development”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3627-3630. doi:10.18429/JACoW-IPAC2018-THPAL008
[n] M. Popovic et al., “Compact, Tunable RF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP105, pp. 802-804.
[n] J. Pfingstner, A. Latina, and D. Schulte, “Imperfection Tolerances for On-line Dispersion Free Steering in the Main Linac of CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME048, pp. 1673-1675.
[n] S. P. Kapitza, “Synchrotron Radiation Sources in the Soviet Union”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 405-409.
[n] V. A. Papadichev, “Accelerating and Transporting Attosecond and Femtosecond Bunches of Electrons”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP137, pp. 2815-2817.
[n] J.-G. Wang, N. Tsoupas, and M. Venturini, “3D Simulation Studies of SNS Ring Doublet Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT072, pp. 3865-3867.
[n] D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 112-115.
[n] H. Kuboki, J. Takano, M. Tejima, T. Toyama, and S. Hatakeyama, “Beam Based Gain Calibration for Beam Position Monitor at J-PARC Main Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 927-929. doi:10.18429/JACoW-IPAC2015-MOPHA058
[n] J. Rossbach, “Short Wavelength SASE FEL: Experiment vs. Theory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZBAB02, pp. 94-98.
[n] S. N. Twum et al., “Implementing an Event Tracing Solution with Consistently Formatted Logs for the SKA Telescope Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 311-316. doi:10.18429/JACoW-ICALEPCS2021-TUBL02
[n] G. Stancari, G. Annala, T. R. Johnson, D. A. Still, and A. Valishev, “Measurements of Transverse Beam Diffusion Rates in the Fermilab Tevatron Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ033, pp. 1882-1884.
[n] P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
[n] Y. Yan, C. Wang, Z. Wang, L. Zhao, and Y. Zhu, “The Beamline Experiments Scheduling Software”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL003, pp. 33-35.
[n] S. I. Baker, E. F. Moore, R. C. Pardo, and G. Savard, “Fission Fragment Ion Source Radiation Protection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP093, pp. 3669-3671.
[n] A. V. Mishin, “Design and Application of Microwave Structures for Low Velocity Particles”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP62, pp. 812-814.
[n] M. F. Fernandes et al., “A Cryogenic Current Comparator for the Low-Energy Antiproton Facilities at CERN”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 143-147. doi:10.18429/JACoW-IBIC2015-MOPB043
[n] M. BastaniNejad et al., “Field Emission Measurements from Niobium Electrodes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP287, pp. 2020-2022.
[n] H. Schlarb, C. Gerth, W. Koprek, F. Loehl, and E. Vogel, “Beam Based Measurements of RF Phase and Amplitude Stability at FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC01, pp. 307-309.
[n] S. Takahashi, T. Shintake, T. Saeki, K. Onoe, and T. Inagaki, “Precise Temperature Regulation System for C-Band Accelerating Structure”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16051, pp. XX-XX.
[n] Y. Zhang and J. Qiang, “Simulation Studies of Beam-Beam Effects of a Ring-Ring Electron-Ion Collider Based on CEBAF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP067, pp. 2653-2655.
[n] D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
[n] V. M. Rybin, “Analysis, Choice and Design of Monitors for Beam Diagnostics”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP61, pp. 485-486.
[n] W. K. H. Panofsky, “The Stanford Recirculating Linear Accelerator”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G04, pp. 175-181.
[n] P. Duval, H. Wu, and J. Bobnar, “Common Device Interface 2.0”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO207, pp. 144-146.
[n] E. N. Zaplatin, “Project X Elliptical Cavity Structural Analyses”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP031, pp. 868-870.
[n] J. M. Dolique and J.-C. Coacolo, “Self-field-limiting Current Density in the Field-photoemission of Intense Short Relativistic Electron”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 771-774.
[n] G. Neil, “Energy Recovery Linacs for Light Source Applications”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCS1, pp. 761-765.
[n] R. J. Yarema, “A Four Quadrant Magnet Power Supply for Superconducting and Conventional Accelerator Applications”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2809-2812.
For LaTeX
Use Complete Form
For BibTeX
References
- K. B. Scheidt, “Measurement of Vertical Emittance with a system of Six -In-Air-X-Ray- Projection Monitors at the ESRF”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB08, pp. 72-74.
- P. Bricault, “A 500 MeV-100µA Proton Target for the ISAC Radioactive Ion Beam Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODR4, pp. 100-102.
- M. Pieck et al., “Recent Enhancements to the Los Alamos Isotope Production Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 548-552.
- G. Cheng et al., “Magnetic Hygiene Control on LCLS-II Cryomodules Fabricated at JLab”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 153-157.
- M.Biagini, “The SuperB Accelerator: Overview and Lattice studies”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper WEACH02, pp. XX-XX.
- R. Kersevan, “Synchrotron Radiation Distribution and Related Outgassing and Pressure Profiles for the HL-LHC Final Focus Magnets”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3127-3130.
- H. Loos, T. Borden, P. Emma, J. C. Frisch, and J. Wu, “Relative Bunch Length Monitor for the Linac Coherent Light Source (LCLS) using Coherent Edge Radiation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS071, pp. 4189-4191.
- G. LeBlanc and W. Stiefler, “Alignment Procedures for the MAX-II Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP089G, pp. 2606-2608.
- S. Ellis, “SNS SRF Time Dependent Cavity RF Resonance Shift due to Lorentz Force Induced Mechanical Excitation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH140, pp. 1107-1109.
- G. Kim, D. May, P. McIntyre, and A. Sattarov, “A Superconduction Isochronous Cyclotron Stack as a Driver for a Thorium-Cycle Power Reactor”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper L-5, pp. XX-XX.
- A. Miura and H. Matsumoto, “Development of an S-Band High-Power Pillbox-Type RF Window”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-30, pp. 124-126.
- U. Niedermayer and O. Boine-Frankenheim, “Beam Coupling Impedance Simulation in the Frequency Domain for the SIS100 Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1665-1667.
- G. Marcus et al., “Longitudinal Diagnostic for Single-Spike SASE FEL Operation”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH018, pp. 274-277.
- H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
- Y. Tang, C. Ekdahl, T. C. Genoni, T. P. Hughes, and M. E. Schulze, “Implementation of Spread Mass Model of Ion Hose Instability in Lamda”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN082, pp. 3408-3410.
- B. Joly, U. Weinrich, and G. A. Naylor The European Synchrotron Radiation Facility, “Beam Loss Monitors at the ESRF”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper IT03, pp. XX-XX.
- J. T. Maniscalco, D. L. Hall, and M. Liepe, “RF Performance Studies of Thin-Film Superconductors Using a Sample Host Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3462-3463.
- B. A. Allen, C. Huang, T. C. Katsouleas, P. Muggli, and V. Yakimenko, “Simulation Results of Current Filamentation Instability Generated from PWFA Electron Beam”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP096, pp. 4764-4766.
- R. O. Hettel, “Challenges in the Design of Diffraction-limited Storage Rings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 7-11.
- A. Kolomiets and A. S. Plastun, “RFQ With Improved Energy Gain”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB016, pp. 41-43.
- J. F. Orrett, S. R. Buckley, P. A. Corlett, A. J. Moss, and S. Rains, “IOT Testing at the ERLP”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH153, pp. 1382-1384.
- A. Jackson, E. Forest, H. Nishimura, and M. S. Zisman, “The Effects of Insertion Devices on Beam Dynamics in the ALS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1752-1755.
- X. Huang, S.-Y. Lee, and K. Y. Ng, “Emittance Measurement and Modeling for the Fermilab Booster”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUZAAB03, pp. 799-803.
- H. C. Li, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, T. F. Lin, and H. H. Tsai, “The Application of 400KW DC Bank for Cryogenic System at NSRRC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP217, pp. 1217-1219.
- C. Montag et al., “eRHIC Electron Ring Design Status”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 794-796.
- A. Bacci et al., “Advanced Beam Dynamics Experiments at SPARC”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THOB2, pp. 451-454.
- J. L. Abelleira, A. Seryi, R. B. Appleby, H. Rafique, and M. I. Besana, “Cross-Talk Studies between FCC-hh Experimental Interaction Regions”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2136-2138.
- M. T. Li, Y. W. An, S. Y. Xu, and T. G. Xu, “Longitudinal Tomography for Analysing the Longitudinal Phase Space Distribution in RCS of CSNS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 639-642.
- K. T. McDonald, V. B. Graves, H. G. Kirk, N. Souchlas, and R. J. Weggel, “Energy Deposition in the Target System of a Muon Collider/Neutrino Factory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3979-3981.
- D. B?Âhne, “The Unilac, Development and Present Status”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper A01, pp. 2-11.
- E. G. Krastelev, G. V. Ivanenkov, A. G. Mozgovoy, and M. Yu. Solovyev, “Experimental Investigation of POS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1079-1082.
- W. Bartmann et al., “New PSB H- Injection and 2 GeV Transfer to the CERN PS”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO4AB02, pp. 320-324.
- K. N. Nii et al., “Nb Single-cell Cavity Vertical Electro-polishing with Ninja Cathode and Evaluation of its Accelerating Gradient”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 612-615.
- E. Plawski, A. Kucharczyk, and S. Kulinski, “The Technical Realisation of RF Kickers for CLIC Test Facility CTF3”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB029, pp. 2787-2789.
- T. Limberg, J. T. Seeman, and W. L. Spence, “Effects and Tolerances of Injection Jitter in the SLC and Future Linear Colliders”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1506-1509.
- A. Gresele, M. Giaretta, A. Visentin, A. A. Sulimov, and J. H. Thie, “The Statistics of Industrial XFEL Cavities Fabrication at E.ZANON”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB023, pp. 1119-1121.
- N. Galindo Munoz, N. Catalan-Lasheras, A. Grudiev, V. E. Boria, and A. Faus-Golfe, “Pre-alignment of Accelerating Structures for Compact Acceleration and High Gradient using In-situ Radiofrequency Methods”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2696-2699.
- S. Soykarci, D. L??tzenkirchen-Hecht, V. Porshyn, and P. Serbun, “Influence of Argon-Ion Irradiation on Field Emission from Polycrystalline Cu and Large-Grain NB Surfaces”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2384-2386.
- S. Sasaki, T. T. Nakamura, and M. Hirose, “Monitoring System for IT Infrastructure and EPICS Control System at SuperKEKB”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1417.
- B. E. Carlsten, “Photoelectric Injector Design Code”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 313-316.
- H. C. Liu et al., “High Power Conditioning of the DTL-1 for CSNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4207-4209.
- S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
- W. Zhang, A. V. Soukas, and S. Y. Zhang, “Transient Analysis of the AGS-Booster Ring Dipole and Qudrupole Magnet System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 940-943.
- B. Hafizi, J. Penano, and P. Sprangle, “Lethargy in an Optically Guided FEL Amplifier”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH039, pp. XX-XX.
- N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
- N. Tokuda and S. Yamada, “New Formulation of the RFQ Radial Matching Section”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H18, pp. 313-315.
- H. von Jagwitz-Biegnitz, P. Beasley, O. Heid, D. C. Faircloth, A. J. Holmes, and R. G. Selway, “2D Wire Grid Integrated with Faraday Cup for Low Energy H- Beam Analysis at Siemens Novel Electrostatic Accelerator”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPF06, pp. 507-510.
- J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
- G. Penco, S. M. Lidia, and M. Trovo, “Ramping Longitudinal Distribution Studies for the FERMI@ELETTRA Injector”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH027, pp. 621-624.
- A. O. Borga et al., “The MicroTCA Acquisition and Processing Back-end for FERMI@Elettra Diagnostics”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEBHMUST01, pp. 634-637.
- L. Torino and U. Iriso, “Beam Shape Reconstruction Using Synchrotron Radiation Interferometry”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 589-592.
- C. Eckardt et al., “Polarimetry of 0.1 ÔÇô 130 MeV Electron Beams at the S-DALINAC”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD89, pp. 515-517.
- D. W. Storm et al., “Nevis Synchrocyclotron Beam Status Report”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1408-1411.
- D. Trbojevic and V. S. Morozov, “Innovative Superconducting Non Scaling Fixed Field Alternating Gradient Isocentric Gantry for Carbon Cancer Therapy”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS029, pp. 2544-2546.
- M. K. Bock et al., “Benchmarking the Performance of the Present Bunch Arrival Time Monitors at FLASH”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD28, pp. 365-367.
- T. Tran Ngoc and R. M. Hutcheon, “Study of High-Strength Coppers for RFQ1's New Vanes”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO403, pp. 45-47.
- M. L. Rossi, A. J. Favale, F. J. Lotito, and F. R. Swanson, “A Wide Area Electron Beam Scanner”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 279-282.
- N. Yu. Kazarinov, “Coupling Resonance Qx-Qy=0 and Its Correction in Axial Injection Channel of the Cyclotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP100, pp. 5014-5016.
- K. Pieterman, J. A. M. Dam, C. Commeaux, and C. Penco, “Low Temperature Tests of the AGOR Superconducting Coil System”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XB-01, pp. 557-560.
- A. Ropert, “Lifetime Modelling at APS and ESRF”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP29, pp. 2328-2330.
- Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Low Energy Positron Storage Ring for Positronium Generation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP07B, pp. 853-855.
- F. Wolfheimer, E. Gjonaj, and T. Weiland, “Parallel Particle-In-Cell (OIC) Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM1MP02, pp. 290-295.
- J. Steimel, R. L. Madrak, R. J. Pasquinelli, E. Peoples-Evans, R. C. Webber, and D. Wildman, “Status and Specifications of a Project X Front-End Accelerator Test Facility at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEOBS6, pp. 1430-1432.
- I. Roth, N. Butler, M. P. J. Gaudreau, and M. K. Kempkes, “Robust High-average-power Modulator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA067, pp. 834-836.
- C. Deibele et al., “Experimental Tests of a Prototype System for Active Damping of the E-P Instability at the LANL PSR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEXC01, pp. 1991-1995.
- A. Orzhekhovskaya et al., “An Ion Beam Matching to a Linac Accelerating-focusing Channel”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS028, pp. 661-663.
- M. W. Lin and I. Jovanovic, “Modeling of Quasi-phase Matching in an Aperiodic Corrugated Plasma Waveguide for High-efficiency Direct Laser Electron Acceleration”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP014, pp. 2750-2752.
- T. Fowler, J. C. Freze, D. Grier, K-D. Metzmacher, and L. Sermeus, “Kickers Used for Bunched e?e- Beam Transfer in the CERN PS Complex”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 408-411.
- X. Zhou, T. Natsui, Y. Ogawa, M. Yoshida, and R. Zhang, “Developing an Yb/Nd Doped Hybrid Solid Laser of RF Gun for SuperKEKB Phase II Commissioning”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4540-4543.
- N. Nishimori, R. Hajima, R. Nagai, and M. Sawamura, “Development of a Multialkali Photocathode DC Gun for High Current Operation”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 29-32.
- P. Gladkikh et al., “Lattice Design for the Compact X-Ray Source based on Compton Scattering”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2B11, pp. 696-698.
- Y. H. Xu, Z. H. Sun, D. V. Campen, W. J. Corbett, C. L. Li, and W. J. Zhang, “Time Response of a Gridded X-ray Beam Ionization Chamber”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4220-4222.
- R. Parodi, P. Fabbricatore, G. Gemme, and R. Musenich, “Microwave Performances of Two Cavities Fully Coated by YBCO”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I29, pp. XX-XX.
- B. Faatz, “Results and Lessons from FLASH”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOBAU02, pp. XX-XX.
- A. Lasheen, T. Argyropoulos, J. Repond, and E. N. Shaposhnikova, “Effect of the Various Impedances on Longitudinal Beam Stability in the CERN SPS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1666-1669.
- M. Takao, J. Schimizu, Y. Shimosaki, and K. Soutome, “Impact of Nonlinear Resonances on Beam Dynamics at the SPring-8 Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC069, pp. 2181-2183.
- S. Golge and B. Vlahovic, “REVIEWOF LOW-ENERGY POSITRON BEAM FACILITIES”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD025, pp. 1464-1466.
- L. C. Steinhauer, W. D. Kimura, and R. D. Romea, “A New Look at Inverse Cerenkov Acceleration and Vacuum Laser Acceleration”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 558-561.
- Y. Morita et al., “Upgrading magnet power supply system in J-PARC main ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM082, pp. 3762-3765.
- E. G. Souza, A. Endler, R. Pakter, and F. B. Rizzato, “An Analytical Lagrangian Model for Analyzing Temperature Effects in Intense Non-neutral Beams”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS023, pp. 646-648.
- E. M. Ivanov and G. A. Riabov, “Experimental Determination of the External Beam Matrix on 1 GeV Synchrocyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-25, pp. 243-245.
- J. Schwartz, “Next Generation Superconductors for Accelerator Magnets”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRYKI02, pp. 3750-3750.
- W. Xu et al., “Design, Simulation and Conditioning of the Fundamental Power Couplers for BNL SRF Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC114, pp. 2489-2491.
- K. Seiya, S. Chaurize, C. C. Drennan, W. Pellico, A. K. Triplett, and A. M. Waller, “Development of Cogging at the Fermilab Booster”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2109-2111.
- X. P. Ding, H. G. Kirk, K. T. McDonald, C. T. Rogers, P. Snopok, and N. Souchlas, “Energy Deposition in Magnets and Shielding of the Target System of a Staged Neutrino Factory”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA10, pp. 1376-1378.
- D. Kostin et al., “S1-Global Module Tests at STF/KEK”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOODA02, pp. 38-40.
- T. Morishita, H. Asano, K. Hasegawa, M. Ikegami, and A. Ueno, “The Precise Survey and the Alignment Results of the J-PARC Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN059, pp. 1520-1522.
- M. Cavenago et al., “A RFQ Cooler Development”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3627-3630.
- M. Popovic et al., “Compact, Tunable RF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP105, pp. 802-804.
- J. Pfingstner, A. Latina, and D. Schulte, “Imperfection Tolerances for On-line Dispersion Free Steering in the Main Linac of CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME048, pp. 1673-1675.
- S. P. Kapitza, “Synchrotron Radiation Sources in the Soviet Union”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 405-409.
- V. A. Papadichev, “Accelerating and Transporting Attosecond and Femtosecond Bunches of Electrons”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP137, pp. 2815-2817.
- J.-G. Wang, N. Tsoupas, and M. Venturini, “3D Simulation Studies of SNS Ring Doublet Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT072, pp. 3865-3867.
- D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 112-115.
- H. Kuboki, J. Takano, M. Tejima, T. Toyama, and S. Hatakeyama, “Beam Based Gain Calibration for Beam Position Monitor at J-PARC Main Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 927-929.
- J. Rossbach, “Short Wavelength SASE FEL: Experiment vs. Theory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZBAB02, pp. 94-98.
- S. N. Twum et al., “Implementing an Event Tracing Solution with Consistently Formatted Logs for the SKA Telescope Control System”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 311-316.
- G. Stancari, G. Annala, T. R. Johnson, D. A. Still, and A. Valishev, “Measurements of Transverse Beam Diffusion Rates in the Fermilab Tevatron Collider”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ033, pp. 1882-1884.
- P. Anger et al., “Irradiation Control of the quot;SPIRALquot; Target by Measuring the Ion Beam Intensity via a Fast Current Transformer.”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT028, pp. XX-XX.
- Y. Yan, C. Wang, Z. Wang, L. Zhao, and Y. Zhu, “The Beamline Experiments Scheduling Software”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL003, pp. 33-35.
- S. I. Baker, E. F. Moore, R. C. Pardo, and G. Savard, “Fission Fragment Ion Source Radiation Protection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP093, pp. 3669-3671.
- A. V. Mishin, “Design and Application of Microwave Structures for Low Velocity Particles”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP62, pp. 812-814.
- M. F. Fernandes et al., “A Cryogenic Current Comparator for the Low-Energy Antiproton Facilities at CERN”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 143-147.
- M. BastaniNejad et al., “Field Emission Measurements from Niobium Electrodes”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP287, pp. 2020-2022.
- H. Schlarb, C. Gerth, W. Koprek, F. Loehl, and E. Vogel, “Beam Based Measurements of RF Phase and Amplitude Stability at FLASH”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC01, pp. 307-309.
- S. Takahashi, T. Shintake, T. Saeki, K. Onoe, and T. Inagaki, “Precise Temperature Regulation System for C-Band Accelerating Structure”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16051, pp. XX-XX.
- Y. Zhang and J. Qiang, “Simulation Studies of Beam-Beam Effects of a Ring-Ring Electron-Ion Collider Based on CEBAF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP067, pp. 2653-2655.
- D. J. Clark and C. M. Lyneis, “Operation of the LBL ECR Source Injection System”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-09, pp. 499-502.
- V. M. Rybin, “Analysis, Choice and Design of Monitors for Beam Diagnostics”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP61, pp. 485-486.
- W. K. H. Panofsky, “The Stanford Recirculating Linear Accelerator”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G04, pp. 175-181.
- P. Duval, H. Wu, and J. Bobnar, “Common Device Interface 2.0”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO207, pp. 144-146.
- E. N. Zaplatin, “Project X Elliptical Cavity Structural Analyses”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP031, pp. 868-870.
- J. M. Dolique and J.-C. Coacolo, “Self-field-limiting Current Density in the Field-photoemission of Intense Short Relativistic Electron”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 771-774.
- G. Neil, “Energy Recovery Linacs for Light Source Applications”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOCS1, pp. 761-765.
- R. J. Yarema, “A Four Quadrant Magnet Power Supply for Superconducting and Conventional Accelerator Applications”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2809-2812.
Back to search